* [PATCH 8/9] scsi/pm8001: use pdev->pm_cap instead of pci_find_capability(..,PCI_CAP_ID_PM)
@ 2013-06-18 8:23 Yijing Wang
2013-06-18 9:25 ` lindar_liu
` (2 more replies)
0 siblings, 3 replies; 6+ messages in thread
From: Yijing Wang @ 2013-06-18 8:23 UTC (permalink / raw)
To: James E.J. Bottomley
Cc: linux-kernel, Hanjun Guo, jiang.liu, Yijing Wang, xjtuwjp,
lindar_liu, linux-scsi
Pci core has been saved pm cap register offset by pdev->pm_cap in pci_pm_init()
in init path. So we can use pdev->pm_cap instead of using
pci_find_capability(pdev, PCI_CAP_ID_PM) for better performance and simplified code.
Signed-off-by: Yijing Wang <wangyijing@huawei.com>
Cc: xjtuwjp@gmail.com
Cc: lindar_liu@usish.com
Cc: "James E.J. Bottomley" <JBottomley@parallels.com>
Cc: linux-scsi@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
---
drivers/scsi/pm8001/pm8001_init.c | 7 +++----
1 files changed, 3 insertions(+), 4 deletions(-)
diff --git a/drivers/scsi/pm8001/pm8001_init.c b/drivers/scsi/pm8001/pm8001_init.c
index e4b9bc7..3861aa1 100644
--- a/drivers/scsi/pm8001/pm8001_init.c
+++ b/drivers/scsi/pm8001/pm8001_init.c
@@ -912,14 +912,13 @@ static int pm8001_pci_suspend(struct pci_dev *pdev, pm_message_t state)
{
struct sas_ha_struct *sha = pci_get_drvdata(pdev);
struct pm8001_hba_info *pm8001_ha;
- int i , pos;
+ int i;
u32 device_state;
pm8001_ha = sha->lldd_ha;
flush_workqueue(pm8001_wq);
scsi_block_requests(pm8001_ha->shost);
- pos = pci_find_capability(pdev, PCI_CAP_ID_PM);
- if (pos == 0) {
- printk(KERN_ERR " PCI PM not supported\n");
+ if (!pdev->pm_cap) {
+ dev_err(&pdev->dev, " PCI PM not supported\n");
return -ENODEV;
}
PM8001_CHIP_DISP->interrupt_disable(pm8001_ha, 0xFF);
--
1.7.1
^ permalink raw reply related [flat|nested] 6+ messages in thread* RE: [PATCH 8/9] scsi/pm8001: use pdev->pm_cap instead of pci_find_capability(..,PCI_CAP_ID_PM)
2013-06-18 8:23 [PATCH 8/9] scsi/pm8001: use pdev->pm_cap instead of pci_find_capability(..,PCI_CAP_ID_PM) Yijing Wang
@ 2013-06-18 9:25 ` lindar_liu
2013-06-25 12:07 ` Yijing Wang
2013-06-26 9:33 ` Jack Wang
2 siblings, 0 replies; 6+ messages in thread
From: lindar_liu @ 2013-06-18 9:25 UTC (permalink / raw)
To: 'Yijing Wang', 'James E.J. Bottomley'
Cc: linux-kernel, 'Hanjun Guo', jiang.liu, xjtuwjp,
linux-scsi
It works, thanks.
Lindar.
-----Original Message-----
From: Yijing Wang [mailto:wangyijing@huawei.com]
Sent: Tuesday, June 18, 2013 4:24 PM
To: James E.J. Bottomley
Cc: linux-kernel@vger.kernel.org; Hanjun Guo; jiang.liu@huawei.com; Yijing
Wang; xjtuwjp@gmail.com; lindar_liu@usish.com; linux-scsi@vger.kernel.org
Subject: [PATCH 8/9] scsi/pm8001: use pdev->pm_cap instead of
pci_find_capability(..,PCI_CAP_ID_PM)
Pci core has been saved pm cap register offset by pdev->pm_cap in
pci_pm_init() in init path. So we can use pdev->pm_cap instead of using
pci_find_capability(pdev, PCI_CAP_ID_PM) for better performance and
simplified code.
Signed-off-by: Yijing Wang <wangyijing@huawei.com>
Cc: xjtuwjp@gmail.com
Cc: lindar_liu@usish.com
Cc: "James E.J. Bottomley" <JBottomley@parallels.com>
Cc: linux-scsi@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
---
drivers/scsi/pm8001/pm8001_init.c | 7 +++----
1 files changed, 3 insertions(+), 4 deletions(-)
diff --git a/drivers/scsi/pm8001/pm8001_init.c
b/drivers/scsi/pm8001/pm8001_init.c
index e4b9bc7..3861aa1 100644
--- a/drivers/scsi/pm8001/pm8001_init.c
+++ b/drivers/scsi/pm8001/pm8001_init.c
@@ -912,14 +912,13 @@ static int pm8001_pci_suspend(struct pci_dev *pdev,
pm_message_t state) {
struct sas_ha_struct *sha = pci_get_drvdata(pdev);
struct pm8001_hba_info *pm8001_ha;
- int i , pos;
+ int i;
u32 device_state;
pm8001_ha = sha->lldd_ha;
flush_workqueue(pm8001_wq);
scsi_block_requests(pm8001_ha->shost);
- pos = pci_find_capability(pdev, PCI_CAP_ID_PM);
- if (pos == 0) {
- printk(KERN_ERR " PCI PM not supported\n");
+ if (!pdev->pm_cap) {
+ dev_err(&pdev->dev, " PCI PM not supported\n");
return -ENODEV;
}
PM8001_CHIP_DISP->interrupt_disable(pm8001_ha, 0xFF);
--
1.7.1
^ permalink raw reply related [flat|nested] 6+ messages in thread* Re: [PATCH 8/9] scsi/pm8001: use pdev->pm_cap instead of pci_find_capability(..,PCI_CAP_ID_PM)
2013-06-18 8:23 [PATCH 8/9] scsi/pm8001: use pdev->pm_cap instead of pci_find_capability(..,PCI_CAP_ID_PM) Yijing Wang
2013-06-18 9:25 ` lindar_liu
@ 2013-06-25 12:07 ` Yijing Wang
2013-06-26 9:33 ` Jack Wang
2 siblings, 0 replies; 6+ messages in thread
From: Yijing Wang @ 2013-06-25 12:07 UTC (permalink / raw)
To: James E.J. Bottomley
Cc: Yijing Wang, linux-kernel, xjtuwjp, lindar_liu, linux-scsi
Hi,
Any comments?
On 2013/6/18 16:23, Yijing Wang wrote:
> Pci core has been saved pm cap register offset by pdev->pm_cap in pci_pm_init()
> in init path. So we can use pdev->pm_cap instead of using
> pci_find_capability(pdev, PCI_CAP_ID_PM) for better performance and simplified code.
>
> Signed-off-by: Yijing Wang <wangyijing@huawei.com>
> Cc: xjtuwjp@gmail.com
> Cc: lindar_liu@usish.com
> Cc: "James E.J. Bottomley" <JBottomley@parallels.com>
> Cc: linux-scsi@vger.kernel.org
> Cc: linux-kernel@vger.kernel.org
> ---
> drivers/scsi/pm8001/pm8001_init.c | 7 +++----
> 1 files changed, 3 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/scsi/pm8001/pm8001_init.c b/drivers/scsi/pm8001/pm8001_init.c
> index e4b9bc7..3861aa1 100644
> --- a/drivers/scsi/pm8001/pm8001_init.c
> +++ b/drivers/scsi/pm8001/pm8001_init.c
> @@ -912,14 +912,13 @@ static int pm8001_pci_suspend(struct pci_dev *pdev, pm_message_t state)
> {
> struct sas_ha_struct *sha = pci_get_drvdata(pdev);
> struct pm8001_hba_info *pm8001_ha;
> - int i , pos;
> + int i;
> u32 device_state;
> pm8001_ha = sha->lldd_ha;
> flush_workqueue(pm8001_wq);
> scsi_block_requests(pm8001_ha->shost);
> - pos = pci_find_capability(pdev, PCI_CAP_ID_PM);
> - if (pos == 0) {
> - printk(KERN_ERR " PCI PM not supported\n");
> + if (!pdev->pm_cap) {
> + dev_err(&pdev->dev, " PCI PM not supported\n");
> return -ENODEV;
> }
> PM8001_CHIP_DISP->interrupt_disable(pm8001_ha, 0xFF);
>
--
Thanks!
Yijing
^ permalink raw reply [flat|nested] 6+ messages in thread* Re: [PATCH 8/9] scsi/pm8001: use pdev->pm_cap instead of pci_find_capability(..,PCI_CAP_ID_PM)
2013-06-18 8:23 [PATCH 8/9] scsi/pm8001: use pdev->pm_cap instead of pci_find_capability(..,PCI_CAP_ID_PM) Yijing Wang
2013-06-18 9:25 ` lindar_liu
2013-06-25 12:07 ` Yijing Wang
@ 2013-06-26 9:33 ` Jack Wang
2013-06-26 9:46 ` Yijing Wang
2 siblings, 1 reply; 6+ messages in thread
From: Jack Wang @ 2013-06-26 9:33 UTC (permalink / raw)
To: Yijing Wang
Cc: James E.J. Bottomley, linux-kernel, Hanjun Guo, jiang.liu,
lindar_liu, linux-scsi
On 06/18/2013 10:23 AM, Yijing Wang wrote:
> Pci core has been saved pm cap register offset by pdev->pm_cap in pci_pm_init()
> in init path. So we can use pdev->pm_cap instead of using
> pci_find_capability(pdev, PCI_CAP_ID_PM) for better performance and simplified code.
>
I think Lindar already replied to you, and tested it on hardware.
So you can add her:
Acked-by or Tested-by
Regards,
Jack
> Signed-off-by: Yijing Wang <wangyijing@huawei.com>
> Cc: xjtuwjp@gmail.com
> Cc: lindar_liu@usish.com
> Cc: "James E.J. Bottomley" <JBottomley@parallels.com>
> Cc: linux-scsi@vger.kernel.org
> Cc: linux-kernel@vger.kernel.org
> ---
> drivers/scsi/pm8001/pm8001_init.c | 7 +++----
> 1 files changed, 3 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/scsi/pm8001/pm8001_init.c b/drivers/scsi/pm8001/pm8001_init.c
> index e4b9bc7..3861aa1 100644
> --- a/drivers/scsi/pm8001/pm8001_init.c
> +++ b/drivers/scsi/pm8001/pm8001_init.c
> @@ -912,14 +912,13 @@ static int pm8001_pci_suspend(struct pci_dev *pdev, pm_message_t state)
> {
> struct sas_ha_struct *sha = pci_get_drvdata(pdev);
> struct pm8001_hba_info *pm8001_ha;
> - int i , pos;
> + int i;
> u32 device_state;
> pm8001_ha = sha->lldd_ha;
> flush_workqueue(pm8001_wq);
> scsi_block_requests(pm8001_ha->shost);
> - pos = pci_find_capability(pdev, PCI_CAP_ID_PM);
> - if (pos == 0) {
> - printk(KERN_ERR " PCI PM not supported\n");
> + if (!pdev->pm_cap) {
> + dev_err(&pdev->dev, " PCI PM not supported\n");
> return -ENODEV;
> }
> PM8001_CHIP_DISP->interrupt_disable(pm8001_ha, 0xFF);
>
^ permalink raw reply [flat|nested] 6+ messages in thread* Re: [PATCH 8/9] scsi/pm8001: use pdev->pm_cap instead of pci_find_capability(..,PCI_CAP_ID_PM)
2013-06-26 9:33 ` Jack Wang
@ 2013-06-26 9:46 ` Yijing Wang
0 siblings, 0 replies; 6+ messages in thread
From: Yijing Wang @ 2013-06-26 9:46 UTC (permalink / raw)
To: Jack Wang
Cc: James E.J. Bottomley, linux-kernel, Hanjun Guo, jiang.liu,
lindar_liu, linux-scsi
On 2013/6/26 17:33, Jack Wang wrote:
> On 06/18/2013 10:23 AM, Yijing Wang wrote:
>> Pci core has been saved pm cap register offset by pdev->pm_cap in pci_pm_init()
>> in init path. So we can use pdev->pm_cap instead of using
>> pci_find_capability(pdev, PCI_CAP_ID_PM) for better performance and simplified code.
>>
> I think Lindar already replied to you, and tested it on hardware.
I didn't receive the reply, I will check my email client, maybe I lose some emails.
Jack, Lindar thank you very much.
>
> So you can add her:
> Acked-by or Tested-by
ok, I will add them.
>
>
> Regards,
> Jack
>> Signed-off-by: Yijing Wang <wangyijing@huawei.com>
>> Cc: xjtuwjp@gmail.com
>> Cc: lindar_liu@usish.com
>> Cc: "James E.J. Bottomley" <JBottomley@parallels.com>
>> Cc: linux-scsi@vger.kernel.org
>> Cc: linux-kernel@vger.kernel.org
>> ---
>> drivers/scsi/pm8001/pm8001_init.c | 7 +++----
>> 1 files changed, 3 insertions(+), 4 deletions(-)
>>
>> diff --git a/drivers/scsi/pm8001/pm8001_init.c b/drivers/scsi/pm8001/pm8001_init.c
>> index e4b9bc7..3861aa1 100644
>> --- a/drivers/scsi/pm8001/pm8001_init.c
>> +++ b/drivers/scsi/pm8001/pm8001_init.c
>> @@ -912,14 +912,13 @@ static int pm8001_pci_suspend(struct pci_dev *pdev, pm_message_t state)
>> {
>> struct sas_ha_struct *sha = pci_get_drvdata(pdev);
>> struct pm8001_hba_info *pm8001_ha;
>> - int i , pos;
>> + int i;
>> u32 device_state;
>> pm8001_ha = sha->lldd_ha;
>> flush_workqueue(pm8001_wq);
>> scsi_block_requests(pm8001_ha->shost);
>> - pos = pci_find_capability(pdev, PCI_CAP_ID_PM);
>> - if (pos == 0) {
>> - printk(KERN_ERR " PCI PM not supported\n");
>> + if (!pdev->pm_cap) {
>> + dev_err(&pdev->dev, " PCI PM not supported\n");
>> return -ENODEV;
>> }
>> PM8001_CHIP_DISP->interrupt_disable(pm8001_ha, 0xFF);
>>
>
>
> .
>
--
Thanks!
Yijing
^ permalink raw reply [flat|nested] 6+ messages in thread
* [PATCH 8/9] scsi/pm8001: use pdev->pm_cap instead of pci_find_capability(..,PCI_CAP_ID_PM)
@ 2013-06-26 1:13 Yijing Wang
0 siblings, 0 replies; 6+ messages in thread
From: Yijing Wang @ 2013-06-26 1:13 UTC (permalink / raw)
To: Andrew Morton
Cc: linux-kernel, Yijing Wang, xjtuwjp, lindar_liu,
James E.J. Bottomley, linux-scsi
Pci core has been saved pm cap register offset by pdev->pm_cap in pci_pm_init()
in init path. So we can use pdev->pm_cap instead of using
pci_find_capability(pdev, PCI_CAP_ID_PM) for better performance and simplified code.
Signed-off-by: Yijing Wang <wangyijing@huawei.com>
Cc: xjtuwjp@gmail.com
Cc: lindar_liu@usish.com
Cc: "James E.J. Bottomley" <JBottomley@parallels.com>
Cc: linux-scsi@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
---
drivers/scsi/pm8001/pm8001_init.c | 7 +++----
1 files changed, 3 insertions(+), 4 deletions(-)
diff --git a/drivers/scsi/pm8001/pm8001_init.c b/drivers/scsi/pm8001/pm8001_init.c
index e4b9bc7..3861aa1 100644
--- a/drivers/scsi/pm8001/pm8001_init.c
+++ b/drivers/scsi/pm8001/pm8001_init.c
@@ -912,14 +912,13 @@ static int pm8001_pci_suspend(struct pci_dev *pdev, pm_message_t state)
{
struct sas_ha_struct *sha = pci_get_drvdata(pdev);
struct pm8001_hba_info *pm8001_ha;
- int i , pos;
+ int i;
u32 device_state;
pm8001_ha = sha->lldd_ha;
flush_workqueue(pm8001_wq);
scsi_block_requests(pm8001_ha->shost);
- pos = pci_find_capability(pdev, PCI_CAP_ID_PM);
- if (pos == 0) {
- printk(KERN_ERR " PCI PM not supported\n");
+ if (!pdev->pm_cap) {
+ dev_err(&pdev->dev, " PCI PM not supported\n");
return -ENODEV;
}
PM8001_CHIP_DISP->interrupt_disable(pm8001_ha, 0xFF);
--
1.7.1
^ permalink raw reply related [flat|nested] 6+ messages in thread
end of thread, other threads:[~2013-06-26 9:46 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2013-06-18 8:23 [PATCH 8/9] scsi/pm8001: use pdev->pm_cap instead of pci_find_capability(..,PCI_CAP_ID_PM) Yijing Wang
2013-06-18 9:25 ` lindar_liu
2013-06-25 12:07 ` Yijing Wang
2013-06-26 9:33 ` Jack Wang
2013-06-26 9:46 ` Yijing Wang
-- strict thread matches above, loose matches on Subject: below --
2013-06-26 1:13 Yijing Wang
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).