From: Brian King <brking@linux.vnet.ibm.com>
To: Wayne Boyer <wayneb@linux.vnet.ibm.com>
Cc: James Bottomley <James.Bottomley@suse.de>,
linux-scsi <linux-scsi@vger.kernel.org>
Subject: Re: [PATCH 1/1] ipr: add endian swap enablement for 64 bit adapters
Date: Fri, 04 Jun 2010 13:35:48 -0500 [thread overview]
Message-ID: <4C094784.5000304@linux.vnet.ibm.com> (raw)
In-Reply-To: <4C09375A.4050304@linux.vnet.ibm.com>
Acked-by: Brian King <brking@linux.vnet.ibm.com>
On 06/04/2010 12:26 PM, Wayne Boyer wrote:
> A change in the hardware design of the chip for the new adapters changes the
> default endianness of MMIO operations. This patch adds a register definition
> which when written to with a predefined value will change the endianness
> back to what the driver expects.
>
> This patch also fixes two problems found during testing.
>
> First, the first reserved field in the ipr_hostrcb64_fabirc_desc structure only
> reserved one byte. The correct amount to reserve is 2 bytes.
>
> Second, the reserved field of the ipr_hostrcb64_error structure only reserved
> 2 bytes. The correct amount to reserve is 16 bytes.
>
> Signed-off-by: Wayne Boyer <wayneb@linux.vnet.ibm.com>
> ---
>
> drivers/scsi/ipr.c | 19 +++++++++++++++++--
> drivers/scsi/ipr.h | 9 +++++++--
> 2 files changed, 24 insertions(+), 4 deletions(-)
>
> Index: b/drivers/scsi/ipr.c
> ===================================================================
> --- a/drivers/scsi/ipr.c 2010-06-03 15:31:59.000000000 -0700
> +++ b/drivers/scsi/ipr.c 2010-06-03 15:48:52.000000000 -0700
> @@ -167,7 +167,8 @@ static const struct ipr_chip_cfg_t ipr_c
> .clr_uproc_interrupt_reg32 = 0x0002C,
> .init_feedback_reg = 0x0005C,
> .dump_addr_reg = 0x00064,
> - .dump_data_reg = 0x00068
> + .dump_data_reg = 0x00068,
> + .endian_swap_reg = 0x00084
> }
> },
> };
> @@ -7205,6 +7206,12 @@ static int ipr_reset_enable_ioa(struct i
> ipr_init_ioa_mem(ioa_cfg);
>
> ioa_cfg->allow_interrupts = 1;
> + if (ioa_cfg->sis64) {
> + /* Set the adapter to the correct endian mode. */
> + writel(IPR_ENDIAN_SWAP_KEY, ioa_cfg->regs.endian_swap_reg);
> + int_reg = readl(ioa_cfg->regs.endian_swap_reg);
> + }
> +
> int_reg = readl(ioa_cfg->regs.sense_interrupt_reg32);
>
> if (int_reg & IPR_PCII_IOA_TRANS_TO_OPER) {
> @@ -7362,6 +7369,7 @@ static void ipr_get_unit_check_buffer(st
> static int ipr_reset_restore_cfg_space(struct ipr_cmnd *ipr_cmd)
> {
> struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg;
> + volatile u32 int_reg;
> int rc;
>
> ENTER;
> @@ -7380,6 +7388,12 @@ static int ipr_reset_restore_cfg_space(s
>
> ipr_fail_all_ops(ioa_cfg);
>
> + if (ioa_cfg->sis64) {
> + /* Set the adapter to the correct endian mode. */
> + writel(IPR_ENDIAN_SWAP_KEY, ioa_cfg->regs.endian_swap_reg);
> + int_reg = readl(ioa_cfg->regs.endian_swap_reg);
> + }
> +
> if (ioa_cfg->ioa_unit_checked) {
> ioa_cfg->ioa_unit_checked = 0;
> ipr_get_unit_check_buffer(ioa_cfg);
> @@ -7544,7 +7558,7 @@ static int ipr_reset_wait_to_start_bist(
> }
>
> /**
> - * ipr_reset_alert_part2 - Alert the adapter of a pending reset
> + * ipr_reset_alert - Alert the adapter of a pending reset
> * @ipr_cmd: ipr command struct
> *
> * Description: This function alerts the adapter that it will be reset.
> @@ -8315,6 +8329,7 @@ static void __devinit ipr_init_ioa_cfg(s
> t->init_feedback_reg = base + p->init_feedback_reg;
> t->dump_addr_reg = base + p->dump_addr_reg;
> t->dump_data_reg = base + p->dump_data_reg;
> + t->endian_swap_reg = base + p->endian_swap_reg;
> }
> }
>
> Index: b/drivers/scsi/ipr.h
> ===================================================================
> --- a/drivers/scsi/ipr.h 2010-06-03 15:41:13.000000000 -0700
> +++ b/drivers/scsi/ipr.h 2010-06-03 15:48:52.000000000 -0700
> @@ -996,7 +996,7 @@ struct ipr_hostrcb64_fabric_desc {
> __be16 length;
> u8 descriptor_id;
>
> - u8 reserved;
> + u8 reserved[2];
> u8 path_state;
>
> u8 reserved2[2];
> @@ -1054,7 +1054,7 @@ struct ipr_hostrcb64_error {
> __be64 fd_lun;
> u8 fd_res_path[8];
> __be64 time_stamp;
> - u8 reserved[2];
> + u8 reserved[16];
> union {
> struct ipr_hostrcb_type_ff_error type_ff_error;
> struct ipr_hostrcb_type_12_error type_12_error;
> @@ -1254,6 +1254,9 @@ struct ipr_interrupt_offsets {
>
> unsigned long dump_addr_reg;
> unsigned long dump_data_reg;
> +
> +#define IPR_ENDIAN_SWAP_KEY 0x000C0C00
> + unsigned long endian_swap_reg;
> };
>
> struct ipr_interrupts {
> @@ -1279,6 +1282,8 @@ struct ipr_interrupts {
>
> void __iomem *dump_addr_reg;
> void __iomem *dump_data_reg;
> +
> + void __iomem *endian_swap_reg;
> };
>
> struct ipr_chip_cfg_t {
>
--
Brian King
Linux on Power Virtualization
IBM Linux Technology Center
prev parent reply other threads:[~2010-06-04 18:35 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <20100604155641.160590652@linux.vnet.ibm.com>
2010-06-04 17:26 ` [PATCH 1/1] ipr: add endian swap enablement for 64 bit adapters Wayne Boyer
2010-06-04 18:35 ` Brian King [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4C094784.5000304@linux.vnet.ibm.com \
--to=brking@linux.vnet.ibm.com \
--cc=James.Bottomley@suse.de \
--cc=linux-scsi@vger.kernel.org \
--cc=wayneb@linux.vnet.ibm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).