[PATCH 0/4] qla4xxx feature updates

[PATCH 0/4] qla4xxx feature updates

[vikas.chaudhary]

From: Vikas Chaudhary <vikas.chaudhary@qlogic.com> 

James,

Following patches are made over scsi-misc and our ealier patchset
posted here: http://marc.info/?l=linux-scsi&m=131219494805315&w=2

Harish Zunjarrao (2):
	qla4xxx: Added restore factory defaults support using BSG
	qla4xxx: Added Get ACB support using BSG

Vikas Chaudhary (2):
	scsi: Added support for adapter and firmware reset
	qla4xxx: Added support for adapter and firmware reset

Thanks,
Vikas.

[PATCH 1/4] qla4xxx: Added restore factory defaults support using BSG

[vikas.chaudhary]

From: Harish Zunjarrao <harish.zunjarrao@qlogic.com>

This command will causes the firmware to update all
configurations to pre-defined factory default settings.

Signed-off-by: Harish Zunjarrao <harish.zunjarrao@qlogic.com>
Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com>
---
 drivers/scsi/qla4xxx/ql4_bsg.c  |   47 +++++++++++++++++++++++++++++++++++++++
 drivers/scsi/qla4xxx/ql4_bsg.h  |    1 +
 drivers/scsi/qla4xxx/ql4_glbl.h |    3 ++
 drivers/scsi/qla4xxx/ql4_mbx.c  |   26 +++++++++++++++++++++
 4 files changed, 77 insertions(+), 0 deletions(-)

diff --git a/drivers/scsi/qla4xxx/ql4_bsg.c b/drivers/scsi/qla4xxx/ql4_bsg.c
index c475453..4704a52 100644
--- a/drivers/scsi/qla4xxx/ql4_bsg.c
+++ b/drivers/scsi/qla4xxx/ql4_bsg.c
@@ -337,6 +337,50 @@ leave:
 	return rval;
 }
 
+static int
+qla4xxx_restore_defaults(struct bsg_job *bsg_job)
+{
+	struct Scsi_Host *host = iscsi_job_to_shost(bsg_job);
+	struct scsi_qla_host *ha = to_qla_host(host);
+	struct iscsi_bsg_request *bsg_req = bsg_job->request;
+	struct iscsi_bsg_reply *bsg_reply = bsg_job->reply;
+	uint32_t region = 0;
+	uint32_t field0 = 0;
+	uint32_t field1 = 0;
+	int rval = -EINVAL;
+
+	bsg_reply->reply_payload_rcv_len = 0;
+
+	if (unlikely(pci_channel_offline(ha->pdev)))
+		goto leave;
+
+	if (is_qla4010(ha))
+		goto leave;
+
+	if (ql4xxx_reset_active(ha)) {
+		ql4_printk(KERN_ERR, ha, "%s: reset active\n", __func__);
+		rval = -EBUSY;
+		goto leave;
+	}
+
+	region = bsg_req->rqst_data.h_vendor.vendor_cmd[1];
+	field0 = bsg_req->rqst_data.h_vendor.vendor_cmd[2];
+	field1 = bsg_req->rqst_data.h_vendor.vendor_cmd[3];
+
+	rval = qla4xxx_restore_factory_defaults(ha, region, field0, field1);
+	if (rval) {
+		ql4_printk(KERN_ERR, ha, "%s: set nvram failed\n", __func__);
+		bsg_reply->result = DID_ERROR << 16;
+		rval = -EIO;
+	} else
+		bsg_reply->result = DID_OK << 16;
+
+	bsg_job_done(bsg_job, bsg_reply->result,
+		     bsg_reply->reply_payload_rcv_len);
+leave:
+	return rval;
+}
+
 /**
  * qla4xxx_process_vendor_specific - handle vendor specific bsg request
  * @job: iscsi_bsg_job to handle
@@ -364,6 +408,9 @@ int qla4xxx_process_vendor_specific(struct bsg_job *bsg_job)
 	case QLISCSI_VND_UPDATE_NVRAM:
 		return qla4xxx_update_nvram(bsg_job);
 
+	case QLISCSI_VND_RESTORE_DEFAULTS:
+		return qla4xxx_restore_defaults(bsg_job);
+
 	default:
 		ql4_printk(KERN_ERR, ha, "%s: invalid BSG vendor command: "
 			   "0x%x\n", __func__, bsg_req->msgcode);
diff --git a/drivers/scsi/qla4xxx/ql4_bsg.h b/drivers/scsi/qla4xxx/ql4_bsg.h
index 71df80d..84a1391 100644
--- a/drivers/scsi/qla4xxx/ql4_bsg.h
+++ b/drivers/scsi/qla4xxx/ql4_bsg.h
@@ -13,5 +13,6 @@
 #define QLISCSI_VND_GET_ACB_STATE	3
 #define QLISCSI_VND_READ_NVRAM		4
 #define QLISCSI_VND_UPDATE_NVRAM	5
+#define QLISCSI_VND_RESTORE_DEFAULTS	6
 
 #endif
diff --git a/drivers/scsi/qla4xxx/ql4_glbl.h b/drivers/scsi/qla4xxx/ql4_glbl.h
index 35bd0c1..1a0f601 100644
--- a/drivers/scsi/qla4xxx/ql4_glbl.h
+++ b/drivers/scsi/qla4xxx/ql4_glbl.h
@@ -166,6 +166,9 @@ int qla4xxx_get_nvram(struct scsi_qla_host *ha, dma_addr_t nvram_dma,
 		      uint32_t offset, uint32_t size);
 int qla4xxx_set_nvram(struct scsi_qla_host *ha, dma_addr_t nvram_dma,
 		      uint32_t offset, uint32_t size);
+int qla4xxx_restore_factory_defaults(struct scsi_qla_host *ha,
+				     uint32_t region, uint32_t field0,
+				     uint32_t field1);
 
 /* BSG Functions */
 int qla4xxx_bsg_request(struct bsg_job *bsg_job);
diff --git a/drivers/scsi/qla4xxx/ql4_mbx.c b/drivers/scsi/qla4xxx/ql4_mbx.c
index e843758..dfc38aa 100644
--- a/drivers/scsi/qla4xxx/ql4_mbx.c
+++ b/drivers/scsi/qla4xxx/ql4_mbx.c
@@ -1744,3 +1744,29 @@ int qla4xxx_set_nvram(struct scsi_qla_host *ha, dma_addr_t nvram_dma,
 	}
 	return status;
 }
+
+int qla4xxx_restore_factory_defaults(struct scsi_qla_host *ha,
+				     uint32_t region, uint32_t field0,
+				     uint32_t field1)
+{
+	int status = QLA_SUCCESS;
+	uint32_t mbox_cmd[MBOX_REG_COUNT];
+	uint32_t mbox_sts[MBOX_REG_COUNT];
+
+	memset(&mbox_cmd, 0, sizeof(mbox_cmd));
+	memset(&mbox_sts, 0, sizeof(mbox_sts));
+
+	mbox_cmd[0] = MBOX_CMD_RESTORE_FACTORY_DEFAULTS;
+	mbox_cmd[3] = region;
+	mbox_cmd[4] = field0;
+	mbox_cmd[5] = field1;
+
+	status = qla4xxx_mailbox_command(ha, MBOX_REG_COUNT, 3, &mbox_cmd[0],
+					 &mbox_sts[0]);
+	if (status != QLA_SUCCESS) {
+		DEBUG2(ql4_printk(KERN_ERR, ha, "scsi%ld: %s: failed "
+				  "status %04X\n", ha->host_no, __func__,
+				  mbox_sts[0]));
+	}
+	return status;
+}
-- 
1.7.6

[PATCH 2/4] qla4xxx: Added Get ACB support using BSG

[vikas.chaudhary]

From: Harish Zunjarrao <harish.zunjarrao@qlogic.com>

This command is used to read ACB params from firmware

Signed-off-by: Harish Zunjarrao <harish.zunjarrao@qlogic.com>
Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com>
---
 drivers/scsi/qla4xxx/ql4_bsg.c  |   68 +++++++++++++++++++++++++++++++++++++++
 drivers/scsi/qla4xxx/ql4_bsg.h  |    1 +
 drivers/scsi/qla4xxx/ql4_glbl.h |    4 +-
 drivers/scsi/qla4xxx/ql4_mbx.c  |   15 +++++---
 4 files changed, 80 insertions(+), 8 deletions(-)

diff --git a/drivers/scsi/qla4xxx/ql4_bsg.c b/drivers/scsi/qla4xxx/ql4_bsg.c
index 4704a52..8acdc58 100644
--- a/drivers/scsi/qla4xxx/ql4_bsg.c
+++ b/drivers/scsi/qla4xxx/ql4_bsg.c
@@ -381,6 +381,71 @@ leave:
 	return rval;
 }
 
+static int
+qla4xxx_bsg_get_acb(struct bsg_job *bsg_job)
+{
+	struct Scsi_Host *host = iscsi_job_to_shost(bsg_job);
+	struct scsi_qla_host *ha = to_qla_host(host);
+	struct iscsi_bsg_request *bsg_req = bsg_job->request;
+	struct iscsi_bsg_reply *bsg_reply = bsg_job->reply;
+	uint32_t acb_type = 0;
+	uint32_t len = 0;
+	dma_addr_t acb_dma;
+	uint8_t *acb = NULL;
+	int rval = -EINVAL;
+
+	bsg_reply->reply_payload_rcv_len = 0;
+
+	if (unlikely(pci_channel_offline(ha->pdev)))
+		goto leave;
+
+	/* Only 4022 and above adapters are supported */
+	if (is_qla4010(ha))
+		goto leave;
+
+	if (ql4xxx_reset_active(ha)) {
+		ql4_printk(KERN_ERR, ha, "%s: reset active\n", __func__);
+		rval = -EBUSY;
+		goto leave;
+	}
+
+	acb_type = bsg_req->rqst_data.h_vendor.vendor_cmd[1];
+	len = bsg_job->reply_payload.payload_len;
+	if (len < sizeof(struct addr_ctrl_blk)) {
+		ql4_printk(KERN_ERR, ha, "%s: invalid acb len %d\n",
+			   __func__, len);
+		rval = -EINVAL;
+		goto leave;
+	}
+
+	acb = dma_alloc_coherent(&ha->pdev->dev, len, &acb_dma, GFP_KERNEL);
+	if (!acb) {
+		ql4_printk(KERN_ERR, ha, "%s: dma alloc failed for acb "
+			   "data\n", __func__);
+		rval = -ENOMEM;
+		goto leave;
+	}
+
+	rval = qla4xxx_get_acb(ha, acb_dma, acb_type, len);
+	if (rval) {
+		ql4_printk(KERN_ERR, ha, "%s: get acb failed\n", __func__);
+		bsg_reply->result = DID_ERROR << 16;
+		rval = -EIO;
+	} else {
+		bsg_reply->reply_payload_rcv_len =
+			sg_copy_from_buffer(bsg_job->reply_payload.sg_list,
+					    bsg_job->reply_payload.sg_cnt,
+					    acb, len);
+		bsg_reply->result = DID_OK << 16;
+	}
+
+	bsg_job_done(bsg_job, bsg_reply->result,
+		     bsg_reply->reply_payload_rcv_len);
+	dma_free_coherent(&ha->pdev->dev, len, acb, acb_dma);
+leave:
+	return rval;
+}
+
 /**
  * qla4xxx_process_vendor_specific - handle vendor specific bsg request
  * @job: iscsi_bsg_job to handle
@@ -411,6 +476,9 @@ int qla4xxx_process_vendor_specific(struct bsg_job *bsg_job)
 	case QLISCSI_VND_RESTORE_DEFAULTS:
 		return qla4xxx_restore_defaults(bsg_job);
 
+	case QLISCSI_VND_GET_ACB:
+		return qla4xxx_bsg_get_acb(bsg_job);
+
 	default:
 		ql4_printk(KERN_ERR, ha, "%s: invalid BSG vendor command: "
 			   "0x%x\n", __func__, bsg_req->msgcode);
diff --git a/drivers/scsi/qla4xxx/ql4_bsg.h b/drivers/scsi/qla4xxx/ql4_bsg.h
index 84a1391..c6a03645 100644
--- a/drivers/scsi/qla4xxx/ql4_bsg.h
+++ b/drivers/scsi/qla4xxx/ql4_bsg.h
@@ -14,5 +14,6 @@
 #define QLISCSI_VND_READ_NVRAM		4
 #define QLISCSI_VND_UPDATE_NVRAM	5
 #define QLISCSI_VND_RESTORE_DEFAULTS	6
+#define QLISCSI_VND_GET_ACB		7
 
 #endif
diff --git a/drivers/scsi/qla4xxx/ql4_glbl.h b/drivers/scsi/qla4xxx/ql4_glbl.h
index 1a0f601..160db9d 100644
--- a/drivers/scsi/qla4xxx/ql4_glbl.h
+++ b/drivers/scsi/qla4xxx/ql4_glbl.h
@@ -56,8 +56,8 @@ int qla4xxx_conn_close_sess_logout(struct scsi_qla_host *ha,
 int qla4xxx_disable_acb(struct scsi_qla_host *ha);
 int qla4xxx_set_acb(struct scsi_qla_host *ha, uint32_t *mbox_cmd,
 		    uint32_t *mbox_sts, dma_addr_t acb_dma);
-int qla4xxx_get_acb(struct scsi_qla_host *ha, uint32_t *mbox_cmd,
-		    uint32_t *mbox_sts, dma_addr_t acb_dma);
+int qla4xxx_get_acb(struct scsi_qla_host *ha, dma_addr_t acb_dma,
+		    uint32_t acb_type, uint32_t len);
 int qla4xxx_get_ip_state(struct scsi_qla_host *ha, uint32_t acb_idx,
 			 uint32_t ip_idx, uint32_t *sts);
 void qla4xxx_mark_device_missing(struct iscsi_cls_session *cls_session);
diff --git a/drivers/scsi/qla4xxx/ql4_mbx.c b/drivers/scsi/qla4xxx/ql4_mbx.c
index dfc38aa..de733a7 100644
--- a/drivers/scsi/qla4xxx/ql4_mbx.c
+++ b/drivers/scsi/qla4xxx/ql4_mbx.c
@@ -1425,18 +1425,21 @@ int qla4xxx_disable_acb(struct scsi_qla_host *ha)
 	return status;
 }
 
-int qla4xxx_get_acb(struct scsi_qla_host *ha, uint32_t *mbox_cmd,
-		    uint32_t *mbox_sts, dma_addr_t acb_dma)
+int qla4xxx_get_acb(struct scsi_qla_host *ha, dma_addr_t acb_dma,
+		    uint32_t acb_type, uint32_t len)
 {
+	uint32_t mbox_cmd[MBOX_REG_COUNT];
+	uint32_t mbox_sts[MBOX_REG_COUNT];
 	int status = QLA_SUCCESS;
 
-	memset(mbox_cmd, 0, sizeof(mbox_cmd[0]) * MBOX_REG_COUNT);
-	memset(mbox_sts, 0, sizeof(mbox_sts[0]) * MBOX_REG_COUNT);
+	memset(&mbox_cmd, 0, sizeof(mbox_cmd));
+	memset(&mbox_sts, 0, sizeof(mbox_sts));
+
 	mbox_cmd[0] = MBOX_CMD_GET_ACB;
-	mbox_cmd[1] = 0; /* Primary ACB */
+	mbox_cmd[1] = acb_type;
 	mbox_cmd[2] = LSDW(acb_dma);
 	mbox_cmd[3] = MSDW(acb_dma);
-	mbox_cmd[4] = sizeof(struct addr_ctrl_blk);
+	mbox_cmd[4] = len;
 
 	status = qla4xxx_mailbox_command(ha, 5, 5, &mbox_cmd[0], &mbox_sts[0]);
 	if (status != QLA_SUCCESS) {
-- 
1.7.6

[PATCH 3/4] scsi: Added support for adapter and firmware reset

[vikas.chaudhary]

From: Vikas Chaudhary <vikas.chaudhary@qlogic.com>

Added new sysfs attr 'host_reset' in scsi_sysfs.c to
perform adapter or firmware reset as suggested by
Mike Christie here:
http://marc.info/?l=linux-scsi&m=127359347111167&w=2

user/application can write "adapter" or "firmware" on
this attr and it will call newly added function hook
in scsi_host_template to call LDD adapter or firmware
reset implementation.

Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com>
---
 drivers/scsi/scsi_sysfs.c |   38 ++++++++++++++++++++++++++++++++++++++
 include/scsi/scsi_host.h  |   13 +++++++++++++
 2 files changed, 51 insertions(+), 0 deletions(-)

diff --git a/drivers/scsi/scsi_sysfs.c b/drivers/scsi/scsi_sysfs.c
index e0bd3f7..04c2a27 100644
--- a/drivers/scsi/scsi_sysfs.c
+++ b/drivers/scsi/scsi_sysfs.c
@@ -246,6 +246,43 @@ show_shost_active_mode(struct device *dev,
 
 static DEVICE_ATTR(active_mode, S_IRUGO | S_IWUSR, show_shost_active_mode, NULL);
 
+static int check_reset_type(char *str)
+{
+	if (strncmp(str, "adapter", 10) == 0)
+		return SCSI_ADAPTER_RESET;
+	else if (strncmp(str, "firmware", 10) == 0)
+		return SCSI_FIRMWARE_RESET;
+	else
+		return 0;
+}
+
+static ssize_t
+store_host_reset(struct device *dev, struct device_attribute *attr,
+		const char *buf, size_t count)
+{
+	struct Scsi_Host *shost = class_to_shost(dev);
+	struct scsi_host_template *sht = shost->hostt;
+	int ret = -EINVAL;
+	char str[10];
+	int type;
+
+	sscanf(buf, "%s", str);
+	type = check_reset_type(str);
+
+	if (!type)
+		goto exit_store_host_reset;
+
+	if (sht->host_reset)
+		ret = sht->host_reset(shost, type);
+
+exit_store_host_reset:
+	if (ret == 0)
+		ret = count;
+	return ret;
+}
+
+static DEVICE_ATTR(host_reset, S_IWUSR, NULL, store_host_reset);
+
 shost_rd_attr(unique_id, "%u\n");
 shost_rd_attr(host_busy, "%hu\n");
 shost_rd_attr(cmd_per_lun, "%hd\n");
@@ -272,6 +309,7 @@ static struct attribute *scsi_sysfs_shost_attrs[] = {
 	&dev_attr_active_mode.attr,
 	&dev_attr_prot_capabilities.attr,
 	&dev_attr_prot_guard_type.attr,
+	&dev_attr_host_reset.attr,
 	NULL
 };
 
diff --git a/include/scsi/scsi_host.h b/include/scsi/scsi_host.h
index f1f2644..fc22ad9 100644
--- a/include/scsi/scsi_host.h
+++ b/include/scsi/scsi_host.h
@@ -355,6 +355,19 @@ struct scsi_host_template {
 	 */
 	enum blk_eh_timer_return (*eh_timed_out)(struct scsi_cmnd *);
 
+	/* This is an optional routine that allows transport to initiate
+	 * LLD adapter or firmware reset using sysfs attribute.
+	 *
+	 * Return values: 0 on success, -ve value on failure.
+	 *
+	 * Status: OPTIONAL
+	 */
+
+	int (*host_reset)(struct Scsi_Host *shost, int reset_type);
+#define SCSI_ADAPTER_RESET	1
+#define SCSI_FIRMWARE_RESET	2
+
+
 	/*
 	 * Name of proc directory
 	 */
-- 
1.7.6

[PATCH 4/4] qla4xxx: Added support for adapter and firmware reset

[vikas.chaudhary]

From: Vikas Chaudhary <vikas.chaudhary@qlogic.com>

Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com>
---
 drivers/scsi/qla4xxx/ql4_def.h |    2 +
 drivers/scsi/qla4xxx/ql4_fw.h  |    3 +
 drivers/scsi/qla4xxx/ql4_isr.c |    2 +
 drivers/scsi/qla4xxx/ql4_os.c  |  107 ++++++++++++++++++++++++++++++++++++++++
 4 files changed, 114 insertions(+), 0 deletions(-)

diff --git a/drivers/scsi/qla4xxx/ql4_def.h b/drivers/scsi/qla4xxx/ql4_def.h
index c3190eb..d2f7cd6 100644
--- a/drivers/scsi/qla4xxx/ql4_def.h
+++ b/drivers/scsi/qla4xxx/ql4_def.h
@@ -172,6 +172,7 @@
 #define RELOGIN_TOV			18
 #define ISNS_DEREG_TOV			5
 #define HBA_ONLINE_TOV			30
+#define DISABLE_ACB_TOV			30
 
 #define MAX_RESET_HA_RETRIES		2
 
@@ -616,6 +617,7 @@ struct scsi_qla_host {
 	uint16_t phy_port_cnt;
 	uint16_t iscsi_pci_func_cnt;
 	uint8_t model_name[16];
+	struct completion disable_acb_comp;
 };
 
 struct ql4_task_data {
diff --git a/drivers/scsi/qla4xxx/ql4_fw.h b/drivers/scsi/qla4xxx/ql4_fw.h
index 581ff7e..0e24c7a 100644
--- a/drivers/scsi/qla4xxx/ql4_fw.h
+++ b/drivers/scsi/qla4xxx/ql4_fw.h
@@ -605,6 +605,9 @@ struct init_fw_ctrl_blk {
 /*	struct addr_ctrl_blk sec;*/
 };
 
+#define PRIMARI_ACB		0
+#define SECONDARY_ACB		1
+
 struct addr_ctrl_blk_def {
 	uint8_t reserved1[1];	/* 00 */
 	uint8_t control;	/* 01 */
diff --git a/drivers/scsi/qla4xxx/ql4_isr.c b/drivers/scsi/qla4xxx/ql4_isr.c
index ee1104a..827e930 100644
--- a/drivers/scsi/qla4xxx/ql4_isr.c
+++ b/drivers/scsi/qla4xxx/ql4_isr.c
@@ -619,6 +619,8 @@ static void qla4xxx_isr_decode_mailbox(struct scsi_qla_host * ha,
 			else if ((mbox_sts[3] == ACB_STATE_ACQUIRING) &&
 			    (mbox_sts[2] == ACB_STATE_VALID))
 				set_bit(DPC_RESET_HA, &ha->dpc_flags);
+			else if ((mbox_sts[3] == ACB_STATE_UNCONFIGURED))
+				complete(&ha->disable_acb_comp);
 			break;
 
 		case MBOX_ASTS_MAC_ADDRESS_CHANGED:
diff --git a/drivers/scsi/qla4xxx/ql4_os.c b/drivers/scsi/qla4xxx/ql4_os.c
index 489d7cd..456cd6f 100644
--- a/drivers/scsi/qla4xxx/ql4_os.c
+++ b/drivers/scsi/qla4xxx/ql4_os.c
@@ -121,6 +121,7 @@ static int qla4xxx_slave_alloc(struct scsi_device *device);
 static int qla4xxx_slave_configure(struct scsi_device *device);
 static void qla4xxx_slave_destroy(struct scsi_device *sdev);
 static mode_t ql4_attr_is_visible(int param_type, int param);
+static int qla4xxx_host_reset(struct Scsi_Host *shost, int reset_type);
 
 static struct qla4_8xxx_legacy_intr_set legacy_intr[] =
     QLA82XX_LEGACY_INTR_CONFIG;
@@ -148,6 +149,7 @@ static struct scsi_host_template qla4xxx_driver_template = {
 
 	.max_sectors		= 0xFFFF,
 	.shost_attrs		= qla4xxx_host_attrs,
+	.host_reset		= qla4xxx_host_reset,
 	.vendor_id		= SCSI_NL_VID_TYPE_PCI | PCI_VENDOR_ID_QLOGIC,
 };
 
@@ -3133,6 +3135,7 @@ static int __devinit qla4xxx_probe_adapter(struct pci_dev *pdev,
 
 	mutex_init(&ha->mbox_sem);
 	init_completion(&ha->mbx_intr_comp);
+	init_completion(&ha->disable_acb_comp);
 
 	spin_lock_init(&ha->hardware_lock);
 
@@ -3761,6 +3764,110 @@ static int qla4xxx_eh_host_reset(struct scsi_cmnd *cmd)
 	return return_status;
 }
 
+static int qla4xxx_context_reset(struct scsi_qla_host *ha)
+{
+	uint32_t mbox_cmd[MBOX_REG_COUNT];
+	uint32_t mbox_sts[MBOX_REG_COUNT];
+	struct addr_ctrl_blk_def *acb = NULL;
+	uint32_t acb_len = sizeof(struct addr_ctrl_blk_def);
+	int rval = QLA_SUCCESS;
+	dma_addr_t acb_dma;
+
+	acb = dma_alloc_coherent(&ha->pdev->dev,
+				 sizeof(struct addr_ctrl_blk_def),
+				 &acb_dma, GFP_KERNEL);
+	if (!acb) {
+		ql4_printk(KERN_ERR, ha, "%s: Unable to alloc acb\n",
+			   __func__);
+		rval = -ENOMEM;
+		goto exit_port_reset;
+	}
+
+	memset(acb, 0, acb_len);
+
+	rval = qla4xxx_get_acb(ha, acb_dma, PRIMARI_ACB, acb_len);
+	if (rval != QLA_SUCCESS) {
+		rval = -EIO;
+		goto exit_free_acb;
+	}
+
+	rval = qla4xxx_disable_acb(ha);
+	if (rval != QLA_SUCCESS) {
+		rval = -EIO;
+		goto exit_free_acb;
+	}
+
+	wait_for_completion_timeout(&ha->disable_acb_comp,
+				    DISABLE_ACB_TOV * HZ);
+
+	rval = qla4xxx_set_acb(ha, &mbox_cmd[0], &mbox_sts[0], acb_dma);
+	if (rval != QLA_SUCCESS) {
+		rval = -EIO;
+		goto exit_free_acb;
+	}
+
+exit_free_acb:
+	dma_free_coherent(&ha->pdev->dev, sizeof(struct addr_ctrl_blk_def),
+			  acb, acb_dma);
+exit_port_reset:
+	DEBUG2(ql4_printk(KERN_INFO, ha, "%s %s\n", __func__,
+			  rval == QLA_SUCCESS ? "SUCCEEDED" : "FAILED"));
+	return rval;
+}
+
+static int qla4xxx_host_reset(struct Scsi_Host *shost, int reset_type)
+{
+	struct scsi_qla_host *ha = to_qla_host(shost);
+	int rval = QLA_SUCCESS;
+
+	if (ql4xdontresethba) {
+		DEBUG2(ql4_printk(KERN_INFO, ha, "%s: Don't Reset HBA\n",
+				  __func__));
+		rval = -EPERM;
+		goto exit_host_reset;
+	}
+
+	rval = qla4xxx_wait_for_hba_online(ha);
+	if (rval != QLA_SUCCESS) {
+		DEBUG2(ql4_printk(KERN_INFO, ha, "%s: Unable to reset host "
+				  "adapter\n", __func__));
+		rval = -EIO;
+		goto exit_host_reset;
+	}
+
+	if (test_bit(DPC_RESET_HA, &ha->dpc_flags))
+		goto recover_adapter;
+
+	switch (reset_type) {
+	case SCSI_ADAPTER_RESET:
+		set_bit(DPC_RESET_HA, &ha->dpc_flags);
+		break;
+	case SCSI_FIRMWARE_RESET:
+		if (!test_bit(DPC_RESET_HA, &ha->dpc_flags)) {
+			if (is_qla8022(ha))
+				/* set firmware context reset */
+				set_bit(DPC_RESET_HA_FW_CONTEXT,
+					&ha->dpc_flags);
+			else {
+				rval = qla4xxx_context_reset(ha);
+				goto exit_host_reset;
+			}
+		}
+		break;
+	}
+
+recover_adapter:
+	rval = qla4xxx_recover_adapter(ha);
+	if (rval != QLA_SUCCESS) {
+		DEBUG2(ql4_printk(KERN_INFO, ha, "%s: recover adapter fail\n",
+				  __func__));
+		rval = -EIO;
+	}
+
+exit_host_reset:
+	return rval;
+}
+
 /* PCI AER driver recovers from all correctable errors w/o
  * driver intervention. For uncorrectable errors PCI AER
  * driver calls the following device driver's callbacks
-- 
1.7.6

Re: [PATCH 0/4] qla4xxx feature updates

[Mike Christie]

On 08/12/2011 04:51 AM, vikas.chaudhary@qlogic.com wrote:
> From: Vikas Chaudhary <vikas.chaudhary@qlogic.com> 
> 
> James,
> 
> Following patches are made over scsi-misc and our ealier patchset
> posted here: http://marc.info/?l=linux-scsi&m=131219494805315&w=2
> 
> Harish Zunjarrao (2):
> 	qla4xxx: Added restore factory defaults support using BSG
> 	qla4xxx: Added Get ACB support using BSG
> 
> Vikas Chaudhary (2):
> 	scsi: Added support for adapter and firmware reset
> 	qla4xxx: Added support for adapter and firmware reset
> 

Patches look ok.

Reviewed-by: Mike Christie <michaelc@cs.wisc.edu>