From: Jack Wang <xjtuwjp@gmail.com>
To: Anand <anandkumar_santhanam@pmc-sierra.com>
Cc: linux-scsi@vger.kernel.org, Viswas.G@pmcs.com,
Sangeetha.Gnanasekaran@pmcs.com, Nikith.Ganigarakoppal@pmcs.com
Subject: Re: [PATCH 2/5] pm80xx: IButton feature support and Indirect SMP fix.
Date: Mon, 16 Sep 2013 18:04:32 +0200 [thread overview]
Message-ID: <52372C10.3000304@gmail.com> (raw)
In-Reply-To: <5237298E.5050701@pmc-sierra.com>
On 09/16/2013 05:53 PM, Anand wrote:
> From db345f70bef0b07655d887f2d0398faf666f4a48 Mon Sep 17 00:00:00 2001
> From: Anand Kumar Santhanam <AnandKumar.Santhanam@pmcs.com>
> Date: Tue, 3 Sep 2013 15:21:29 +0530
> Subject: [PATCH 2/5] pm80xx: IButton feature support and Indirect SMP fix.
>
> IButton security feature support for motherboard controllers.
> Fix for indirect data transfer mode in case of SMP request.
>
You'd better split this into two patches for bisect-able.
Jack
> Signed-off-by: Anandkumar.Santhanam@pmcs.com
>
> ---
> drivers/scsi/pm8001/pm80xx_hwi.c | 26 ++++++++++++++++++++++----
> 1 files changed, 22 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/scsi/pm8001/pm80xx_hwi.c b/drivers/scsi/pm8001/pm80xx_hwi.c
> index be0b394..158e91d 100644
> --- a/drivers/scsi/pm8001/pm80xx_hwi.c
> +++ b/drivers/scsi/pm8001/pm80xx_hwi.c
> @@ -967,6 +967,7 @@ pm80xx_chip_soft_rst(struct pm8001_hba_info *pm8001_ha)
> {
> u32 regval;
> u32 bootloader_state;
> + u32 ibutton0, ibutton1;
>
> /* Check if MPI is in ready state to reset */
> if (mpi_uninit_check(pm8001_ha) != 0) {
> @@ -1025,7 +1026,26 @@ pm80xx_chip_soft_rst(struct pm8001_hba_info *pm8001_ha)
> if (-1 == check_fw_ready(pm8001_ha)) {
> PM8001_FAIL_DBG(pm8001_ha,
> pm8001_printk("Firmware is not ready!\n"));
> - return -EBUSY;
> + /* check iButton feature support for motherboard controller */
> + if (pm8001_ha->pdev->subsystem_vendor !=
> + PCI_VENDOR_ID_ADAPTEC2) {
> + ibutton0 = pm8001_cr32(pm8001_ha, 0,
> + MSGU_HOST_SCRATCH_PAD_6);
> + ibutton1 = pm8001_cr32(pm8001_ha, 0,
> + MSGU_HOST_SCRATCH_PAD_7);
> + if (!ibutton0 && !ibutton1) {
> + PM8001_FAIL_DBG(pm8001_ha,
> + pm8001_printk("iButton Feature is"
> + " not Available!!!\n"));
> + return -EBUSY;
> + }
> + if (ibutton0 == 0xdeadbeef && ibutton1 == 0xdeadbeef) {
> + PM8001_FAIL_DBG(pm8001_ha,
> + pm8001_printk("CRC Check for iButton"
> + " Feature Failed!!!\n"));
> + return -EBUSY;
> + }
> + }
> }
> PM8001_INIT_DBG(pm8001_ha,
> pm8001_printk("SPCv soft reset Complete\n"));
> @@ -3492,8 +3512,6 @@ static int pm80xx_chip_smp_req(struct pm8001_hba_info *pm8001_ha,
> else
> pm8001_ha->smp_exp_mode = SMP_INDIRECT;
>
> - /* DIRECT MODE support only in spcv/ve */
> - pm8001_ha->smp_exp_mode = SMP_DIRECT;
>
> tmp_addr = cpu_to_le64((u64)sg_dma_address(&task->smp_task.smp_req));
> preq_dma_addr = (char *)phys_to_virt(tmp_addr);
> @@ -3509,7 +3527,7 @@ static int pm80xx_chip_smp_req(struct pm8001_hba_info *pm8001_ha,
> /* exclude top 4 bytes for SMP req header */
> smp_cmd.long_smp_req.long_req_addr =
> cpu_to_le64((u64)sg_dma_address
> - (&task->smp_task.smp_req) - 4);
> + (&task->smp_task.smp_req) + 4);
> /* exclude 4 bytes for SMP req header and CRC */
> smp_cmd.long_smp_req.long_req_size =
> cpu_to_le32((u32)sg_dma_len(&task->smp_task.smp_req)-8);
>
prev parent reply other threads:[~2013-09-16 16:03 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-09-16 15:53 [PATCH 2/5] pm80xx: IButton feature support and Indirect SMP fix Anand
2013-09-16 16:04 ` Jack Wang [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=52372C10.3000304@gmail.com \
--to=xjtuwjp@gmail.com \
--cc=Nikith.Ganigarakoppal@pmcs.com \
--cc=Sangeetha.Gnanasekaran@pmcs.com \
--cc=Viswas.G@pmcs.com \
--cc=anandkumar_santhanam@pmc-sierra.com \
--cc=linux-scsi@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).