From: "Johnny Ström" <johnny.strom@linuxsolutions.fi>
To: linux-scsi@vger.kernel.org
Subject: lpfc and FLOGI failure.
Date: Sun, 28 Apr 2013 18:49:15 +0300 [thread overview]
Message-ID: <517D44FB.5050206@linuxsolutions.fi> (raw)
Hello
We have an Emulex LPe1150 that is causing FLOGI failure when the driver
is loaded.
We have updated the firmware on the card. It is working ok with an old
HP MSA.
But with an new MD36xxf so dose it not work.
when the lpfc driver is loded so dose it take about 7 seconds to load
and efter that so
do we only see these LUN's: We do not see the other disk LUN's
[16:0:0:0] disk DELL MD36xxf 0784 -
[16:0:0:31] disk DELL Universal Xport 0784 -
dmesg shows this after the driver is loaded.
[15313.555729] scsi12 : Emulex LPe1150 1Gb PCIe Fibre Channel Adapter on
PCI bus 0e device 00 irq 30
[15317.795558] lpfc 0000:0e:00.0: 1:1303 Link Up Event x1 received Data:
x1 x1 x10 x2 x0 x0 0
[15317.795680] lpfc 0000:0e:00.0: 1:1309 Link Up Event npiv not
supported in loop topology
[15317.796111] lpfc 0000:0e:00.0: 1:(0):2858 FLOGI failure Status:x3/x18
TMO:x0
[15317.796423] lpfc 0000:0e:00.0: 1:(0):2858 FLOGI failure Status:x3/x18
TMO:x0
[15317.796726] lpfc 0000:0e:00.0: 1:(0):2858 FLOGI failure Status:x3/x18
TMO:x0
[15317.796825] lpfc 0000:0e:00.0: 1:(0):0100 FLOGI failure Status:x3/x18
TMO:x0
Could it be an bug in the lpfc driver when it is used with MD36xxf?
Any suggestions what to do or try?
I have tried kernel version 3.8.8 and it has the same issue.
Best Johnny
next reply other threads:[~2013-04-28 15:56 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-04-28 15:49 Johnny Ström [this message]
2013-04-28 16:38 ` lpfc and FLOGI failure Gurinder (Sunny) Shergill
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=517D44FB.5050206@linuxsolutions.fi \
--to=johnny.strom@linuxsolutions.fi \
--cc=linux-scsi@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox