From mboxrd@z Thu Jan 1 00:00:00 1970 From: Michael Schmitz Subject: Re: [PATCH 2/3] m68k/atari - atari_scsi: change abort/reset return codes Date: Wed, 12 Mar 2014 20:03:19 +1300 Message-ID: References: <1393660265-19384-1-git-send-email-schmitz@debian.org> <1393660265-19384-3-git-send-email-schmitz@debian.org> Mime-Version: 1.0 (Apple Message framework v624) Content-Type: text/plain; charset=US-ASCII; format=flowed Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: Sender: linux-m68k-owner@vger.kernel.org To: Finn Thain Cc: linux-m68k@vger.kernel.org, arnd@arndb.de, Michael Schmitz , geert@linux-m68k.org, JBottomley@parallels.com, linux-scsi@vger.kernel.org List-Id: linux-scsi@vger.kernel.org Finn, nothings' been merged yet, still pending review from the SCSI team. Comments below. > > This is a larger version of Michael's patch. It takes care of the > header > files and comments and it addresses sun3_NCR5380 as well as > atari_NCR5380. > This means that the initio.h include (!) can be dropped from > sun3_scsi.h. > > Signed-off-by: Finn Thain > > --- > > Michael, I'm assuming that your patch hasn't been merged already (I > didn't > find it in any of the likely repos). Please go ahead and add your > sign-off > on this version if it is satisfactory. I didn't test this patch: I > presume > that sun3_NCR5380 would need the same abort/reset fixes that > atari_NCR5380 > needed... > > > diff --git a/drivers/scsi/atari_NCR5380.c > b/drivers/scsi/atari_NCR5380.c > index 0f3cdbc..e4aaf9a 100644 > --- a/drivers/scsi/atari_NCR5380.c > +++ b/drivers/scsi/atari_NCR5380.c > @@ -2683,11 +2683,11 @@ int NCR5380_abort(Scsi_Cmnd *cmd) > local_irq_restore(flags); > cmd->scsi_done(cmd); > falcon_release_lock_if_possible(hostdata); > - return SCSI_ABORT_SUCCESS; > + return SUCCESS; > } else { > /* local_irq_restore(flags); */ > printk("scsi%d: abort of connected command failed!\n", HOSTNO); > - return SCSI_ABORT_ERROR; > + return FAILED; > } > } > #endif > @@ -2711,7 +2711,7 @@ int NCR5380_abort(Scsi_Cmnd *cmd) > * yet... */ > tmp->scsi_done(tmp); > falcon_release_lock_if_possible(hostdata); > - return SCSI_ABORT_SUCCESS; > + return SUCCESS; > } > } > > @@ -2729,7 +2729,7 @@ int NCR5380_abort(Scsi_Cmnd *cmd) > if (hostdata->connected) { > local_irq_restore(flags); > ABRT_PRINTK("scsi%d: abort failed, command connected.\n", HOSTNO); > - return SCSI_ABORT_SNOOZE; > + return FAILED; > } > > /* > @@ -2764,7 +2764,7 @@ int NCR5380_abort(Scsi_Cmnd *cmd) > ABRT_PRINTK("scsi%d: aborting disconnected command.\n", HOSTNO); > > if (NCR5380_select(instance, cmd, (int)cmd->tag)) > - return SCSI_ABORT_BUSY; > + return FAILED; > > ABRT_PRINTK("scsi%d: nexus reestablished.\n", HOSTNO); > > @@ -2791,7 +2791,7 @@ int NCR5380_abort(Scsi_Cmnd *cmd) > local_irq_restore(flags); > tmp->scsi_done(tmp); > falcon_release_lock_if_possible(hostdata); > - return SCSI_ABORT_SUCCESS; > + return SUCCESS; > } > } > } > @@ -2816,7 +2816,7 @@ int NCR5380_abort(Scsi_Cmnd *cmd) > */ > falcon_release_lock_if_possible(hostdata); > > - return SCSI_ABORT_NOT_RUNNING; > + return FAILED; > } > > > @@ -2825,7 +2825,7 @@ int NCR5380_abort(Scsi_Cmnd *cmd) > * > * Purpose : reset the SCSI bus. > * > - * Returns : SCSI_RESET_WAKEUP > + * Returns : SUCCESS or FAILURE > * > */ > > @@ -2834,7 +2834,7 @@ static int NCR5380_bus_reset(Scsi_Cmnd *cmd) > SETUP_HOSTDATA(cmd->device->host); > int i; > unsigned long flags; > -#if 1 > +#if defined(RESET_RUN_DONE) > Scsi_Cmnd *connected, *disconnected_queue; > #endif > > @@ -2859,7 +2859,14 @@ static int NCR5380_bus_reset(Scsi_Cmnd *cmd) > * through anymore ... */ > (void)NCR5380_read(RESET_PARITY_INTERRUPT_REG); > > -#if 1 /* XXX Should now be done by midlevel code, but it's broken XXX > */ > + /* MSch 20140115 - looking at the generic NCR5380 driver, all of this > + * should go. > + * Catch-22: if we don't clear all queues, the SCSI driver lock will > + * not be reset by atari_scsi_reset()! Bugger - typo of mine, meant to say 'released' not 'reset'. > + */ > + > +#if defined(RESET_RUN_DONE) > + /* XXX Should now be done by midlevel code, but it's broken XXX */ > /* XXX see below XXX */ > > /* MSch: old-style reset: actually abort all command processing here > */ > @@ -2915,7 +2922,7 @@ static int NCR5380_bus_reset(Scsi_Cmnd *cmd) > * the midlevel code that the reset was SUCCESSFUL, and there is no > * need to 'wake up' the commands by a request_sense > */ > - return SCSI_RESET_SUCCESS | SCSI_RESET_BUS_RESET; > + return SUCCESS; > #else /* 1 */ > > /* MSch: new-style reset handling: let the mid-level do what it can > */ > @@ -2963,6 +2970,6 @@ static int NCR5380_bus_reset(Scsi_Cmnd *cmd) > local_irq_restore(flags); > > /* we did no complete reset of all commands, so a wakeup is required > */ > - return SCSI_RESET_WAKEUP | SCSI_RESET_BUS_RESET; > + return SUCCESS; > #endif /* 1 */ > } > diff --git a/drivers/scsi/atari_scsi.c b/drivers/scsi/atari_scsi.c > index a3e6c8a..3ed39e5 100644 > --- a/drivers/scsi/atari_scsi.c > +++ b/drivers/scsi/atari_scsi.c > @@ -821,7 +821,7 @@ static int atari_scsi_bus_reset(Scsi_Cmnd *cmd) > } else { > atari_turnon_irq(IRQ_MFP_FSCSI); > } > - if ((rv & SCSI_RESET_ACTION) == SCSI_RESET_SUCCESS) > + if (rv == SUCCESS) > falcon_release_lock_if_possible(hostdata); > > return rv; > diff --git a/drivers/scsi/atari_scsi.h b/drivers/scsi/atari_scsi.h > index 11c624b..ae559f4 100644 > --- a/drivers/scsi/atari_scsi.h > +++ b/drivers/scsi/atari_scsi.h > @@ -54,32 +54,6 @@ > #define NCR5380_dma_xfer_len(i,cmd,phase) \ > atari_dma_xfer_len(cmd->SCp.this_residual,cmd,((phase) & SR_IO) ? 0 > : 1) > > -/* former generic SCSI error handling stuff */ > - > -#define SCSI_ABORT_SNOOZE 0 > -#define SCSI_ABORT_SUCCESS 1 > -#define SCSI_ABORT_PENDING 2 > -#define SCSI_ABORT_BUSY 3 > -#define SCSI_ABORT_NOT_RUNNING 4 > -#define SCSI_ABORT_ERROR 5 > - > -#define SCSI_RESET_SNOOZE 0 > -#define SCSI_RESET_PUNT 1 > -#define SCSI_RESET_SUCCESS 2 > -#define SCSI_RESET_PENDING 3 > -#define SCSI_RESET_WAKEUP 4 > -#define SCSI_RESET_NOT_RUNNING 5 > -#define SCSI_RESET_ERROR 6 > - > -#define SCSI_RESET_SYNCHRONOUS 0x01 > -#define SCSI_RESET_ASYNCHRONOUS 0x02 > -#define SCSI_RESET_SUGGEST_BUS_RESET 0x04 > -#define SCSI_RESET_SUGGEST_HOST_RESET 0x08 > - > -#define SCSI_RESET_BUS_RESET 0x100 > -#define SCSI_RESET_HOST_RESET 0x200 > -#define SCSI_RESET_ACTION 0xff > - > Thanks, I'd missed those. > /* Debugging printk definitions: > * > * ARB -> arbitration > diff --git a/drivers/scsi/sun3_NCR5380.c b/drivers/scsi/sun3_NCR5380.c > index 636bbe0..455b1f0 100644 > --- a/drivers/scsi/sun3_NCR5380.c > +++ b/drivers/scsi/sun3_NCR5380.c > @@ -2664,11 +2664,11 @@ static int NCR5380_abort(struct scsi_cmnd *cmd) > #endif > local_irq_restore(flags); > cmd->scsi_done(cmd); > - return SCSI_ABORT_SUCCESS; > + return SUCCESS; > } else { > /* local_irq_restore(flags); */ > printk("scsi%d: abort of connected command failed!