linux-scsi.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Charles Chiou <ch1102chiou@gmail.com>
To: Johannes Thumshirn <jthumshirn@suse.de>
Cc: Christoph Hellwig <hch@infradead.org>,
	JBottomley@parallels.com, Oliver Neukum <oneukum@suse.de>,
	grace.chang@tw.promise.com, linus.chen@tw.promise.com,
	victor.p@promise.com, linux-scsi@vger.kernel.org,
	linux-kernel@vger.kernel.org, eva.cheng@tw.promise.com
Subject: [Resend PATCH 3/3] scsi:stex.c Add S3/S4 support
Date: Thu, 04 Feb 2016 19:22:59 +0800	[thread overview]
Message-ID: <56B33493.80300@gmail.com> (raw)
In-Reply-To: <56AB4BBD.2030702@gmail.com>

 From f442518879f8f41d103b684046d912eca13844e7 Mon Sep 17 00:00:00 2001
From: Charles <charles.chiou@tw.promise.com>
Date: Wed, 2 Sep 2015 20:54:45 +0800
Subject: [PATCH 3/3] scsi:stex.c Add S3/S4 support

Add S3/S4 support, add .suspend and .resume function in pci_driver.
In .suspend handler, driver send S3/S4 signal to the device.

V2: Remove blank lines

Signed-off-by: Charles Chiou <charles.chiou@tw.promise.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>

---
   drivers/scsi/stex.c | 59 
++++++++++++++++++++++++++++++++++++++++++++++++++---
   1 file changed, 56 insertions(+), 3 deletions(-)

diff --git a/drivers/scsi/stex.c b/drivers/scsi/stex.c
index 4ef0c80..c96a86d 100644
--- a/drivers/scsi/stex.c
+++ b/drivers/scsi/stex.c
@@ -166,6 +166,13 @@ enum {

       ST_ADDITIONAL_MEM            = 0x200000,
       ST_ADDITIONAL_MEM_MIN            = 0x80000,
+    PMIC_SHUTDOWN                = 0x0D,
+    PMIC_REUMSE                    = 0x10,
+    ST_IGNORED                    = -1,
+    ST_S3                        = 3,
+    ST_S4                        = 4,
+    ST_S5                        = 5,
+    ST_S6                        = 6,
   };

   struct st_sgitem {
@@ -1733,7 +1740,7 @@ out_disable:
       return err;
   }

-static void stex_hba_stop(struct st_hba *hba)
+static void stex_hba_stop(struct st_hba *hba, int st_sleep_mic)
   {
       struct req_msg *req;
       struct st_msg_header *msg_h;
@@ -1749,11 +1756,18 @@ static void stex_hba_stop(struct st_hba *hba)
       } else
           memset(req, 0, hba->rq_size);

-    if (hba->cardtype == st_yosemite || hba->cardtype == st_yel) {
+    if ((hba->cardtype == st_yosemite || hba->cardtype == st_yel)
+        && st_sleep_mic == ST_IGNORED) {
           req->cdb[0] = MGT_CMD;
           req->cdb[1] = MGT_CMD_SIGNATURE;
           req->cdb[2] = CTLR_CONFIG_CMD;
           req->cdb[3] = CTLR_SHUTDOWN;
+    } else if (hba->cardtype == st_yel && st_sleep_mic != ST_IGNORED) {
+        req->cdb[0] = MGT_CMD;
+        req->cdb[1] = MGT_CMD_SIGNATURE;
+        req->cdb[2] = CTLR_CONFIG_CMD;
+        req->cdb[3] = PMIC_SHUTDOWN;
+        req->cdb[4] = st_sleep_mic;
       } else {
           req->cdb[0] = CONTROLLER_CMD;
           req->cdb[1] = CTLR_POWER_STATE_CHANGE;
@@ -1773,10 +1787,12 @@ static void stex_hba_stop(struct st_hba *hba)
       while (hba->ccb[tag].req_type & PASSTHRU_REQ_TYPE) {
           if (time_after(jiffies, before + ST_INTERNAL_TIMEOUT * HZ)) {
               hba->ccb[tag].req_type = 0;
+            hba->mu_status = MU_STATE_STOP;
               return;
           }
           msleep(1);
       }
+    hba->mu_status = MU_STATE_STOP;
   }

   static void stex_hba_free(struct st_hba *hba)
@@ -1816,9 +1832,44 @@ static void stex_shutdown(struct pci_dev *pdev)
   {
       struct st_hba *hba = pci_get_drvdata(pdev);

-    stex_hba_stop(hba);
+    if (hba->supports_pm == 0)
+        stex_hba_stop(hba, ST_IGNORED);
+    else
+        stex_hba_stop(hba, ST_S5);
+}
+
+static int stex_choice_sleep_mic(pm_message_t state)
+{
+    switch (state.event) {
+    case PM_EVENT_SUSPEND:
+        return ST_S3;
+    case PM_EVENT_FREEZE:
+    case PM_EVENT_HIBERNATE:
+        return ST_S4;
+    default:
+        return ST_S4;
+    }
+}
+
+static int stex_suspend(struct pci_dev *pdev, pm_message_t state)
+{
+    struct st_hba *hba = pci_get_drvdata(pdev);
+
+    if (hba->cardtype == st_yel && hba->supports_pm == 1)
+        stex_hba_stop(hba, stex_choice_sleep_mic(state));
+    else
+        stex_hba_stop(hba, ST_IGNORED);
+    return 0;
   }

+static int stex_resume(struct pci_dev *pdev)
+{
+    struct st_hba *hba = pci_get_drvdata(pdev);
+
+    hba->mu_status = MU_STATE_STARTING;
+    stex_handshake(hba);
+    return 0;
+}
   MODULE_DEVICE_TABLE(pci, stex_pci_tbl);

   static struct pci_driver stex_pci_driver = {
@@ -1827,6 +1878,8 @@ static struct pci_driver stex_pci_driver = {
       .probe        = stex_probe,
       .remove        = stex_remove,
       .shutdown    = stex_shutdown,
+    .suspend    = stex_suspend,
+    .resume        = stex_resume,
   };

   static int __init stex_init(void)

  reply	other threads:[~2016-02-04 11:22 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-09-03 12:39 [PATCH 3/3] scsi:stex.c Add S3/S4 support Charles Chiou
2015-09-03 14:03 ` Johannes Thumshirn
2016-01-29 11:23   ` Charles Chiou
2016-02-04 11:22     ` Charles Chiou [this message]
2016-02-04 11:37       ` [Resend PATCH " Oliver Neukum
2016-02-22  2:38         ` Charles Chiou

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=56B33493.80300@gmail.com \
    --to=ch1102chiou@gmail.com \
    --cc=JBottomley@parallels.com \
    --cc=eva.cheng@tw.promise.com \
    --cc=grace.chang@tw.promise.com \
    --cc=hch@infradead.org \
    --cc=jthumshirn@suse.de \
    --cc=linus.chen@tw.promise.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-scsi@vger.kernel.org \
    --cc=oneukum@suse.de \
    --cc=victor.p@promise.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).