From: Brian King <brking@linux.vnet.ibm.com>
To: Wayne Boyer <wayneb@linux.vnet.ibm.com>
Cc: James Bottomley <James.Bottomley@suse.de>,
linux-scsi <linux-scsi@vger.kernel.org>,
Kleber Sacilotto de Souza <klebers@linux.vnet.ibm.com>
Subject: Re: [PATCH 1/2] ipr: fix resource address formatting and add attribute for device ID
Date: Wed, 11 Aug 2010 09:32:02 -0500 [thread overview]
Message-ID: <4C62B462.8030906@linux.vnet.ibm.com> (raw)
In-Reply-To: <4C62B075.4000309@linux.vnet.ibm.com>
Acked-by: Brian King <brking@linux.vnet.ibm.com>
On 08/11/2010 09:15 AM, Wayne Boyer wrote:
> On 8/10/10 1:32 PM, Brian King wrote:
>> On 08/10/2010 11:12 AM, Wayne Boyer wrote:
>>> Index: b/drivers/scsi/ipr.h
>>> ===================================================================
>>> --- a/drivers/scsi/ipr.h 2010-08-05 11:23:35.000000000 -0700
>>> +++ b/drivers/scsi/ipr.h 2010-08-09 10:09:04.000000000 -0700
>>> @@ -372,7 +372,7 @@ struct ipr_config_table_entry {
>>>
>>> struct ipr_res_addr res_addr;
>>> __be32 res_handle;
>>> - __be32 reserved4[2];
>>> + __be64 lun_wwn;
>
>>
>> This should be two __be32's or just an array of u8's instead,
>> since this field is not aligned on an 8 byte boundary. You can
>> use the unaligned accessors to make it easier to deal with.
>>
>
> Here's the updated patch. The field in question was lun_wwn in the
> ipr_res_addr structure.
>
> ---
>
> This patch fixes a resource address formatting problem where the first byte
> was being zeroed out.
>
> Also, the device ID is now made available as a sysfs attribute.
>
> Signed-off-by: Wayne Boyer <wayneb@linux.vnet.ibm.com>
> Acked-by: Brian King <brking@linux.vnet.ibm.com>
> ---
>
> drivers/scsi/ipr.c | 43 ++++++++++++++++++++++++++++++++++++++++++-
> drivers/scsi/ipr.h | 4 +++-
> 2 files changed, 45 insertions(+), 2 deletions(-)
>
> Index: b/drivers/scsi/ipr.c
> ===================================================================
> --- a/drivers/scsi/ipr.c 2010-08-02 17:28:18.000000000 -0700
> +++ b/drivers/scsi/ipr.c 2010-08-10 17:04:51.000000000 -0700
> @@ -1096,6 +1096,7 @@ static void ipr_init_res_entry(struct ip
> res->bus = cfgtew->u.cfgte->res_addr.bus;
> res->target = cfgtew->u.cfgte->res_addr.target;
> res->lun = cfgtew->u.cfgte->res_addr.lun;
> + res->lun_wwn = get_unaligned_be64(cfgtew->u.cfgte->lun_wwn);
> }
>
> ipr_update_ata_class(res, proto);
> @@ -1142,7 +1143,7 @@ static char *ipr_format_res_path(u8 *res
> int i;
> char *p = buffer;
>
> - res_path[0] = '\0';
> + *p = '\0';
> p += snprintf(p, buffer + len - p, "%02X", res_path[0]);
> for (i = 1; res_path[i] != 0xff && ((i * 3) < len); i++)
> p += snprintf(p, buffer + len - p, "-%02X", res_path[i]);
> @@ -4086,6 +4087,7 @@ static int ipr_change_queue_type(struct
> /**
> * ipr_show_adapter_handle - Show the adapter's resource handle for this device
> * @dev: device struct
> + * @attr: device attribute structure
> * @buf: buffer
> *
> * Return value:
> @@ -4119,6 +4121,7 @@ static struct device_attribute ipr_adapt
> * ipr_show_resource_path - Show the resource path or the resource address for
> * this device.
> * @dev: device struct
> + * @attr: device attribute structure
> * @buf: buffer
> *
> * Return value:
> @@ -4156,8 +4159,45 @@ static struct device_attribute ipr_resou
> };
>
> /**
> + * ipr_show_device_id - Show the device_id for this device.
> + * @dev: device struct
> + * @attr: device attribute structure
> + * @buf: buffer
> + *
> + * Return value:
> + * number of bytes printed to buffer
> + **/
> +static ssize_t ipr_show_device_id(struct device *dev, struct device_attribute *attr, char *buf)
> +{
> + struct scsi_device *sdev = to_scsi_device(dev);
> + struct ipr_ioa_cfg *ioa_cfg = (struct ipr_ioa_cfg *)sdev->host->hostdata;
> + struct ipr_resource_entry *res;
> + unsigned long lock_flags = 0;
> + ssize_t len = -ENXIO;
> +
> + spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags);
> + res = (struct ipr_resource_entry *)sdev->hostdata;
> + if (res && ioa_cfg->sis64)
> + len = snprintf(buf, PAGE_SIZE, "0x%llx\n", res->dev_id);
> + else if (res)
> + len = snprintf(buf, PAGE_SIZE, "0x%llx\n", res->lun_wwn);
> +
> + spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
> + return len;
> +}
> +
> +static struct device_attribute ipr_device_id_attr = {
> + .attr = {
> + .name = "device_id",
> + .mode = S_IRUGO,
> + },
> + .show = ipr_show_device_id
> +};
> +
> +/**
> * ipr_show_resource_type - Show the resource type for this device.
> * @dev: device struct
> + * @attr: device attribute structure
> * @buf: buffer
> *
> * Return value:
> @@ -4192,6 +4232,7 @@ static struct device_attribute ipr_resou
> static struct device_attribute *ipr_dev_attrs[] = {
> &ipr_adapter_handle_attr,
> &ipr_resource_path_attr,
> + &ipr_device_id_attr,
> &ipr_resource_type_attr,
> NULL,
> };
> Index: b/drivers/scsi/ipr.h
> ===================================================================
> --- a/drivers/scsi/ipr.h 2010-08-05 11:23:35.000000000 -0700
> +++ b/drivers/scsi/ipr.h 2010-08-10 22:03:14.000000000 -0700
> @@ -26,6 +26,7 @@
> #ifndef _IPR_H
> #define _IPR_H
>
> +#include <asm/unaligned.h>
> #include <linux/types.h>
> #include <linux/completion.h>
> #include <linux/libata.h>
> @@ -372,7 +373,7 @@ struct ipr_config_table_entry {
>
> struct ipr_res_addr res_addr;
> __be32 res_handle;
> - __be32 reserved4[2];
> + __be32 lun_wwn[2];
> struct ipr_std_inq_data std_inq_data;
> }__attribute__ ((packed, aligned (4)));
>
> @@ -1210,6 +1211,7 @@ struct ipr_resource_entry {
>
> __be32 res_handle;
> __be64 dev_id;
> + __be64 lun_wwn;
> struct scsi_lun dev_lun;
> u8 res_path[8];
>
>
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
Brian King
Linux on Power Virtualization
IBM Linux Technology Center
next prev parent reply other threads:[~2010-08-11 14:32 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <20100810160721.438853503@linux.vnet.ibm.com>
2010-08-10 16:12 ` [PATCH 1/2] ipr: fix resource address formatting and add attribute for device ID Wayne Boyer
2010-08-10 20:32 ` Brian King
2010-08-11 14:15 ` Wayne Boyer
2010-08-11 14:32 ` Brian King [this message]
2010-08-10 16:13 ` [PATCH 2/2] ipr: Driver version 2.5.1 Wayne Boyer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4C62B462.8030906@linux.vnet.ibm.com \
--to=brking@linux.vnet.ibm.com \
--cc=James.Bottomley@suse.de \
--cc=klebers@linux.vnet.ibm.com \
--cc=linux-scsi@vger.kernel.org \
--cc=wayneb@linux.vnet.ibm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).