Re: [PATCH v2] scsi: libsas: Fix exp-attached end device cannot be scanned in again after probe failed

[John Garry <john.g.garry@oracle.com>]

On 20/05/2024 09:29, yangxingui wrote:
> Friendly ping ...

I'll check when I return from vacation in a couple of days

> 
> On 2024/4/24 16:08, Xingui Yang wrote:
>> We found that it is judged as broadcast flutter when the exp-attached end
>> device reconnects after probe failed, as follows:
>>
>> [78779.654026] sas: broadcast received: 0
>> [78779.654037] sas: REVALIDATING DOMAIN on port 0, pid:10
>> [78779.654680] sas: ex 500e004aaaaaaa1f phy05 change count has changed
>> [78779.662977] sas: ex 500e004aaaaaaa1f phy05 originated 
>> BROADCAST(CHANGE)
>> [78779.662986] sas: ex 500e004aaaaaaa1f phy05 new device attached
>> [78779.663079] sas: ex 500e004aaaaaaa1f phy05:U:8 attached: 
>> 500e004aaaaaaa05 (stp)
>> [78779.693542] hisi_sas_v3_hw 0000:b4:02.0: dev[16:5] found
>> [78779.701155] sas: done REVALIDATING DOMAIN on port 0, pid:10, res 0x0
>> [78779.707864] sas: Enter sas_scsi_recover_host busy: 0 failed: 0
>> ...
>> [78835.161307] sas: --- Exit sas_scsi_recover_host: busy: 0 failed: 0 
>> tries: 1
>> [78835.171344] sas: sas_probe_sata: for exp-attached device 
>> 500e004aaaaaaa05 returned -19
>> [78835.180879] hisi_sas_v3_hw 0000:b4:02.0: dev[16:5] is gone
>> [78835.187487] sas: broadcast received: 0
>> [78835.187504] sas: REVALIDATING DOMAIN on port 0, pid:10
>> [78835.188263] sas: ex 500e004aaaaaaa1f phy05 change count has changed
>> [78835.195870] sas: ex 500e004aaaaaaa1f phy05 originated 
>> BROADCAST(CHANGE)
>> [78835.195875] sas: ex 500e004aaaaaaa1f rediscovering phy05
>> [78835.196022] sas: ex 500e004aaaaaaa1f phy05:U:A attached: 
>> 500e004aaaaaaa05 (stp)
>> [78835.196026] sas: ex 500e004aaaaaaa1f phy05 broadcast flutter
>> [78835.197615] sas: done REVALIDATING DOMAIN on port 0, pid:10, res 0x0
>>
>> The cause of the problem is that the related ex_phy's 
>> attached_sas_addr was
>> not cleared after the end device probe failed. In order to solve the 
>> above
>> problem, a function sas_ex_unregister_end_dev() is defined to clear the
>> ex_phy information and unregister the end device after the 
>> exp-attached end
>> device probe failed.
>>
>> As the sata device is an asynchronous probe, the sata device may probe

SATA, almost always capitalize acronyms

>> failed after done REVALIDATING DOMAIN. Then after its port is added to 
>> the
>> sas_port_del_list, the port will not be deleted until the end of the next
>> REVALIDATING DOMAIN and sas_destruct_ports() is called. A warning about
>> creating a duplicate port will occur in the new REVALIDATING DOMAIN when
>> the end device reconnects. Therefore, the previous destroy_list and
>> sas_port_del_list should be handled before REVALIDATING DOMAIN.
>>
>> Signed-off-by: Xingui Yang <yangxingui@huawei.com>
>> ---
>> Changes since v1:
>> - Simplify the process of getting ex_phy id based on Jason's suggestion.
>> - Update commit information.
>> ---
>>   drivers/scsi/libsas/sas_discover.c | 2 ++
>>   drivers/scsi/libsas/sas_expander.c | 8 ++++++++
>>   drivers/scsi/libsas/sas_internal.h | 6 +++++-
>>   3 files changed, 15 insertions(+), 1 deletion(-)
>>
>> diff --git a/drivers/scsi/libsas/sas_discover.c 
>> b/drivers/scsi/libsas/sas_discover.c
>> index 8fb7c41c0962..aae90153f4c6 100644
>> --- a/drivers/scsi/libsas/sas_discover.c
>> +++ b/drivers/scsi/libsas/sas_discover.c
>> @@ -517,6 +517,8 @@ static void sas_revalidate_domain(struct 
>> work_struct *work)
>>       struct sas_ha_struct *ha = port->ha;
>>       struct domain_device *ddev = port->port_dev;
>> +    sas_destruct_devices(port);
>> +    sas_destruct_ports(port);
>>       /* prevent revalidation from finding sata links in recovery */
>>       mutex_lock(&ha->disco_mutex);
>>       if (test_bit(SAS_HA_ATA_EH_ACTIVE, &ha->state)) {
>> diff --git a/drivers/scsi/libsas/sas_expander.c 
>> b/drivers/scsi/libsas/sas_expander.c
>> index f6e6db8b8aba..45793c10009b 100644
>> --- a/drivers/scsi/libsas/sas_expander.c
>> +++ b/drivers/scsi/libsas/sas_expander.c
>> @@ -1856,6 +1856,14 @@ static void sas_unregister_devs_sas_addr(struct 
>> domain_device *parent,
>>       }
>>   }
>> +void sas_ex_unregister_end_dev(struct domain_device *dev)
>> +{
>> +    struct domain_device *parent = dev->parent;
>> +    struct sas_phy *phy = dev->phy;
>> +
>> +    sas_unregister_devs_sas_addr(parent, phy->number, true);
>> +}
>> +
>>   static int sas_discover_bfs_by_root_level(struct domain_device *root,
>>                         const int level)
>>   {
>> diff --git a/drivers/scsi/libsas/sas_internal.h 
>> b/drivers/scsi/libsas/sas_internal.h
>> index 3804aef165ad..434f928c2ed8 100644
>> --- a/drivers/scsi/libsas/sas_internal.h
>> +++ b/drivers/scsi/libsas/sas_internal.h
>> @@ -50,6 +50,7 @@ void sas_discover_event(struct asd_sas_port *port, 
>> enum discover_event ev);
>>   void sas_init_dev(struct domain_device *dev);
>>   void sas_unregister_dev(struct asd_sas_port *port, struct 
>> domain_device *dev);
>> +void sas_ex_unregister_end_dev(struct domain_device *dev);
>>   void sas_scsi_recover_host(struct Scsi_Host *shost);
>> @@ -145,7 +146,10 @@ static inline void sas_fail_probe(struct 
>> domain_device *dev, const char *func, i
>>           func, dev->parent ? "exp-attached" :
>>           "direct-attached",
>>           SAS_ADDR(dev->sas_addr), err);
>> -    sas_unregister_dev(dev->port, dev);
>> +    if (dev->parent && !dev_is_expander(dev->dev_type))
>> +        sas_ex_unregister_end_dev(dev);
>> +    else
>> +        sas_unregister_dev(dev->port, dev);
>>   }
>>   static inline void sas_fill_in_rphy(struct domain_device *dev,
>>