From: Israel Mouton <lebanon87@myrealbox.com>
To: linux-scsi@vger.kernel.org
Subject: Ultra320 drive detected as narrow SCSI by adapter
Date: Sun, 24 Sep 2006 17:20:17 -0700 (PDT) [thread overview]
Message-ID: <6478431.post@talk.nabble.com> (raw)
While my adapter card is scanning for devices, it detects my Maxtor Atlas V
as a narrow drive; however, it is an Ultra320. This setup was working fine
until a few days ago, when adapter began detecting it as a narrow SCSI. Now
the disk can only transfer at about 10-20MB/s. My adapter card is an LSI
53C1030 and is PCI-X. If any one can help, I will be extremely grateful.
I also included my dmesg concerning SCSI devices output below.
mptbase: Initiating ioc0 bringup
ioc0: 53C1030: Capabilities={Initiator}
scsi0 : ioc0: LSI53C1030, FwRev=01030f00h, Ports=1, MaxQ=222, IRQ=9
Vendor: MAXTOR Model: ATLAS10K5_147SCA Rev: JNX0
Type: Direct-Access ANSI SCSI revision: 03
SCSI device sda: 287332384 512-byte hdwr sectors (147114 MB)
sda: Write Protect is off
sda: Mode Sense: bf 00 10 08
SCSI device sda: drive cache: write back w/ FUA
SCSI device sda: 287332384 512-byte hdwr sectors (147114 MB)
sda: Write Protect is off
sda: Mode Sense: bf 00 10 08
SCSI device sda: drive cache: write back w/ FUA
sda: sda1 sda2 < sda5 sda6 >
sd 0:0:0:0: Attached scsi disk sda
sd 0:0:0:0: Attached scsi generic sg0 type 0
--
View this message in context: http://www.nabble.com/Ultra320-drive-detected-as-narrow-SCSI-by-adapter-tf2328646.html#a6478431
Sent from the linux-scsi mailing list archive at Nabble.com.
next reply other threads:[~2006-09-25 0:20 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-09-25 0:20 Israel Mouton [this message]
2006-09-25 1:31 ` Ultra320 drive detected as narrow SCSI by adapter James Bottomley
2006-09-25 2:57 ` Israel Mouton
2006-09-25 3:32 ` James Bottomley
2006-09-25 4:46 ` Israel Mouton
-- strict thread matches above, loose matches on Subject: below --
2006-09-25 15:57 Moore, Eric
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=6478431.post@talk.nabble.com \
--to=lebanon87@myrealbox.com \
--cc=linux-scsi@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox