From mboxrd@z Thu Jan 1 00:00:00 1970 From: Artem Bokhan Subject: LSI SAS2008-based controller does not export disks behind raid Date: Thu, 17 Feb 2011 19:58:17 +0600 Message-ID: <4D5D2979.1000609@ngs.ru> Mime-Version: 1.0 Content-Type: text/plain; charset=UTF-8; format=flowed Content-Transfer-Encoding: 7bit Return-path: Received: from smtpout10.ngs.ru ([195.93.186.216]:13897 "EHLO smtpout.ngs.ru" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1750925Ab1BQN6j (ORCPT ); Thu, 17 Feb 2011 08:58:39 -0500 Received: from [192.168.12.34] (unknown [192.168.12.34]) (using TLSv1 with cipher DHE-RSA-AES256-SHA (256/256 bits)) (No client certificate requested) (Authenticated sender: aptem@ngs.ru) by mail.ngs.ru (smtp) with ESMTP id DB56A179DB819D for ; Thu, 17 Feb 2011 19:58:30 +0600 (NOVT) Sender: linux-scsi-owner@vger.kernel.org List-Id: linux-scsi@vger.kernel.org To: linux-scsi@vger.kernel.org Hello. I have LSI SAS2008-based controller (mpt2sas driver). Old firmware exports disks behind raid so they could be read by smartmontools, new one does not. Is this firmware-only issue or behaviour could be forced by driver? Old behavior: [...] Feb 2 23:57:03 ubuntu kernel: [ 3.745023] mpt2sas0: LSISAS2008: FWVersion(04.00.00.00), ChipRevision(0x02), BiosVersion(07.03.00.00) Feb 2 23:57:03 ubuntu kernel: [ 3.745028] mpt2sas0: Protocol=(Initiator,Target), Capabilities=(Raid,TLR,EEDP,Snapshot Buffer,Diag Trace Buffer,Task Set Full,NCQ) Feb 2 23:57:03 ubuntu kernel: [ 3.745095] mpt2sas0: sending port enable !! Feb 2 23:57:03 ubuntu kernel: [ 5.473091] mpt2sas0: host_add: handle(0x0001), sas_addr(0x50030480004c4df0), phys(8) Feb 2 23:57:03 ubuntu kernel: [ 7.108617] scsi 7:0:0:0: CD-ROM TEAC DV-W28S-V D.0A PQ: 0 ANSI: 0 Feb 2 23:57:03 ubuntu kernel: [ 7.119447] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray Feb 2 23:57:03 ubuntu kernel: [ 7.119453] Uniform CD-ROM driver Revision: 3.20 Feb 2 23:57:03 ubuntu kernel: [ 7.119639] sr 7:0:0:0: Attached scsi generic sg0 type 5 Feb 2 23:57:03 ubuntu kernel: [ 12.707672] mpt2sas0: port enable: SUCCESS Feb 2 23:57:03 ubuntu kernel: [ 13.086899] scsi 0:1:0:0: Direct-Access LSI Logical Volume 3000 PQ: 0 ANSI: 6 Feb 2 23:57:03 ubuntu kernel: [ 13.088373] scsi 0:1:0:0: RAID1: handle(0x0143), wwid(0x0c73dae32c7319bf), pd_count(2), type(SATA) Feb 2 23:57:03 ubuntu kernel: [ 13.088380] scsi 0:1:0:0: qdepth(128), tagged(1), simple(1), ordered(0), scsi_level(7), cmd_que(1) Feb 2 23:57:03 ubuntu kernel: [ 13.088543] sd 0:1:0:0: Attached scsi generic sg1 type 0 Feb 2 23:57:03 ubuntu kernel: [ 13.088899] sd 0:1:0:0: [sda] 488280064 512-byte logical blocks: (249 GB/232 GiB) Feb 2 23:57:03 ubuntu kernel: [ 13.089446] sd 0:1:0:0: [sda] Write Protect is off Feb 2 23:57:03 ubuntu kernel: [ 13.089685] sd 0:1:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA Feb 2 23:57:03 ubuntu kernel: [ 13.090558] sda: Feb 2 23:57:03 ubuntu kernel: [ 13.090770] scsi 0:0:0:0: Direct-Access ATA WDC WD2502ABYS-0 3B03 PQ: 0 ANSI: 5 ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ Feb 2 23:57:03 ubuntu kernel: [ 13.091155] scsi 0:0:0:0: SATA: handle(0x0009), sas_addr(0x4433221102000000), device_name(0x4ee15001ce3badae) Feb 2 23:57:03 ubuntu kernel: [ 13.091158] scsi 0:0:0:0: SATA: enclosure_logical_id(0x50030480004c4df0), slot(2) Feb 2 23:57:03 ubuntu kernel: [ 13.091355] scsi 0:0:0:0: atapi(n), ncq(y), asyn_notify(n), smart(y), fua(y), sw_preserve(y) Feb 2 23:57:03 ubuntu kernel: [ 13.091359] scsi 0:0:0:0: qdepth(32), tagged(1), simple(1), ordered(0), scsi_level(6), cmd_que(1) Feb 2 23:57:03 ubuntu kernel: [ 13.091430] scsi 0:0:0:0: Attached scsi generic sg2 type 0 ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ Feb 2 23:57:03 ubuntu kernel: [ 13.106287] sda1 sda2 < Feb 2 23:57:03 ubuntu kernel: [ 13.108938] scsi 0:0:1:0: Direct-Access ATA WDC WD2502ABYS-0 3B03 PQ: 0 ANSI: 5 ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ Feb 2 23:57:03 ubuntu kernel: [ 13.109311] sda5 > Feb 2 23:57:03 ubuntu kernel: [ 13.109622] scsi 0:0:1:0: SATA: handle(0x000a), sas_addr(0x4433221103000000), device_name(0x4ee15001d696030a) Feb 2 23:57:03 ubuntu kernel: [ 13.109628] scsi 0:0:1:0: SATA: enclosure_logical_id(0x50030480004c4df0), slot(3) Feb 2 23:57:03 ubuntu kernel: [ 13.109743] scsi 0:0:1:0: atapi(n), ncq(y), asyn_notify(n), smart(y), fua(y), sw_preserve(y) Feb 2 23:57:03 ubuntu kernel: [ 13.109747] scsi 0:0:1:0: qdepth(32), tagged(1), simple(1), ordered(0), scsi_level(6), cmd_que(1) Feb 2 23:57:03 ubuntu kernel: [ 13.109865] scsi 0:0:1:0: Attached scsi generic sg3 type 0 ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ Feb 2 23:57:03 ubuntu kernel: [ 13.110295] sd 0:1:0:0: [sda] Attached SCSI disk New behavior: Feb 3 10:50:11 ubuntu kernel: [ 3.684393] mpt2sas0: LSISAS2008: FWVersion(08.00.00.00), ChipRevision(0x02), BiosVersion(07.15.00.00) Feb 3 10:50:11 ubuntu kernel: [ 3.684397] mpt2sas0: Protocol=(Initiator,Target), Capabilities=(Raid,TLR,EEDP,Snapshot Buffer,Diag Trace Buffer,Task Set Fu ll,NCQ) Feb 3 10:50:11 ubuntu kernel: [ 3.684462] mpt2sas0: sending port enable !! Feb 3 10:50:11 ubuntu kernel: [ 5.198735] mpt2sas0: host_add: handle(0x0001), sas_addr(0x50030480004c4df0), phys(8) Feb 3 10:50:11 ubuntu kernel: [ 8.256411] scsi 7:0:0:0: CD-ROM TEAC DV-W28S-V D.0A PQ: 0 ANSI: 0 Feb 3 10:50:11 ubuntu kernel: [ 8.269509] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray Feb 3 10:50:11 ubuntu kernel: [ 8.269514] Uniform CD-ROM driver Revision: 3.20 Feb 3 10:50:11 ubuntu kernel: [ 8.269706] sr 7:0:0:0: Attached scsi generic sg0 type 5 Feb 3 10:50:11 ubuntu kernel: [ 11.061165] mpt2sas0: port enable: SUCCESS Feb 3 10:50:11 ubuntu kernel: [ 11.061688] scsi 0:1:0:0: Direct-Access LSI Logical Volume 3000 PQ: 0 ANSI: 6 Feb 3 10:50:11 ubuntu kernel: [ 11.062438] scsi 0:1:0:0: RAID1: handle(0x011e), wwid(0x0c73dae32c7319bf), pd_count(2), type(SATA) Feb 3 10:50:11 ubuntu kernel: [ 11.062444] scsi 0:1:0:0: qdepth(128), tagged(1), simple(1), ordered(0), scsi_level(7), cmd_que(1) Feb 3 10:50:11 ubuntu kernel: [ 11.062602] sd 0:1:0:0: Attached scsi generic sg1 type 0 Feb 3 10:50:11 ubuntu kernel: [ 11.063018] sd 0:1:0:0: [sda] 488280064 512-byte logical blocks: (249 GB/232 GiB) Feb 3 10:50:11 ubuntu kernel: [ 11.063312] sd 0:1:0:0: [sda] Write Protect is off Feb 3 10:50:11 ubuntu kernel: [ 11.063450] sd 0:1:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA Feb 3 10:50:11 ubuntu kernel: [ 11.063728] sda: sda1 sda2 < sda5 > Feb 3 10:50:11 ubuntu kernel: [ 11.087127] sd 0:1:0:0: [sda] Attached SCSI disk