Linux SCSI subsystem development
 help / color / mirror / Atom feed
From: Laurence Oberman <loberman@redhat.com>
To: Mateusz Nowicki <mateusz.nowicki@posteo.net>, don.brace@microchip.com
Cc: martin.petersen@oracle.com,
	James.Bottomley@HansenPartnership.com,  storagedev@microchip.com,
	linux-scsi@vger.kernel.org,  linux-kernel@vger.kernel.org
Subject: Re: [PATCH 0/2] scsi: smartpqi: fix PCIe hot reset recovery
Date: Wed, 06 May 2026 21:45:11 -0400	[thread overview]
Message-ID: <9b49bda9e8e3dce89eaf969f452ddd2315c2f953.camel@redhat.com> (raw)
In-Reply-To: <9624a8d152197522d353ef7bb2b4928d1c6238ae.camel@redhat.com>

On Wed, 2026-05-06 at 18:21 -0400, Laurence Oberman wrote:
> On Wed, 2026-05-06 at 14:01 +0000, Mateusz Nowicki wrote:
> > A PCIe bus reset (e.g. "echo 1 > /sys/bus/pci/devices/<bdf>/reset")
> > on a
> > controller without FLR support leaves the HPE SR932i-p Gen10+
> > unusable
> > until reboot: smartpqi registers no pci_error_handlers, so the
> > driver
> > is not notified, firmware reverts to SIS mode, and all queue
> > mappings
> > are dropped while the driver still drives PQI.
> > 
> > Patch 1 adds .reset_prepare / .reset_done reusing
> > pqi_ofa_ctrl_quiesce() / _unquiesce() / pqi_ctrl_init_resume().
> > 
> > Patch 2 raises SIS_CTRL_READY_RESUME_TIMEOUT_SECS from 90s to 180s,
> > matching the cold-boot path; without this patch 1 fails at the SIS
> > ready check because firmware boot after reset takes ~125s on the
> > SR932i-p Gen10+.
> > 
> > Tested on HPE SR932i-p Gen10+ against Linus' master at
> > 74fe02ce122a.
> > 
> > Note: the From: header is my Posteo address because my employer's
> > SMTP
> > is unavailable for external mailing lists.  The Signed-off-by
> > carries
> > the Microchip attribution.
> > 
> > Mateusz Nowicki (2):
> >   scsi: smartpqi: add pci_error_handlers for bus reset recovery
> >   scsi: smartpqi: increase SIS ctrl ready resume timeout to 180s
> > 
> >  drivers/scsi/smartpqi/smartpqi_init.c | 47
> > +++++++++++++++++++++++++++
> >  drivers/scsi/smartpqi/smartpqi_sis.c  |  2 +-
> >  2 files changed, 48 insertions(+), 1 deletion(-)
> > 
> > --
> > 2.43.0
> > 
> > 
> > 
> Hello
> 
> I did reproduce this so I am testing the patches as well.
> They look correct to me, I will reply again after testing with a
> review.
> 
> Thanks
> Laurence
> 
> 
> [2513778.140012] smartpqi 0000:64:00.0: no heartbeat detected - last
> heartbeat count: 4207808511
> [2513778.140031] smartpqi 0000:64:00.0: controller offline: reason
> code
> 0x4 (no controller heartbeat detected)
> [2513778.141346] sd 1:0:0:0: [sda] tag#549 FAILED Result:
> hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK cmd_age=18s
> [2513778.141355] sd 1:0:0:0: [sda] tag#550 FAILED Result: 
> 
> "xfs_buf_ioend_handle_error+0xd5/0x3f0 [xfs]" at daddr 0x9f78 len 8
> error 5
> [2513778.141526] XFS (dm-0): log I/O error -5
> 

Hello 

For the series:

I tested the patches and it recovers with them applied.
The patches look good.

Tested-by: Laurence Oberman <loberman@redhat.com>
Reviewed-by: Laurence Oberman <loberman@redhat.com>


  reply	other threads:[~2026-05-07  1:45 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-05-06 14:01 [PATCH 0/2] scsi: smartpqi: fix PCIe hot reset recovery Mateusz Nowicki
2026-05-06 14:01 ` [PATCH 1/2] scsi: smartpqi: add pci_error_handlers for bus " Mateusz Nowicki
2026-05-06 14:01 ` [PATCH 2/2] scsi: smartpqi: increase SIS ctrl ready resume timeout to 180s Mateusz Nowicki
2026-05-06 22:21 ` [PATCH 0/2] scsi: smartpqi: fix PCIe hot reset recovery Laurence Oberman
2026-05-07  1:45   ` Laurence Oberman [this message]
2026-05-07 10:27     ` mateusz.nowicki

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=9b49bda9e8e3dce89eaf969f452ddd2315c2f953.camel@redhat.com \
    --to=loberman@redhat.com \
    --cc=James.Bottomley@HansenPartnership.com \
    --cc=don.brace@microchip.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-scsi@vger.kernel.org \
    --cc=martin.petersen@oracle.com \
    --cc=mateusz.nowicki@posteo.net \
    --cc=storagedev@microchip.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox