From: Manoj Kumar <manoj@linux.vnet.ibm.com>
To: Gabriel Krisman Bertazi <krisman@linux.vnet.ibm.com>,
linux-scsi@vger.kernel.org
Cc: brking@linux.vnet.ibm.com, wenxiong@linux.vnet.ibm.com
Subject: Re: [PATCH v2 2/5] ipr: Don't set NO_ULEN_CHK bit when resource is a vset.
Date: Tue, 3 Nov 2015 14:39:36 -0600 [thread overview]
Message-ID: <56391B88.8090102@linux.vnet.ibm.com> (raw)
In-Reply-To: <1446575170-18656-2-git-send-email-krisman@linux.vnet.ibm.com>
Gabriel:
On applying this patch, I noticed that this statement
seems to be unnecessary:
else
ioarcb->cmd_pkt.flags_lo |=
IPR_FLAGS_LO_UNTAGGED_TASK;
As the value is 0x00:
#define IPR_FLAGS_LO_UNTAGGED_TASK 0x00
You can resolve this in a future update.
Reviewed-by: Manoj Kumar <manoj@linux.vnet.ibm.com>
---
Manoj Kumar
On 11/3/2015 12:26 PM, Gabriel Krisman Bertazi wrote:
> According to the IPR specification, Inhibit Underlength Checking bit
> must be disabled when issuing commands to vsets. Enabling it in this
> case might cause SCSI commands to fail with an Illegal Request, so make
> sure we keep this bit cleared when resource is a vset.
>
> Changes since v1:
> - Put gsci exclusive stuff in a separate block.
>
> Signed-off-by: Gabriel Krisman Bertazi <krisman@linux.vnet.ibm.com>
> ---
> drivers/scsi/ipr.c | 10 +++++++---
> 1 file changed, 7 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/scsi/ipr.c b/drivers/scsi/ipr.c
> index 238efab..6849b7f 100644
> --- a/drivers/scsi/ipr.c
> +++ b/drivers/scsi/ipr.c
> @@ -6363,15 +6363,19 @@ static int ipr_queuecommand(struct Scsi_Host *shost,
> ipr_cmd->scsi_cmd = scsi_cmd;
> ipr_cmd->done = ipr_scsi_eh_done;
>
> - if (ipr_is_gscsi(res) || ipr_is_vset_device(res)) {
> + if (ipr_is_gscsi(res)) {
> if (scsi_cmd->underflow == 0)
> ioarcb->cmd_pkt.flags_hi |= IPR_FLAGS_HI_NO_ULEN_CHK;
>
> - ioarcb->cmd_pkt.flags_hi |= IPR_FLAGS_HI_NO_LINK_DESC;
> - if (ipr_is_gscsi(res) && res->reset_occurred) {
> + if (res->reset_occurred) {
> res->reset_occurred = 0;
> ioarcb->cmd_pkt.flags_lo |= IPR_FLAGS_LO_DELAY_AFTER_RST;
> }
> + }
> +
> + if (ipr_is_gscsi(res) || ipr_is_vset_device(res)) {
> + ioarcb->cmd_pkt.flags_hi |= IPR_FLAGS_HI_NO_LINK_DESC;
> +
> ioarcb->cmd_pkt.flags_lo |= IPR_FLAGS_LO_ALIGNED_BFR;
> if (scsi_cmd->flags & SCMD_TAGGED)
> ioarcb->cmd_pkt.flags_lo |= IPR_FLAGS_LO_SIMPLE_TASK;
>
next prev parent reply other threads:[~2015-11-03 20:39 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-11-03 18:26 [PATCH v2 1/5] ipr: Add delay to ensure coherent dumps Gabriel Krisman Bertazi
2015-11-03 18:26 ` [PATCH v2 2/5] ipr: Don't set NO_ULEN_CHK bit when resource is a vset Gabriel Krisman Bertazi
2015-11-03 20:39 ` Manoj Kumar [this message]
2015-11-04 2:52 ` Brian King
2015-11-04 18:50 ` wenxiong
2015-11-03 18:26 ` [PATCH v2 3/5] ipr: Inquiry IOA page 0xC4 during initialization Gabriel Krisman Bertazi
2015-11-04 2:53 ` Brian King
2015-11-04 18:51 ` wenxiong
2015-11-03 18:26 ` [PATCH v2 4/5] ipr: Issue Configure Cache Parameters command Gabriel Krisman Bertazi
2015-11-04 2:53 ` Brian King
2015-11-04 18:52 ` wenxiong
2015-11-03 18:26 ` [PATCH v2 5/5] ipr: Driver version 2.6.3 Gabriel Krisman Bertazi
2015-11-04 2:53 ` Brian King
2015-11-04 18:51 ` wenxiong
2015-11-04 2:52 ` [PATCH v2 1/5] ipr: Add delay to ensure coherent dumps Brian King
2015-11-04 18:51 ` wenxiong
2015-11-10 0:34 ` Martin K. Petersen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=56391B88.8090102@linux.vnet.ibm.com \
--to=manoj@linux.vnet.ibm.com \
--cc=brking@linux.vnet.ibm.com \
--cc=krisman@linux.vnet.ibm.com \
--cc=linux-scsi@vger.kernel.org \
--cc=wenxiong@linux.vnet.ibm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox