Re: Adaptec 29320LPE errors on boot

["Rodrigo Severo" <rodrigo@fabricadeideias.com>]

On 3/5/08, Salyzyn, Mark <Mark_Salyzyn@adaptec.com> wrote:
> Sounds like you have a bad SCSI cable or drive.
>
>  Do any of these drives work in any other OS environment?

This same drive with this same cable with this same terminator works
well with a 39160 (which usses another driver: the aic7xxx) on the
same OS environment so I don't think this is a cable or drive issue.

Besides I tested with four different cables (different models and
manufactures, all pretend to be U320 compatible). The problem is
unchanged when I use different cables and terminators.

I also tested with several different disks (different models and
manufactures). The problem is still unchanged.


Regards,

Rodrigo Severo

-- 
---------------------------------------------------------------------------------------
Rodrigo Severo

Fábrica de Idéias
SBS Quadra 2 - Bloco S - Ed. Empire Center - Sala 1.301
Brasília - DF - CEP 70070-904
Tel. (61) 3321-1357       Fax (61) 3223-1712
---------------------------------------------------------------------------------------
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html