megaraid problem

megaraid problem

[Fabien Penso]

Hi to everyone.

I have a megaraid raid card :

  Vendor: MegaRAID  Model: LD0 RAID5 52095R  Rev:   E 
  Type:   Direct-Access                      ANSI SCSI revision: 02

We used to run 2.4.23 very well for a long time, but we need to upgrade
because of all the security problems (never too late :) to 2.4.25. I've
tried for days with no luck; booting gives us :

megarid: Waiting for 3 commands to flush: iter:1000
megarid: Waiting for 3 commands to flush: iter:2000

and so on. I tried to copy the megaraid2.c/megaraid2.h from 2.4.23 (who
knows...) but it doesn't work better.

I am out of ideas here, so I just wonder if someone has a solution.

Thanks.

Re: megaraid problem

[Fabien Penso]

Sun, 28 Mar 2004 01:27:25 +0100, tu as dit : 

 > Hi to everyone.

[...]

 > Thanks.

Sorry I didn't see the message has been through the list before, I was
subscribed to the list.

As seen in the archive this message didn't get any reply. Any hint would
be really helpful, we are kind of lost on this one since days.

Thanks.

Re: megaraid problem

[Fabien Penso]

 > Sorry I didn't see the message has been through the list before, I was
 > subscribed to the list.

You noticed you had to read "I wasn't subscribed"... :) Must stop beer
on morning.

Megaraid problem.

[support]

Hi

the megaraid driver doesn't load when correctly when the local APIC or
SMP is enabled in the kernel. Is this problem know or is anyone
working on this problem?

-- 
Best regards,
 Thomas                          mailto:support@degrp.de

Re: Megaraid problem.

[Matthias Andree]

support <support@degrp.de> writes:

> the megaraid driver doesn't load when correctly when the local APIC or
> SMP is enabled in the kernel. Is this problem know or is anyone
> working on this problem?

Not a problem for me.

Please add system configuration details, mainboard, BIOS manufacturer
and version, exact megaraid hardware and so on.

-- 
Matthias Andree

Encrypted mail welcome: my GnuPG key ID is 0x052E7D95

megaraid problem

[Fabien Penso]

Hi to everyone.

I have a megaraid raid card :

  Vendor: MegaRAID  Model: LD0 RAID5 52095R  Rev:   E 
  Type:   Direct-Access                      ANSI SCSI revision: 02

We used to run 2.4.23 very well for a long time, but we need to upgrade
because of all the security problems (never too late :) to 2.4.25. I've
tried for days with no luck; booting gives us :

megarid: Waiting for 3 commands to flush: iter:1000
megarid: Waiting for 3 commands to flush: iter:2000

and so on. I tried to copy the megaraid2.c/megaraid2.h from 2.4.23 (who
knows...) but it doesn't work better.

I am out of ideas here, so I just wonder if someone has a solution.

Thanks.