* [PATCH v1] scsi: ufs: no need to send one Abort Task TM in case the task in DB was cleared @ 2020-08-04 12:35 Bean Huo 2020-08-06 9:03 ` Can Guo 0 siblings, 1 reply; 6+ messages in thread From: Bean Huo @ 2020-08-04 12:35 UTC (permalink / raw) To: alim.akhtar, avri.altman, asutoshd, jejb, martin.petersen, stanley.chu, beanhuo, bvanassche, tomas.winkler, cang Cc: linux-scsi, linux-kernel From: Bean Huo <beanhuo@micron.com> If the bit corresponds to a task in the Doorbell register has been cleared, no need to poll the status of the task on the device side and to send an Abort Task TM. This patch also deletes dispensable dev_err() in case of the task already completed. Signed-off-by: Bean Huo <beanhuo@micron.com> --- drivers/scsi/ufs/ufshcd.c | 9 +++------ 1 file changed, 3 insertions(+), 6 deletions(-) diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c index 307622284239..581b4ab52bf4 100644 --- a/drivers/scsi/ufs/ufshcd.c +++ b/drivers/scsi/ufs/ufshcd.c @@ -6425,19 +6425,16 @@ static int ufshcd_abort(struct scsi_cmnd *cmd) return ufshcd_eh_host_reset_handler(cmd); ufshcd_hold(hba, false); - reg = ufshcd_readl(hba, REG_UTP_TRANSFER_REQ_DOOR_BELL); /* If command is already aborted/completed, return SUCCESS */ - if (!(test_bit(tag, &hba->outstanding_reqs))) { - dev_err(hba->dev, - "%s: cmd at tag %d already completed, outstanding=0x%lx, doorbell=0x%x\n", - __func__, tag, hba->outstanding_reqs, reg); + if (!(test_bit(tag, &hba->outstanding_reqs))) goto out; - } + reg = ufshcd_readl(hba, REG_UTP_TRANSFER_REQ_DOOR_BELL); if (!(reg & (1 << tag))) { dev_err(hba->dev, "%s: cmd was completed, but without a notifying intr, tag = %d", __func__, tag); + goto out; } /* Print Transfer Request of aborted task */ -- 2.17.1 ^ permalink raw reply related [flat|nested] 6+ messages in thread
* Re: [PATCH v1] scsi: ufs: no need to send one Abort Task TM in case the task in DB was cleared 2020-08-04 12:35 [PATCH v1] scsi: ufs: no need to send one Abort Task TM in case the task in DB was cleared Bean Huo @ 2020-08-06 9:03 ` Can Guo 2020-08-06 9:50 ` Bean Huo 0 siblings, 1 reply; 6+ messages in thread From: Can Guo @ 2020-08-06 9:03 UTC (permalink / raw) To: Bean Huo Cc: alim.akhtar, avri.altman, asutoshd, jejb, martin.petersen, stanley.chu, beanhuo, bvanassche, tomas.winkler, linux-scsi, linux-kernel Hi Bean, On 2020-08-04 20:35, Bean Huo wrote: > From: Bean Huo <beanhuo@micron.com> > > If the bit corresponds to a task in the Doorbell register has been > cleared, no need to poll the status of the task on the device side > and to send an Abort Task TM. > This patch also deletes dispensable dev_err() in case of the task > already completed. > > Signed-off-by: Bean Huo <beanhuo@micron.com> > --- > drivers/scsi/ufs/ufshcd.c | 9 +++------ > 1 file changed, 3 insertions(+), 6 deletions(-) > > diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c > index 307622284239..581b4ab52bf4 100644 > --- a/drivers/scsi/ufs/ufshcd.c > +++ b/drivers/scsi/ufs/ufshcd.c > @@ -6425,19 +6425,16 @@ static int ufshcd_abort(struct scsi_cmnd *cmd) > return ufshcd_eh_host_reset_handler(cmd); > > ufshcd_hold(hba, false); > - reg = ufshcd_readl(hba, REG_UTP_TRANSFER_REQ_DOOR_BELL); > /* If command is already aborted/completed, return SUCCESS */ > - if (!(test_bit(tag, &hba->outstanding_reqs))) { > - dev_err(hba->dev, > - "%s: cmd at tag %d already completed, outstanding=0x%lx, > doorbell=0x%x\n", > - __func__, tag, hba->outstanding_reqs, reg); > + if (!(test_bit(tag, &hba->outstanding_reqs))) > goto out; > - } > > + reg = ufshcd_readl(hba, REG_UTP_TRANSFER_REQ_DOOR_BELL); > if (!(reg & (1 << tag))) { > dev_err(hba->dev, > "%s: cmd was completed, but without a notifying intr, tag = %d", > __func__, tag); > + goto out; Please check Stanley's recent change to ufshcd_abort, you may want to rebase your change on his and do goto cleanup here. @Stanley correct me if I am wrong. But even if you do a goto cleanup here, we still lost the chances to dump host infos/regs like it does in the old code. If a cmd was completed but without a notifying intr, this is kind of a problem that we/host should look into, because it's pasted at least 30 sec since the cmd was sent, so those dumps are necessary to debug the problem. How about moving blow prints in front of this part? Thanks, Can Guo. > } > > /* Print Transfer Request of aborted task */ ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH v1] scsi: ufs: no need to send one Abort Task TM in case the task in DB was cleared 2020-08-06 9:03 ` Can Guo @ 2020-08-06 9:50 ` Bean Huo 2020-08-06 10:07 ` Can Guo 0 siblings, 1 reply; 6+ messages in thread From: Bean Huo @ 2020-08-06 9:50 UTC (permalink / raw) To: Can Guo Cc: alim.akhtar, avri.altman, asutoshd, jejb, martin.petersen, stanley.chu, beanhuo, bvanassche, tomas.winkler, linux-scsi, linux-kernel > > Please check Stanley's recent change to ufshcd_abort, you may > want to rebase your change on his and do goto cleanup here. > @Stanley correct me if I am wrong. > > But even if you do a goto cleanup here, we still lost the > chances to dump host infos/regs like it does in the old code. > If a cmd was completed but without a notifying intr, this is > kind of a problem that we/host should look into, because it's > pasted at least 30 sec since the cmd was sent, so those dumps > are necessary to debug the problem. How about moving blow prints > in front of this part? > > Thanks, > > Can Guo. > > > } > > > > /* Print Transfer Request of aborted task */ Hi Can Thanks, do you mean that change to like this: Author: Bean Huo <beanhuo@micron.com> Date: Thu Aug 6 11:34:45 2020 +0200 scsi: ufs: no need to send one Abort Task TM in case the task in was cleared If the bit corresponds to a task in the Doorbell register has been cleared, no need to poll the status of the task on the device side and to send an Abort Task TM. This patch also deletes dispensable dev_err() in case of the task already completed. Signed-off-by: Bean Huo <beanhuo@micron.com> diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c index 307622284239..f7c91ce9e294 100644 --- a/drivers/scsi/ufs/ufshcd.c +++ b/drivers/scsi/ufs/ufshcd.c @@ -6425,23 +6425,9 @@ static int ufshcd_abort(struct scsi_cmnd *cmd) return ufshcd_eh_host_reset_handler(cmd); ufshcd_hold(hba, false); - reg = ufshcd_readl(hba, REG_UTP_TRANSFER_REQ_DOOR_BELL); /* If command is already aborted/completed, return SUCCESS */ - if (!(test_bit(tag, &hba->outstanding_reqs))) { - dev_err(hba->dev, - "%s: cmd at tag %d already completed, outstanding=0x%lx, doorbell=0x%x\n", - __func__, tag, hba->outstanding_reqs, reg); + if (!(test_bit(tag, &hba->outstanding_reqs))) goto out; - } - - if (!(reg & (1 << tag))) { - dev_err(hba->dev, - "%s: cmd was completed, but without a notifying intr, tag = %d", - __func__, tag); - } - - /* Print Transfer Request of aborted task */ - dev_err(hba->dev, "%s: Device abort task at tag %d\n", __func__, tag); /* * Print detailed info about aborted request. @@ -6462,6 +6448,17 @@ static int ufshcd_abort(struct scsi_cmnd *cmd) } hba->req_abort_count++; + reg = ufshcd_readl(hba, REG_UTP_TRANSFER_REQ_DOOR_BELL); + if (!(reg & (1 << tag))) { + dev_err(hba->dev, + "%s: cmd was completed, but without a notifying intr, tag = %d", + __func__, tag); + goto cleanup; + } + + /* Print Transfer Request of aborted task */ + dev_err(hba->dev, "%s: Device abort task at tag %d\n", __func__, tag); + /* Skip task abort in case previous aborts failed and report failure */ if (lrbp->req_abort_skip) { err = -EIO; @@ -6526,6 +6523,7 @@ static int ufshcd_abort(struct scsi_cmnd *cmd) goto out; } +cleanup: scsi_dma_unmap(cmd); spin_lock_irqsave(host->host_lock, flags); Author: Stanley Chu <stanley.chu@mediatek.com> Date: Thu Aug 6 11:48:00 2020 +0200 scsi: ufs: Cleanup completed request without interrupt notification If somehow no interrupt notification is raised for a completed request and its doorbell bit is cleared by host, UFS driver needs to cleanup its outstanding bit in ufshcd_abort(). Otherwise, system may behave abnormally by below flow: After ufshcd_abort() returns, this request will be requeued by SCSI layer with its outstanding bit set. Any future completed request will trigger ufshcd_transfer_req_compl() to handle all "completed outstanding bits". In this time, the "abnormal outstanding bit" will be detected and the "requeued request" will be chosen to execute request post-processing flow. This is wrong because this request is still "alive". Signed-off-by: Stanley Chu <stanley.chu@mediatek.com> diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c index f7c91ce9e294..29d5e5e5d0e0 100644 --- a/drivers/scsi/ufs/ufshcd.c +++ b/drivers/scsi/ufs/ufshcd.c @@ -6489,7 +6489,7 @@ static int ufshcd_abort(struct scsi_cmnd *cmd) /* command completed already */ dev_err(hba->dev, "%s: cmd at tag %d successfully cleared from DB.\n", __func__, tag); - goto out; + goto cleanup; } else { dev_err(hba->dev, "%s: no response from device. tag = %d, err %d\n", ^ permalink raw reply related [flat|nested] 6+ messages in thread
* Re: [PATCH v1] scsi: ufs: no need to send one Abort Task TM in case the task in DB was cleared 2020-08-06 9:50 ` Bean Huo @ 2020-08-06 10:07 ` Can Guo 2020-08-10 15:41 ` Bean Huo 0 siblings, 1 reply; 6+ messages in thread From: Can Guo @ 2020-08-06 10:07 UTC (permalink / raw) To: Bean Huo Cc: alim.akhtar, avri.altman, asutoshd, jejb, martin.petersen, stanley.chu, beanhuo, bvanassche, tomas.winkler, linux-scsi, linux-kernel Hi Bean, On 2020-08-06 17:50, Bean Huo wrote: >> >> Please check Stanley's recent change to ufshcd_abort, you may >> want to rebase your change on his and do goto cleanup here. >> @Stanley correct me if I am wrong. >> >> But even if you do a goto cleanup here, we still lost the >> chances to dump host infos/regs like it does in the old code. >> If a cmd was completed but without a notifying intr, this is >> kind of a problem that we/host should look into, because it's >> pasted at least 30 sec since the cmd was sent, so those dumps >> are necessary to debug the problem. How about moving blow prints >> in front of this part? >> >> Thanks, >> >> Can Guo. >> >> > } >> > >> > /* Print Transfer Request of aborted task */ > > Hi Can > > Thanks, do you mean that change to like this: > > > Author: Bean Huo <beanhuo@micron.com> > Date: Thu Aug 6 11:34:45 2020 +0200 > > scsi: ufs: no need to send one Abort Task TM in case the task in > was cleared > > If the bit corresponds to a task in the Doorbell register has been > cleared, no need to poll the status of the task on the device side > and to send an Abort Task TM. > This patch also deletes dispensable dev_err() in case of the task > already completed. > > Signed-off-by: Bean Huo <beanhuo@micron.com> > > diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c > index 307622284239..f7c91ce9e294 100644 > --- a/drivers/scsi/ufs/ufshcd.c > +++ b/drivers/scsi/ufs/ufshcd.c > @@ -6425,23 +6425,9 @@ static int ufshcd_abort(struct scsi_cmnd *cmd) > return ufshcd_eh_host_reset_handler(cmd); > > ufshcd_hold(hba, false); > - reg = ufshcd_readl(hba, REG_UTP_TRANSFER_REQ_DOOR_BELL); > /* If command is already aborted/completed, return SUCCESS */ > - if (!(test_bit(tag, &hba->outstanding_reqs))) { > - dev_err(hba->dev, > - "%s: cmd at tag %d already completed, > outstanding=0x%lx, doorbell=0x%x\n", > - __func__, tag, hba->outstanding_reqs, reg); > + if (!(test_bit(tag, &hba->outstanding_reqs))) > goto out; > - } > - > - if (!(reg & (1 << tag))) { > - dev_err(hba->dev, > - "%s: cmd was completed, but without a notifying intr, > tag = %d", > - __func__, tag); > - } > - > - /* Print Transfer Request of aborted task */ > - dev_err(hba->dev, "%s: Device abort task at tag %d\n", > __func__, tag); > > /* > * Print detailed info about aborted request. > @@ -6462,6 +6448,17 @@ static int ufshcd_abort(struct scsi_cmnd *cmd) > } > hba->req_abort_count++; > > + reg = ufshcd_readl(hba, REG_UTP_TRANSFER_REQ_DOOR_BELL); > + if (!(reg & (1 << tag))) { > + dev_err(hba->dev, > + "%s: cmd was completed, but without a notifying intr, > tag = %d", > + __func__, tag); > + goto cleanup; > + } > + > + /* Print Transfer Request of aborted task */ > + dev_err(hba->dev, "%s: Device abort task at tag %d\n", > __func__, tag); > + The rest looks good but let below two lines stay where they were. /* Print Transfer Request of aborted task */ dev_err(hba->dev, "%s: Device abort task at tag %d\n", __func__, tag); Thanks, Can Guo. > /* Skip task abort in case previous aborts failed and report > failure */ > if (lrbp->req_abort_skip) { > err = -EIO; > @@ -6526,6 +6523,7 @@ static int ufshcd_abort(struct scsi_cmnd *cmd) > goto out; > } > > +cleanup: > scsi_dma_unmap(cmd); > > spin_lock_irqsave(host->host_lock, flags); > > > > > > Author: Stanley Chu <stanley.chu@mediatek.com> > Date: Thu Aug 6 11:48:00 2020 +0200 > > scsi: ufs: Cleanup completed request without interrupt notification > > If somehow no interrupt notification is raised for a completed > request > and its doorbell bit is cleared by host, UFS driver needs to > cleanup > its outstanding bit in ufshcd_abort(). Otherwise, system may behave > abnormally by below flow: > > After ufshcd_abort() returns, this request will be requeued by SCSI > layer with its outstanding bit set. Any future completed request > will trigger ufshcd_transfer_req_compl() to handle all "completed > outstanding bits". In this time, the "abnormal outstanding bit" > will be detected and the "requeued request" will be chosen to > execute > request post-processing flow. This is wrong because this request is > still "alive". > > Signed-off-by: Stanley Chu <stanley.chu@mediatek.com> > > diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c > index f7c91ce9e294..29d5e5e5d0e0 100644 > --- a/drivers/scsi/ufs/ufshcd.c > +++ b/drivers/scsi/ufs/ufshcd.c > @@ -6489,7 +6489,7 @@ static int ufshcd_abort(struct scsi_cmnd *cmd) > /* command completed already */ > dev_err(hba->dev, "%s: cmd at tag %d > successfully cleared from DB.\n", > __func__, tag); > - goto out; > + goto cleanup; > } else { > dev_err(hba->dev, > "%s: no response from device. tag = %d, > err %d\n", ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH v1] scsi: ufs: no need to send one Abort Task TM in case the task in DB was cleared 2020-08-06 10:07 ` Can Guo @ 2020-08-10 15:41 ` Bean Huo 2020-08-10 23:13 ` Stanley Chu 0 siblings, 1 reply; 6+ messages in thread From: Bean Huo @ 2020-08-10 15:41 UTC (permalink / raw) To: Can Guo, Stanley Chu Cc: alim.akhtar, avri.altman, asutoshd, jejb, martin.petersen, stanley.chu, beanhuo, bvanassche, tomas.winkler, linux-scsi, linux-kernel On Thu, 2020-08-06 at 18:07 +0800, Can Guo wrote: > Hi Bean, > > On 2020-08-06 17:50, Bean Huo wrote: > > > > > > Please check Stanley's recent change to ufshcd_abort, you may > > > want to rebase your change on his and do goto cleanup here. > > > @Stanley correct me if I am wrong. > > > > > > But even if you do a goto cleanup here, we still lost the > > > chances to dump host infos/regs like it does in the old code. > > > If a cmd was completed but without a notifying intr, this is > > > kind of a problem that we/host should look into, because it's > > > pasted at least 30 sec since the cmd was sent, so those dumps > > > are necessary to debug the problem. How about moving blow prints > > > in front of this part? > > > > > > Thanks, > > > > > > Can Guo. > > > > > > > } > > > > > > > > /* Print Transfer Request of aborted task */ > > > > Hi Can > > > > Thanks, do you mean that change to like this: > > > > > > Author: Bean Huo <beanhuo@micron.com> > > Date: Thu Aug 6 11:34:45 2020 +0200 > > > > scsi: ufs: no need to send one Abort Task TM in case the task > > in > > was cleared > > > > If the bit corresponds to a task in the Doorbell register has > > been > > cleared, no need to poll the status of the task on the device > > side > > and to send an Abort Task TM. > > This patch also deletes dispensable dev_err() in case of the > > task > > already completed. > > > > Signed-off-by: Bean Huo <beanhuo@micron.com> > > > > diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c > > index 307622284239..f7c91ce9e294 100644 > > --- a/drivers/scsi/ufs/ufshcd.c > > +++ b/drivers/scsi/ufs/ufshcd.c > > @@ -6425,23 +6425,9 @@ static int ufshcd_abort(struct scsi_cmnd > > *cmd) > > return ufshcd_eh_host_reset_handler(cmd); > > > > ufshcd_hold(hba, false); > > - reg = ufshcd_readl(hba, REG_UTP_TRANSFER_REQ_DOOR_BELL); > > /* If command is already aborted/completed, return SUCCESS > > */ > > - if (!(test_bit(tag, &hba->outstanding_reqs))) { > > - dev_err(hba->dev, > > - "%s: cmd at tag %d already completed, > > outstanding=0x%lx, doorbell=0x%x\n", > > - __func__, tag, hba->outstanding_reqs, reg); > > + if (!(test_bit(tag, &hba->outstanding_reqs))) > > goto out; > > - } > > - > > - if (!(reg & (1 << tag))) { > > - dev_err(hba->dev, > > - "%s: cmd was completed, but without a notifying > > intr, > > tag = %d", > > - __func__, tag); > > - } > > - > > - /* Print Transfer Request of aborted task */ > > - dev_err(hba->dev, "%s: Device abort task at tag %d\n", > > __func__, tag); > > > > /* > > * Print detailed info about aborted request. > > @@ -6462,6 +6448,17 @@ static int ufshcd_abort(struct scsi_cmnd > > *cmd) > > } > > hba->req_abort_count++; > > > > + reg = ufshcd_readl(hba, REG_UTP_TRANSFER_REQ_DOOR_BELL); > > + if (!(reg & (1 << tag))) { > > + dev_err(hba->dev, > > + "%s: cmd was completed, but without a notifying > > intr, > > tag = %d", > > + __func__, tag); > > + goto cleanup; > > + } > > + > > + /* Print Transfer Request of aborted task */ > > + dev_err(hba->dev, "%s: Device abort task at tag %d\n", > > __func__, tag); > > + > > The rest looks good but let below two lines stay where they were. > > /* Print Transfer Request of aborted task */ > dev_err(hba->dev, "%s: Device abort task at tag %d\n", > __func__, tag); > > > Thanks, > > Can Guo. > Hi Can I will change it in the next version. Hi Stanly would you mind I take your patch into my next version patchset? Since we both will add a new same goto label. I will keep your patch authorship. Thanks, Bean ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH v1] scsi: ufs: no need to send one Abort Task TM in case the task in DB was cleared 2020-08-10 15:41 ` Bean Huo @ 2020-08-10 23:13 ` Stanley Chu 0 siblings, 0 replies; 6+ messages in thread From: Stanley Chu @ 2020-08-10 23:13 UTC (permalink / raw) To: Bean Huo Cc: Can Guo, alim.akhtar, avri.altman, asutoshd, jejb, martin.petersen, beanhuo, bvanassche, tomas.winkler, linux-scsi, linux-kernel Hi Bean, On Mon, 2020-08-10 at 17:41 +0200, Bean Huo wrote: > On Thu, 2020-08-06 at 18:07 +0800, Can Guo wrote: > > Hi Bean, > > > > On 2020-08-06 17:50, Bean Huo wrote: > > > > > > > > Please check Stanley's recent change to ufshcd_abort, you may > > > > want to rebase your change on his and do goto cleanup here. > > > > @Stanley correct me if I am wrong. > > > > > > > > But even if you do a goto cleanup here, we still lost the > > > > chances to dump host infos/regs like it does in the old code. > > > > If a cmd was completed but without a notifying intr, this is > > > > kind of a problem that we/host should look into, because it's > > > > pasted at least 30 sec since the cmd was sent, so those dumps > > > > are necessary to debug the problem. How about moving blow prints > > > > in front of this part? > > > > > > > > Thanks, > > > > > > > > Can Guo. > > > > > > > > > } > > > > > > > > > > /* Print Transfer Request of aborted task */ > > > > > > Hi Can > > > > > > Thanks, do you mean that change to like this: > > > > > > > > > Author: Bean Huo <beanhuo@micron.com> > > > Date: Thu Aug 6 11:34:45 2020 +0200 > > > > > > scsi: ufs: no need to send one Abort Task TM in case the task > > > in > > > was cleared > > > > > > If the bit corresponds to a task in the Doorbell register has > > > been > > > cleared, no need to poll the status of the task on the device > > > side > > > and to send an Abort Task TM. > > > This patch also deletes dispensable dev_err() in case of the > > > task > > > already completed. > > > > > > Signed-off-by: Bean Huo <beanhuo@micron.com> > > > > > > diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c > > > index 307622284239..f7c91ce9e294 100644 > > > --- a/drivers/scsi/ufs/ufshcd.c > > > +++ b/drivers/scsi/ufs/ufshcd.c > > > @@ -6425,23 +6425,9 @@ static int ufshcd_abort(struct scsi_cmnd > > > *cmd) > > > return ufshcd_eh_host_reset_handler(cmd); > > > > > > ufshcd_hold(hba, false); > > > - reg = ufshcd_readl(hba, REG_UTP_TRANSFER_REQ_DOOR_BELL); > > > /* If command is already aborted/completed, return SUCCESS > > > */ > > > - if (!(test_bit(tag, &hba->outstanding_reqs))) { > > > - dev_err(hba->dev, > > > - "%s: cmd at tag %d already completed, > > > outstanding=0x%lx, doorbell=0x%x\n", > > > - __func__, tag, hba->outstanding_reqs, reg); > > > + if (!(test_bit(tag, &hba->outstanding_reqs))) > > > goto out; > > > - } > > > - > > > - if (!(reg & (1 << tag))) { > > > - dev_err(hba->dev, > > > - "%s: cmd was completed, but without a notifying > > > intr, > > > tag = %d", > > > - __func__, tag); > > > - } > > > - > > > - /* Print Transfer Request of aborted task */ > > > - dev_err(hba->dev, "%s: Device abort task at tag %d\n", > > > __func__, tag); > > > > > > /* > > > * Print detailed info about aborted request. > > > @@ -6462,6 +6448,17 @@ static int ufshcd_abort(struct scsi_cmnd > > > *cmd) > > > } > > > hba->req_abort_count++; > > > > > > + reg = ufshcd_readl(hba, REG_UTP_TRANSFER_REQ_DOOR_BELL); > > > + if (!(reg & (1 << tag))) { > > > + dev_err(hba->dev, > > > + "%s: cmd was completed, but without a notifying > > > intr, > > > tag = %d", > > > + __func__, tag); > > > + goto cleanup; > > > + } > > > + > > > + /* Print Transfer Request of aborted task */ > > > + dev_err(hba->dev, "%s: Device abort task at tag %d\n", > > > __func__, tag); > > > + > > > > The rest looks good but let below two lines stay where they were. > > > > /* Print Transfer Request of aborted task */ > > dev_err(hba->dev, "%s: Device abort task at tag %d\n", > > __func__, tag); > > > > > > Thanks, > > > > Can Guo. > > > Hi Can > I will change it in the next version. > > > Hi Stanly > would you mind I take your patch into my next version patchset? Since > we both will add a new same goto label. I will keep your patch > authorship. Sure, OK to me : ) Thanks, Stanley Chu ^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2020-08-10 23:14 UTC | newest] Thread overview: 6+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2020-08-04 12:35 [PATCH v1] scsi: ufs: no need to send one Abort Task TM in case the task in DB was cleared Bean Huo 2020-08-06 9:03 ` Can Guo 2020-08-06 9:50 ` Bean Huo 2020-08-06 10:07 ` Can Guo 2020-08-10 15:41 ` Bean Huo 2020-08-10 23:13 ` Stanley Chu
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox