public inbox for linux-scsi@vger.kernel.org
 help / color / mirror / Atom feed
From: Hannes Reinecke <hare@suse.de>
To: Sumit Saxena <sumit.saxena@avagotech.com>, linux-scsi@vger.kernel.org
Cc: thenzl@redhat.com, martin.petersen@oracle.com, hch@infradead.org,
	jbottomley@parallels.com,
	Kashyap Desai <kashyap.desai@avagotech.com>
Subject: Re: [PATCH RESEND 5/18] megaraid_sas : Enhanced few prints
Date: Tue, 21 Apr 2015 13:37:38 +0200	[thread overview]
Message-ID: <55363682.40501@suse.de> (raw)
In-Reply-To: <3ea794ac482bde7a204b62a0e3865f17@mail.gmail.com>

On 04/21/2015 01:15 PM, Sumit Saxena wrote:
>> -----Original Message-----
>> From: Hannes Reinecke [mailto:hare@suse.de]
>> Sent: Tuesday, April 21, 2015 3:54 PM
>> To: Sumit.Saxena@avagotech.com; linux-scsi@vger.kernel.org
>> Cc: thenzl@redhat.com; martin.petersen@oracle.com; hch@infradead.org;
>> jbottomley@parallels.com; kashyap.desai@avagotech.com
>> Subject: Re: [PATCH RESEND 5/18] megaraid_sas : Enhanced few prints
>>
>> On 04/20/2015 02:33 PM, Sumit.Saxena@avagotech.com wrote:
>>> This patch will update few prints.
>>>
>>> Signed-off-by: Sumit Saxena <sumit.saxena@avagotech.com>
>>>
>>> ---
>>>  drivers/scsi/megaraid/megaraid_sas_base.c |   49
> ++++++++++++++---------
>> ------
>>>  1 files changed, 24 insertions(+), 25 deletions(-)
>>>
>>> diff --git a/drivers/scsi/megaraid/megaraid_sas_base.c
>>> b/drivers/scsi/megaraid/megaraid_sas_base.c
>>> index 7f426e0..d8e7075 100644
>>> --- a/drivers/scsi/megaraid/megaraid_sas_base.c
>>> +++ b/drivers/scsi/megaraid/megaraid_sas_base.c
>>> @@ -4091,12 +4091,11 @@ static void
>> megasas_update_ext_vd_details(struct megasas_instance *instance)
>>>  		instance->fw_supported_vd_count = MAX_LOGICAL_DRIVES;
>>>  		instance->fw_supported_pd_count =
>> MAX_PHYSICAL_DEVICES;
>>>  	}
>>> -	dev_info(&instance->pdev->dev, "Firmware supports %d VD %d
>> PD\n",
>>> -		instance->fw_supported_vd_count,
>>> -		instance->fw_supported_pd_count);
>>> -	dev_info(&instance->pdev->dev, "Driver supports %d VD  %d PD\n",
>>> -		instance->drv_supported_vd_count,
>>> -		instance->drv_supported_pd_count);
>>> +
>>> +	dev_info(&instance->pdev->dev,
>>> +		"firmware type\t: %s\n",
>>> +		instance->supportmax256vd ? "Extended VD(240
>> VD)firmware" :
>>> +		"Legacy(64 VD) firmware");
>>>
>>>  	old_map_sz =  sizeof(struct MR_FW_RAID_MAP) +
>>>  				(sizeof(struct MR_LD_SPAN_MAP) *
>>> @@ -4713,9 +4712,6 @@ static int megasas_init_fw(struct
>> megasas_instance *instance)
>>>  		ctrl_info->adapterOperations2.supportUnevenSpans;
>>>  	if (instance->UnevenSpanSupport) {
>>>  		struct fusion_context *fusion = instance->ctrl_context;
>>> -
>>> -		dev_info(&instance->pdev->dev, "FW supports: "
>>> -		"UnevenSpanSupport=%x\n", instance-
>>> UnevenSpanSupport);
>>>  		if (MR_ValidateMapInfo(instance))
>>>  			fusion->fast_path_io = 1;
>>>  		else
>>> @@ -4742,13 +4738,11 @@ static int megasas_init_fw(struct
>> megasas_instance *instance)
>>>  	instance->crash_dump_drv_support =
>>>  		(instance->crash_dump_fw_support &&
>>>  		instance->crash_dump_buf);
>>> -	if (instance->crash_dump_drv_support) {
>>> -		dev_info(&instance->pdev->dev, "Firmware Crash dump "
>>> -			"feature is supported\n");
>>> +	if (instance->crash_dump_drv_support)
>>>  		megasas_set_crash_dump_params(instance,
>>>  			MR_CRASH_BUF_TURN_OFF);
>>>
>>> -	} else {
>>> +	else {
>>>  		if (instance->crash_dump_buf)
>>>  			pci_free_consistent(instance->pdev,
>>>  				CRASH_DMA_BUF_SIZE,
>>> @@ -4759,8 +4753,23 @@ static int megasas_init_fw(struct
>>> megasas_instance *instance)
>>>
>>>  	instance->secure_jbod_support =
>>>  		ctrl_info->adapterOperations3.supportSecurityonJBOD;
>>> -	if (instance->secure_jbod_support)
>>> -		dev_info(&instance->pdev->dev, "Firmware supports Secure
>> JBOD\n");
>>> +
>>> +	dev_info(&instance->pdev->dev,
>>> +		"pci id\t\t: (0x%04x)/(0x%04x)/(0x%04x)/(0x%04x)\n",
>>> +		le16_to_cpu(ctrl_info->pci.vendor_id),
>>> +		le16_to_cpu(ctrl_info->pci.device_id),
>>> +		le16_to_cpu(ctrl_info->pci.sub_vendor_id),
>>> +		le16_to_cpu(ctrl_info->pci.sub_device_id));
>>> +	dev_info(&instance->pdev->dev, "unevenspan support	:
>> %s\n",
>>> +		instance->UnevenSpanSupport ? "yes" : "no");
>>> +	dev_info(&instance->pdev->dev, "disable ocr		: %s\n",
>>> +		instance->disableOnlineCtrlReset ? "yes" : "no");
>>> +	dev_info(&instance->pdev->dev, "firmware crash dump	:
>> %s\n",
>>> +		instance->crash_dump_drv_support ? "yes" : "no");
>>> +	dev_info(&instance->pdev->dev, "secure jbod		: %s\n",
>>> +		instance->secure_jbod_support ? "yes" : "no");
>>> +
>>> +
>> Hmm. This has a good chance of being broken up into several lines (ie one
> line
>> per 'dev_info' call.
>> I'd prefer to have it modified to use one line eg by merging it into one
> call to
>> dev_info().
> 
> Understood.. We can go either way. Can we do it(one call to dev_info()) in
> next updates(not in to be resent patches) to avoid regression/rework for
> patches?

Sure. Nothing critical, but I just wanted to make you aware of this.

Cheers,

Hannes
-- 
Dr. Hannes Reinecke		      zSeries & Storage
hare@suse.de			      +49 911 74053 688
SUSE LINUX Products GmbH, Maxfeldstr. 5, 90409 Nürnberg
GF: J. Hawn, J. Guild, F. Imendörffer, HRB 16746 (AG Nürnberg)
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

      reply	other threads:[~2015-04-21 11:37 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-04-20 12:33 [PATCH RESEND 5/18] megaraid_sas : Enhanced few prints Sumit.Saxena
2015-04-21 10:23 ` Hannes Reinecke
2015-04-21 11:15   ` Sumit Saxena
2015-04-21 11:37     ` Hannes Reinecke [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=55363682.40501@suse.de \
    --to=hare@suse.de \
    --cc=hch@infradead.org \
    --cc=jbottomley@parallels.com \
    --cc=kashyap.desai@avagotech.com \
    --cc=linux-scsi@vger.kernel.org \
    --cc=martin.petersen@oracle.com \
    --cc=sumit.saxena@avagotech.com \
    --cc=thenzl@redhat.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox