From: Hannes Reinecke <hare@suse.com>
To: Nilesh Javali <njavali@marvell.com>, martin.petersen@oracle.com
Cc: linux-scsi@vger.kernel.org, GR-FC-Storage-Upstream@marvell.com,
agurumurthy@marvell.com, emilne@redhat.com, jmeneghi@redhat.com
Subject: Re: [PATCH v2 09/60] scsi: qla2xxx: Add 128-byte IOCB definitions for 29xx
Date: Fri, 12 Jun 2026 13:01:30 +0200 [thread overview]
Message-ID: <71db787e-26ce-48e1-89e2-e52c02b0adab@suse.com> (raw)
In-Reply-To: <20260612095333.1666592-10-njavali@marvell.com>
On 6/12/26 11:52, Nilesh Javali wrote:
> From: Anil Gurumurthy <agurumurthy@marvell.com>
>
> The 29xx series uses 128-byte IOCBs instead of the 64-byte IOCBs
> used by earlier adapters. Add a new header (qla_fw29.h) with the
> extended IOCB structure definitions that match the 29xx firmware
> interface.
>
> Signed-off-by: Anil Gurumurthy <agurumurthy@marvell.com>
> Signed-off-by: Nilesh Javali <njavali@marvell.com>
> ---
> drivers/scsi/qla2xxx/qla_fw29.h | 725 ++++++++++++++++++++++++++++++++
> 1 file changed, 725 insertions(+)
> create mode 100644 drivers/scsi/qla2xxx/qla_fw29.h
>
Reviewed-by: Hannes Reinecke <hare@kernel.org>
Cheers,
Hannes
--
Dr. Hannes Reinecke Kernel Storage Architect
hare@suse.com +49 911 74053 688
SUSE Software Solutions GmbH, Frankenstr. 146, 90461 Nürnberg
HRB 36809 (AG Nürnberg), GF: I. Totev, A. McDonald, W. Knoblich
next prev parent reply other threads:[~2026-06-12 11:01 UTC|newest]
Thread overview: 154+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-06-12 9:52 [PATCH v2 00/60] scsi: qla2xxx: Add QLA29xx series adapter support Nilesh Javali
2026-06-12 9:52 ` [PATCH v2 01/60] scsi: qla2xxx: Add 29xx series PCI device ID support Nilesh Javali
2026-06-12 10:30 ` sashiko-bot
2026-06-12 10:40 ` Hannes Reinecke
2026-06-12 9:52 ` [PATCH v2 02/60] scsi: qla2xxx: Add flash read/write interface for 29xx Nilesh Javali
2026-06-12 10:16 ` sashiko-bot
2026-06-12 10:43 ` Hannes Reinecke
2026-06-12 9:52 ` [PATCH v2 03/60] scsi: qla2xxx: Add NVRAM config support for 29xx adapters Nilesh Javali
2026-06-12 10:46 ` Hannes Reinecke
2026-06-12 9:52 ` [PATCH v2 04/60] scsi: qla2xxx: Add get_flash_version " Nilesh Javali
2026-06-12 10:18 ` sashiko-bot
2026-06-12 10:48 ` Hannes Reinecke
2026-06-12 9:52 ` [PATCH v2 05/60] scsi: qla2xxx: Add 29xx support in queue initialisation path Nilesh Javali
2026-06-12 10:17 ` sashiko-bot
2026-06-12 10:49 ` Hannes Reinecke
2026-06-12 9:52 ` [PATCH v2 06/60] scsi: qla2xxx: Add FC operational firmware load for 29xx Nilesh Javali
2026-06-12 10:14 ` sashiko-bot
2026-06-12 10:52 ` Hannes Reinecke
2026-06-12 9:52 ` [PATCH v2 07/60] scsi: qla2xxx: Add flash block read/write BSG support " Nilesh Javali
2026-06-12 10:11 ` sashiko-bot
2026-06-12 10:55 ` Hannes Reinecke
2026-06-12 9:52 ` [PATCH v2 08/60] scsi: qla2xxx: Add BSG MPI firmware load/dump " Nilesh Javali
2026-06-12 10:14 ` sashiko-bot
2026-06-12 10:57 ` Hannes Reinecke
2026-06-12 9:52 ` [PATCH v2 09/60] scsi: qla2xxx: Add 128-byte IOCB definitions " Nilesh Javali
2026-06-12 11:01 ` Hannes Reinecke [this message]
2026-06-12 9:52 ` [PATCH v2 10/60] scsi: qla2xxx: Add extended status continuation and marker IOCBs Nilesh Javali
2026-06-12 11:02 ` Hannes Reinecke
2026-06-12 9:52 ` [PATCH v2 11/60] scsi: qla2xxx: Remove duplicate flash memo block definitions Nilesh Javali
2026-06-12 11:03 ` Hannes Reinecke
2026-06-12 9:52 ` [PATCH v2 12/60] scsi: qla2xxx: Update IO path to use 128-byte IOCBs for 29xx Nilesh Javali
2026-06-12 10:29 ` sashiko-bot
2026-06-12 11:12 ` Hannes Reinecke
2026-06-12 9:52 ` [PATCH v2 13/60] scsi: qla2xxx: Replace IS_QLA29XX() size checks with entry-size helpers Nilesh Javali
2026-06-12 11:14 ` Hannes Reinecke
2026-06-12 9:52 ` [PATCH v2 14/60] scsi: qla2xxx: Skip image-set-valid attribute for 29xx Nilesh Javali
2026-06-12 11:14 ` Hannes Reinecke
2026-06-12 9:52 ` [PATCH v2 15/60] scsi: qla2xxx: Skip unsupported sysfs attributes " Nilesh Javali
2026-06-12 10:28 ` sashiko-bot
2026-06-12 11:15 ` Hannes Reinecke
2026-06-12 9:52 ` [PATCH v2 16/60] scsi: qla2xxx: Enable get_fw_version mailbox " Nilesh Javali
2026-06-12 10:31 ` sashiko-bot
2026-06-12 11:16 ` Hannes Reinecke
2026-06-12 9:52 ` [PATCH v2 17/60] scsi: qla2xxx: Extend execute_fw mailbox to include 29xx Nilesh Javali
2026-06-12 10:25 ` sashiko-bot
2026-06-12 11:17 ` Hannes Reinecke
2026-06-12 9:52 ` [PATCH v2 18/60] scsi: qla2xxx: Enable get_adapter_id mailbox for 29xx Nilesh Javali
2026-06-12 11:18 ` Hannes Reinecke
2026-06-12 9:52 ` [PATCH v2 19/60] scsi: qla2xxx: Enable init_firmware " Nilesh Javali
2026-06-12 11:18 ` Hannes Reinecke
2026-06-12 9:52 ` [PATCH v2 20/60] scsi: qla2xxx: Enable get_firmware_state " Nilesh Javali
2026-06-12 11:19 ` Hannes Reinecke
2026-06-12 11:22 ` sashiko-bot
2026-06-12 9:52 ` [PATCH v2 21/60] scsi: qla2xxx: Enable serdes, resource count and FCE trace " Nilesh Javali
2026-06-12 10:38 ` sashiko-bot
2026-06-12 11:19 ` Hannes Reinecke
2026-06-12 9:52 ` [PATCH v2 22/60] scsi: qla2xxx: Enable set_els_cmds and echo_test " Nilesh Javali
2026-06-12 11:20 ` Hannes Reinecke
2026-06-12 9:52 ` [PATCH v2 23/60] scsi: qla2xxx: Add support for QLA29XX in data rate functions Nilesh Javali
2026-06-12 11:20 ` Hannes Reinecke
2026-06-12 9:52 ` [PATCH v2 24/60] scsi: qla2xxx: Enable qla2x00_shutdown for 29xx Nilesh Javali
2026-06-12 11:21 ` Hannes Reinecke
2026-06-12 9:52 ` [PATCH v2 25/60] scsi: qla2xxx: Use ring-slot helpers in __qla2x00_alloc_iocbs Nilesh Javali
2026-06-12 10:41 ` sashiko-bot
2026-06-12 11:21 ` Hannes Reinecke
2026-06-12 9:52 ` [PATCH v2 26/60] scsi: qla2xxx: Add support for QLA29XX in memory allocation Nilesh Javali
2026-06-12 10:40 ` sashiko-bot
2026-06-12 11:22 ` Hannes Reinecke
2026-06-12 9:53 ` [PATCH v2 27/60] scsi: qla2xxx: Refactor marker IOCB handling for 29xx series Nilesh Javali
2026-06-12 11:36 ` Hannes Reinecke
2026-06-12 9:53 ` [PATCH v2 28/60] scsi: qla2xxx: Handle sts_cont_entry_ext_t for 29xx adapters Nilesh Javali
2026-06-12 10:54 ` sashiko-bot
2026-06-12 11:47 ` Hannes Reinecke
2026-06-12 9:53 ` [PATCH v2 29/60] scsi: qla2xxx: Update handling of status entries for 29xx series Nilesh Javali
2026-06-12 10:44 ` sashiko-bot
2026-06-12 12:12 ` Hannes Reinecke
2026-06-12 9:53 ` [PATCH v2 30/60] scsi: qla2xxx: Enhance ct_entry_24xx_ext iocb handling " Nilesh Javali
2026-06-12 12:14 ` Hannes Reinecke
2026-06-12 9:53 ` [PATCH v2 31/60] scsi: qla2xxx: Enhance purex_entry " Nilesh Javali
2026-06-12 10:54 ` sashiko-bot
2026-06-12 12:16 ` Hannes Reinecke
2026-06-12 9:53 ` [PATCH v2 32/60] scsi: qla2xxx: Update handling of ELS IOCBs " Nilesh Javali
2026-06-12 12:33 ` Hannes Reinecke
2026-06-12 9:53 ` [PATCH v2 33/60] scsi: qla2xxx: Add size check for ELS status entry layout on 29xx Nilesh Javali
2026-06-12 12:34 ` Hannes Reinecke
2026-06-12 9:53 ` [PATCH v2 34/60] scsi: qla2xxx: Add 29xx extended logio IOCB support Nilesh Javali
2026-06-12 12:36 ` Hannes Reinecke
2026-06-12 9:53 ` [PATCH v2 35/60] scsi: qla2xxx: Enhance task management IOCB handling for 29xx series Nilesh Javali
2026-06-12 11:13 ` sashiko-bot
2026-06-12 12:37 ` Hannes Reinecke
2026-06-12 9:53 ` [PATCH v2 36/60] scsi: qla2xxx: Add abort command " Nilesh Javali
2026-06-12 11:15 ` sashiko-bot
2026-06-12 12:38 ` Hannes Reinecke
2026-06-12 9:53 ` [PATCH v2 37/60] scsi: qla2xxx: Enhance ABTS processing " Nilesh Javali
2026-06-12 12:41 ` Hannes Reinecke
2026-06-12 15:12 ` sashiko-bot
2026-06-12 9:53 ` [PATCH v2 38/60] scsi: qla2xxx: Update VP control IOCB handling " Nilesh Javali
2026-06-12 12:45 ` Hannes Reinecke
2026-06-12 9:53 ` [PATCH v2 39/60] scsi: qla2xxx: Add build-time size check for VP config IOCB layout Nilesh Javali
2026-06-12 12:45 ` Hannes Reinecke
2026-06-12 9:53 ` [PATCH v2 40/60] scsi: qla2xxx: Add size check for extended VP report ID entry Nilesh Javali
2026-06-12 11:05 ` sashiko-bot
2026-06-12 12:46 ` Hannes Reinecke
2026-06-12 9:53 ` [PATCH v2 41/60] scsi: qla2xxx: Unify NVMe IOCB build path for 29xx and legacy adapters Nilesh Javali
2026-06-12 11:02 ` sashiko-bot
2026-06-12 12:49 ` Hannes Reinecke
2026-06-12 9:53 ` [PATCH v2 42/60] scsi: qla2xxx: Add LS4 pass-through IOCB handling for 29xx series Nilesh Javali
2026-06-12 12:50 ` Hannes Reinecke
2026-06-12 9:53 ` [PATCH v2 43/60] scsi: qla2xxx: Convert NVMe ring advance to use qla_req_ring_advance() Nilesh Javali
2026-06-12 12:52 ` Hannes Reinecke
2026-06-12 9:53 ` [PATCH v2 44/60] scsi: qla2xxx: Adjust feature gating in BSG paths for 29xx support Nilesh Javali
2026-06-12 11:16 ` sashiko-bot
2026-06-12 12:53 ` Hannes Reinecke
2026-06-12 9:53 ` [PATCH v2 45/60] scsi: qla2xxx: Fix queue teardown NULL dma_free and bitmap locking Nilesh Javali
2026-06-12 12:56 ` Hannes Reinecke
2026-06-12 13:23 ` sashiko-bot
2026-06-12 9:53 ` [PATCH v2 46/60] scsi: qla2xxx: Replace __le16 bitfields with scalar and accessors Nilesh Javali
2026-06-12 12:57 ` Hannes Reinecke
2026-06-12 9:53 ` [PATCH v2 47/60] scsi: qla2xxx: Fix endianness annotations in vp_rpt_id_entry structures Nilesh Javali
2026-06-12 12:59 ` Hannes Reinecke
2026-06-12 9:53 ` [PATCH v2 48/60] scsi: qla2xxx: Use 64-bit FPM word counters for 29xx host stats Nilesh Javali
2026-06-12 13:00 ` Hannes Reinecke
2026-06-12 9:53 ` [PATCH v2 49/60] scsi: qla2xxx: Add 64G/128G port speed setting support Nilesh Javali
2026-06-12 13:02 ` Hannes Reinecke
2026-06-12 9:53 ` [PATCH v2 50/60] scsi: qla2xxx: Fix 64G link speed reporting in get_data_rate Nilesh Javali
2026-06-12 13:03 ` Hannes Reinecke
2026-06-12 9:53 ` [PATCH v2 51/60] scsi: qla2xxx: edif: Fix NULL pointer deref in RX SA delete check Nilesh Javali
2026-06-12 11:43 ` sashiko-bot
2026-06-12 13:04 ` Hannes Reinecke
2026-06-12 9:53 ` [PATCH v2 52/60] scsi: qla2xxx: Fix Name Server logout detection on FWI2 adapters Nilesh Javali
2026-06-12 13:08 ` Hannes Reinecke
2026-06-12 9:53 ` [PATCH v2 53/60] scsi: qla2xxx: Bound VP index against VP_CTRL IOCB bitmap size Nilesh Javali
2026-06-12 11:35 ` sashiko-bot
2026-06-12 13:09 ` Hannes Reinecke
2026-06-12 9:53 ` [PATCH v2 54/60] scsi: qla2xxx: Check entry_status in qla24xx_modify_vp_config() Nilesh Javali
2026-06-12 13:10 ` Hannes Reinecke
2026-06-12 9:53 ` [PATCH v2 55/60] scsi: qla2xxx: Hold vport reference in qla24xx_report_id_acquisition() Nilesh Javali
2026-06-12 11:38 ` sashiko-bot
2026-06-12 13:10 ` Hannes Reinecke
2026-06-12 9:53 ` [PATCH v2 56/60] scsi: qla2xxx: Initialize NVMe abort_work once at submission Nilesh Javali
2026-06-12 11:34 ` sashiko-bot
2026-06-12 13:11 ` Hannes Reinecke
2026-06-12 9:53 ` [PATCH v2 57/60] scsi: qla2xxx: Hold qpair lock when sending NVMe LS reject Nilesh Javali
2026-06-12 11:39 ` sashiko-bot
2026-06-12 13:11 ` Hannes Reinecke
2026-06-12 9:53 ` [PATCH v2 58/60] scsi: qla2xxx: Zero dport diagnostics buffer to avoid info leak Nilesh Javali
2026-06-12 11:40 ` sashiko-bot
2026-06-12 13:12 ` Hannes Reinecke
2026-06-12 9:53 ` [PATCH v2 59/60] scsi: qla2xxx: Fix BSG job leak on validate flash image error path Nilesh Javali
2026-06-12 11:38 ` sashiko-bot
2026-06-12 13:12 ` Hannes Reinecke
2026-06-12 9:53 ` [PATCH v2 60/60] scsi: qla2xxx: Bound image count in qla2x00_update_fru_versions() Nilesh Javali
2026-06-12 11:45 ` sashiko-bot
2026-06-12 13:13 ` Hannes Reinecke
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=71db787e-26ce-48e1-89e2-e52c02b0adab@suse.com \
--to=hare@suse.com \
--cc=GR-FC-Storage-Upstream@marvell.com \
--cc=agurumurthy@marvell.com \
--cc=emilne@redhat.com \
--cc=jmeneghi@redhat.com \
--cc=linux-scsi@vger.kernel.org \
--cc=martin.petersen@oracle.com \
--cc=njavali@marvell.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox