From: Luigi Tarenga <luigi.tarenga@gmail.com>
To: linux-scsi@vger.kernel.org, target-devel@vger.kernel.org
Subject: PR registration on LIO iscsi returns sense key not ready
Date: Thu, 02 Oct 2014 12:47:09 +0200 [thread overview]
Message-ID: <542D2D2D.2030100@gmail.com> (raw)
hello everybody,
I have a little problem with LIO iscsi target and SPC-3 persistent
reservation.
The summary of my setup is:
host:
centos 6.5 x86_64 with custom kernel 3.16.3 + scst patches
targetcli (-fb) 2.1.fb37
this host is configured to export a lun0 to the guest via iscsi
guest:
centos 7 x64_64 with stock kernel 3.10.0-123.6.3.el7.x86_64
iscsi-initiator-utils-6.2.0.873-21.el7.x86_64
sg3_utils-1.37-5.el7.x86_64
on the host LIO is configured as:
[root@lizard ~]# targetcli ls
o- /
.......................................................................................................................
[...]
o- backstores
............................................................................................................
[...]
| o- block
................................................................................................
[Storage Objects: 0]
| o- fileio
...............................................................................................
[Storage Objects: 1]
| | o- disk0
..................................................................
[/root/lun-test1 (10.0MiB) write-back activated]
| o- pscsi
................................................................................................
[Storage Objects: 0]
| o- ramdisk
..............................................................................................
[Storage Objects: 0]
o- iscsi
..........................................................................................................
[Targets: 1]
| o- iqn.2003-01.org.linux-iscsi.lizard.x8664:sn.15df8aa9db1d
........................................................ [TPGs: 1]
| o- tpg1
.............................................................................................
[no-gen-acls, no-auth]
| o- acls
........................................................................................................
[ACLs: 2]
| | o- iqn.1994-05.com.redhat:1fc561f74faa
................................................................ [Mapped
LUNs: 1]
| | | o- mapped_lun0
..............................................................................
[lun0 fileio/disk0 (rw)]
| | o- iqn.1994-05.com.redhat:b45af55c1b7e
................................................................ [Mapped
LUNs: 1]
| | o- mapped_lun0
..............................................................................
[lun0 fileio/disk0 (rw)]
| o- luns
........................................................................................................
[LUNs: 1]
| | o- lun0
...............................................................................
[fileio/disk0 (/root/lun-test1)]
| o- portals
..................................................................................................
[Portals: 1]
| o- 0.0.0.0:3260
...................................................................................................
[OK]
o- loopback
.......................................................................................................
[Targets: 0]
o- sbp
............................................................................................................
[Targets: 0]
o- vhost
..........................................................................................................
[Targets: 0]
the guest virtualization is done with qemu-2.0.0+kvm, NIC is virt-io and
the guest
connect to the host via a tap device.
The guest can connect to the iSCSI target and i see the device as /dev/sda.
I partitioned, formatted and mounted it successfully.
My problem that every PR Out command return a sense key not ready
even if the command run successfully, see this sequence:
[root@centos7 ~]# ll
/dev/disk/by-path/ip-172.24.49.193\:3260-iscsi-iqn.2003-01.org.linux-iscsi.lizard.x8664\:sn.15df8aa9db1d-lun-0
lrwxrwxrwx. 1 root root 9 Oct 2 12:29
/dev/disk/by-path/ip-172.24.49.193:3260-iscsi-iqn.2003-01.org.linux-iscsi.lizard.x8664:sn.15df8aa9db1d-lun-0
-> ../../sda
[root@centos7 ~]# sg_persist -n --read-keys --device=/dev/sda
PR generation=0x0, there are NO registered reservation keys
[root@centos7 ~]# sg_persist -n -v --out --register
--param-sark=ac1831c2 --device=/dev/sda
Persistent Reservation Out cmd: 5f 00 00 00 00 00 00 00 18 00
persistent reserve out: Fixed format, current; Sense key: Not Ready
Additional sense: Logical unit communication failure
PR out: command failed
[root@centos7 ~]# sg_persist -n --read-keys --device=/dev/sda
PR generation=0x1, 1 registered reservation key follows:
0xac1831c2
[root@centos7 ~]# sg_persist -n -v --out --register --param-rk=ac1831c2
--device=/dev/sda
Persistent Reservation Out cmd: 5f 00 00 00 00 00 00 00 18 00
persistent reserve out: Fixed format, current; Sense key: Not Ready
Additional sense: Logical unit communication failure
PR out: command failed
[root@centos7 ~]# sg_persist -n --read-keys --device=/dev/sda
PR generation=0x1, there are NO registered reservation keys
[root@centos7 ~]# dmesg | tail
[ 170.695433] scsi 3:0:0:0: alua: port group 00 rel port 01
[ 170.695626] scsi 3:0:0:0: alua: port group 00 state A non-preferred
supports TOlUSNA
[ 170.695629] scsi 3:0:0:0: alua: Attached
[ 170.698855] scsi 3:0:0:0: Attached scsi generic sg1 type 0
[ 170.738866] sd 3:0:0:0: [sda] 20480 512-byte logical blocks: (10.4
MB/10.0 MiB)
[ 170.740658] sd 3:0:0:0: [sda] Write Protect is off
[ 170.740664] sd 3:0:0:0: [sda] Mode Sense: 43 00 10 08
[ 170.741107] sd 3:0:0:0: [sda] Write cache: enabled, read cache:
enabled, supports DPO and FUA
[ 170.745222] sda: sda1
[ 170.747875] sd 3:0:0:0: [sda] Attached SCSI disk
With the same setup I tryed to switch from LIO to scst and it works as
expected, sg_persist
can register and reserve keys without getting a sense key not ready.
My tought are about a little bug in LIO but maybe is it my fault that I
added some patches to
vanilla kernel that broke LIO?
the patches I added are:
scst_exec_req_fifo-3.16.patch
put_page_callback-3.16.patch
as documented here:
http://scst.sourceforge.net/iscsi-scst-howto.txt
regards
Luigi
next reply other threads:[~2014-10-02 10:47 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-10-02 10:47 Luigi Tarenga [this message]
2014-10-02 14:11 ` PR registration on LIO iscsi returns sense key not ready Christophe Vu-Brugier
2014-10-02 14:31 ` Luigi Tarenga
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=542D2D2D.2030100@gmail.com \
--to=luigi.tarenga@gmail.com \
--cc=linux-scsi@vger.kernel.org \
--cc=target-devel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox