From: Subhash Jadavani <subhashj@codeaurora.org>
To: Seungwon Jeon <tgih.jun@samsung.com>
Cc: linux-scsi@vger.kernel.org,
'Vinayak Holikatti' <vinholikatti@gmail.com>,
'Santosh Y' <santoshsy@gmail.com>,
"'James E.J. Bottomley'" <JBottomley@parallels.com>
Subject: Re: [PATCH 5/7] scsi: ufs: add unipro attribute IDs
Date: Mon, 29 Jul 2013 14:56:27 +0530 [thread overview]
Message-ID: <51F63543.6040309@codeaurora.org> (raw)
In-Reply-To: <002001ce8a06$c36f4810$4a4dd830$%jun@samsung.com>
Looks good to me.
Reviewed-by: Subhash Jadavani <subhashj@codeaurora.org>
On 7/26/2013 7:18 PM, Seungwon Jeon wrote:
> 'drivers/scsi/ufs/unipro.h' is added.
> Attributes in the layers of the UNIPRO stack can be
> read and written via the DME.
>
> Signed-off-by: Seungwon Jeon <tgih.jun@samsung.com>
> ---
> drivers/scsi/ufs/unipro.h | 130 +++++++++++++++++++++++++++++++++++++++++++++
> 1 files changed, 130 insertions(+), 0 deletions(-)
> create mode 100644 drivers/scsi/ufs/unipro.h
>
> diff --git a/drivers/scsi/ufs/unipro.h b/drivers/scsi/ufs/unipro.h
> new file mode 100644
> index 0000000..3a710eb
> --- /dev/null
> +++ b/drivers/scsi/ufs/unipro.h
> @@ -0,0 +1,130 @@
> +/*
> + * drivers/scsi/ufs/unipro.h
> + *
> + * Copyright (C) 2013 Samsung Electronics Co., Ltd.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + */
> +
> +#ifndef _UNIPRO_H_
> +#define _UNIPRO_H_
> +
> +/*
> + * PHY Adpater attributes
> + */
> +#define PA_ACTIVETXDATALANES 0x1560
> +#define PA_ACTIVERXDATALANES 0x1580
> +#define PA_TXTRAILINGCLOCKS 0x1564
> +#define PA_PHY_TYPE 0x1500
> +#define PA_AVAILTXDATALANES 0x1520
> +#define PA_AVAILRXDATALANES 0x1540
> +#define PA_MINRXTRAILINGCLOCKS 0x1543
> +#define PA_TXPWRSTATUS 0x1567
> +#define PA_RXPWRSTATUS 0x1582
> +#define PA_TXFORCECLOCK 0x1562
> +#define PA_TXPWRMODE 0x1563
> +#define PA_LEGACYDPHYESCDL 0x1570
> +#define PA_MAXTXSPEEDFAST 0x1521
> +#define PA_MAXTXSPEEDSLOW 0x1522
> +#define PA_MAXRXSPEEDFAST 0x1541
> +#define PA_MAXRXSPEEDSLOW 0x1542
> +#define PA_TXLINKSTARTUPHS 0x1544
> +#define PA_TXSPEEDFAST 0x1565
> +#define PA_TXSPEEDSLOW 0x1566
> +#define PA_REMOTEVERINFO 0x15A0
> +#define PA_TXGEAR 0x1568
> +#define PA_TXTERMINATION 0x1569
> +#define PA_HSSERIES 0x156A
> +#define PA_PWRMODE 0x1571
> +#define PA_RXGEAR 0x1583
> +#define PA_RXTERMINATION 0x1584
> +#define PA_MAXRXPWMGEAR 0x1586
> +#define PA_MAXRXHSGEAR 0x1587
> +#define PA_RXHSUNTERMCAP 0x15A5
> +#define PA_RXLSTERMCAP 0x15A6
> +#define PA_PACPREQTIMEOUT 0x1590
> +#define PA_PACPREQEOBTIMEOUT 0x1591
> +#define PA_HIBERN8TIME 0x15A7
> +#define PA_LOCALVERINFO 0x15A9
> +#define PA_TACTIVATE 0x15A8
> +#define PA_PACPFRAMECOUNT 0x15C0
> +#define PA_PACPERRORCOUNT 0x15C1
> +#define PA_PHYTESTCONTROL 0x15C2
> +#define PA_PWRMODEUSERDATA0 0x15B0
> +#define PA_PWRMODEUSERDATA1 0x15B1
> +#define PA_PWRMODEUSERDATA2 0x15B2
> +#define PA_PWRMODEUSERDATA3 0x15B3
> +#define PA_PWRMODEUSERDATA4 0x15B4
> +#define PA_PWRMODEUSERDATA5 0x15B5
> +#define PA_PWRMODEUSERDATA6 0x15B6
> +#define PA_PWRMODEUSERDATA7 0x15B7
> +#define PA_PWRMODEUSERDATA8 0x15B8
> +#define PA_PWRMODEUSERDATA9 0x15B9
> +#define PA_PWRMODEUSERDATA10 0x15BA
> +#define PA_PWRMODEUSERDATA11 0x15BB
> +#define PA_CONNECTEDTXDATALANES 0x1561
> +#define PA_CONNECTEDRXDATALANES 0x1581
> +#define PA_LOGICALLANEMAP 0x15A1
> +#define PA_SLEEPNOCONFIGTIME 0x15A2
> +#define PA_STALLNOCONFIGTIME 0x15A3
> +#define PA_SAVECONFIGTIME 0x15A4
> +
> +/*
> + * Data Link Layer Attributes
> + */
> +#define DL_TC0TXFCTHRESHOLD 0x2040
> +#define DL_FC0PROTTIMEOUTVAL 0x2041
> +#define DL_TC0REPLAYTIMEOUTVAL 0x2042
> +#define DL_AFC0REQTIMEOUTVAL 0x2043
> +#define DL_AFC0CREDITTHRESHOLD 0x2044
> +#define DL_TC0OUTACKTHRESHOLD 0x2045
> +#define DL_TC1TXFCTHRESHOLD 0x2060
> +#define DL_FC1PROTTIMEOUTVAL 0x2061
> +#define DL_TC1REPLAYTIMEOUTVAL 0x2062
> +#define DL_AFC1REQTIMEOUTVAL 0x2063
> +#define DL_AFC1CREDITTHRESHOLD 0x2064
> +#define DL_TC1OUTACKTHRESHOLD 0x2065
> +#define DL_TXPREEMPTIONCAP 0x2000
> +#define DL_TC0TXMAXSDUSIZE 0x2001
> +#define DL_TC0RXINITCREDITVAL 0x2002
> +#define DL_TC0TXBUFFERSIZE 0x2005
> +#define DL_PEERTC0PRESENT 0x2046
> +#define DL_PEERTC0RXINITCREVAL 0x2047
> +#define DL_TC1TXMAXSDUSIZE 0x2003
> +#define DL_TC1RXINITCREDITVAL 0x2004
> +#define DL_TC1TXBUFFERSIZE 0x2006
> +#define DL_PEERTC1PRESENT 0x2066
> +#define DL_PEERTC1RXINITCREVAL 0x2067
> +
> +/*
> + * Network Layer Attributes
> + */
> +#define N_DEVICEID 0x3000
> +#define N_DEVICEID_VALID 0x3001
> +#define N_TC0TXMAXSDUSIZE 0x3020
> +#define N_TC1TXMAXSDUSIZE 0x3021
> +
> +/*
> + * Transport Layer Attributes
> + */
> +#define T_NUMCPORTS 0x4000
> +#define T_NUMTESTFEATURES 0x4001
> +#define T_CONNECTIONSTATE 0x4020
> +#define T_PEERDEVICEID 0x4021
> +#define T_PEERCPORTID 0x4022
> +#define T_TRAFFICCLASS 0x4023
> +#define T_PROTOCOLID 0x4024
> +#define T_CPORTFLAGS 0x4025
> +#define T_TXTOKENVALUE 0x4026
> +#define T_RXTOKENVALUE 0x4027
> +#define T_LOCALBUFFERSPACE 0x4028
> +#define T_PEERBUFFERSPACE 0x4029
> +#define T_CREDITSTOSEND 0x402A
> +#define T_CPORTMODE 0x402B
> +#define T_TC0TXMAXSDUSIZE 0x4060
> +#define T_TC1TXMAXSDUSIZE 0x4061
> +
> +#endif /* _UNIPRO_H_ */
next prev parent reply other threads:[~2013-07-29 9:26 UTC|newest]
Thread overview: 72+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-07-20 0:41 [PATCH v2 0/3] ufs: fix bugs in probing and removing driver paths Akinobu Mita
2013-07-20 0:41 ` [PATCH v2 1/3] ufshcd-pci: release ioremapped region during removing driver Akinobu Mita
2013-07-26 13:45 ` [PATCH 1/7] scsi: ufs: amend the ocs handling with fatal error Seungwon Jeon
2013-07-29 6:17 ` Subhash Jadavani
2013-07-29 10:05 ` Seungwon Jeon
2013-07-29 10:27 ` Subhash Jadavani
2013-07-29 10:51 ` Sujit Reddy Thumma
2013-07-30 13:02 ` Seungwon Jeon
2013-08-12 7:17 ` Subhash Jadavani
2013-08-13 11:50 ` Seungwon Jeon
2013-08-13 13:39 ` Subhash Jadavani
2013-07-29 18:03 ` Santosh Y
2013-07-20 0:41 ` [PATCH v2 2/3] ufs: don't disable_irq() if the IRQ can be shared among devices Akinobu Mita
2013-07-26 13:44 ` [PATCH 0/7] scsi: ufs: some fixes and updates Seungwon Jeon
2013-08-23 13:00 ` [PATCH v2 0/6] " Seungwon Jeon
2013-08-25 11:23 ` Dolev Raviv
2013-08-26 14:40 ` [PATCH v3 " Seungwon Jeon
2013-08-28 10:46 ` Subhash Jadavani
2013-07-20 0:41 ` [PATCH v2 3/3] ufs: don't stop controller before scsi_remove_host() Akinobu Mita
2013-07-26 13:46 ` [PATCH 2/7] scsi: ufs: find out sense data over scsi status values Seungwon Jeon
2013-07-29 6:35 ` Subhash Jadavani
2013-07-30 13:00 ` Seungwon Jeon
2013-07-29 10:51 ` Sujit Reddy Thumma
2013-07-30 13:03 ` Seungwon Jeon
2013-07-30 3:53 ` Santosh Y
2013-07-30 13:03 ` Seungwon Jeon
2013-07-31 0:15 ` Elliott, Robert (Server Storage)
2013-08-06 12:08 ` Seungwon Jeon
2013-08-23 13:00 ` [PATCH v2 1/6] " Seungwon Jeon
2013-08-23 13:00 ` [PATCH v2 2/6] scsi: ufs: fix the setting interrupt aggregation counter Seungwon Jeon
2013-08-23 13:00 ` [PATCH v2 3/6] scsi: ufs: add dme configuration primitives Seungwon Jeon
2013-08-23 13:00 ` [PATCH v2 4/6] scsi: ufs: add unipro attribute IDs Seungwon Jeon
2013-08-23 13:00 ` [PATCH v2 5/6] scsi: ufs: add operation for the uic power mode change Seungwon Jeon
2013-08-23 13:00 ` [PATCH v2 6/6] scsi: ufs: configure the attribute for power mode Seungwon Jeon
2013-08-26 14:40 ` [PATCH v3 1/6] scsi: ufs: find out sense data over scsi status values Seungwon Jeon
2013-08-27 8:53 ` Subhash Jadavani
2013-08-28 12:43 ` Yaniv Gardi
2013-08-26 14:40 ` [PATCH v3 2/6] scsi: ufs: fix the setting interrupt aggregation counter Seungwon Jeon
2013-08-27 9:01 ` Subhash Jadavani
2013-08-28 12:43 ` Yaniv Gardi
2013-08-26 14:40 ` [PATCH v3 3/6] scsi: ufs: add dme configuration primitives Seungwon Jeon
2013-08-27 9:15 ` Subhash Jadavani
2013-08-28 12:44 ` Yaniv Gardi
2013-08-26 14:40 ` [PATCH v3 4/6] scsi: ufs: add unipro attribute IDs Seungwon Jeon
2013-08-27 9:14 ` Subhash Jadavani
2013-08-28 12:46 ` Yaniv Gardi
2013-08-26 14:40 ` [PATCH v3 5/6] scsi: ufs: add operation for the uic power mode change Seungwon Jeon
2013-08-27 9:53 ` Subhash Jadavani
2013-08-27 11:28 ` Seungwon Jeon
2013-08-27 11:47 ` Subhash Jadavani
2013-08-27 11:58 ` Seungwon Jeon
2013-08-28 12:45 ` Yaniv Gardi
2013-08-26 14:41 ` [PATCH v3 6/6] scsi: ufs: configure the attribute for power mode Seungwon Jeon
2013-08-27 10:21 ` Subhash Jadavani
2013-08-27 10:27 ` Subhash Jadavani
2013-09-09 11:51 ` [PATCH] scsi: ufs: export the helper functions for vender probe/remove Seungwon Jeon
2013-07-26 13:46 ` [PATCH 3/7] scsi: ufs: fix the setting interrupt aggregation counter Seungwon Jeon
2013-07-29 7:03 ` Subhash Jadavani
2013-07-30 13:01 ` Seungwon Jeon
2013-07-26 13:47 ` [PATCH 4/7] scsi: ufs: add dme configuration primitives Seungwon Jeon
2013-07-29 9:24 ` Subhash Jadavani
2013-07-30 13:02 ` Seungwon Jeon
2013-08-13 6:56 ` Subhash Jadavani
2013-07-26 13:48 ` [PATCH 5/7] scsi: ufs: add unipro attribute IDs Seungwon Jeon
2013-07-29 9:26 ` Subhash Jadavani [this message]
2013-07-26 13:48 ` [PATCH 6/7] scsi: ufs: add operation for the uic power mode change Seungwon Jeon
2013-07-29 9:53 ` Subhash Jadavani
2013-07-30 13:02 ` Seungwon Jeon
2013-07-26 13:49 ` [PATCH 7/7] scsi: ufs: configure the attribute for power mode Seungwon Jeon
2013-07-31 13:28 ` Subhash Jadavani
2013-08-06 12:08 ` Seungwon Jeon
2013-08-13 7:00 ` Subhash Jadavani
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=51F63543.6040309@codeaurora.org \
--to=subhashj@codeaurora.org \
--cc=JBottomley@parallels.com \
--cc=linux-scsi@vger.kernel.org \
--cc=santoshsy@gmail.com \
--cc=tgih.jun@samsung.com \
--cc=vinholikatti@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).