[ V2 PATCH 0/2] TUR path is down after adapter gets reset in multipath configuration

[ V2 PATCH 0/2] TUR path is down after adapter gets reset in multipath configuration

[wenxiong]

This is V2 patches to fix TRU down issue after adapter gets reset.

Thanks,
Wendy
-- 

[ V2 PATCH 1/2] scsi: call device handler for failed TUR command

[wenxiong]

[-- Attachment #1: allow_restart1 --]
[-- Type: text/plain, Size: 2092 bytes --]

Multipath devices using the TUR path checker need to see the sense
code for a failed TUR command in their device handler.  Since commit
http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/
drivers/scsi/scsi_error.c?id=14216561e164671ce147458653b1fea06a
we always return success for mid layer issued TUR commands before
calling the device handler, which stopped the TUR path checker from working.

Move the call to the device handler check sense method before the early
return for TUR commands to give the device handler a chance to intercept
them.

Signed-off-by: Christoph Hellwig <hch@infradead.org>
Tested-by: Wen Xiong <wenxiong@linux.vnet.ibm.com>
---
 drivers/scsi/scsi_error.c |   16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)

Index: b/drivers/scsi/scsi_error.c
===================================================================
--- a/drivers/scsi/scsi_error.c	2014-10-23 12:54:16.000000000 -0500
+++ b/drivers/scsi/scsi_error.c	2014-10-23 12:57:44.642078988 -0500
@@ -459,14 +459,6 @@ static int scsi_check_sense(struct scsi_
 	if (! scsi_command_normalize_sense(scmd, &sshdr))
 		return FAILED;	/* no valid sense data */
 
-	if (scmd->cmnd[0] == TEST_UNIT_READY && scmd->scsi_done != scsi_eh_done)
-		/*
-		 * nasty: for mid-layer issued TURs, we need to return the
-		 * actual sense data without any recovery attempt.  For eh
-		 * issued ones, we need to try to recover and interpret
-		 */
-		return SUCCESS;
-
 	scsi_report_sense(sdev, &sshdr);
 
 	if (scsi_sense_is_deferred(&sshdr))
@@ -482,6 +474,14 @@ static int scsi_check_sense(struct scsi_
 		/* handler does not care. Drop down to default handling */
 	}
 
+	if (scmd->cmnd[0] == TEST_UNIT_READY && scmd->scsi_done != scsi_eh_done)
+		/*
+		 * nasty: for mid-layer issued TURs, we need to return the
+		 * actual sense data without any recovery attempt.  For eh
+		 * issued ones, we need to try to recover and interpret
+		 */
+		return SUCCESS;
+
 	/*
 	 * Previous logic looked for FILEMARK, EOM or ILI which are
 	 * mainly associated with tapes and returned SUCCESS.

-- 

Re: [ V2 PATCH 1/2] scsi: call device handler for failed TUR command

[Hannes Reinecke]

On 11/03/2014 10:28 PM, wenxiong@linux.vnet.ibm.com wrote:
> Multipath devices using the TUR path checker need to see the sense
> code for a failed TUR command in their device handler.  Since commit
> http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/
> drivers/scsi/scsi_error.c?id=14216561e164671ce147458653b1fea06a
> we always return success for mid layer issued TUR commands before
> calling the device handler, which stopped the TUR path checker from working.
> 
> Move the call to the device handler check sense method before the early
> return for TUR commands to give the device handler a chance to intercept
> them.
> 
> Signed-off-by: Christoph Hellwig <hch@infradead.org>
> Tested-by: Wen Xiong <wenxiong@linux.vnet.ibm.com>
> ---
>  drivers/scsi/scsi_error.c |   16 ++++++++--------
>  1 file changed, 8 insertions(+), 8 deletions(-)
> 
> Index: b/drivers/scsi/scsi_error.c
> ===================================================================
> --- a/drivers/scsi/scsi_error.c	2014-10-23 12:54:16.000000000 -0500
> +++ b/drivers/scsi/scsi_error.c	2014-10-23 12:57:44.642078988 -0500
> @@ -459,14 +459,6 @@ static int scsi_check_sense(struct scsi_
>  	if (! scsi_command_normalize_sense(scmd, &sshdr))
>  		return FAILED;	/* no valid sense data */
>  
> -	if (scmd->cmnd[0] == TEST_UNIT_READY && scmd->scsi_done != scsi_eh_done)
> -		/*
> -		 * nasty: for mid-layer issued TURs, we need to return the
> -		 * actual sense data without any recovery attempt.  For eh
> -		 * issued ones, we need to try to recover and interpret
> -		 */
> -		return SUCCESS;
> -
>  	scsi_report_sense(sdev, &sshdr);
>  
>  	if (scsi_sense_is_deferred(&sshdr))
> @@ -482,6 +474,14 @@ static int scsi_check_sense(struct scsi_
>  		/* handler does not care. Drop down to default handling */
>  	}
>  
> +	if (scmd->cmnd[0] == TEST_UNIT_READY && scmd->scsi_done != scsi_eh_done)
> +		/*
> +		 * nasty: for mid-layer issued TURs, we need to return the
> +		 * actual sense data without any recovery attempt.  For eh
> +		 * issued ones, we need to try to recover and interpret
> +		 */
> +		return SUCCESS;
> +
>  	/*
>  	 * Previous logic looked for FILEMARK, EOM or ILI which are
>  	 * mainly associated with tapes and returned SUCCESS.
> 
Reviewed-by: Hannes Reinecke <hare@suse.de>

Cheers,

Hannes
-- 
Dr. Hannes Reinecke		      zSeries & Storage
hare@suse.de			      +49 911 74053 688
SUSE LINUX Products GmbH, Maxfeldstr. 5, 90409 Nürnberg
GF: J. Hawn, J. Guild, F. Imendörffer, HRB 16746 (AG Nürnberg)
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[ V2 PATCH 2/2] scsi: TUR path is down after adapter gets reset with multipath

[wenxiong]

[-- Attachment #1: allow_restart2 --]
[-- Type: text/plain, Size: 2185 bytes --]

This patch fixes an issue with multipath ipr SAS devices which require a
start unit command to be issued following an adapter reset. Without this
patch, paths get marked failed following an adapter reset and since the
error handler never gets invoked to issue the start unit, the paths are
never recovered. Returning FAILED for this case ensures the error
handler wakes up to issue the start unit.

Signed-off-by: Brian King <brking@linux.vnet.ibm.com>
Teste-by: Wen Xiong <wenxiong@linux.vnet.ibm.com>
---
 drivers/scsi/device_handler/scsi_dh_alua.c |   20 +++++++++++++++++++-
 1 file changed, 19 insertions(+), 1 deletion(-)

Index: b/drivers/scsi/device_handler/scsi_dh_alua.c
===================================================================
--- a/drivers/scsi/device_handler/scsi_dh_alua.c	2014-10-29 20:50:29.000000000 -0500
+++ b/drivers/scsi/device_handler/scsi_dh_alua.c	2014-11-03 14:24:39.482078993 -0600
@@ -84,6 +84,7 @@ struct alua_dh_data {
 
 static char print_alua_state(int);
 static int alua_check_sense(struct scsi_device *, struct scsi_sense_hdr *);
+static int alua_check_sense_handler(struct scsi_device *, struct scsi_sense_hdr *);
 
 static inline struct alua_dh_data *get_alua_data(struct scsi_device *sdev)
 {
@@ -519,6 +520,23 @@ static int alua_check_sense(struct scsi_
 	return SCSI_RETURN_NOT_HANDLED;
 }
 
+static int alua_check_sense_handler(struct scsi_device *sdev,
+			    struct scsi_sense_hdr *sense_hdr)
+{
+	switch (sense_hdr->sense_key) {
+	case NOT_READY:
+		if (sdev->allow_restart &&
+		    sense_hdr->asc == 0x04 && sense_hdr->ascq == 0x02)
+			/*
+			 * if the device is not started, we need to wake
+			 * the error handler to start the motor
+			 */
+			return FAILED;
+		break;
+	}
+	alua_check_sense(sdev, sense_hdr);
+}
+
 /*
  * alua_rtpg - Evaluate REPORT TARGET GROUP STATES
  * @sdev: the device to be evaluated.
@@ -827,7 +845,7 @@ static struct scsi_device_handler alua_d
 	.attach = alua_bus_attach,
 	.detach = alua_bus_detach,
 	.prep_fn = alua_prep_fn,
-	.check_sense = alua_check_sense,
+	.check_sense = alua_check_sense_handler,
 	.activate = alua_activate,
 	.set_params = alua_set_params,
 	.match = alua_match,

-- 

[V2 PATCH 0/2] TUR path is down after adapter gets reset in multipath configuration

[wenxiong]

-- 

[V2 PATCH 1/2] scsi: call device handler for failed TUR command

[wenxiong]

[-- Attachment #1: allow_restart1 --]
[-- Type: text/plain, Size: 2092 bytes --]

Multipath devices using the TUR path checker need to see the sense
code for a failed TUR command in their device handler.  Since commit
http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/
drivers/scsi/scsi_error.c?id=14216561e164671ce147458653b1fea06a
we always return success for mid layer issued TUR commands before
calling the device handler, which stopped the TUR path checker from working.

Move the call to the device handler check sense method before the early
return for TUR commands to give the device handler a chance to intercept
them.

Signed-off-by: Christoph Hellwig <hch@infradead.org>
Tested-by: Wen Xiong <wenxiong@linux.vnet.ibm.com>
---
 drivers/scsi/scsi_error.c |   16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)

Index: b/drivers/scsi/scsi_error.c
===================================================================
--- a/drivers/scsi/scsi_error.c	2014-10-23 12:54:16.000000000 -0500
+++ b/drivers/scsi/scsi_error.c	2014-10-23 12:57:44.642078988 -0500
@@ -459,14 +459,6 @@ static int scsi_check_sense(struct scsi_
 	if (! scsi_command_normalize_sense(scmd, &sshdr))
 		return FAILED;	/* no valid sense data */
 
-	if (scmd->cmnd[0] == TEST_UNIT_READY && scmd->scsi_done != scsi_eh_done)
-		/*
-		 * nasty: for mid-layer issued TURs, we need to return the
-		 * actual sense data without any recovery attempt.  For eh
-		 * issued ones, we need to try to recover and interpret
-		 */
-		return SUCCESS;
-
 	scsi_report_sense(sdev, &sshdr);
 
 	if (scsi_sense_is_deferred(&sshdr))
@@ -482,6 +474,14 @@ static int scsi_check_sense(struct scsi_
 		/* handler does not care. Drop down to default handling */
 	}
 
+	if (scmd->cmnd[0] == TEST_UNIT_READY && scmd->scsi_done != scsi_eh_done)
+		/*
+		 * nasty: for mid-layer issued TURs, we need to return the
+		 * actual sense data without any recovery attempt.  For eh
+		 * issued ones, we need to try to recover and interpret
+		 */
+		return SUCCESS;
+
 	/*
 	 * Previous logic looked for FILEMARK, EOM or ILI which are
 	 * mainly associated with tapes and returned SUCCESS.

--