Re: [v2 PATCH 2/3] scsi:stex.c Add hotplug support

[Charles Chiou <ch1102chiou@gmail.com>]

Hi all, Ping?
Does this patch has others issues need to fix? Thank you.
Charles

On 09/03/2015 10:01 PM, Johannes Thumshirn wrote:
> Charles Chiou <ch1102chiou@gmail.com> writes:
>
>>  From 60e14c245c18cbe0300cfa244334e2850a52a381 Mon Sep 17 00:00:00 2001
>> From: Charles <charles.chiou@tw.promise.com>
>> Date: Wed, 2 Sep 2015 20:48:55 +0800
>> Subject: [PATCH 2/3] scsi:stex.c Add hotplug support
>>
>> 1. Add hotplug support. Pegasus support surprise removal. To this end, I
>>     use return_abnormal_state function to return DID_NO_CONNECT for all
>>        commands which sent to driver.
>>
>> 2. Remove stex_hba_stop in stex_remove because we cannot send command to
>>     device after hotplug.
>>
>> 3. Add new device status:  MU_STATE_STOP, MU_STATE_NOCONNECT,
>>     MU_STATE_STOP. MU_STATE_STOP is currently not referenced.
>>     MU_STATE_NOCONNECT represent that device is plugged out from the host.
>>
>> 4. Use return_abnormal_function() to substitute part of code in stex_do_reset.
>>
>> V2: N/A
>>
>> Signed-off-by: Charles Chiou <charles.chiou@tw.promise.com>
>> ---
>>   drivers/scsi/stex.c | 53 ++++++++++++++++++++++++++++++++++-------------------
>>   1 file changed, 34 insertions(+), 19 deletions(-)
>>
>> diff --git a/drivers/scsi/stex.c b/drivers/scsi/stex.c
>> index 0c93f1f..4ef0c80 100644
>> --- a/drivers/scsi/stex.c
>> +++ b/drivers/scsi/stex.c
>> @@ -83,6 +83,8 @@ enum {
>>   	MU_STATE_STARTED			= 2,
>>   	MU_STATE_RESETTING			= 3,
>>   	MU_STATE_FAILED				= 4,
>> +	MU_STATE_STOP				= 5,
>> +	MU_STATE_NOCONNECT			= 6,
>>
>>   	MU_MAX_DELAY				= 120,
>>   	MU_HANDSHAKE_SIGNATURE			= 0x55aaaa55,
>> @@ -544,6 +546,27 @@ stex_ss_send_cmd(struct st_hba *hba, struct req_msg *req,
>> u16 tag)
>>   	readl(hba->mmio_base + YH2I_REQ); /* flush */
>>   }
>>
>> +static void return_abnormal_state(struct st_hba *hba, int status)
>> +{
>> +	struct st_ccb *ccb;
>> +	unsigned long flags;
>> +	u16 tag;
>> +
>> +	spin_lock_irqsave(hba->host->host_lock, flags);
>> +	for (tag = 0; tag < hba->host->can_queue; tag++) {
>> +		ccb = &hba->ccb[tag];
>> +		if (ccb->req == NULL)
>> +			continue;
>> +		ccb->req = NULL;
>> +		if (ccb->cmd) {
>> +			scsi_dma_unmap(ccb->cmd);
>> +			ccb->cmd->result = status << 16;
>> +			ccb->cmd->scsi_done(ccb->cmd);
>> +			ccb->cmd = NULL;
>> +		}
>> +	}
>> +	spin_unlock_irqrestore(hba->host->host_lock, flags);
>> +}
>>   static int
>>   stex_slave_config(struct scsi_device *sdev)
>>   {
>> @@ -567,8 +590,12 @@ stex_queuecommand_lck(struct scsi_cmnd *cmd, void
>> (*done)(struct scsi_cmnd *))
>>   	id = cmd->device->id;
>>   	lun = cmd->device->lun;
>>   	hba = (struct st_hba *) &host->hostdata[0];
>> -
>> -	if (unlikely(hba->mu_status == MU_STATE_RESETTING))
>> +	if (hba->mu_status == MU_STATE_NOCONNECT) {
>> +		cmd->result = DID_NO_CONNECT;
>> +		done(cmd);
>> +		return 0;
>> +	}
>> +	if (unlikely(hba->mu_status != MU_STATE_STARTED))
>>   		return SCSI_MLQUEUE_HOST_BUSY;
>>
>>   	switch (cmd->cmnd[0]) {
>> @@ -1267,10 +1294,8 @@ static void stex_ss_reset(struct st_hba *hba)
>>
>>   static int stex_do_reset(struct st_hba *hba)
>>   {
>> -	struct st_ccb *ccb;
>>   	unsigned long flags;
>>   	unsigned int mu_status = MU_STATE_RESETTING;
>> -	u16 tag;
>>
>>   	spin_lock_irqsave(hba->host->host_lock, flags);
>>   	if (hba->mu_status == MU_STATE_STARTING) {
>> @@ -1304,20 +1329,8 @@ static int stex_do_reset(struct st_hba *hba)
>>   	else if (hba->cardtype == st_yel)
>>   		stex_ss_reset(hba);
>>
>> -	spin_lock_irqsave(hba->host->host_lock, flags);
>> -	for (tag = 0; tag < hba->host->can_queue; tag++) {
>> -		ccb = &hba->ccb[tag];
>> -		if (ccb->req == NULL)
>> -			continue;
>> -		ccb->req = NULL;
>> -		if (ccb->cmd) {
>> -			scsi_dma_unmap(ccb->cmd);
>> -			ccb->cmd->result = DID_RESET << 16;
>> -			ccb->cmd->scsi_done(ccb->cmd);
>> -			ccb->cmd = NULL;
>> -		}
>> -	}
>> -	spin_unlock_irqrestore(hba->host->host_lock, flags);
>> +
>> +	return_abnormal_state(hba, DID_RESET);
>>
>>   	if (stex_handshake(hba) == 0)
>>   		return 0;
>> @@ -1786,9 +1799,11 @@ static void stex_remove(struct pci_dev *pdev)
>>   {
>>   	struct st_hba *hba = pci_get_drvdata(pdev);
>>
>> +	hba->mu_status = MU_STATE_NOCONNECT;
>> +	return_abnormal_state(hba, DID_NO_CONNECT);
>>   	scsi_remove_host(hba->host);
>>
>> -	stex_hba_stop(hba);
>> +	scsi_block_requests(hba->host);
>>
>>   	stex_hba_free(hba);
>
> Looks OK to me, so
> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
>