From: Can Guo <cang@codeaurora.org>
To: Avri Altman <avri.altman@wdc.com>
Cc: "James E . J . Bottomley" <jejb@linux.vnet.ibm.com>,
"Martin K . Petersen" <martin.petersen@oracle.com>,
linux-scsi@vger.kernel.org, linux-kernel@vger.kernel.org,
gregkh@linuxfoundation.org, Bart Van Assche <bvanassche@acm.org>,
yongmyung lee <ymhungry.lee@samsung.com>,
Daejun Park <daejun7.park@samsung.com>,
alim.akhtar@samsung.com, asutoshd@codeaurora.org,
Zang Leigang <zangleigang@hisilicon.com>,
Avi Shchislowski <avi.shchislowski@wdc.com>,
Bean Huo <beanhuo@micron.com>,
stanley.chu@mediatek.com
Subject: Re: [PATCH v2 6/9] scsi: ufshpb: Add hpb dev reset response
Date: Mon, 08 Feb 2021 14:34:51 +0800 [thread overview]
Message-ID: <91845a884facd63d9e9d62e2e3424cfd@codeaurora.org> (raw)
In-Reply-To: <20210202083007.104050-7-avri.altman@wdc.com>
On 2021-02-02 16:30, Avri Altman wrote:
> The spec does not define what is the host's recommended response when
> the device send hpb dev reset response (oper 0x2).
>
> We will update all active hpb regions: mark them and do that on the
> next
> read.
>
> Signed-off-by: Avri Altman <avri.altman@wdc.com>
> ---
> drivers/scsi/ufs/ufshpb.c | 54 ++++++++++++++++++++++++++++++++++++---
> drivers/scsi/ufs/ufshpb.h | 1 +
> 2 files changed, 52 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/scsi/ufs/ufshpb.c b/drivers/scsi/ufs/ufshpb.c
> index 49c74de539b7..28e0025507a1 100644
> --- a/drivers/scsi/ufs/ufshpb.c
> +++ b/drivers/scsi/ufs/ufshpb.c
> @@ -17,6 +17,7 @@
> #include "../sd.h"
>
> #define WORK_PENDING 0
> +#define RESET_PENDING 1
> #define ACTIVATION_THRSHLD 4 /* 4 IOs */
> #define EVICTION_THRSHLD (ACTIVATION_THRSHLD << 6) /* 256 IOs */
>
> @@ -349,7 +350,8 @@ void ufshpb_prep(struct ufs_hba *hba, struct
> ufshcd_lrb *lrbp)
> if (rgn->reads == ACTIVATION_THRSHLD)
> activate = true;
> spin_unlock_irqrestore(&rgn->rgn_lock, flags);
> - if (activate) {
> + if (activate ||
> + test_and_clear_bit(RGN_FLAG_UPDATE, &rgn->rgn_flags)) {
> spin_lock_irqsave(&hpb->rsp_list_lock, flags);
> ufshpb_update_active_info(hpb, rgn_idx, srgn_idx);
> hpb->stats.rb_active_cnt++;
> @@ -1068,6 +1070,24 @@ void ufshpb_rsp_upiu(struct ufs_hba *hba,
> struct ufshcd_lrb *lrbp)
> case HPB_RSP_DEV_RESET:
> dev_warn(&hpb->sdev_ufs_lu->sdev_dev,
> "UFS device lost HPB information during PM.\n");
> +
> + if (hpb->is_hcm) {
> + struct ufshpb_lu *h;
> + struct scsi_device *sdev;
> +
> + shost_for_each_device(sdev, hba->host) {
I haven't test it yet, but this line shall cause recursive spin lock -
in current code base, ufshpb_rsp_upiu() is called with host_lock held.
Regards,
Can Guo.
> + h = sdev->hostdata;
> + if (!h)
> + continue;
> +
> + if (test_and_set_bit(RESET_PENDING,
> + &h->work_data_bits))
> + continue;
> +
> + schedule_work(&h->ufshpb_lun_reset_work);
> + }
> + }
> +
> break;
> default:
> dev_notice(&hpb->sdev_ufs_lu->sdev_dev,
> @@ -1200,6 +1220,27 @@ static void
> ufshpb_run_inactive_region_list(struct ufshpb_lu *hpb)
> spin_unlock_irqrestore(&hpb->rsp_list_lock, flags);
> }
>
> +static void ufshpb_reset_work_handler(struct work_struct *work)
> +{
> + struct ufshpb_lu *hpb;
> + struct victim_select_info *lru_info;
> + struct ufshpb_region *rgn;
> + unsigned long flags;
> +
> + hpb = container_of(work, struct ufshpb_lu, ufshpb_lun_reset_work);
> +
> + lru_info = &hpb->lru_info;
> +
> + spin_lock_irqsave(&hpb->rgn_state_lock, flags);
> +
> + list_for_each_entry(rgn, &lru_info->lh_lru_rgn, list_lru_rgn)
> + set_bit(RGN_FLAG_UPDATE, &rgn->rgn_flags);
> +
> + spin_unlock_irqrestore(&hpb->rgn_state_lock, flags);
> +
> + clear_bit(RESET_PENDING, &hpb->work_data_bits);
> +}
> +
> static void ufshpb_normalization_work_handler(struct work_struct
> *work)
> {
> struct ufshpb_lu *hpb;
> @@ -1392,6 +1433,8 @@ static int ufshpb_alloc_region_tbl(struct
> ufs_hba *hba, struct ufshpb_lu *hpb)
> } else {
> rgn->rgn_state = HPB_RGN_INACTIVE;
> }
> +
> + rgn->rgn_flags = 0;
> }
>
> return 0;
> @@ -1502,9 +1545,12 @@ static int ufshpb_lu_hpb_init(struct ufs_hba
> *hba, struct ufshpb_lu *hpb)
> INIT_LIST_HEAD(&hpb->list_hpb_lu);
>
> INIT_WORK(&hpb->map_work, ufshpb_map_work_handler);
> - if (hpb->is_hcm)
> + if (hpb->is_hcm) {
> INIT_WORK(&hpb->ufshpb_normalization_work,
> ufshpb_normalization_work_handler);
> + INIT_WORK(&hpb->ufshpb_lun_reset_work,
> + ufshpb_reset_work_handler);
> + }
>
> hpb->map_req_cache = kmem_cache_create("ufshpb_req_cache",
> sizeof(struct ufshpb_req), 0, 0, NULL);
> @@ -1591,8 +1637,10 @@ static void ufshpb_discard_rsp_lists(struct
> ufshpb_lu *hpb)
>
> static void ufshpb_cancel_jobs(struct ufshpb_lu *hpb)
> {
> - if (hpb->is_hcm)
> + if (hpb->is_hcm) {
> + cancel_work_sync(&hpb->ufshpb_lun_reset_work);
> cancel_work_sync(&hpb->ufshpb_normalization_work);
> + }
> cancel_work_sync(&hpb->map_work);
> }
>
> diff --git a/drivers/scsi/ufs/ufshpb.h b/drivers/scsi/ufs/ufshpb.h
> index 71b082ee7876..e55892ceb3fc 100644
> --- a/drivers/scsi/ufs/ufshpb.h
> +++ b/drivers/scsi/ufs/ufshpb.h
> @@ -184,6 +184,7 @@ struct ufshpb_lu {
> /* for selecting victim */
> struct victim_select_info lru_info;
> struct work_struct ufshpb_normalization_work;
> + struct work_struct ufshpb_lun_reset_work;
> unsigned long work_data_bits;
>
> /* pinned region information */
next prev parent reply other threads:[~2021-02-08 6:37 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-02-02 8:29 [PATCH v2 0/9] Add Host control mode to HPB Avri Altman
2021-02-02 8:29 ` [PATCH v2 1/9] scsi: ufshpb: Cache HPB Control mode on init Avri Altman
2021-02-02 8:30 ` [PATCH v2 2/9] scsi: ufshpb: Add host control mode support to rsp_upiu Avri Altman
2021-02-02 11:13 ` Greg KH
2021-02-02 11:24 ` Avri Altman
2021-02-02 11:51 ` Greg KH
2021-02-02 11:54 ` Avri Altman
2021-02-02 8:30 ` [PATCH v2 3/9] scsi: ufshpb: Add region's reads counter Avri Altman
2021-02-02 11:15 ` Greg KH
2021-02-02 11:23 ` Avri Altman
2021-02-02 11:51 ` Greg KH
2021-02-02 11:16 ` Greg KH
2021-02-02 11:22 ` Avri Altman
2021-02-02 8:30 ` [PATCH v2 4/9] scsi: ufshpb: Make eviction depends on region's reads Avri Altman
2021-02-02 8:30 ` [PATCH v2 5/9] scsi: ufshpb: Region inactivation in host mode Avri Altman
2021-02-02 8:30 ` [PATCH v2 6/9] scsi: ufshpb: Add hpb dev reset response Avri Altman
2021-02-08 6:34 ` Can Guo [this message]
2021-02-08 7:50 ` Avri Altman
2021-02-02 8:30 ` [PATCH v2 7/9] scsi: ufshpb: Add "Cold" regions timer Avri Altman
2021-02-02 8:30 ` [PATCH v2 8/9] scsi: ufshpb: Add support for host control mode Avri Altman
2021-02-02 8:30 ` [PATCH v2 9/9] scsi: ufshpb: Make host mode parameters configurable Avri Altman
2021-02-02 11:17 ` Greg KH
2021-02-02 11:21 ` Avri Altman
2021-02-04 0:48 ` Daejun Park
2021-02-02 11:18 ` Greg KH
2021-02-02 11:20 ` Avri Altman
2021-02-05 11:36 ` [PATCH v2 0/9] Add Host control mode to HPB Bean Huo
2021-02-05 11:43 ` Bean Huo
2021-02-07 14:07 ` Avri Altman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=91845a884facd63d9e9d62e2e3424cfd@codeaurora.org \
--to=cang@codeaurora.org \
--cc=alim.akhtar@samsung.com \
--cc=asutoshd@codeaurora.org \
--cc=avi.shchislowski@wdc.com \
--cc=avri.altman@wdc.com \
--cc=beanhuo@micron.com \
--cc=bvanassche@acm.org \
--cc=daejun7.park@samsung.com \
--cc=gregkh@linuxfoundation.org \
--cc=jejb@linux.vnet.ibm.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-scsi@vger.kernel.org \
--cc=martin.petersen@oracle.com \
--cc=stanley.chu@mediatek.com \
--cc=ymhungry.lee@samsung.com \
--cc=zangleigang@hisilicon.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox