messages from 2015-02-17 13:01:18 to 2015-02-28 11:59:43 UTC [more...]
[LSF/MM TOPIC] Unifying the LIO and SCST target drivers
2015-02-28 11:59 UTC (12+ messages)
` [Lsf-pc] "
[PATCH 0/9] target: Add WRITE_STRIP + READ_INSERT support
2015-02-28 10:36 UTC (10+ messages)
` [PATCH 1/9] target: Convert DIF emulation to use cmd->prot_type
` [PATCH 2/9] target: Add protected fabric + unprotected device support
` [PATCH 3/9] target: Update SPC/SBC emulation for sess_prot_type
` [PATCH 4/9] target: Move cmd->prot_op check into target_check_write_prot
` [PATCH 5/9] target: Add internal WRITE_STRIP support
` [PATCH 6/9] target: Move cmd->prot_op check into target_check_read_prot
` [PATCH 7/9] target: Add internal READ_INSERT support
` [PATCH 8/9] target/file: Add checks for backend DIF emulation
` [PATCH 9/9] loopback: Add fabric_prot_type attribute support
[PATCH 0/3] scsi: storvsc: Some enhancements
2015-02-28 1:01 UTC (4+ messages)
` [PATCH 1/3] scsi: storvsc: Increase the ring buffer size
` [PATCH 2/3] scsi: storvsc: Size the queue depth based on the ringbuffer size
` [PATCH 3/3] scsi: storvsc: Always send on the selected outgoing channel
[PATCH for kernel 4.1] Split SCSI header files
2015-02-27 20:17 UTC (2+ messages)
[Bug 93951] New: Multipath hangs if Active Alua path stops responding (timeouts)
2015-02-27 16:48 UTC
[PATCH -resend 1/1] bfs: bfad_worker cleanup
2015-02-27 15:01 UTC
[patch] tcm_fc: missing curly braces in ft_invl_hw_context()
2015-02-27 11:52 UTC (2+ messages)
crash in pscsi_get_device_type
2015-02-27 11:52 UTC (2+ messages)
[PATCH] qla2xxx: Fix trivial typos in ql_log message
2015-02-27 5:09 UTC (2+ messages)
Help-desk Service Center requires your immediate re-activation of your Email
2015-02-27 3:37 UTC
[PATCH v2 1/1] linux-firmware: Add QLogic BR Series Adapter Firmware
2015-02-26 20:23 UTC (4+ messages)
[PATCH 00/43] hpsa updates
2015-02-26 15:17 UTC (57+ messages)
` [PATCH 01/43] hpsa: add masked physical devices into h->dev[] array
` [PATCH 02/43] hpsa: clean up host, channel, target, lun prints
` [PATCH 03/43] hpsa: rework controller command submission
` [PATCH 04/43] hpsa: clean up aborts
` [PATCH 05/43] hpsa: decrement h->commands_outstanding in fail_all_outstanding_cmds
` [PATCH 06/43] hpsa: hpsa decode sense data for io and tmf
` [PATCH 07/43] hpsa: allow lockup detected to be viewed via sysfs
` [PATCH 08/43] hpsa: make function names consistent
` [PATCH 09/43] hpsa: factor out hpsa_init_cmd function
` [PATCH 10/43] hpsa: do not ignore return value of hpsa_register_scsi
` [PATCH 11/43] hpsa: try resubmitting down raid path on task set full
` [PATCH 12/43] hpsa: factor out hpsa_ioaccel_submit function
` [PATCH 13/43] hpsa: print accurate SSD Smart Path Enabled status
` [PATCH 14/43] hpsa: use ioaccel2 path to submit IOs to physical drives in HBA mode
` [PATCH 15/43] hpsa: Get queue depth from identify physical bmic for physical disks
` [PATCH 16/43] hpsa: break hpsa_free_irqs_and_disable_msix into two functions
` [PATCH 17/43] hpsa: clean up error handling
` [PATCH 18/43] hpsa: refactor freeing of resources into more logical functions
` [PATCH 19/43] hpsa: add ioaccel sg chaining for the ioaccel2 path
` [PATCH 20/43] hpsa: add more ioaccel2 error handling, including underrun statuses
` [PATCH 21/43] hpsa: do not check cmd_alloc return value - it cannnot return NULL
` [PATCH 22/43] hpsa: correct return values from driver functions
` [PATCH 23/43] hpsa: clean up driver init
` [PATCH 24/43] hpsa: clean up some error reporting output in abort handler
` [PATCH 25/43] hpsa: do not print ioaccel2 warning messages about unusual completions
` [PATCH 26/43] hpsa: add support sending aborts to physical devices via the ioaccel2 path
` [PATCH 27/43] hpsa: use helper routines for finishing commands
` [PATCH 28/43] hpsa: don't return abort request until target is complete
` [PATCH 29/43] hpsa: refactor and rework support for sending TEST_UNIT_READY
` [PATCH 30/43] hpsa: performance tweak for hpsa_scatter_gather()
` [PATCH 31/43] hpsa: call pci_release_regions after pci_disable_device
` [PATCH 32/43] hpsa: skip free_irq calls if irqs are not allocated
` [PATCH 33/43] hpsa: cleanup for init_one step 2 in kdump
` [PATCH 34/43] hpsa: fix try_soft_reset error handling
` [PATCH 35/43] hpsa: create workqueue after the driver is ready for use
` [PATCH 36/43] hpsa: add interrupt number to /proc/interrupts interrupt name
` [PATCH 37/43] hpsa: use block layer tag for command allocation
` [PATCH 38/43] hpsa: clean up new block layer tag error handling
` [PATCH 39/43] hpsa: use scsi host_no as hpsa controller number
` [PATCH 40/43] hpsa: cleanup initialization code
` [PATCH 41/43] hpsa: propagate the error code in hpsa_kdump_soft_reset
` [PATCH 42/43] hpsa: cleanup reset
` [PATCH 43/43] hpsa: change driver version
[Bug 90601] New: panic on write to 3ware raid array
2015-02-26 13:38 UTC (4+ messages)
` [Bug 90601] "
[SCSI] csiostor: Chelsio FCoE offload driver
2015-02-26 9:49 UTC (3+ messages)
[PATH V2] scsi_debug: rework resp_report_luns
2015-02-26 7:57 UTC
[PATCH] qla2xxx: Remove use of 'struct timeval'
2015-02-26 4:34 UTC (3+ messages)
[PATCH 0/5] Rename regulator_set_optimum_mode
2015-02-25 23:40 UTC (2+ messages)
sequential I/O on SSD disk varies from 20 to 300 MBytes/s every week
2015-02-25 21:50 UTC (2+ messages)
[PATCH v6] st implement tape statistics
2015-02-25 18:47 UTC (2+ messages)
[PATCH] scsi_debug: rework resp_report_luns
2015-02-25 18:10 UTC (6+ messages)
[patch] megaraid_sas: harmless memory corruption in megasas_mgmt_fw_ioctl()
2015-02-25 13:46 UTC (2+ messages)
RE
2015-02-25 12:42 UTC
[patch] lpfc: missing curly brace in lpfc_online()
2015-02-25 13:24 UTC
[patch] [SCSI] bfa: fix bfa_cb_sfp_state_query()
2015-02-25 13:12 UTC
[PATCH] [SCSI] mvumi: 64bit value for seconds_since1970
2015-02-25 10:48 UTC (2+ messages)
[PATCH v2] scsi: stex: Remove use of struct timeval
2015-02-25 10:44 UTC (2+ messages)
[PATCH v2] [SCSI] bfa: Replace bfa_get_log_time()
2015-02-25 10:41 UTC (2+ messages)
[PATCH v2] scsi: pmcraid: Remove usage of struct timeval
2015-02-25 8:41 UTC (2+ messages)
[ANNOUNCE]: SCST 3.0.1 released
2015-02-25 5:26 UTC
[PATCH v3 0/4] Add ioctl and debug utilities to UFS driver
2015-02-24 15:10 UTC (13+ messages)
` [PATCH v3 1/4] scsi: ufs: add ioctl interface for query request
` [PATCH v3 2/4] scsi: ufs: add debugfs for ufs
` [PATCH v3 3/4] scsi: ufs: add trace events and dump prints for debug
` [PATCH v3 4/4] scsi: ufs: inject errors to verify error handling
[PATCH 0/10] qla2xxx: Fix various warnings reported by static source code analysis tools
2015-02-24 8:39 UTC (4+ messages)
[PATCH] pm80xx: Added pm8006 controller support
2015-02-24 8:36 UTC (2+ messages)
[PATCH] fixed invalid assignment of 64bit mask to host dma_boundary for scatter gather segment boundary limit
2015-02-23 23:42 UTC (3+ messages)
[PATCH] sg: fix overflow in timeout calculation
2015-02-23 20:05 UTC (2+ messages)
[scsi 1/2] scsi_debug: schedule_resp fix input variable check
2015-02-23 18:28 UTC (5+ messages)
` [scsi 2/2] scsi_debug: fix REPORT LUNS Well Known LU
[scsi 1/2 V2] scsi_debug: schedule_resp fix input variable check
2015-02-23 18:26 UTC (2+ messages)
[PATCH 0/4] scsi_debug cleanup
2015-02-23 18:23 UTC (9+ messages)
` [PATCH 1/4] scsi_debug: define pr_fmt() for consistent logging
` [PATCH 2/4] scsi_debug: use SCSI_W_LUN_REPORT_LUNS instead of SAM2_WLUN_REPORT_LUNS;
` [PATCH 3/4] scsi_debug: vfree is null safe so drop the check
` [PATCH 4/4] scsi_debug: make dump_sector static
[PATCH 0/3] SCSI-debug: Deletion of a few unnecessary checks
2015-02-23 18:15 UTC (7+ messages)
` [PATCH 1/3] SCSI-debug: Deletion of unnecessary checks before the function call "vfree"
` [PATCH 2/3] SCSI-debug: Less function calls in scsi_debug_init() after error detection
` [PATCH 3/3] SCSI-debug: Fix exception handling for an alignment/granularity mismatch in scsi_debug_init()
[PATCH] scsi_debug: check for bigger value first
2015-02-23 18:02 UTC (2+ messages)
[SCSI] ipr: Increase max concurrent oustanding commands
2015-02-23 14:29 UTC (2+ messages)
[PATCH] uas: Add US_FL_NO_REPORT_OPCODES for JMicron JMS539
2015-02-23 12:41 UTC
[PATCH 0/8] target: Fixes for SPC/SBC device emulation
2015-02-23 6:13 UTC (7+ messages)
` [PATCH 5/8] target: Add sanity checks for DPO/FUA bit usage
[PATCH v2 0/4] Add ioctl and debug utilities to UFS driver
2015-02-22 15:00 UTC (7+ messages)
` [PATCH v2 2/4] scsi: ufs: add debugfs for ufs
` [PATCH v2 3/4] scsi: ufs: add trace events and dump prints for debug
[GIT PULL] Final round of SCSI updates for the 3.19+ merge window
2015-02-22 2:51 UTC
[GIT PULL] target updates for v3.20-rc1
2015-02-21 21:24 UTC (2+ messages)
[PATCH] scsi: mvsas support for Asus P9A-I SAS on-board controller
2015-02-20 22:38 UTC
Concerns about "mpt2sas: Added Reply Descriptor Post Queue (RDPQ) Array support"
2015-02-20 7:19 UTC (6+ messages)
[hpsa] regression, does not recognise tape robot changer
2015-02-19 23:05 UTC (2+ messages)
[Bug 16058] New: [BUG] Cannot boot any kernel from 2.6.27 on if a 256 byte sector SCSI disk is attached
2015-02-19 15:49 UTC (2+ messages)
` [Bug 16058] "
[Bug 15562] SCSI Generic block io queueing can lock up
2015-02-19 15:41 UTC
[Bug 14534] mvsas : repeatably disconnects all disks during RAID6 resync
2015-02-19 15:34 UTC
[Bug 10890] Heavy iSCSI traffic triggers memory allocation complaints and system lockup
2015-02-19 15:14 UTC
[Bug 10554] scsi_scan doesn't set the queue depth for tape drive
2015-02-19 15:12 UTC
[PATCH] xen-scsiback: some modifications about code comment
2015-02-19 14:16 UTC (3+ messages)
` [Xen-devel] "
Congratulations!
2015-02-18 23:58 UTC
BUG v3.19: reference count warning when removing scsi_debug device
2015-02-18 21:00 UTC (3+ messages)
[PATCH 1/1] linux-firmware: Add QLogic BR Series Adapter Firmware
2015-02-18 0:52 UTC (3+ messages)
[PATCH 1/2] cciss: remove duplicate entries from board_type struct
2015-02-17 16:40 UTC (2+ messages)
` [PATCH 2/2] cciss: correct the non-resettable board list
scsi: Implement per-cpu logging buffer
2015-02-17 13:01 UTC (5+ messages)
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox