From: Mike Christie <michaelc@cs.wisc.edu>
To: Anish Bhatt <anish@chelsio.com>, linux-scsi@vger.kernel.org
Cc: hch@infradead.org, jbottomley@parallels.com, kxie@chelsio.com,
manojmalviya@chelsio.com
Subject: Re: [PATCH scsi] libcxgbi : support ipv6 address host_param
Date: Tue, 21 Oct 2014 14:09:17 -0500 [thread overview]
Message-ID: <5446AF5D.8010307@cs.wisc.edu> (raw)
In-Reply-To: <1413500359-27521-1-git-send-email-anish@chelsio.com>
On 10/16/2014 05:59 PM, Anish Bhatt wrote:
> libcxgbi was always returning an ipv4 address for ISCSI_HOST_PARAM_IPADDRESS,
> return appropriate address based on address family
>
> Signed-off-by: Anish Bhatt <anish@chelsio.com>
> Signed-off-by: Karen Xie <kxie@chelsio.com>
> ---
> drivers/scsi/cxgbi/libcxgbi.c | 42 +++++++++++++++++++++++++++++++++++++-----
> drivers/scsi/cxgbi/libcxgbi.h | 5 -----
> 2 files changed, 37 insertions(+), 10 deletions(-)
>
> diff --git a/drivers/scsi/cxgbi/libcxgbi.c b/drivers/scsi/cxgbi/libcxgbi.c
> index 6a2001d..403330a 100644
> --- a/drivers/scsi/cxgbi/libcxgbi.c
> +++ b/drivers/scsi/cxgbi/libcxgbi.c
> @@ -397,6 +397,35 @@ EXPORT_SYMBOL_GPL(cxgbi_hbas_add);
> * If the source port is outside our allocation range, the caller is
> * responsible for keeping track of their port usage.
> */
> +
> +static struct cxgbi_sock *find_sock_on_port(struct cxgbi_device *cdev,
> + unsigned char port_id)
> +{
> + struct cxgbi_ports_map *pmap = &cdev->pmap;
> + unsigned int i;
> + unsigned int used;
> +
> + if (!pmap->max_connect || !pmap->used)
> + return NULL;
> +
> + spin_lock_bh(&pmap->lock);
> + used = pmap->used;
> + for (i = 0; used && i < pmap->max_connect; i++) {
> + struct cxgbi_sock *csk = pmap->port_csk[i];
> +
> + if (csk) {
> + if (csk->port_id == port_id) {
> + spin_unlock_bh(&pmap->lock);
> + return csk;
> + }
> + used--;
> + }
> + }
> + spin_unlock_bh(&pmap->lock);
> +
> + return NULL;
> +}
> +
> static int sock_get_port(struct cxgbi_sock *csk)
> {
> struct cxgbi_device *cdev = csk->cdev;
> @@ -747,6 +776,7 @@ static struct cxgbi_sock *cxgbi_check_route6(struct sockaddr *dst_addr)
> csk->daddr6.sin6_addr = daddr6->sin6_addr;
> csk->daddr6.sin6_port = daddr6->sin6_port;
> csk->daddr6.sin6_family = daddr6->sin6_family;
> + csk->saddr6.sin6_family = daddr6->sin6_family;
> csk->saddr6.sin6_addr = pref_saddr;
>
> neigh_release(n);
> @@ -2645,12 +2675,14 @@ int cxgbi_get_host_param(struct Scsi_Host *shost, enum iscsi_host_param param,
> break;
> case ISCSI_HOST_PARAM_IPADDRESS:
> {
> - __be32 addr;
> -
> - addr = cxgbi_get_iscsi_ipv4(chba);
> - len = sprintf(buf, "%pI4", &addr);
> + struct cxgbi_sock *csk = find_sock_on_port(chba->cdev,
> + chba->port_id);
> + if (csk) {
> + len = sprintf(buf, "%pIS",
> + (struct sockaddr *)&csk->saddr);
> + }
> log_debug(1 << CXGBI_DBG_ISCSI,
> - "hba %s, ipv4 %pI4.\n", chba->ndev->name, &addr);
> + "hba %s, addr %s.\n", chba->ndev->name, buf);
> break;
> }
> default:
> diff --git a/drivers/scsi/cxgbi/libcxgbi.h b/drivers/scsi/cxgbi/libcxgbi.h
> index 1d98fad..2c7cb1c 100644
> --- a/drivers/scsi/cxgbi/libcxgbi.h
> +++ b/drivers/scsi/cxgbi/libcxgbi.h
> @@ -700,11 +700,6 @@ static inline void cxgbi_set_iscsi_ipv4(struct cxgbi_hba *chba, __be32 ipaddr)
> chba->ndev->name);
> }
>
> -static inline __be32 cxgbi_get_iscsi_ipv4(struct cxgbi_hba *chba)
> -{
> - return chba->ipv4addr;
> -}
> -
> struct cxgbi_device *cxgbi_device_register(unsigned int, unsigned int);
> void cxgbi_device_unregister(struct cxgbi_device *);
> void cxgbi_device_unregister_all(unsigned int flag);
>
Looks ok.
Reviewed-by: Mike Christie <michaelc@cs.wisc.edu>
next prev parent reply other threads:[~2014-10-21 19:19 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-10-16 22:59 [PATCH scsi] libcxgbi : support ipv6 address host_param Anish Bhatt
2014-10-17 19:43 ` Anish Bhatt
2014-10-18 15:12 ` hch
2014-10-18 15:18 ` hch
2014-10-19 4:07 ` Anish Bhatt
2014-10-19 14:17 ` hch
2014-10-19 17:51 ` Anish Bhatt
2014-10-21 19:09 ` Mike Christie [this message]
2014-10-25 0:06 ` Anish Bhatt
2014-10-27 9:56 ` hch
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5446AF5D.8010307@cs.wisc.edu \
--to=michaelc@cs.wisc.edu \
--cc=anish@chelsio.com \
--cc=hch@infradead.org \
--cc=jbottomley@parallels.com \
--cc=kxie@chelsio.com \
--cc=linux-scsi@vger.kernel.org \
--cc=manojmalviya@chelsio.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox