* UFS Help: OCS is returning invalid (0x7)
@ 2016-01-27 16:58 Joao Pinto
0 siblings, 0 replies; only message in thread
From: Joao Pinto @ 2016-01-27 16:58 UTC (permalink / raw)
To: akinobu.mita, hch, ygardi, Gilad Broner, Subhash Jadavani
Cc: linux-scsi, Carlos Palminha
Hi!
I am currently working in the implementation of DesignWare Quirks in the
existing UFS core and implementing a glue platform driver.
The project status is the following:
- Synopsys MPHY Test Chip is well configured
- Link is up in Host & Device (validated through the 0xd083 register)
- Additional connection setup are made successfully
- HBA is operational
- NOP_OUT is failing with OCS = 0x7
The OCS value is calculated in ufshcd_get_tr_ocs() in ufshcd.c.
I made a dump of the UTRD pointer where we can check the status = 7 ([2]).
UTRD at: 7007c3e0
@0000 [0]:21000000
@0004 [1]:93936a6a
@0008 [2]:00000007
@000c [3]:93936a6a
@0010 [4]:9f317400
@0014 [5]:00000000
@0018 [6]:00800080
@001c [7]:01006a6a
Did anyone have the same problem? Any hints to overcome this issue?
Thank you very much for your help!
Joao
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2016-01-27 16:58 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2016-01-27 16:58 UFS Help: OCS is returning invalid (0x7) Joao Pinto
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).