[PATCH 0/4 v8] Fixes for SCSI device removal

[PATCH 0/4 v8] Fixes for SCSI device removal

[Bart Van Assche]

This is version eight of the SCSI device removal patch series. This
version of this patch series has been tested by triggering a large
number of removals of a SCSI device controlled by the ib_srp LLD and at
the same time running an I/O integrity test with fio on a dm device on
top of the SRP SCSI device.

Changes compared to v7:
- Made sure that __scsi_queue_insert() processes the request that has
  been passed to that function. Added a comment in that function too.
- Fixed a typo in the description of the first patch in this series
  and removed "CC: stable".

Changes compared to v6:
- Added a fix for a race in the block layer.
- Moved a BUG_ON(!sdev) statement up since it's a precondition check.
- Changed return type of scsi_queue_insert() from int to void.
- Added a cancel_work_sync(&sdev->requeue_work) call in
  __scsi_remove_device().

Changes compared to v5:
- Removed the function scsi_free_queue() and inlined that function
  in its callers.
- Added two additional patches.

[PATCH 1/4] block: Fix race on request.end_io invocations

[Bart Van Assche]

Some request.end_io implementations can be called safely without
the queue lock held while several other implementations assume
that the queue lock is held. So let's play it safe and make sure
that the queue lock is held around all end_io invocations. Found
this through source code review.

Note: blk_finish_request() already invokes request.end_io with
the queue lock held.

Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Cc: Jens Axboe <axboe@kernel.dk>
Acked-by: Tejun Heo <tj@kernel.org>
---
 block/blk-exec.c |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)

diff --git a/block/blk-exec.c b/block/blk-exec.c
index fb2cbd5..6724fab 100644
--- a/block/blk-exec.c
+++ b/block/blk-exec.c
@@ -54,10 +54,10 @@ void blk_execute_rq_nowait(struct request_queue *q, struct gendisk *bd_disk,
 	spin_lock_irq(q->queue_lock);
 
 	if (unlikely(blk_queue_dead(q))) {
-		spin_unlock_irq(q->queue_lock);
 		rq->errors = -ENXIO;
 		if (rq->end_io)
 			rq->end_io(rq, rq->errors);
+		spin_unlock_irq(q->queue_lock);
 		return;
 	}
 
-- 
1.7.7

[PATCH 2/4] scsi: Fix device removal NULL pointer dereference

[Bart Van Assche]

Since scsi_prep_fn() may be invoked concurrently with
__scsi_remove_device(), keep the queuedata pointer in
__scsi_remove_device(). This patch fixes a kernel oops that
can be triggered by USB device removal. See also
http://www.spinics.net/lists/linux-scsi/msg56254.html.

Reported-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Cc: James Bottomley <JBottomley@parallels.com>
Cc: Mike Christie <michaelc@cs.wisc.edu>
Cc: Stefan Richter <stefanr@s5r6.in-berlin.de>
Cc: <stable@kernel.org>
---
 drivers/scsi/hosts.c      |    8 +++++++-
 drivers/scsi/scsi_lib.c   |   35 ++++++++---------------------------
 drivers/scsi/scsi_priv.h  |    1 -
 drivers/scsi/scsi_sysfs.c |    5 +----
 4 files changed, 16 insertions(+), 33 deletions(-)

diff --git a/drivers/scsi/hosts.c b/drivers/scsi/hosts.c
index a3a056a..6b9d89a 100644
--- a/drivers/scsi/hosts.c
+++ b/drivers/scsi/hosts.c
@@ -299,9 +299,15 @@ static void scsi_host_dev_release(struct device *dev)
 		destroy_workqueue(shost->work_q);
 	q = shost->uspace_req_q;
 	if (q) {
+		/*
+		 * Note: freeing queuedata before invoking blk_cleanup_queue()
+		 * is safe here because no request function is associated with
+		 * uspace_req_q. See also the __scsi_alloc_queue() call in
+		 * drivers/scsi/scsi_tgt_lib.c.
+		 */
 		kfree(q->queuedata);
 		q->queuedata = NULL;
-		scsi_free_queue(q);
+		blk_cleanup_queue(q);
 	}
 
 	scsi_destroy_command_freelist(shost);
diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c
index 6dfb978..c26ef49 100644
--- a/drivers/scsi/scsi_lib.c
+++ b/drivers/scsi/scsi_lib.c
@@ -406,10 +406,7 @@ static void scsi_run_queue(struct request_queue *q)
 	LIST_HEAD(starved_list);
 	unsigned long flags;
 
-	/* if the device is dead, sdev will be NULL, so no queue to run */
-	if (!sdev)
-		return;
-
+	BUG_ON(!sdev);
 	shost = sdev->host;
 	if (scsi_target(sdev)->single_lun)
 		scsi_single_lun_run(sdev);
@@ -1370,16 +1367,18 @@ static inline int scsi_host_queue_ready(struct request_queue *q,
  * may be changed after request stacking drivers call the function,
  * regardless of taking lock or not.
  *
- * When scsi can't dispatch I/Os anymore and needs to kill I/Os
- * (e.g. !sdev), scsi needs to return 'not busy'.
- * Otherwise, request stacking drivers may hold requests forever.
+ * When scsi can't dispatch I/Os anymore and needs to kill I/Os scsi
+ * needs to return 'not busy'. Otherwise, request stacking drivers
+ * may hold requests forever.
  */
 static int scsi_lld_busy(struct request_queue *q)
 {
 	struct scsi_device *sdev = q->queuedata;
 	struct Scsi_Host *shost;
 
-	if (!sdev)
+	BUG_ON(!sdev);
+
+	if (blk_queue_dead(q))
 		return 0;
 
 	shost = sdev->host;
@@ -1490,11 +1489,7 @@ static void scsi_request_fn(struct request_queue *q)
 	struct scsi_cmnd *cmd;
 	struct request *req;
 
-	if (!sdev) {
-		while ((req = blk_peek_request(q)) != NULL)
-			scsi_kill_request(req, q);
-		return;
-	}
+	BUG_ON(!sdev);
 
 	if(!get_device(&sdev->sdev_gendev))
 		/* We must be tearing the block queue down already */
@@ -1697,20 +1692,6 @@ struct request_queue *scsi_alloc_queue(struct scsi_device *sdev)
 	return q;
 }
 
-void scsi_free_queue(struct request_queue *q)
-{
-	unsigned long flags;
-
-	WARN_ON(q->queuedata);
-
-	/* cause scsi_request_fn() to kill all non-finished requests */
-	spin_lock_irqsave(q->queue_lock, flags);
-	q->request_fn(q);
-	spin_unlock_irqrestore(q->queue_lock, flags);
-
-	blk_cleanup_queue(q);
-}
-
 /*
  * Function:    scsi_block_requests()
  *
diff --git a/drivers/scsi/scsi_priv.h b/drivers/scsi/scsi_priv.h
index 07ce3f5..2b8d8b5 100644
--- a/drivers/scsi/scsi_priv.h
+++ b/drivers/scsi/scsi_priv.h
@@ -84,7 +84,6 @@ extern void scsi_next_command(struct scsi_cmnd *cmd);
 extern void scsi_io_completion(struct scsi_cmnd *, unsigned int);
 extern void scsi_run_host_queues(struct Scsi_Host *shost);
 extern struct request_queue *scsi_alloc_queue(struct scsi_device *sdev);
-extern void scsi_free_queue(struct request_queue *q);
 extern int scsi_init_queue(void);
 extern void scsi_exit_queue(void);
 struct request_queue;
diff --git a/drivers/scsi/scsi_sysfs.c b/drivers/scsi/scsi_sysfs.c
index 04c2a27..42c35ff 100644
--- a/drivers/scsi/scsi_sysfs.c
+++ b/drivers/scsi/scsi_sysfs.c
@@ -971,11 +971,8 @@ void __scsi_remove_device(struct scsi_device *sdev)
 		sdev->host->hostt->slave_destroy(sdev);
 	transport_destroy_device(dev);
 
-	/* cause the request function to reject all I/O requests */
-	sdev->request_queue->queuedata = NULL;
-
 	/* Freeing the queue signals to block that we're done */
-	scsi_free_queue(sdev->request_queue);
+	blk_cleanup_queue(sdev->request_queue);
 	put_device(dev);
 }
 
-- 
1.7.7

[PATCH 3/4] scsi: Change return type of scsi_queue_insert() into void

[Bart Van Assche]

The return value of scsi_queue_insert() is ignored by all its
callers, hence change the return type of this function into
void.

Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Cc: James Bottomley <JBottomley@parallels.com>
Cc: Mike Christie <michaelc@cs.wisc.edu>
Cc: <stable@kernel.org>
---
 drivers/scsi/scsi_lib.c  |    8 +++-----
 drivers/scsi/scsi_priv.h |    2 +-
 2 files changed, 4 insertions(+), 6 deletions(-)

diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c
index c26ef49..082c1e5 100644
--- a/drivers/scsi/scsi_lib.c
+++ b/drivers/scsi/scsi_lib.c
@@ -109,7 +109,7 @@ static void scsi_unprep_request(struct request *req)
  * for a requeue after completion, which should only occur in this
  * file.
  */
-static int __scsi_queue_insert(struct scsi_cmnd *cmd, int reason, int unbusy)
+static void __scsi_queue_insert(struct scsi_cmnd *cmd, int reason, int unbusy)
 {
 	struct Scsi_Host *host = cmd->device->host;
 	struct scsi_device *device = cmd->device;
@@ -162,8 +162,6 @@ static int __scsi_queue_insert(struct scsi_cmnd *cmd, int reason, int unbusy)
 	spin_unlock_irqrestore(q->queue_lock, flags);
 
 	kblockd_schedule_work(q, &device->requeue_work);
-
-	return 0;
 }
 
 /*
@@ -185,9 +183,9 @@ static int __scsi_queue_insert(struct scsi_cmnd *cmd, int reason, int unbusy)
  * Notes:       This could be called either from an interrupt context or a
  *              normal process context.
  */
-int scsi_queue_insert(struct scsi_cmnd *cmd, int reason)
+void scsi_queue_insert(struct scsi_cmnd *cmd, int reason)
 {
-	return __scsi_queue_insert(cmd, reason, 1);
+	__scsi_queue_insert(cmd, reason, 1);
 }
 /**
  * scsi_execute - insert request and wait for the result
diff --git a/drivers/scsi/scsi_priv.h b/drivers/scsi/scsi_priv.h
index 2b8d8b5..cacb0e7 100644
--- a/drivers/scsi/scsi_priv.h
+++ b/drivers/scsi/scsi_priv.h
@@ -79,7 +79,7 @@ int scsi_noretry_cmd(struct scsi_cmnd *scmd);
 /* scsi_lib.c */
 extern int scsi_maybe_unblock_host(struct scsi_device *sdev);
 extern void scsi_device_unbusy(struct scsi_device *sdev);
-extern int scsi_queue_insert(struct scsi_cmnd *cmd, int reason);
+extern void scsi_queue_insert(struct scsi_cmnd *cmd, int reason);
 extern void scsi_next_command(struct scsi_cmnd *cmd);
 extern void scsi_io_completion(struct scsi_cmnd *, unsigned int);
 extern void scsi_run_host_queues(struct Scsi_Host *shost);

[PATCH 4/4] scsi: Stop accepting SCSI requests before removing a device

[Bart Van Assche]

Avoid that the code for requeueing SCSI requests triggers a
crash by making sure that that code isn't scheduled anymore
after a device has been removed.

Also, source code inspection of __scsi_remove_device() revealed
a race condition in this function: no new SCSI requests must be
accepted for a SCSI device after device removal started.

Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Cc: Mike Christie <michaelc@cs.wisc.edu>
Cc: James Bottomley <JBottomley@parallels.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Joe Lawrence <jdl1291@gmail.com>
Cc: Jun'ichi Nomura <j-nomura@ce.jp.nec.com>
Cc: <stable@kernel.org>
---
 drivers/scsi/scsi_lib.c   |    7 ++++---
 drivers/scsi/scsi_sysfs.c |   11 +++++++++--
 2 files changed, 13 insertions(+), 5 deletions(-)

diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c
index 082c1e5..fc2b9f4 100644
--- a/drivers/scsi/scsi_lib.c
+++ b/drivers/scsi/scsi_lib.c
@@ -155,13 +155,14 @@ static void __scsi_queue_insert(struct scsi_cmnd *cmd, int reason, int unbusy)
 
 	/*
 	 * Requeue this command.  It will go before all other commands
-	 * that are already in the queue.
+	 * that are already in the queue. Schedule requeue work under
+	 * lock such that the kblockd_schedule_work() call happens
+	 * before blk_cleanup_queue() finishes.
 	 */
 	spin_lock_irqsave(q->queue_lock, flags);
 	blk_requeue_request(q, cmd->request);
-	spin_unlock_irqrestore(q->queue_lock, flags);
-
 	kblockd_schedule_work(q, &device->requeue_work);
+	spin_unlock_irqrestore(q->queue_lock, flags);
 }
 
 /*
diff --git a/drivers/scsi/scsi_sysfs.c b/drivers/scsi/scsi_sysfs.c
index 42c35ff..efffc92 100644
--- a/drivers/scsi/scsi_sysfs.c
+++ b/drivers/scsi/scsi_sysfs.c
@@ -966,13 +966,20 @@ void __scsi_remove_device(struct scsi_device *sdev)
 		device_del(dev);
 	} else
 		put_device(&sdev->sdev_dev);
+
+	/*
+	 * Stop accepting new requests and wait until all queuecommand() and
+	 * scsi_run_queue() invocations have finished before tearing down the
+	 * device.
+	 */
 	scsi_device_set_state(sdev, SDEV_DEL);
+	blk_cleanup_queue(sdev->request_queue);
+	cancel_work_sync(&sdev->requeue_work);
+
 	if (sdev->host->hostt->slave_destroy)
 		sdev->host->hostt->slave_destroy(sdev);
 	transport_destroy_device(dev);
 
-	/* Freeing the queue signals to block that we're done */
-	blk_cleanup_queue(sdev->request_queue);
 	put_device(dev);
 }
 

Re: [PATCH 0/4 v8] Fixes for SCSI device removal

[Mike Christie]

On 06/07/2012 01:39 PM, Bart Van Assche wrote:
> This is version eight of the SCSI device removal patch series. This
> version of this patch series has been tested by triggering a large
> number of removals of a SCSI device controlled by the ib_srp LLD and at
> the same time running an I/O integrity test with fio on a dm device on
> top of the SRP SCSI device.
> 

Patches look ok to me.

Reviewed-by: Mike Christie <michaelc@cs.wisc.edu>

I also tested them in a distro kernel and they fix a oops we were seeing
there.

[PATCH 0/4 v9] SCSI device removal fixes

[Bart Van Assche]

This is version nine of the SCSI device removal patch series. This
patch series has been tested by triggering a large number of removals of
a SCSI device controlled by the ib_srp LLD and at the same time running
an I/O integrity test with fio on a dm device on top of the SRP SCSI device.

Changes compared to v8:
- Replaced the block layer patch (1/4) by a more comprehensive patch
  from Muthukumar Ratty.
- Added "Reviewed-by: Mike Christie" in patches 2/4..4/4.

Changes compared to v7:
- Made sure that __scsi_queue_insert() processes the request that has
  been passed to that function. Added a comment in that function too.
- Fixed a typo in the description of the first patch in this series
  and removed "CC: stable".

Changes compared to v6:
- Added a fix for a race in the block layer.
- Moved a BUG_ON(!sdev) statement up since it's a precondition check.
- Changed return type of scsi_queue_insert() from int to void.
- Added a cancel_work_sync(&sdev->requeue_work) call in
  __scsi_remove_device().

Changes compared to v5:
- Removed the function scsi_free_queue() and inlined that function
  in its callers.
- Added two additional patches.

[PATCH 4/4] scsi: Stop accepting SCSI requests before removing a device

[Bart Van Assche]

Avoid that the code for requeueing SCSI requests triggers a
crash by making sure that that code isn't scheduled anymore
after a device has been removed.

Also, source code inspection of __scsi_remove_device() revealed
a race condition in this function: no new SCSI requests must be
accepted for a SCSI device after device removal started.

Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Mike Christie <michaelc@cs.wisc.edu>
Cc: James Bottomley <JBottomley@parallels.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Joe Lawrence <jdl1291@gmail.com>
Cc: Jun'ichi Nomura <j-nomura@ce.jp.nec.com>
Cc: <stable@kernel.org>
---
 drivers/scsi/scsi_lib.c   |    7 ++++---
 drivers/scsi/scsi_sysfs.c |   11 +++++++++--
 2 files changed, 13 insertions(+), 5 deletions(-)

diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c
index 082c1e5..fc2b9f4 100644
--- a/drivers/scsi/scsi_lib.c
+++ b/drivers/scsi/scsi_lib.c
@@ -155,13 +155,14 @@ static void __scsi_queue_insert(struct scsi_cmnd *cmd, int reason, int unbusy)
 
 	/*
 	 * Requeue this command.  It will go before all other commands
-	 * that are already in the queue.
+	 * that are already in the queue. Schedule requeue work under
+	 * lock such that the kblockd_schedule_work() call happens
+	 * before blk_cleanup_queue() finishes.
 	 */
 	spin_lock_irqsave(q->queue_lock, flags);
 	blk_requeue_request(q, cmd->request);
-	spin_unlock_irqrestore(q->queue_lock, flags);
-
 	kblockd_schedule_work(q, &device->requeue_work);
+	spin_unlock_irqrestore(q->queue_lock, flags);
 }
 
 /*
diff --git a/drivers/scsi/scsi_sysfs.c b/drivers/scsi/scsi_sysfs.c
index 42c35ff..efffc92 100644
--- a/drivers/scsi/scsi_sysfs.c
+++ b/drivers/scsi/scsi_sysfs.c
@@ -966,13 +966,20 @@ void __scsi_remove_device(struct scsi_device *sdev)
 		device_del(dev);
 	} else
 		put_device(&sdev->sdev_dev);
+
+	/*
+	 * Stop accepting new requests and wait until all queuecommand() and
+	 * scsi_run_queue() invocations have finished before tearing down the
+	 * device.
+	 */
 	scsi_device_set_state(sdev, SDEV_DEL);
+	blk_cleanup_queue(sdev->request_queue);
+	cancel_work_sync(&sdev->requeue_work);
+
 	if (sdev->host->hostt->slave_destroy)
 		sdev->host->hostt->slave_destroy(sdev);
 	transport_destroy_device(dev);
 
-	/* Freeing the queue signals to block that we're done */
-	blk_cleanup_queue(sdev->request_queue);
 	put_device(dev);
 }
 

Re: [PATCH 4/4] scsi: Stop accepting SCSI requests before removing a device

[Tejun Heo]

On Mon, Jun 25, 2012 at 06:17:18PM +0000, Bart Van Assche wrote:
> Avoid that the code for requeueing SCSI requests triggers a
> crash by making sure that that code isn't scheduled anymore
> after a device has been removed.
> 
> Also, source code inspection of __scsi_remove_device() revealed
> a race condition in this function: no new SCSI requests must be
> accepted for a SCSI device after device removal started.
> 
> Signed-off-by: Bart Van Assche <bvanassche@acm.org>
> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu>
> Cc: James Bottomley <JBottomley@parallels.com>
> Cc: Jens Axboe <axboe@kernel.dk>
> Cc: Joe Lawrence <jdl1291@gmail.com>
> Cc: Jun'ichi Nomura <j-nomura@ce.jp.nec.com>
> Cc: <stable@kernel.org>
> ---
>  drivers/scsi/scsi_lib.c   |    7 ++++---
>  drivers/scsi/scsi_sysfs.c |   11 +++++++++--
>  2 files changed, 13 insertions(+), 5 deletions(-)
> 
> diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c
> index 082c1e5..fc2b9f4 100644
> --- a/drivers/scsi/scsi_lib.c
> +++ b/drivers/scsi/scsi_lib.c
> @@ -155,13 +155,14 @@ static void __scsi_queue_insert(struct scsi_cmnd *cmd, int reason, int unbusy)
>  
>  	/*
>  	 * Requeue this command.  It will go before all other commands
> -	 * that are already in the queue.
> +	 * that are already in the queue. Schedule requeue work under
> +	 * lock such that the kblockd_schedule_work() call happens
> +	 * before blk_cleanup_queue() finishes.
>  	 */
>  	spin_lock_irqsave(q->queue_lock, flags);
>  	blk_requeue_request(q, cmd->request);
> -	spin_unlock_irqrestore(q->queue_lock, flags);
> -
>  	kblockd_schedule_work(q, &device->requeue_work);
> +	spin_unlock_irqrestore(q->queue_lock, flags);

This is rather subtle but yeah it would achieve proper
synchronization.  Can't think of a better way ATM.

Aside from the nits, for all patches in this series

 Acked-by: Tejun Heo <tj@kernel.org>

Thanks!

-- 
tejun

[PATCH 0/4 v7] Fixes for SCSI device removal

[Bart Van Assche]

This is version seven of the SCSI device removal patch series. This
version of this patch series has been tested in the same way as the
previous series: by triggering a large number of removals of a SCSI
device controlled by the ib_srp LLD and also by checking that dm devices
controlled by multipathd still work fine.

Changes compared to v6:
- Added a fix for a race in the block layer.
- Moved a BUG_ON(!sdev) statement up since it's a precondition check.
- Changed return type of scsi_queue_insert() from int to void.
- Added a cancel_work_sync(&sdev->requeue_work) call in
  __scsi_remove_device().

Changes compared to v5:
- Removed the function scsi_free_queue() and inlined that function
  in its callers.
- Added two additional patches.

[PATCH 4/4] scsi: Stop accepting SCSI requests before removing a device

[Bart Van Assche]

Avoid that the code for requeueing SCSI requests triggers a
crash by making sure that that code isn't scheduled anymore
after a device has been removed.

Also, source code inspection of __scsi_remove_device() revealed
a race condition in this function: no new SCSI requests must be
accepted for a SCSI device after device removal started.

Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Cc: Mike Christie <michaelc@cs.wisc.edu>
Cc: James Bottomley <JBottomley@parallels.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Joe Lawrence <jdl1291@gmail.com>
Cc: Jun'ichi Nomura <j-nomura@ce.jp.nec.com>
Cc: <stable@kernel.org>
---
 drivers/scsi/scsi_lib.c   |    7 ++++---
 drivers/scsi/scsi_sysfs.c |   11 +++++++++--
 2 files changed, 13 insertions(+), 5 deletions(-)

diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c
index 082c1e5..b722a8b 100644
--- a/drivers/scsi/scsi_lib.c
+++ b/drivers/scsi/scsi_lib.c
@@ -158,10 +158,11 @@ static void __scsi_queue_insert(struct scsi_cmnd *cmd, int reason, int unbusy)
 	 * that are already in the queue.
 	 */
 	spin_lock_irqsave(q->queue_lock, flags);
-	blk_requeue_request(q, cmd->request);
+	if (!blk_queue_dead(q)) {
+		blk_requeue_request(q, cmd->request);
+		kblockd_schedule_work(q, &device->requeue_work);
+	}
 	spin_unlock_irqrestore(q->queue_lock, flags);
-
-	kblockd_schedule_work(q, &device->requeue_work);
 }
 
 /*
diff --git a/drivers/scsi/scsi_sysfs.c b/drivers/scsi/scsi_sysfs.c
index 42c35ff..efffc92 100644
--- a/drivers/scsi/scsi_sysfs.c
+++ b/drivers/scsi/scsi_sysfs.c
@@ -966,13 +966,20 @@ void __scsi_remove_device(struct scsi_device *sdev)
 		device_del(dev);
 	} else
 		put_device(&sdev->sdev_dev);
+
+	/*
+	 * Stop accepting new requests and wait until all queuecommand() and
+	 * scsi_run_queue() invocations have finished before tearing down the
+	 * device.
+	 */
 	scsi_device_set_state(sdev, SDEV_DEL);
+	blk_cleanup_queue(sdev->request_queue);
+	cancel_work_sync(&sdev->requeue_work);
+
 	if (sdev->host->hostt->slave_destroy)
 		sdev->host->hostt->slave_destroy(sdev);
 	transport_destroy_device(dev);
 
-	/* Freeing the queue signals to block that we're done */
-	blk_cleanup_queue(sdev->request_queue);
 	put_device(dev);
 }
 

Re: [PATCH 4/4] scsi: Stop accepting SCSI requests before removing a device

[Mike Christie]

On 06/05/2012 12:14 PM, Bart Van Assche wrote:
> Avoid that the code for requeueing SCSI requests triggers a
> crash by making sure that that code isn't scheduled anymore
> after a device has been removed.
> 
> Also, source code inspection of __scsi_remove_device() revealed
> a race condition in this function: no new SCSI requests must be
> accepted for a SCSI device after device removal started.
> 
> Signed-off-by: Bart Van Assche <bvanassche@acm.org>
> Cc: Mike Christie <michaelc@cs.wisc.edu>
> Cc: James Bottomley <JBottomley@parallels.com>
> Cc: Jens Axboe <axboe@kernel.dk>
> Cc: Joe Lawrence <jdl1291@gmail.com>
> Cc: Jun'ichi Nomura <j-nomura@ce.jp.nec.com>
> Cc: <stable@kernel.org>
> ---
>  drivers/scsi/scsi_lib.c   |    7 ++++---
>  drivers/scsi/scsi_sysfs.c |   11 +++++++++--
>  2 files changed, 13 insertions(+), 5 deletions(-)
> 
> diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c
> index 082c1e5..b722a8b 100644
> --- a/drivers/scsi/scsi_lib.c
> +++ b/drivers/scsi/scsi_lib.c
> @@ -158,10 +158,11 @@ static void __scsi_queue_insert(struct scsi_cmnd *cmd, int reason, int unbusy)
>  	 * that are already in the queue.
>  	 */
>  	spin_lock_irqsave(q->queue_lock, flags);
> -	blk_requeue_request(q, cmd->request);
> +	if (!blk_queue_dead(q)) {
> +		blk_requeue_request(q, cmd->request);
> +		kblockd_schedule_work(q, &device->requeue_work);
> +	}

If we do not requeue what eventually frees the request?

Re: [PATCH 4/4] scsi: Stop accepting SCSI requests before removing a device

[Bart Van Assche]

On 06/05/12 21:36, Mike Christie wrote:

> On 06/05/2012 12:14 PM, Bart Van Assche wrote:
>> Avoid that the code for requeueing SCSI requests triggers a
>> crash by making sure that that code isn't scheduled anymore
>> after a device has been removed.
>>
>> Also, source code inspection of __scsi_remove_device() revealed
>> a race condition in this function: no new SCSI requests must be
>> accepted for a SCSI device after device removal started.
>>
>> Signed-off-by: Bart Van Assche <bvanassche@acm.org>
>> Cc: Mike Christie <michaelc@cs.wisc.edu>
>> Cc: James Bottomley <JBottomley@parallels.com>
>> Cc: Jens Axboe <axboe@kernel.dk>
>> Cc: Joe Lawrence <jdl1291@gmail.com>
>> Cc: Jun'ichi Nomura <j-nomura@ce.jp.nec.com>
>> Cc: <stable@kernel.org>
>> ---
>>  drivers/scsi/scsi_lib.c   |    7 ++++---
>>  drivers/scsi/scsi_sysfs.c |   11 +++++++++--
>>  2 files changed, 13 insertions(+), 5 deletions(-)
>>
>> diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c
>> index 082c1e5..b722a8b 100644
>> --- a/drivers/scsi/scsi_lib.c
>> +++ b/drivers/scsi/scsi_lib.c
>> @@ -158,10 +158,11 @@ static void __scsi_queue_insert(struct scsi_cmnd *cmd, int reason, int unbusy)
>>  	 * that are already in the queue.
>>  	 */
>>  	spin_lock_irqsave(q->queue_lock, flags);
>> -	blk_requeue_request(q, cmd->request);
>> +	if (!blk_queue_dead(q)) {
>> +		blk_requeue_request(q, cmd->request);
>> +		kblockd_schedule_work(q, &device->requeue_work);
>> +	}
> 
> If we do not requeue what eventually frees the request?

As far as I can see any request passed to __scsi_queue_insert() has
already been started. So if it isn't requeued it's timer remains active
and hence will fire eventually.

Bart.

Re: [PATCH 4/4] scsi: Stop accepting SCSI requests before removing a device

[Mike Christie]

On 06/06/2012 07:17 AM, Bart Van Assche wrote:
> On 06/05/12 21:36, Mike Christie wrote:
> 
>> On 06/05/2012 12:14 PM, Bart Van Assche wrote:
>>> Avoid that the code for requeueing SCSI requests triggers a
>>> crash by making sure that that code isn't scheduled anymore
>>> after a device has been removed.
>>>
>>> Also, source code inspection of __scsi_remove_device() revealed
>>> a race condition in this function: no new SCSI requests must be
>>> accepted for a SCSI device after device removal started.
>>>
>>> Signed-off-by: Bart Van Assche <bvanassche@acm.org>
>>> Cc: Mike Christie <michaelc@cs.wisc.edu>
>>> Cc: James Bottomley <JBottomley@parallels.com>
>>> Cc: Jens Axboe <axboe@kernel.dk>
>>> Cc: Joe Lawrence <jdl1291@gmail.com>
>>> Cc: Jun'ichi Nomura <j-nomura@ce.jp.nec.com>
>>> Cc: <stable@kernel.org>
>>> ---
>>>  drivers/scsi/scsi_lib.c   |    7 ++++---
>>>  drivers/scsi/scsi_sysfs.c |   11 +++++++++--
>>>  2 files changed, 13 insertions(+), 5 deletions(-)
>>>
>>> diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c
>>> index 082c1e5..b722a8b 100644
>>> --- a/drivers/scsi/scsi_lib.c
>>> +++ b/drivers/scsi/scsi_lib.c
>>> @@ -158,10 +158,11 @@ static void __scsi_queue_insert(struct scsi_cmnd *cmd, int reason, int unbusy)
>>>  	 * that are already in the queue.
>>>  	 */
>>>  	spin_lock_irqsave(q->queue_lock, flags);
>>> -	blk_requeue_request(q, cmd->request);
>>> +	if (!blk_queue_dead(q)) {
>>> +		blk_requeue_request(q, cmd->request);
>>> +		kblockd_schedule_work(q, &device->requeue_work);
>>> +	}
>>
>> If we do not requeue what eventually frees the request?
> 
> As far as I can see any request passed to __scsi_queue_insert() has
> already been started. So if it isn't requeued it's timer remains active
> and hence will fire eventually.

This is true in the scsi_dispatch_cmd path, but not others.

If we were requeueing from the error handler scsi_eh_flush_done_q then
the timer would have been stopped because that is how we got into the eh.

If we are coming from the completion path then the timer will not be
running basically. For example if we requeue from scsi_softirq_done or
scsi_io_completion then we will have called blk_complete_request in
scsi_done already, so the blk_mark_rq_complete call in there would
prevent the timer code from running on the request.

Re: [PATCH 4/4] scsi: Stop accepting SCSI requests before removing a device

[Bart Van Assche]

On 06/06/12 13:29, Mike Christie wrote:

> On 06/06/2012 07:17 AM, Bart Van Assche wrote:
>> On 06/05/12 21:36, Mike Christie wrote:
>>
>>> On 06/05/2012 12:14 PM, Bart Van Assche wrote:
>>>> Avoid that the code for requeueing SCSI requests triggers a
>>>> crash by making sure that that code isn't scheduled anymore
>>>> after a device has been removed.
>>>>
>>>> Also, source code inspection of __scsi_remove_device() revealed
>>>> a race condition in this function: no new SCSI requests must be
>>>> accepted for a SCSI device after device removal started.
>>>>
>>>> Signed-off-by: Bart Van Assche <bvanassche@acm.org>
>>>> Cc: Mike Christie <michaelc@cs.wisc.edu>
>>>> Cc: James Bottomley <JBottomley@parallels.com>
>>>> Cc: Jens Axboe <axboe@kernel.dk>
>>>> Cc: Joe Lawrence <jdl1291@gmail.com>
>>>> Cc: Jun'ichi Nomura <j-nomura@ce.jp.nec.com>
>>>> Cc: <stable@kernel.org>
>>>> ---
>>>>  drivers/scsi/scsi_lib.c   |    7 ++++---
>>>>  drivers/scsi/scsi_sysfs.c |   11 +++++++++--
>>>>  2 files changed, 13 insertions(+), 5 deletions(-)
>>>>
>>>> diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c
>>>> index 082c1e5..b722a8b 100644
>>>> --- a/drivers/scsi/scsi_lib.c
>>>> +++ b/drivers/scsi/scsi_lib.c
>>>> @@ -158,10 +158,11 @@ static void __scsi_queue_insert(struct scsi_cmnd *cmd, int reason, int unbusy)
>>>>  	 * that are already in the queue.
>>>>  	 */
>>>>  	spin_lock_irqsave(q->queue_lock, flags);
>>>> -	blk_requeue_request(q, cmd->request);
>>>> +	if (!blk_queue_dead(q)) {
>>>> +		blk_requeue_request(q, cmd->request);
>>>> +		kblockd_schedule_work(q, &device->requeue_work);
>>>> +	}
>>>
>>> If we do not requeue what eventually frees the request?
>>
>> As far as I can see any request passed to __scsi_queue_insert() has
>> already been started. So if it isn't requeued it's timer remains active
>> and hence will fire eventually.
> 
> This is true in the scsi_dispatch_cmd path, but not others.
> 
> If we were requeueing from the error handler scsi_eh_flush_done_q then
> the timer would have been stopped because that is how we got into the eh.


Given the above I propose to add a __blk_end_request_all(req, -ENXIO)
call if the queue is dead.

Bart.


 

Re: [PATCH 4/4] scsi: Stop accepting SCSI requests before removing a device

[Mike Christie]

On 06/06/2012 09:53 AM, Bart Van Assche wrote:
> On 06/06/12 13:29, Mike Christie wrote:
> 
>> On 06/06/2012 07:17 AM, Bart Van Assche wrote:
>>> On 06/05/12 21:36, Mike Christie wrote:
>>>
>>>> On 06/05/2012 12:14 PM, Bart Van Assche wrote:
>>>>> Avoid that the code for requeueing SCSI requests triggers a
>>>>> crash by making sure that that code isn't scheduled anymore
>>>>> after a device has been removed.
>>>>>
>>>>> Also, source code inspection of __scsi_remove_device() revealed
>>>>> a race condition in this function: no new SCSI requests must be
>>>>> accepted for a SCSI device after device removal started.
>>>>>
>>>>> Signed-off-by: Bart Van Assche <bvanassche@acm.org>
>>>>> Cc: Mike Christie <michaelc@cs.wisc.edu>
>>>>> Cc: James Bottomley <JBottomley@parallels.com>
>>>>> Cc: Jens Axboe <axboe@kernel.dk>
>>>>> Cc: Joe Lawrence <jdl1291@gmail.com>
>>>>> Cc: Jun'ichi Nomura <j-nomura@ce.jp.nec.com>
>>>>> Cc: <stable@kernel.org>
>>>>> ---
>>>>>  drivers/scsi/scsi_lib.c   |    7 ++++---
>>>>>  drivers/scsi/scsi_sysfs.c |   11 +++++++++--
>>>>>  2 files changed, 13 insertions(+), 5 deletions(-)
>>>>>
>>>>> diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c
>>>>> index 082c1e5..b722a8b 100644
>>>>> --- a/drivers/scsi/scsi_lib.c
>>>>> +++ b/drivers/scsi/scsi_lib.c
>>>>> @@ -158,10 +158,11 @@ static void __scsi_queue_insert(struct scsi_cmnd *cmd, int reason, int unbusy)
>>>>>  	 * that are already in the queue.
>>>>>  	 */
>>>>>  	spin_lock_irqsave(q->queue_lock, flags);
>>>>> -	blk_requeue_request(q, cmd->request);
>>>>> +	if (!blk_queue_dead(q)) {
>>>>> +		blk_requeue_request(q, cmd->request);
>>>>> +		kblockd_schedule_work(q, &device->requeue_work);
>>>>> +	}
>>>>
>>>> If we do not requeue what eventually frees the request?
>>>
>>> As far as I can see any request passed to __scsi_queue_insert() has
>>> already been started. So if it isn't requeued it's timer remains active
>>> and hence will fire eventually.
>>
>> This is true in the scsi_dispatch_cmd path, but not others.
>>
>> If we were requeueing from the error handler scsi_eh_flush_done_q then
>> the timer would have been stopped because that is how we got into the eh.
> 
> 
> Given the above I propose to add a __blk_end_request_all(req, -ENXIO)
> call if the queue is dead.
> 

Seems ok to me. Maybe a little messy. Don't forget to free the scsi
stuff like the scatterlist, scsi_cmnd, etc. If it is REQ_TYPE_BLOCK_PC
set req->errors.

Re: [PATCH 4/4] scsi: Stop accepting SCSI requests before removing a device

[Mike Christie]

On 06/05/2012 12:14 PM, Bart Van Assche wrote:
> Avoid that the code for requeueing SCSI requests triggers a
> crash by making sure that that code isn't scheduled anymore
> after a device has been removed.
> 
> Also, source code inspection of __scsi_remove_device() revealed
> a race condition in this function: no new SCSI requests must be
> accepted for a SCSI device after device removal started.
> 
> Signed-off-by: Bart Van Assche <bvanassche@acm.org>
> Cc: Mike Christie <michaelc@cs.wisc.edu>
> Cc: James Bottomley <JBottomley@parallels.com>
> Cc: Jens Axboe <axboe@kernel.dk>
> Cc: Joe Lawrence <jdl1291@gmail.com>
> Cc: Jun'ichi Nomura <j-nomura@ce.jp.nec.com>
> Cc: <stable@kernel.org>
> ---
>  drivers/scsi/scsi_lib.c   |    7 ++++---
>  drivers/scsi/scsi_sysfs.c |   11 +++++++++--
>  2 files changed, 13 insertions(+), 5 deletions(-)
> 
> diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c
> index 082c1e5..b722a8b 100644
> --- a/drivers/scsi/scsi_lib.c
> +++ b/drivers/scsi/scsi_lib.c
> @@ -158,10 +158,11 @@ static void __scsi_queue_insert(struct scsi_cmnd *cmd, int reason, int unbusy)
>  	 * that are already in the queue.
>  	 */
>  	spin_lock_irqsave(q->queue_lock, flags);
> -	blk_requeue_request(q, cmd->request);
> +	if (!blk_queue_dead(q)) {
> +		blk_requeue_request(q, cmd->request);
> +		kblockd_schedule_work(q, &device->requeue_work);
> +	}
>  	spin_unlock_irqrestore(q->queue_lock, flags);
> -
> -	kblockd_schedule_work(q, &device->requeue_work);

If we do not have the part of the patch above, but have your other
patches and the code below, will we  be ok?

I think we will requeue the request, then blk_drain_queue will end up
running the queue (blk_drain_queue will not return while req is requeued
because the rq count is still incremented). Then scsi_request_fn will be
run. blk_peek_request will give us the requeued request. We will hit the
scsi_device_online check with the state being SDEV_DEL, and then call we
call scsi_kill_request. This should then lead to the scsi_cmnd and its
other scsi stuff, like the scatterlist, and sense bufffer, to be
released. And then the request struct will be finished and freed and
then the rq count decremented?


>  }
>  
>  /*
> diff --git a/drivers/scsi/scsi_sysfs.c b/drivers/scsi/scsi_sysfs.c
> index 42c35ff..efffc92 100644
> --- a/drivers/scsi/scsi_sysfs.c
> +++ b/drivers/scsi/scsi_sysfs.c
> @@ -966,13 +966,20 @@ void __scsi_remove_device(struct scsi_device *sdev)
>  		device_del(dev);
>  	} else
>  		put_device(&sdev->sdev_dev);
> +
> +	/*
> +	 * Stop accepting new requests and wait until all queuecommand() and
> +	 * scsi_run_queue() invocations have finished before tearing down the
> +	 * device.
> +	 */
>  	scsi_device_set_state(sdev, SDEV_DEL);
> +	blk_cleanup_queue(sdev->request_queue);
> +	cancel_work_sync(&sdev->requeue_work);


I agree we do still need this part of the patch with the cancel, because
the workstruct could still be queued but something could run the queue
without dequeueing the workstruct. That would free the request and that
could lead to blk_cleanup_queue running and us freeing the scsi_device
from under the workstruct.

> +
>  	if (sdev->host->hostt->slave_destroy)
>  		sdev->host->hostt->slave_destroy(sdev);
>  	transport_destroy_device(dev);
>  
> -	/* Freeing the queue signals to block that we're done */
> -	blk_cleanup_queue(sdev->request_queue);
>  	put_device(dev);
>  }
>  

Re: [PATCH 4/4] scsi: Stop accepting SCSI requests before removing a device

[Bart Van Assche]

On 06/05/12 22:08, Mike Christie wrote:

> On 06/05/2012 12:14 PM, Bart Van Assche wrote:
>> Avoid that the code for requeueing SCSI requests triggers a
>> crash by making sure that that code isn't scheduled anymore
>> after a device has been removed.
>>
>> Also, source code inspection of __scsi_remove_device() revealed
>> a race condition in this function: no new SCSI requests must be
>> accepted for a SCSI device after device removal started.
>>
>> Signed-off-by: Bart Van Assche <bvanassche@acm.org>
>> Cc: Mike Christie <michaelc@cs.wisc.edu>
>> Cc: James Bottomley <JBottomley@parallels.com>
>> Cc: Jens Axboe <axboe@kernel.dk>
>> Cc: Joe Lawrence <jdl1291@gmail.com>
>> Cc: Jun'ichi Nomura <j-nomura@ce.jp.nec.com>
>> Cc: <stable@kernel.org>
>> ---
>>  drivers/scsi/scsi_lib.c   |    7 ++++---
>>  drivers/scsi/scsi_sysfs.c |   11 +++++++++--
>>  2 files changed, 13 insertions(+), 5 deletions(-)
>>
>> diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c
>> index 082c1e5..b722a8b 100644
>> --- a/drivers/scsi/scsi_lib.c
>> +++ b/drivers/scsi/scsi_lib.c
>> @@ -158,10 +158,11 @@ static void __scsi_queue_insert(struct scsi_cmnd *cmd, int reason, int unbusy)
>>  	 * that are already in the queue.
>>  	 */
>>  	spin_lock_irqsave(q->queue_lock, flags);
>> -	blk_requeue_request(q, cmd->request);
>> +	if (!blk_queue_dead(q)) {
>> +		blk_requeue_request(q, cmd->request);
>> +		kblockd_schedule_work(q, &device->requeue_work);
>> +	}
>>  	spin_unlock_irqrestore(q->queue_lock, flags);
>> -
>> -	kblockd_schedule_work(q, &device->requeue_work);
> 
> If we do not have the part of the patch above, but have your other
> patches and the code below, will we be ok?


I'm not sure. Without the above part the request could get killed after
the blk_requeue_request() call finished but before the requeue_work is
scheduled, e.g. because the request timer fired or due to a
blk_abort_queue() call.

Bart.

Re: [PATCH 4/4] scsi: Stop accepting SCSI requests before removing a device

[Mike Christie]

On 06/06/2012 07:25 AM, Bart Van Assche wrote:
> On 06/05/12 22:08, Mike Christie wrote:
> 
>> On 06/05/2012 12:14 PM, Bart Van Assche wrote:
>>> Avoid that the code for requeueing SCSI requests triggers a
>>> crash by making sure that that code isn't scheduled anymore
>>> after a device has been removed.
>>>
>>> Also, source code inspection of __scsi_remove_device() revealed
>>> a race condition in this function: no new SCSI requests must be
>>> accepted for a SCSI device after device removal started.
>>>
>>> Signed-off-by: Bart Van Assche <bvanassche@acm.org>
>>> Cc: Mike Christie <michaelc@cs.wisc.edu>
>>> Cc: James Bottomley <JBottomley@parallels.com>
>>> Cc: Jens Axboe <axboe@kernel.dk>
>>> Cc: Joe Lawrence <jdl1291@gmail.com>
>>> Cc: Jun'ichi Nomura <j-nomura@ce.jp.nec.com>
>>> Cc: <stable@kernel.org>
>>> ---
>>>  drivers/scsi/scsi_lib.c   |    7 ++++---
>>>  drivers/scsi/scsi_sysfs.c |   11 +++++++++--
>>>  2 files changed, 13 insertions(+), 5 deletions(-)
>>>
>>> diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c
>>> index 082c1e5..b722a8b 100644
>>> --- a/drivers/scsi/scsi_lib.c
>>> +++ b/drivers/scsi/scsi_lib.c
>>> @@ -158,10 +158,11 @@ static void __scsi_queue_insert(struct scsi_cmnd *cmd, int reason, int unbusy)
>>>  	 * that are already in the queue.
>>>  	 */
>>>  	spin_lock_irqsave(q->queue_lock, flags);
>>> -	blk_requeue_request(q, cmd->request);
>>> +	if (!blk_queue_dead(q)) {
>>> +		blk_requeue_request(q, cmd->request);
>>> +		kblockd_schedule_work(q, &device->requeue_work);
>>> +	}
>>>  	spin_unlock_irqrestore(q->queue_lock, flags);
>>> -
>>> -	kblockd_schedule_work(q, &device->requeue_work);
>>
>> If we do not have the part of the patch above, but have your other
>> patches and the code below, will we be ok?
> 
> 
> I'm not sure. Without the above part the request could get killed after
> the blk_requeue_request() call finished but before the requeue_work is
> scheduled, e.g. because the request timer fired or due to a
> blk_abort_queue() call.
> 

You are right.

What if we moved the requeue work struct to the request queue, then have
blk_cleanup_queue or blk_drain_queue call cancel_work_sync before the
queue is freed. That way that code could make sure the queue and work is
flushed and drained, and it can make sure it is flushed and drained
before freeing the queue?

Re: [PATCH 4/4] scsi: Stop accepting SCSI requests before removing a device

[Mike Christie]

On 06/06/2012 08:43 AM, Mike Christie wrote:
> On 06/06/2012 07:25 AM, Bart Van Assche wrote:
>> On 06/05/12 22:08, Mike Christie wrote:
>>
>>> On 06/05/2012 12:14 PM, Bart Van Assche wrote:
>>>> Avoid that the code for requeueing SCSI requests triggers a
>>>> crash by making sure that that code isn't scheduled anymore
>>>> after a device has been removed.
>>>>
>>>> Also, source code inspection of __scsi_remove_device() revealed
>>>> a race condition in this function: no new SCSI requests must be
>>>> accepted for a SCSI device after device removal started.
>>>>
>>>> Signed-off-by: Bart Van Assche <bvanassche@acm.org>
>>>> Cc: Mike Christie <michaelc@cs.wisc.edu>
>>>> Cc: James Bottomley <JBottomley@parallels.com>
>>>> Cc: Jens Axboe <axboe@kernel.dk>
>>>> Cc: Joe Lawrence <jdl1291@gmail.com>
>>>> Cc: Jun'ichi Nomura <j-nomura@ce.jp.nec.com>
>>>> Cc: <stable@kernel.org>
>>>> ---
>>>>  drivers/scsi/scsi_lib.c   |    7 ++++---
>>>>  drivers/scsi/scsi_sysfs.c |   11 +++++++++--
>>>>  2 files changed, 13 insertions(+), 5 deletions(-)
>>>>
>>>> diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c
>>>> index 082c1e5..b722a8b 100644
>>>> --- a/drivers/scsi/scsi_lib.c
>>>> +++ b/drivers/scsi/scsi_lib.c
>>>> @@ -158,10 +158,11 @@ static void __scsi_queue_insert(struct scsi_cmnd *cmd, int reason, int unbusy)
>>>>  	 * that are already in the queue.
>>>>  	 */
>>>>  	spin_lock_irqsave(q->queue_lock, flags);
>>>> -	blk_requeue_request(q, cmd->request);
>>>> +	if (!blk_queue_dead(q)) {
>>>> +		blk_requeue_request(q, cmd->request);
>>>> +		kblockd_schedule_work(q, &device->requeue_work);
>>>> +	}
>>>>  	spin_unlock_irqrestore(q->queue_lock, flags);
>>>> -
>>>> -	kblockd_schedule_work(q, &device->requeue_work);
>>>
>>> If we do not have the part of the patch above, but have your other
>>> patches and the code below, will we be ok?
>>
>>
>> I'm not sure. Without the above part the request could get killed after
>> the blk_requeue_request() call finished but before the requeue_work is
>> scheduled, e.g. because the request timer fired or due to a
>> blk_abort_queue() call.
>>
> 
> You are right.
> 
> What if we moved the requeue work struct to the request queue, then have
> blk_cleanup_queue or blk_drain_queue call cancel_work_sync before the
> queue is freed. That way that code could make sure the queue and work is
> flushed and drained, and it can make sure it is flushed and drained
> before freeing the queue?

Oh yeah, one clarification. With the above proposal we would do the part
of your patch where we do the requeue and schedule under the queue lock.
We would just do not do the blk_queue_dead check. We would just always
requeue like before.

I think no matter what blk_abort_queue is going to be a problem. I wish
we would have removed the code so btrfs was not using it now. As you
know from that other thread we removed it from dm-multipath use, because
bad things can happen if things like blk_abort_queue runs at the same
time blk_requeue_request was from the queueing path. Same goes for the
race where a cmd times out in scsi_dispatch_cmd (so if you did something
evil like set a timeout of 0 seconds you hit a similar problem as with
blk_abort_queue use).

Re: [PATCH 4/4] scsi: Stop accepting SCSI requests before removing a device

[Mike Christie]

On 06/06/2012 08:43 AM, Mike Christie wrote:
> On 06/06/2012 07:25 AM, Bart Van Assche wrote:
>> On 06/05/12 22:08, Mike Christie wrote:
>>
>>> On 06/05/2012 12:14 PM, Bart Van Assche wrote:
>>>> Avoid that the code for requeueing SCSI requests triggers a
>>>> crash by making sure that that code isn't scheduled anymore
>>>> after a device has been removed.
>>>>
>>>> Also, source code inspection of __scsi_remove_device() revealed
>>>> a race condition in this function: no new SCSI requests must be
>>>> accepted for a SCSI device after device removal started.
>>>>
>>>> Signed-off-by: Bart Van Assche <bvanassche@acm.org>
>>>> Cc: Mike Christie <michaelc@cs.wisc.edu>
>>>> Cc: James Bottomley <JBottomley@parallels.com>
>>>> Cc: Jens Axboe <axboe@kernel.dk>
>>>> Cc: Joe Lawrence <jdl1291@gmail.com>
>>>> Cc: Jun'ichi Nomura <j-nomura@ce.jp.nec.com>
>>>> Cc: <stable@kernel.org>
>>>> ---
>>>>  drivers/scsi/scsi_lib.c   |    7 ++++---
>>>>  drivers/scsi/scsi_sysfs.c |   11 +++++++++--
>>>>  2 files changed, 13 insertions(+), 5 deletions(-)
>>>>
>>>> diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c
>>>> index 082c1e5..b722a8b 100644
>>>> --- a/drivers/scsi/scsi_lib.c
>>>> +++ b/drivers/scsi/scsi_lib.c
>>>> @@ -158,10 +158,11 @@ static void __scsi_queue_insert(struct scsi_cmnd *cmd, int reason, int unbusy)
>>>>  	 * that are already in the queue.
>>>>  	 */
>>>>  	spin_lock_irqsave(q->queue_lock, flags);
>>>> -	blk_requeue_request(q, cmd->request);
>>>> +	if (!blk_queue_dead(q)) {
>>>> +		blk_requeue_request(q, cmd->request);
>>>> +		kblockd_schedule_work(q, &device->requeue_work);
>>>> +	}
>>>>  	spin_unlock_irqrestore(q->queue_lock, flags);
>>>> -
>>>> -	kblockd_schedule_work(q, &device->requeue_work);
>>>
>>> If we do not have the part of the patch above, but have your other
>>> patches and the code below, will we be ok?
>>
>>
>> I'm not sure. Without the above part the request could get killed after
>> the blk_requeue_request() call finished but before the requeue_work is
>> scheduled, e.g. because the request timer fired or due to a
>> blk_abort_queue() call.
>>
> 
> You are right.
> 
> What if we moved the requeue work struct to the request queue, then have
> blk_cleanup_queue or blk_drain_queue call cancel_work_sync before the
> queue is freed. That way that code could make sure the queue and work is
> flushed and drained, and it can make sure it is flushed and drained
> before freeing the queue?

Or, in scsi_requeue_run_queue could we just add a check for the
scsi_device being in the SDEV_DEL state. That combined with your cancel
call in __scsi_remove_device would prevent us from running a cleaned up
queue, right?

Re: [PATCH 4/4] scsi: Stop accepting SCSI requests before removing a device

[Bart Van Assche]

On 06/06/12 14:12, Mike Christie wrote:

> On 06/06/2012 08:43 AM, Mike Christie wrote:
>> On 06/06/2012 07:25 AM, Bart Van Assche wrote:
>>> On 06/05/12 22:08, Mike Christie wrote:
>>>
>>>> On 06/05/2012 12:14 PM, Bart Van Assche wrote:
>>>>> Avoid that the code for requeueing SCSI requests triggers a
>>>>> crash by making sure that that code isn't scheduled anymore
>>>>> after a device has been removed.
>>>>>
>>>>> Also, source code inspection of __scsi_remove_device() revealed
>>>>> a race condition in this function: no new SCSI requests must be
>>>>> accepted for a SCSI device after device removal started.
>>>>>
>>>>> Signed-off-by: Bart Van Assche <bvanassche@acm.org>
>>>>> Cc: Mike Christie <michaelc@cs.wisc.edu>
>>>>> Cc: James Bottomley <JBottomley@parallels.com>
>>>>> Cc: Jens Axboe <axboe@kernel.dk>
>>>>> Cc: Joe Lawrence <jdl1291@gmail.com>
>>>>> Cc: Jun'ichi Nomura <j-nomura@ce.jp.nec.com>
>>>>> Cc: <stable@kernel.org>
>>>>> ---
>>>>>  drivers/scsi/scsi_lib.c   |    7 ++++---
>>>>>  drivers/scsi/scsi_sysfs.c |   11 +++++++++--
>>>>>  2 files changed, 13 insertions(+), 5 deletions(-)
>>>>>
>>>>> diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c
>>>>> index 082c1e5..b722a8b 100644
>>>>> --- a/drivers/scsi/scsi_lib.c
>>>>> +++ b/drivers/scsi/scsi_lib.c
>>>>> @@ -158,10 +158,11 @@ static void __scsi_queue_insert(struct scsi_cmnd *cmd, int reason, int unbusy)
>>>>>  	 * that are already in the queue.
>>>>>  	 */
>>>>>  	spin_lock_irqsave(q->queue_lock, flags);
>>>>> -	blk_requeue_request(q, cmd->request);
>>>>> +	if (!blk_queue_dead(q)) {
>>>>> +		blk_requeue_request(q, cmd->request);
>>>>> +		kblockd_schedule_work(q, &device->requeue_work);
>>>>> +	}
>>>>>  	spin_unlock_irqrestore(q->queue_lock, flags);
>>>>> -
>>>>> -	kblockd_schedule_work(q, &device->requeue_work);
>>>>
>>>> If we do not have the part of the patch above, but have your other
>>>> patches and the code below, will we be ok?
>>>
>>>
>>> I'm not sure. Without the above part the request could get killed after
>>> the blk_requeue_request() call finished but before the requeue_work is
>>> scheduled, e.g. because the request timer fired or due to a
>>> blk_abort_queue() call.
>>>
>>
>> You are right.
>>
>> What if we moved the requeue work struct to the request queue, then have
>> blk_cleanup_queue or blk_drain_queue call cancel_work_sync before the
>> queue is freed. That way that code could make sure the queue and work is
>> flushed and drained, and it can make sure it is flushed and drained
>> before freeing the queue?
> 
> Or, in scsi_requeue_run_queue could we just add a check for the
> scsi_device being in the SDEV_DEL state. That combined with your cancel
> call in __scsi_remove_device would prevent us from running a cleaned up
> queue, right?


I'm not sure. If a requeued request times out before blk_cleanup_queue()
is invoked then it's possible that the requeue_work is started after the
struct scsi_device has already been deleted.

Bart.

 

Re: [PATCH 4/4] scsi: Stop accepting SCSI requests before removing a device

[Mike Christie]

On 06/06/2012 10:04 AM, Bart Van Assche wrote:
> On 06/06/12 14:12, Mike Christie wrote:
> 
>> On 06/06/2012 08:43 AM, Mike Christie wrote:
>>> On 06/06/2012 07:25 AM, Bart Van Assche wrote:
>>>> On 06/05/12 22:08, Mike Christie wrote:
>>>>
>>>>> On 06/05/2012 12:14 PM, Bart Van Assche wrote:
>>>>>> Avoid that the code for requeueing SCSI requests triggers a
>>>>>> crash by making sure that that code isn't scheduled anymore
>>>>>> after a device has been removed.
>>>>>>
>>>>>> Also, source code inspection of __scsi_remove_device() revealed
>>>>>> a race condition in this function: no new SCSI requests must be
>>>>>> accepted for a SCSI device after device removal started.
>>>>>>
>>>>>> Signed-off-by: Bart Van Assche <bvanassche@acm.org>
>>>>>> Cc: Mike Christie <michaelc@cs.wisc.edu>
>>>>>> Cc: James Bottomley <JBottomley@parallels.com>
>>>>>> Cc: Jens Axboe <axboe@kernel.dk>
>>>>>> Cc: Joe Lawrence <jdl1291@gmail.com>
>>>>>> Cc: Jun'ichi Nomura <j-nomura@ce.jp.nec.com>
>>>>>> Cc: <stable@kernel.org>
>>>>>> ---
>>>>>>  drivers/scsi/scsi_lib.c   |    7 ++++---
>>>>>>  drivers/scsi/scsi_sysfs.c |   11 +++++++++--
>>>>>>  2 files changed, 13 insertions(+), 5 deletions(-)
>>>>>>
>>>>>> diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c
>>>>>> index 082c1e5..b722a8b 100644
>>>>>> --- a/drivers/scsi/scsi_lib.c
>>>>>> +++ b/drivers/scsi/scsi_lib.c
>>>>>> @@ -158,10 +158,11 @@ static void __scsi_queue_insert(struct scsi_cmnd *cmd, int reason, int unbusy)
>>>>>>  	 * that are already in the queue.
>>>>>>  	 */
>>>>>>  	spin_lock_irqsave(q->queue_lock, flags);
>>>>>> -	blk_requeue_request(q, cmd->request);
>>>>>> +	if (!blk_queue_dead(q)) {
>>>>>> +		blk_requeue_request(q, cmd->request);
>>>>>> +		kblockd_schedule_work(q, &device->requeue_work);
>>>>>> +	}
>>>>>>  	spin_unlock_irqrestore(q->queue_lock, flags);
>>>>>> -
>>>>>> -	kblockd_schedule_work(q, &device->requeue_work);
>>>>>
>>>>> If we do not have the part of the patch above, but have your other
>>>>> patches and the code below, will we be ok?
>>>>
>>>>
>>>> I'm not sure. Without the above part the request could get killed after
>>>> the blk_requeue_request() call finished but before the requeue_work is
>>>> scheduled, e.g. because the request timer fired or due to a
>>>> blk_abort_queue() call.
>>>>
>>>
>>> You are right.
>>>
>>> What if we moved the requeue work struct to the request queue, then have
>>> blk_cleanup_queue or blk_drain_queue call cancel_work_sync before the
>>> queue is freed. That way that code could make sure the queue and work is
>>> flushed and drained, and it can make sure it is flushed and drained
>>> before freeing the queue?
>>
>> Or, in scsi_requeue_run_queue could we just add a check for the
>> scsi_device being in the SDEV_DEL state. That combined with your cancel
>> call in __scsi_remove_device would prevent us from running a cleaned up
>> queue, right?
> 
> 
> I'm not sure. If a requeued request times out before blk_cleanup_queue()
> is invoked then it's possible that the requeue_work is started after the
> struct scsi_device has already been deleted.
> 

Won't the cancel_work_sync call you are adding prevent that? After
blk_cleanup_queue has returned we know that no IO is running or in the
eh, and we know no new IO will be started. And then, after the
cancel_work_sync call you are adding has returned we know that there
will not be any workstruct queued or running.

Re: [PATCH 4/4] scsi: Stop accepting SCSI requests before removing a device

[Bart Van Assche]

On 06/06/12 15:28, Mike Christie wrote:

> On 06/06/2012 10:04 AM, Bart Van Assche wrote:
>> I'm not sure. If a requeued request times out before blk_cleanup_queue()
>> is invoked then it's possible that the requeue_work is started after the
>> struct scsi_device has already been deleted.
> 
> Won't the cancel_work_sync call you are adding prevent that? After
> blk_cleanup_queue has returned we know that no IO is running or in the
> eh, and we know no new IO will be started. And then, after the
> cancel_work_sync call you are adding has returned we know that there
> will not be any workstruct queued or running.


We've probably each made different assumptions about whether or not the
requeue work scheduling happens under the queue lock, so we're probably
both right. I'll prepare, test and post a new patch set, that will make
the discussion easier.

Bart.

 

Re: [PATCH 4/4] scsi: Stop accepting SCSI requests before removing a device

[Bart Van Assche]

On 06/06/12 13:43, Mike Christie wrote:

> What if we moved the requeue work struct to the request queue, then have
> blk_cleanup_queue or blk_drain_queue call cancel_work_sync before the
> queue is freed. That way that code could make sure the queue and work is
> flushed and drained, and it can make sure it is flushed and drained
> before freeing the queue?


Sounds like a good idea to me. However, personally I'd prefer with this
patch set to focus on fixing bugs and to leave such restructuring for a
subsequent patch.

Bart.