[PATCH V6 00/10] [SCSI] aacraid: Patchset for aacraid driver version 41010

[PATCH V6 00/10] [SCSI] aacraid: Patchset for aacraid driver version 41010

[Mahesh Rajashekhara]

This patchset includes the following changes (bug fixes and new feature support) specific to aacraid driver.

V6:
Applied driver update change at the end.
Merged 10 and 11 of V5 into 9 of V6.
AAC_MAX_MSIX definition change.
aac_msi option description and subject change.
Removed 'reviewed-by' tag.

V5:
Splited patch 10 from V4 into 2
Added one more patch to request minimum 2 MSIx.

V4:
Updated code with pci_enable_msix_range instead of exact.

V3:
Increased msleep() time from 1 to 20.
Created new patch for pci_enable_msix() replacement.
Changed subject/description of patch 03.

Mahesh Rajashekhara (10):
  [SCSI] aacraid: Fix for logical device name and UID not exposed to the
    OS
  [SCSI] aacraid: Add Power Management support
  [SCSI] aacraid: Change interrupt mode to MSI for series-6  controller
  [SCSI] aacraid: Enable 64-bit write to controller register
  [SCSI] aacraid: Tune response path if IsFastPath bit set
  [SCSI] aacraid: Reset irq affinity hints before releasing irq
  [SCSI] aacraid: Unblock IOCTLs to controller once system resumed from
    suspend
  [SCSI] aacraid: Send commit-config to controller firmware
  [SCSI] aacraid: Replace pci_enable_msix() with pci_enable_msix_range()
  [SCSI] aacraid: Update driver version

 drivers/scsi/aacraid/aachba.c   | 265 +++++++++++++++++++++-------------------
 drivers/scsi/aacraid/aacraid.h  |  20 ++-
 drivers/scsi/aacraid/comminit.c | 147 +++++++++++-----------
 drivers/scsi/aacraid/commsup.c  | 113 ++++++++++++-----
 drivers/scsi/aacraid/linit.c    | 157 +++++++++++++++++++++++-
 drivers/scsi/aacraid/rx.c       |   1 +
 drivers/scsi/aacraid/sa.c       |   1 +
 drivers/scsi/aacraid/src.c      |  64 +++-------
 8 files changed, 484 insertions(+), 284 deletions(-)

-- 
1.9.3

[PATCH V6 01/10] [SCSI] aacraid: Fix for logical device name and UID not exposed to the OS

[Mahesh Rajashekhara]

Description:
	Driver sends the right size of the response buffer.

Changes from V2:
None

Signed-off-by: Mahesh Rajashekhara <Mahesh.Rajashekhara@pmcs.com>
---
 drivers/scsi/aacraid/aachba.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/scsi/aacraid/aachba.c b/drivers/scsi/aacraid/aachba.c
index 9b3dd6e..fe59b00 100644
--- a/drivers/scsi/aacraid/aachba.c
+++ b/drivers/scsi/aacraid/aachba.c
@@ -570,7 +570,7 @@ static int aac_get_container_name(struct scsi_cmnd * scsicmd)
 
 	status = aac_fib_send(ContainerCommand,
 		  cmd_fibcontext,
-		  sizeof (struct aac_get_name),
+		  sizeof(struct aac_get_name_resp),
 		  FsaNormal,
 		  0, 1,
 		  (fib_callback)get_container_name_callback,
@@ -1052,7 +1052,7 @@ static int aac_get_container_serial(struct scsi_cmnd * scsicmd)
 
 	status = aac_fib_send(ContainerCommand,
 		  cmd_fibcontext,
-		  sizeof (struct aac_get_serial),
+		  sizeof(struct aac_get_serial_resp),
 		  FsaNormal,
 		  0, 1,
 		  (fib_callback) get_container_serial_callback,
-- 
1.9.3

[PATCH V6 02/10] [SCSI] aacraid: Add Power Management support

[Mahesh Rajashekhara]

Description:
	* .suspend() and .resume() routines implemented in the driver
	* aac_release_resources() initiates firmware shutdown
	* aac_acquire_resources re-initializes the host interface

Changes from V2:
Increased msleep(1) to msleep(20)
Reverted pci_enable_msix_exact() to pci_enable_msix() as this change has moved into a separate patch.

Signed-off-by: Mahesh Rajashekhara <Mahesh.Rajashekhara@pmcs.com>
---
 drivers/scsi/aacraid/aacraid.h  |   5 ++
 drivers/scsi/aacraid/comminit.c | 154 ++++++++++++++++++++--------------------
 drivers/scsi/aacraid/linit.c    | 147 ++++++++++++++++++++++++++++++++++++++
 drivers/scsi/aacraid/rx.c       |   1 +
 drivers/scsi/aacraid/sa.c       |   1 +
 drivers/scsi/aacraid/src.c      |   2 +
 6 files changed, 232 insertions(+), 78 deletions(-)

diff --git a/drivers/scsi/aacraid/aacraid.h b/drivers/scsi/aacraid/aacraid.h
index 40fe65c..62b0999 100644
--- a/drivers/scsi/aacraid/aacraid.h
+++ b/drivers/scsi/aacraid/aacraid.h
@@ -547,6 +547,7 @@ struct adapter_ops
 	int  (*adapter_sync_cmd)(struct aac_dev *dev, u32 command, u32 p1, u32 p2, u32 p3, u32 p4, u32 p5, u32 p6, u32 *status, u32 *r1, u32 *r2, u32 *r3, u32 *r4);
 	int  (*adapter_check_health)(struct aac_dev *dev);
 	int  (*adapter_restart)(struct aac_dev *dev, int bled);
+	void (*adapter_start)(struct aac_dev *dev);
 	/* Transport operations */
 	int  (*adapter_ioremap)(struct aac_dev * dev, u32 size);
 	irq_handler_t adapter_intr;
@@ -1247,6 +1248,9 @@ struct aac_dev
 #define aac_adapter_restart(dev,bled) \
 	(dev)->a_ops.adapter_restart(dev,bled)
 
+#define aac_adapter_start(dev) \
+	((dev)->a_ops.adapter_start(dev))
+
 #define aac_adapter_ioremap(dev, size) \
 	(dev)->a_ops.adapter_ioremap(dev, size)
 
@@ -2127,6 +2131,7 @@ int aac_sa_init(struct aac_dev *dev);
 int aac_src_init(struct aac_dev *dev);
 int aac_srcv_init(struct aac_dev *dev);
 int aac_queue_get(struct aac_dev * dev, u32 * index, u32 qid, struct hw_fib * hw_fib, int wait, struct fib * fibptr, unsigned long *nonotify);
+void aac_define_int_mode(struct aac_dev *dev);
 unsigned int aac_response_normal(struct aac_queue * q);
 unsigned int aac_command_normal(struct aac_queue * q);
 unsigned int aac_intr_normal(struct aac_dev *dev, u32 Index,
diff --git a/drivers/scsi/aacraid/comminit.c b/drivers/scsi/aacraid/comminit.c
index 45db84a..45a0a04 100644
--- a/drivers/scsi/aacraid/comminit.c
+++ b/drivers/scsi/aacraid/comminit.c
@@ -43,8 +43,6 @@
 
 #include "aacraid.h"
 
-static void aac_define_int_mode(struct aac_dev *dev);
-
 struct aac_common aac_config = {
 	.irq_mod = 1
 };
@@ -338,6 +336,82 @@ static int aac_comm_init(struct aac_dev * dev)
 	return 0;
 }
 
+void aac_define_int_mode(struct aac_dev *dev)
+{
+	int i, msi_count;
+
+	msi_count = i = 0;
+	/* max. vectors from GET_COMM_PREFERRED_SETTINGS */
+	if (dev->max_msix == 0 ||
+	    dev->pdev->device == PMC_DEVICE_S6 ||
+	    dev->sync_mode) {
+		dev->max_msix = 1;
+		dev->vector_cap =
+			dev->scsi_host_ptr->can_queue +
+			AAC_NUM_MGT_FIB;
+		return;
+	}
+
+	/* Don't bother allocating more MSI-X vectors than cpus */
+	msi_count = min(dev->max_msix,
+		(unsigned int)num_online_cpus());
+
+	dev->max_msix = msi_count;
+
+	if (msi_count > AAC_MAX_MSIX)
+		msi_count = AAC_MAX_MSIX;
+
+	for (i = 0; i < msi_count; i++)
+		dev->msixentry[i].entry = i;
+
+	if (msi_count > 1 &&
+	    pci_find_capability(dev->pdev, PCI_CAP_ID_MSIX)) {
+		i = pci_enable_msix(dev->pdev,
+				    dev->msixentry,
+				    msi_count);
+		 /* Check how many MSIX vectors are allocated */
+		if (i >= 0) {
+			dev->msi_enabled = 1;
+			if (i) {
+				msi_count = i;
+				if (pci_enable_msix(dev->pdev,
+				    dev->msixentry,
+				    msi_count)) {
+					dev->msi_enabled = 0;
+					printk(KERN_ERR "%s%d: MSIX not supported!! Will try MSI 0x%x.\n",
+							dev->name, dev->id, i);
+				}
+			}
+		} else {
+			dev->msi_enabled = 0;
+			printk(KERN_ERR "%s%d: MSIX not supported!! Will try MSI 0x%x.\n",
+					dev->name, dev->id, i);
+		}
+	}
+
+	if (!dev->msi_enabled) {
+		msi_count = 1;
+		i = pci_enable_msi(dev->pdev);
+
+		if (!i) {
+			dev->msi_enabled = 1;
+			dev->msi = 1;
+		} else {
+			printk(KERN_ERR "%s%d: MSI not supported!! Will try INTx 0x%x.\n",
+					dev->name, dev->id, i);
+		}
+	}
+
+	if (!dev->msi_enabled)
+		dev->max_msix = msi_count = 1;
+	else {
+		if (dev->max_msix > msi_count)
+			dev->max_msix = msi_count;
+	}
+	dev->vector_cap =
+		(dev->scsi_host_ptr->can_queue + AAC_NUM_MGT_FIB) /
+		msi_count;
+}
 struct aac_dev *aac_init_adapter(struct aac_dev *dev)
 {
 	u32 status[5];
@@ -508,79 +582,3 @@ struct aac_dev *aac_init_adapter(struct aac_dev *dev)
 	return dev;
 }
 
-static void aac_define_int_mode(struct aac_dev *dev)
-{
-
-	int i, msi_count;
-
-	msi_count = i = 0;
-	/* max. vectors from GET_COMM_PREFERRED_SETTINGS */
-	if (dev->max_msix == 0 ||
-	    dev->pdev->device == PMC_DEVICE_S6 ||
-	    dev->sync_mode) {
-		dev->max_msix = 1;
-		dev->vector_cap =
-			dev->scsi_host_ptr->can_queue +
-			AAC_NUM_MGT_FIB;
-		return;
-	}
-
-	msi_count = min(dev->max_msix,
-		(unsigned int)num_online_cpus());
-
-	dev->max_msix = msi_count;
-
-	if (msi_count > AAC_MAX_MSIX)
-		msi_count = AAC_MAX_MSIX;
-
-	for (i = 0; i < msi_count; i++)
-		dev->msixentry[i].entry = i;
-
-	if (msi_count > 1 &&
-	    pci_find_capability(dev->pdev, PCI_CAP_ID_MSIX)) {
-		i = pci_enable_msix(dev->pdev,
-				    dev->msixentry,
-				    msi_count);
-		 /* Check how many MSIX vectors are allocated */
-		if (i >= 0) {
-			dev->msi_enabled = 1;
-			if (i) {
-				msi_count = i;
-				if (pci_enable_msix(dev->pdev,
-				    dev->msixentry,
-				    msi_count)) {
-					dev->msi_enabled = 0;
-					printk(KERN_ERR "%s%d: MSIX not supported!! Will try MSI 0x%x.\n",
-							dev->name, dev->id, i);
-				}
-			}
-		} else {
-			dev->msi_enabled = 0;
-			printk(KERN_ERR "%s%d: MSIX not supported!! Will try MSI 0x%x.\n",
-					dev->name, dev->id, i);
-		}
-	}
-
-	if (!dev->msi_enabled) {
-		msi_count = 1;
-		i = pci_enable_msi(dev->pdev);
-
-		if (!i) {
-			dev->msi_enabled = 1;
-			dev->msi = 1;
-		} else {
-			printk(KERN_ERR "%s%d: MSI not supported!! Will try INTx 0x%x.\n",
-					dev->name, dev->id, i);
-		}
-	}
-
-	if (!dev->msi_enabled)
-		dev->max_msix = msi_count = 1;
-	else {
-		if (dev->max_msix > msi_count)
-			dev->max_msix = msi_count;
-	}
-	dev->vector_cap =
-		(dev->scsi_host_ptr->can_queue + AAC_NUM_MGT_FIB) /
-		msi_count;
-}
diff --git a/drivers/scsi/aacraid/linit.c b/drivers/scsi/aacraid/linit.c
index 9eec027..37375cf 100644
--- a/drivers/scsi/aacraid/linit.c
+++ b/drivers/scsi/aacraid/linit.c
@@ -1317,6 +1317,149 @@ static int aac_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
 	return error;
 }
 
+#if (defined(CONFIG_PM))
+void aac_release_resources(struct aac_dev *aac)
+{
+	int i;
+
+	aac_adapter_disable_int(aac);
+	if (aac->pdev->device == PMC_DEVICE_S6 ||
+	    aac->pdev->device == PMC_DEVICE_S7 ||
+	    aac->pdev->device == PMC_DEVICE_S8 ||
+	    aac->pdev->device == PMC_DEVICE_S9) {
+		if (aac->max_msix > 1) {
+			for (i = 0; i < aac->max_msix; i++)
+				free_irq(aac->msixentry[i].vector,
+					&(aac->aac_msix[i]));
+		} else {
+			free_irq(aac->pdev->irq, &(aac->aac_msix[0]));
+		}
+	} else {
+		free_irq(aac->pdev->irq, aac);
+	}
+	if (aac->msi)
+		pci_disable_msi(aac->pdev);
+	else if (aac->max_msix > 1)
+		pci_disable_msix(aac->pdev);
+
+}
+
+static int aac_acquire_resources(struct aac_dev *dev)
+{
+	int i, j;
+	int instance = dev->id;
+	const char *name = dev->name;
+	unsigned long status;
+	/*
+	 *	First clear out all interrupts.  Then enable the one's that we
+	 *	can handle.
+	 */
+	while (!((status = src_readl(dev, MUnit.OMR)) & KERNEL_UP_AND_RUNNING)
+		|| status == 0xffffffff)
+			msleep(20);
+
+	aac_adapter_disable_int(dev);
+	aac_adapter_enable_int(dev);
+
+
+	if ((dev->pdev->device == PMC_DEVICE_S7 ||
+	     dev->pdev->device == PMC_DEVICE_S8 ||
+	     dev->pdev->device == PMC_DEVICE_S9))
+		aac_define_int_mode(dev);
+
+	if (dev->msi_enabled)
+		aac_src_access_devreg(dev, AAC_ENABLE_MSIX);
+
+	if (!dev->sync_mode && dev->msi_enabled && dev->max_msix > 1) {
+		for (i = 0; i < dev->max_msix; i++) {
+			dev->aac_msix[i].vector_no = i;
+			dev->aac_msix[i].dev = dev;
+
+			if (request_irq(dev->msixentry[i].vector,
+					dev->a_ops.adapter_intr,
+					0, "aacraid", &(dev->aac_msix[i]))) {
+				printk(KERN_ERR "%s%d: Failed to register IRQ for vector %d.\n",
+						name, instance, i);
+				for (j = 0 ; j < i ; j++)
+					free_irq(dev->msixentry[j].vector,
+						 &(dev->aac_msix[j]));
+				pci_disable_msix(dev->pdev);
+				goto error_iounmap;
+			}
+		}
+	} else {
+		dev->aac_msix[0].vector_no = 0;
+		dev->aac_msix[0].dev = dev;
+
+		if (request_irq(dev->pdev->irq, dev->a_ops.adapter_intr,
+			IRQF_SHARED, "aacraid",
+			&(dev->aac_msix[0])) < 0) {
+			if (dev->msi)
+				pci_disable_msi(dev->pdev);
+			printk(KERN_ERR "%s%d: Interrupt unavailable.\n",
+					name, instance);
+			goto error_iounmap;
+		}
+	}
+
+	aac_adapter_enable_int(dev);
+
+	if (!dev->sync_mode)
+		aac_adapter_start(dev);
+	return 0;
+
+error_iounmap:
+	return -1;
+
+}
+static int aac_suspend(struct pci_dev *pdev, pm_message_t state)
+{
+
+	struct Scsi_Host *shost = pci_get_drvdata(pdev);
+	struct aac_dev *aac = (struct aac_dev *)shost->hostdata;
+
+	scsi_block_requests(shost);
+	aac_send_shutdown(aac);
+
+	aac_release_resources(aac);
+
+	pci_set_drvdata(pdev, shost);
+	pci_save_state(pdev);
+	pci_disable_device(pdev);
+	pci_set_power_state(pdev, pci_choose_state(pdev, state));
+
+	return 0;
+}
+
+static int aac_resume(struct pci_dev *pdev)
+{
+	struct Scsi_Host *shost = pci_get_drvdata(pdev);
+	struct aac_dev *aac = (struct aac_dev *)shost->hostdata;
+	int r;
+
+	pci_set_power_state(pdev, PCI_D0);
+	pci_enable_wake(pdev, PCI_D0, 0);
+	pci_restore_state(pdev);
+	r = pci_enable_device(pdev);
+
+	if (r)
+		goto fail_device;
+
+	pci_set_master(pdev);
+	if (aac_acquire_resources(aac))
+		goto fail_device;
+	scsi_unblock_requests(shost);
+
+	return 0;
+
+fail_device:
+	printk(KERN_INFO "%s%d: resume failed.\n", aac->name, aac->id);
+	scsi_host_put(shost);
+	pci_disable_device(pdev);
+	return -ENODEV;
+}
+#endif
+
 static void aac_shutdown(struct pci_dev *dev)
 {
 	struct Scsi_Host *shost = pci_get_drvdata(dev);
@@ -1356,6 +1499,10 @@ static struct pci_driver aac_pci_driver = {
 	.id_table	= aac_pci_tbl,
 	.probe		= aac_probe_one,
 	.remove		= aac_remove_one,
+#if (defined(CONFIG_PM))
+	.suspend	= aac_suspend,
+	.resume		= aac_resume,
+#endif
 	.shutdown	= aac_shutdown,
 };
 
diff --git a/drivers/scsi/aacraid/rx.c b/drivers/scsi/aacraid/rx.c
index 9570612..ac16380 100644
--- a/drivers/scsi/aacraid/rx.c
+++ b/drivers/scsi/aacraid/rx.c
@@ -623,6 +623,7 @@ int _aac_rx_init(struct aac_dev *dev)
 	dev->a_ops.adapter_sync_cmd = rx_sync_cmd;
 	dev->a_ops.adapter_check_health = aac_rx_check_health;
 	dev->a_ops.adapter_restart = aac_rx_restart_adapter;
+	dev->a_ops.adapter_start = aac_rx_start_adapter;
 
 	/*
 	 *	First clear out all interrupts.  Then enable the one's that we
diff --git a/drivers/scsi/aacraid/sa.c b/drivers/scsi/aacraid/sa.c
index e66477c..869aea2 100644
--- a/drivers/scsi/aacraid/sa.c
+++ b/drivers/scsi/aacraid/sa.c
@@ -372,6 +372,7 @@ int aac_sa_init(struct aac_dev *dev)
 	dev->a_ops.adapter_sync_cmd = sa_sync_cmd;
 	dev->a_ops.adapter_check_health = aac_sa_check_health;
 	dev->a_ops.adapter_restart = aac_sa_restart_adapter;
+	dev->a_ops.adapter_start = aac_sa_start_adapter;
 	dev->a_ops.adapter_intr = aac_sa_intr;
 	dev->a_ops.adapter_deliver = aac_rx_deliver_producer;
 	dev->a_ops.adapter_ioremap = aac_sa_ioremap;
diff --git a/drivers/scsi/aacraid/src.c b/drivers/scsi/aacraid/src.c
index e63cf9f..b147341 100644
--- a/drivers/scsi/aacraid/src.c
+++ b/drivers/scsi/aacraid/src.c
@@ -726,6 +726,7 @@ int aac_src_init(struct aac_dev *dev)
 	dev->a_ops.adapter_sync_cmd = src_sync_cmd;
 	dev->a_ops.adapter_check_health = aac_src_check_health;
 	dev->a_ops.adapter_restart = aac_src_restart_adapter;
+	dev->a_ops.adapter_start = aac_src_start_adapter;
 
 	/*
 	 *	First clear out all interrupts.  Then enable the one's that we
@@ -892,6 +893,7 @@ int aac_srcv_init(struct aac_dev *dev)
 	dev->a_ops.adapter_sync_cmd = src_sync_cmd;
 	dev->a_ops.adapter_check_health = aac_src_check_health;
 	dev->a_ops.adapter_restart = aac_src_restart_adapter;
+	dev->a_ops.adapter_start = aac_src_start_adapter;
 
 	/*
 	 *	First clear out all interrupts.  Then enable the one's that we
-- 
1.9.3

[PATCH V6 03/10] [SCSI] aacraid: Change interrupt mode to MSI for series-6 controller

[Mahesh Rajashekhara]

Description:
	This change always sets MSI interrupt mode for series-6 controller.

Changes from V2:
aac_msi option description and subject change.

Signed-off-by: Mahesh Rajashekhara <Mahesh.Rajashekhara@pmcs.com>
---
 drivers/scsi/aacraid/aachba.c | 2 +-
 drivers/scsi/aacraid/src.c    | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/scsi/aacraid/aachba.c b/drivers/scsi/aacraid/aachba.c
index fe59b00..05f2a02 100644
--- a/drivers/scsi/aacraid/aachba.c
+++ b/drivers/scsi/aacraid/aachba.c
@@ -259,7 +259,7 @@ MODULE_PARM_DESC(commit, "Control whether a COMMIT_CONFIG is issued to the"
 	" 0=off, 1=on");
 module_param_named(msi, aac_msi, int, S_IRUGO|S_IWUSR);
 MODULE_PARM_DESC(msi, "IRQ handling."
-	" 0=PIC(default), 1=MSI, 2=MSI-X(unsupported, uses MSI)");
+	" 0=PIC(default), 1=MSI, 2=MSI-X)");
 module_param(startup_timeout, int, S_IRUGO|S_IWUSR);
 MODULE_PARM_DESC(startup_timeout, "The duration of time in seconds to wait for"
 	" adapter to have it's kernel up and\n"
diff --git a/drivers/scsi/aacraid/src.c b/drivers/scsi/aacraid/src.c
index b147341..eb07b3d 100644
--- a/drivers/scsi/aacraid/src.c
+++ b/drivers/scsi/aacraid/src.c
@@ -742,7 +742,7 @@ int aac_src_init(struct aac_dev *dev)
 	if (dev->comm_interface != AAC_COMM_MESSAGE_TYPE1)
 		goto error_iounmap;
 
-	dev->msi = aac_msi && !pci_enable_msi(dev->pdev);
+	dev->msi = !pci_enable_msi(dev->pdev);
 
 	dev->aac_msix[0].vector_no = 0;
 	dev->aac_msix[0].dev = dev;
-- 
1.9.3

[PATCH V6 04/10] [SCSI] aacraid: Enable 64-bit write to controller register

[Mahesh Rajashekhara]

Description:
	If writeq() not supported, then do atomic two 32bit write

Changes from V2:
None

Signed-off-by: Mahesh Rajashekhara <Mahesh.Rajashekhara@pmcs.com>
---
 drivers/scsi/aacraid/aacraid.h  |  9 +++++++++
 drivers/scsi/aacraid/comminit.c |  1 +
 drivers/scsi/aacraid/src.c      | 12 ++++++++++--
 3 files changed, 20 insertions(+), 2 deletions(-)

diff --git a/drivers/scsi/aacraid/aacraid.h b/drivers/scsi/aacraid/aacraid.h
index 62b0999..e54f597 100644
--- a/drivers/scsi/aacraid/aacraid.h
+++ b/drivers/scsi/aacraid/aacraid.h
@@ -844,6 +844,10 @@ struct src_registers {
 						&((AEP)->regs.src.bar0->CSR))
 #define src_writel(AEP, CSR, value)	writel(value, \
 						&((AEP)->regs.src.bar0->CSR))
+#if defined(writeq)
+#define	src_writeq(AEP, CSR, value)	writeq(value, \
+						&((AEP)->regs.src.bar0->CSR))
+#endif
 
 #define SRC_ODR_SHIFT		12
 #define SRC_IDR_SHIFT		9
@@ -1163,6 +1167,11 @@ struct aac_dev
 	struct fsa_dev_info	*fsa_dev;
 	struct task_struct	*thread;
 	int			cardtype;
+	/*
+	 *This lock will protect the two 32-bit
+	 *writes to the Inbound Queue
+	 */
+	spinlock_t		iq_lock;
 
 	/*
 	 *	The following is the device specific extension.
diff --git a/drivers/scsi/aacraid/comminit.c b/drivers/scsi/aacraid/comminit.c
index 45a0a04..b4b6088 100644
--- a/drivers/scsi/aacraid/comminit.c
+++ b/drivers/scsi/aacraid/comminit.c
@@ -424,6 +424,7 @@ struct aac_dev *aac_init_adapter(struct aac_dev *dev)
 	dev->management_fib_count = 0;
 	spin_lock_init(&dev->manage_lock);
 	spin_lock_init(&dev->sync_lock);
+	spin_lock_init(&dev->iq_lock);
 	dev->max_fib_size = sizeof(struct hw_fib);
 	dev->sg_tablesize = host->sg_tablesize = (dev->max_fib_size
 		- sizeof(struct aac_fibhdr)
diff --git a/drivers/scsi/aacraid/src.c b/drivers/scsi/aacraid/src.c
index eb07b3d..1409a0b 100644
--- a/drivers/scsi/aacraid/src.c
+++ b/drivers/scsi/aacraid/src.c
@@ -447,6 +447,10 @@ static int aac_src_deliver_message(struct fib *fib)
 	u32 fibsize;
 	dma_addr_t address;
 	struct aac_fib_xporthdr *pFibX;
+#if !defined(writeq)
+	unsigned long flags;
+#endif
+
 	u16 hdr_size = le16_to_cpu(fib->hw_fib_va->header.Size);
 
 	atomic_inc(&q->numpending);
@@ -511,10 +515,14 @@ static int aac_src_deliver_message(struct fib *fib)
 			return -EINVAL;
 		address |= fibsize;
 	}
-
+#if defined(writeq)
+	src_writeq(dev, MUnit.IQ_L, (u64)address);
+#else
+	spin_lock_irqsave(&fib->dev->iq_lock, flags);
 	src_writel(dev, MUnit.IQ_H, upper_32_bits(address) & 0xffffffff);
 	src_writel(dev, MUnit.IQ_L, address & 0xffffffff);
-
+	spin_unlock_irqrestore(&fib->dev->iq_lock, flags);
+#endif
 	return 0;
 }
 
-- 
1.9.3

[PATCH V6 05/10] [SCSI] aacraid: Tune response path if IsFastPath bit set

[Mahesh Rajashekhara]

Description:
	If 'IsFastPath' bit is set, then response path assumes no error
	and skips error check.

Changes from V2:
None

Signed-off-by: Mahesh Rajashekhara <Mahesh.Rajashekhara@pmcs.com>
---
 drivers/scsi/aacraid/aachba.c | 259 ++++++++++++++++++++++--------------------
 1 file changed, 137 insertions(+), 122 deletions(-)

diff --git a/drivers/scsi/aacraid/aachba.c b/drivers/scsi/aacraid/aachba.c
index 05f2a02..e4c2437 100644
--- a/drivers/scsi/aacraid/aachba.c
+++ b/drivers/scsi/aacraid/aachba.c
@@ -2977,11 +2977,16 @@ static void aac_srb_callback(void *context, struct fib * fibptr)
 		return;
 
 	BUG_ON(fibptr == NULL);
-
 	dev = fibptr->dev;
 
-	srbreply = (struct aac_srb_reply *) fib_data(fibptr);
+	scsi_dma_unmap(scsicmd);
 
+	/* expose physical device if expose_physicald flag is on */
+	if (scsicmd->cmnd[0] == INQUIRY && !(scsicmd->cmnd[1] & 0x01)
+	  && expose_physicals > 0)
+		aac_expose_phy_device(scsicmd);
+
+	srbreply = (struct aac_srb_reply *) fib_data(fibptr);
 	scsicmd->sense_buffer[0] = '\0';  /* Initialize sense valid flag to false */
 
 	if (fibptr->flags & FIB_CONTEXT_FLAG_FASTRESP) {
@@ -2994,147 +2999,157 @@ static void aac_srb_callback(void *context, struct fib * fibptr)
 		 */
 		scsi_set_resid(scsicmd, scsi_bufflen(scsicmd)
 				   - le32_to_cpu(srbreply->data_xfer_length));
-	}
-
-	scsi_dma_unmap(scsicmd);
-
-	/* expose physical device if expose_physicald flag is on */
-	if (scsicmd->cmnd[0] == INQUIRY && !(scsicmd->cmnd[1] & 0x01)
-	  && expose_physicals > 0)
-		aac_expose_phy_device(scsicmd);
+		/*
+		 * First check the fib status
+		 */
 
-	/*
-	 * First check the fib status
-	 */
+		if (le32_to_cpu(srbreply->status) != ST_OK) {
+			int len;
 
-	if (le32_to_cpu(srbreply->status) != ST_OK){
-		int len;
-		printk(KERN_WARNING "aac_srb_callback: srb failed, status = %d\n", le32_to_cpu(srbreply->status));
-		len = min_t(u32, le32_to_cpu(srbreply->sense_data_size),
-			    SCSI_SENSE_BUFFERSIZE);
-		scsicmd->result = DID_ERROR << 16 | COMMAND_COMPLETE << 8 | SAM_STAT_CHECK_CONDITION;
-		memcpy(scsicmd->sense_buffer, srbreply->sense_data, len);
-	}
+			printk(KERN_WARNING "aac_srb_callback: srb failed, status = %d\n", le32_to_cpu(srbreply->status));
+			len = min_t(u32, le32_to_cpu(srbreply->sense_data_size),
+				    SCSI_SENSE_BUFFERSIZE);
+			scsicmd->result = DID_ERROR << 16
+						| COMMAND_COMPLETE << 8
+						| SAM_STAT_CHECK_CONDITION;
+			memcpy(scsicmd->sense_buffer,
+					srbreply->sense_data, len);
+		}
 
-	/*
-	 * Next check the srb status
-	 */
-	switch( (le32_to_cpu(srbreply->srb_status))&0x3f){
-	case SRB_STATUS_ERROR_RECOVERY:
-	case SRB_STATUS_PENDING:
-	case SRB_STATUS_SUCCESS:
-		scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8;
-		break;
-	case SRB_STATUS_DATA_OVERRUN:
-		switch(scsicmd->cmnd[0]){
-		case  READ_6:
-		case  WRITE_6:
-		case  READ_10:
-		case  WRITE_10:
-		case  READ_12:
-		case  WRITE_12:
-		case  READ_16:
-		case  WRITE_16:
-			if (le32_to_cpu(srbreply->data_xfer_length) < scsicmd->underflow) {
-				printk(KERN_WARNING"aacraid: SCSI CMD underflow\n");
-			} else {
-				printk(KERN_WARNING"aacraid: SCSI CMD Data Overrun\n");
+		/*
+		 * Next check the srb status
+		 */
+		switch ((le32_to_cpu(srbreply->srb_status))&0x3f) {
+		case SRB_STATUS_ERROR_RECOVERY:
+		case SRB_STATUS_PENDING:
+		case SRB_STATUS_SUCCESS:
+			scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8;
+			break;
+		case SRB_STATUS_DATA_OVERRUN:
+			switch (scsicmd->cmnd[0]) {
+			case  READ_6:
+			case  WRITE_6:
+			case  READ_10:
+			case  WRITE_10:
+			case  READ_12:
+			case  WRITE_12:
+			case  READ_16:
+			case  WRITE_16:
+				if (le32_to_cpu(srbreply->data_xfer_length)
+							< scsicmd->underflow)
+					printk(KERN_WARNING"aacraid: SCSI CMD underflow\n");
+				else
+					printk(KERN_WARNING"aacraid: SCSI CMD Data Overrun\n");
+				scsicmd->result = DID_ERROR << 16
+							| COMMAND_COMPLETE << 8;
+				break;
+			case INQUIRY: {
+				scsicmd->result = DID_OK << 16
+							| COMMAND_COMPLETE << 8;
+				break;
+			}
+			default:
+				scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8;
+				break;
 			}
-			scsicmd->result = DID_ERROR << 16 | COMMAND_COMPLETE << 8;
 			break;
-		case INQUIRY: {
-			scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8;
+		case SRB_STATUS_ABORTED:
+			scsicmd->result = DID_ABORT << 16 | ABORT << 8;
 			break;
-		}
-		default:
-			scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8;
+		case SRB_STATUS_ABORT_FAILED:
+			/*
+			 * Not sure about this one - but assuming the
+			 * hba was trying to abort for some reason
+			 */
+			scsicmd->result = DID_ERROR << 16 | ABORT << 8;
+			break;
+		case SRB_STATUS_PARITY_ERROR:
+			scsicmd->result = DID_PARITY << 16
+						| MSG_PARITY_ERROR << 8;
+			break;
+		case SRB_STATUS_NO_DEVICE:
+		case SRB_STATUS_INVALID_PATH_ID:
+		case SRB_STATUS_INVALID_TARGET_ID:
+		case SRB_STATUS_INVALID_LUN:
+		case SRB_STATUS_SELECTION_TIMEOUT:
+			scsicmd->result = DID_NO_CONNECT << 16
+						| COMMAND_COMPLETE << 8;
 			break;
-		}
-		break;
-	case SRB_STATUS_ABORTED:
-		scsicmd->result = DID_ABORT << 16 | ABORT << 8;
-		break;
-	case SRB_STATUS_ABORT_FAILED:
-		// Not sure about this one - but assuming the hba was trying to abort for some reason
-		scsicmd->result = DID_ERROR << 16 | ABORT << 8;
-		break;
-	case SRB_STATUS_PARITY_ERROR:
-		scsicmd->result = DID_PARITY << 16 | MSG_PARITY_ERROR << 8;
-		break;
-	case SRB_STATUS_NO_DEVICE:
-	case SRB_STATUS_INVALID_PATH_ID:
-	case SRB_STATUS_INVALID_TARGET_ID:
-	case SRB_STATUS_INVALID_LUN:
-	case SRB_STATUS_SELECTION_TIMEOUT:
-		scsicmd->result = DID_NO_CONNECT << 16 | COMMAND_COMPLETE << 8;
-		break;
 
-	case SRB_STATUS_COMMAND_TIMEOUT:
-	case SRB_STATUS_TIMEOUT:
-		scsicmd->result = DID_TIME_OUT << 16 | COMMAND_COMPLETE << 8;
-		break;
+		case SRB_STATUS_COMMAND_TIMEOUT:
+		case SRB_STATUS_TIMEOUT:
+			scsicmd->result = DID_TIME_OUT << 16
+						| COMMAND_COMPLETE << 8;
+			break;
 
-	case SRB_STATUS_BUSY:
-		scsicmd->result = DID_BUS_BUSY << 16 | COMMAND_COMPLETE << 8;
-		break;
+		case SRB_STATUS_BUSY:
+			scsicmd->result = DID_BUS_BUSY << 16
+						| COMMAND_COMPLETE << 8;
+			break;
 
-	case SRB_STATUS_BUS_RESET:
-		scsicmd->result = DID_RESET << 16 | COMMAND_COMPLETE << 8;
-		break;
+		case SRB_STATUS_BUS_RESET:
+			scsicmd->result = DID_RESET << 16
+						| COMMAND_COMPLETE << 8;
+			break;
 
-	case SRB_STATUS_MESSAGE_REJECTED:
-		scsicmd->result = DID_ERROR << 16 | MESSAGE_REJECT << 8;
-		break;
-	case SRB_STATUS_REQUEST_FLUSHED:
-	case SRB_STATUS_ERROR:
-	case SRB_STATUS_INVALID_REQUEST:
-	case SRB_STATUS_REQUEST_SENSE_FAILED:
-	case SRB_STATUS_NO_HBA:
-	case SRB_STATUS_UNEXPECTED_BUS_FREE:
-	case SRB_STATUS_PHASE_SEQUENCE_FAILURE:
-	case SRB_STATUS_BAD_SRB_BLOCK_LENGTH:
-	case SRB_STATUS_DELAYED_RETRY:
-	case SRB_STATUS_BAD_FUNCTION:
-	case SRB_STATUS_NOT_STARTED:
-	case SRB_STATUS_NOT_IN_USE:
-	case SRB_STATUS_FORCE_ABORT:
-	case SRB_STATUS_DOMAIN_VALIDATION_FAIL:
-	default:
+		case SRB_STATUS_MESSAGE_REJECTED:
+			scsicmd->result = DID_ERROR << 16
+						| MESSAGE_REJECT << 8;
+			break;
+		case SRB_STATUS_REQUEST_FLUSHED:
+		case SRB_STATUS_ERROR:
+		case SRB_STATUS_INVALID_REQUEST:
+		case SRB_STATUS_REQUEST_SENSE_FAILED:
+		case SRB_STATUS_NO_HBA:
+		case SRB_STATUS_UNEXPECTED_BUS_FREE:
+		case SRB_STATUS_PHASE_SEQUENCE_FAILURE:
+		case SRB_STATUS_BAD_SRB_BLOCK_LENGTH:
+		case SRB_STATUS_DELAYED_RETRY:
+		case SRB_STATUS_BAD_FUNCTION:
+		case SRB_STATUS_NOT_STARTED:
+		case SRB_STATUS_NOT_IN_USE:
+		case SRB_STATUS_FORCE_ABORT:
+		case SRB_STATUS_DOMAIN_VALIDATION_FAIL:
+		default:
 #ifdef AAC_DETAILED_STATUS_INFO
-		printk("aacraid: SRB ERROR(%u) %s scsi cmd 0x%x - scsi status 0x%x\n",
-			le32_to_cpu(srbreply->srb_status) & 0x3F,
-			aac_get_status_string(
-				le32_to_cpu(srbreply->srb_status) & 0x3F),
-			scsicmd->cmnd[0],
-			le32_to_cpu(srbreply->scsi_status));
+			printk(KERN_INFO "aacraid: SRB ERROR(%u) %s scsi cmd 0x%x - scsi status 0x%x\n",
+				le32_to_cpu(srbreply->srb_status) & 0x3F,
+				aac_get_status_string(
+					le32_to_cpu(srbreply->srb_status) & 0x3F),
+				scsicmd->cmnd[0],
+				le32_to_cpu(srbreply->scsi_status));
 #endif
-		if ((scsicmd->cmnd[0] == ATA_12)
-		  || (scsicmd->cmnd[0] == ATA_16)) {
-			if (scsicmd->cmnd[2] & (0x01 << 5)) {
-				scsicmd->result = DID_OK << 16
-						| COMMAND_COMPLETE << 8;
+			if ((scsicmd->cmnd[0] == ATA_12)
+				|| (scsicmd->cmnd[0] == ATA_16)) {
+					if (scsicmd->cmnd[2] & (0x01 << 5)) {
+						scsicmd->result = DID_OK << 16
+							| COMMAND_COMPLETE << 8;
 				break;
+				} else {
+					scsicmd->result = DID_ERROR << 16
+						| COMMAND_COMPLETE << 8;
+					break;
+				}
 			} else {
 				scsicmd->result = DID_ERROR << 16
-						| COMMAND_COMPLETE << 8;
+					| COMMAND_COMPLETE << 8;
 				break;
 			}
-		} else {
-			scsicmd->result = DID_ERROR << 16
-					| COMMAND_COMPLETE << 8;
-			break;
 		}
-	}
-	if (le32_to_cpu(srbreply->scsi_status) == SAM_STAT_CHECK_CONDITION) {
-		int len;
-		scsicmd->result |= SAM_STAT_CHECK_CONDITION;
-		len = min_t(u32, le32_to_cpu(srbreply->sense_data_size),
-			    SCSI_SENSE_BUFFERSIZE);
+		if (le32_to_cpu(srbreply->scsi_status)
+				== SAM_STAT_CHECK_CONDITION) {
+			int len;
+
+			scsicmd->result |= SAM_STAT_CHECK_CONDITION;
+			len = min_t(u32, le32_to_cpu(srbreply->sense_data_size),
+				    SCSI_SENSE_BUFFERSIZE);
 #ifdef AAC_DETAILED_STATUS_INFO
-		printk(KERN_WARNING "aac_srb_callback: check condition, status = %d len=%d\n",
-					le32_to_cpu(srbreply->status), len);
+			printk(KERN_WARNING "aac_srb_callback: check condition, status = %d len=%d\n",
+						le32_to_cpu(srbreply->status), len);
 #endif
-		memcpy(scsicmd->sense_buffer, srbreply->sense_data, len);
+			memcpy(scsicmd->sense_buffer,
+					srbreply->sense_data, len);
+		}
 	}
 	/*
 	 * OR in the scsi status (already shifted up a bit)
-- 
1.9.3

[PATCH V6 06/10] [SCSI] aacraid: Reset irq affinity hints before releasing irq

[Mahesh Rajashekhara]

Description:
	Reset irq affinity hints before releasing IRQ
	Removed duplicate code of IRQ acquire/release

Changes from V2:
None

Signed-off-by: Mahesh Rajashekhara <Mahesh.Rajashekhara@pmcs.com>
---
 drivers/scsi/aacraid/aacraid.h |   2 +
 drivers/scsi/aacraid/commsup.c | 113 ++++++++++++++++++++++++++++++-----------
 drivers/scsi/aacraid/src.c     |  48 ++---------------
 3 files changed, 88 insertions(+), 75 deletions(-)

diff --git a/drivers/scsi/aacraid/aacraid.h b/drivers/scsi/aacraid/aacraid.h
index e54f597..7b95227 100644
--- a/drivers/scsi/aacraid/aacraid.h
+++ b/drivers/scsi/aacraid/aacraid.h
@@ -2110,6 +2110,8 @@ static inline unsigned int cap_to_cyls(sector_t capacity, unsigned divisor)
 #define AAC_OWNER_ERROR_HANDLER	0x103
 #define AAC_OWNER_FIRMWARE	0x106
 
+int aac_acquire_irq(struct aac_dev *dev);
+void aac_free_irq(struct aac_dev *dev);
 const char *aac_driverinfo(struct Scsi_Host *);
 struct fib *aac_fib_alloc(struct aac_dev *dev);
 int aac_fib_setup(struct aac_dev *dev);
diff --git a/drivers/scsi/aacraid/commsup.c b/drivers/scsi/aacraid/commsup.c
index 4da5749..a1f90fe 100644
--- a/drivers/scsi/aacraid/commsup.c
+++ b/drivers/scsi/aacraid/commsup.c
@@ -1270,13 +1270,12 @@ retry_next:
 static int _aac_reset_adapter(struct aac_dev *aac, int forced)
 {
 	int index, quirks;
-	int retval, i;
+	int retval;
 	struct Scsi_Host *host;
 	struct scsi_device *dev;
 	struct scsi_cmnd *command;
 	struct scsi_cmnd *command_list;
 	int jafo = 0;
-	int cpu;
 
 	/*
 	 * Assumptions:
@@ -1339,35 +1338,7 @@ static int _aac_reset_adapter(struct aac_dev *aac, int forced)
 	aac->comm_phys = 0;
 	kfree(aac->queues);
 	aac->queues = NULL;
-	cpu = cpumask_first(cpu_online_mask);
-	if (aac->pdev->device == PMC_DEVICE_S6 ||
-	    aac->pdev->device == PMC_DEVICE_S7 ||
-	    aac->pdev->device == PMC_DEVICE_S8 ||
-	    aac->pdev->device == PMC_DEVICE_S9) {
-		if (aac->max_msix > 1) {
-			for (i = 0; i < aac->max_msix; i++) {
-				if (irq_set_affinity_hint(
-				    aac->msixentry[i].vector,
-				    NULL)) {
-					printk(KERN_ERR "%s%d: Failed to reset IRQ affinity for cpu %d\n",
-						aac->name,
-						aac->id,
-						cpu);
-				}
-				cpu = cpumask_next(cpu,
-						cpu_online_mask);
-				free_irq(aac->msixentry[i].vector,
-					 &(aac->aac_msix[i]));
-			}
-			pci_disable_msix(aac->pdev);
-		} else {
-			free_irq(aac->pdev->irq, &(aac->aac_msix[0]));
-		}
-	} else {
-		free_irq(aac->pdev->irq, aac);
-	}
-	if (aac->msi)
-		pci_disable_msi(aac->pdev);
+	aac_free_irq(aac);
 	kfree(aac->fsa_dev);
 	aac->fsa_dev = NULL;
 	quirks = aac_get_driver_ident(index)->quirks;
@@ -1978,3 +1949,83 @@ int aac_command_thread(void *data)
 	dev->aif_thread = 0;
 	return 0;
 }
+
+int aac_acquire_irq(struct aac_dev *dev)
+{
+	int i;
+	int j;
+	int ret = 0;
+	int cpu;
+
+	cpu = cpumask_first(cpu_online_mask);
+	if (!dev->sync_mode && dev->msi_enabled && dev->max_msix > 1) {
+		for (i = 0; i < dev->max_msix; i++) {
+			dev->aac_msix[i].vector_no = i;
+			dev->aac_msix[i].dev = dev;
+			if (request_irq(dev->msixentry[i].vector,
+					dev->a_ops.adapter_intr,
+					0, "aacraid", &(dev->aac_msix[i]))) {
+				printk(KERN_ERR "%s%d: Failed to register IRQ for vector %d.\n",
+						dev->name, dev->id, i);
+				for (j = 0 ; j < i ; j++)
+					free_irq(dev->msixentry[j].vector,
+						 &(dev->aac_msix[j]));
+				pci_disable_msix(dev->pdev);
+				ret = -1;
+			}
+			if (irq_set_affinity_hint(dev->msixentry[i].vector,
+							get_cpu_mask(cpu))) {
+				printk(KERN_ERR "%s%d: Failed to set IRQ affinity for cpu %d\n",
+					    dev->name, dev->id, cpu);
+			}
+			cpu = cpumask_next(cpu, cpu_online_mask);
+		}
+	} else {
+		dev->aac_msix[0].vector_no = 0;
+		dev->aac_msix[0].dev = dev;
+
+		if (request_irq(dev->pdev->irq, dev->a_ops.adapter_intr,
+			IRQF_SHARED, "aacraid",
+			&(dev->aac_msix[0])) < 0) {
+			if (dev->msi)
+				pci_disable_msi(dev->pdev);
+			printk(KERN_ERR "%s%d: Interrupt unavailable.\n",
+					dev->name, dev->id);
+			ret = -1;
+		}
+	}
+	return ret;
+}
+
+void aac_free_irq(struct aac_dev *dev)
+{
+	int i;
+	int cpu;
+
+	cpu = cpumask_first(cpu_online_mask);
+	if (dev->pdev->device == PMC_DEVICE_S6 ||
+	    dev->pdev->device == PMC_DEVICE_S7 ||
+	    dev->pdev->device == PMC_DEVICE_S8 ||
+	    dev->pdev->device == PMC_DEVICE_S9) {
+		if (dev->max_msix > 1) {
+			for (i = 0; i < dev->max_msix; i++) {
+				if (irq_set_affinity_hint(
+					dev->msixentry[i].vector, NULL)) {
+					printk(KERN_ERR "%s%d: Failed to reset IRQ affinity for cpu %d\n",
+					    dev->name, dev->id, cpu);
+				}
+				cpu = cpumask_next(cpu, cpu_online_mask);
+				free_irq(dev->msixentry[i].vector,
+						&(dev->aac_msix[i]));
+			}
+		} else {
+			free_irq(dev->pdev->irq, &(dev->aac_msix[0]));
+		}
+	} else {
+		free_irq(dev->pdev->irq, dev);
+	}
+	if (dev->msi)
+		pci_disable_msi(dev->pdev);
+	else if (dev->max_msix > 1)
+		pci_disable_msix(dev->pdev);
+}
diff --git a/drivers/scsi/aacraid/src.c b/drivers/scsi/aacraid/src.c
index 1409a0b..2aa34ea 100644
--- a/drivers/scsi/aacraid/src.c
+++ b/drivers/scsi/aacraid/src.c
@@ -798,9 +798,7 @@ int aac_srcv_init(struct aac_dev *dev)
 	unsigned long status;
 	int restart = 0;
 	int instance = dev->id;
-	int i, j;
 	const char *name = dev->name;
-	int cpu;
 
 	dev->a_ops.adapter_ioremap = aac_srcv_ioremap;
 	dev->a_ops.adapter_comm = aac_src_select_comm;
@@ -918,48 +916,10 @@ int aac_srcv_init(struct aac_dev *dev)
 		goto error_iounmap;
 	if (dev->msi_enabled)
 		aac_src_access_devreg(dev, AAC_ENABLE_MSIX);
-	if (!dev->sync_mode && dev->msi_enabled && dev->max_msix > 1) {
-		cpu = cpumask_first(cpu_online_mask);
-		for (i = 0; i < dev->max_msix; i++) {
-			dev->aac_msix[i].vector_no = i;
-			dev->aac_msix[i].dev = dev;
-
-			if (request_irq(dev->msixentry[i].vector,
-					dev->a_ops.adapter_intr,
-					0,
-					"aacraid",
-					&(dev->aac_msix[i]))) {
-				printk(KERN_ERR "%s%d: Failed to register IRQ for vector %d.\n",
-						name, instance, i);
-				for (j = 0 ; j < i ; j++)
-					free_irq(dev->msixentry[j].vector,
-						 &(dev->aac_msix[j]));
-				pci_disable_msix(dev->pdev);
-				goto error_iounmap;
-			}
-			if (irq_set_affinity_hint(
-			   dev->msixentry[i].vector,
-			   get_cpu_mask(cpu))) {
-				printk(KERN_ERR "%s%d: Failed to set IRQ affinity for cpu %d\n",
-						name, instance, cpu);
-			}
-			cpu = cpumask_next(cpu, cpu_online_mask);
-		}
-	} else {
-		dev->aac_msix[0].vector_no = 0;
-		dev->aac_msix[0].dev = dev;
-
-		if (request_irq(dev->pdev->irq, dev->a_ops.adapter_intr,
-				IRQF_SHARED,
-				"aacraid",
-				&(dev->aac_msix[0])) < 0) {
-			if (dev->msi)
-				pci_disable_msi(dev->pdev);
-			printk(KERN_ERR "%s%d: Interrupt unavailable.\n",
-					name, instance);
-			goto error_iounmap;
-		}
-	}
+
+	if (aac_acquire_irq(dev))
+		goto error_iounmap;
+
 	dev->dbg_base = dev->base_start;
 	dev->dbg_base_mapped = dev->base;
 	dev->dbg_size = dev->base_size;
-- 
1.9.3

[PATCH V6 07/10] [SCSI] aacraid: Unblock IOCTLs to controller once system resumed from suspend

[Mahesh Rajashekhara]

Description:
	Driver blocks ioctls once it received shutdown/suspend request during
	suspend/hybernation. This patch unblocks ioctls on resume path.

Changes from V2:
None

Signed-off-by: Mahesh Rajashekhara <Mahesh.Rajashekhara@pmcs.com>
---
 drivers/scsi/aacraid/linit.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/scsi/aacraid/linit.c b/drivers/scsi/aacraid/linit.c
index 37375cf..3b6e5c6 100644
--- a/drivers/scsi/aacraid/linit.c
+++ b/drivers/scsi/aacraid/linit.c
@@ -1448,6 +1448,11 @@ static int aac_resume(struct pci_dev *pdev)
 	pci_set_master(pdev);
 	if (aac_acquire_resources(aac))
 		goto fail_device;
+	/*
+	* reset this flag to unblock ioctl() as it was set at
+	* aac_send_shutdown() to block ioctls from upperlayer
+	*/
+	aac->adapter_shutdown = 0;
 	scsi_unblock_requests(shost);
 
 	return 0;
-- 
1.9.3

[PATCH V6 08/10] [SCSI] aacraid: Send commit-config to controller firmware

[Mahesh Rajashekhara]

Description:
	Controller BIOS/UEFI driver used to send this request.  But for
	IBM-Power system there is no BIOS/UEFI driver.  So this change is
	required for IBM, otherwise controller will be read-only mode.

Changes from V2:
None

Signed-off-by: Mahesh Rajashekhara <Mahesh.Rajashekhara@pmcs.com>
---
 drivers/scsi/aacraid/linit.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/scsi/aacraid/linit.c b/drivers/scsi/aacraid/linit.c
index 3b6e5c6..35dd849 100644
--- a/drivers/scsi/aacraid/linit.c
+++ b/drivers/scsi/aacraid/linit.c
@@ -1270,8 +1270,11 @@ static int aac_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
 		shost->max_channel = aac->maximum_num_channels;
 	else
 		shost->max_channel = 0;
-
+#if defined(__powerpc__) || defined(__PPC__) || defined(__ppc__)
+	aac_get_config_status(aac, 1);
+#else
 	aac_get_config_status(aac, 0);
+#endif
 	aac_get_containers(aac);
 	list_add(&aac->entry, insert);
 
-- 
1.9.3

[PATCH V6 09/10] [SCSI] aacraid: Replace pci_enable_msix() with pci_enable_msix_range()

[Mahesh Rajashekhara]

Description:
	As pci_enable_msix() deprecated, replaced with pci_enable_msix_range()

Changes from V5:
Merged 10 and 11 of V5 into this patch.
AAC_MAX_MSIX definition change.

Signed-off-by: Mahesh Rajashekhara <Mahesh.Rajashekhara@pmcs.com>
---
 drivers/scsi/aacraid/aacraid.h  |  2 +-
 drivers/scsi/aacraid/comminit.c | 20 ++++++--------------
 2 files changed, 7 insertions(+), 15 deletions(-)

diff --git a/drivers/scsi/aacraid/aacraid.h b/drivers/scsi/aacraid/aacraid.h
index 7b95227..2de5ebc 100644
--- a/drivers/scsi/aacraid/aacraid.h
+++ b/drivers/scsi/aacraid/aacraid.h
@@ -12,7 +12,7 @@
  *              D E F I N E S
  *----------------------------------------------------------------------------*/
 
-#define AAC_MAX_MSIX		8	/* vectors */
+#define AAC_MAX_MSIX		32	/* vectors */
 #define AAC_PCI_MSI_ENABLE	0x8000
 
 enum {
diff --git a/drivers/scsi/aacraid/comminit.c b/drivers/scsi/aacraid/comminit.c
index b4b6088..0e954e3 100644
--- a/drivers/scsi/aacraid/comminit.c
+++ b/drivers/scsi/aacraid/comminit.c
@@ -338,7 +338,7 @@ static int aac_comm_init(struct aac_dev * dev)
 
 void aac_define_int_mode(struct aac_dev *dev)
 {
-	int i, msi_count;
+	int i, msi_count, min_msix;
 
 	msi_count = i = 0;
 	/* max. vectors from GET_COMM_PREFERRED_SETTINGS */
@@ -366,22 +366,14 @@ void aac_define_int_mode(struct aac_dev *dev)
 
 	if (msi_count > 1 &&
 	    pci_find_capability(dev->pdev, PCI_CAP_ID_MSIX)) {
-		i = pci_enable_msix(dev->pdev,
+		min_msix = 2;
+		i = pci_enable_msix_range(dev->pdev,
 				    dev->msixentry,
+				    min_msix,
 				    msi_count);
-		 /* Check how many MSIX vectors are allocated */
-		if (i >= 0) {
+		if (i > 0) {
 			dev->msi_enabled = 1;
-			if (i) {
-				msi_count = i;
-				if (pci_enable_msix(dev->pdev,
-				    dev->msixentry,
-				    msi_count)) {
-					dev->msi_enabled = 0;
-					printk(KERN_ERR "%s%d: MSIX not supported!! Will try MSI 0x%x.\n",
-							dev->name, dev->id, i);
-				}
-			}
+			msi_count = i;
 		} else {
 			dev->msi_enabled = 0;
 			printk(KERN_ERR "%s%d: MSIX not supported!! Will try MSI 0x%x.\n",
-- 
1.9.3

[PATCH V6 10/10] [SCSI] aacraid: Update driver version

[Mahesh Rajashekhara]

Signed-off-by: Mahesh Rajashekhara <Mahesh.Rajashekhara@pmcs.com>
---
 drivers/scsi/aacraid/aacraid.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/scsi/aacraid/aacraid.h b/drivers/scsi/aacraid/aacraid.h
index 2de5ebc..074878b 100644
--- a/drivers/scsi/aacraid/aacraid.h
+++ b/drivers/scsi/aacraid/aacraid.h
@@ -62,7 +62,7 @@ enum {
 #define	PMC_GLOBAL_INT_BIT0		0x00000001
 
 #ifndef AAC_DRIVER_BUILD
-# define AAC_DRIVER_BUILD 40709
+# define AAC_DRIVER_BUILD 41010
 # define AAC_DRIVER_BRANCH "-ms"
 #endif
 #define MAXIMUM_NUM_CONTAINERS	32
-- 
1.9.3

RE: [PATCH V6 01/10] [SCSI] aacraid: Fix for logical device name and UID not exposed to the OS

[Karthikeya Sunkesula]

Reviewed-by: Karthikeya Sunkesula <Karthikeya.Sunkesula@pmcs.com>

-----Original Message-----
From: Mahesh Rajashekhara 
Sent: Tuesday, August 11, 2015 11:28 AM
To: Tomas Henzl; JBottomley@Parallels.com; linux-scsi@vger.kernel.org
Cc: aacraid@pmc-sierra.com; Harry Yang; Rich Bono; Mahesh Rajashekhara
Subject: [PATCH V6 01/10] [SCSI] aacraid: Fix for logical device name and UID not exposed to the OS

Description:
	Driver sends the right size of the response buffer.

Changes from V2:
None

Signed-off-by: Mahesh Rajashekhara <Mahesh.Rajashekhara@pmcs.com>
---
 drivers/scsi/aacraid/aachba.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/scsi/aacraid/aachba.c b/drivers/scsi/aacraid/aachba.c index 9b3dd6e..fe59b00 100644
--- a/drivers/scsi/aacraid/aachba.c
+++ b/drivers/scsi/aacraid/aachba.c
@@ -570,7 +570,7 @@ static int aac_get_container_name(struct scsi_cmnd * scsicmd)
 
 	status = aac_fib_send(ContainerCommand,
 		  cmd_fibcontext,
-		  sizeof (struct aac_get_name),
+		  sizeof(struct aac_get_name_resp),
 		  FsaNormal,
 		  0, 1,
 		  (fib_callback)get_container_name_callback,
@@ -1052,7 +1052,7 @@ static int aac_get_container_serial(struct scsi_cmnd * scsicmd)
 
 	status = aac_fib_send(ContainerCommand,
 		  cmd_fibcontext,
-		  sizeof (struct aac_get_serial),
+		  sizeof(struct aac_get_serial_resp),
 		  FsaNormal,
 		  0, 1,
 		  (fib_callback) get_container_serial_callback,
--
1.9.3

RE: [PATCH V6 02/10] [SCSI] aacraid: Add Power Management support

[Karthikeya Sunkesula]

Reviewed-by: Karthikeya Sunkesula <Karthikeya.Sunkesula@pmcs.com>


-----Original Message-----
From: Mahesh Rajashekhara 
Sent: Tuesday, August 11, 2015 11:28 AM
To: Tomas Henzl; JBottomley@Parallels.com; linux-scsi@vger.kernel.org
Cc: aacraid@pmc-sierra.com; Harry Yang; Rich Bono; Mahesh Rajashekhara
Subject: [PATCH V6 02/10] [SCSI] aacraid: Add Power Management support

Description:
	* .suspend() and .resume() routines implemented in the driver
	* aac_release_resources() initiates firmware shutdown
	* aac_acquire_resources re-initializes the host interface

Changes from V2:
Increased msleep(1) to msleep(20)
Reverted pci_enable_msix_exact() to pci_enable_msix() as this change has moved into a separate patch.

Signed-off-by: Mahesh Rajashekhara <Mahesh.Rajashekhara@pmcs.com>
---
 drivers/scsi/aacraid/aacraid.h  |   5 ++
 drivers/scsi/aacraid/comminit.c | 154 ++++++++++++++++++++--------------------
 drivers/scsi/aacraid/linit.c    | 147 ++++++++++++++++++++++++++++++++++++++
 drivers/scsi/aacraid/rx.c       |   1 +
 drivers/scsi/aacraid/sa.c       |   1 +
 drivers/scsi/aacraid/src.c      |   2 +
 6 files changed, 232 insertions(+), 78 deletions(-)

diff --git a/drivers/scsi/aacraid/aacraid.h b/drivers/scsi/aacraid/aacraid.h index 40fe65c..62b0999 100644
--- a/drivers/scsi/aacraid/aacraid.h
+++ b/drivers/scsi/aacraid/aacraid.h
@@ -547,6 +547,7 @@ struct adapter_ops
 	int  (*adapter_sync_cmd)(struct aac_dev *dev, u32 command, u32 p1, u32 p2, u32 p3, u32 p4, u32 p5, u32 p6, u32 *status, u32 *r1, u32 *r2, u32 *r3, u32 *r4);
 	int  (*adapter_check_health)(struct aac_dev *dev);
 	int  (*adapter_restart)(struct aac_dev *dev, int bled);
+	void (*adapter_start)(struct aac_dev *dev);
 	/* Transport operations */
 	int  (*adapter_ioremap)(struct aac_dev * dev, u32 size);
 	irq_handler_t adapter_intr;
@@ -1247,6 +1248,9 @@ struct aac_dev
 #define aac_adapter_restart(dev,bled) \
 	(dev)->a_ops.adapter_restart(dev,bled)
 
+#define aac_adapter_start(dev) \
+	((dev)->a_ops.adapter_start(dev))
+
 #define aac_adapter_ioremap(dev, size) \
 	(dev)->a_ops.adapter_ioremap(dev, size)
 
@@ -2127,6 +2131,7 @@ int aac_sa_init(struct aac_dev *dev);  int aac_src_init(struct aac_dev *dev);  int aac_srcv_init(struct aac_dev *dev);  int aac_queue_get(struct aac_dev * dev, u32 * index, u32 qid, struct hw_fib * hw_fib, int wait, struct fib * fibptr, unsigned long *nonotify);
+void aac_define_int_mode(struct aac_dev *dev);
 unsigned int aac_response_normal(struct aac_queue * q);  unsigned int aac_command_normal(struct aac_queue * q);  unsigned int aac_intr_normal(struct aac_dev *dev, u32 Index, diff --git a/drivers/scsi/aacraid/comminit.c b/drivers/scsi/aacraid/comminit.c index 45db84a..45a0a04 100644
--- a/drivers/scsi/aacraid/comminit.c
+++ b/drivers/scsi/aacraid/comminit.c
@@ -43,8 +43,6 @@
 
 #include "aacraid.h"
 
-static void aac_define_int_mode(struct aac_dev *dev);
-
 struct aac_common aac_config = {
 	.irq_mod = 1
 };
@@ -338,6 +336,82 @@ static int aac_comm_init(struct aac_dev * dev)
 	return 0;
 }
 
+void aac_define_int_mode(struct aac_dev *dev) {
+	int i, msi_count;
+
+	msi_count = i = 0;
+	/* max. vectors from GET_COMM_PREFERRED_SETTINGS */
+	if (dev->max_msix == 0 ||
+	    dev->pdev->device == PMC_DEVICE_S6 ||
+	    dev->sync_mode) {
+		dev->max_msix = 1;
+		dev->vector_cap =
+			dev->scsi_host_ptr->can_queue +
+			AAC_NUM_MGT_FIB;
+		return;
+	}
+
+	/* Don't bother allocating more MSI-X vectors than cpus */
+	msi_count = min(dev->max_msix,
+		(unsigned int)num_online_cpus());
+
+	dev->max_msix = msi_count;
+
+	if (msi_count > AAC_MAX_MSIX)
+		msi_count = AAC_MAX_MSIX;
+
+	for (i = 0; i < msi_count; i++)
+		dev->msixentry[i].entry = i;
+
+	if (msi_count > 1 &&
+	    pci_find_capability(dev->pdev, PCI_CAP_ID_MSIX)) {
+		i = pci_enable_msix(dev->pdev,
+				    dev->msixentry,
+				    msi_count);
+		 /* Check how many MSIX vectors are allocated */
+		if (i >= 0) {
+			dev->msi_enabled = 1;
+			if (i) {
+				msi_count = i;
+				if (pci_enable_msix(dev->pdev,
+				    dev->msixentry,
+				    msi_count)) {
+					dev->msi_enabled = 0;
+					printk(KERN_ERR "%s%d: MSIX not supported!! Will try MSI 0x%x.\n",
+							dev->name, dev->id, i);
+				}
+			}
+		} else {
+			dev->msi_enabled = 0;
+			printk(KERN_ERR "%s%d: MSIX not supported!! Will try MSI 0x%x.\n",
+					dev->name, dev->id, i);
+		}
+	}
+
+	if (!dev->msi_enabled) {
+		msi_count = 1;
+		i = pci_enable_msi(dev->pdev);
+
+		if (!i) {
+			dev->msi_enabled = 1;
+			dev->msi = 1;
+		} else {
+			printk(KERN_ERR "%s%d: MSI not supported!! Will try INTx 0x%x.\n",
+					dev->name, dev->id, i);
+		}
+	}
+
+	if (!dev->msi_enabled)
+		dev->max_msix = msi_count = 1;
+	else {
+		if (dev->max_msix > msi_count)
+			dev->max_msix = msi_count;
+	}
+	dev->vector_cap =
+		(dev->scsi_host_ptr->can_queue + AAC_NUM_MGT_FIB) /
+		msi_count;
+}
 struct aac_dev *aac_init_adapter(struct aac_dev *dev)  {
 	u32 status[5];
@@ -508,79 +582,3 @@ struct aac_dev *aac_init_adapter(struct aac_dev *dev)
 	return dev;
 }
 
-static void aac_define_int_mode(struct aac_dev *dev) -{
-
-	int i, msi_count;
-
-	msi_count = i = 0;
-	/* max. vectors from GET_COMM_PREFERRED_SETTINGS */
-	if (dev->max_msix == 0 ||
-	    dev->pdev->device == PMC_DEVICE_S6 ||
-	    dev->sync_mode) {
-		dev->max_msix = 1;
-		dev->vector_cap =
-			dev->scsi_host_ptr->can_queue +
-			AAC_NUM_MGT_FIB;
-		return;
-	}
-
-	msi_count = min(dev->max_msix,
-		(unsigned int)num_online_cpus());
-
-	dev->max_msix = msi_count;
-
-	if (msi_count > AAC_MAX_MSIX)
-		msi_count = AAC_MAX_MSIX;
-
-	for (i = 0; i < msi_count; i++)
-		dev->msixentry[i].entry = i;
-
-	if (msi_count > 1 &&
-	    pci_find_capability(dev->pdev, PCI_CAP_ID_MSIX)) {
-		i = pci_enable_msix(dev->pdev,
-				    dev->msixentry,
-				    msi_count);
-		 /* Check how many MSIX vectors are allocated */
-		if (i >= 0) {
-			dev->msi_enabled = 1;
-			if (i) {
-				msi_count = i;
-				if (pci_enable_msix(dev->pdev,
-				    dev->msixentry,
-				    msi_count)) {
-					dev->msi_enabled = 0;
-					printk(KERN_ERR "%s%d: MSIX not supported!! Will try MSI 0x%x.\n",
-							dev->name, dev->id, i);
-				}
-			}
-		} else {
-			dev->msi_enabled = 0;
-			printk(KERN_ERR "%s%d: MSIX not supported!! Will try MSI 0x%x.\n",
-					dev->name, dev->id, i);
-		}
-	}
-
-	if (!dev->msi_enabled) {
-		msi_count = 1;
-		i = pci_enable_msi(dev->pdev);
-
-		if (!i) {
-			dev->msi_enabled = 1;
-			dev->msi = 1;
-		} else {
-			printk(KERN_ERR "%s%d: MSI not supported!! Will try INTx 0x%x.\n",
-					dev->name, dev->id, i);
-		}
-	}
-
-	if (!dev->msi_enabled)
-		dev->max_msix = msi_count = 1;
-	else {
-		if (dev->max_msix > msi_count)
-			dev->max_msix = msi_count;
-	}
-	dev->vector_cap =
-		(dev->scsi_host_ptr->can_queue + AAC_NUM_MGT_FIB) /
-		msi_count;
-}
diff --git a/drivers/scsi/aacraid/linit.c b/drivers/scsi/aacraid/linit.c index 9eec027..37375cf 100644
--- a/drivers/scsi/aacraid/linit.c
+++ b/drivers/scsi/aacraid/linit.c
@@ -1317,6 +1317,149 @@ static int aac_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
 	return error;
 }
 
+#if (defined(CONFIG_PM))
+void aac_release_resources(struct aac_dev *aac) {
+	int i;
+
+	aac_adapter_disable_int(aac);
+	if (aac->pdev->device == PMC_DEVICE_S6 ||
+	    aac->pdev->device == PMC_DEVICE_S7 ||
+	    aac->pdev->device == PMC_DEVICE_S8 ||
+	    aac->pdev->device == PMC_DEVICE_S9) {
+		if (aac->max_msix > 1) {
+			for (i = 0; i < aac->max_msix; i++)
+				free_irq(aac->msixentry[i].vector,
+					&(aac->aac_msix[i]));
+		} else {
+			free_irq(aac->pdev->irq, &(aac->aac_msix[0]));
+		}
+	} else {
+		free_irq(aac->pdev->irq, aac);
+	}
+	if (aac->msi)
+		pci_disable_msi(aac->pdev);
+	else if (aac->max_msix > 1)
+		pci_disable_msix(aac->pdev);
+
+}
+
+static int aac_acquire_resources(struct aac_dev *dev) {
+	int i, j;
+	int instance = dev->id;
+	const char *name = dev->name;
+	unsigned long status;
+	/*
+	 *	First clear out all interrupts.  Then enable the one's that we
+	 *	can handle.
+	 */
+	while (!((status = src_readl(dev, MUnit.OMR)) & KERNEL_UP_AND_RUNNING)
+		|| status == 0xffffffff)
+			msleep(20);
+
+	aac_adapter_disable_int(dev);
+	aac_adapter_enable_int(dev);
+
+
+	if ((dev->pdev->device == PMC_DEVICE_S7 ||
+	     dev->pdev->device == PMC_DEVICE_S8 ||
+	     dev->pdev->device == PMC_DEVICE_S9))
+		aac_define_int_mode(dev);
+
+	if (dev->msi_enabled)
+		aac_src_access_devreg(dev, AAC_ENABLE_MSIX);
+
+	if (!dev->sync_mode && dev->msi_enabled && dev->max_msix > 1) {
+		for (i = 0; i < dev->max_msix; i++) {
+			dev->aac_msix[i].vector_no = i;
+			dev->aac_msix[i].dev = dev;
+
+			if (request_irq(dev->msixentry[i].vector,
+					dev->a_ops.adapter_intr,
+					0, "aacraid", &(dev->aac_msix[i]))) {
+				printk(KERN_ERR "%s%d: Failed to register IRQ for vector %d.\n",
+						name, instance, i);
+				for (j = 0 ; j < i ; j++)
+					free_irq(dev->msixentry[j].vector,
+						 &(dev->aac_msix[j]));
+				pci_disable_msix(dev->pdev);
+				goto error_iounmap;
+			}
+		}
+	} else {
+		dev->aac_msix[0].vector_no = 0;
+		dev->aac_msix[0].dev = dev;
+
+		if (request_irq(dev->pdev->irq, dev->a_ops.adapter_intr,
+			IRQF_SHARED, "aacraid",
+			&(dev->aac_msix[0])) < 0) {
+			if (dev->msi)
+				pci_disable_msi(dev->pdev);
+			printk(KERN_ERR "%s%d: Interrupt unavailable.\n",
+					name, instance);
+			goto error_iounmap;
+		}
+	}
+
+	aac_adapter_enable_int(dev);
+
+	if (!dev->sync_mode)
+		aac_adapter_start(dev);
+	return 0;
+
+error_iounmap:
+	return -1;
+
+}
+static int aac_suspend(struct pci_dev *pdev, pm_message_t state) {
+
+	struct Scsi_Host *shost = pci_get_drvdata(pdev);
+	struct aac_dev *aac = (struct aac_dev *)shost->hostdata;
+
+	scsi_block_requests(shost);
+	aac_send_shutdown(aac);
+
+	aac_release_resources(aac);
+
+	pci_set_drvdata(pdev, shost);
+	pci_save_state(pdev);
+	pci_disable_device(pdev);
+	pci_set_power_state(pdev, pci_choose_state(pdev, state));
+
+	return 0;
+}
+
+static int aac_resume(struct pci_dev *pdev) {
+	struct Scsi_Host *shost = pci_get_drvdata(pdev);
+	struct aac_dev *aac = (struct aac_dev *)shost->hostdata;
+	int r;
+
+	pci_set_power_state(pdev, PCI_D0);
+	pci_enable_wake(pdev, PCI_D0, 0);
+	pci_restore_state(pdev);
+	r = pci_enable_device(pdev);
+
+	if (r)
+		goto fail_device;
+
+	pci_set_master(pdev);
+	if (aac_acquire_resources(aac))
+		goto fail_device;
+	scsi_unblock_requests(shost);
+
+	return 0;
+
+fail_device:
+	printk(KERN_INFO "%s%d: resume failed.\n", aac->name, aac->id);
+	scsi_host_put(shost);
+	pci_disable_device(pdev);
+	return -ENODEV;
+}
+#endif
+
 static void aac_shutdown(struct pci_dev *dev)  {
 	struct Scsi_Host *shost = pci_get_drvdata(dev); @@ -1356,6 +1499,10 @@ static struct pci_driver aac_pci_driver = {
 	.id_table	= aac_pci_tbl,
 	.probe		= aac_probe_one,
 	.remove		= aac_remove_one,
+#if (defined(CONFIG_PM))
+	.suspend	= aac_suspend,
+	.resume		= aac_resume,
+#endif
 	.shutdown	= aac_shutdown,
 };
 
diff --git a/drivers/scsi/aacraid/rx.c b/drivers/scsi/aacraid/rx.c index 9570612..ac16380 100644
--- a/drivers/scsi/aacraid/rx.c
+++ b/drivers/scsi/aacraid/rx.c
@@ -623,6 +623,7 @@ int _aac_rx_init(struct aac_dev *dev)
 	dev->a_ops.adapter_sync_cmd = rx_sync_cmd;
 	dev->a_ops.adapter_check_health = aac_rx_check_health;
 	dev->a_ops.adapter_restart = aac_rx_restart_adapter;
+	dev->a_ops.adapter_start = aac_rx_start_adapter;
 
 	/*
 	 *	First clear out all interrupts.  Then enable the one's that we
diff --git a/drivers/scsi/aacraid/sa.c b/drivers/scsi/aacraid/sa.c index e66477c..869aea2 100644
--- a/drivers/scsi/aacraid/sa.c
+++ b/drivers/scsi/aacraid/sa.c
@@ -372,6 +372,7 @@ int aac_sa_init(struct aac_dev *dev)
 	dev->a_ops.adapter_sync_cmd = sa_sync_cmd;
 	dev->a_ops.adapter_check_health = aac_sa_check_health;
 	dev->a_ops.adapter_restart = aac_sa_restart_adapter;
+	dev->a_ops.adapter_start = aac_sa_start_adapter;
 	dev->a_ops.adapter_intr = aac_sa_intr;
 	dev->a_ops.adapter_deliver = aac_rx_deliver_producer;
 	dev->a_ops.adapter_ioremap = aac_sa_ioremap; diff --git a/drivers/scsi/aacraid/src.c b/drivers/scsi/aacraid/src.c index e63cf9f..b147341 100644
--- a/drivers/scsi/aacraid/src.c
+++ b/drivers/scsi/aacraid/src.c
@@ -726,6 +726,7 @@ int aac_src_init(struct aac_dev *dev)
 	dev->a_ops.adapter_sync_cmd = src_sync_cmd;
 	dev->a_ops.adapter_check_health = aac_src_check_health;
 	dev->a_ops.adapter_restart = aac_src_restart_adapter;
+	dev->a_ops.adapter_start = aac_src_start_adapter;
 
 	/*
 	 *	First clear out all interrupts.  Then enable the one's that we
@@ -892,6 +893,7 @@ int aac_srcv_init(struct aac_dev *dev)
 	dev->a_ops.adapter_sync_cmd = src_sync_cmd;
 	dev->a_ops.adapter_check_health = aac_src_check_health;
 	dev->a_ops.adapter_restart = aac_src_restart_adapter;
+	dev->a_ops.adapter_start = aac_src_start_adapter;
 
 	/*
 	 *	First clear out all interrupts.  Then enable the one's that we
--
1.9.3

RE: [PATCH V6 03/10] [SCSI] aacraid: Change interrupt mode to MSI for series-6 controller

[Karthikeya Sunkesula]

Reviewed-by: Karthikeya Sunkesula <Karthikeya.Sunkesula@pmcs.com>


-----Original Message-----
From: Mahesh Rajashekhara 
Sent: Tuesday, August 11, 2015 11:28 AM
To: Tomas Henzl; JBottomley@Parallels.com; linux-scsi@vger.kernel.org
Cc: aacraid@pmc-sierra.com; Harry Yang; Rich Bono; Mahesh Rajashekhara
Subject: [PATCH V6 03/10] [SCSI] aacraid: Change interrupt mode to MSI for series-6 controller

Description:
	This change always sets MSI interrupt mode for series-6 controller.

Changes from V2:
aac_msi option description and subject change.

Signed-off-by: Mahesh Rajashekhara <Mahesh.Rajashekhara@pmcs.com>
---
 drivers/scsi/aacraid/aachba.c | 2 +-
 drivers/scsi/aacraid/src.c    | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/scsi/aacraid/aachba.c b/drivers/scsi/aacraid/aachba.c index fe59b00..05f2a02 100644
--- a/drivers/scsi/aacraid/aachba.c
+++ b/drivers/scsi/aacraid/aachba.c
@@ -259,7 +259,7 @@ MODULE_PARM_DESC(commit, "Control whether a COMMIT_CONFIG is issued to the"
 	" 0=off, 1=on");
 module_param_named(msi, aac_msi, int, S_IRUGO|S_IWUSR);  MODULE_PARM_DESC(msi, "IRQ handling."
-	" 0=PIC(default), 1=MSI, 2=MSI-X(unsupported, uses MSI)");
+	" 0=PIC(default), 1=MSI, 2=MSI-X)");
 module_param(startup_timeout, int, S_IRUGO|S_IWUSR);  MODULE_PARM_DESC(startup_timeout, "The duration of time in seconds to wait for"
 	" adapter to have it's kernel up and\n"
diff --git a/drivers/scsi/aacraid/src.c b/drivers/scsi/aacraid/src.c index b147341..eb07b3d 100644
--- a/drivers/scsi/aacraid/src.c
+++ b/drivers/scsi/aacraid/src.c
@@ -742,7 +742,7 @@ int aac_src_init(struct aac_dev *dev)
 	if (dev->comm_interface != AAC_COMM_MESSAGE_TYPE1)
 		goto error_iounmap;
 
-	dev->msi = aac_msi && !pci_enable_msi(dev->pdev);
+	dev->msi = !pci_enable_msi(dev->pdev);
 
 	dev->aac_msix[0].vector_no = 0;
 	dev->aac_msix[0].dev = dev;
--
1.9.3

RE: [PATCH V6 04/10] [SCSI] aacraid: Enable 64-bit write to controller register

[Karthikeya Sunkesula]

Reviewed-by: Karthikeya Sunkesula <Karthikeya.Sunkesula@pmcs.com>


-----Original Message-----
From: Mahesh Rajashekhara 
Sent: Tuesday, August 11, 2015 11:28 AM
To: Tomas Henzl; JBottomley@Parallels.com; linux-scsi@vger.kernel.org
Cc: aacraid@pmc-sierra.com; Harry Yang; Rich Bono; Mahesh Rajashekhara
Subject: [PATCH V6 04/10] [SCSI] aacraid: Enable 64-bit write to controller register

Description:
	If writeq() not supported, then do atomic two 32bit write

Changes from V2:
None

Signed-off-by: Mahesh Rajashekhara <Mahesh.Rajashekhara@pmcs.com>
---
 drivers/scsi/aacraid/aacraid.h  |  9 +++++++++  drivers/scsi/aacraid/comminit.c |  1 +
 drivers/scsi/aacraid/src.c      | 12 ++++++++++--
 3 files changed, 20 insertions(+), 2 deletions(-)

diff --git a/drivers/scsi/aacraid/aacraid.h b/drivers/scsi/aacraid/aacraid.h index 62b0999..e54f597 100644
--- a/drivers/scsi/aacraid/aacraid.h
+++ b/drivers/scsi/aacraid/aacraid.h
@@ -844,6 +844,10 @@ struct src_registers {
 						&((AEP)->regs.src.bar0->CSR))
 #define src_writel(AEP, CSR, value)	writel(value, \
 						&((AEP)->regs.src.bar0->CSR))
+#if defined(writeq)
+#define	src_writeq(AEP, CSR, value)	writeq(value, \
+						&((AEP)->regs.src.bar0->CSR))
+#endif
 
 #define SRC_ODR_SHIFT		12
 #define SRC_IDR_SHIFT		9
@@ -1163,6 +1167,11 @@ struct aac_dev
 	struct fsa_dev_info	*fsa_dev;
 	struct task_struct	*thread;
 	int			cardtype;
+	/*
+	 *This lock will protect the two 32-bit
+	 *writes to the Inbound Queue
+	 */
+	spinlock_t		iq_lock;
 
 	/*
 	 *	The following is the device specific extension.
diff --git a/drivers/scsi/aacraid/comminit.c b/drivers/scsi/aacraid/comminit.c index 45a0a04..b4b6088 100644
--- a/drivers/scsi/aacraid/comminit.c
+++ b/drivers/scsi/aacraid/comminit.c
@@ -424,6 +424,7 @@ struct aac_dev *aac_init_adapter(struct aac_dev *dev)
 	dev->management_fib_count = 0;
 	spin_lock_init(&dev->manage_lock);
 	spin_lock_init(&dev->sync_lock);
+	spin_lock_init(&dev->iq_lock);
 	dev->max_fib_size = sizeof(struct hw_fib);
 	dev->sg_tablesize = host->sg_tablesize = (dev->max_fib_size
 		- sizeof(struct aac_fibhdr)
diff --git a/drivers/scsi/aacraid/src.c b/drivers/scsi/aacraid/src.c index eb07b3d..1409a0b 100644
--- a/drivers/scsi/aacraid/src.c
+++ b/drivers/scsi/aacraid/src.c
@@ -447,6 +447,10 @@ static int aac_src_deliver_message(struct fib *fib)
 	u32 fibsize;
 	dma_addr_t address;
 	struct aac_fib_xporthdr *pFibX;
+#if !defined(writeq)
+	unsigned long flags;
+#endif
+
 	u16 hdr_size = le16_to_cpu(fib->hw_fib_va->header.Size);
 
 	atomic_inc(&q->numpending);
@@ -511,10 +515,14 @@ static int aac_src_deliver_message(struct fib *fib)
 			return -EINVAL;
 		address |= fibsize;
 	}
-
+#if defined(writeq)
+	src_writeq(dev, MUnit.IQ_L, (u64)address); #else
+	spin_lock_irqsave(&fib->dev->iq_lock, flags);
 	src_writel(dev, MUnit.IQ_H, upper_32_bits(address) & 0xffffffff);
 	src_writel(dev, MUnit.IQ_L, address & 0xffffffff);
-
+	spin_unlock_irqrestore(&fib->dev->iq_lock, flags); #endif
 	return 0;
 }
 
--
1.9.3

RE: [PATCH V6 05/10] [SCSI] aacraid: Tune response path if IsFastPath bit set

[Karthikeya Sunkesula]

Reviewed-by: Karthikeya Sunkesula <Karthikeya.Sunkesula@pmcs.com>


-----Original Message-----
From: Mahesh Rajashekhara 
Sent: Tuesday, August 11, 2015 11:28 AM
To: Tomas Henzl; JBottomley@Parallels.com; linux-scsi@vger.kernel.org
Cc: aacraid@pmc-sierra.com; Harry Yang; Rich Bono; Mahesh Rajashekhara
Subject: [PATCH V6 05/10] [SCSI] aacraid: Tune response path if IsFastPath bit set

Description:
	If 'IsFastPath' bit is set, then response path assumes no error
	and skips error check.

Changes from V2:
None

Signed-off-by: Mahesh Rajashekhara <Mahesh.Rajashekhara@pmcs.com>
---
 drivers/scsi/aacraid/aachba.c | 259 ++++++++++++++++++++++--------------------
 1 file changed, 137 insertions(+), 122 deletions(-)

diff --git a/drivers/scsi/aacraid/aachba.c b/drivers/scsi/aacraid/aachba.c index 05f2a02..e4c2437 100644
--- a/drivers/scsi/aacraid/aachba.c
+++ b/drivers/scsi/aacraid/aachba.c
@@ -2977,11 +2977,16 @@ static void aac_srb_callback(void *context, struct fib * fibptr)
 		return;
 
 	BUG_ON(fibptr == NULL);
-
 	dev = fibptr->dev;
 
-	srbreply = (struct aac_srb_reply *) fib_data(fibptr);
+	scsi_dma_unmap(scsicmd);
 
+	/* expose physical device if expose_physicald flag is on */
+	if (scsicmd->cmnd[0] == INQUIRY && !(scsicmd->cmnd[1] & 0x01)
+	  && expose_physicals > 0)
+		aac_expose_phy_device(scsicmd);
+
+	srbreply = (struct aac_srb_reply *) fib_data(fibptr);
 	scsicmd->sense_buffer[0] = '\0';  /* Initialize sense valid flag to false */
 
 	if (fibptr->flags & FIB_CONTEXT_FLAG_FASTRESP) { @@ -2994,147 +2999,157 @@ static void aac_srb_callback(void *context, struct fib * fibptr)
 		 */
 		scsi_set_resid(scsicmd, scsi_bufflen(scsicmd)
 				   - le32_to_cpu(srbreply->data_xfer_length));
-	}
-
-	scsi_dma_unmap(scsicmd);
-
-	/* expose physical device if expose_physicald flag is on */
-	if (scsicmd->cmnd[0] == INQUIRY && !(scsicmd->cmnd[1] & 0x01)
-	  && expose_physicals > 0)
-		aac_expose_phy_device(scsicmd);
+		/*
+		 * First check the fib status
+		 */
 
-	/*
-	 * First check the fib status
-	 */
+		if (le32_to_cpu(srbreply->status) != ST_OK) {
+			int len;
 
-	if (le32_to_cpu(srbreply->status) != ST_OK){
-		int len;
-		printk(KERN_WARNING "aac_srb_callback: srb failed, status = %d\n", le32_to_cpu(srbreply->status));
-		len = min_t(u32, le32_to_cpu(srbreply->sense_data_size),
-			    SCSI_SENSE_BUFFERSIZE);
-		scsicmd->result = DID_ERROR << 16 | COMMAND_COMPLETE << 8 | SAM_STAT_CHECK_CONDITION;
-		memcpy(scsicmd->sense_buffer, srbreply->sense_data, len);
-	}
+			printk(KERN_WARNING "aac_srb_callback: srb failed, status = %d\n", le32_to_cpu(srbreply->status));
+			len = min_t(u32, le32_to_cpu(srbreply->sense_data_size),
+				    SCSI_SENSE_BUFFERSIZE);
+			scsicmd->result = DID_ERROR << 16
+						| COMMAND_COMPLETE << 8
+						| SAM_STAT_CHECK_CONDITION;
+			memcpy(scsicmd->sense_buffer,
+					srbreply->sense_data, len);
+		}
 
-	/*
-	 * Next check the srb status
-	 */
-	switch( (le32_to_cpu(srbreply->srb_status))&0x3f){
-	case SRB_STATUS_ERROR_RECOVERY:
-	case SRB_STATUS_PENDING:
-	case SRB_STATUS_SUCCESS:
-		scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8;
-		break;
-	case SRB_STATUS_DATA_OVERRUN:
-		switch(scsicmd->cmnd[0]){
-		case  READ_6:
-		case  WRITE_6:
-		case  READ_10:
-		case  WRITE_10:
-		case  READ_12:
-		case  WRITE_12:
-		case  READ_16:
-		case  WRITE_16:
-			if (le32_to_cpu(srbreply->data_xfer_length) < scsicmd->underflow) {
-				printk(KERN_WARNING"aacraid: SCSI CMD underflow\n");
-			} else {
-				printk(KERN_WARNING"aacraid: SCSI CMD Data Overrun\n");
+		/*
+		 * Next check the srb status
+		 */
+		switch ((le32_to_cpu(srbreply->srb_status))&0x3f) {
+		case SRB_STATUS_ERROR_RECOVERY:
+		case SRB_STATUS_PENDING:
+		case SRB_STATUS_SUCCESS:
+			scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8;
+			break;
+		case SRB_STATUS_DATA_OVERRUN:
+			switch (scsicmd->cmnd[0]) {
+			case  READ_6:
+			case  WRITE_6:
+			case  READ_10:
+			case  WRITE_10:
+			case  READ_12:
+			case  WRITE_12:
+			case  READ_16:
+			case  WRITE_16:
+				if (le32_to_cpu(srbreply->data_xfer_length)
+							< scsicmd->underflow)
+					printk(KERN_WARNING"aacraid: SCSI CMD underflow\n");
+				else
+					printk(KERN_WARNING"aacraid: SCSI CMD Data Overrun\n");
+				scsicmd->result = DID_ERROR << 16
+							| COMMAND_COMPLETE << 8;
+				break;
+			case INQUIRY: {
+				scsicmd->result = DID_OK << 16
+							| COMMAND_COMPLETE << 8;
+				break;
+			}
+			default:
+				scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8;
+				break;
 			}
-			scsicmd->result = DID_ERROR << 16 | COMMAND_COMPLETE << 8;
 			break;
-		case INQUIRY: {
-			scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8;
+		case SRB_STATUS_ABORTED:
+			scsicmd->result = DID_ABORT << 16 | ABORT << 8;
 			break;
-		}
-		default:
-			scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8;
+		case SRB_STATUS_ABORT_FAILED:
+			/*
+			 * Not sure about this one - but assuming the
+			 * hba was trying to abort for some reason
+			 */
+			scsicmd->result = DID_ERROR << 16 | ABORT << 8;
+			break;
+		case SRB_STATUS_PARITY_ERROR:
+			scsicmd->result = DID_PARITY << 16
+						| MSG_PARITY_ERROR << 8;
+			break;
+		case SRB_STATUS_NO_DEVICE:
+		case SRB_STATUS_INVALID_PATH_ID:
+		case SRB_STATUS_INVALID_TARGET_ID:
+		case SRB_STATUS_INVALID_LUN:
+		case SRB_STATUS_SELECTION_TIMEOUT:
+			scsicmd->result = DID_NO_CONNECT << 16
+						| COMMAND_COMPLETE << 8;
 			break;
-		}
-		break;
-	case SRB_STATUS_ABORTED:
-		scsicmd->result = DID_ABORT << 16 | ABORT << 8;
-		break;
-	case SRB_STATUS_ABORT_FAILED:
-		// Not sure about this one - but assuming the hba was trying to abort for some reason
-		scsicmd->result = DID_ERROR << 16 | ABORT << 8;
-		break;
-	case SRB_STATUS_PARITY_ERROR:
-		scsicmd->result = DID_PARITY << 16 | MSG_PARITY_ERROR << 8;
-		break;
-	case SRB_STATUS_NO_DEVICE:
-	case SRB_STATUS_INVALID_PATH_ID:
-	case SRB_STATUS_INVALID_TARGET_ID:
-	case SRB_STATUS_INVALID_LUN:
-	case SRB_STATUS_SELECTION_TIMEOUT:
-		scsicmd->result = DID_NO_CONNECT << 16 | COMMAND_COMPLETE << 8;
-		break;
 
-	case SRB_STATUS_COMMAND_TIMEOUT:
-	case SRB_STATUS_TIMEOUT:
-		scsicmd->result = DID_TIME_OUT << 16 | COMMAND_COMPLETE << 8;
-		break;
+		case SRB_STATUS_COMMAND_TIMEOUT:
+		case SRB_STATUS_TIMEOUT:
+			scsicmd->result = DID_TIME_OUT << 16
+						| COMMAND_COMPLETE << 8;
+			break;
 
-	case SRB_STATUS_BUSY:
-		scsicmd->result = DID_BUS_BUSY << 16 | COMMAND_COMPLETE << 8;
-		break;
+		case SRB_STATUS_BUSY:
+			scsicmd->result = DID_BUS_BUSY << 16
+						| COMMAND_COMPLETE << 8;
+			break;
 
-	case SRB_STATUS_BUS_RESET:
-		scsicmd->result = DID_RESET << 16 | COMMAND_COMPLETE << 8;
-		break;
+		case SRB_STATUS_BUS_RESET:
+			scsicmd->result = DID_RESET << 16
+						| COMMAND_COMPLETE << 8;
+			break;
 
-	case SRB_STATUS_MESSAGE_REJECTED:
-		scsicmd->result = DID_ERROR << 16 | MESSAGE_REJECT << 8;
-		break;
-	case SRB_STATUS_REQUEST_FLUSHED:
-	case SRB_STATUS_ERROR:
-	case SRB_STATUS_INVALID_REQUEST:
-	case SRB_STATUS_REQUEST_SENSE_FAILED:
-	case SRB_STATUS_NO_HBA:
-	case SRB_STATUS_UNEXPECTED_BUS_FREE:
-	case SRB_STATUS_PHASE_SEQUENCE_FAILURE:
-	case SRB_STATUS_BAD_SRB_BLOCK_LENGTH:
-	case SRB_STATUS_DELAYED_RETRY:
-	case SRB_STATUS_BAD_FUNCTION:
-	case SRB_STATUS_NOT_STARTED:
-	case SRB_STATUS_NOT_IN_USE:
-	case SRB_STATUS_FORCE_ABORT:
-	case SRB_STATUS_DOMAIN_VALIDATION_FAIL:
-	default:
+		case SRB_STATUS_MESSAGE_REJECTED:
+			scsicmd->result = DID_ERROR << 16
+						| MESSAGE_REJECT << 8;
+			break;
+		case SRB_STATUS_REQUEST_FLUSHED:
+		case SRB_STATUS_ERROR:
+		case SRB_STATUS_INVALID_REQUEST:
+		case SRB_STATUS_REQUEST_SENSE_FAILED:
+		case SRB_STATUS_NO_HBA:
+		case SRB_STATUS_UNEXPECTED_BUS_FREE:
+		case SRB_STATUS_PHASE_SEQUENCE_FAILURE:
+		case SRB_STATUS_BAD_SRB_BLOCK_LENGTH:
+		case SRB_STATUS_DELAYED_RETRY:
+		case SRB_STATUS_BAD_FUNCTION:
+		case SRB_STATUS_NOT_STARTED:
+		case SRB_STATUS_NOT_IN_USE:
+		case SRB_STATUS_FORCE_ABORT:
+		case SRB_STATUS_DOMAIN_VALIDATION_FAIL:
+		default:
 #ifdef AAC_DETAILED_STATUS_INFO
-		printk("aacraid: SRB ERROR(%u) %s scsi cmd 0x%x - scsi status 0x%x\n",
-			le32_to_cpu(srbreply->srb_status) & 0x3F,
-			aac_get_status_string(
-				le32_to_cpu(srbreply->srb_status) & 0x3F),
-			scsicmd->cmnd[0],
-			le32_to_cpu(srbreply->scsi_status));
+			printk(KERN_INFO "aacraid: SRB ERROR(%u) %s scsi cmd 0x%x - scsi status 0x%x\n",
+				le32_to_cpu(srbreply->srb_status) & 0x3F,
+				aac_get_status_string(
+					le32_to_cpu(srbreply->srb_status) & 0x3F),
+				scsicmd->cmnd[0],
+				le32_to_cpu(srbreply->scsi_status));
 #endif
-		if ((scsicmd->cmnd[0] == ATA_12)
-		  || (scsicmd->cmnd[0] == ATA_16)) {
-			if (scsicmd->cmnd[2] & (0x01 << 5)) {
-				scsicmd->result = DID_OK << 16
-						| COMMAND_COMPLETE << 8;
+			if ((scsicmd->cmnd[0] == ATA_12)
+				|| (scsicmd->cmnd[0] == ATA_16)) {
+					if (scsicmd->cmnd[2] & (0x01 << 5)) {
+						scsicmd->result = DID_OK << 16
+							| COMMAND_COMPLETE << 8;
 				break;
+				} else {
+					scsicmd->result = DID_ERROR << 16
+						| COMMAND_COMPLETE << 8;
+					break;
+				}
 			} else {
 				scsicmd->result = DID_ERROR << 16
-						| COMMAND_COMPLETE << 8;
+					| COMMAND_COMPLETE << 8;
 				break;
 			}
-		} else {
-			scsicmd->result = DID_ERROR << 16
-					| COMMAND_COMPLETE << 8;
-			break;
 		}
-	}
-	if (le32_to_cpu(srbreply->scsi_status) == SAM_STAT_CHECK_CONDITION) {
-		int len;
-		scsicmd->result |= SAM_STAT_CHECK_CONDITION;
-		len = min_t(u32, le32_to_cpu(srbreply->sense_data_size),
-			    SCSI_SENSE_BUFFERSIZE);
+		if (le32_to_cpu(srbreply->scsi_status)
+				== SAM_STAT_CHECK_CONDITION) {
+			int len;
+
+			scsicmd->result |= SAM_STAT_CHECK_CONDITION;
+			len = min_t(u32, le32_to_cpu(srbreply->sense_data_size),
+				    SCSI_SENSE_BUFFERSIZE);
 #ifdef AAC_DETAILED_STATUS_INFO
-		printk(KERN_WARNING "aac_srb_callback: check condition, status = %d len=%d\n",
-					le32_to_cpu(srbreply->status), len);
+			printk(KERN_WARNING "aac_srb_callback: check condition, status = %d len=%d\n",
+						le32_to_cpu(srbreply->status), len);
 #endif
-		memcpy(scsicmd->sense_buffer, srbreply->sense_data, len);
+			memcpy(scsicmd->sense_buffer,
+					srbreply->sense_data, len);
+		}
 	}
 	/*
 	 * OR in the scsi status (already shifted up a bit)
--
1.9.3

RE: [PATCH V6 06/10] [SCSI] aacraid: Reset irq affinity hints before releasing irq

[Karthikeya Sunkesula]

Reviewed-by: Karthikeya Sunkesula <Karthikeya.Sunkesula@pmcs.com>


-----Original Message-----
From: Mahesh Rajashekhara 
Sent: Tuesday, August 11, 2015 11:28 AM
To: Tomas Henzl; JBottomley@Parallels.com; linux-scsi@vger.kernel.org
Cc: aacraid@pmc-sierra.com; Harry Yang; Rich Bono; Mahesh Rajashekhara
Subject: [PATCH V6 06/10] [SCSI] aacraid: Reset irq affinity hints before releasing irq

Description:
	Reset irq affinity hints before releasing IRQ
	Removed duplicate code of IRQ acquire/release

Changes from V2:
None

Signed-off-by: Mahesh Rajashekhara <Mahesh.Rajashekhara@pmcs.com>
---
 drivers/scsi/aacraid/aacraid.h |   2 +
 drivers/scsi/aacraid/commsup.c | 113 ++++++++++++++++++++++++++++++-----------
 drivers/scsi/aacraid/src.c     |  48 ++---------------
 3 files changed, 88 insertions(+), 75 deletions(-)

diff --git a/drivers/scsi/aacraid/aacraid.h b/drivers/scsi/aacraid/aacraid.h index e54f597..7b95227 100644
--- a/drivers/scsi/aacraid/aacraid.h
+++ b/drivers/scsi/aacraid/aacraid.h
@@ -2110,6 +2110,8 @@ static inline unsigned int cap_to_cyls(sector_t capacity, unsigned divisor)
 #define AAC_OWNER_ERROR_HANDLER	0x103
 #define AAC_OWNER_FIRMWARE	0x106
 
+int aac_acquire_irq(struct aac_dev *dev); void aac_free_irq(struct 
+aac_dev *dev);
 const char *aac_driverinfo(struct Scsi_Host *);  struct fib *aac_fib_alloc(struct aac_dev *dev);  int aac_fib_setup(struct aac_dev *dev); diff --git a/drivers/scsi/aacraid/commsup.c b/drivers/scsi/aacraid/commsup.c index 4da5749..a1f90fe 100644
--- a/drivers/scsi/aacraid/commsup.c
+++ b/drivers/scsi/aacraid/commsup.c
@@ -1270,13 +1270,12 @@ retry_next:
 static int _aac_reset_adapter(struct aac_dev *aac, int forced)  {
 	int index, quirks;
-	int retval, i;
+	int retval;
 	struct Scsi_Host *host;
 	struct scsi_device *dev;
 	struct scsi_cmnd *command;
 	struct scsi_cmnd *command_list;
 	int jafo = 0;
-	int cpu;
 
 	/*
 	 * Assumptions:
@@ -1339,35 +1338,7 @@ static int _aac_reset_adapter(struct aac_dev *aac, int forced)
 	aac->comm_phys = 0;
 	kfree(aac->queues);
 	aac->queues = NULL;
-	cpu = cpumask_first(cpu_online_mask);
-	if (aac->pdev->device == PMC_DEVICE_S6 ||
-	    aac->pdev->device == PMC_DEVICE_S7 ||
-	    aac->pdev->device == PMC_DEVICE_S8 ||
-	    aac->pdev->device == PMC_DEVICE_S9) {
-		if (aac->max_msix > 1) {
-			for (i = 0; i < aac->max_msix; i++) {
-				if (irq_set_affinity_hint(
-				    aac->msixentry[i].vector,
-				    NULL)) {
-					printk(KERN_ERR "%s%d: Failed to reset IRQ affinity for cpu %d\n",
-						aac->name,
-						aac->id,
-						cpu);
-				}
-				cpu = cpumask_next(cpu,
-						cpu_online_mask);
-				free_irq(aac->msixentry[i].vector,
-					 &(aac->aac_msix[i]));
-			}
-			pci_disable_msix(aac->pdev);
-		} else {
-			free_irq(aac->pdev->irq, &(aac->aac_msix[0]));
-		}
-	} else {
-		free_irq(aac->pdev->irq, aac);
-	}
-	if (aac->msi)
-		pci_disable_msi(aac->pdev);
+	aac_free_irq(aac);
 	kfree(aac->fsa_dev);
 	aac->fsa_dev = NULL;
 	quirks = aac_get_driver_ident(index)->quirks;
@@ -1978,3 +1949,83 @@ int aac_command_thread(void *data)
 	dev->aif_thread = 0;
 	return 0;
 }
+
+int aac_acquire_irq(struct aac_dev *dev) {
+	int i;
+	int j;
+	int ret = 0;
+	int cpu;
+
+	cpu = cpumask_first(cpu_online_mask);
+	if (!dev->sync_mode && dev->msi_enabled && dev->max_msix > 1) {
+		for (i = 0; i < dev->max_msix; i++) {
+			dev->aac_msix[i].vector_no = i;
+			dev->aac_msix[i].dev = dev;
+			if (request_irq(dev->msixentry[i].vector,
+					dev->a_ops.adapter_intr,
+					0, "aacraid", &(dev->aac_msix[i]))) {
+				printk(KERN_ERR "%s%d: Failed to register IRQ for vector %d.\n",
+						dev->name, dev->id, i);
+				for (j = 0 ; j < i ; j++)
+					free_irq(dev->msixentry[j].vector,
+						 &(dev->aac_msix[j]));
+				pci_disable_msix(dev->pdev);
+				ret = -1;
+			}
+			if (irq_set_affinity_hint(dev->msixentry[i].vector,
+							get_cpu_mask(cpu))) {
+				printk(KERN_ERR "%s%d: Failed to set IRQ affinity for cpu %d\n",
+					    dev->name, dev->id, cpu);
+			}
+			cpu = cpumask_next(cpu, cpu_online_mask);
+		}
+	} else {
+		dev->aac_msix[0].vector_no = 0;
+		dev->aac_msix[0].dev = dev;
+
+		if (request_irq(dev->pdev->irq, dev->a_ops.adapter_intr,
+			IRQF_SHARED, "aacraid",
+			&(dev->aac_msix[0])) < 0) {
+			if (dev->msi)
+				pci_disable_msi(dev->pdev);
+			printk(KERN_ERR "%s%d: Interrupt unavailable.\n",
+					dev->name, dev->id);
+			ret = -1;
+		}
+	}
+	return ret;
+}
+
+void aac_free_irq(struct aac_dev *dev)
+{
+	int i;
+	int cpu;
+
+	cpu = cpumask_first(cpu_online_mask);
+	if (dev->pdev->device == PMC_DEVICE_S6 ||
+	    dev->pdev->device == PMC_DEVICE_S7 ||
+	    dev->pdev->device == PMC_DEVICE_S8 ||
+	    dev->pdev->device == PMC_DEVICE_S9) {
+		if (dev->max_msix > 1) {
+			for (i = 0; i < dev->max_msix; i++) {
+				if (irq_set_affinity_hint(
+					dev->msixentry[i].vector, NULL)) {
+					printk(KERN_ERR "%s%d: Failed to reset IRQ affinity for cpu %d\n",
+					    dev->name, dev->id, cpu);
+				}
+				cpu = cpumask_next(cpu, cpu_online_mask);
+				free_irq(dev->msixentry[i].vector,
+						&(dev->aac_msix[i]));
+			}
+		} else {
+			free_irq(dev->pdev->irq, &(dev->aac_msix[0]));
+		}
+	} else {
+		free_irq(dev->pdev->irq, dev);
+	}
+	if (dev->msi)
+		pci_disable_msi(dev->pdev);
+	else if (dev->max_msix > 1)
+		pci_disable_msix(dev->pdev);
+}
diff --git a/drivers/scsi/aacraid/src.c b/drivers/scsi/aacraid/src.c index 1409a0b..2aa34ea 100644
--- a/drivers/scsi/aacraid/src.c
+++ b/drivers/scsi/aacraid/src.c
@@ -798,9 +798,7 @@ int aac_srcv_init(struct aac_dev *dev)
 	unsigned long status;
 	int restart = 0;
 	int instance = dev->id;
-	int i, j;
 	const char *name = dev->name;
-	int cpu;
 
 	dev->a_ops.adapter_ioremap = aac_srcv_ioremap;
 	dev->a_ops.adapter_comm = aac_src_select_comm; @@ -918,48 +916,10 @@ int aac_srcv_init(struct aac_dev *dev)
 		goto error_iounmap;
 	if (dev->msi_enabled)
 		aac_src_access_devreg(dev, AAC_ENABLE_MSIX);
-	if (!dev->sync_mode && dev->msi_enabled && dev->max_msix > 1) {
-		cpu = cpumask_first(cpu_online_mask);
-		for (i = 0; i < dev->max_msix; i++) {
-			dev->aac_msix[i].vector_no = i;
-			dev->aac_msix[i].dev = dev;
-
-			if (request_irq(dev->msixentry[i].vector,
-					dev->a_ops.adapter_intr,
-					0,
-					"aacraid",
-					&(dev->aac_msix[i]))) {
-				printk(KERN_ERR "%s%d: Failed to register IRQ for vector %d.\n",
-						name, instance, i);
-				for (j = 0 ; j < i ; j++)
-					free_irq(dev->msixentry[j].vector,
-						 &(dev->aac_msix[j]));
-				pci_disable_msix(dev->pdev);
-				goto error_iounmap;
-			}
-			if (irq_set_affinity_hint(
-			   dev->msixentry[i].vector,
-			   get_cpu_mask(cpu))) {
-				printk(KERN_ERR "%s%d: Failed to set IRQ affinity for cpu %d\n",
-						name, instance, cpu);
-			}
-			cpu = cpumask_next(cpu, cpu_online_mask);
-		}
-	} else {
-		dev->aac_msix[0].vector_no = 0;
-		dev->aac_msix[0].dev = dev;
-
-		if (request_irq(dev->pdev->irq, dev->a_ops.adapter_intr,
-				IRQF_SHARED,
-				"aacraid",
-				&(dev->aac_msix[0])) < 0) {
-			if (dev->msi)
-				pci_disable_msi(dev->pdev);
-			printk(KERN_ERR "%s%d: Interrupt unavailable.\n",
-					name, instance);
-			goto error_iounmap;
-		}
-	}
+
+	if (aac_acquire_irq(dev))
+		goto error_iounmap;
+
 	dev->dbg_base = dev->base_start;
 	dev->dbg_base_mapped = dev->base;
 	dev->dbg_size = dev->base_size;
--
1.9.3

RE: [PATCH V6 07/10] [SCSI] aacraid: Unblock IOCTLs to controller once system resumed from suspend

[Karthikeya Sunkesula]

Reviewed-by: Karthikeya Sunkesula <Karthikeya.Sunkesula@pmcs.com>


-----Original Message-----
From: Mahesh Rajashekhara 
Sent: Tuesday, August 11, 2015 11:28 AM
To: Tomas Henzl; JBottomley@Parallels.com; linux-scsi@vger.kernel.org
Cc: aacraid@pmc-sierra.com; Harry Yang; Rich Bono; Mahesh Rajashekhara
Subject: [PATCH V6 07/10] [SCSI] aacraid: Unblock IOCTLs to controller once system resumed from suspend

Description:
	Driver blocks ioctls once it received shutdown/suspend request during
	suspend/hybernation. This patch unblocks ioctls on resume path.

Changes from V2:
None

Signed-off-by: Mahesh Rajashekhara <Mahesh.Rajashekhara@pmcs.com>
---
 drivers/scsi/aacraid/linit.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/scsi/aacraid/linit.c b/drivers/scsi/aacraid/linit.c index 37375cf..3b6e5c6 100644
--- a/drivers/scsi/aacraid/linit.c
+++ b/drivers/scsi/aacraid/linit.c
@@ -1448,6 +1448,11 @@ static int aac_resume(struct pci_dev *pdev)
 	pci_set_master(pdev);
 	if (aac_acquire_resources(aac))
 		goto fail_device;
+	/*
+	* reset this flag to unblock ioctl() as it was set at
+	* aac_send_shutdown() to block ioctls from upperlayer
+	*/
+	aac->adapter_shutdown = 0;
 	scsi_unblock_requests(shost);
 
 	return 0;
--
1.9.3

RE: [PATCH V6 08/10] [SCSI] aacraid: Send commit-config to controller firmware

[Karthikeya Sunkesula]

Reviewed-by: Karthikeya Sunkesula <Karthikeya.Sunkesula@pmcs.com>


-----Original Message-----
From: Mahesh Rajashekhara 
Sent: Tuesday, August 11, 2015 11:28 AM
To: Tomas Henzl; JBottomley@Parallels.com; linux-scsi@vger.kernel.org
Cc: aacraid@pmc-sierra.com; Harry Yang; Rich Bono; Mahesh Rajashekhara
Subject: [PATCH V6 08/10] [SCSI] aacraid: Send commit-config to controller firmware

Description:
	Controller BIOS/UEFI driver used to send this request.  But for
	IBM-Power system there is no BIOS/UEFI driver.  So this change is
	required for IBM, otherwise controller will be read-only mode.

Changes from V2:
None

Signed-off-by: Mahesh Rajashekhara <Mahesh.Rajashekhara@pmcs.com>
---
 drivers/scsi/aacraid/linit.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/scsi/aacraid/linit.c b/drivers/scsi/aacraid/linit.c index 3b6e5c6..35dd849 100644
--- a/drivers/scsi/aacraid/linit.c
+++ b/drivers/scsi/aacraid/linit.c
@@ -1270,8 +1270,11 @@ static int aac_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
 		shost->max_channel = aac->maximum_num_channels;
 	else
 		shost->max_channel = 0;
-
+#if defined(__powerpc__) || defined(__PPC__) || defined(__ppc__)
+	aac_get_config_status(aac, 1);
+#else
 	aac_get_config_status(aac, 0);
+#endif
 	aac_get_containers(aac);
 	list_add(&aac->entry, insert);
 
--
1.9.3

RE: [PATCH V6 09/10] [SCSI] aacraid: Replace pci_enable_msix() with pci_enable_msix_range()

[Karthikeya Sunkesula]

Reviewed-by: Karthikeya Sunkesula <Karthikeya.Sunkesula@pmcs.com>


-----Original Message-----
From: Mahesh Rajashekhara 
Sent: Tuesday, August 11, 2015 11:28 AM
To: Tomas Henzl; JBottomley@Parallels.com; linux-scsi@vger.kernel.org
Cc: aacraid@pmc-sierra.com; Harry Yang; Rich Bono; Mahesh Rajashekhara
Subject: [PATCH V6 09/10] [SCSI] aacraid: Replace pci_enable_msix() with pci_enable_msix_range()

Description:
	As pci_enable_msix() deprecated, replaced with pci_enable_msix_range()

Changes from V5:
Merged 10 and 11 of V5 into this patch.
AAC_MAX_MSIX definition change.

Signed-off-by: Mahesh Rajashekhara <Mahesh.Rajashekhara@pmcs.com>
---
 drivers/scsi/aacraid/aacraid.h  |  2 +-  drivers/scsi/aacraid/comminit.c | 20 ++++++--------------
 2 files changed, 7 insertions(+), 15 deletions(-)

diff --git a/drivers/scsi/aacraid/aacraid.h b/drivers/scsi/aacraid/aacraid.h index 7b95227..2de5ebc 100644
--- a/drivers/scsi/aacraid/aacraid.h
+++ b/drivers/scsi/aacraid/aacraid.h
@@ -12,7 +12,7 @@
  *              D E F I N E S
  *----------------------------------------------------------------------------*/
 
-#define AAC_MAX_MSIX		8	/* vectors */
+#define AAC_MAX_MSIX		32	/* vectors */
 #define AAC_PCI_MSI_ENABLE	0x8000
 
 enum {
diff --git a/drivers/scsi/aacraid/comminit.c b/drivers/scsi/aacraid/comminit.c index b4b6088..0e954e3 100644
--- a/drivers/scsi/aacraid/comminit.c
+++ b/drivers/scsi/aacraid/comminit.c
@@ -338,7 +338,7 @@ static int aac_comm_init(struct aac_dev * dev)
 
 void aac_define_int_mode(struct aac_dev *dev)  {
-	int i, msi_count;
+	int i, msi_count, min_msix;
 
 	msi_count = i = 0;
 	/* max. vectors from GET_COMM_PREFERRED_SETTINGS */ @@ -366,22 +366,14 @@ void aac_define_int_mode(struct aac_dev *dev)
 
 	if (msi_count > 1 &&
 	    pci_find_capability(dev->pdev, PCI_CAP_ID_MSIX)) {
-		i = pci_enable_msix(dev->pdev,
+		min_msix = 2;
+		i = pci_enable_msix_range(dev->pdev,
 				    dev->msixentry,
+				    min_msix,
 				    msi_count);
-		 /* Check how many MSIX vectors are allocated */
-		if (i >= 0) {
+		if (i > 0) {
 			dev->msi_enabled = 1;
-			if (i) {
-				msi_count = i;
-				if (pci_enable_msix(dev->pdev,
-				    dev->msixentry,
-				    msi_count)) {
-					dev->msi_enabled = 0;
-					printk(KERN_ERR "%s%d: MSIX not supported!! Will try MSI 0x%x.\n",
-							dev->name, dev->id, i);
-				}
-			}
+			msi_count = i;
 		} else {
 			dev->msi_enabled = 0;
 			printk(KERN_ERR "%s%d: MSIX not supported!! Will try MSI 0x%x.\n",
--
1.9.3

RE: [PATCH V6 10/10] [SCSI] aacraid: Update driver version

[Karthikeya Sunkesula]

Reviewed-by: Karthikeya Sunkesula <Karthikeya.Sunkesula@pmcs.com>


-----Original Message-----
From: Mahesh Rajashekhara 
Sent: Tuesday, August 11, 2015 11:28 AM
To: Tomas Henzl; JBottomley@Parallels.com; linux-scsi@vger.kernel.org
Cc: aacraid@pmc-sierra.com; Harry Yang; Rich Bono; Mahesh Rajashekhara
Subject: [PATCH V6 10/10] [SCSI] aacraid: Update driver version

Signed-off-by: Mahesh Rajashekhara <Mahesh.Rajashekhara@pmcs.com>
---
 drivers/scsi/aacraid/aacraid.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/scsi/aacraid/aacraid.h b/drivers/scsi/aacraid/aacraid.h index 2de5ebc..074878b 100644
--- a/drivers/scsi/aacraid/aacraid.h
+++ b/drivers/scsi/aacraid/aacraid.h
@@ -62,7 +62,7 @@ enum {
 #define	PMC_GLOBAL_INT_BIT0		0x00000001
 
 #ifndef AAC_DRIVER_BUILD
-# define AAC_DRIVER_BUILD 40709
+# define AAC_DRIVER_BUILD 41010
 # define AAC_DRIVER_BRANCH "-ms"
 #endif
 #define MAXIMUM_NUM_CONTAINERS	32
--
1.9.3

RE: [PATCH V6 01/10] [SCSI] aacraid: Fix for logical device name and UID not exposed to the OS

[Murthy Bhat]

Reviewed-by: Murthy Bhat <Murthy.Bhat@pmcs.com>


-----Original Message-----
From: Karthikeya Sunkesula 
Sent: Tuesday, August 25, 2015 11:56 AM
To: Mahesh Rajashekhara; Tomas Henzl; JBottomley@Parallels.com; linux-scsi@vger.kernel.org
Cc: aacraid@pmc-sierra.com; Harry Yang; Rich Bono; Murthy Bhat
Subject: RE: [PATCH V6 01/10] [SCSI] aacraid: Fix for logical device name and UID not exposed to the OS

Reviewed-by: Karthikeya Sunkesula <Karthikeya.Sunkesula@pmcs.com>

-----Original Message-----
From: Mahesh Rajashekhara 
Sent: Tuesday, August 11, 2015 11:28 AM
To: Tomas Henzl; JBottomley@Parallels.com; linux-scsi@vger.kernel.org
Cc: aacraid@pmc-sierra.com; Harry Yang; Rich Bono; Mahesh Rajashekhara
Subject: [PATCH V6 01/10] [SCSI] aacraid: Fix for logical device name and UID not exposed to the OS

Description:
	Driver sends the right size of the response buffer.

Changes from V2:
None

Signed-off-by: Mahesh Rajashekhara <Mahesh.Rajashekhara@pmcs.com>
---
 drivers/scsi/aacraid/aachba.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/scsi/aacraid/aachba.c b/drivers/scsi/aacraid/aachba.c index 9b3dd6e..fe59b00 100644
--- a/drivers/scsi/aacraid/aachba.c
+++ b/drivers/scsi/aacraid/aachba.c
@@ -570,7 +570,7 @@ static int aac_get_container_name(struct scsi_cmnd * scsicmd)
 
 	status = aac_fib_send(ContainerCommand,
 		  cmd_fibcontext,
-		  sizeof (struct aac_get_name),
+		  sizeof(struct aac_get_name_resp),
 		  FsaNormal,
 		  0, 1,
 		  (fib_callback)get_container_name_callback,
@@ -1052,7 +1052,7 @@ static int aac_get_container_serial(struct scsi_cmnd * scsicmd)
 
 	status = aac_fib_send(ContainerCommand,
 		  cmd_fibcontext,
-		  sizeof (struct aac_get_serial),
+		  sizeof(struct aac_get_serial_resp),
 		  FsaNormal,
 		  0, 1,
 		  (fib_callback) get_container_serial_callback,
--
1.9.3

RE: [PATCH V6 02/10] [SCSI] aacraid: Add Power Management support

[Murthy Bhat]

Reviewed-by: Murthy Bhat <Murthy.Bhat@pmcs.com>


-----Original Message-----
From: Karthikeya Sunkesula 
Sent: Tuesday, August 25, 2015 11:57 AM
To: Mahesh Rajashekhara; Tomas Henzl; JBottomley@Parallels.com; linux-scsi@vger.kernel.org
Cc: aacraid@pmc-sierra.com; Harry Yang; Rich Bono; Murthy Bhat
Subject: RE: [PATCH V6 02/10] [SCSI] aacraid: Add Power Management support

Reviewed-by: Karthikeya Sunkesula <Karthikeya.Sunkesula@pmcs.com>


-----Original Message-----
From: Mahesh Rajashekhara 
Sent: Tuesday, August 11, 2015 11:28 AM
To: Tomas Henzl; JBottomley@Parallels.com; linux-scsi@vger.kernel.org
Cc: aacraid@pmc-sierra.com; Harry Yang; Rich Bono; Mahesh Rajashekhara
Subject: [PATCH V6 02/10] [SCSI] aacraid: Add Power Management support

Description:
	* .suspend() and .resume() routines implemented in the driver
	* aac_release_resources() initiates firmware shutdown
	* aac_acquire_resources re-initializes the host interface

Changes from V2:
Increased msleep(1) to msleep(20)
Reverted pci_enable_msix_exact() to pci_enable_msix() as this change has moved into a separate patch.

Signed-off-by: Mahesh Rajashekhara <Mahesh.Rajashekhara@pmcs.com>
---
 drivers/scsi/aacraid/aacraid.h  |   5 ++
 drivers/scsi/aacraid/comminit.c | 154 ++++++++++++++++++++--------------------
 drivers/scsi/aacraid/linit.c    | 147 ++++++++++++++++++++++++++++++++++++++
 drivers/scsi/aacraid/rx.c       |   1 +
 drivers/scsi/aacraid/sa.c       |   1 +
 drivers/scsi/aacraid/src.c      |   2 +
 6 files changed, 232 insertions(+), 78 deletions(-)

diff --git a/drivers/scsi/aacraid/aacraid.h b/drivers/scsi/aacraid/aacraid.h index 40fe65c..62b0999 100644
--- a/drivers/scsi/aacraid/aacraid.h
+++ b/drivers/scsi/aacraid/aacraid.h
@@ -547,6 +547,7 @@ struct adapter_ops
 	int  (*adapter_sync_cmd)(struct aac_dev *dev, u32 command, u32 p1, u32 p2, u32 p3, u32 p4, u32 p5, u32 p6, u32 *status, u32 *r1, u32 *r2, u32 *r3, u32 *r4);
 	int  (*adapter_check_health)(struct aac_dev *dev);
 	int  (*adapter_restart)(struct aac_dev *dev, int bled);
+	void (*adapter_start)(struct aac_dev *dev);
 	/* Transport operations */
 	int  (*adapter_ioremap)(struct aac_dev * dev, u32 size);
 	irq_handler_t adapter_intr;
@@ -1247,6 +1248,9 @@ struct aac_dev
 #define aac_adapter_restart(dev,bled) \
 	(dev)->a_ops.adapter_restart(dev,bled)
 
+#define aac_adapter_start(dev) \
+	((dev)->a_ops.adapter_start(dev))
+
 #define aac_adapter_ioremap(dev, size) \
 	(dev)->a_ops.adapter_ioremap(dev, size)
 
@@ -2127,6 +2131,7 @@ int aac_sa_init(struct aac_dev *dev);  int aac_src_init(struct aac_dev *dev);  int aac_srcv_init(struct aac_dev *dev);  int aac_queue_get(struct aac_dev * dev, u32 * index, u32 qid, struct hw_fib * hw_fib, int wait, struct fib * fibptr, unsigned long *nonotify);
+void aac_define_int_mode(struct aac_dev *dev);
 unsigned int aac_response_normal(struct aac_queue * q);  unsigned int aac_command_normal(struct aac_queue * q);  unsigned int aac_intr_normal(struct aac_dev *dev, u32 Index, diff --git a/drivers/scsi/aacraid/comminit.c b/drivers/scsi/aacraid/comminit.c index 45db84a..45a0a04 100644
--- a/drivers/scsi/aacraid/comminit.c
+++ b/drivers/scsi/aacraid/comminit.c
@@ -43,8 +43,6 @@
 
 #include "aacraid.h"
 
-static void aac_define_int_mode(struct aac_dev *dev);
-
 struct aac_common aac_config = {
 	.irq_mod = 1
 };
@@ -338,6 +336,82 @@ static int aac_comm_init(struct aac_dev * dev)
 	return 0;
 }
 
+void aac_define_int_mode(struct aac_dev *dev) {
+	int i, msi_count;
+
+	msi_count = i = 0;
+	/* max. vectors from GET_COMM_PREFERRED_SETTINGS */
+	if (dev->max_msix == 0 ||
+	    dev->pdev->device == PMC_DEVICE_S6 ||
+	    dev->sync_mode) {
+		dev->max_msix = 1;
+		dev->vector_cap =
+			dev->scsi_host_ptr->can_queue +
+			AAC_NUM_MGT_FIB;
+		return;
+	}
+
+	/* Don't bother allocating more MSI-X vectors than cpus */
+	msi_count = min(dev->max_msix,
+		(unsigned int)num_online_cpus());
+
+	dev->max_msix = msi_count;
+
+	if (msi_count > AAC_MAX_MSIX)
+		msi_count = AAC_MAX_MSIX;
+
+	for (i = 0; i < msi_count; i++)
+		dev->msixentry[i].entry = i;
+
+	if (msi_count > 1 &&
+	    pci_find_capability(dev->pdev, PCI_CAP_ID_MSIX)) {
+		i = pci_enable_msix(dev->pdev,
+				    dev->msixentry,
+				    msi_count);
+		 /* Check how many MSIX vectors are allocated */
+		if (i >= 0) {
+			dev->msi_enabled = 1;
+			if (i) {
+				msi_count = i;
+				if (pci_enable_msix(dev->pdev,
+				    dev->msixentry,
+				    msi_count)) {
+					dev->msi_enabled = 0;
+					printk(KERN_ERR "%s%d: MSIX not supported!! Will try MSI 0x%x.\n",
+							dev->name, dev->id, i);
+				}
+			}
+		} else {
+			dev->msi_enabled = 0;
+			printk(KERN_ERR "%s%d: MSIX not supported!! Will try MSI 0x%x.\n",
+					dev->name, dev->id, i);
+		}
+	}
+
+	if (!dev->msi_enabled) {
+		msi_count = 1;
+		i = pci_enable_msi(dev->pdev);
+
+		if (!i) {
+			dev->msi_enabled = 1;
+			dev->msi = 1;
+		} else {
+			printk(KERN_ERR "%s%d: MSI not supported!! Will try INTx 0x%x.\n",
+					dev->name, dev->id, i);
+		}
+	}
+
+	if (!dev->msi_enabled)
+		dev->max_msix = msi_count = 1;
+	else {
+		if (dev->max_msix > msi_count)
+			dev->max_msix = msi_count;
+	}
+	dev->vector_cap =
+		(dev->scsi_host_ptr->can_queue + AAC_NUM_MGT_FIB) /
+		msi_count;
+}
 struct aac_dev *aac_init_adapter(struct aac_dev *dev)  {
 	u32 status[5];
@@ -508,79 +582,3 @@ struct aac_dev *aac_init_adapter(struct aac_dev *dev)
 	return dev;
 }
 
-static void aac_define_int_mode(struct aac_dev *dev) -{
-
-	int i, msi_count;
-
-	msi_count = i = 0;
-	/* max. vectors from GET_COMM_PREFERRED_SETTINGS */
-	if (dev->max_msix == 0 ||
-	    dev->pdev->device == PMC_DEVICE_S6 ||
-	    dev->sync_mode) {
-		dev->max_msix = 1;
-		dev->vector_cap =
-			dev->scsi_host_ptr->can_queue +
-			AAC_NUM_MGT_FIB;
-		return;
-	}
-
-	msi_count = min(dev->max_msix,
-		(unsigned int)num_online_cpus());
-
-	dev->max_msix = msi_count;
-
-	if (msi_count > AAC_MAX_MSIX)
-		msi_count = AAC_MAX_MSIX;
-
-	for (i = 0; i < msi_count; i++)
-		dev->msixentry[i].entry = i;
-
-	if (msi_count > 1 &&
-	    pci_find_capability(dev->pdev, PCI_CAP_ID_MSIX)) {
-		i = pci_enable_msix(dev->pdev,
-				    dev->msixentry,
-				    msi_count);
-		 /* Check how many MSIX vectors are allocated */
-		if (i >= 0) {
-			dev->msi_enabled = 1;
-			if (i) {
-				msi_count = i;
-				if (pci_enable_msix(dev->pdev,
-				    dev->msixentry,
-				    msi_count)) {
-					dev->msi_enabled = 0;
-					printk(KERN_ERR "%s%d: MSIX not supported!! Will try MSI 0x%x.\n",
-							dev->name, dev->id, i);
-				}
-			}
-		} else {
-			dev->msi_enabled = 0;
-			printk(KERN_ERR "%s%d: MSIX not supported!! Will try MSI 0x%x.\n",
-					dev->name, dev->id, i);
-		}
-	}
-
-	if (!dev->msi_enabled) {
-		msi_count = 1;
-		i = pci_enable_msi(dev->pdev);
-
-		if (!i) {
-			dev->msi_enabled = 1;
-			dev->msi = 1;
-		} else {
-			printk(KERN_ERR "%s%d: MSI not supported!! Will try INTx 0x%x.\n",
-					dev->name, dev->id, i);
-		}
-	}
-
-	if (!dev->msi_enabled)
-		dev->max_msix = msi_count = 1;
-	else {
-		if (dev->max_msix > msi_count)
-			dev->max_msix = msi_count;
-	}
-	dev->vector_cap =
-		(dev->scsi_host_ptr->can_queue + AAC_NUM_MGT_FIB) /
-		msi_count;
-}
diff --git a/drivers/scsi/aacraid/linit.c b/drivers/scsi/aacraid/linit.c index 9eec027..37375cf 100644
--- a/drivers/scsi/aacraid/linit.c
+++ b/drivers/scsi/aacraid/linit.c
@@ -1317,6 +1317,149 @@ static int aac_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
 	return error;
 }
 
+#if (defined(CONFIG_PM))
+void aac_release_resources(struct aac_dev *aac) {
+	int i;
+
+	aac_adapter_disable_int(aac);
+	if (aac->pdev->device == PMC_DEVICE_S6 ||
+	    aac->pdev->device == PMC_DEVICE_S7 ||
+	    aac->pdev->device == PMC_DEVICE_S8 ||
+	    aac->pdev->device == PMC_DEVICE_S9) {
+		if (aac->max_msix > 1) {
+			for (i = 0; i < aac->max_msix; i++)
+				free_irq(aac->msixentry[i].vector,
+					&(aac->aac_msix[i]));
+		} else {
+			free_irq(aac->pdev->irq, &(aac->aac_msix[0]));
+		}
+	} else {
+		free_irq(aac->pdev->irq, aac);
+	}
+	if (aac->msi)
+		pci_disable_msi(aac->pdev);
+	else if (aac->max_msix > 1)
+		pci_disable_msix(aac->pdev);
+
+}
+
+static int aac_acquire_resources(struct aac_dev *dev) {
+	int i, j;
+	int instance = dev->id;
+	const char *name = dev->name;
+	unsigned long status;
+	/*
+	 *	First clear out all interrupts.  Then enable the one's that we
+	 *	can handle.
+	 */
+	while (!((status = src_readl(dev, MUnit.OMR)) & KERNEL_UP_AND_RUNNING)
+		|| status == 0xffffffff)
+			msleep(20);
+
+	aac_adapter_disable_int(dev);
+	aac_adapter_enable_int(dev);
+
+
+	if ((dev->pdev->device == PMC_DEVICE_S7 ||
+	     dev->pdev->device == PMC_DEVICE_S8 ||
+	     dev->pdev->device == PMC_DEVICE_S9))
+		aac_define_int_mode(dev);
+
+	if (dev->msi_enabled)
+		aac_src_access_devreg(dev, AAC_ENABLE_MSIX);
+
+	if (!dev->sync_mode && dev->msi_enabled && dev->max_msix > 1) {
+		for (i = 0; i < dev->max_msix; i++) {
+			dev->aac_msix[i].vector_no = i;
+			dev->aac_msix[i].dev = dev;
+
+			if (request_irq(dev->msixentry[i].vector,
+					dev->a_ops.adapter_intr,
+					0, "aacraid", &(dev->aac_msix[i]))) {
+				printk(KERN_ERR "%s%d: Failed to register IRQ for vector %d.\n",
+						name, instance, i);
+				for (j = 0 ; j < i ; j++)
+					free_irq(dev->msixentry[j].vector,
+						 &(dev->aac_msix[j]));
+				pci_disable_msix(dev->pdev);
+				goto error_iounmap;
+			}
+		}
+	} else {
+		dev->aac_msix[0].vector_no = 0;
+		dev->aac_msix[0].dev = dev;
+
+		if (request_irq(dev->pdev->irq, dev->a_ops.adapter_intr,
+			IRQF_SHARED, "aacraid",
+			&(dev->aac_msix[0])) < 0) {
+			if (dev->msi)
+				pci_disable_msi(dev->pdev);
+			printk(KERN_ERR "%s%d: Interrupt unavailable.\n",
+					name, instance);
+			goto error_iounmap;
+		}
+	}
+
+	aac_adapter_enable_int(dev);
+
+	if (!dev->sync_mode)
+		aac_adapter_start(dev);
+	return 0;
+
+error_iounmap:
+	return -1;
+
+}
+static int aac_suspend(struct pci_dev *pdev, pm_message_t state) {
+
+	struct Scsi_Host *shost = pci_get_drvdata(pdev);
+	struct aac_dev *aac = (struct aac_dev *)shost->hostdata;
+
+	scsi_block_requests(shost);
+	aac_send_shutdown(aac);
+
+	aac_release_resources(aac);
+
+	pci_set_drvdata(pdev, shost);
+	pci_save_state(pdev);
+	pci_disable_device(pdev);
+	pci_set_power_state(pdev, pci_choose_state(pdev, state));
+
+	return 0;
+}
+
+static int aac_resume(struct pci_dev *pdev) {
+	struct Scsi_Host *shost = pci_get_drvdata(pdev);
+	struct aac_dev *aac = (struct aac_dev *)shost->hostdata;
+	int r;
+
+	pci_set_power_state(pdev, PCI_D0);
+	pci_enable_wake(pdev, PCI_D0, 0);
+	pci_restore_state(pdev);
+	r = pci_enable_device(pdev);
+
+	if (r)
+		goto fail_device;
+
+	pci_set_master(pdev);
+	if (aac_acquire_resources(aac))
+		goto fail_device;
+	scsi_unblock_requests(shost);
+
+	return 0;
+
+fail_device:
+	printk(KERN_INFO "%s%d: resume failed.\n", aac->name, aac->id);
+	scsi_host_put(shost);
+	pci_disable_device(pdev);
+	return -ENODEV;
+}
+#endif
+
 static void aac_shutdown(struct pci_dev *dev)  {
 	struct Scsi_Host *shost = pci_get_drvdata(dev); @@ -1356,6 +1499,10 @@ static struct pci_driver aac_pci_driver = {
 	.id_table	= aac_pci_tbl,
 	.probe		= aac_probe_one,
 	.remove		= aac_remove_one,
+#if (defined(CONFIG_PM))
+	.suspend	= aac_suspend,
+	.resume		= aac_resume,
+#endif
 	.shutdown	= aac_shutdown,
 };
 
diff --git a/drivers/scsi/aacraid/rx.c b/drivers/scsi/aacraid/rx.c index 9570612..ac16380 100644
--- a/drivers/scsi/aacraid/rx.c
+++ b/drivers/scsi/aacraid/rx.c
@@ -623,6 +623,7 @@ int _aac_rx_init(struct aac_dev *dev)
 	dev->a_ops.adapter_sync_cmd = rx_sync_cmd;
 	dev->a_ops.adapter_check_health = aac_rx_check_health;
 	dev->a_ops.adapter_restart = aac_rx_restart_adapter;
+	dev->a_ops.adapter_start = aac_rx_start_adapter;
 
 	/*
 	 *	First clear out all interrupts.  Then enable the one's that we
diff --git a/drivers/scsi/aacraid/sa.c b/drivers/scsi/aacraid/sa.c index e66477c..869aea2 100644
--- a/drivers/scsi/aacraid/sa.c
+++ b/drivers/scsi/aacraid/sa.c
@@ -372,6 +372,7 @@ int aac_sa_init(struct aac_dev *dev)
 	dev->a_ops.adapter_sync_cmd = sa_sync_cmd;
 	dev->a_ops.adapter_check_health = aac_sa_check_health;
 	dev->a_ops.adapter_restart = aac_sa_restart_adapter;
+	dev->a_ops.adapter_start = aac_sa_start_adapter;
 	dev->a_ops.adapter_intr = aac_sa_intr;
 	dev->a_ops.adapter_deliver = aac_rx_deliver_producer;
 	dev->a_ops.adapter_ioremap = aac_sa_ioremap; diff --git a/drivers/scsi/aacraid/src.c b/drivers/scsi/aacraid/src.c index e63cf9f..b147341 100644
--- a/drivers/scsi/aacraid/src.c
+++ b/drivers/scsi/aacraid/src.c
@@ -726,6 +726,7 @@ int aac_src_init(struct aac_dev *dev)
 	dev->a_ops.adapter_sync_cmd = src_sync_cmd;
 	dev->a_ops.adapter_check_health = aac_src_check_health;
 	dev->a_ops.adapter_restart = aac_src_restart_adapter;
+	dev->a_ops.adapter_start = aac_src_start_adapter;
 
 	/*
 	 *	First clear out all interrupts.  Then enable the one's that we
@@ -892,6 +893,7 @@ int aac_srcv_init(struct aac_dev *dev)
 	dev->a_ops.adapter_sync_cmd = src_sync_cmd;
 	dev->a_ops.adapter_check_health = aac_src_check_health;
 	dev->a_ops.adapter_restart = aac_src_restart_adapter;
+	dev->a_ops.adapter_start = aac_src_start_adapter;
 
 	/*
 	 *	First clear out all interrupts.  Then enable the one's that we
--
1.9.3

RE: [PATCH V6 03/10] [SCSI] aacraid: Change interrupt mode to MSI for series-6 controller

[Murthy Bhat]

Reviewed-by: Murthy Bhat <Murthy.Bhat@pmcs.com>


-----Original Message-----
From: Karthikeya Sunkesula 
Sent: Tuesday, August 25, 2015 11:57 AM
To: Mahesh Rajashekhara; Tomas Henzl; JBottomley@Parallels.com; linux-scsi@vger.kernel.org
Cc: aacraid@pmc-sierra.com; Harry Yang; Rich Bono; Murthy Bhat
Subject: RE: [PATCH V6 03/10] [SCSI] aacraid: Change interrupt mode to MSI for series-6 controller

Reviewed-by: Karthikeya Sunkesula <Karthikeya.Sunkesula@pmcs.com>


-----Original Message-----
From: Mahesh Rajashekhara 
Sent: Tuesday, August 11, 2015 11:28 AM
To: Tomas Henzl; JBottomley@Parallels.com; linux-scsi@vger.kernel.org
Cc: aacraid@pmc-sierra.com; Harry Yang; Rich Bono; Mahesh Rajashekhara
Subject: [PATCH V6 03/10] [SCSI] aacraid: Change interrupt mode to MSI for series-6 controller

Description:
	This change always sets MSI interrupt mode for series-6 controller.

Changes from V2:
aac_msi option description and subject change.

Signed-off-by: Mahesh Rajashekhara <Mahesh.Rajashekhara@pmcs.com>
---
 drivers/scsi/aacraid/aachba.c | 2 +-
 drivers/scsi/aacraid/src.c    | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/scsi/aacraid/aachba.c b/drivers/scsi/aacraid/aachba.c index fe59b00..05f2a02 100644
--- a/drivers/scsi/aacraid/aachba.c
+++ b/drivers/scsi/aacraid/aachba.c
@@ -259,7 +259,7 @@ MODULE_PARM_DESC(commit, "Control whether a COMMIT_CONFIG is issued to the"
 	" 0=off, 1=on");
 module_param_named(msi, aac_msi, int, S_IRUGO|S_IWUSR);  MODULE_PARM_DESC(msi, "IRQ handling."
-	" 0=PIC(default), 1=MSI, 2=MSI-X(unsupported, uses MSI)");
+	" 0=PIC(default), 1=MSI, 2=MSI-X)");
 module_param(startup_timeout, int, S_IRUGO|S_IWUSR);  MODULE_PARM_DESC(startup_timeout, "The duration of time in seconds to wait for"
 	" adapter to have it's kernel up and\n"
diff --git a/drivers/scsi/aacraid/src.c b/drivers/scsi/aacraid/src.c index b147341..eb07b3d 100644
--- a/drivers/scsi/aacraid/src.c
+++ b/drivers/scsi/aacraid/src.c
@@ -742,7 +742,7 @@ int aac_src_init(struct aac_dev *dev)
 	if (dev->comm_interface != AAC_COMM_MESSAGE_TYPE1)
 		goto error_iounmap;
 
-	dev->msi = aac_msi && !pci_enable_msi(dev->pdev);
+	dev->msi = !pci_enable_msi(dev->pdev);
 
 	dev->aac_msix[0].vector_no = 0;
 	dev->aac_msix[0].dev = dev;
--
1.9.3

RE: [PATCH V6 04/10] [SCSI] aacraid: Enable 64-bit write to controller register

[Murthy Bhat]

Reviewed-by: Murthy Bhat <Murthy.Bhat@pmcs.com>


-----Original Message-----
From: Karthikeya Sunkesula 
Sent: Tuesday, August 25, 2015 11:58 AM
To: Mahesh Rajashekhara; Tomas Henzl; JBottomley@Parallels.com; linux-scsi@vger.kernel.org
Cc: aacraid@pmc-sierra.com; Harry Yang; Rich Bono; Murthy Bhat
Subject: RE: [PATCH V6 04/10] [SCSI] aacraid: Enable 64-bit write to controller register

Reviewed-by: Karthikeya Sunkesula <Karthikeya.Sunkesula@pmcs.com>


-----Original Message-----
From: Mahesh Rajashekhara 
Sent: Tuesday, August 11, 2015 11:28 AM
To: Tomas Henzl; JBottomley@Parallels.com; linux-scsi@vger.kernel.org
Cc: aacraid@pmc-sierra.com; Harry Yang; Rich Bono; Mahesh Rajashekhara
Subject: [PATCH V6 04/10] [SCSI] aacraid: Enable 64-bit write to controller register

Description:
	If writeq() not supported, then do atomic two 32bit write

Changes from V2:
None

Signed-off-by: Mahesh Rajashekhara <Mahesh.Rajashekhara@pmcs.com>
---
 drivers/scsi/aacraid/aacraid.h  |  9 +++++++++  drivers/scsi/aacraid/comminit.c |  1 +
 drivers/scsi/aacraid/src.c      | 12 ++++++++++--
 3 files changed, 20 insertions(+), 2 deletions(-)

diff --git a/drivers/scsi/aacraid/aacraid.h b/drivers/scsi/aacraid/aacraid.h index 62b0999..e54f597 100644
--- a/drivers/scsi/aacraid/aacraid.h
+++ b/drivers/scsi/aacraid/aacraid.h
@@ -844,6 +844,10 @@ struct src_registers {
 						&((AEP)->regs.src.bar0->CSR))
 #define src_writel(AEP, CSR, value)	writel(value, \
 						&((AEP)->regs.src.bar0->CSR))
+#if defined(writeq)
+#define	src_writeq(AEP, CSR, value)	writeq(value, \
+						&((AEP)->regs.src.bar0->CSR))
+#endif
 
 #define SRC_ODR_SHIFT		12
 #define SRC_IDR_SHIFT		9
@@ -1163,6 +1167,11 @@ struct aac_dev
 	struct fsa_dev_info	*fsa_dev;
 	struct task_struct	*thread;
 	int			cardtype;
+	/*
+	 *This lock will protect the two 32-bit
+	 *writes to the Inbound Queue
+	 */
+	spinlock_t		iq_lock;
 
 	/*
 	 *	The following is the device specific extension.
diff --git a/drivers/scsi/aacraid/comminit.c b/drivers/scsi/aacraid/comminit.c index 45a0a04..b4b6088 100644
--- a/drivers/scsi/aacraid/comminit.c
+++ b/drivers/scsi/aacraid/comminit.c
@@ -424,6 +424,7 @@ struct aac_dev *aac_init_adapter(struct aac_dev *dev)
 	dev->management_fib_count = 0;
 	spin_lock_init(&dev->manage_lock);
 	spin_lock_init(&dev->sync_lock);
+	spin_lock_init(&dev->iq_lock);
 	dev->max_fib_size = sizeof(struct hw_fib);
 	dev->sg_tablesize = host->sg_tablesize = (dev->max_fib_size
 		- sizeof(struct aac_fibhdr)
diff --git a/drivers/scsi/aacraid/src.c b/drivers/scsi/aacraid/src.c index eb07b3d..1409a0b 100644
--- a/drivers/scsi/aacraid/src.c
+++ b/drivers/scsi/aacraid/src.c
@@ -447,6 +447,10 @@ static int aac_src_deliver_message(struct fib *fib)
 	u32 fibsize;
 	dma_addr_t address;
 	struct aac_fib_xporthdr *pFibX;
+#if !defined(writeq)
+	unsigned long flags;
+#endif
+
 	u16 hdr_size = le16_to_cpu(fib->hw_fib_va->header.Size);
 
 	atomic_inc(&q->numpending);
@@ -511,10 +515,14 @@ static int aac_src_deliver_message(struct fib *fib)
 			return -EINVAL;
 		address |= fibsize;
 	}
-
+#if defined(writeq)
+	src_writeq(dev, MUnit.IQ_L, (u64)address); #else
+	spin_lock_irqsave(&fib->dev->iq_lock, flags);
 	src_writel(dev, MUnit.IQ_H, upper_32_bits(address) & 0xffffffff);
 	src_writel(dev, MUnit.IQ_L, address & 0xffffffff);
-
+	spin_unlock_irqrestore(&fib->dev->iq_lock, flags); #endif
 	return 0;
 }
 
--
1.9.3

RE: [PATCH V6 05/10] [SCSI] aacraid: Tune response path if IsFastPath bit set

[Murthy Bhat]

Reviewed-by: Murthy Bhat <Murthy.Bhat@pmcs.com>


-----Original Message-----
From: Karthikeya Sunkesula 
Sent: Tuesday, August 25, 2015 11:58 AM
To: Mahesh Rajashekhara; Tomas Henzl; JBottomley@Parallels.com; linux-scsi@vger.kernel.org
Cc: aacraid@pmc-sierra.com; Harry Yang; Rich Bono; Murthy Bhat
Subject: RE: [PATCH V6 05/10] [SCSI] aacraid: Tune response path if IsFastPath bit set

Reviewed-by: Karthikeya Sunkesula <Karthikeya.Sunkesula@pmcs.com>


-----Original Message-----
From: Mahesh Rajashekhara 
Sent: Tuesday, August 11, 2015 11:28 AM
To: Tomas Henzl; JBottomley@Parallels.com; linux-scsi@vger.kernel.org
Cc: aacraid@pmc-sierra.com; Harry Yang; Rich Bono; Mahesh Rajashekhara
Subject: [PATCH V6 05/10] [SCSI] aacraid: Tune response path if IsFastPath bit set

Description:
	If 'IsFastPath' bit is set, then response path assumes no error
	and skips error check.

Changes from V2:
None

Signed-off-by: Mahesh Rajashekhara <Mahesh.Rajashekhara@pmcs.com>
---
 drivers/scsi/aacraid/aachba.c | 259 ++++++++++++++++++++++--------------------
 1 file changed, 137 insertions(+), 122 deletions(-)

diff --git a/drivers/scsi/aacraid/aachba.c b/drivers/scsi/aacraid/aachba.c index 05f2a02..e4c2437 100644
--- a/drivers/scsi/aacraid/aachba.c
+++ b/drivers/scsi/aacraid/aachba.c
@@ -2977,11 +2977,16 @@ static void aac_srb_callback(void *context, struct fib * fibptr)
 		return;
 
 	BUG_ON(fibptr == NULL);
-
 	dev = fibptr->dev;
 
-	srbreply = (struct aac_srb_reply *) fib_data(fibptr);
+	scsi_dma_unmap(scsicmd);
 
+	/* expose physical device if expose_physicald flag is on */
+	if (scsicmd->cmnd[0] == INQUIRY && !(scsicmd->cmnd[1] & 0x01)
+	  && expose_physicals > 0)
+		aac_expose_phy_device(scsicmd);
+
+	srbreply = (struct aac_srb_reply *) fib_data(fibptr);
 	scsicmd->sense_buffer[0] = '\0';  /* Initialize sense valid flag to false */
 
 	if (fibptr->flags & FIB_CONTEXT_FLAG_FASTRESP) { @@ -2994,147 +2999,157 @@ static void aac_srb_callback(void *context, struct fib * fibptr)
 		 */
 		scsi_set_resid(scsicmd, scsi_bufflen(scsicmd)
 				   - le32_to_cpu(srbreply->data_xfer_length));
-	}
-
-	scsi_dma_unmap(scsicmd);
-
-	/* expose physical device if expose_physicald flag is on */
-	if (scsicmd->cmnd[0] == INQUIRY && !(scsicmd->cmnd[1] & 0x01)
-	  && expose_physicals > 0)
-		aac_expose_phy_device(scsicmd);
+		/*
+		 * First check the fib status
+		 */
 
-	/*
-	 * First check the fib status
-	 */
+		if (le32_to_cpu(srbreply->status) != ST_OK) {
+			int len;
 
-	if (le32_to_cpu(srbreply->status) != ST_OK){
-		int len;
-		printk(KERN_WARNING "aac_srb_callback: srb failed, status = %d\n", le32_to_cpu(srbreply->status));
-		len = min_t(u32, le32_to_cpu(srbreply->sense_data_size),
-			    SCSI_SENSE_BUFFERSIZE);
-		scsicmd->result = DID_ERROR << 16 | COMMAND_COMPLETE << 8 | SAM_STAT_CHECK_CONDITION;
-		memcpy(scsicmd->sense_buffer, srbreply->sense_data, len);
-	}
+			printk(KERN_WARNING "aac_srb_callback: srb failed, status = %d\n", le32_to_cpu(srbreply->status));
+			len = min_t(u32, le32_to_cpu(srbreply->sense_data_size),
+				    SCSI_SENSE_BUFFERSIZE);
+			scsicmd->result = DID_ERROR << 16
+						| COMMAND_COMPLETE << 8
+						| SAM_STAT_CHECK_CONDITION;
+			memcpy(scsicmd->sense_buffer,
+					srbreply->sense_data, len);
+		}
 
-	/*
-	 * Next check the srb status
-	 */
-	switch( (le32_to_cpu(srbreply->srb_status))&0x3f){
-	case SRB_STATUS_ERROR_RECOVERY:
-	case SRB_STATUS_PENDING:
-	case SRB_STATUS_SUCCESS:
-		scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8;
-		break;
-	case SRB_STATUS_DATA_OVERRUN:
-		switch(scsicmd->cmnd[0]){
-		case  READ_6:
-		case  WRITE_6:
-		case  READ_10:
-		case  WRITE_10:
-		case  READ_12:
-		case  WRITE_12:
-		case  READ_16:
-		case  WRITE_16:
-			if (le32_to_cpu(srbreply->data_xfer_length) < scsicmd->underflow) {
-				printk(KERN_WARNING"aacraid: SCSI CMD underflow\n");
-			} else {
-				printk(KERN_WARNING"aacraid: SCSI CMD Data Overrun\n");
+		/*
+		 * Next check the srb status
+		 */
+		switch ((le32_to_cpu(srbreply->srb_status))&0x3f) {
+		case SRB_STATUS_ERROR_RECOVERY:
+		case SRB_STATUS_PENDING:
+		case SRB_STATUS_SUCCESS:
+			scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8;
+			break;
+		case SRB_STATUS_DATA_OVERRUN:
+			switch (scsicmd->cmnd[0]) {
+			case  READ_6:
+			case  WRITE_6:
+			case  READ_10:
+			case  WRITE_10:
+			case  READ_12:
+			case  WRITE_12:
+			case  READ_16:
+			case  WRITE_16:
+				if (le32_to_cpu(srbreply->data_xfer_length)
+							< scsicmd->underflow)
+					printk(KERN_WARNING"aacraid: SCSI CMD underflow\n");
+				else
+					printk(KERN_WARNING"aacraid: SCSI CMD Data Overrun\n");
+				scsicmd->result = DID_ERROR << 16
+							| COMMAND_COMPLETE << 8;
+				break;
+			case INQUIRY: {
+				scsicmd->result = DID_OK << 16
+							| COMMAND_COMPLETE << 8;
+				break;
+			}
+			default:
+				scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8;
+				break;
 			}
-			scsicmd->result = DID_ERROR << 16 | COMMAND_COMPLETE << 8;
 			break;
-		case INQUIRY: {
-			scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8;
+		case SRB_STATUS_ABORTED:
+			scsicmd->result = DID_ABORT << 16 | ABORT << 8;
 			break;
-		}
-		default:
-			scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8;
+		case SRB_STATUS_ABORT_FAILED:
+			/*
+			 * Not sure about this one - but assuming the
+			 * hba was trying to abort for some reason
+			 */
+			scsicmd->result = DID_ERROR << 16 | ABORT << 8;
+			break;
+		case SRB_STATUS_PARITY_ERROR:
+			scsicmd->result = DID_PARITY << 16
+						| MSG_PARITY_ERROR << 8;
+			break;
+		case SRB_STATUS_NO_DEVICE:
+		case SRB_STATUS_INVALID_PATH_ID:
+		case SRB_STATUS_INVALID_TARGET_ID:
+		case SRB_STATUS_INVALID_LUN:
+		case SRB_STATUS_SELECTION_TIMEOUT:
+			scsicmd->result = DID_NO_CONNECT << 16
+						| COMMAND_COMPLETE << 8;
 			break;
-		}
-		break;
-	case SRB_STATUS_ABORTED:
-		scsicmd->result = DID_ABORT << 16 | ABORT << 8;
-		break;
-	case SRB_STATUS_ABORT_FAILED:
-		// Not sure about this one - but assuming the hba was trying to abort for some reason
-		scsicmd->result = DID_ERROR << 16 | ABORT << 8;
-		break;
-	case SRB_STATUS_PARITY_ERROR:
-		scsicmd->result = DID_PARITY << 16 | MSG_PARITY_ERROR << 8;
-		break;
-	case SRB_STATUS_NO_DEVICE:
-	case SRB_STATUS_INVALID_PATH_ID:
-	case SRB_STATUS_INVALID_TARGET_ID:
-	case SRB_STATUS_INVALID_LUN:
-	case SRB_STATUS_SELECTION_TIMEOUT:
-		scsicmd->result = DID_NO_CONNECT << 16 | COMMAND_COMPLETE << 8;
-		break;
 
-	case SRB_STATUS_COMMAND_TIMEOUT:
-	case SRB_STATUS_TIMEOUT:
-		scsicmd->result = DID_TIME_OUT << 16 | COMMAND_COMPLETE << 8;
-		break;
+		case SRB_STATUS_COMMAND_TIMEOUT:
+		case SRB_STATUS_TIMEOUT:
+			scsicmd->result = DID_TIME_OUT << 16
+						| COMMAND_COMPLETE << 8;
+			break;
 
-	case SRB_STATUS_BUSY:
-		scsicmd->result = DID_BUS_BUSY << 16 | COMMAND_COMPLETE << 8;
-		break;
+		case SRB_STATUS_BUSY:
+			scsicmd->result = DID_BUS_BUSY << 16
+						| COMMAND_COMPLETE << 8;
+			break;
 
-	case SRB_STATUS_BUS_RESET:
-		scsicmd->result = DID_RESET << 16 | COMMAND_COMPLETE << 8;
-		break;
+		case SRB_STATUS_BUS_RESET:
+			scsicmd->result = DID_RESET << 16
+						| COMMAND_COMPLETE << 8;
+			break;
 
-	case SRB_STATUS_MESSAGE_REJECTED:
-		scsicmd->result = DID_ERROR << 16 | MESSAGE_REJECT << 8;
-		break;
-	case SRB_STATUS_REQUEST_FLUSHED:
-	case SRB_STATUS_ERROR:
-	case SRB_STATUS_INVALID_REQUEST:
-	case SRB_STATUS_REQUEST_SENSE_FAILED:
-	case SRB_STATUS_NO_HBA:
-	case SRB_STATUS_UNEXPECTED_BUS_FREE:
-	case SRB_STATUS_PHASE_SEQUENCE_FAILURE:
-	case SRB_STATUS_BAD_SRB_BLOCK_LENGTH:
-	case SRB_STATUS_DELAYED_RETRY:
-	case SRB_STATUS_BAD_FUNCTION:
-	case SRB_STATUS_NOT_STARTED:
-	case SRB_STATUS_NOT_IN_USE:
-	case SRB_STATUS_FORCE_ABORT:
-	case SRB_STATUS_DOMAIN_VALIDATION_FAIL:
-	default:
+		case SRB_STATUS_MESSAGE_REJECTED:
+			scsicmd->result = DID_ERROR << 16
+						| MESSAGE_REJECT << 8;
+			break;
+		case SRB_STATUS_REQUEST_FLUSHED:
+		case SRB_STATUS_ERROR:
+		case SRB_STATUS_INVALID_REQUEST:
+		case SRB_STATUS_REQUEST_SENSE_FAILED:
+		case SRB_STATUS_NO_HBA:
+		case SRB_STATUS_UNEXPECTED_BUS_FREE:
+		case SRB_STATUS_PHASE_SEQUENCE_FAILURE:
+		case SRB_STATUS_BAD_SRB_BLOCK_LENGTH:
+		case SRB_STATUS_DELAYED_RETRY:
+		case SRB_STATUS_BAD_FUNCTION:
+		case SRB_STATUS_NOT_STARTED:
+		case SRB_STATUS_NOT_IN_USE:
+		case SRB_STATUS_FORCE_ABORT:
+		case SRB_STATUS_DOMAIN_VALIDATION_FAIL:
+		default:
 #ifdef AAC_DETAILED_STATUS_INFO
-		printk("aacraid: SRB ERROR(%u) %s scsi cmd 0x%x - scsi status 0x%x\n",
-			le32_to_cpu(srbreply->srb_status) & 0x3F,
-			aac_get_status_string(
-				le32_to_cpu(srbreply->srb_status) & 0x3F),
-			scsicmd->cmnd[0],
-			le32_to_cpu(srbreply->scsi_status));
+			printk(KERN_INFO "aacraid: SRB ERROR(%u) %s scsi cmd 0x%x - scsi status 0x%x\n",
+				le32_to_cpu(srbreply->srb_status) & 0x3F,
+				aac_get_status_string(
+					le32_to_cpu(srbreply->srb_status) & 0x3F),
+				scsicmd->cmnd[0],
+				le32_to_cpu(srbreply->scsi_status));
 #endif
-		if ((scsicmd->cmnd[0] == ATA_12)
-		  || (scsicmd->cmnd[0] == ATA_16)) {
-			if (scsicmd->cmnd[2] & (0x01 << 5)) {
-				scsicmd->result = DID_OK << 16
-						| COMMAND_COMPLETE << 8;
+			if ((scsicmd->cmnd[0] == ATA_12)
+				|| (scsicmd->cmnd[0] == ATA_16)) {
+					if (scsicmd->cmnd[2] & (0x01 << 5)) {
+						scsicmd->result = DID_OK << 16
+							| COMMAND_COMPLETE << 8;
 				break;
+				} else {
+					scsicmd->result = DID_ERROR << 16
+						| COMMAND_COMPLETE << 8;
+					break;
+				}
 			} else {
 				scsicmd->result = DID_ERROR << 16
-						| COMMAND_COMPLETE << 8;
+					| COMMAND_COMPLETE << 8;
 				break;
 			}
-		} else {
-			scsicmd->result = DID_ERROR << 16
-					| COMMAND_COMPLETE << 8;
-			break;
 		}
-	}
-	if (le32_to_cpu(srbreply->scsi_status) == SAM_STAT_CHECK_CONDITION) {
-		int len;
-		scsicmd->result |= SAM_STAT_CHECK_CONDITION;
-		len = min_t(u32, le32_to_cpu(srbreply->sense_data_size),
-			    SCSI_SENSE_BUFFERSIZE);
+		if (le32_to_cpu(srbreply->scsi_status)
+				== SAM_STAT_CHECK_CONDITION) {
+			int len;
+
+			scsicmd->result |= SAM_STAT_CHECK_CONDITION;
+			len = min_t(u32, le32_to_cpu(srbreply->sense_data_size),
+				    SCSI_SENSE_BUFFERSIZE);
 #ifdef AAC_DETAILED_STATUS_INFO
-		printk(KERN_WARNING "aac_srb_callback: check condition, status = %d len=%d\n",
-					le32_to_cpu(srbreply->status), len);
+			printk(KERN_WARNING "aac_srb_callback: check condition, status = %d len=%d\n",
+						le32_to_cpu(srbreply->status), len);
 #endif
-		memcpy(scsicmd->sense_buffer, srbreply->sense_data, len);
+			memcpy(scsicmd->sense_buffer,
+					srbreply->sense_data, len);
+		}
 	}
 	/*
 	 * OR in the scsi status (already shifted up a bit)
--
1.9.3

RE: [PATCH V6 06/10] [SCSI] aacraid: Reset irq affinity hints before releasing irq

[Murthy Bhat]

Reviewed-by: Murthy Bhat <Murthy.Bhat@pmcs.com>


-----Original Message-----
From: Karthikeya Sunkesula 
Sent: Tuesday, August 25, 2015 11:59 AM
To: Mahesh Rajashekhara; Tomas Henzl; JBottomley@Parallels.com; linux-scsi@vger.kernel.org
Cc: aacraid@pmc-sierra.com; Harry Yang; Rich Bono; Murthy Bhat
Subject: RE: [PATCH V6 06/10] [SCSI] aacraid: Reset irq affinity hints before releasing irq

Reviewed-by: Karthikeya Sunkesula <Karthikeya.Sunkesula@pmcs.com>


-----Original Message-----
From: Mahesh Rajashekhara 
Sent: Tuesday, August 11, 2015 11:28 AM
To: Tomas Henzl; JBottomley@Parallels.com; linux-scsi@vger.kernel.org
Cc: aacraid@pmc-sierra.com; Harry Yang; Rich Bono; Mahesh Rajashekhara
Subject: [PATCH V6 06/10] [SCSI] aacraid: Reset irq affinity hints before releasing irq

Description:
	Reset irq affinity hints before releasing IRQ
	Removed duplicate code of IRQ acquire/release

Changes from V2:
None

Signed-off-by: Mahesh Rajashekhara <Mahesh.Rajashekhara@pmcs.com>
---
 drivers/scsi/aacraid/aacraid.h |   2 +
 drivers/scsi/aacraid/commsup.c | 113 ++++++++++++++++++++++++++++++-----------
 drivers/scsi/aacraid/src.c     |  48 ++---------------
 3 files changed, 88 insertions(+), 75 deletions(-)

diff --git a/drivers/scsi/aacraid/aacraid.h b/drivers/scsi/aacraid/aacraid.h index e54f597..7b95227 100644
--- a/drivers/scsi/aacraid/aacraid.h
+++ b/drivers/scsi/aacraid/aacraid.h
@@ -2110,6 +2110,8 @@ static inline unsigned int cap_to_cyls(sector_t capacity, unsigned divisor)
 #define AAC_OWNER_ERROR_HANDLER	0x103
 #define AAC_OWNER_FIRMWARE	0x106
 
+int aac_acquire_irq(struct aac_dev *dev); void aac_free_irq(struct 
+aac_dev *dev);
 const char *aac_driverinfo(struct Scsi_Host *);  struct fib *aac_fib_alloc(struct aac_dev *dev);  int aac_fib_setup(struct aac_dev *dev); diff --git a/drivers/scsi/aacraid/commsup.c b/drivers/scsi/aacraid/commsup.c index 4da5749..a1f90fe 100644
--- a/drivers/scsi/aacraid/commsup.c
+++ b/drivers/scsi/aacraid/commsup.c
@@ -1270,13 +1270,12 @@ retry_next:
 static int _aac_reset_adapter(struct aac_dev *aac, int forced)  {
 	int index, quirks;
-	int retval, i;
+	int retval;
 	struct Scsi_Host *host;
 	struct scsi_device *dev;
 	struct scsi_cmnd *command;
 	struct scsi_cmnd *command_list;
 	int jafo = 0;
-	int cpu;
 
 	/*
 	 * Assumptions:
@@ -1339,35 +1338,7 @@ static int _aac_reset_adapter(struct aac_dev *aac, int forced)
 	aac->comm_phys = 0;
 	kfree(aac->queues);
 	aac->queues = NULL;
-	cpu = cpumask_first(cpu_online_mask);
-	if (aac->pdev->device == PMC_DEVICE_S6 ||
-	    aac->pdev->device == PMC_DEVICE_S7 ||
-	    aac->pdev->device == PMC_DEVICE_S8 ||
-	    aac->pdev->device == PMC_DEVICE_S9) {
-		if (aac->max_msix > 1) {
-			for (i = 0; i < aac->max_msix; i++) {
-				if (irq_set_affinity_hint(
-				    aac->msixentry[i].vector,
-				    NULL)) {
-					printk(KERN_ERR "%s%d: Failed to reset IRQ affinity for cpu %d\n",
-						aac->name,
-						aac->id,
-						cpu);
-				}
-				cpu = cpumask_next(cpu,
-						cpu_online_mask);
-				free_irq(aac->msixentry[i].vector,
-					 &(aac->aac_msix[i]));
-			}
-			pci_disable_msix(aac->pdev);
-		} else {
-			free_irq(aac->pdev->irq, &(aac->aac_msix[0]));
-		}
-	} else {
-		free_irq(aac->pdev->irq, aac);
-	}
-	if (aac->msi)
-		pci_disable_msi(aac->pdev);
+	aac_free_irq(aac);
 	kfree(aac->fsa_dev);
 	aac->fsa_dev = NULL;
 	quirks = aac_get_driver_ident(index)->quirks;
@@ -1978,3 +1949,83 @@ int aac_command_thread(void *data)
 	dev->aif_thread = 0;
 	return 0;
 }
+
+int aac_acquire_irq(struct aac_dev *dev) {
+	int i;
+	int j;
+	int ret = 0;
+	int cpu;
+
+	cpu = cpumask_first(cpu_online_mask);
+	if (!dev->sync_mode && dev->msi_enabled && dev->max_msix > 1) {
+		for (i = 0; i < dev->max_msix; i++) {
+			dev->aac_msix[i].vector_no = i;
+			dev->aac_msix[i].dev = dev;
+			if (request_irq(dev->msixentry[i].vector,
+					dev->a_ops.adapter_intr,
+					0, "aacraid", &(dev->aac_msix[i]))) {
+				printk(KERN_ERR "%s%d: Failed to register IRQ for vector %d.\n",
+						dev->name, dev->id, i);
+				for (j = 0 ; j < i ; j++)
+					free_irq(dev->msixentry[j].vector,
+						 &(dev->aac_msix[j]));
+				pci_disable_msix(dev->pdev);
+				ret = -1;
+			}
+			if (irq_set_affinity_hint(dev->msixentry[i].vector,
+							get_cpu_mask(cpu))) {
+				printk(KERN_ERR "%s%d: Failed to set IRQ affinity for cpu %d\n",
+					    dev->name, dev->id, cpu);
+			}
+			cpu = cpumask_next(cpu, cpu_online_mask);
+		}
+	} else {
+		dev->aac_msix[0].vector_no = 0;
+		dev->aac_msix[0].dev = dev;
+
+		if (request_irq(dev->pdev->irq, dev->a_ops.adapter_intr,
+			IRQF_SHARED, "aacraid",
+			&(dev->aac_msix[0])) < 0) {
+			if (dev->msi)
+				pci_disable_msi(dev->pdev);
+			printk(KERN_ERR "%s%d: Interrupt unavailable.\n",
+					dev->name, dev->id);
+			ret = -1;
+		}
+	}
+	return ret;
+}
+
+void aac_free_irq(struct aac_dev *dev)
+{
+	int i;
+	int cpu;
+
+	cpu = cpumask_first(cpu_online_mask);
+	if (dev->pdev->device == PMC_DEVICE_S6 ||
+	    dev->pdev->device == PMC_DEVICE_S7 ||
+	    dev->pdev->device == PMC_DEVICE_S8 ||
+	    dev->pdev->device == PMC_DEVICE_S9) {
+		if (dev->max_msix > 1) {
+			for (i = 0; i < dev->max_msix; i++) {
+				if (irq_set_affinity_hint(
+					dev->msixentry[i].vector, NULL)) {
+					printk(KERN_ERR "%s%d: Failed to reset IRQ affinity for cpu %d\n",
+					    dev->name, dev->id, cpu);
+				}
+				cpu = cpumask_next(cpu, cpu_online_mask);
+				free_irq(dev->msixentry[i].vector,
+						&(dev->aac_msix[i]));
+			}
+		} else {
+			free_irq(dev->pdev->irq, &(dev->aac_msix[0]));
+		}
+	} else {
+		free_irq(dev->pdev->irq, dev);
+	}
+	if (dev->msi)
+		pci_disable_msi(dev->pdev);
+	else if (dev->max_msix > 1)
+		pci_disable_msix(dev->pdev);
+}
diff --git a/drivers/scsi/aacraid/src.c b/drivers/scsi/aacraid/src.c index 1409a0b..2aa34ea 100644
--- a/drivers/scsi/aacraid/src.c
+++ b/drivers/scsi/aacraid/src.c
@@ -798,9 +798,7 @@ int aac_srcv_init(struct aac_dev *dev)
 	unsigned long status;
 	int restart = 0;
 	int instance = dev->id;
-	int i, j;
 	const char *name = dev->name;
-	int cpu;
 
 	dev->a_ops.adapter_ioremap = aac_srcv_ioremap;
 	dev->a_ops.adapter_comm = aac_src_select_comm; @@ -918,48 +916,10 @@ int aac_srcv_init(struct aac_dev *dev)
 		goto error_iounmap;
 	if (dev->msi_enabled)
 		aac_src_access_devreg(dev, AAC_ENABLE_MSIX);
-	if (!dev->sync_mode && dev->msi_enabled && dev->max_msix > 1) {
-		cpu = cpumask_first(cpu_online_mask);
-		for (i = 0; i < dev->max_msix; i++) {
-			dev->aac_msix[i].vector_no = i;
-			dev->aac_msix[i].dev = dev;
-
-			if (request_irq(dev->msixentry[i].vector,
-					dev->a_ops.adapter_intr,
-					0,
-					"aacraid",
-					&(dev->aac_msix[i]))) {
-				printk(KERN_ERR "%s%d: Failed to register IRQ for vector %d.\n",
-						name, instance, i);
-				for (j = 0 ; j < i ; j++)
-					free_irq(dev->msixentry[j].vector,
-						 &(dev->aac_msix[j]));
-				pci_disable_msix(dev->pdev);
-				goto error_iounmap;
-			}
-			if (irq_set_affinity_hint(
-			   dev->msixentry[i].vector,
-			   get_cpu_mask(cpu))) {
-				printk(KERN_ERR "%s%d: Failed to set IRQ affinity for cpu %d\n",
-						name, instance, cpu);
-			}
-			cpu = cpumask_next(cpu, cpu_online_mask);
-		}
-	} else {
-		dev->aac_msix[0].vector_no = 0;
-		dev->aac_msix[0].dev = dev;
-
-		if (request_irq(dev->pdev->irq, dev->a_ops.adapter_intr,
-				IRQF_SHARED,
-				"aacraid",
-				&(dev->aac_msix[0])) < 0) {
-			if (dev->msi)
-				pci_disable_msi(dev->pdev);
-			printk(KERN_ERR "%s%d: Interrupt unavailable.\n",
-					name, instance);
-			goto error_iounmap;
-		}
-	}
+
+	if (aac_acquire_irq(dev))
+		goto error_iounmap;
+
 	dev->dbg_base = dev->base_start;
 	dev->dbg_base_mapped = dev->base;
 	dev->dbg_size = dev->base_size;
--
1.9.3

RE: [PATCH V6 07/10] [SCSI] aacraid: Unblock IOCTLs to controller once system resumed from suspend

[Murthy Bhat]

Reviewed-by: Murthy Bhat <Murthy.Bhat@pmcs.com>


-----Original Message-----
From: Karthikeya Sunkesula 
Sent: Tuesday, August 25, 2015 11:59 AM
To: Mahesh Rajashekhara; Tomas Henzl; JBottomley@Parallels.com; linux-scsi@vger.kernel.org
Cc: aacraid@pmc-sierra.com; Harry Yang; Rich Bono; Murthy Bhat
Subject: RE: [PATCH V6 07/10] [SCSI] aacraid: Unblock IOCTLs to controller once system resumed from suspend

Reviewed-by: Karthikeya Sunkesula <Karthikeya.Sunkesula@pmcs.com>


-----Original Message-----
From: Mahesh Rajashekhara 
Sent: Tuesday, August 11, 2015 11:28 AM
To: Tomas Henzl; JBottomley@Parallels.com; linux-scsi@vger.kernel.org
Cc: aacraid@pmc-sierra.com; Harry Yang; Rich Bono; Mahesh Rajashekhara
Subject: [PATCH V6 07/10] [SCSI] aacraid: Unblock IOCTLs to controller once system resumed from suspend

Description:
	Driver blocks ioctls once it received shutdown/suspend request during
	suspend/hybernation. This patch unblocks ioctls on resume path.

Changes from V2:
None

Signed-off-by: Mahesh Rajashekhara <Mahesh.Rajashekhara@pmcs.com>
---
 drivers/scsi/aacraid/linit.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/scsi/aacraid/linit.c b/drivers/scsi/aacraid/linit.c index 37375cf..3b6e5c6 100644
--- a/drivers/scsi/aacraid/linit.c
+++ b/drivers/scsi/aacraid/linit.c
@@ -1448,6 +1448,11 @@ static int aac_resume(struct pci_dev *pdev)
 	pci_set_master(pdev);
 	if (aac_acquire_resources(aac))
 		goto fail_device;
+	/*
+	* reset this flag to unblock ioctl() as it was set at
+	* aac_send_shutdown() to block ioctls from upperlayer
+	*/
+	aac->adapter_shutdown = 0;
 	scsi_unblock_requests(shost);
 
 	return 0;
--
1.9.3

RE: [PATCH V6 08/10] [SCSI] aacraid: Send commit-config to controller firmware

[Murthy Bhat]

Reviewed-by: Murthy Bhat <Murthy.Bhat@pmcs.com>


-----Original Message-----
From: Karthikeya Sunkesula 
Sent: Tuesday, August 25, 2015 12:00 PM
To: Mahesh Rajashekhara; Tomas Henzl; JBottomley@Parallels.com; linux-scsi@vger.kernel.org
Cc: aacraid@pmc-sierra.com; Harry Yang; Rich Bono; Murthy Bhat
Subject: RE: [PATCH V6 08/10] [SCSI] aacraid: Send commit-config to controller firmware

Reviewed-by: Karthikeya Sunkesula <Karthikeya.Sunkesula@pmcs.com>


-----Original Message-----
From: Mahesh Rajashekhara 
Sent: Tuesday, August 11, 2015 11:28 AM
To: Tomas Henzl; JBottomley@Parallels.com; linux-scsi@vger.kernel.org
Cc: aacraid@pmc-sierra.com; Harry Yang; Rich Bono; Mahesh Rajashekhara
Subject: [PATCH V6 08/10] [SCSI] aacraid: Send commit-config to controller firmware

Description:
	Controller BIOS/UEFI driver used to send this request.  But for
	IBM-Power system there is no BIOS/UEFI driver.  So this change is
	required for IBM, otherwise controller will be read-only mode.

Changes from V2:
None

Signed-off-by: Mahesh Rajashekhara <Mahesh.Rajashekhara@pmcs.com>
---
 drivers/scsi/aacraid/linit.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/scsi/aacraid/linit.c b/drivers/scsi/aacraid/linit.c index 3b6e5c6..35dd849 100644
--- a/drivers/scsi/aacraid/linit.c
+++ b/drivers/scsi/aacraid/linit.c
@@ -1270,8 +1270,11 @@ static int aac_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
 		shost->max_channel = aac->maximum_num_channels;
 	else
 		shost->max_channel = 0;
-
+#if defined(__powerpc__) || defined(__PPC__) || defined(__ppc__)
+	aac_get_config_status(aac, 1);
+#else
 	aac_get_config_status(aac, 0);
+#endif
 	aac_get_containers(aac);
 	list_add(&aac->entry, insert);
 
--
1.9.3

RE: [PATCH V6 09/10] [SCSI] aacraid: Replace pci_enable_msix() with pci_enable_msix_range()

[Murthy Bhat]

Reviewed-by: Murthy Bhat <Murthy.Bhat@pmcs.com>


-----Original Message-----
From: Karthikeya Sunkesula 
Sent: Tuesday, August 25, 2015 12:00 PM
To: Mahesh Rajashekhara; Tomas Henzl; JBottomley@Parallels.com; linux-scsi@vger.kernel.org
Cc: aacraid@pmc-sierra.com; Harry Yang; Rich Bono
Subject: RE: [PATCH V6 09/10] [SCSI] aacraid: Replace pci_enable_msix() with pci_enable_msix_range()

Reviewed-by: Karthikeya Sunkesula <Karthikeya.Sunkesula@pmcs.com>


-----Original Message-----
From: Mahesh Rajashekhara 
Sent: Tuesday, August 11, 2015 11:28 AM
To: Tomas Henzl; JBottomley@Parallels.com; linux-scsi@vger.kernel.org
Cc: aacraid@pmc-sierra.com; Harry Yang; Rich Bono; Mahesh Rajashekhara
Subject: [PATCH V6 09/10] [SCSI] aacraid: Replace pci_enable_msix() with pci_enable_msix_range()

Description:
	As pci_enable_msix() deprecated, replaced with pci_enable_msix_range()

Changes from V5:
Merged 10 and 11 of V5 into this patch.
AAC_MAX_MSIX definition change.

Signed-off-by: Mahesh Rajashekhara <Mahesh.Rajashekhara@pmcs.com>
---
 drivers/scsi/aacraid/aacraid.h  |  2 +-  drivers/scsi/aacraid/comminit.c | 20 ++++++--------------
 2 files changed, 7 insertions(+), 15 deletions(-)

diff --git a/drivers/scsi/aacraid/aacraid.h b/drivers/scsi/aacraid/aacraid.h index 7b95227..2de5ebc 100644
--- a/drivers/scsi/aacraid/aacraid.h
+++ b/drivers/scsi/aacraid/aacraid.h
@@ -12,7 +12,7 @@
  *              D E F I N E S
  *----------------------------------------------------------------------------*/
 
-#define AAC_MAX_MSIX		8	/* vectors */
+#define AAC_MAX_MSIX		32	/* vectors */
 #define AAC_PCI_MSI_ENABLE	0x8000
 
 enum {
diff --git a/drivers/scsi/aacraid/comminit.c b/drivers/scsi/aacraid/comminit.c index b4b6088..0e954e3 100644
--- a/drivers/scsi/aacraid/comminit.c
+++ b/drivers/scsi/aacraid/comminit.c
@@ -338,7 +338,7 @@ static int aac_comm_init(struct aac_dev * dev)
 
 void aac_define_int_mode(struct aac_dev *dev)  {
-	int i, msi_count;
+	int i, msi_count, min_msix;
 
 	msi_count = i = 0;
 	/* max. vectors from GET_COMM_PREFERRED_SETTINGS */ @@ -366,22 +366,14 @@ void aac_define_int_mode(struct aac_dev *dev)
 
 	if (msi_count > 1 &&
 	    pci_find_capability(dev->pdev, PCI_CAP_ID_MSIX)) {
-		i = pci_enable_msix(dev->pdev,
+		min_msix = 2;
+		i = pci_enable_msix_range(dev->pdev,
 				    dev->msixentry,
+				    min_msix,
 				    msi_count);
-		 /* Check how many MSIX vectors are allocated */
-		if (i >= 0) {
+		if (i > 0) {
 			dev->msi_enabled = 1;
-			if (i) {
-				msi_count = i;
-				if (pci_enable_msix(dev->pdev,
-				    dev->msixentry,
-				    msi_count)) {
-					dev->msi_enabled = 0;
-					printk(KERN_ERR "%s%d: MSIX not supported!! Will try MSI 0x%x.\n",
-							dev->name, dev->id, i);
-				}
-			}
+			msi_count = i;
 		} else {
 			dev->msi_enabled = 0;
 			printk(KERN_ERR "%s%d: MSIX not supported!! Will try MSI 0x%x.\n",
--
1.9.3

RE: [PATCH V6 10/10] [SCSI] aacraid: Update driver version

[Murthy Bhat]

Reviewed-by: Murthy Bhat <Murthy.Bhat@pmcs.com>


-----Original Message-----
From: Karthikeya Sunkesula 
Sent: Tuesday, August 25, 2015 12:00 PM
To: Mahesh Rajashekhara; Tomas Henzl; JBottomley@Parallels.com; linux-scsi@vger.kernel.org
Cc: aacraid@pmc-sierra.com; Harry Yang; Rich Bono; Murthy Bhat
Subject: RE: [PATCH V6 10/10] [SCSI] aacraid: Update driver version

Reviewed-by: Karthikeya Sunkesula <Karthikeya.Sunkesula@pmcs.com>


-----Original Message-----
From: Mahesh Rajashekhara 
Sent: Tuesday, August 11, 2015 11:28 AM
To: Tomas Henzl; JBottomley@Parallels.com; linux-scsi@vger.kernel.org
Cc: aacraid@pmc-sierra.com; Harry Yang; Rich Bono; Mahesh Rajashekhara
Subject: [PATCH V6 10/10] [SCSI] aacraid: Update driver version

Signed-off-by: Mahesh Rajashekhara <Mahesh.Rajashekhara@pmcs.com>
---
 drivers/scsi/aacraid/aacraid.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/scsi/aacraid/aacraid.h b/drivers/scsi/aacraid/aacraid.h index 2de5ebc..074878b 100644
--- a/drivers/scsi/aacraid/aacraid.h
+++ b/drivers/scsi/aacraid/aacraid.h
@@ -62,7 +62,7 @@ enum {
 #define	PMC_GLOBAL_INT_BIT0		0x00000001
 
 #ifndef AAC_DRIVER_BUILD
-# define AAC_DRIVER_BUILD 40709
+# define AAC_DRIVER_BUILD 41010
 # define AAC_DRIVER_BRANCH "-ms"
 #endif
 #define MAXIMUM_NUM_CONTAINERS	32
--
1.9.3

Re: [PATCH V6 01/10] [SCSI] aacraid: Fix for logical device name and UID not exposed to the OS

[Tomas Henzl]

On 11.8.2015 07:58, Mahesh Rajashekhara wrote:
> Description:
> 	Driver sends the right size of the response buffer.
> 
> Changes from V2:
> None
> 
> Signed-off-by: Mahesh Rajashekhara <Mahesh.Rajashekhara@pmcs.com>
Reviewed-by: Tomas Henzl <thenzl@redhat.com>

Tomas

Re: [PATCH V6 02/10] [SCSI] aacraid: Add Power Management support

[Tomas Henzl]

On 11.8.2015 07:58, Mahesh Rajashekhara wrote:
> Description:
> 	* .suspend() and .resume() routines implemented in the driver
> 	* aac_release_resources() initiates firmware shutdown
> 	* aac_acquire_resources re-initializes the host interface
> 
> Changes from V2:
> Increased msleep(1) to msleep(20)
> Reverted pci_enable_msix_exact() to pci_enable_msix() as this change has moved into a separate patch.
> 
> Signed-off-by: Mahesh Rajashekhara <Mahesh.Rajashekhara@pmcs.com>
Reviewed-by: Tomas Henzl <thenzl@redhat.com>

Tomas

Re: [PATCH V6 03/10] [SCSI] aacraid: Change interrupt mode to MSI for series-6 controller

[Tomas Henzl]

On 11.8.2015 07:58, Mahesh Rajashekhara wrote:
> Description:
> 	This change always sets MSI interrupt mode for series-6 controller.
> 
> Changes from V2:
> aac_msi option description and subject change.
> 
> Signed-off-by: Mahesh Rajashekhara <Mahesh.Rajashekhara@pmcs.com>
Reviewed-by: Tomas Henzl <thenzl@redhat.com>

Tomas

Re: [PATCH V6 04/10] [SCSI] aacraid: Enable 64-bit write to controller register

[Tomas Henzl]

On 11.8.2015 07:58, Mahesh Rajashekhara wrote:
> Description:
> 	If writeq() not supported, then do atomic two 32bit write
> 
> Changes from V2:
> None
> 
> Signed-off-by: Mahesh Rajashekhara <Mahesh.Rajashekhara@pmcs.com>
Reviewed-by: Tomas Henzl <thenzl@redhat.com>

Tomas

Re: [PATCH V6 06/10] [SCSI] aacraid: Reset irq affinity hints before releasing irq

[Tomas Henzl]

On 11.8.2015 07:58, Mahesh Rajashekhara wrote:
> Description:
> 	Reset irq affinity hints before releasing IRQ
> 	Removed duplicate code of IRQ acquire/release
>
> Changes from V2:
> None
>
> Signed-off-by: Mahesh Rajashekhara <Mahesh.Rajashekhara@pmcs.com>

Reviewed-by: Tomas Henzl <thenzl@redhat.com>

Tomas

Re: [PATCH V6 07/10] [SCSI] aacraid: Unblock IOCTLs to controller once system resumed from suspend

[Tomas Henzl]

On 11.8.2015 07:58, Mahesh Rajashekhara wrote:
> Description:
> 	Driver blocks ioctls once it received shutdown/suspend request during
> 	suspend/hybernation. This patch unblocks ioctls on resume path.
>
> Changes from V2:
> None
>
> Signed-off-by: Mahesh Rajashekhara <Mahesh.Rajashekhara@pmcs.com>

Reviewed-by: Tomas Henzl <thenzl@redhat.com>

Tomas

Re: [PATCH V6 08/10] [SCSI] aacraid: Send commit-config to controller firmware

[Tomas Henzl]

On 11.8.2015 07:58, Mahesh Rajashekhara wrote:
> Description:
> 	Controller BIOS/UEFI driver used to send this request.  But for
> 	IBM-Power system there is no BIOS/UEFI driver.  So this change is
> 	required for IBM, otherwise controller will be read-only mode.
>
> Changes from V2:
> None
>
> Signed-off-by: Mahesh Rajashekhara <Mahesh.Rajashekhara@pmcs.com>
> ---
>  drivers/scsi/aacraid/linit.c | 5 ++++-
>  1 file changed, 4 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/scsi/aacraid/linit.c b/drivers/scsi/aacraid/linit.c
> index 3b6e5c6..35dd849 100644
> --- a/drivers/scsi/aacraid/linit.c
> +++ b/drivers/scsi/aacraid/linit.c
> @@ -1270,8 +1270,11 @@ static int aac_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
>  		shost->max_channel = aac->maximum_num_channels;
>  	else
>  		shost->max_channel = 0;
> -
> +#if defined(__powerpc__) || defined(__PPC__) || defined(__ppc__)
> +	aac_get_config_status(aac, 1);
> +#else
>  	aac_get_config_status(aac, 0);
> +#endif

If we use instead
+	aac_get_config_status(aac, 1);
on all archs will it make problems ?

Tomas

>  	aac_get_containers(aac);
>  	list_add(&aac->entry, insert);
>  

Re: [PATCH V6 09/10] [SCSI] aacraid: Replace pci_enable_msix() with pci_enable_msix_range()

[Tomas Henzl]

On 11.8.2015 07:58, Mahesh Rajashekhara wrote:
> Description:
> 	As pci_enable_msix() deprecated, replaced with pci_enable_msix_range()
>
> Changes from V5:
> Merged 10 and 11 of V5 into this patch.
> AAC_MAX_MSIX definition change.
>
> Signed-off-by: Mahesh Rajashekhara <Mahesh.Rajashekhara@pmcs.com>

Reviewed-by: Tomas Henzl <thenzl@redhat.com>

Tomas

Re: [PATCH V6 10/10] [SCSI] aacraid: Update driver version

[Tomas Henzl]

On 11.8.2015 07:58, Mahesh Rajashekhara wrote:
> Signed-off-by: Mahesh Rajashekhara <Mahesh.Rajashekhara@pmcs.com>

Reviewed-by: Tomas Henzl <thenzl@redhat.com>

Tomas

Re: [PATCH V6 08/10] [SCSI] aacraid: Send commit-config to controller firmware

[Christoph Hellwig]

On Tue, Aug 25, 2015 at 04:57:26PM +0200, Tomas Henzl wrote:
> On 11.8.2015 07:58, Mahesh Rajashekhara wrote:
> > +#if defined(__powerpc__) || defined(__PPC__) || defined(__ppc__)
> > +	aac_get_config_status(aac, 1);
> > +#else
> >  	aac_get_config_status(aac, 0);
> > +#endif
> 
> If we use instead
> +	aac_get_config_status(aac, 1);
> on all archs will it make problems ?

Yes, that should be our first choice.  If that doesn't work it should
be a #ifndef CONFIG_X86 with a comment explaining it.

RE: [PATCH V6 08/10] [SCSI] aacraid: Send commit-config to controller firmware

[Mahesh Rajashekhara]

Hi Christoph, Hi Tomas,

After discussed internally, this driver patch is required only if "auto commit" support is not available in the controller firmware.  

We have fix in the released controller firmware, so this driver patch is not needed. 

I'm removing this patch in V7.

Hi James,

As you suggested, will keep the review-tags going V6->V7 and add reviewers in CC list.

Thanks,
Mahesh

-----Original Message-----
From: Christoph Hellwig [mailto:hch@infradead.org] 
Sent: Tuesday, August 25, 2015 8:41 PM
To: Tomas Henzl
Cc: Mahesh Rajashekhara; JBottomley@Parallels.com; linux-scsi@vger.kernel.org; aacraid@pmc-sierra.com; Harry Yang; Rich Bono
Subject: Re: [PATCH V6 08/10] [SCSI] aacraid: Send commit-config to controller firmware

On Tue, Aug 25, 2015 at 04:57:26PM +0200, Tomas Henzl wrote:
> On 11.8.2015 07:58, Mahesh Rajashekhara wrote:
> > +#if defined(__powerpc__) || defined(__PPC__) || defined(__ppc__)
> > +	aac_get_config_status(aac, 1);
> > +#else
> >  	aac_get_config_status(aac, 0);
> > +#endif
> 
> If we use instead
> +	aac_get_config_status(aac, 1);
> on all archs will it make problems ?

Yes, that should be our first choice.  If that doesn't work it should be a #ifndef CONFIG_X86 with a comment explaining it.