From: Mike Christie <michaelc-hcNo3dDEHLuVc3sceRu5cw@public.gmane.org>
To: "Martin K. Petersen"
<martin.petersen-QHcLZuEGTsvQT0dZR+AlfA@public.gmane.org>
Cc: open-iscsi-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org,
jazz-jYkeLfz6glqHXe+LvDLADg@public.gmane.org,
linux-scsi-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Subject: Re: iSCSI request keep rejected by microsoft iSCSI target because of write_same check
Date: Wed, 03 Dec 2014 11:08:23 -0600 [thread overview]
Message-ID: <547F4387.5010207@cs.wisc.edu> (raw)
In-Reply-To: <yq17fy9mnsx.fsf-+q57XtR/GgMb6DWv4sQWN6xOck334EZe@public.gmane.org>
On 12/2/14, 9:09 PM, Martin K. Petersen wrote:
>>>>>> "Mike" == Michael Christie <michaelc-hcNo3dDEHLuVc3sceRu5cw@public.gmane.org> writes:
>
> Mike,
>
> Mike> This was the issue we worked with Microsoft on wasn’t it? You guys
> Mike> figured out it was fixed in their target in a recent release
> Mike> right?
>
> The issue we worked recently was wrt. the thin provisioning reporting.
>
> The WRITE SAME problem was that the target returns an iSCSI-specific
> error code rather than a check condition with ILLEGAL REQUEST. You were
> going to talk to MS.
Are you sure about this? The issue you are talking about and the one
jazz is is the same issue right?
I do not have any of the old replies from MS, but I have some of the
mails I sent them. It looks like we were asking them about when sd.c
would send a REPORT SUPPORTED OPERATION, the old MS target would return
the iscsi specific error code. And it looks like they had us try a
updated version and in there it was changed to just work on their side.
Jazz-jYkeLfz6glqHXe+LvDLADg@public.gmane.org's patch would work around the same problem because in
sd_read_write_same, sd would see no_write_same is set and not send
REPORT SUPPORTED OPERATION.
The subject of that email thread with MS was "Linux iSCSI and Microsoft
target interop question". I started it with MS on Jan 14, 2014. Vaughan
ccd you on that thread a little later to get your help. I do not have
the replies though. I am just going by truncated snippets in mails sent,
so I do not know what version that was fixed in. Do you guys have the
replies by any chance?
--
You received this message because you are subscribed to the Google Groups "open-iscsi" group.
To unsubscribe from this group and stop receiving emails from it, send an email to open-iscsi+unsubscribe-/JYPxA39Uh5TLH3MbocFF+G/Ez6ZCGd0@public.gmane.org
To post to this group, send email to open-iscsi-/JYPxA39Uh5TLH3MbocFF+G/Ez6ZCGd0@public.gmane.org
Visit this group at http://groups.google.com/group/open-iscsi.
For more options, visit https://groups.google.com/d/optout.
next prev parent reply other threads:[~2014-12-03 17:08 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-01-09 10:20 iSCSI request keep rejected by microsoft iSCSI target because of write_same check vaughan
[not found] ` <52CE77FB.8020100-QHcLZuEGTsvQT0dZR+AlfA@public.gmane.org>
2014-01-09 18:38 ` Mike Christie
[not found] ` <52CEEC97.8050108-hcNo3dDEHLuVc3sceRu5cw@public.gmane.org>
2014-01-09 22:55 ` The Lee-Man
2014-01-10 1:43 ` Martin K. Petersen
2014-01-10 6:11 ` vaughan
[not found] ` <52CF8F0C.3040304-QHcLZuEGTsvQT0dZR+AlfA@public.gmane.org>
2014-01-10 7:41 ` Mike Christie
2014-01-10 8:09 ` vaughan
[not found] ` <52CFAA9F.5010706-QHcLZuEGTsvQT0dZR+AlfA@public.gmane.org>
2014-01-10 20:24 ` Mike Christie
2014-01-11 1:22 ` Vaughan Cao
[not found] ` <52D09CE6.80200-QHcLZuEGTsvQT0dZR+AlfA@public.gmane.org>
2014-12-01 7:25 ` jazz-jYkeLfz6glqHXe+LvDLADg
[not found] ` <a90377a8-3ef9-4fc2-a3e9-bfff23560674-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org>
2014-12-01 9:01 ` vaughan
[not found] ` <547C2E4D.1030802-QHcLZuEGTsvQT0dZR+AlfA@public.gmane.org>
2014-12-01 18:37 ` Michael Christie
2014-12-03 3:09 ` Martin K. Petersen
[not found] ` <yq17fy9mnsx.fsf-+q57XtR/GgMb6DWv4sQWN6xOck334EZe@public.gmane.org>
2014-12-03 17:08 ` Mike Christie [this message]
[not found] ` <547F4387.5010207-hcNo3dDEHLuVc3sceRu5cw@public.gmane.org>
2014-12-03 23:00 ` Martin K. Petersen
[not found] ` <yq1fvcwl4oy.fsf-+q57XtR/GgMb6DWv4sQWN6xOck334EZe@public.gmane.org>
2014-12-03 23:49 ` Mike Christie
[not found] ` <547FA18D.7030706-hcNo3dDEHLuVc3sceRu5cw@public.gmane.org>
2014-12-04 2:20 ` Martin K. Petersen
[not found] ` <52CFA440.7030104-hcNo3dDEHLuVc3sceRu5cw@public.gmane.org>
2014-01-10 8:29 ` vaughan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=547F4387.5010207@cs.wisc.edu \
--to=michaelc-hcno3ddehluvc3sceru5cw@public.gmane.org \
--cc=jazz-jYkeLfz6glqHXe+LvDLADg@public.gmane.org \
--cc=linux-scsi-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=martin.petersen-QHcLZuEGTsvQT0dZR+AlfA@public.gmane.org \
--cc=open-iscsi-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).