public inbox for linux-scsi@vger.kernel.org
 help / color / mirror / Atom feed
From: Tomas Henzl <thenzl@redhat.com>
To: Rajinikanth Pandurangan <Rajinikanth.Pandurangan@pmcs.com>,
	"jbottomley@parallels.com" <jbottomley@parallels.com>,
	"linux-scsi@vger.kernel.org" <linux-scsi@vger.kernel.org>
Cc: "aacraid@pmc-sierra.com" <aacraid@pmc-sierra.com>,
	Harry Yang <Harry.Yang@pmcs.com>, Rich Bono <Rich.Bono@pmcs.com>,
	Mahesh Rajashekhara <Mahesh.Rajashekhara@pmcs.com>,
	Achim Leubner <Achim.Leubner@pmcs.com>,
	Murthy Bhat <Murthy.Bhat@pmcs.com>
Subject: Re: [PATCH V4 10/10] [SCSI] aacraid: Replace pci_enable_msix() with pci_enable_msix_range()
Date: Wed, 22 Jul 2015 17:09:47 +0200	[thread overview]
Message-ID: <55AFB23B.7070407@redhat.com> (raw)
In-Reply-To: <E34C6B6293F0214497D0C55B92526C05EAFF7E6D@BBYEXM02.pmc-sierra.internal>

On 22.7.2015 16:55, Rajinikanth Pandurangan wrote:
> Hello Tomas,
> 
> Yes, in case of failure, we'll fall into msi.
Well ok, if you want support msi-x mode only with exactly 8 msi-x
lines, that's fine...

But because it creates another functional change - (before this patch
also values lower than eight were allowed please split this patch into
two parts. One for replacing pci_enable_msix() with
pci_enable_msix_range() and the other for setting a hard limit to
8 msi-x lines.

-tm

> 
> Thanks,
> -----Original Message-----
> From: Tomas Henzl [mailto:thenzl@redhat.com] 
> Sent: Wednesday, July 22, 2015 6:56 AM
> To: Rajinikanth Pandurangan; jbottomley@parallels.com; linux-scsi@vger.kernel.org
> Cc: aacraid@pmc-sierra.com; Harry Yang; Rich Bono; Mahesh Rajashekhara; Achim Leubner; Murthy Bhat
> Subject: Re: [PATCH V4 10/10] [SCSI] aacraid: Replace pci_enable_msix() with pci_enable_msix_range()
> 
> On 21.7.2015 19:59, rajinikanth.pandurangan@pmcs.com wrote:
>> From: Rajinikanth Pandurangan <rajinikanth.pandurangan@pmcs.com>
>>
>> Description:
>>         As pci_enable_msix() deprecated, replaced with 
>> pci_enable_msix_range()
>>
>> V3 Reviewed/commented by:
>> 	Tomas Henzl <thenzl@redhat.com>
>>
>> Changes from V3:
>> 	Uses pci_enable_msix_range() instead of pci_enable_msix_exact() based 
>> on review comment.
>>
>> Signed-off-by: Rajinikanth Pandurangan 
>> <rajinikanth.pandurangan@pmcs.com>
>> ---
>>  drivers/scsi/aacraid/comminit.c | 20 ++++++--------------
>>  1 file changed, 6 insertions(+), 14 deletions(-)
>>
>> diff --git a/drivers/scsi/aacraid/comminit.c 
>> b/drivers/scsi/aacraid/comminit.c index b4b6088..3ba6e97 100644
>> --- a/drivers/scsi/aacraid/comminit.c
>> +++ b/drivers/scsi/aacraid/comminit.c
>> @@ -338,7 +338,7 @@ static int aac_comm_init(struct aac_dev * dev)
>>  
>>  void aac_define_int_mode(struct aac_dev *dev)  {
>> -	int i, msi_count;
>> +	int i, msi_count, min_msix;
>>  
>>  	msi_count = i = 0;
>>  	/* max. vectors from GET_COMM_PREFERRED_SETTINGS */ @@ -366,22 
>> +366,14 @@ void aac_define_int_mode(struct aac_dev *dev)
>>  
>>  	if (msi_count > 1 &&
>>  	    pci_find_capability(dev->pdev, PCI_CAP_ID_MSIX)) {
>> -		i = pci_enable_msix(dev->pdev,
>> +		min_msix = 8;
> That^ will make the pci-enable function fail on boxes with less than eight num-online-cpus
> 
> -tm
> 
>> +		i = pci_enable_msix_range(dev->pdev,
>>  				    dev->msixentry,
>> +				    min_msix,
>>  				    msi_count);
>> -		 /* Check how many MSIX vectors are allocated */
>> -		if (i >= 0) {
>> +		if (i > 0) {
>>  			dev->msi_enabled = 1;
>> -			if (i) {
>> -				msi_count = i;
>> -				if (pci_enable_msix(dev->pdev,
>> -				    dev->msixentry,
>> -				    msi_count)) {
>> -					dev->msi_enabled = 0;
>> -					printk(KERN_ERR "%s%d: MSIX not supported!! Will try MSI 0x%x.\n",
>> -							dev->name, dev->id, i);
>> -				}
>> -			}
>> +			msi_count = i;
>>  		} else {
>>  			dev->msi_enabled = 0;
>>  			printk(KERN_ERR "%s%d: MSIX not supported!! Will try MSI 0x%x.\n",
>>
> 
> --
> To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> 


