Re: [PATCH v5 1/2] scsi: ufs: Enable power management for wlun

Adrian Hunter
2021-02-24T15:45:41Z

On 24/02/21 7:13 am, Asutosh Das wrote:
> During runtime-suspend of ufs host, the scsi devices are
> already suspended and so are the queues associated with them.
> But the ufs host sends SSU to wlun during its runtime-suspend.
> During the process blk_queue_enter checks if the queue is not in
> suspended state. If so, it waits for the queue to resume, and never
> comes out of it.
> The commit
> (d55d15a33: scsi: block: Do not accept any requests while suspended)
> adds the check if the queue is in suspended state in blk_queue_enter().
>
> Call trace:
> __switch_to+0x174/0x2c4
> __schedule+0x478/0x764
> schedule+0x9c/0xe0
> blk_queue_enter+0x158/0x228
> blk_mq_alloc_request+0x40/0xa4
> blk_get_request+0x2c/0x70
> __scsi_execute+0x60/0x1c4
> ufshcd_set_dev_pwr_mode+0x124/0x1e4
> ufshcd_suspend+0x208/0x83c
> ufshcd_runtime_suspend+0x40/0x154
> ufshcd_pltfrm_runtime_suspend+0x14/0x20
> pm_generic_runtime_suspend+0x28/0x3c
> __rpm_callback+0x80/0x2a4
> rpm_suspend+0x308/0x614
> rpm_idle+0x158/0x228
> pm_runtime_work+0x84/0xac
> process_one_work+0x1f0/0x470
> worker_thread+0x26c/0x4c8
> kthread+0x13c/0x320
> ret_from_fork+0x10/0x18
>
> Fix this by registering ufs device wlun as a scsi driver and
> registering it for block runtime-pm. Also make this as a
> supplier for all other luns. That way, this device wlun
> suspends after all the consumers and resumes after
> hba resumes.
>
> Co-developed-by: Can Guo <cang@codeaurora.org>
> Signed-off-by: Can Guo <cang@codeaurora.org>
> Signed-off-by: Asutosh Das <asutoshd@codeaurora.org>
> ---
> drivers/scsi/ufs/ufs-qcom.c | 2 +
> drivers/scsi/ufs/ufshcd-pci.c | 24 --
> drivers/scsi/ufs/ufshcd-pltfrm.c | 29 +++
> drivers/scsi/ufs/ufshcd-pltfrm.h | 4 +
> drivers/scsi/ufs/ufshcd.c | 491 +++++++++++++++++++++++++++++++--------
> drivers/scsi/ufs/ufshcd.h | 5 +
> include/trace/events/ufs.h | 20 ++
> 7 files changed, 454 insertions(+), 121 deletions(-)
>
> diff --git a/drivers/scsi/ufs/ufs-qcom.c b/drivers/scsi/ufs/ufs-qcom.c
> index f97d7b0..8cd8cfd 100644
> --- a/drivers/scsi/ufs/ufs-qcom.c
> +++ b/drivers/scsi/ufs/ufs-qcom.c
> @@ -1546,6 +1546,8 @@ static const struct dev_pm_ops ufs_qcom_pm_ops = {
> .runtime_suspend = ufshcd_pltfrm_runtime_suspend,
> .runtime_resume = ufshcd_pltfrm_runtime_resume,
> .runtime_idle = ufshcd_pltfrm_runtime_idle,
> + .prepare = ufshcd_pltfrm_prepare,
> + .resume_early = ufshcd_pltfrm_resume_early,

The pair for the "prepare" callback is the "complete" callback rather than
"resume_early"

Presumably all drivers will need this kind of change.

> };
>
> static struct platform_driver ufs_qcom_pltform = {
> diff --git a/drivers/scsi/ufs/ufshcd-pci.c b/drivers/scsi/ufs/ufshcd-pci.c
> index fadd566..ab84d56 100644
> --- a/drivers/scsi/ufs/ufshcd-pci.c
> +++ b/drivers/scsi/ufs/ufshcd-pci.c
> @@ -247,29 +247,6 @@ static int ufshcd_pci_resume(struct device *dev)
> return ufshcd_system_resume(dev_get_drvdata(dev));
> }
>
> -/**
> - * ufshcd_pci_poweroff - suspend-to-disk poweroff function
> - * @dev: pointer to PCI device handle
> - *
> - * Returns 0 if successful
> - * Returns non-zero otherwise
> - */
> -static int ufshcd_pci_poweroff(struct device *dev)
> -{
> - struct ufs_hba *hba = dev_get_drvdata(dev);
> - int spm_lvl = hba->spm_lvl;
> - int ret;
> -
> - /*
> - * For poweroff we need to set the UFS device to PowerDown mode.
> - * Force spm_lvl to ensure that.
> - */
> - hba->spm_lvl = 5;
> - ret = ufshcd_system_suspend(hba);
> - hba->spm_lvl = spm_lvl;
> - return ret;
> -}
> -
> #endif /* !CONFIG_PM_SLEEP */
>
> #ifdef CONFIG_PM
> @@ -370,7 +347,6 @@ static const struct dev_pm_ops ufshcd_pci_pm_ops = {
> .resume = ufshcd_pci_resume,
> .freeze = ufshcd_pci_suspend,
> .thaw = ufshcd_pci_resume,
> - .poweroff = ufshcd_pci_poweroff,
> .restore = ufshcd_pci_resume,
> #endif
> SET_RUNTIME_PM_OPS(ufshcd_pci_runtime_suspend,
> diff --git a/drivers/scsi/ufs/ufshcd-pltfrm.c b/drivers/scsi/ufs/ufshcd-pltfrm.c
> index 1a69949..84550dc 100644
> --- a/drivers/scsi/ufs/ufshcd-pltfrm.c
> +++ b/drivers/scsi/ufs/ufshcd-pltfrm.c
> @@ -217,6 +217,35 @@ int ufshcd_pltfrm_runtime_idle(struct device *dev)
> }
> EXPORT_SYMBOL_GPL(ufshcd_pltfrm_runtime_idle);
>
> +int ufshcd_pltfrm_prepare(struct device *dev)
> +{
> + struct ufs_hba *hba = dev_get_drvdata(dev);
> +
> + /*
> + * SCSI assumes that runtime-pm and system-pm for scsi drivers
> + * are same. And it doesn't wake up the device for system-suspend
> + * if it's runtime suspended. But ufs doesn't follow that.
> + * The rpm-lvl and spm-lvl can be different in ufs.
> + * Force it to honor system-suspend.

Presumably we could check whether the current power mode is different from
the spm_lvl target power mode, and only do this in that case?

> + */
> + scsi_autopm_get_device(hba->sdev_ufs_device);
> + /* Refer ufshcd_pltfrm_resume_early() */
> + pm_runtime_get_noresume(&hba->sdev_ufs_device->sdev_gendev);
> + scsi_autopm_put_device(hba->sdev_ufs_device);
> +
> + return 0;
> +}
> +EXPORT_SYMBOL_GPL(ufshcd_pltfrm_prepare);

The PCI driver will need this also, so we need a bus-agnostic version
exported from ufshcd.c that all drivers can use, like ufshcd_suspend() etc.

> +
> +int ufshcd_pltfrm_resume_early(struct device *dev)
> +{
> + struct ufs_hba *hba = dev_get_drvdata(dev);
> +
> + pm_runtime_put_noidle(&hba->sdev_ufs_device->sdev_gendev);
> +
> + return 0;
> +}
> +EXPORT_SYMBOL_GPL(ufshcd_pltfrm_resume_early);

Ditto

> #endif /* CONFIG_PM */
>
> void ufshcd_pltfrm_shutdown(struct platform_device *pdev)
> diff --git a/drivers/scsi/ufs/ufshcd-pltfrm.h b/drivers/scsi/ufs/ufshcd-pltfrm.h
> index 772a8e8..caf2709 100644
> --- a/drivers/scsi/ufs/ufshcd-pltfrm.h
> +++ b/drivers/scsi/ufs/ufshcd-pltfrm.h
> @@ -40,6 +40,8 @@ int ufshcd_pltfrm_resume(struct device *dev);
> int ufshcd_pltfrm_runtime_suspend(struct device *dev);
> int ufshcd_pltfrm_runtime_resume(struct device *dev);
> int ufshcd_pltfrm_runtime_idle(struct device *dev);
> +int ufshcd_pltfrm_prepare(struct device *dev);
> +int ufshcd_pltfrm_resume_early(struct device *dev);
>
> #else /* !CONFIG_PM */
>
> @@ -48,6 +50,8 @@ int ufshcd_pltfrm_runtime_idle(struct device *dev);
> #define ufshcd_pltfrm_runtime_suspend NULL
> #define ufshcd_pltfrm_runtime_resume NULL
> #define ufshcd_pltfrm_runtime_idle NULL
> +#define ufshcd_pltfrm_prepare NULL
> +#define ufshcd_pltfrm_resume_early NULL
>
> #endif /* CONFIG_PM */
>
> diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
> index 45624c7..bc96544 100644
> --- a/drivers/scsi/ufs/ufshcd.c
> +++ b/drivers/scsi/ufs/ufshcd.c
> @@ -16,6 +16,7 @@
> #include <linux/bitfield.h>
> #include <linux/blk-pm.h>
> #include <linux/blkdev.h>
> +#include <scsi/scsi_driver.h>
> #include "ufshcd.h"
> #include "ufs_quirks.h"
> #include "unipro.h"
> @@ -78,6 +79,8 @@
> /* Polling time to wait for fDeviceInit */
> #define FDEVICEINIT_COMPL_TIMEOUT 1500 /* millisecs */
>
> +#define wlun_dev_to_hba(dv) shost_priv(to_scsi_device(dv)->host)
> +
> #define ufshcd_toggle_vreg(_dev, _vreg, _on) \
> ({ \
> int _ret; \
> @@ -251,6 +254,12 @@ static int ufshcd_wb_toggle_flush_during_h8(struct ufs_hba *hba, bool set);
> static inline int ufshcd_wb_toggle_flush(struct ufs_hba *hba, bool enable);
> static void ufshcd_hba_vreg_set_lpm(struct ufs_hba *hba);
> static void ufshcd_hba_vreg_set_hpm(struct ufs_hba *hba);
> +static int ufshcd_wl_runtime_suspend(struct device *dev);
> +static int ufshcd_wl_runtime_resume(struct device *dev);
> +static int ufshcd_wl_suspend(struct device *dev);
> +static int ufshcd_wl_resume(struct device *dev);
> +static void ufshcd_wl_shutdown(struct device *dev);
> +static int ufshcd_clear_ua_wlun(struct ufs_hba *hba, u8 wlun);
>
> static inline bool ufshcd_valid_tag(struct ufs_hba *hba, int tag)
> {
> @@ -1556,7 +1565,7 @@ static ssize_t ufshcd_clkscale_enable_store(struct device *dev,
> if (value == hba->clk_scaling.is_enabled)
> goto out;
>
> - pm_runtime_get_sync(hba->dev);
> + scsi_autopm_get_device(hba->sdev_ufs_device);
> ufshcd_hold(hba, false);
>
> hba->clk_scaling.is_enabled = value;
> @@ -1572,7 +1581,7 @@ static ssize_t ufshcd_clkscale_enable_store(struct device *dev,
> }
>
> ufshcd_release(hba);
> - pm_runtime_put_sync(hba->dev);
> + scsi_autopm_put_device(hba->sdev_ufs_device);
> out:
> up(&hba->host_sem);
> return err ? err : count;
> @@ -2572,6 +2581,17 @@ static inline u16 ufshcd_upiu_wlun_to_scsi_wlun(u8 upiu_wlun_id)
> return (upiu_wlun_id & ~UFS_UPIU_WLUN_ID) | SCSI_W_LUN_BASE;
> }
>
> +static inline bool is_rpmb_wlun(struct scsi_device *sdev)
> +{
> + return (sdev->lun == ufshcd_upiu_wlun_to_scsi_wlun(UFS_UPIU_RPMB_WLUN));
> +}
> +
> +static inline bool is_device_wlun(struct scsi_device *sdev)
> +{
> + return (sdev->lun ==
> + ufshcd_upiu_wlun_to_scsi_wlun(UFS_UPIU_UFS_DEVICE_WLUN));
> +}
> +
> static void ufshcd_init_lrb(struct ufs_hba *hba, struct ufshcd_lrb *lrb, int i)
> {
> struct utp_transfer_cmd_desc *cmd_descp = hba->ucdl_base_addr;
> @@ -4808,6 +4828,41 @@ static inline void ufshcd_get_lu_power_on_wp_status(struct ufs_hba *hba,
> }
>
> /**
> + * ufshcd_setup_links - associate link b/w device wlun and other luns
> + * @sdev: pointer to SCSI device
> + * @hba: pointer to ufs hba
> + */
> +static void ufshcd_setup_links(struct ufs_hba *hba, struct scsi_device *sdev)
> +{
> + struct device_link *link;
> +
> + /*
> + * device wlun is the supplier & rest of the luns are consumers
> + * This ensures that device wlun suspends after all other luns.
> + */
> + if (hba->sdev_ufs_device) {
> + link = device_link_add(&sdev->sdev_gendev,
> + &hba->sdev_ufs_device->sdev_gendev,
> + DL_FLAG_PM_RUNTIME);
> + if (!link) {
> + dev_err(&sdev->sdev_gendev, "Failed establishing link - %s\n",
> + dev_name(&hba->sdev_ufs_device->sdev_gendev));
> + return;
> + }
> + hba->luns_avail--;
> + /* Ignore REPORT_LUN wlun probing */
> + if (hba->luns_avail != 1)
> + return;
> +
> + pm_runtime_put_noidle(&hba->sdev_ufs_device->sdev_gendev);
> + pm_runtime_mark_last_busy(&hba->sdev_ufs_device->sdev_gendev);
> + } else {
> + /* device wlun is probed */
> + hba->luns_avail--;
> + }
> +}
> +
> +/**
> * ufshcd_slave_alloc - handle initial SCSI device configurations
> * @sdev: pointer to SCSI device
> *
> @@ -4838,6 +4893,8 @@ static int ufshcd_slave_alloc(struct scsi_device *sdev)
>
> ufshcd_get_lu_power_on_wp_status(hba, sdev);
>
> + ufshcd_setup_links(hba, sdev);
> +
> return 0;
> }
>
> @@ -4984,16 +5041,9 @@ ufshcd_transfer_rsp_status(struct ufs_hba *hba, struct ufshcd_lrb *lrbp)
> * solution could be to abort the system suspend if
> * UFS device needs urgent BKOPs.
> */
> - if (!hba->pm_op_in_progress &&
> - ufshcd_is_exception_event(lrbp->ucd_rsp_ptr) &&
> - schedule_work(&hba->eeh_work)) {
> - /*
> - * Prevent suspend once eeh_work is scheduled
> - * to avoid deadlock between ufshcd_suspend
> - * and exception event handler.
> - */
> - pm_runtime_get_noresume(hba->dev);
> - }
> + if (ufshcd_is_exception_event(lrbp->ucd_rsp_ptr))
> + /* Flushed in suspend */
> + schedule_work(&hba->eeh_work);
> break;
> case UPIU_TRANSACTION_REJECT_UPIU:
> /* TODO: handle Reject UPIU Response */
> @@ -5589,8 +5639,8 @@ static void ufshcd_rpm_dev_flush_recheck_work(struct work_struct *work)
> * after a certain delay to recheck the threshold by next runtime
> * suspend.
> */
> - pm_runtime_get_sync(hba->dev);
> - pm_runtime_put_sync(hba->dev);
> + scsi_autopm_get_device(hba->sdev_ufs_device);
> + scsi_autopm_put_device(hba->sdev_ufs_device);
> }
>
> /**
> @@ -5607,7 +5657,6 @@ static void ufshcd_exception_event_handler(struct work_struct *work)
> u32 status = 0;
> hba = container_of(work, struct ufs_hba, eeh_work);
>
> - pm_runtime_get_sync(hba->dev);
> ufshcd_scsi_block_requests(hba);
> err = ufshcd_get_ee_status(hba, &status);
> if (err) {
> @@ -5623,14 +5672,6 @@ static void ufshcd_exception_event_handler(struct work_struct *work)
>
> out:
> ufshcd_scsi_unblock_requests(hba);
> - /*
> - * pm_runtime_get_noresume is called while scheduling
> - * eeh_work to avoid suspend racing with exception work.
> - * Hence decrement usage counter using pm_runtime_put_noidle
> - * to allow suspend on completion of exception event handler.
> - */
> - pm_runtime_put_noidle(hba->dev);
> - pm_runtime_put(hba->dev);
> return;
> }
>
> @@ -7254,6 +7295,15 @@ static int ufshcd_scsi_add_wlus(struct ufs_hba *hba)
> goto out;
> }
> ufshcd_blk_pm_runtime_init(hba->sdev_ufs_device);
> + /*
> + * A pm_runtime_put_sync is invoked when this device enables blk_pm_runtime
> + * & would suspend the device-wlun upon timer expiry.
> + * But suspending device wlun _may_ put the ufs device in the pre-defined
> + * low power mode (SSU <rpm_lvl>). Probing of other luns may fail then.
> + * Don't allow this suspend until all the luns have been probed.
> + * See pm_runtime_mark_last_busy in ufshcd_setup_links.
> + */
> + pm_runtime_get_noresume(&hba->sdev_ufs_device->sdev_gendev);
> scsi_device_put(hba->sdev_ufs_device);
>
> hba->sdev_rpmb = __scsi_add_device(hba->host, 0, 0,
> @@ -7417,6 +7467,9 @@ static int ufs_get_device_desc(struct ufs_hba *hba)
> goto out;
> }
>
> + hba->luns_avail = desc_buf[DEVICE_DESC_PARAM_NUM_LU] +
> + desc_buf[DEVICE_DESC_PARAM_NUM_WLU];
> +
> ufs_fixup_device_setup(hba);
>
> ufshcd_wb_probe(hba, desc_buf);
> @@ -7747,6 +7800,95 @@ static int ufshcd_device_params_init(struct ufs_hba *hba)
> return ret;
> }
>
> +static int ufshcd_wl_probe(struct device *dev)
> +{
> + return is_device_wlun(to_scsi_device(dev)) ? 0 : -ENODEV;
> +}
> +
> +static int ufshcd_wl_remove(struct device *dev)
> +{
> + return 0;
> +}
> +
> +static const struct dev_pm_ops ufshcd_wl_pm_ops = {
> + SET_RUNTIME_PM_OPS(ufshcd_wl_runtime_suspend, ufshcd_wl_runtime_resume, NULL)
> + SET_SYSTEM_SLEEP_PM_OPS(ufshcd_wl_suspend, ufshcd_wl_resume)