\n", HOSTNO); > - return SCSI_ABORT_ERROR; > + return FAILED; > } > } > #endif > @@ -2691,7 +2691,7 @@ static int NCR5380_abort(struct scsi_cmnd *cmd) > /* Tagged queuing note: no tag to free here, hasn't been assigned > * yet... */ > tmp->scsi_done(tmp); > - return SCSI_ABORT_SUCCESS; > + return SUCCESS; > } > > /* > @@ -2708,7 +2708,7 @@ static int NCR5380_abort(struct scsi_cmnd *cmd) > if (hostdata->connected) { > local_irq_restore(flags); > ABRT_PRINTK("scsi%d: abort failed, command connected.\n", HOSTNO); > - return SCSI_ABORT_SNOOZE; > + return FAILED; > } > > /* > @@ -2743,7 +2743,7 @@ static int NCR5380_abort(struct scsi_cmnd *cmd) > ABRT_PRINTK("scsi%d: aborting disconnected command.\n", HOSTNO); > > if (NCR5380_select (instance, cmd, (int) cmd->tag)) > - return SCSI_ABORT_BUSY; > + return FAILED; > > ABRT_PRINTK("scsi%d: nexus reestablished.\n", HOSTNO); > > @@ -2769,7 +2769,7 @@ static int NCR5380_abort(struct scsi_cmnd *cmd) > #endif > local_irq_restore(flags); > tmp->scsi_done(tmp); > - return SCSI_ABORT_SUCCESS; > + return SUCCESS; > } > } > > @@ -2786,7 +2786,7 @@ static int NCR5380_abort(struct scsi_cmnd *cmd) > local_irq_restore(flags); > printk(KERN_INFO "scsi%d: warning : SCSI command probably > completed successfully before abortion\n", HOSTNO); > > - return SCSI_ABORT_NOT_RUNNING; > + return FAILED; > } > > > @@ -2795,7 +2795,7 @@ static int NCR5380_abort(struct scsi_cmnd *cmd) > * > * Purpose : reset the SCSI bus. > * > - * Returns : SCSI_RESET_WAKEUP > + * Returns : SUCCESS or FAILURE > * > */ > > @@ -2804,7 +2804,7 @@ static int NCR5380_bus_reset(struct scsi_cmnd > *cmd) > SETUP_HOSTDATA(cmd->device->host); > int i; > unsigned long flags; > -#if 1 > +#if defined(RESET_RUN_DONE) > struct scsi_cmnd *connected, *disconnected_queue; > #endif > > @@ -2826,8 +2826,15 @@ static int NCR5380_bus_reset(struct scsi_cmnd > *cmd) > * through anymore ... */ > (void)NCR5380_read( RESET_PARITY_INTERRUPT_REG ); > > -#if 1 /* XXX Should now be done by midlevel code, but it's broken XXX > */ > - /* XXX see below XXX > */ > + /* MSch 20140115 - looking at the generic NCR5380 driver, all of this > + * should go. > + * Catch-22: if we don't clear all queues, the SCSI driver lock will > + * not be reset by atari_scsi_reset()! > + */ > That's not appropriate here - sun3 doesn't have dodgy locking across IDE, SCSI and floppy. The abort and reset should work much like in the Mac5380 driver. I.e. don't bother about clearing the queues, IIRC. Cheers, Michael > + > +#if defined(RESET_RUN_DONE) > + /* XXX Should now be done by midlevel code, but it's broken XXX */ > + /* XXX see below XXX */ > > /* MSch: old-style reset: actually abort all command processing > here */ > > @@ -2876,7 +2883,7 @@ static int NCR5380_bus_reset(struct scsi_cmnd > *cmd) > * the midlevel code that the reset was SUCCESSFUL, and there is > no > * need to 'wake up' the commands by a request_sense > */ > - return SCSI_RESET_SUCCESS | SCSI_RESET_BUS_RESET; > + return SUCCESS; > #else /* 1 */ > > /* MSch: new-style reset handling: let the mid-level do what it > can */ > @@ -2924,7 +2931,7 @@ static int NCR5380_bus_reset(struct scsi_cmnd > *cmd) > local_irq_restore(flags); > > /* we did no complete reset of all commands, so a wakeup is > required */ > - return SCSI_RESET_WAKEUP | SCSI_RESET_BUS_RESET; > + return SUCCESS; > #endif /* 1 */ > } > > diff --git a/drivers/scsi/sun3_scsi.c b/drivers/scsi/sun3_scsi.c > index e2c009b..0cfa542 100644 > --- a/drivers/scsi/sun3_scsi.c > +++ b/drivers/scsi/sun3_scsi.c > @@ -79,7 +79,6 @@ > #define REAL_DMA > > #include "scsi.h" > -#include "initio.h" > #include > #include "sun3_scsi.h" > > -- > To unsubscribe from this list: send the line "unsubscribe linux-m68k" > in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html