From: Jack Wang <xjtuwjp@gmail.com>
To: Anand <anandkumar_santhanam@pmc-sierra.com>
Cc: linux-scsi@vger.kernel.org, Sangeetha.Gnanasekaran@pmcs.com,
Nikith.Ganigarakoppal@pmcs.com, Viswas.G@pmcs.com
Subject: Re: [PATCH V2 08/10] pm80xx: Queue rotation logic for inbound and outbound queues
Date: Thu, 26 Sep 2013 09:08:02 +0200 [thread overview]
Message-ID: <5243DD52.7010304@gmail.com> (raw)
In-Reply-To: <5243C8D8.5090505@pmc-sierra.com>
On 09/26/2013 07:40 AM, Anand wrote:
> From 678d8085ace7c471dc140420c41dc4ad70300d60 Mon Sep 17 00:00:00 2001
> From: Anand Kumar Santhanam <AnandKumar.Santhanam@pmcs.com>
> Date: Wed, 18 Sep 2013 11:12:59 +0530
> Subject: [PATCH V2 08/10] pm80xx: Queue rotation logic for inbound and outbound queues.
>
> Signed-off-by: Anandkumar.Santhanam@pmcs.com
>
I'd like to know the number of this improved for performance?
Jack
> ---
> drivers/scsi/pm8001/pm80xx_hwi.c | 31 +++++++++++++------------------
> 1 files changed, 13 insertions(+), 18 deletions(-)
>
> diff --git a/drivers/scsi/pm8001/pm80xx_hwi.c b/drivers/scsi/pm8001/pm80xx_hwi.c
> index 80a10aa..ce59d0d 100644
> --- a/drivers/scsi/pm8001/pm80xx_hwi.c
> +++ b/drivers/scsi/pm8001/pm80xx_hwi.c
> @@ -3715,8 +3715,7 @@ static int pm80xx_chip_ssp_io_req(struct pm8001_hba_info *pm8001_ha,
> int ret;
> u64 phys_addr;
> struct inbound_queue_table *circularQ;
> - static u32 inb;
> - static u32 outb;
> + u32 q_index;
> u32 opc = OPC_INB_SSPINIIOSTART;
> memset(&ssp_cmd, 0, sizeof(ssp_cmd));
> memcpy(ssp_cmd.ssp_iu.lun, task->ssp_task.LUN, 8);
> @@ -3735,7 +3734,8 @@ static int pm80xx_chip_ssp_io_req(struct pm8001_hba_info *pm8001_ha,
> ssp_cmd.ssp_iu.efb_prio_attr |= (task->ssp_task.task_attr & 7);
> memcpy(ssp_cmd.ssp_iu.cdb, task->ssp_task.cmd->cmnd,
> task->ssp_task.cmd->cmd_len);
> - circularQ = &pm8001_ha->inbnd_q_tbl[0];
> + q_index = (u32) (pm8001_dev->id & 0x00ffffff) % PM8001_MAX_INB_NUM;
> + circularQ = &pm8001_ha->inbnd_q_tbl[q_index];
>
> /* Check if encryption is set */
> if (pm8001_ha->chip->encrypt &&
> @@ -3783,7 +3783,7 @@ static int pm80xx_chip_ssp_io_req(struct pm8001_hba_info *pm8001_ha,
> } else {
> PM8001_IO_DBG(pm8001_ha, pm8001_printk(
> "Sending Normal SAS command 0x%x inb q %x\n",
> - task->ssp_task.cmd->cmnd[0], inb));
> + task->ssp_task.cmd->cmnd[0], q_index));
> /* fill in PRD (scatter/gather) table, if any */
> if (task->num_scatter > 1) {
> pm8001_chip_make_sg(task->scatter, ccb->n_elem,
> @@ -3809,11 +3809,9 @@ static int pm80xx_chip_ssp_io_req(struct pm8001_hba_info *pm8001_ha,
> ssp_cmd.esgl = 0;
> }
> }
> - ret = pm8001_mpi_build_cmd(pm8001_ha, circularQ, opc, &ssp_cmd, outb++);
> -
> - /* rotate the outb queue */
> - outb = outb%PM8001_MAX_SPCV_OUTB_NUM;
> -
> + q_index = (u32) (pm8001_dev->id & 0x00ffffff) % PM8001_MAX_OUTB_NUM;
> + ret = pm8001_mpi_build_cmd(pm8001_ha, circularQ, opc,
> + &ssp_cmd, q_index);
> return ret;
> }
>
> @@ -3825,8 +3823,7 @@ static int pm80xx_chip_sata_req(struct pm8001_hba_info *pm8001_ha,
> struct pm8001_device *pm8001_ha_dev = dev->lldd_dev;
> u32 tag = ccb->ccb_tag;
> int ret;
> - static u32 inb;
> - static u32 outb;
> + u32 q_index;
> struct sata_start_req sata_cmd;
> u32 hdr_tag, ncg_tag = 0;
> u64 phys_addr;
> @@ -3836,7 +3833,8 @@ static int pm80xx_chip_sata_req(struct pm8001_hba_info *pm8001_ha,
> unsigned long flags;
> u32 opc = OPC_INB_SATA_HOST_OPSTART;
> memset(&sata_cmd, 0, sizeof(sata_cmd));
> - circularQ = &pm8001_ha->inbnd_q_tbl[0];
> + q_index = (u32) (pm8001_ha_dev->id & 0x00ffffff) % PM8001_MAX_INB_NUM;
> + circularQ = &pm8001_ha->inbnd_q_tbl[q_index];
>
> if (task->data_dir == PCI_DMA_NONE) {
> ATAP = 0x04; /* no data*/
> @@ -3917,7 +3915,7 @@ static int pm80xx_chip_sata_req(struct pm8001_hba_info *pm8001_ha,
> } else {
> PM8001_IO_DBG(pm8001_ha, pm8001_printk(
> "Sending Normal SATA command 0x%x inb %x\n",
> - sata_cmd.sata_fis.command, inb));
> + sata_cmd.sata_fis.command, q_index));
> /* dad (bit 0-1) is 0 */
> sata_cmd.ncqtag_atap_dir_m_dad =
> cpu_to_le32(((ncg_tag & 0xff)<<16) |
> @@ -4014,12 +4012,9 @@ static int pm80xx_chip_sata_req(struct pm8001_hba_info *pm8001_ha,
> }
> }
> }
> -
> + q_index = (u32) (pm8001_ha_dev->id & 0x00ffffff) % PM8001_MAX_OUTB_NUM;
> ret = pm8001_mpi_build_cmd(pm8001_ha, circularQ, opc,
> - &sata_cmd, outb++);
> -
> - /* rotate the outb queue */
> - outb = outb%PM8001_MAX_SPCV_OUTB_NUM;
> + &sata_cmd, q_index);
> return ret;
> }
>
>
next prev parent reply other threads:[~2013-09-26 7:07 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-09-26 5:40 [PATCH V2 08/10] pm80xx: Queue rotation logic for inbound and outbound queues Anand
2013-09-26 7:08 ` Jack Wang [this message]
2013-09-26 9:09 ` Sangeetha Gnanasekaran
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5243DD52.7010304@gmail.com \
--to=xjtuwjp@gmail.com \
--cc=Nikith.Ganigarakoppal@pmcs.com \
--cc=Sangeetha.Gnanasekaran@pmcs.com \
--cc=Viswas.G@pmcs.com \
--cc=anandkumar_santhanam@pmc-sierra.com \
--cc=linux-scsi@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox