From: Aaron Lu <aaron.lu@intel.com>
To: "Rafael J. Wysocki" <rjw@rjwysocki.net>, linux-scsi@vger.kernel.org
Cc: Alan Stern <stern@rowland.harvard.edu>,
Linux Kernel Mailing List <linux-kernel@vger.kernel.org>,
Linux PM list <linux-pm@vger.kernel.org>,
"James E.J. Bottomley" <JBottomley@parallels.com>,
Vinayak Holikatti <vinholikatti@gmail.com>
Subject: Re: [Update][PATCH] SCSI / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM
Date: Wed, 10 Dec 2014 09:43:36 +0800 [thread overview]
Message-ID: <5487A548.6070800@intel.com> (raw)
In-Reply-To: <3039454.iyzHXUp3Uj@vostro.rjw.lan>
On 12/10/2014 05:47 AM, Rafael J. Wysocki wrote:
> From: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
> Subject: SCSI / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM
>
> After commit b2b49ccbdd54 (PM: Kconfig: Set PM_RUNTIME if PM_SLEEP is
> selected) PM_RUNTIME is always set if PM is set, so #ifdef blocks
> depending on CONFIG_PM_RUNTIME may now be changed to depend on
> CONFIG_PM.
>
> Replace CONFIG_PM_RUNTIME with CONFIG_PM everywhere under
> drivers/scsi/ and in include/scsi/scsi_device.h.
>
> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Aaron Lu <aaron.lu@intel.com>
Thanks,
Aaron
> ---
>
> Note: This depends on commit b2b49ccbdd54 (PM: Kconfig: Set PM_RUNTIME if
> PM_SLEEP is selected) which is only in linux-next at the moment (via the
> linux-pm tree).
>
> Please let me know if it is OK to take this one into linux-pm.
>
> ---
> drivers/scsi/scsi_pm.c | 10 ----------
> drivers/scsi/scsi_priv.h | 5 ++---
> drivers/scsi/ufs/ufshcd-pci.c | 11 ++++-------
> drivers/scsi/ufs/ufshcd-pltfrm.c | 11 ++++-------
> include/scsi/scsi_device.h | 4 ++--
> 5 files changed, 12 insertions(+), 29 deletions(-)
>
> Index: linux-pm/include/scsi/scsi_device.h
> ===================================================================
> --- linux-pm.orig/include/scsi/scsi_device.h
> +++ linux-pm/include/scsi/scsi_device.h
> @@ -440,13 +440,13 @@ static inline int scsi_execute_req(struc
> extern void sdev_disable_disk_events(struct scsi_device *sdev);
> extern void sdev_enable_disk_events(struct scsi_device *sdev);
>
> -#ifdef CONFIG_PM_RUNTIME
> +#ifdef CONFIG_PM
> extern int scsi_autopm_get_device(struct scsi_device *);
> extern void scsi_autopm_put_device(struct scsi_device *);
> #else
> static inline int scsi_autopm_get_device(struct scsi_device *d) { return 0; }
> static inline void scsi_autopm_put_device(struct scsi_device *d) {}
> -#endif /* CONFIG_PM_RUNTIME */
> +#endif /* CONFIG_PM */
>
> static inline int __must_check scsi_device_reprobe(struct scsi_device *sdev)
> {
> Index: linux-pm/drivers/scsi/scsi_priv.h
> ===================================================================
> --- linux-pm.orig/drivers/scsi/scsi_priv.h
> +++ linux-pm/drivers/scsi/scsi_priv.h
> @@ -157,8 +157,7 @@ static inline void scsi_netlink_exit(voi
> /* scsi_pm.c */
> #ifdef CONFIG_PM
> extern const struct dev_pm_ops scsi_bus_pm_ops;
> -#endif
> -#ifdef CONFIG_PM_RUNTIME
> +
> extern void scsi_autopm_get_target(struct scsi_target *);
> extern void scsi_autopm_put_target(struct scsi_target *);
> extern int scsi_autopm_get_host(struct Scsi_Host *);
> @@ -168,7 +167,7 @@ static inline void scsi_autopm_get_targe
> static inline void scsi_autopm_put_target(struct scsi_target *t) {}
> static inline int scsi_autopm_get_host(struct Scsi_Host *h) { return 0; }
> static inline void scsi_autopm_put_host(struct Scsi_Host *h) {}
> -#endif /* CONFIG_PM_RUNTIME */
> +#endif /* CONFIG_PM */
>
> extern struct async_domain scsi_sd_pm_domain;
> extern struct async_domain scsi_sd_probe_domain;
> Index: linux-pm/drivers/scsi/scsi_pm.c
> ===================================================================
> --- linux-pm.orig/drivers/scsi/scsi_pm.c
> +++ linux-pm/drivers/scsi/scsi_pm.c
> @@ -213,8 +213,6 @@ static int scsi_bus_restore(struct devic
>
> #endif /* CONFIG_PM_SLEEP */
>
> -#ifdef CONFIG_PM_RUNTIME
> -
> static int sdev_runtime_suspend(struct device *dev)
> {
> const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL;
> @@ -332,14 +330,6 @@ void scsi_autopm_put_host(struct Scsi_Ho
> pm_runtime_put_sync(&shost->shost_gendev);
> }
>
> -#else
> -
> -#define scsi_runtime_suspend NULL
> -#define scsi_runtime_resume NULL
> -#define scsi_runtime_idle NULL
> -
> -#endif /* CONFIG_PM_RUNTIME */
> -
> const struct dev_pm_ops scsi_bus_pm_ops = {
> .prepare = scsi_bus_prepare,
> .suspend = scsi_bus_suspend,
> Index: linux-pm/drivers/scsi/ufs/ufshcd-pci.c
> ===================================================================
> --- linux-pm.orig/drivers/scsi/ufs/ufshcd-pci.c
> +++ linux-pm/drivers/scsi/ufs/ufshcd-pci.c
> @@ -62,12 +62,7 @@ static int ufshcd_pci_resume(struct devi
> {
> return ufshcd_system_resume(dev_get_drvdata(dev));
> }
> -#else
> -#define ufshcd_pci_suspend NULL
> -#define ufshcd_pci_resume NULL
> -#endif /* CONFIG_PM */
>
> -#ifdef CONFIG_PM_RUNTIME
> static int ufshcd_pci_runtime_suspend(struct device *dev)
> {
> return ufshcd_runtime_suspend(dev_get_drvdata(dev));
> @@ -80,11 +75,13 @@ static int ufshcd_pci_runtime_idle(struc
> {
> return ufshcd_runtime_idle(dev_get_drvdata(dev));
> }
> -#else /* !CONFIG_PM_RUNTIME */
> +#else /* !CONFIG_PM */
> +#define ufshcd_pci_suspend NULL
> +#define ufshcd_pci_resume NULL
> #define ufshcd_pci_runtime_suspend NULL
> #define ufshcd_pci_runtime_resume NULL
> #define ufshcd_pci_runtime_idle NULL
> -#endif /* CONFIG_PM_RUNTIME */
> +#endif /* CONFIG_PM */
>
> /**
> * ufshcd_pci_shutdown - main function to put the controller in reset state
> Index: linux-pm/drivers/scsi/ufs/ufshcd-pltfrm.c
> ===================================================================
> --- linux-pm.orig/drivers/scsi/ufs/ufshcd-pltfrm.c
> +++ linux-pm/drivers/scsi/ufs/ufshcd-pltfrm.c
> @@ -266,12 +266,7 @@ static int ufshcd_pltfrm_resume(struct d
> {
> return ufshcd_system_resume(dev_get_drvdata(dev));
> }
> -#else
> -#define ufshcd_pltfrm_suspend NULL
> -#define ufshcd_pltfrm_resume NULL
> -#endif
>
> -#ifdef CONFIG_PM_RUNTIME
> static int ufshcd_pltfrm_runtime_suspend(struct device *dev)
> {
> return ufshcd_runtime_suspend(dev_get_drvdata(dev));
> @@ -284,11 +279,13 @@ static int ufshcd_pltfrm_runtime_idle(st
> {
> return ufshcd_runtime_idle(dev_get_drvdata(dev));
> }
> -#else /* !CONFIG_PM_RUNTIME */
> +#else /* !CONFIG_PM */
> +#define ufshcd_pltfrm_suspend NULL
> +#define ufshcd_pltfrm_resume NULL
> #define ufshcd_pltfrm_runtime_suspend NULL
> #define ufshcd_pltfrm_runtime_resume NULL
> #define ufshcd_pltfrm_runtime_idle NULL
> -#endif /* CONFIG_PM_RUNTIME */
> +#endif /* CONFIG_PM */
>
> static void ufshcd_pltfrm_shutdown(struct platform_device *pdev)
> {
>
next prev parent reply other threads:[~2014-12-10 1:43 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-12-04 1:22 [PATCH] SCSI / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM Rafael J. Wysocki
2014-12-09 6:19 ` Aaron Lu
2014-12-09 21:26 ` Rafael J. Wysocki
2014-12-09 21:47 ` [Update][PATCH] " Rafael J. Wysocki
2014-12-10 1:43 ` Aaron Lu [this message]
2014-12-15 8:22 ` Christoph Hellwig
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5487A548.6070800@intel.com \
--to=aaron.lu@intel.com \
--cc=JBottomley@parallels.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=linux-scsi@vger.kernel.org \
--cc=rjw@rjwysocki.net \
--cc=stern@rowland.harvard.edu \
--cc=vinholikatti@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).