linux-scsi.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Sumit Saxena <sumit.saxena@broadcom.com>
To: James.Bottomley@hansenpartnership.com, martin.petersen@oracle.com
Cc: linux-scsi@vger.kernel.org,
	Kashyap Desai <kashyap.desai@broadcom.com>,
	lucz@geza.com, stable@vger.kernel.org
Subject: RE: [PATCH] Do not fire MR_DCMD_PD_LIST_QUERY to controllers which do not support it
Date: Fri, 8 Jul 2016 16:00:04 +0530	[thread overview]
Message-ID: <b940e39cc9d2b600cc6164cb05bbcd9e@mail.gmail.com> (raw)
In-Reply-To: <1467973232-17382-1-git-send-email-sumit.saxena@broadcom.com>

Please ignore this patch. I missed to add megaraid_sas in subject line. I
realized after sending. Will be resending with proper subject. Sorry for
spamming.

> -----Original Message-----
> From: Sumit Saxena [mailto:sumit.saxena@broadcom.com]
> Sent: Friday, July 08, 2016 3:51 PM
> To: James.Bottomley@HansenPartnership.com; martin.petersen@oracle.com
> Cc: linux-scsi@vger.kernel.org; kashyap.desai@broadcom.com;
> lucz@geza.com; stable@vger.kernel.org; Sumit Saxena
> Subject: [PATCH] Do not fire MR_DCMD_PD_LIST_QUERY to controllers which
> do not support it
>
> There was an issue reported by Lucz Geza on Dell Perc 6i. As per issue
> reported,
> driver goes into an infinite error reporting loop as soon as there is a
> change in
> the status of one of the arrays (degrade, resync online etc …).
> Below are the error logs reported continuously-
>
> Jun 25 08:49:30 ns8 kernel: [  757.757017] megaraid_sas 0000:02:00.0: DCMD
> failed/not supported by firmware: megasas_get_pd_list 4115 Jun 25 08:49:30
> ns8 kernel: [  757.778017] megaraid_sas 0000:02:00.0: DCMD failed/not
> supported by firmware: megasas_get_pd_list 4115 Jun 25 08:49:30 ns8
> kernel: [
> 757.799017] megaraid_sas 0000:02:00.0: DCMD failed/not supported by
> firmware: megasas_get_pd_list 4115 Jun 25 08:49:30 ns8 kernel: [
> 757.820018]
> megaraid_sas 0000:02:00.0: DCMD failed/not supported by firmware:
> megasas_get_pd_list 4115 Jun 25 08:49:30 ns8 kernel: [  757.841018]
> megaraid_sas 0000:02:00.0: DCMD failed/not supported by firmware:
> megasas_get_pd_list 4115
>
> This issue is very much specific to controllers which do not support DCMD-
> MR_DCMD_PD_LIST_QUERY.
> In case of any hotplugging/rescanning of drives, AEN thread will be
> scheduled by
> driver and fire
> DCMD- MR_DCMD_PD_LIST_QUERY and if this DCMD is failed then driver will
> fail this event processing and will not go ahead for further events. This
> will cause
> infinite loop of same event getting retried infinitely and causing above
> mentioned logs.
>
> Fix for this problem is: not to fire DCMD MR_DCMD_PD_LIST_QUERY for
> controllers which do not support it and send DCMD SUCCESS status to AEN
> function so that it can go ahead with other event processing.
>
> Reported-by: Lucz Geza <geza@lucz.com>
> Cc: <stable@vger.kernel.org>
> Signed-off-by: Sumit Saxena <sumit.saxena@broadcom.com>
>
> ---
>  drivers/scsi/megaraid/megaraid_sas_base.c | 6 ++++++
>  1 file changed, 6 insertions(+)
>
> diff --git a/drivers/scsi/megaraid/megaraid_sas_base.c
> b/drivers/scsi/megaraid/megaraid_sas_base.c
> index f4b0690..2dab3dc 100644
> --- a/drivers/scsi/megaraid/megaraid_sas_base.c
> +++ b/drivers/scsi/megaraid/megaraid_sas_base.c
> @@ -4079,6 +4079,12 @@ megasas_get_pd_list(struct megasas_instance
> *instance)
>  	struct MR_PD_ADDRESS *pd_addr;
>  	dma_addr_t ci_h = 0;
>
> +	if (instance->pd_list_not_supported) {
> +		dev_info(&instance->pdev->dev, "MR_DCMD_PD_LIST_QUERY
> "
> +		"not supported by firmware\n");
> +		return ret;
> +	}
> +
>  	cmd = megasas_get_cmd(instance);
>
>  	if (!cmd) {
> --
> 2.4.11

      reply	other threads:[~2016-07-08 10:30 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-07-08 10:20 [PATCH] Do not fire MR_DCMD_PD_LIST_QUERY to controllers which do not support it Sumit Saxena
2016-07-08 10:30 ` Sumit Saxena [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=b940e39cc9d2b600cc6164cb05bbcd9e@mail.gmail.com \
    --to=sumit.saxena@broadcom.com \
    --cc=James.Bottomley@hansenpartnership.com \
    --cc=kashyap.desai@broadcom.com \
    --cc=linux-scsi@vger.kernel.org \
    --cc=lucz@geza.com \
    --cc=martin.petersen@oracle.com \
    --cc=stable@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).