Here SET_SYSTEM_SLEEP_PM_OPS sets .poweroff to ufshcd_wl_suspend() which is
only correct if spm_lvl is 5. We need it to do what ufshcd_wl_shutdown()
does, although the PM functions return 'int' whereas ->shutdown() returns
'void', so it cannot use the same prototype i.e.

static int ufshcd_wl_poweroff(struct device *dev)
{
ufshcd_wl_shutdown(dev);
return 0;
}

Then,
.suspend = ufshcd_wl_suspend,
.resume = ufshcd_wl_resume,
.freeze = ufshcd_wl_suspend,
.thaw = ufshcd_wl_resume,
.poweroff = ufshcd_wl_poweroff,
.restore = ufshcd_wl_resume,

> +};
> +
> +/**
> + * ufs_dev_wlun_template - describes ufs device wlun
> + * ufs-device wlun - used to send pm commands
> + * All luns are consumers of ufs-device wlun.
> + *
> + * Currently, no sd driver is present for wluns.
> + * Hence the no specific pm operations are performed.
> + * With ufs design, SSU should be sent to ufs-device wlun.
> + * Hence register a scsi driver for ufs wluns only.
> + */
> +static struct scsi_driver ufs_dev_wlun_template = {
> + .gendrv = {
> + .name = "ufs_device_wlun",
> + .owner = THIS_MODULE,
> + .probe = ufshcd_wl_probe,
> + .remove = ufshcd_wl_remove,
> + .pm = &ufshcd_wl_pm_ops,
> + .shutdown = ufshcd_wl_shutdown,
> + },
> +};
> +
> +static int ufshcd_rpmb_probe(struct device *dev)
> +{
> + return is_rpmb_wlun(to_scsi_device(dev)) ? 0 : -ENODEV;
> +}
> +
> +static inline int ufshcd_clear_rpmb_uac(struct ufs_hba *hba)
> +{
> + int ret = 0;
> +
> + if (!hba->wlun_rpmb_clr_ua)
> + return 0;
> + ret = ufshcd_clear_ua_wlun(hba, UFS_UPIU_RPMB_WLUN);
> + if (!ret)
> + hba->wlun_rpmb_clr_ua = 0;
> + return ret;
> +}
> +
> +static int ufshcd_rpmb_runtime_resume(struct device *dev)
> +{
> + struct ufs_hba *hba = wlun_dev_to_hba(dev);
> +
> + if (hba->sdev_rpmb)
> + return ufshcd_clear_rpmb_uac(hba);
> + return 0;
> +}
> +
> +static int ufshcd_rpmb_resume(struct device *dev)
> +{
> + struct ufs_hba *hba = wlun_dev_to_hba(dev);
> +
> + if (hba->sdev_rpmb && !pm_runtime_suspended(dev))
> + return ufshcd_clear_rpmb_uac(hba);
> + return 0;
> +}
> +
> +static const struct dev_pm_ops ufs_rpmb_pm_ops = {
> + SET_RUNTIME_PM_OPS(NULL, ufshcd_rpmb_runtime_resume, NULL)
> + SET_SYSTEM_SLEEP_PM_OPS(NULL, ufshcd_rpmb_resume)
> +};
> +
> +/**
> + * Describes the ufs rpmb wlun.
> + * Used only to send uac.
> + */
> +static struct scsi_driver ufs_rpmb_wlun_template = {
> + .gendrv = {
> + .name = "ufs_rpmb_wlun",
> + .owner = THIS_MODULE,
> + .probe = ufshcd_rpmb_probe,
> + .pm = &ufs_rpmb_pm_ops,
> + },
> +};
> +
> /**
> * ufshcd_add_lus - probe and add UFS logical units
> * @hba: per-adapter instance
> @@ -7755,6 +7897,19 @@ static int ufshcd_add_lus(struct ufs_hba *hba)
> {
> int ret;
>
> + ret = scsi_register_driver(&ufs_dev_wlun_template.gendrv);
> + if (ret) {
> + dev_err(hba->dev, "Register device wlun driver failed: %d\n",
> + ret);
> + return ret;
> + }

This is assuming there is only one UFS host controller, which is probably
true but not something that we should assume. Moving this to
ufshcd_core_init() might also avoid some more of the forward declarations.

> +
> + ret = scsi_register_driver(&ufs_rpmb_wlun_template.gendrv);
> + if (ret) {
> + dev_err(hba->dev, "Register device wlun driver failed: %d\n",
> + ret);
> + return ret;
> + }
> /* Add required well known logical units to scsi mid layer */
> ret = ufshcd_scsi_add_wlus(hba);
> if (ret)
> @@ -7892,6 +8047,7 @@ static int ufshcd_probe_hba(struct ufs_hba *hba, bool async)
> ufshcd_set_ufs_dev_active(hba);
> ufshcd_force_reset_auto_bkops(hba);
> hba->wlun_dev_clr_ua = true;
> + hba->wlun_rpmb_clr_ua = true;
>
> /* Gear up to HS gear if supported */
> if (hba->max_pwr_info.is_valid) {
> @@ -7964,6 +8120,7 @@ static void ufshcd_async_scan(void *data, async_cookie_t cookie)
> pm_runtime_put_sync(hba->dev);
> ufshcd_hba_exit(hba);
> }
> + hba->init_done = true;
> }
>
> static const struct attribute_group *ufshcd_driver_groups[] = {
> @@ -8475,7 +8632,8 @@ static int ufshcd_set_dev_pwr_mode(struct ufs_hba *hba,
> * handling context.
> */
> hba->host->eh_noresume = 1;
> - ufshcd_clear_ua_wluns(hba);
> + if (hba->wlun_dev_clr_ua)
> + ufshcd_clear_ua_wlun(hba, UFS_UPIU_UFS_DEVICE_WLUN);
>
> cmd[4] = pwr_mode << 4;
>
> @@ -8650,31 +8808,19 @@ static void ufshcd_hba_vreg_set_hpm(struct ufs_hba *hba)
> ufshcd_setup_hba_vreg(hba, true);
> }
>
> -/**
> - * ufshcd_suspend - helper function for suspend operations
> - * @hba: per adapter instance
> - * @pm_op: desired low power operation type
> - *
> - * This function will try to put the UFS device and link into low power
> - * mode based on the "rpm_lvl" (Runtime PM level) or "spm_lvl"
> - * (System PM level).
> - *
> - * If this function is called during shutdown, it will make sure that
> - * both UFS device and UFS link is powered off.
> - *
> - * NOTE: UFS device & link must be active before we enter in this function.
> - *
> - * Returns 0 for success and non-zero for failure
> - */
> -static int ufshcd_suspend(struct ufs_hba *hba, enum ufs_pm_op pm_op)
> +static int __ufshcd_wl_suspend(struct ufs_hba *hba, enum ufs_pm_op pm_op)
> {
> int ret = 0;
> - int check_for_bkops;
> enum ufs_pm_level pm_lvl;
> enum ufs_dev_pwr_mode req_dev_pwr_mode;
> enum uic_link_state req_link_state;
>
> - hba->pm_op_in_progress = 1;
> + /*
> + * Is invoked when the device wlun is added to sysfs
> + * But by then hba->sdev_ufs_device may not be initialized.
> + */
> + if (!hba->init_done)
> + return 0;
> if (!ufshcd_is_shutdown_pm(pm_op)) {
> pm_lvl = ufshcd_is_runtime_pm(pm_op) ?
> hba->rpm_lvl : hba->spm_lvl;
> @@ -8690,24 +8836,23 @@ static int ufshcd_suspend(struct ufs_hba *hba, enum ufs_pm_op pm_op)
> * just gate the clocks.
> */
> ufshcd_hold(hba, false);
> - hba->clk_gating.is_suspended = true;
>
> if (ufshcd_is_clkscaling_supported(hba))
> ufshcd_clk_scaling_suspend(hba, true);
>
> if (req_dev_pwr_mode == UFS_ACTIVE_PWR_MODE &&
> req_link_state == UIC_LINK_ACTIVE_STATE) {
> - goto disable_clks;
> + goto enable_scaling;
> }
>
> if ((req_dev_pwr_mode == hba->curr_dev_pwr_mode) &&
> (req_link_state == hba->uic_link_state))
> - goto enable_gating;
> + goto enable_scaling;
>
> /* UFS device & link must be active before we enter in this function */
> if (!ufshcd_is_ufs_dev_active(hba) || !ufshcd_is_link_active(hba)) {
> ret = -EINVAL;
> - goto enable_gating;
> + goto enable_scaling;
> }
>
> if (ufshcd_is_runtime_pm(pm_op)) {
> @@ -8719,7 +8864,7 @@ static int ufshcd_suspend(struct ufs_hba *hba, enum ufs_pm_op pm_op)
> */
> ret = ufshcd_urgent_bkops(hba);
> if (ret)
> - goto enable_gating;
> + goto enable_scaling;
> } else {
> /* make sure that auto bkops is disabled */
> ufshcd_disable_auto_bkops(hba);
> @@ -8746,10 +8891,206 @@ static int ufshcd_suspend(struct ufs_hba *hba, enum ufs_pm_op pm_op)
>
> if (!hba->dev_info.b_rpm_dev_flush_capable) {
> ret = ufshcd_set_dev_pwr_mode(hba, req_dev_pwr_mode);
> - if (ret)
> - goto enable_gating;
> + if (!ret)
> + goto out;
> }
> }
> +enable_scaling:
> + if (ufshcd_is_clkscaling_supported(hba))
> + ufshcd_clk_scaling_suspend(hba, false);
> +
> + hba->dev_info.b_rpm_dev_flush_capable = false;
> +out:
> + if (hba->dev_info.b_rpm_dev_flush_capable) {
> + schedule_delayed_work(&hba->rpm_dev_flush_recheck_work,
> + msecs_to_jiffies(RPM_DEV_FLUSH_RECHECK_WORK_DELAY_MS));
> + }
> + if (ret)
> + ufshcd_update_evt_hist(hba, UFS_EVT_WL_SUSP_ERR, (u32)ret);
> + ufshcd_release(hba);
> + return ret;
> +}
> +
> +static int __ufshcd_wl_resume(struct ufs_hba *hba, enum ufs_pm_op pm_op)
> +{
> + int ret = 0;
> +
> + if (!hba->init_done)
> + return 0;
> +
> + ufshcd_hold(hba, false);
> + if (ufshcd_is_ufs_dev_deepsleep(hba)) {
> + /* The device is in DeepSleep but hba was not suspended */
> + ret = ufshcd_reset_and_restore(hba);
> + if (ret)
> + goto out;
> + }
> +
> + if (!ufshcd_is_ufs_dev_active(hba)) {
> + ret = ufshcd_set_dev_pwr_mode(hba, UFS_ACTIVE_PWR_MODE);
> + if (ret)
> + goto out;
> + }
> +
> + if (ufshcd_keep_autobkops_enabled_except_suspend(hba))
> + ufshcd_enable_auto_bkops(hba);
> + else
> + /*
> + * If BKOPs operations are urgently needed at this moment then
> + * keep auto-bkops enabled or else disable it.
> + */
> + ufshcd_urgent_bkops(hba);
> +
> + if (hba->clk_scaling.is_allowed)
> + ufshcd_resume_clkscaling(hba);
> +
> + if (hba->dev_info.b_rpm_dev_flush_capable) {
> + hba->dev_info.b_rpm_dev_flush_capable = false;
> + cancel_delayed_work(&hba->rpm_dev_flush_recheck_work);
> + }
> +
> +out:
> + if (ret)
> + ufshcd_update_evt_hist(hba, UFS_EVT_WL_RES_ERR, (u32)ret);
> + ufshcd_release(hba);
> + return ret;
> +}
> +
> +static int ufshcd_wl_runtime_suspend(struct device *dev)
> +{
> + struct scsi_device *sdev = to_scsi_device(dev);
> + struct ufs_hba *hba;
> + int ret;
> + ktime_t start = ktime_get();
> +
> + hba = shost_priv(sdev->host);
> +
> + ret = __ufshcd_wl_suspend(hba, UFS_RUNTIME_PM);
> + if (ret)
> + dev_err(&sdev->sdev_gendev, "%s failed: %d\n", __func__, ret);
> +
> + trace_ufshcd_wl_runtime_suspend(dev_name(dev), ret,
> + ktime_to_us(ktime_sub(ktime_get(), start)),
> + hba->curr_dev_pwr_mode, hba->uic_link_state);
> +
> + return ret;
> +}
> +
> +static int ufshcd_wl_runtime_resume(struct device *dev)
> +{
> + struct scsi_device *sdev = to_scsi_device(dev);
> + struct ufs_hba *hba;
> + int ret = 0;
> + ktime_t start = ktime_get();
> +
> + hba = shost_priv(sdev->host);
> +
> + ret = __ufshcd_wl_resume(hba, UFS_RUNTIME_PM);
> + if (ret)
> + dev_err(&sdev->sdev_gendev, "%s failed: %d\n", __func__, ret);
> +
> + trace_ufshcd_wl_runtime_resume(dev_name(dev), ret,
> + ktime_to_us(ktime_sub(ktime_get(), start)),
> + hba->curr_dev_pwr_mode, hba->uic_link_state);
> +
> + return ret;
> +}
> +
> +static int ufshcd_wl_suspend(struct device *dev)
> +{
> + struct scsi_device *sdev = to_scsi_device(dev);
> + struct ufs_hba *hba;
> + int ret;
> + ktime_t start = ktime_get();
> +
> + hba = shost_priv(sdev->host);
> + ret = __ufshcd_wl_suspend(hba, UFS_SYSTEM_PM);
> + if (ret)
> + dev_err(&sdev->sdev_gendev, "%s failed: %d\n", __func__, ret);
> +
> + trace_ufshcd_wl_suspend(dev_name(dev), ret,
> + ktime_to_us(ktime_sub(ktime_get(), start)),
> + hba->curr_dev_pwr_mode, hba->uic_link_state);
> +
> + return ret;
> +}
> +
> +static int ufshcd_wl_resume(struct device *dev)
> +{
> + struct scsi_device *sdev = to_scsi_device(dev);
> + struct ufs_hba *hba;
> + int ret = 0;
> + ktime_t start = ktime_get();
> +
> + if (pm_runtime_suspended(dev))
> + return 0;
> + hba = shost_priv(sdev->host);
> +
> + ret = __ufshcd_wl_resume(hba, UFS_SYSTEM_PM);
> + if (ret)
> + dev_err(&sdev->sdev_gendev, "%s failed: %d\n", __func__, ret);
> +
> + trace_ufshcd_wl_resume(dev_name(dev), ret,
> + ktime_to_us(ktime_sub(ktime_get(), start)),
> + hba->curr_dev_pwr_mode, hba->uic_link_state);
> +
> + return ret;
> +}
> +
> +static void ufshcd_wl_shutdown(struct device *dev)
> +{
> + struct scsi_device *sdev = to_scsi_device(dev);
> + struct ufs_hba *hba;
> +
> + hba = shost_priv(sdev->host);
> + scsi_device_quiesce(sdev);
> + shost_for_each_device(sdev, hba->host) {
> + if (sdev == hba->sdev_ufs_device)
> + continue;
> + scsi_device_quiesce(sdev);
> + }
> + __ufshcd_wl_suspend(hba, UFS_SHUTDOWN_PM);
> +}
> +
> +/**
> + * ufshcd_suspend - helper function for suspend operations
> + * @hba: per adapter instance
> + * @pm_op: desired low power operation type
> + *
> + * This function will try to put the UFS link into low power
> + * mode based on the "rpm_lvl" (Runtime PM level) or "spm_lvl"
> + * (System PM level).
> + *
> + * If this function is called during shutdown, it will make sure that
> + * link is powered off.
> + *
> + * Returns 0 for success and non-zero for failure
> + */
> +static int ufshcd_suspend(struct ufs_hba *hba, enum ufs_pm_op pm_op)
> +{
> + int ret = 0;
> + int check_for_bkops;
> + enum ufs_pm_level pm_lvl;
> + enum ufs_dev_pwr_mode req_dev_pwr_mode;
> + enum uic_link_state req_link_state;
> +
> + hba->pm_op_in_progress = 1;
> + if (!ufshcd_is_shutdown_pm(pm_op)) {
> + pm_lvl = ufshcd_is_runtime_pm(pm_op) ?
> + hba->rpm_lvl : hba->spm_lvl;
> + req_dev_pwr_mode = ufs_get_pm_lvl_to_dev_pwr_mode(pm_lvl);
> + req_link_state = ufs_get_pm_lvl_to_link_pwr_state(pm_lvl);
> + } else {
> + req_dev_pwr_mode = UFS_POWERDOWN_PWR_MODE;
> + req_link_state = UIC_LINK_OFF_STATE;
> + }
> +
> + /*
> + * If we can't transition into any of the low power modes
> + * just gate the clocks.
> + */
> + ufshcd_hold(hba, false);
> + hba->clk_gating.is_suspended = true;
>
> /*
> * In the case of DeepSleep, the device is expected to remain powered
> @@ -8758,9 +9099,8 @@ static int ufshcd_suspend(struct ufs_hba *hba, enum ufs_pm_op pm_op)
> check_for_bkops = !ufshcd_is_ufs_dev_deepsleep(hba);
> ret = ufshcd_link_state_transition(hba, req_link_state, check_for_bkops);
> if (ret)
> - goto set_dev_active;
> + goto enable_gating;
>
> -disable_clks:
> /*
> * Call vendor specific suspend callback. As these callbacks may access
> * vendor specific host controller register space call them before the
> @@ -8790,7 +9130,6 @@ static int ufshcd_suspend(struct ufs_hba *hba, enum ufs_pm_op pm_op)
> goto out;
>
> set_link_active:
> - ufshcd_vreg_set_hpm(hba);
> /*
> * Device hardware reset is required to exit DeepSleep. Also, for
> * DeepSleep, the link is off so host reset and restore will be done
> @@ -8804,28 +9143,15 @@ static int ufshcd_suspend(struct ufs_hba *hba, enum ufs_pm_op pm_op)
> ufshcd_set_link_active(hba);
> else if (ufshcd_is_link_off(hba))
> ufshcd_host_reset_and_restore(hba);
> -set_dev_active:
> /* Can also get here needing to exit DeepSleep */
> if (ufshcd_is_ufs_dev_deepsleep(hba)) {
> ufshcd_device_reset(hba);
> ufshcd_host_reset_and_restore(hba);
> }
> - if (!ufshcd_set_dev_pwr_mode(hba, UFS_ACTIVE_PWR_MODE))
> - ufshcd_disable_auto_bkops(hba);
> enable_gating:
> - if (ufshcd_is_clkscaling_supported(hba))
> - ufshcd_clk_scaling_suspend(hba, false);
> -
> hba->clk_gating.is_suspended = false;
> - hba->dev_info.b_rpm_dev_flush_capable = false;
> - ufshcd_clear_ua_wluns(hba);
> ufshcd_release(hba);
> out:
> - if (hba->dev_info.b_rpm_dev_flush_capable) {
> - schedule_delayed_work(&hba->rpm_dev_flush_recheck_work,
> - msecs_to_jiffies(RPM_DEV_FLUSH_RECHECK_WORK_DELAY_MS));
> - }
> -
> hba->pm_op_in_progress = 0;
>
> if (ret)
> @@ -8846,10 +9172,8 @@ static int ufshcd_suspend(struct ufs_hba *hba, enum ufs_pm_op pm_op)
> static int ufshcd_resume(struct ufs_hba *hba, enum ufs_pm_op pm_op)
> {
> int ret;
> - enum uic_link_state old_link_state;
>
> hba->pm_op_in_progress = 1;
> - old_link_state = hba->uic_link_state;
>
> ufshcd_hba_vreg_set_hpm(hba);
> ret = ufshcd_vreg_set_hpm(hba);
> @@ -8901,43 +9225,14 @@ static int ufshcd_resume(struct ufs_hba *hba, enum ufs_pm_op pm_op)
> goto vendor_suspend;
> }
>
> - if (!ufshcd_is_ufs_dev_active(hba)) {
> - ret = ufshcd_set_dev_pwr_mode(hba, UFS_ACTIVE_PWR_MODE);
> - if (ret)
> - goto set_old_link_state;
> - }
> -
> - if (ufshcd_keep_autobkops_enabled_except_suspend(hba))
> - ufshcd_enable_auto_bkops(hba);
> - else
> - /*
> - * If BKOPs operations are urgently needed at this moment then
> - * keep auto-bkops enabled or else disable it.
> - */
> - ufshcd_urgent_bkops(hba);
> -
> - hba->clk_gating.is_suspended = false;
> -
> - if (ufshcd_is_clkscaling_supported(hba))
> - ufshcd_clk_scaling_suspend(hba, false);
> -
> /* Enable Auto-Hibernate if configured */
> ufshcd_auto_hibern8_enable(hba);
>
> - if (hba->dev_info.b_rpm_dev_flush_capable) {
> - hba->dev_info.b_rpm_dev_flush_capable = false;
> - cancel_delayed_work(&hba->rpm_dev_flush_recheck_work);
> - }
> -
> - ufshcd_clear_ua_wluns(hba);
> -
> /* Schedule clock gating in case of no access to UFS device yet */
> ufshcd_release(hba);
>
> goto out;
>
> -set_old_link_state:
> - ufshcd_link_state_transition(hba, old_link_state, 0);
> vendor_suspend:
> ufshcd_vops_suspend(hba, pm_op);
> disable_irq_and_vops_clks:
> @@ -9170,6 +9465,8 @@ EXPORT_SYMBOL(ufshcd_shutdown);
> void ufshcd_remove(struct ufs_hba *hba)
> {
> ufs_bsg_remove(hba);
> + scsi_unregister_driver(&ufs_dev_wlun_template.gendrv);
> + scsi_unregister_driver(&ufs_rpmb_wlun_template.gendrv);
> ufs_sysfs_remove_nodes(hba->dev);
> blk_cleanup_queue(hba->tmf_queue);
> blk_mq_free_tag_set(&hba->tmf_tag_set);
> diff --git a/drivers/scsi/ufs/ufshcd.h b/drivers/scsi/ufs/ufshcd.h
> index ee61f82..9087593 100644
> --- a/drivers/scsi/ufs/ufshcd.h
> +++ b/drivers/scsi/ufs/ufshcd.h
> @@ -72,6 +72,8 @@ enum ufs_event_type {
> UFS_EVT_LINK_STARTUP_FAIL,
> UFS_EVT_RESUME_ERR,
> UFS_EVT_SUSPEND_ERR,
> + UFS_EVT_WL_SUSP_ERR,
> + UFS_EVT_WL_RES_ERR,
>
> /* abnormal events */
> UFS_EVT_DEV_RESET,
> @@ -804,6 +806,7 @@ struct ufs_hba {
> struct list_head clk_list_head;
>
> bool wlun_dev_clr_ua;
> + bool wlun_rpmb_clr_ua;
>
> /* Number of requests aborts */
> int req_abort_count;
> @@ -841,6 +844,8 @@ struct ufs_hba {
> #ifdef CONFIG_DEBUG_FS
> struct dentry *debugfs_root;
> #endif
> + bool init_done;
> + u32 luns_avail;
> };
>
> /* Returns true if clocks can be gated. Otherwise false */
> diff --git a/include/trace/events/ufs.h b/include/trace/events/ufs.h
> index e151477..d9d233b 100644
> --- a/include/trace/events/ufs.h
> +++ b/include/trace/events/ufs.h
> @@ -246,6 +246,26 @@ DEFINE_EVENT(ufshcd_template, ufshcd_init,
> int dev_state, int link_state),
> TP_ARGS(dev_name, err, usecs, dev_state, link_state));
>
> +DEFINE_EVENT(ufshcd_template, ufshcd_wl_suspend,
> + TP_PROTO(const char *dev_name, int err, s64 usecs,
> + int dev_state, int link_state),
> + TP_ARGS(dev_name, err, usecs, dev_state, link_state));
> +
> +DEFINE_EVENT(ufshcd_template, ufshcd_wl_resume,
> + TP_PROTO(const char *dev_name, int err, s64 usecs,
> + int dev_state, int link_state),
> + TP_ARGS(dev_name, err, usecs, dev_state, link_state));
> +
> +DEFINE_EVENT(ufshcd_template, ufshcd_wl_runtime_suspend,
> + TP_PROTO(const char *dev_name, int err, s64 usecs,
> + int dev_state, int link_state),
> + TP_ARGS(dev_name, err, usecs, dev_state, link_state));
> +
> +DEFINE_EVENT(ufshcd_template, ufshcd_wl_runtime_resume,
> + TP_PROTO(const char *dev_name, int err, s64 usecs,
> + int dev_state, int link_state),
> + TP_ARGS(dev_name, err, usecs, dev_state, link_state));
> +
> TRACE_EVENT(ufshcd_command,
> TP_PROTO(const char *dev_name, enum ufs_trace_str_t str_t,
> unsigned int tag, u32 doorbell, int transfer_len, u32 intr,
>