linux-scsi.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Tomas Henzl <thenzl@redhat.com>
To: "'linux-scsi@vger.kernel.org'" <linux-scsi@vger.kernel.org>
Cc: nick.cheng@areca.com.tw
Subject: [PATCH 2/2] arcmsr: code cleanup and some corrections
Date: Thu, 10 Feb 2011 15:36:31 +0100	[thread overview]
Message-ID: <4D53F7EF.70003@redhat.com> (raw)
In-Reply-To: <4D53F4B7.2030806@redhat.com>

Hi Nick,
I'm confused with what this code does, I think I must miss something.

	dma_coherent = dma_alloc_coherent(&pdev->dev, acb->uncache_size, &dma_coherent_handle, GFP_KERNEL);
...
I think that the dma_alloc_coherent returns a page address with zeroes in the lowest bits 
That would mean the offset computed below is useless as the result is zero every time.
Added to that is that you then increase dma_coherent_handle by the offset,
while dma_coherent is increased by multiples of sizeof CommandControlBlock, at least it looks so
...
	offset = roundup((unsigned long)dma_coherent, 32) - (unsigned long)dma_coherent;
	dma_coherent_handle = dma_coherent_handle + offset;
	dma_coherent = (struct CommandControlBlock *)dma_coherent + offset;

The patch below removes the offset computation.

Signed-off-by: Tomas henzl <thenzl@redhat.com>


diff --git a/drivers/scsi/arcmsr/arcmsr_hba.c b/drivers/scsi/arcmsr/arcmsr_hba.c
index 4cd522b..da93974 100644
--- a/drivers/scsi/arcmsr/arcmsr_hba.c
+++ b/drivers/scsi/arcmsr/arcmsr_hba.c
@@ -441,10 +441,11 @@ static int arcmsr_alloc_ccb_pool(struct AdapterControlBlock *acb)
 	struct CommandControlBlock *ccb_tmp;
 	int i = 0, j = 0;
 	dma_addr_t cdb_phyaddr;
-	unsigned long roundup_ccbsize = 0, offset;
+	unsigned long roundup_ccbsize;
 	unsigned long max_xfer_len;
 	unsigned long max_sg_entrys;
 	uint32_t  firm_config_version;
+
 	for (i = 0; i < ARCMSR_MAX_TARGETID; i++)
 		for (j = 0; j < ARCMSR_MAX_TARGETLUN; j++)
 			acb->devstate[i][j] = ARECA_RAID_GONE;
@@ -454,12 +455,12 @@ static int arcmsr_alloc_ccb_pool(struct AdapterControlBlock *acb)
 	firm_config_version = acb->firm_cfg_version;
 	if((firm_config_version & 0xFF) >= 3){
 		max_xfer_len = (ARCMSR_CDB_SG_PAGE_LENGTH << ((firm_config_version >> 8) & 0xFF)) * 1024;/* max 4M byte */
-		max_sg_entrys = (max_xfer_len/4096);	
+		max_sg_entrys = (max_xfer_len/4096);
 	}
 	acb->host->max_sectors = max_xfer_len/512;
 	acb->host->sg_tablesize = max_sg_entrys;
 	roundup_ccbsize = roundup(sizeof(struct CommandControlBlock) + (max_sg_entrys - 1) * sizeof(struct SG64ENTRY), 32);
-	acb->uncache_size = roundup_ccbsize * ARCMSR_MAX_FREECCB_NUM + 32;
+	acb->uncache_size = roundup_ccbsize * ARCMSR_MAX_FREECCB_NUM;
 	dma_coherent = dma_alloc_coherent(&pdev->dev, acb->uncache_size, &dma_coherent_handle, GFP_KERNEL);
 	if(!dma_coherent){
 		printk(KERN_NOTICE "arcmsr%d: dma_alloc_coherent got error \n", acb->host->host_no);
@@ -468,9 +469,6 @@ static int arcmsr_alloc_ccb_pool(struct AdapterControlBlock *acb)
 	acb->dma_coherent = dma_coherent;
 	acb->dma_coherent_handle = dma_coherent_handle;
 	memset(dma_coherent, 0, acb->uncache_size);
-	offset = roundup((unsigned long)dma_coherent, 32) - (unsigned long)dma_coherent;
-	dma_coherent_handle = dma_coherent_handle + offset;
-	dma_coherent = (struct CommandControlBlock *)dma_coherent + offset;
 	ccb_tmp = dma_coherent;
 	acb->vir2phy_offset = (unsigned long)dma_coherent - (unsigned long)dma_coherent_handle;
 	for(i = 0; i < ARCMSR_MAX_FREECCB_NUM; i++){



  reply	other threads:[~2011-02-10 14:36 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2011-02-10 14:22 [PATCH 1/2] arcmsr: code cleanup and some corrections Tomas Henzl
2011-02-10 14:36 ` Tomas Henzl [this message]
2011-02-11  1:44   ` [PATCH 2/2] " NickCheng
2011-02-17 15:05     ` Tomas Henzl
2011-02-18  1:04       ` FUJITA Tomonori
2011-02-18 10:59         ` Tomas Henzl
2011-02-24 14:14           ` Tomas Henzl
2011-02-25  1:30             ` NickCheng
2011-02-17 15:07 ` [PATCH 1/2] " Tomas Henzl
2011-02-18  1:26   ` NickCheng
2011-02-18 11:04     ` Tomas Henzl
2011-02-18 11:36       ` NickCheng
2011-02-24  2:02   ` NickCheng
2011-02-24 14:09     ` Tomas Henzl
2011-02-25  1:30       ` NickCheng

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=4D53F7EF.70003@redhat.com \
    --to=thenzl@redhat.com \
    --cc=linux-scsi@vger.kernel.org \
    --cc=nick.cheng@areca.com.tw \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).