From mboxrd@z Thu Jan 1 00:00:00 1970 From: support Subject: Re[2]: Megaraid problem. Date: Thu, 13 May 2004 08:40:31 +0200 Sender: linux-scsi-owner@vger.kernel.org Message-ID: <744578064.20040513084031@degrp.de> References: <1269894521.20040510145117@degrp.de> Reply-To: support Mime-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-15 Content-Transfer-Encoding: QUOTED-PRINTABLE Return-path: Received: from mail.degrp.org ([62.225.179.11]:7436 "EHLO mail.degrp.de") by vger.kernel.org with ESMTP id S263826AbUEMGkl (ORCPT ); Thu, 13 May 2004 02:40:41 -0400 In-Reply-To: List-Id: linux-scsi@vger.kernel.org To: linux-scsi@vger.kernel.org Hello Matthias, Monday, May 10, 2004, 4:23:55 PM, you wrote: MA> support writes: >> the megaraid driver doesn't load when correctly when the local APIC = or >> SMP is enabled in the kernel. Is this problem know or is anyone >> working on this problem? MA> Not a problem for me. MA> Please add system configuration details, mainboard, BIOS manufactur= er MA> and version, exact megaraid hardware and so on. The System is a HP LH 3000 Server with integrated Netraid (onboard). lspci output and serial console output is appended 00:00.0 Host bridge: Intel Corp. 440BX/ZX - 82443BX/ZX Host bridge (AGP= disabled) (rev 03) 00:04.0 ISA bridge: Intel Corp. 82371AB PIIX4 ISA (rev 02) 00:04.1 IDE interface: Intel Corp. 82371AB PIIX4 IDE (rev 01) 00:04.2 USB Controller: Intel Corp. 82371AB PIIX4 USB (rev 01) 00:04.3 Bridge: Intel Corp. 82371AB PIIX4 ACPI (rev 02) 00:07.0 PCI bridge: Intel Corp. 80960RP [i960 RP Microprocessor/Bridge]= (rev 03) 00:07.1 SCSI storage controller: Intel Corp. 80960RP [i960RP Microproce= ssor] (rev 03) 00:08.0 PCI bridge: Digital Equipment Corporation DECchip 21152 (rev 03= ) 00:0b.0 System peripheral: Hewlett-Packard Company NetServer Smart IRQ = Router (rev a0) 00:0d.0 VGA compatible controller: Cirrus Logic GD 5446 (rev 45) 02:02.0 Ethernet controller: Intel Corp. 82557 [Ethernet Pro 100] (rev = 02) Kernel boot log: LILO 22.2 boot: Loading Linux266......................... Linux version 2.6.6 (root@serial) (gcc version 2.95.4 20011002 (Debian = prerelease)) #1 SMP Wed May 12 16:23:26 CEST 2004 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f800 (usable) BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 0000000010000000 (usable) BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) 256MB LOWMEM available. found SMP MP-table at 000f69b0 On node 0 totalpages: 65536 DMA zone: 4096 pages, LIFO batch:1 Normal zone: 61440 pages, LIFO batch:15 HighMem zone: 0 pages, LIFO batch:1 DMI not present. ACPI: Unable to locate RSDP Intel MultiProcessor Specification v1.4 Virtual Wire compatibility mode. OEM ID: HP Product ID: LH 3 APIC at: 0xFEE00000 Processor #1 6:7 APIC version 17 I/O APIC #0 Version 17 at 0xFEC00000. Enabling APIC mode: Flat. Using 1 I/O APICs Processors: 1 Built 1 zonelists Kernel command line: BOOT_IMAGE=3DLinux266 ro root=3D801 console=3DttyS= 0,9600n8 Initializing CPU#0 PID hash table entries: 2048 (order 11: 16384 bytes) Detected 499.282 MHz processor. Using tsc for high-res timesource Console: colour VGA+ 80x25 Memory: 256116k/262144k available (1776k kernel code, 5296k reserved, 8= 98k data, 156k init, 0k highmem) Checking if this processor honours the WP bit even in supervisor mode..= =2E Ok. Calibrating delay loop... 985.08 BogoMIPS Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) Mount-cache hash table entries: 512 (order: 0, 4096 bytes) CPU: L1 I cache: 16K, L1 D cache: 16K CPU: L2 cache: 512K CPU serial number disabled. Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX CPU0: Intel Pentium III (Katmai) stepping 03 per-CPU timeslice cutoff: 1461.94 usecs. task migration cache decay timeout: 2 msecs. enabled ExtINT on CPU#0 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 Total of 1 processors activated (985.08 BogoMIPS). ENABLING IO-APIC IRQs Setting 0 in the phys_id_present_map =2E..changing IO-APIC physical APIC ID to 0 ... ok. =2E.TIMER: vector=3D0x31 pin1=3D2 pin2=3D0 =2E.MP-BIOS bug: 8254 timer not connected to IO-APIC =2E..trying to set up timer (IRQ0) through the 8259A ... =2E.... (found pin 0) ...works. testing the IO APIC....................... =2E................................... done. Using local APIC timer interrupts. calibrating APIC timer ... =2E.... CPU clock speed is 499.0090 MHz. =2E.... host bus clock speed is 99.0818 MHz. Brought up 1 CPUs NET: Registered protocol family 16 PCI: PCI BIOS revision 2.10 entry at 0xfdaa7, last bus=3D2 PCI: Using configuration type 1 mtrr: v2.0 (20020519) ACPI: Subsystem revision 20040326 ACPI: Interpreter disabled. SCSI subsystem initialized PCI: Probing PCI hardware PCI: Probing PCI hardware (bus 00) PCI: Using IRQ router PIIX/ICH [8086/7110] at 0000:00:04.0 PCI->APIC IRQ transform: (B0,I7,P0) -> 25 PCI->APIC IRQ transform: (B2,I2,P0) -> 27 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) udf: registering filesystem Limiting direct PCI/PCI transfers. Real Time Clock Driver v1.12 Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabl= ed =FFttyS0 at I/O 0x3f8 (irq =3D 4) is a 16550A ttyS1 at I/O 0x2f8 (irq =3D 3) is a 16550A ttyS3 at I/O 0x2e8 (irq =3D 0) is a 16550A Using anticipatory io scheduler =46loppy drive(s): fd0 is 1.44M =46DC 0 is a National Semiconductor PC87306 RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize loop: loaded (max 8 devices) e100: Intel(R) PRO/100 Network Driver, 3.0.17 e100: Copyright(c) 1999-2004 Intel Corporation e100: eth0: e100_probe: addr 0xefffe000, irq 27, MAC addr 00:A0:C9:F4:9= B:A8 Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebu= s=3Dxx PIIX4: IDE controller at PCI slot 0000:00:04.1 PIIX4: chipset revision 1 PIIX4: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xfcd0-0xfcd7, BIOS settings: hda:pio, hdb:pio hda: CD-532E-B, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 hda: ATAPI 32X CD-ROM drive, 128kB Cache Uniform CD-ROM driver Revision: 3.20 ide-floppy driver 0.99.newide megaraid: found 0x8086:0x1960:bus 0:slot 7:func 1 scsi0:Found MegaRAID controller at 0xd081c000, IRQ:25 megaraid: Couldn't register IRQ 25! mice: PS/2 mouse device common for all mice serio: i8042 AUX port at 0x60,0x64 irq 12 input: ImExPS/2 Logitech Explorer Mouse on isa0060/serio1 serio: i8042 KBD port at 0x60,0x64 irq 1 atkbd.c: Failed to enable keyboard on isa0060/serio0 input: AT Translated Set 2 keyboard on isa0060/serio0 NET: Registered protocol family 2 IP: routing cache hash table of 2048 buckets, 16Kbytes TCP: Hash tables configured (established 16384 bind 16384) NET: Registered protocol family 1 NET: Registered protocol family 17 VFS: Cannot open root device "801" or unknown-block(8,1) Please append a correct "root=3D" boot option Kernel panic: VFS: Unable to mount root fs on unknown-block(8,1) -- Best regards, Thomas mailto:support@degrp.de - To unsubscribe from this list: send the line "unsubscribe linux-scsi" i= n the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html