From: greg kh <gregkh@us.ibm.com>
To: linux-scsi@vger.kernel.org
Cc: linux-usb-devel@lists.sourceforge.net
Subject: Re: [linux-usb-devel] Re: [PATCH] USB changes for 2.5.58
Date: Thu, 16 Jan 2003 12:43:47 -0800 [thread overview]
Message-ID: <b075fh$phv$1@main.gmane.org> (raw)
In-Reply-To: b073ja$12i$1@penguin.transmeta.com
Copied to linux-usb-devel, as they should also see this...
On Thu, 16 Jan 2003 12:10:18 -0800, Linus Torvalds wrote:
> In article <20030116195306.GA32697@kroah.com>, Greg KH <greg@kroah.com>
> wrote:
>>On Thu, Jan 16, 2003 at 11:43:23AM -0800, Matthew Dharm wrote:
>>> Well, we only create the host when the device is first attached. After
>>> that, if it goes away and comes back, we re-connect it to the old SCSI
>>> host.
>>
>>Ick, so when the device is gone, where does the SCSI host go? Is it
>>still represented in sysfs and in the SCSI core properly?
>
> This is pure and utter USB storage stupidity, and nothing else.
>
> When the USB storage device is unplugged, the device should be
> unregistered. It should be _gone_. It isn't sleeping, it's dead. It's
> an ex-device.
Agreed, I thought most of that logic had been removed from the
usb-storage driver as the SCSI layer can now handle removing devices just
fine (or so Mike Anderson tells me :)
thanks,
greg k-h
next prev parent reply other threads:[~2003-01-16 22:50 UTC|newest]
Thread overview: 104+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <10426732153816@kroah.com>
[not found] ` <10426732212871@kroah.com>
[not found] ` <20030116093112.B29001@one-eyed-alien.net>
[not found] ` <20030116173539.GA31235@kroah.com>
2003-01-16 19:43 ` [linux-usb-devel] Re: [PATCH] USB changes for 2.5.58 Matthew Dharm
2003-01-16 19:53 ` Greg KH
[not found] ` <20030116195306.GA32697@kroah.com>
2003-01-16 20:10 ` Linus Torvalds
2003-01-16 20:43 ` greg kh [this message]
2003-01-16 21:41 ` Linus Torvalds
2003-01-16 22:51 ` Matthew Dharm
2003-01-16 20:40 ` David Brownell
2003-01-16 20:48 ` Mike Anderson
2003-01-16 23:43 ` Oliver Neukum
2003-01-17 8:50 ` Mike Anderson
2003-01-17 10:55 ` Oliver Neukum
2003-01-17 15:06 ` Alan Stern
2003-01-17 18:54 ` Matthew Dharm
2003-01-17 20:25 ` Mike Anderson
2003-01-17 22:07 ` Oliver Neukum
2003-01-17 20:26 ` [linux-usb-devel] " Oliver Neukum
2003-01-17 20:49 ` Mike Anderson
2003-01-20 17:36 ` Luben Tuikov
2003-01-20 18:23 ` Oliver Neukum
2003-01-20 18:56 ` Luben Tuikov
2003-01-20 19:10 ` [linux-usb-devel] " Oliver Neukum
2003-01-20 19:50 ` David Brownell
2003-01-21 3:31 ` Alan
2003-01-21 7:17 ` Oliver Neukum
2003-01-21 11:57 ` [linux-usb-devel] " Douglas Gilbert
2003-01-21 13:48 ` Oliver Neukum
2003-01-21 18:22 ` Luben Tuikov
2003-01-21 13:30 ` James Bottomley
2003-01-20 20:08 ` David Brownell
2003-01-20 20:48 ` [linux-usb-devel] " Oliver Neukum
2003-01-20 21:24 ` David Brownell
2003-01-20 21:51 ` [linux-usb-devel] " Oliver Neukum
2003-01-20 22:26 ` David Brownell
2003-01-20 23:00 ` Oliver Neukum
2003-01-21 0:44 ` David Brownell
2003-01-21 0:50 ` Oliver Neukum
2003-01-21 18:16 ` Luben Tuikov
2003-01-21 19:00 ` Oliver Neukum
2003-01-21 20:02 ` [linux-usb-devel] " Luben Tuikov
2003-01-21 21:02 ` Alan Stern
2003-01-22 21:50 ` Luben Tuikov
2003-01-22 22:46 ` Oliver Neukum
2003-01-23 17:46 ` Luben Tuikov
2003-01-23 18:19 ` Oliver Neukum
2003-01-23 19:07 ` Luben Tuikov
2003-01-23 19:40 ` Oliver Neukum
2003-01-23 20:28 ` Doug Ledford
2003-01-23 20:59 ` Oliver Neukum
2003-01-23 21:34 ` Doug Ledford
2003-01-23 22:39 ` Oliver Neukum
2003-01-23 23:23 ` Doug Ledford
2003-01-23 23:25 ` Matthew Dharm
2003-01-24 15:34 ` Alan Stern
2003-01-24 16:06 ` Oliver Neukum
2003-01-24 17:58 ` [linux-usb-devel] " Doug Ledford
2003-01-24 19:00 ` Luben Tuikov
2003-01-24 22:23 ` Oliver.Neukum
2003-01-24 19:10 ` Luben Tuikov
2003-01-24 19:56 ` [linux-usb-devel] " Alan Stern
2003-01-24 20:11 ` Luben Tuikov
2003-01-24 21:09 ` Luben Tuikov
2003-01-24 21:55 ` Alan Stern
2003-01-24 22:03 ` Luben Tuikov
2003-01-24 23:21 ` Mike Anderson
2003-01-24 21:48 ` Doug Ledford
2003-01-24 22:59 ` Mike Anderson
2003-01-24 23:17 ` [linux-usb-devel] " Doug Ledford
2003-01-25 0:24 ` Luben Tuikov
2003-01-25 1:35 ` Mike Anderson
2003-01-24 23:25 ` Matthew Dharm
2003-01-25 0:05 ` Doug Ledford
2003-01-25 0:45 ` Matthew Dharm
2003-01-25 1:07 ` Doug Ledford
2003-02-02 18:13 ` Matthew Dharm
2003-02-02 20:06 ` Matthew Dharm
2003-02-03 17:17 ` Mike Anderson
2003-02-16 21:18 ` Matthew Dharm
2003-02-17 19:37 ` Mike Anderson
2003-02-17 19:51 ` Patrick Mansfield
2003-02-23 7:48 ` Matthew Dharm
2003-02-26 23:37 ` Mike Anderson
2003-02-27 1:10 ` Matthew Dharm
2003-02-27 6:37 ` Mike Anderson
2003-02-27 19:32 ` Matthew Dharm
2003-03-01 1:41 ` Matthew Dharm
2003-02-02 3:49 ` Matthew Dharm
2003-01-25 1:24 ` Luben Tuikov
2003-01-24 0:15 ` Patrick Mansfield
2003-01-24 8:33 ` David Brownell
2003-01-23 20:41 ` A different look at block device hotswap in the Linux kernel Steven Dake
2003-01-23 21:07 ` Matthew Jacob
2003-01-23 21:06 ` Steven Dake
2003-01-23 21:16 ` Matthew Jacob
2003-01-24 0:07 ` Oliver Neukum
2003-01-24 0:21 ` Matthew Jacob
2003-01-24 7:53 ` David Brownell
2003-01-24 15:26 ` Matthew Jacob
2003-01-24 0:54 ` Steven Dake
2003-01-24 2:35 ` [linux-usb-devel] " Matthew Dharm
2003-01-22 21:30 ` [linux-usb-devel] Re: [PATCH] USB changes for 2.5.58 David Brownell
2003-01-20 22:16 ` Luben Tuikov
2003-01-20 22:51 ` David Brownell
2003-01-20 23:27 ` Oliver Neukum
2003-01-22 12:07 Bennie J. Venter
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='b075fh$phv$1@main.gmane.org' \
--to=gregkh@us.ibm.com \
--cc=linux-scsi@vger.kernel.org \
--cc=linux-usb-devel@lists.sourceforge.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox