From: Hannes Reinecke <hare@suse.de>
To: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Mike Snitzer <snitzer@redhat.com>,
Jun'ichi Nomura <j-nomura@ce.jp.nec.com>,
James Bottomley <James.Bottomley@HansenPartnership.com>,
Steffen Maier <maier@linux.vnet.ibm.com>,
"linux-scsi@vger.kernel.org" <linux-scsi@vger.kernel.org>,
Jens Axboe <axboe@kernel.dk>,
Linux Kernel <linux-kernel@vger.kernel.org>,
Alan Stern <stern@rowland.harvard.edu>,
Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com>,
"Taraka R. Bodireddy" <tarak.reddy@in.ibm.com>,
"Seshagiri N. Ippili" <seshagiri.ippili@in.ibm.com>,
"Manvanthara B. Puttashankar" <mputtash@in.ibm.com>,
Jeff Moyer <jmoyer@redhat.com>, Shaohua Li <shaohua.li@intel.com>,
gmuelas@de.ibm.com
Subject: Re: [GIT PULL] Queue free fix (was Re: [PATCH] block: Free queue resources at blk_release_queue())
Date: Wed, 09 Nov 2011 10:37:06 +0100 [thread overview]
Message-ID: <4EBA49C2.1000704@suse.de> (raw)
In-Reply-To: <20111104091936.GB2397@osiris.boeblingen.de.ibm.com>
On 11/04/2011 10:19 AM, Heiko Carstens wrote:
> On Thu, Nov 03, 2011 at 02:25:48PM -0400, Mike Snitzer wrote:
>> On Mon, Oct 31 2011 at 9:00am -0400,
>> Heiko Carstens<heiko.carstens@de.ibm.com> wrote:
>>
>>> On Mon, Oct 31, 2011 at 08:46:06PM +0900, Jun'ichi Nomura wrote:
>>>> Hm, dm_softirq_done is generic completion code of original
>>>> request in dm-multipath.
>>>> So oops here might be another manifestation of use-after-free.
>>>>
>>>> Do you always hit the oops at the same address?
>>>
>>> I think we saw this bug the first time. But before that the scsi
>>> logging level was higher. Gonzalo is trying to recreate it with
>>> the same (old) scsi logging level.
>>> Afterwards we will try with barrier=0.
>>>
>>> Both on v3.0.7 btw.
>>>
>>>> Could you find corresponding source code line for
>>>> the crashed address, dm_softirq_done+0x72/0x140,
>>>> and which pointer was invalid?
>>>
>>> It crashes in the inlined function dm_done() when trying to
>>> dereference tio (aka clone->end_io_data):
>>>
>>> static void dm_done(struct request *clone, int error, bool mapped)
>>> {
>>> int r = error;
>>> struct dm_rq_target_io *tio = clone->end_io_data;
>>> dm_request_endio_fn rq_end_io = tio->ti->type->rq_end_io;
>>
>> Hi,
>>
>> Which underlying storage driver is being used by this multipath device?
>
> It's the s390 only zfcp device driver.
>
> FWIW, yet another use-after-free crash, this time however in multipath_end_io:
>
> [96875.870593] Unable to handle kernel pointer dereference at virtual kernel address 6b6b6b6b6b6b6000
> [96875.870602] Oops: 0038 [#1]
> [96875.870674] PREEMPT SMP DEBUG_PAGEALLOC
> [96875.870683] Modules linked in: dm_round_robin sunrpc ipv6 qeth_l2 binfmt_misc dm_multipath scsi_dh dm_mod qeth ccwgroup [la\
> st unloaded: scsi_wait_scan]
> [96875.870722] CPU: 2 Tainted: G W 3.0.7-50.x.20111024-s390xdefault #1
> [96875.870728] Process udevd (pid: 36697, task: 0000000072c8a3a8, ksp: 0000000057c43868)
> [96875.870732] Krnl PSW : 0704200180000000 000003e001347138 (multipath_end_io+0x50/0x140 [dm_multipath])
> [96875.870746] R:0 T:1 IO:1 EX:1 Key:0 M:1 W:0 P:0 AS:0 CC:2 PM:0 EA:3
> [96875.870751] Krnl GPRS: 0000000000000000 000003e000000000 6b6b6b6b6b6b6b6b 00000000717ab940
> [96875.870755] 0000000000000000 00000000717abab0 0000000000000002 0700000000000008
> [96875.870759] 0000000000000002 0000000000000000 0000000058dd37a8 000000006f845478
> [96875.870764] 000003e0012e1000 000000005613d1f0 000000007a737bf0 000000007a737ba0
> [96875.870768] Krnl Code: 000003e00134712a: b90200dd ltgr %r13,%r13
> [96875.870793] 000003e00134712e: a7840017 brc 8,3e00134715c
> [96875.870800] 000003e001347132: e320d0100004 lg %r2,16(%r13)
> [96875.870809]>000003e001347138: e31020180004 lg %r1,24(%r2)
> [96875.870818] 000003e00134713e: e31010580004 lg %r1,88(%r1)
> [96875.870827] 000003e001347144: b9020011 ltgr %r1,%r1
> [96875.870835] 000003e001347148: a784000a brc 8,3e00134715c
> [96875.870841] 000003e00134714c: 41202018 la %r2,24(%r2)
> [96875.870889] Call Trace:
> [96875.870892] ([<0700000000000008>] 0x700000000000008)
> [96875.870897] [<000003e0012e3662>] dm_softirq_done+0x9a/0x140 [dm_mod]
> [96875.870915] [<000000000040d29c>] blk_done_softirq+0xd4/0xf0
> [96875.870925] [<00000000001587c2>] __do_softirq+0xda/0x398
> [96875.870932] [<000000000010f47e>] do_softirq+0xe2/0xe8
> [96875.870940] [<0000000000158e2c>] irq_exit+0xc8/0xcc
> [96875.870945] [<00000000004ceb48>] do_IRQ+0x910/0x1bfc
> [96875.870953] [<000000000061a164>] io_return+0x0/0x16
> [96875.870961] [<000000000019c84e>] lock_acquire+0xd2/0x204
> [96875.870969] ([<000000000019c836>] lock_acquire+0xba/0x204)
> [96875.870974] [<0000000000615f8e>] mutex_lock_killable_nested+0x92/0x520
> [96875.870983] [<0000000000292796>] vfs_readdir+0x8a/0xe4
> [96875.870992] [<00000000002928e0>] SyS_getdents+0x60/0xe8
> [96875.870999] [<0000000000619af2>] sysc_noemu+0x16/0x1c
> [96875.871024] [<000003fffd1ec83e>] 0x3fffd1ec83e
> [96875.871028] INFO: lockdep is turned off.
> [96875.871031] Last Breaking-Event-Address:
> [96875.871037] [<000003e0012e3660>] dm_softirq_done+0x98/0x140 [dm_mod]
>
> static int multipath_end_io(struct dm_target *ti, struct request *clone,
> int error, union map_info *map_context)
> {
> struct multipath *m = ti->private;
> struct dm_mpath_io *mpio = map_context->ptr;
> struct pgpath *pgpath = mpio->pgpath;
> struct path_selector *ps;
> int r;
>
> r = do_end_io(m, clone, error, mpio);
> if (pgpath) {
> ps =&pgpath->pg->ps;<--- crashes here
> if (ps->type->end_io)
> ps->type->end_io(ps,&pgpath->path, mpio->nr_bytes);
> }
> mempool_free(mpio, m->mpio_pool);
>
> return r;
> }
>
> It crashes when trying to derefence pgpath, which was freed. Since we have
> SLUB debugging turned on the freed object tells us that it was allocated
> via a call to multipath_ctr() and freed via a call to free_priority_group().
>
> FWIW, this reproduction was done with barriers off.
>
> Btw, since I cc'ed you rather late I'm not sure if you are aware of the
> test scenario: it's I/O stress with multipathing were paths come and go
> all the time. It usually takes quite a few hours before the crashes are
> observed.
Hmm. Just to be on the safe side, could you try this one:
diff --git a/drivers/md/dm-mpath.c b/drivers/md/dm-mpath.c
index 5e0090e..e6fad46 100644
--- a/drivers/md/dm-mpath.c
+++ b/drivers/md/dm-mpath.c
@@ -920,8 +920,10 @@ static int multipath_map(struct dm_target *ti,
struct reque
st *clone,
map_context->ptr = mpio;
clone->cmd_flags |= REQ_FAILFAST_TRANSPORT;
r = map_io(m, clone, mpio, 0);
- if (r < 0 || r == DM_MAPIO_REQUEUE)
+ if (r < 0 || r == DM_MAPIO_REQUEUE) {
mempool_free(mpio, m->mpio_pool);
+ map_context->ptr = NULL;
+ }
return r;
}
Cheers,
Hannes
--
Dr. Hannes Reinecke zSeries & Storage
hare@suse.de +49 911 74053 688
SUSE LINUX Products GmbH, Maxfeldstr. 5, 90409 Nürnberg
GF: J. Hawn, J. Guild, F. Imendörffer, HRB 16746 (AG Nürnberg)
next prev parent reply other threads:[~2011-11-09 9:37 UTC|newest]
Thread overview: 61+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-09-22 13:18 [PATCH] block: Free queue resources at blk_release_queue() Hannes Reinecke
2011-09-28 0:47 ` Jens Axboe
2011-09-28 0:55 ` Linus Torvalds
2011-09-28 1:15 ` Jens Axboe
2011-09-28 1:59 ` Linus Torvalds
2011-09-28 2:02 ` Jens Axboe
2011-09-28 4:10 ` James Bottomley
2011-09-28 14:08 ` Jens Axboe
2011-09-28 14:11 ` James Bottomley
2011-09-28 14:14 ` [GIT PULL] Queue free fix (was Re: [PATCH] block: Free queue resources at blk_release_queue()) Jens Axboe
2011-09-28 15:22 ` Linus Torvalds
2011-09-28 15:43 ` James Bottomley
2011-09-28 17:48 ` Vivek Goyal
2011-09-28 17:53 ` Christoph Hellwig
2011-09-28 18:09 ` Vivek Goyal
2011-09-28 18:16 ` Christoph Hellwig
2011-09-28 19:05 ` Eric Seppanen
2011-09-28 19:14 ` Christoph Hellwig
2011-11-30 10:18 ` Jens Axboe
2011-11-30 10:26 ` Christoph Hellwig
2011-09-28 22:34 ` Vivek Goyal
2011-09-28 17:59 ` James Bottomley
2011-10-13 13:09 ` Steffen Maier
2011-10-14 16:03 ` James Bottomley
2011-10-17 8:46 ` Jun'ichi Nomura
2011-10-17 14:06 ` James Bottomley
2011-10-18 13:31 ` Jun'ichi Nomura
2011-10-18 15:45 ` Heiko Carstens
2011-10-18 16:29 ` James Bottomley
2011-10-31 10:05 ` Heiko Carstens
2011-10-31 10:42 ` James Bottomley
2011-10-31 11:46 ` Jun'ichi Nomura
2011-10-31 13:00 ` Heiko Carstens
2011-11-02 12:37 ` Jun'ichi Nomura
2011-11-02 12:44 ` Hannes Reinecke
2011-11-02 13:47 ` Heiko Carstens
2011-11-04 4:07 ` Jun'ichi Nomura
2011-11-04 9:12 ` Heiko Carstens
2011-11-03 18:25 ` Mike Snitzer
2011-11-04 9:19 ` Heiko Carstens
2011-11-04 13:30 ` Mike Snitzer
2011-11-04 13:37 ` Hannes Reinecke
2011-11-07 11:31 ` Jun'ichi Nomura
2011-11-07 13:42 ` Mike Snitzer
2011-11-07 12:23 ` Heiko Carstens
2011-11-07 11:30 ` Jun'ichi Nomura
2011-11-07 15:36 ` Mike Snitzer
2011-11-07 16:43 ` Heiko Carstens
2011-11-07 17:10 ` Mike Snitzer
2011-11-07 21:44 ` Mike Snitzer
2011-11-09 9:37 ` Hannes Reinecke [this message]
2011-11-10 16:10 ` Heiko Carstens
2011-11-17 16:29 ` Mike Snitzer
2011-11-29 12:00 ` Heiko Carstens
2011-11-29 20:18 ` Mike Snitzer
2011-11-30 7:25 ` Hannes Reinecke
2011-12-12 12:39 ` Heiko Carstens
2011-12-13 16:50 ` Mike Snitzer
2011-10-31 13:21 ` Mike Snitzer
2011-10-31 13:40 ` Heiko Carstens
2011-10-31 14:01 ` Mike Snitzer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4EBA49C2.1000704@suse.de \
--to=hare@suse.de \
--cc=James.Bottomley@HansenPartnership.com \
--cc=axboe@kernel.dk \
--cc=cascardo@linux.vnet.ibm.com \
--cc=gmuelas@de.ibm.com \
--cc=heiko.carstens@de.ibm.com \
--cc=j-nomura@ce.jp.nec.com \
--cc=jmoyer@redhat.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-scsi@vger.kernel.org \
--cc=maier@linux.vnet.ibm.com \
--cc=mputtash@in.ibm.com \
--cc=seshagiri.ippili@in.ibm.com \
--cc=shaohua.li@intel.com \
--cc=snitzer@redhat.com \
--cc=stern@rowland.harvard.edu \
--cc=tarak.reddy@in.ibm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).