  reply	other threads:[~2015-07-22 15:09 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-07-21 17:59 [PATCH V4 00/10] [SCSI] aacraid: Patchset for aacraid driver version 41010 rajinikanth.pandurangan
2015-07-21 17:59 ` [PATCH V4 01/10] [SCSI] aacraid: Fix for logical device name and UID not exposed to the OS rajinikanth.pandurangan
2015-07-21 17:59 ` [PATCH V4 02/10] [SCSI] aacraid: Add Power Management support rajinikanth.pandurangan
2015-07-21 17:59 ` [PATCH V4 03/10] [SCSI] aacraid: Change interrupt mode to MSI for series-6 controller rajinikanth.pandurangan
2015-07-21 17:59 ` [PATCH V4 04/10] [SCSI] aacraid: Enable 64-bit write to controller register rajinikanth.pandurangan
2015-07-21 17:59 ` [PATCH V4 05/10] [SCSI] aacraid: Tune response path if IsFastPath bit set rajinikanth.pandurangan
2015-07-21 17:59 ` [PATCH V4 06/10] [SCSI] aacraid: Reset irq affinity hints before releasing irq rajinikanth.pandurangan
2015-07-21 17:59 ` [PATCH V4 07/10] [SCSI] aacraid: Unblock IOCTLs to controller once system resumed from suspend rajinikanth.pandurangan
2015-07-21 17:59 ` [PATCH V4 08/10] [SCSI] aacraid: Send commit-config to controller firmware rajinikanth.pandurangan
2015-07-21 17:59 ` [PATCH V4 09/10] [SCSI] aacraid: Update driver version rajinikanth.pandurangan
2015-07-21 17:59 ` [PATCH V4 10/10] [SCSI] aacraid: Replace pci_enable_msix() with pci_enable_msix_range() rajinikanth.pandurangan
2015-07-22 13:56   ` Tomas Henzl
2015-07-22 14:55     ` Rajinikanth Pandurangan
2015-07-22 15:09       ` Tomas Henzl [this message]
2015-07-22 16:11         ` Rajinikanth Pandurangan

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=55AFB23B.7070407@redhat.com \
    --to=thenzl@redhat.com \
    --cc=Achim.Leubner@pmcs.com \
    --cc=Harry.Yang@pmcs.com \
    --cc=Mahesh.Rajashekhara@pmcs.com \
    --cc=Murthy.Bhat@pmcs.com \
    --cc=Rajinikanth.Pandurangan@pmcs.com \
    --cc=Rich.Bono@pmcs.com \
    --cc=aacraid@pmc-sierra.com \
    --cc=jbottomley@parallels.com \
    --cc=linux-scsi@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox