Re: [PATCH v3 1/3] scsi: hisi_sas: Enable force phy when SATA disk directly connected

[yangxingui <yangxingui@huawei.com>]

Hi, John

On 2025/3/6 0:15, John Garry wrote:
> On 05/03/2025 08:16, yangxingui wrote:
>>>
>>> Sure, something like that - you just need to get libsas to trigger 
>>> the proper hw port id assignment for the device. As for specific 
>>> implementation in the LLDD, that up to you guys.
>>
>> Thank you for your suggestions. The disk was finally restored to 
>> normal, but the error handling took a long time. Since the error 
>> handling would set the host to the recovery state, other disks on the 
>> same host would be blocked for a long time.
> 
> But that because you have IO inflight for the disk which was unplugged?

No, these are all ATA_CMD_ID_ATA commands newly issued by 
ata_eh_revalidate_and_attach() during error handling, and will be 
retried three times. The reason is that after the hw port id is changed, 
we set it to invalid, and these ATA_CMD_ID_ATA cmds will fail to execute.

Thanks,
Xingui