From: Anand <anandkumar_santhanam@pmc-sierra.com>
To: linux-scsi@vger.kernel.org
Cc: Sangeetha.Gnanasekaran@pmcs.com, Nikith.Ganigarakoppal@pmcs.com,
Viswas.G@pmcs.com, xjtuwjp@gmail.com
Subject: [PATCH V2 05/10] pm80xx: Phy settings support for motherboard controller.
Date: Wed, 25 Sep 2013 22:34:21 -0700 [thread overview]
Message-ID: <5243C75D.3060606@pmc-sierra.com> (raw)
>From 555a706d7ce0bf8c7a36b5ef11a41ddb44377dc2 Mon Sep 17 00:00:00 2001
From: Anand Kumar Santhanam <AnandKumar.Santhanam@pmcs.com>
Date: Wed, 18 Sep 2013 13:02:44 +0530
Subject: [PATCH V2 05/10] pm80xx: Phy settings support for motherboard controller.
Phy profile implementation to support phy settings feature
for motherboard controllers.
Signed-off-by: Anandkumar.Santhanam@pmcs.com
---
drivers/scsi/pm8001/pm8001_hwi.c | 10 ++++++
drivers/scsi/pm8001/pm8001_init.c | 28 +++++++++++++++++
drivers/scsi/pm8001/pm8001_sas.h | 3 +-
drivers/scsi/pm8001/pm80xx_hwi.c | 61 +++++++++++++++++++++++++++++++++++-
drivers/scsi/pm8001/pm80xx_hwi.h | 4 ++
5 files changed, 103 insertions(+), 3 deletions(-)
diff --git a/drivers/scsi/pm8001/pm8001_hwi.c b/drivers/scsi/pm8001/pm8001_hwi.c
index 4a21957..2fd8c38 100644
--- a/drivers/scsi/pm8001/pm8001_hwi.c
+++ b/drivers/scsi/pm8001/pm8001_hwi.c
@@ -4778,6 +4778,16 @@ int pm8001_chip_get_nvmd_req(struct pm8001_hba_info *pm8001_ha,
cpu_to_le32(pm8001_ha->memoryMap.region[NVMD].phys_addr_lo);
break;
}
+ case IOP_RDUMP: {
+ nvmd_req.len_ir_vpdd = cpu_to_le32(IPMode | IOP_RDUMP);
+ nvmd_req.resp_len = cpu_to_le32(ioctl_payload->length);
+ nvmd_req.vpd_offset = cpu_to_le32(ioctl_payload->offset);
+ nvmd_req.resp_addr_hi =
+ cpu_to_le32(pm8001_ha->memoryMap.region[NVMD].phys_addr_hi);
+ nvmd_req.resp_addr_lo =
+ cpu_to_le32(pm8001_ha->memoryMap.region[NVMD].phys_addr_lo);
+ break;
+ }
default:
break;
}
diff --git a/drivers/scsi/pm8001/pm8001_init.c b/drivers/scsi/pm8001/pm8001_init.c
index a862fd1..b31d25a 100644
--- a/drivers/scsi/pm8001/pm8001_init.c
+++ b/drivers/scsi/pm8001/pm8001_init.c
@@ -667,6 +667,31 @@ static void pm8001_init_sas_add(struct pm8001_hba_info *pm8001_ha)
#endif
}
+/*
+ * pm8001_get_phy_settings_info : Read phy setting values.
+ * @pm8001_ha : our hba.
+ */
+void pm8001_get_phy_settings_info(struct pm8001_hba_info *pm8001_ha)
+{
+
+#ifdef PM8001_READ_VPD
+ /*OPTION ROM FLASH read for the SPC cards */
+ DECLARE_COMPLETION_ONSTACK(completion);
+ struct pm8001_ioctl_payload payload;
+
+ pm8001_ha->nvmd_completion = &completion;
+ /* SAS ADDRESS read from flash / EEPROM */
+ payload.minor_function = 6;
+ payload.offset = 0;
+ payload.length = 4096;
+ payload.func_specific = kzalloc(4096, GFP_KERNEL);
+ /* Read phy setting values from flash */
+ PM8001_CHIP_DISP->get_nvmd_req(pm8001_ha, &payload);
+ wait_for_completion(&completion);
+ pm8001_set_phy_profile(pm8001_ha, sizeof(u8), payload.func_specific);
+#endif
+}
+
#ifdef PM8001_USE_MSIX
/**
* pm8001_setup_msix - enable MSI-X interrupt
@@ -847,6 +872,9 @@ static int pm8001_pci_probe(struct pci_dev *pdev,
}
pm8001_init_sas_add(pm8001_ha);
+ /* phy setting support for motherboard controller */
+ if (pdev->subsystem_vendor != PCI_VENDOR_ID_ADAPTEC2)
+ pm8001_get_phy_settings_info(pm8001_ha);
pm8001_post_sas_ha_init(shost, chip);
rc = sas_register_ha(SHOST_TO_SAS_HA(shost));
if (rc)
diff --git a/drivers/scsi/pm8001/pm8001_sas.h b/drivers/scsi/pm8001/pm8001_sas.h
index 68e1147..cbde11a 100644
--- a/drivers/scsi/pm8001/pm8001_sas.h
+++ b/drivers/scsi/pm8001/pm8001_sas.h
@@ -632,7 +632,8 @@ struct pm8001_device *pm8001_find_dev(struct pm8001_hba_info *pm8001_ha,
int pm80xx_set_thermal_config(struct pm8001_hba_info *pm8001_ha);
int pm8001_bar4_shift(struct pm8001_hba_info *pm8001_ha, u32 shiftValue);
-
+void pm8001_set_phy_profile(struct pm8001_hba_info *pm8001_ha,
+ u32 length, u8 *buf);
/* ctl shared API */
extern struct device_attribute *pm8001_host_attrs[];
diff --git a/drivers/scsi/pm8001/pm80xx_hwi.c b/drivers/scsi/pm8001/pm80xx_hwi.c
index 99cec5f..e1ab320 100644
--- a/drivers/scsi/pm8001/pm80xx_hwi.c
+++ b/drivers/scsi/pm8001/pm80xx_hwi.c
@@ -3131,9 +3131,27 @@ static int mpi_flash_op_ext_resp(struct pm8001_hba_info *pm8001_ha, void *piomb)
static int mpi_set_phy_profile_resp(struct pm8001_hba_info *pm8001_ha,
void *piomb)
{
- PM8001_MSG_DBG(pm8001_ha,
- pm8001_printk(" pm80xx_addition_functionality\n"));
+ u8 page_code;
+ struct set_phy_profile_resp *pPayload =
+ (struct set_phy_profile_resp *)(piomb + 4);
+ u32 ppc_phyid = le32_to_cpu(pPayload->ppc_phyid);
+ u32 status = le32_to_cpu(pPayload->status);
+ page_code = (u8)((ppc_phyid & 0xFF00) >> 8);
+ if (status) {
+ /* status is FAILED */
+ PM8001_FAIL_DBG(pm8001_ha,
+ pm8001_printk("PhyProfile command failed with status "
+ "0x%08X \n", status));
+ return -1;
+ } else {
+ if (page_code != SAS_PHY_ANALOG_SETTINGS_PAGE) {
+ PM8001_FAIL_DBG(pm8001_ha,
+ pm8001_printk("Invalid page code 0x%X\n",
+ page_code));
+ return -1;
+ }
+ }
return 0;
}
@@ -4128,6 +4146,45 @@ pm80xx_chip_isr(struct pm8001_hba_info *pm8001_ha, u8 vec)
return IRQ_HANDLED;
}
+void mpi_set_phy_profile_req(struct pm8001_hba_info *pm8001_ha,
+ u32 operation, u32 phyid, u32 length, u32 *buf)
+{
+ u32 tag , i, j = 0;
+ int rc;
+ struct set_phy_profile_req payload;
+ struct inbound_queue_table *circularQ;
+ u32 opc = OPC_INB_SET_PHY_PROFILE;
+
+ memset(&payload, 0, sizeof(payload));
+ rc = pm8001_tag_alloc(pm8001_ha, &tag);
+ if (rc)
+ PM8001_FAIL_DBG(pm8001_ha, pm8001_printk("Invalid tag\n"));
+ circularQ = &pm8001_ha->inbnd_q_tbl[0];
+ payload.tag = cpu_to_le32(tag);
+ payload.ppc_phyid = (((operation & 0xF) << 8) | (phyid & 0xFF));
+ PM8001_INIT_DBG(pm8001_ha,
+ pm8001_printk(" phy profile command for phy %x ,length is %d\n",
+ payload.ppc_phyid, length));
+ for (i = length ; i < (length + PHY_DWORD_LENGTH - 1) ; i++) {
+ payload.reserved[j] = cpu_to_le32(*((u32 *)buf + i));
+ j++;
+ }
+ pm8001_mpi_build_cmd(pm8001_ha, circularQ, opc, &payload, 0);
+}
+
+void pm8001_set_phy_profile(struct pm8001_hba_info *pm8001_ha,
+ u32 length, u8 *buf)
+{
+ u32 page_code, i;
+
+ page_code = SAS_PHY_ANALOG_SETTINGS_PAGE;
+ for (i = 0 ; i < pm8001_ha->chip->n_phy ; i++) {
+ mpi_set_phy_profile_req(pm8001_ha,
+ SAS_PHY_ANALOG_SETTINGS_PAGE, i, length, (u32 *)buf);
+ length = length + PHY_DWORD_LENGTH;
+ }
+ PM8001_INIT_DBG(pm8001_ha, pm8001_printk("phy settings completed\n"));
+}
const struct pm8001_dispatch pm8001_80xx_dispatch = {
.name = "pmc80xx",
.chip_init = pm80xx_chip_init,
diff --git a/drivers/scsi/pm8001/pm80xx_hwi.h b/drivers/scsi/pm8001/pm80xx_hwi.h
index 9a9116d..872d5cf 100644
--- a/drivers/scsi/pm8001/pm80xx_hwi.h
+++ b/drivers/scsi/pm8001/pm80xx_hwi.h
@@ -170,6 +170,10 @@
#define LINKRATE_60 (0x06 << 8)
#define LINKRATE_120 (0x08 << 8)
+/* phy_profile */
+#define SAS_PHY_ANALOG_SETTINGS_PAGE 0x04
+#define PHY_DWORD_LENGTH 0xC
+
/* Thermal related */
#define THERMAL_ENABLE 0x1
#define THERMAL_LOG_ENABLE 0x1
--
1.7.1
next reply other threads:[~2013-09-26 5:31 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-09-26 5:34 Anand [this message]
2013-09-26 6:56 ` [PATCH V2 05/10] pm80xx: Phy settings support for motherboard controller Jack Wang
2013-09-26 9:04 ` Sangeetha Gnanasekaran
2013-09-26 9:12 ` Jack Wang
2013-09-26 9:16 ` Sangeetha Gnanasekaran
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5243C75D.3060606@pmc-sierra.com \
--to=anandkumar_santhanam@pmc-sierra.com \
--cc=Nikith.Ganigarakoppal@pmcs.com \
--cc=Sangeetha.Gnanasekaran@pmcs.com \
--cc=Viswas.G@pmcs.com \
--cc=linux-scsi@vger.kernel.org \
--cc=xjtuwjp@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox