* [PATCH V2 02/10] pm80xx: IButton feature support for motherboard controllers.
@ 2013-09-26 5:28 Anand
2013-09-26 6:42 ` Jack Wang
0 siblings, 1 reply; 2+ messages in thread
From: Anand @ 2013-09-26 5:28 UTC (permalink / raw)
To: linux-scsi
Cc: Sangeetha.Gnanasekaran, Nikith.Ganigarakoppal, Viswas.G, xjtuwjp
>From d6b5e5d88f424b334c9b9c241f988b9eec1a70c7 Mon Sep 17 00:00:00 2001
From: Anand Kumar Santhanam <AnandKumar.Santhanam@pmcs.com>
Date: Tue, 17 Sep 2013 14:32:20 +0530
Subject: [PATCH V2 02/10] pm80xx: IButton feature support for motherboard controllers.
IButton security feature support for motherboard controllers.
Signed-off-by: Anandkumar.Santhanam@pmcs.com
---
drivers/scsi/pm8001/pm80xx_hwi.c | 22 +++++++++++++++++++++-
1 files changed, 21 insertions(+), 1 deletions(-)
diff --git a/drivers/scsi/pm8001/pm80xx_hwi.c b/drivers/scsi/pm8001/pm80xx_hwi.c
index 8efac42..912dfec 100644
--- a/drivers/scsi/pm8001/pm80xx_hwi.c
+++ b/drivers/scsi/pm8001/pm80xx_hwi.c
@@ -967,6 +967,7 @@ pm80xx_chip_soft_rst(struct pm8001_hba_info *pm8001_ha)
{
u32 regval;
u32 bootloader_state;
+ u32 ibutton0, ibutton1;
/* Check if MPI is in ready state to reset */
if (mpi_uninit_check(pm8001_ha) != 0) {
@@ -1025,7 +1026,26 @@ pm80xx_chip_soft_rst(struct pm8001_hba_info *pm8001_ha)
if (-1 == check_fw_ready(pm8001_ha)) {
PM8001_FAIL_DBG(pm8001_ha,
pm8001_printk("Firmware is not ready!\n"));
- return -EBUSY;
+ /* check iButton feature support for motherboard controller */
+ if (pm8001_ha->pdev->subsystem_vendor !=
+ PCI_VENDOR_ID_ADAPTEC2) {
+ ibutton0 = pm8001_cr32(pm8001_ha, 0,
+ MSGU_HOST_SCRATCH_PAD_6);
+ ibutton1 = pm8001_cr32(pm8001_ha, 0,
+ MSGU_HOST_SCRATCH_PAD_7);
+ if (!ibutton0 && !ibutton1) {
+ PM8001_FAIL_DBG(pm8001_ha,
+ pm8001_printk("iButton Feature is"
+ " not Available!!!\n"));
+ return -EBUSY;
+ }
+ if (ibutton0 == 0xdeadbeef && ibutton1 == 0xdeadbeef) {
+ PM8001_FAIL_DBG(pm8001_ha,
+ pm8001_printk("CRC Check for iButton"
+ " Feature Failed!!!\n"));
+ return -EBUSY;
+ }
+ }
}
PM8001_INIT_DBG(pm8001_ha,
pm8001_printk("SPCv soft reset Complete\n"));
--
1.7.1
^ permalink raw reply related [flat|nested] 2+ messages in thread* Re: [PATCH V2 02/10] pm80xx: IButton feature support for motherboard controllers.
2013-09-26 5:28 [PATCH V2 02/10] pm80xx: IButton feature support for motherboard controllers Anand
@ 2013-09-26 6:42 ` Jack Wang
0 siblings, 0 replies; 2+ messages in thread
From: Jack Wang @ 2013-09-26 6:42 UTC (permalink / raw)
To: Anand; +Cc: linux-scsi, Sangeetha.Gnanasekaran, Nikith.Ganigarakoppal,
Viswas.G
On 09/26/2013 07:28 AM, Anand wrote:
> From d6b5e5d88f424b334c9b9c241f988b9eec1a70c7 Mon Sep 17 00:00:00 2001
> From: Anand Kumar Santhanam <AnandKumar.Santhanam@pmcs.com>
> Date: Tue, 17 Sep 2013 14:32:20 +0530
> Subject: [PATCH V2 02/10] pm80xx: IButton feature support for motherboard controllers.
>
> IButton security feature support for motherboard controllers.
>
> Signed-off-by: Anandkumar.Santhanam@pmcs.com
Reviewed-by: Jack Wang <jinpu.wang@profitbricks.com>
>
> ---
> drivers/scsi/pm8001/pm80xx_hwi.c | 22 +++++++++++++++++++++-
> 1 files changed, 21 insertions(+), 1 deletions(-)
>
> diff --git a/drivers/scsi/pm8001/pm80xx_hwi.c b/drivers/scsi/pm8001/pm80xx_hwi.c
> index 8efac42..912dfec 100644
> --- a/drivers/scsi/pm8001/pm80xx_hwi.c
> +++ b/drivers/scsi/pm8001/pm80xx_hwi.c
> @@ -967,6 +967,7 @@ pm80xx_chip_soft_rst(struct pm8001_hba_info *pm8001_ha)
> {
> u32 regval;
> u32 bootloader_state;
> + u32 ibutton0, ibutton1;
>
> /* Check if MPI is in ready state to reset */
> if (mpi_uninit_check(pm8001_ha) != 0) {
> @@ -1025,7 +1026,26 @@ pm80xx_chip_soft_rst(struct pm8001_hba_info *pm8001_ha)
> if (-1 == check_fw_ready(pm8001_ha)) {
> PM8001_FAIL_DBG(pm8001_ha,
> pm8001_printk("Firmware is not ready!\n"));
> - return -EBUSY;
> + /* check iButton feature support for motherboard controller */
> + if (pm8001_ha->pdev->subsystem_vendor !=
> + PCI_VENDOR_ID_ADAPTEC2) {
> + ibutton0 = pm8001_cr32(pm8001_ha, 0,
> + MSGU_HOST_SCRATCH_PAD_6);
> + ibutton1 = pm8001_cr32(pm8001_ha, 0,
> + MSGU_HOST_SCRATCH_PAD_7);
> + if (!ibutton0 && !ibutton1) {
> + PM8001_FAIL_DBG(pm8001_ha,
> + pm8001_printk("iButton Feature is"
> + " not Available!!!\n"));
> + return -EBUSY;
> + }
> + if (ibutton0 == 0xdeadbeef && ibutton1 == 0xdeadbeef) {
> + PM8001_FAIL_DBG(pm8001_ha,
> + pm8001_printk("CRC Check for iButton"
> + " Feature Failed!!!\n"));
> + return -EBUSY;
> + }
> + }
> }
> PM8001_INIT_DBG(pm8001_ha,
> pm8001_printk("SPCv soft reset Complete\n"));
>
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2013-09-26 6:41 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2013-09-26 5:28 [PATCH V2 02/10] pm80xx: IButton feature support for motherboard controllers Anand
2013-09-26 6:42 ` Jack Wang
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).