From: Tomas Henzl <thenzl@redhat.com>
To: Maurizio Lombardi <mlombard@redhat.com>, jayamohan.kallickal@emulex.com
Cc: linux-scsi@vger.kernel.org, michaelc@cs.wisc.edu,
hch@infradead.org, JBottomley@parallels.com
Subject: Re: [PATCH] b2iscsi: Fix memory leak in mgmt_set_ip()
Date: Fri, 27 Jun 2014 18:32:10 +0200 [thread overview]
Message-ID: <53AD9C8A.7010007@redhat.com> (raw)
In-Reply-To: <1403873720-9642-1-git-send-email-mlombard@redhat.com>
On 06/27/2014 02:55 PM, Maurizio Lombardi wrote:
> The if_info pointer is not released by the mgmt_set_ip() function
>
> Signed-off-by: Maurizio Lombardi <mlombard@redhat.com>
> ---
> drivers/scsi/be2iscsi/be_mgmt.c | 20 +++++++++++---------
> 1 file changed, 11 insertions(+), 9 deletions(-)
>
> diff --git a/drivers/scsi/be2iscsi/be_mgmt.c b/drivers/scsi/be2iscsi/be_mgmt.c
> index 07934b0..a3e5648 100644
> --- a/drivers/scsi/be2iscsi/be_mgmt.c
> +++ b/drivers/scsi/be2iscsi/be_mgmt.c
> @@ -1015,7 +1015,7 @@ int mgmt_set_ip(struct beiscsi_hba *phba,
> if (if_info->dhcp_state) {
> beiscsi_log(phba, KERN_WARNING, BEISCSI_LOG_CONFIG,
> "BG_%d : DHCP Already Enabled\n");
> - return 0;
> + goto exit;
rc should be initialised - so this needs to be added to your patch
Cheers, Tomas
@@ -955,7 +955,7 @@ int mgmt_set_ip(struct beiscsi_hba *phba,
struct be_dma_mem nonemb_cmd;
uint8_t *gtway_addr;
uint32_t ip_type;
- int rc;
+ int rc = 0;
if (mgmt_get_all_if_id(phba))
return -EIO;
> }
> /* The ip_param->len is 1 in DHCP case. Setting
> proper IP len as this it is used while
> @@ -1033,7 +1033,7 @@ int mgmt_set_ip(struct beiscsi_hba *phba,
> sizeof(*reldhcp));
>
> if (rc)
> - return rc;
> + goto exit;
>
> reldhcp = nonemb_cmd.va;
> reldhcp->interface_hndl = phba->interface_handle;
> @@ -1044,7 +1044,7 @@ int mgmt_set_ip(struct beiscsi_hba *phba,
> beiscsi_log(phba, KERN_WARNING,
> BEISCSI_LOG_CONFIG,
> "BG_%d : Failed to Delete existing dhcp\n");
> - return rc;
> + goto exit;
> }
> }
> }
> @@ -1054,7 +1054,7 @@ int mgmt_set_ip(struct beiscsi_hba *phba,
> rc = mgmt_static_ip_modify(phba, if_info, ip_param, NULL,
> IP_ACTION_DEL);
> if (rc)
> - return rc;
> + goto exit;
> }
>
> /* Delete the Gateway settings if mode change is to DHCP */
> @@ -1064,7 +1064,7 @@ int mgmt_set_ip(struct beiscsi_hba *phba,
> if (rc) {
> beiscsi_log(phba, KERN_WARNING, BEISCSI_LOG_CONFIG,
> "BG_%d : Failed to Get Gateway Addr\n");
> - return rc;
> + goto exit;
> }
>
> if (gtway_addr_set.ip_addr.addr[0]) {
> @@ -1076,7 +1076,7 @@ int mgmt_set_ip(struct beiscsi_hba *phba,
> beiscsi_log(phba, KERN_WARNING,
> BEISCSI_LOG_CONFIG,
> "BG_%d : Failed to clear Gateway Addr Set\n");
> - return rc;
> + goto exit;
> }
> }
> }
> @@ -1087,7 +1087,7 @@ int mgmt_set_ip(struct beiscsi_hba *phba,
> OPCODE_COMMON_ISCSI_NTWK_CONFIG_STATELESS_IP_ADDR,
> sizeof(*dhcpreq));
> if (rc)
> - return rc;
> + goto exit;
>
> dhcpreq = nonemb_cmd.va;
> dhcpreq->flags = BLOCKING;
> @@ -1095,12 +1095,14 @@ int mgmt_set_ip(struct beiscsi_hba *phba,
> dhcpreq->interface_hndl = phba->interface_handle;
> dhcpreq->ip_type = BE2_DHCP_V4;
>
> - return mgmt_exec_nonemb_cmd(phba, &nonemb_cmd, NULL, 0);
> + rc = mgmt_exec_nonemb_cmd(phba, &nonemb_cmd, NULL, 0);
> } else {
> - return mgmt_static_ip_modify(phba, if_info, ip_param,
> + rc = mgmt_static_ip_modify(phba, if_info, ip_param,
> subnet_param, IP_ACTION_ADD);
> }
>
> +exit:
> + kfree(if_info);
> return rc;
> }
>
next prev parent reply other threads:[~2014-06-27 18:29 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-06-27 12:55 [PATCH] b2iscsi: Fix memory leak in mgmt_set_ip() Maurizio Lombardi
2014-06-27 16:32 ` Tomas Henzl [this message]
2014-06-27 19:38 ` Maurizio Lombardi
2014-06-29 18:28 ` Tomas Henzl
2014-07-01 18:53 ` Christoph Hellwig
2014-07-07 11:29 ` Tomas Henzl
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=53AD9C8A.7010007@redhat.com \
--to=thenzl@redhat.com \
--cc=JBottomley@parallels.com \
--cc=hch@infradead.org \
--cc=jayamohan.kallickal@emulex.com \
--cc=linux-scsi@vger.kernel.org \
--cc=michaelc@cs.wisc.edu \
--cc=mlombard@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox