From: Paolo Bonzini <pbonzini@redhat.com>
To: "Nicholas A. Bellinger" <nab@daterainc.com>,
target-devel <target-devel@vger.kernel.org>
Cc: linux-scsi <linux-scsi@vger.kernel.org>,
"Michael S. Tsirkin" <mst@redhat.com>,
"Martin K. Petersen" <martin.petersen@oracle.com>,
Sagi Grimberg <sagig@mellanox.com>,
Christoph Hellwig <hch@lst.de>, Hannes Reinecke <hare@suse.de>,
"H. Peter Anvin" <hpa@zytor.com>,
Nicholas Bellinger <nab@linux-iscsi.org>,
Sagi Grimberg <sagig@dev.mellanox.co.il>
Subject: Re: [PATCH-v2 6/6] virtio-scsi: Enable DIF/DIX modes in SCSI host LLD
Date: Thu, 22 May 2014 10:37:31 +0200 [thread overview]
Message-ID: <537DB74B.6010208@redhat.com> (raw)
In-Reply-To: <1400725582-5521-7-git-send-email-nab@daterainc.com>
Il 22/05/2014 04:26, Nicholas A. Bellinger ha scritto:
> From: Nicholas Bellinger <nab@linux-iscsi.org>
>
> This patch updates virtscsi_probe() to setup necessary Scsi_Host
> level protection resources. (currently hardcoded to 1)
>
> It changes virtscsi_add_cmd() to attach outgoing / incoming
> protection SGLs preceeding the data payload, and is using the
> new virtio_scsi_cmd_req_pi->d[oi],pi_niv field to signal
Wrong field name in the commit message...
> to signal to vhost/scsi how many prot_sgs to expect.
s/prot_sgs to expect/bytes to expect for protection data/
Apart from this, which can be fixed in the pull request,
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
for getting this in via the target tree.
Paolo
> v4 changes:
> - Convert virtio_scsi_init_hdr_pi to use pi_bytesout + pi_bytesin
> (mst + paolo + nab)
> - Use blk_integrity->tuple_size to calculate pi bytes (nab)
>
> v3 changes:
> - Use VIRTIO_SCSI_F_T10_PI to determine PI or non PI header (Paolo)
>
> v2 changes:
> - Make protection buffer come before data buffer (Paolo)
> - Enable virtio_scsi_cmd_req_pi usage (Paolo)
>
> Cc: Paolo Bonzini <pbonzini@redhat.com>
> Cc: Michael S. Tsirkin <mst@redhat.com>
> Cc: Martin K. Petersen <martin.petersen@oracle.com>
> Cc: Christoph Hellwig <hch@lst.de>
> Cc: Hannes Reinecke <hare@suse.de>
> Cc: Sagi Grimberg <sagig@dev.mellanox.co.il>
> Cc: H. Peter Anvin <hpa@zytor.com>
> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
> ---
> drivers/scsi/virtio_scsi.c | 86 ++++++++++++++++++++++++++++++++++----------
> 1 file changed, 68 insertions(+), 18 deletions(-)
>
> diff --git a/drivers/scsi/virtio_scsi.c b/drivers/scsi/virtio_scsi.c
> index 16bfd50..cc634b0 100644
> --- a/drivers/scsi/virtio_scsi.c
> +++ b/drivers/scsi/virtio_scsi.c
> @@ -37,6 +37,7 @@ struct virtio_scsi_cmd {
> struct completion *comp;
> union {
> struct virtio_scsi_cmd_req cmd;
> + struct virtio_scsi_cmd_req_pi cmd_pi;
> struct virtio_scsi_ctrl_tmf_req tmf;
> struct virtio_scsi_ctrl_an_req an;
> } req;
> @@ -440,7 +441,7 @@ static int virtscsi_add_cmd(struct virtqueue *vq,
> size_t req_size, size_t resp_size, gfp_t gfp)
> {
> struct scsi_cmnd *sc = cmd->sc;
> - struct scatterlist *sgs[4], req, resp;
> + struct scatterlist *sgs[6], req, resp;
> struct sg_table *out, *in;
> unsigned out_num = 0, in_num = 0;
>
> @@ -458,16 +459,24 @@ static int virtscsi_add_cmd(struct virtqueue *vq,
> sgs[out_num++] = &req;
>
> /* Data-out buffer. */
> - if (out)
> + if (out) {
> + /* Place WRITE protection SGLs before Data OUT payload */
> + if (scsi_prot_sg_count(sc))
> + sgs[out_num++] = scsi_prot_sglist(sc);
> sgs[out_num++] = out->sgl;
> + }
>
> /* Response header. */
> sg_init_one(&resp, &cmd->resp, resp_size);
> sgs[out_num + in_num++] = &resp;
>
> /* Data-in buffer */
> - if (in)
> + if (in) {
> + /* Place READ protection SGLs before Data IN payload */
> + if (scsi_prot_sg_count(sc))
> + sgs[out_num + in_num++] = scsi_prot_sglist(sc);
> sgs[out_num + in_num++] = in->sgl;
> + }
>
> return virtqueue_add_sgs(vq, sgs, out_num, in_num, cmd, gfp);
> }
> @@ -492,12 +501,44 @@ static int virtscsi_kick_cmd(struct virtio_scsi_vq *vq,
> return err;
> }
>
> +static void virtio_scsi_init_hdr(struct virtio_scsi_cmd_req *cmd,
> + struct scsi_cmnd *sc)
> +{
> + cmd->lun[0] = 1;
> + cmd->lun[1] = sc->device->id;
> + cmd->lun[2] = (sc->device->lun >> 8) | 0x40;
> + cmd->lun[3] = sc->device->lun & 0xff;
> + cmd->tag = (unsigned long)sc;
> + cmd->task_attr = VIRTIO_SCSI_S_SIMPLE;
> + cmd->prio = 0;
> + cmd->crn = 0;
> +}
> +
> +static void virtio_scsi_init_hdr_pi(struct virtio_scsi_cmd_req_pi *cmd_pi,
> + struct scsi_cmnd *sc)
> +{
> + struct request *rq = sc->request;
> + struct blk_integrity *bi;
> +
> + virtio_scsi_init_hdr((struct virtio_scsi_cmd_req *)cmd_pi, sc);
> +
> + if (!rq || !scsi_prot_sg_count(sc))
> + return;
> +
> + bi = blk_get_integrity(rq->rq_disk);
> +
> + if (sc->sc_data_direction == DMA_TO_DEVICE)
> + cmd_pi->pi_bytesout = blk_rq_sectors(rq) * bi->tuple_size;
> + else if (sc->sc_data_direction == DMA_FROM_DEVICE)
> + cmd_pi->pi_bytesin = blk_rq_sectors(rq) * bi->tuple_size;
> +}
> +
> static int virtscsi_queuecommand(struct virtio_scsi *vscsi,
> struct virtio_scsi_vq *req_vq,
> struct scsi_cmnd *sc)
> {
> struct virtio_scsi_cmd *cmd;
> - int ret;
> + int ret, req_size;
>
> struct Scsi_Host *shost = virtio_scsi_host(vscsi->vdev);
> BUG_ON(scsi_sg_count(sc) > shost->sg_tablesize);
> @@ -515,22 +556,20 @@ static int virtscsi_queuecommand(struct virtio_scsi *vscsi,
>
> memset(cmd, 0, sizeof(*cmd));
> cmd->sc = sc;
> - cmd->req.cmd = (struct virtio_scsi_cmd_req){
> - .lun[0] = 1,
> - .lun[1] = sc->device->id,
> - .lun[2] = (sc->device->lun >> 8) | 0x40,
> - .lun[3] = sc->device->lun & 0xff,
> - .tag = (unsigned long)sc,
> - .task_attr = VIRTIO_SCSI_S_SIMPLE,
> - .prio = 0,
> - .crn = 0,
> - };
>
> BUG_ON(sc->cmd_len > VIRTIO_SCSI_CDB_SIZE);
> - memcpy(cmd->req.cmd.cdb, sc->cmnd, sc->cmd_len);
>
> - if (virtscsi_kick_cmd(req_vq, cmd,
> - sizeof cmd->req.cmd, sizeof cmd->resp.cmd,
> + if (virtio_has_feature(vscsi->vdev, VIRTIO_SCSI_F_T10_PI)) {
> + virtio_scsi_init_hdr_pi(&cmd->req.cmd_pi, sc);
> + memcpy(cmd->req.cmd_pi.cdb, sc->cmnd, sc->cmd_len);
> + req_size = sizeof(cmd->req.cmd_pi);
> + } else {
> + virtio_scsi_init_hdr(&cmd->req.cmd, sc);
> + memcpy(cmd->req.cmd.cdb, sc->cmnd, sc->cmd_len);
> + req_size = sizeof(cmd->req.cmd);
> + }
> +
> + if (virtscsi_kick_cmd(req_vq, cmd, req_size, sizeof(cmd->resp.cmd),
> GFP_ATOMIC) == 0)
> ret = 0;
> else
> @@ -871,7 +910,7 @@ static int virtscsi_probe(struct virtio_device *vdev)
> {
> struct Scsi_Host *shost;
> struct virtio_scsi *vscsi;
> - int err;
> + int err, host_prot;
> u32 sg_elems, num_targets;
> u32 cmd_per_lun;
> u32 num_queues;
> @@ -921,6 +960,16 @@ static int virtscsi_probe(struct virtio_device *vdev)
> shost->max_id = num_targets;
> shost->max_channel = 0;
> shost->max_cmd_len = VIRTIO_SCSI_CDB_SIZE;
> +
> + if (virtio_has_feature(vdev, VIRTIO_SCSI_F_T10_PI)) {
> + host_prot = SHOST_DIF_TYPE1_PROTECTION | SHOST_DIF_TYPE2_PROTECTION |
> + SHOST_DIF_TYPE3_PROTECTION | SHOST_DIX_TYPE1_PROTECTION |
> + SHOST_DIX_TYPE2_PROTECTION | SHOST_DIX_TYPE3_PROTECTION;
> +
> + scsi_host_set_prot(shost, host_prot);
> + scsi_host_set_guard(shost, SHOST_DIX_GUARD_CRC);
> + }
> +
> err = scsi_add_host(shost, &vdev->dev);
> if (err)
> goto scsi_add_host_failed;
> @@ -990,6 +1039,7 @@ static struct virtio_device_id id_table[] = {
> static unsigned int features[] = {
> VIRTIO_SCSI_F_HOTPLUG,
> VIRTIO_SCSI_F_CHANGE,
> + VIRTIO_SCSI_F_T10_PI,
> };
>
> static struct virtio_driver virtio_scsi_driver = {
>
next prev parent reply other threads:[~2014-05-22 8:37 UTC|newest]
Thread overview: 36+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-05-22 2:26 [PATCH-v2 0/6] vhost/scsi: Add T10 PI SGL passthrough support Nicholas A. Bellinger
2014-05-22 2:26 ` [PATCH-v2 1/6] virtio-scsi.h: Add virtio_scsi_cmd_req_pi + VIRTIO_SCSI_F_T10_PI bits Nicholas A. Bellinger
2014-05-22 6:57 ` Michael S. Tsirkin
2014-05-22 11:00 ` Rusty Russell
2014-05-22 20:38 ` Nicholas A. Bellinger
2014-06-09 13:16 ` Michael S. Tsirkin
2014-05-22 2:26 ` [PATCH-v2 2/6] vhost/scsi: Move sanity check into vhost_scsi_map_iov_to_sgl Nicholas A. Bellinger
2014-05-22 2:26 ` [PATCH-v2 3/6] vhost/scsi: Add preallocation of protection SGLs Nicholas A. Bellinger
2014-05-22 2:26 ` [PATCH-v2 4/6] vhost/scsi: Add T10 PI IOV -> SGL memory mapping logic Nicholas A. Bellinger
2014-05-22 2:26 ` [PATCH-v2 5/6] vhost/scsi: Enable T10 PI IOV -> SGL memory mapping Nicholas A. Bellinger
2014-06-09 13:15 ` Michael S. Tsirkin
2014-05-22 2:26 ` [PATCH-v2 6/6] virtio-scsi: Enable DIF/DIX modes in SCSI host LLD Nicholas A. Bellinger
2014-05-22 8:37 ` Paolo Bonzini [this message]
2014-05-22 20:41 ` Nicholas A. Bellinger
2014-05-22 8:37 ` [PATCH-v2 0/6] vhost/scsi: Add T10 PI SGL passthrough support Paolo Bonzini
2014-06-02 7:31 ` Michael S. Tsirkin
2014-06-08 16:05 ` Michael S. Tsirkin
2014-06-09 9:06 ` Paolo Bonzini
2014-06-10 7:07 ` Nicholas A. Bellinger
2014-06-10 8:03 ` Paolo Bonzini
2014-06-09 13:30 ` Michael S. Tsirkin
2014-06-10 7:05 ` Nicholas A. Bellinger
2014-06-10 9:42 ` Michael S. Tsirkin
2014-06-10 11:52 ` Stephen Rothwell
2014-06-10 13:02 ` Michael S. Tsirkin
2014-06-10 15:47 ` Stephen Rothwell
2014-06-10 17:39 ` Nicholas A. Bellinger
2014-06-10 18:45 ` Michael S. Tsirkin
2014-06-10 19:57 ` Nicholas A. Bellinger
2014-06-10 20:09 ` James Bottomley
2014-06-10 20:25 ` Nicholas A. Bellinger
2014-06-10 20:56 ` Linus Torvalds
2014-06-10 21:20 ` Nicholas A. Bellinger
2014-06-11 8:04 ` Michael S. Tsirkin
2014-06-10 19:35 ` Michael S. Tsirkin
2014-06-10 19:53 ` Nicholas A. Bellinger
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=537DB74B.6010208@redhat.com \
--to=pbonzini@redhat.com \
--cc=hare@suse.de \
--cc=hch@lst.de \
--cc=hpa@zytor.com \
--cc=linux-scsi@vger.kernel.org \
--cc=martin.petersen@oracle.com \
--cc=mst@redhat.com \
--cc=nab@daterainc.com \
--cc=nab@linux-iscsi.org \
--cc=sagig@dev.mellanox.co.il \
--cc=sagig@mellanox.com \
--cc=target-devel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).