Linux SCSI subsystem development
 help / color / mirror / Atom feed
From: Tony Battersby <tonyb@cybernetics.com>
To: Nilesh Javali <njavali@marvell.com>,
	GR-QLogic-Storage-Upstream@marvell.com,
	"James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>,
	"Martin K. Petersen" <martin.petersen@oracle.com>
Cc: linux-scsi <linux-scsi@vger.kernel.org>,
	target-devel@vger.kernel.org, scst-devel@lists.sourceforge.net,
	"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>
Subject: [PATCH 06/15] scsi: qla2xxx: improve debug output for term exchange
Date: Mon, 8 Sep 2025 14:54:30 -0400	[thread overview]
Message-ID: <bee30703-6f32-483e-bad6-a3fc7e52b477@cybernetics.com> (raw)
In-Reply-To: <f8977250-638c-4d7d-ac0c-65f742b8d535@cybernetics.com>

(target mode)

Print better debug info when terminating a command, and print the
response status from the hardware.

Signed-off-by: Tony Battersby <tonyb@cybernetics.com>
---
 drivers/scsi/qla2xxx/qla_dbg.c    |  2 +-
 drivers/scsi/qla2xxx/qla_target.c | 40 +++++++++++++++++++++++++++----
 2 files changed, 36 insertions(+), 6 deletions(-)

diff --git a/drivers/scsi/qla2xxx/qla_dbg.c b/drivers/scsi/qla2xxx/qla_dbg.c
index 5136549005e7..ff4124eccc9c 100644
--- a/drivers/scsi/qla2xxx/qla_dbg.c
+++ b/drivers/scsi/qla2xxx/qla_dbg.c
@@ -54,7 +54,7 @@
  * | Misc                         |       0xd303       | 0xd031-0xd0ff	|
  * |                              |                    | 0xd101-0xd1fe	|
  * |                              |                    | 0xd214-0xd2fe	|
- * | Target Mode		  |	  0xe081       |		|
+ * | Target Mode		  |	  0xe084       |		|
  * | Target Mode Management	  |	  0xf09b       | 0xf002		|
  * |                              |                    | 0xf046-0xf049  |
  * | Target Mode Task Management  |	  0x1000d      |		|
diff --git a/drivers/scsi/qla2xxx/qla_target.c b/drivers/scsi/qla2xxx/qla_target.c
index df5c9aac5617..72c74f8f5375 100644
--- a/drivers/scsi/qla2xxx/qla_target.c
+++ b/drivers/scsi/qla2xxx/qla_target.c
@@ -1909,6 +1909,10 @@ static void qlt_24xx_retry_term_exchange(struct scsi_qla_host *vha,
 	 * ABTS response. So, in it ID fields are reversed.
 	 */
 
+	ql_dbg(ql_dbg_tgt_mgt, vha, 0xe082,
+	    "qla_target(%d): tag %u: Sending TERM EXCH CTIO for ABTS\n",
+	    vha->vp_idx, le32_to_cpu(entry->exchange_addr_to_abort));
+
 	ctio->entry_type = CTIO_TYPE7;
 	ctio->entry_count = 1;
 	ctio->nport_handle = entry->nport_handle;
@@ -3620,16 +3624,24 @@ static int __qlt_send_term_exchange(struct qla_qpair *qpair,
 {
 	struct scsi_qla_host *vha = qpair->vha;
 	struct ctio7_to_24xx *ctio24;
-	struct qla_hw_data *ha = vha->hw;
 	request_t *pkt;
 	int ret = 0;
 	uint16_t temp;
 
-	ql_dbg(ql_dbg_tgt, vha, 0xe009, "Sending TERM EXCH CTIO (ha=%p)\n", ha);
-
 	if (cmd)
 		vha = cmd->vha;
 
+	if (cmd) {
+		ql_dbg(ql_dbg_tgt_mgt, vha, 0xe009,
+		    "qla_target(%d): tag %lld: Sending TERM EXCH CTIO state %d cmd_sent_to_fw %u\n",
+		    vha->vp_idx, cmd->se_cmd.tag, cmd->state,
+		    cmd->cmd_sent_to_fw);
+	} else {
+		ql_dbg(ql_dbg_tgt_mgt, vha, 0xe009,
+		    "qla_target(%d): tag %u: Sending TERM EXCH CTIO (no cmd)\n",
+		    vha->vp_idx, le32_to_cpu(atio->u.isp24.exchange_addr));
+	}
+
 	pkt = (request_t *)qla2x00_alloc_iocbs_ready(qpair, NULL);
 	if (pkt == NULL) {
 		ql_dbg(ql_dbg_tgt, vha, 0xe050,
@@ -3920,6 +3932,7 @@ static void qlt_do_ctio_completion(struct scsi_qla_host *vha,
 	struct se_cmd *se_cmd;
 	struct qla_tgt_cmd *cmd;
 	struct qla_qpair *qpair = rsp->qpair;
+	uint16_t ctio_flags;
 
 	if (handle & CTIO_INTERMEDIATE_HANDLE_MARK) {
 		/* That could happen only in case of an error/reset/abort */
@@ -3931,11 +3944,28 @@ static void qlt_do_ctio_completion(struct scsi_qla_host *vha,
 		return;
 	}
 
+	ctio_flags = le16_to_cpu(ctio->flags);
+
 	cmd = qlt_ctio_to_cmd(vha, rsp, handle, ctio);
-	if (cmd == NULL)
+	if (unlikely(cmd == NULL)) {
+		if ((handle & ~QLA_TGT_HANDLE_MASK) == QLA_TGT_SKIP_HANDLE &&
+		    (ctio_flags & 0xe1ff) == (CTIO7_FLAGS_STATUS_MODE_1 |
+		     CTIO7_FLAGS_TERMINATE)) {
+			u32 tag = le32_to_cpu(ctio->exchange_address);
+
+			if (status == CTIO_SUCCESS)
+				ql_dbg(ql_dbg_tgt_mgt, vha, 0xe083,
+				    "qla_target(%d): tag %u: term exchange successful\n",
+				    vha->vp_idx, tag);
+			else
+				ql_dbg(ql_dbg_tgt_mgt, vha, 0xe084,
+				    "qla_target(%d): tag %u: term exchange failed; status = 0x%x\n",
+				    vha->vp_idx, tag, status);
+		}
 		return;
+	}
 
-	if ((le16_to_cpu(ctio->flags) & CTIO7_FLAGS_DATA_OUT) && cmd->sess)
+	if ((ctio_flags & CTIO7_FLAGS_DATA_OUT) && cmd->sess)
 		qlt_chk_edif_rx_sa_delete_pending(vha, cmd->sess, ctio);
 
 	se_cmd = &cmd->se_cmd;
-- 
2.43.0



  parent reply	other threads:[~2025-09-08 18:54 UTC|newest]

Thread overview: 37+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-09-08 18:45 [PATCH 00/15] qla2xxx target mode improvements Tony Battersby
2025-09-08 18:47 ` [PATCH 01/15] Revert "scsi: qla2xxx: Perform lockless command completion in abort path" Tony Battersby
2025-09-08 18:48 ` [PATCH 02/15] scsi: qla2xxx: fix initiator mode with qlini_mode=exclusive Tony Battersby
2025-09-08 18:50 ` [PATCH 03/15] scsi: qla2xxx: fix lost interrupts with qlini_mode=disabled Tony Battersby
2025-09-08 18:51 ` [PATCH 04/15] scsi: qla2xxx: use reinit_completion on mbx_intr_comp Tony Battersby
2025-09-08 18:53 ` [PATCH 05/15] scsi: qla2xxx: remove code for unsupported hardware Tony Battersby
2025-09-08 18:54 ` Tony Battersby [this message]
2025-09-08 18:56 ` [PATCH 07/15] scsi: qla2xxx: fix term exchange when cmd_sent_to_fw == 1 Tony Battersby
2025-09-08 18:58 ` [PATCH 08/15] scsi: qla2xxx: fix oops during cmd abort Tony Battersby
2025-09-08 18:59   ` [SCST PATCH " Tony Battersby
2025-09-11 14:21   ` [PATCH " Dmitry Bogdanov
2025-09-24 19:41     ` Tony Battersby
2025-09-24 19:43       ` [PATCH v2 09/16] scsi: qla2xxx: fix races with aborting commands Tony Battersby
2025-09-24 19:45         ` [SCST PATCH " Tony Battersby
2025-09-25  8:42       ` [DMARC Error]Re: [PATCH 08/15] scsi: qla2xxx: fix oops during cmd abort Dmitry Bogdanov
2025-09-08 19:01 ` [PATCH 09/15] scsi: qla2xxx: improve checks in qlt_xmit_response / qlt_rdy_to_xfer Tony Battersby
2025-09-08 19:02 ` [PATCH 10/15] scsi: qla2xxx: fix TMR failure handling Tony Battersby
2025-09-12 14:36   ` Dmitry Bogdanov
2025-09-16 16:04     ` Tony Battersby
2025-09-17 13:06       ` [DMARC Error]Re: " Dmitry Bogdanov
2025-09-17 20:38         ` Tony Battersby
2025-09-08 19:04 ` [PATCH 11/15] scsi: qla2xxx: fix invalid memory access with big CDBs Tony Battersby
2025-09-08 19:05   ` [SCST PATCH " Tony Battersby
2025-09-08 19:07 ` [PATCH 12/15] scsi: qla2xxx: add cmd->rsp_sent Tony Battersby
2025-09-08 19:08   ` [SCST PATCH " Tony Battersby
2025-09-15 13:47   ` [PATCH " Dmitry Bogdanov
2025-09-24 20:04     ` Tony Battersby
2025-09-08 19:09 ` [PATCH 13/15] scsi: qla2xxx: improve cmd logging Tony Battersby
2025-09-08 19:10 ` [PATCH 14/15] scsi: qla2xxx: add back SRR support Tony Battersby
2025-09-08 19:11   ` [SCST PATCH " Tony Battersby
2025-09-25 12:49   ` [PATCH " Xose Vazquez Perez
2025-09-25 15:30     ` Xose Vazquez Perez
2025-09-25 16:04       ` Tony Battersby
2025-09-25 17:00         ` Tony Battersby
2025-09-25 19:30           ` Tony Battersby
2025-09-08 19:13 ` [PATCH 15/15] scsi: qla2xxx: improve safety of cmd lookup by handle Tony Battersby
2025-09-08 19:14 ` [SCST PATCH] qla2x00t-32gbit: add on_abort_cmd callback Tony Battersby

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=bee30703-6f32-483e-bad6-a3fc7e52b477@cybernetics.com \
    --to=tonyb@cybernetics.com \
    --cc=GR-QLogic-Storage-Upstream@marvell.com \
    --cc=James.Bottomley@HansenPartnership.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-scsi@vger.kernel.org \
    --cc=martin.petersen@oracle.com \
    --cc=njavali@marvell.com \
    --cc=scst-devel@lists.sourceforge.net \
    --cc=target-devel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox