* Re: [Bug 111441] New: iscsi fails to attach to targets
2016-01-28 22:51 [Bug 111441] New: iscsi fails to attach to targets bugzilla-daemon
@ 2016-01-29 1:53 ` Mike Christie
2016-01-29 2:13 ` Mike Christie
2016-01-29 2:55 ` Serguei Bezverkhi (sbezverk)
2016-01-29 3:00 ` [Bug 111441] " bugzilla-daemon
` (18 subsequent siblings)
19 siblings, 2 replies; 46+ messages in thread
From: Mike Christie @ 2016-01-29 1:53 UTC (permalink / raw)
To: bugzilla-daemon, linux-scsi
On 01/28/2016 04:51 PM, bugzilla-daemon@bugzilla.kernel.org wrote:
> https://bugzilla.kernel.org/show_bug.cgi?id=111441
>
> Bug ID: 111441
> Summary: iscsi fails to attach to targets
> Product: IO/Storage
> Version: 2.5
> Kernel Version: 4.4.0-1
> Hardware: x86-64
> OS: Linux
> Tree: Mainline
> Status: NEW
> 4.4.0-1.el7.elrepo.x86_64 #1
I have not seen this oops before. We saw similar ones around 5 or 6
years ago, but they were due to some sysfs or block or scsi issue (I
cannot remember exacty) and fixed there.
Is this a distro kernel or mainline. BZ says mainline, but the kernel
name in bug looks like a red hat related one. Where did you get it?
I do not hit this in 4.4 mainline. Send me your kernel .config, so I can
make sure I have the same options.
^ permalink raw reply [flat|nested] 46+ messages in thread* Re: [Bug 111441] New: iscsi fails to attach to targets
2016-01-29 1:53 ` Mike Christie
@ 2016-01-29 2:13 ` Mike Christie
2016-01-29 2:55 ` Serguei Bezverkhi (sbezverk)
1 sibling, 0 replies; 46+ messages in thread
From: Mike Christie @ 2016-01-29 2:13 UTC (permalink / raw)
To: linux-scsi, sbezverk
I thought you could just reply to kernel bugzilla mails and it would
automatically add your reply to the bz, but I got some errors. Ccing the
bug reporter here, so I do not have to make an account and go through bz.
Serguei see below. I need some extra info.
On 01/28/2016 07:53 PM, Mike Christie wrote:
> On 01/28/2016 04:51 PM, bugzilla-daemon@bugzilla.kernel.org wrote:
>> https://bugzilla.kernel.org/show_bug.cgi?id=111441
>>
>> Bug ID: 111441
>> Summary: iscsi fails to attach to targets
>> Product: IO/Storage
>> Version: 2.5
>> Kernel Version: 4.4.0-1
>> Hardware: x86-64
>> OS: Linux
>> Tree: Mainline
>> Status: NEW
>
>
>> 4.4.0-1.el7.elrepo.x86_64 #1
>
> I have not seen this oops before. We saw similar ones around 5 or 6
> years ago, but they were due to some sysfs or block or scsi issue (I
> cannot remember exacty) and fixed there.
>
> Is this a distro kernel or mainline. BZ says mainline, but the kernel
> name in bug looks like a red hat related one. Where did you get it?
>
> I do not hit this in 4.4 mainline. Send me your kernel .config, so I can
> make sure I have the same options.
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
^ permalink raw reply [flat|nested] 46+ messages in thread
* RE: [Bug 111441] New: iscsi fails to attach to targets
2016-01-29 1:53 ` Mike Christie
2016-01-29 2:13 ` Mike Christie
@ 2016-01-29 2:55 ` Serguei Bezverkhi (sbezverk)
2016-01-29 8:01 ` Michael Christie
1 sibling, 1 reply; 46+ messages in thread
From: Serguei Bezverkhi (sbezverk) @ 2016-01-29 2:55 UTC (permalink / raw)
To: Mike Christie, bugzilla-daemon@bugzilla.kernel.org,
linux-scsi@vger.kernel.org
[-- Attachment #1: Type: text/plain, Size: 2576 bytes --]
HI Mike,
Thank you for looking into this issue.
I reproduced this issue this using both mainline compiled kernel and the one posted by El Repo. I used both of these kernels with RHEL 7.2, both kernels showed exactly the same issue. When I rollback to the original kernel 3.10.0-327.4.4, I do not see the issue.
As per your request attaching kernel config file. Please let me know if you need any additional info or if you want to take a look at the router, I can setup a webex meeting to show you the issue.
Thank you
Serguei
Serguei Bezverkhi,
TECHNICAL LEADER.SERVICES
Global SP Services
sbezverk@cisco.com
Phone: +1 416 306 7312
Mobile: +1 514 234 7374
CCIE (R&S,SP,Sec) - #9527
Cisco.com
Think before you print.
This email may contain confidential and privileged material for the sole use of the intended recipient. Any review, use, distribution or disclosure by others is strictly prohibited. If you are not the intended recipient (or authorized to receive for the recipient), please contact the sender by reply email and delete all copies of this message.
Please click here for Company Registration Information.
-----Original Message-----
From: linux-scsi-owner@vger.kernel.org [mailto:linux-scsi-owner@vger.kernel.org] On Behalf Of Mike Christie
Sent: Thursday, January 28, 2016 8:53 PM
To: bugzilla-daemon@bugzilla.kernel.org; linux-scsi@vger.kernel.org
Subject: Re: [Bug 111441] New: iscsi fails to attach to targets
On 01/28/2016 04:51 PM, bugzilla-daemon@bugzilla.kernel.org wrote:
> https://bugzilla.kernel.org/show_bug.cgi?id=111441
>
> Bug ID: 111441
> Summary: iscsi fails to attach to targets
> Product: IO/Storage
> Version: 2.5
> Kernel Version: 4.4.0-1
> Hardware: x86-64
> OS: Linux
> Tree: Mainline
> Status: NEW
> 4.4.0-1.el7.elrepo.x86_64 #1
I have not seen this oops before. We saw similar ones around 5 or 6 years ago, but they were due to some sysfs or block or scsi issue (I cannot remember exacty) and fixed there.
Is this a distro kernel or mainline. BZ says mainline, but the kernel name in bug looks like a red hat related one. Where did you get it?
I do not hit this in 4.4 mainline. Send me your kernel .config, so I can make sure I have the same options.
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
[-- Attachment #2: config-4.4.0 --]
[-- Type: application/octet-stream, Size: 141993 bytes --]
#
# Automatically generated file; DO NOT EDIT.
# Linux/x86 4.4.0 Kernel Configuration
#
CONFIG_64BIT=y
CONFIG_X86_64=y
CONFIG_X86=y
CONFIG_INSTRUCTION_DECODER=y
CONFIG_PERF_EVENTS_INTEL_UNCORE=y
CONFIG_OUTPUT_FORMAT="elf64-x86-64"
CONFIG_ARCH_DEFCONFIG="arch/x86/configs/x86_64_defconfig"
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_MMU=y
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_NEED_SG_DMA_LENGTH=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_ARCH_HAS_CPU_RELAX=y
CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ARCH_WANT_HUGE_PMD_SHARE=y
CONFIG_ARCH_WANT_GENERAL_HUGETLB=y
CONFIG_ZONE_DMA32=y
CONFIG_AUDIT_ARCH=y
CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_HAVE_INTEL_TXT=y
CONFIG_X86_64_SMP=y
CONFIG_ARCH_HWEIGHT_CFLAGS="-fcall-saved-rdi -fcall-saved-rsi -fcall-saved-rdx -fcall-saved-rcx -fcall-saved-r8 -fcall-saved-r9 -fcall-saved-r10 -fcall-saved-r11"
CONFIG_ARCH_SUPPORTS_UPROBES=y
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_PGTABLE_LEVELS=4
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_IRQ_WORK=y
CONFIG_BUILDTIME_EXTABLE_SORT=y
#
# General setup
#
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_CROSS_COMPILE=""
# CONFIG_COMPILE_TEST is not set
CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_BZIP2=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_HAVE_KERNEL_XZ=y
CONFIG_HAVE_KERNEL_LZO=y
CONFIG_HAVE_KERNEL_LZ4=y
CONFIG_KERNEL_GZIP=y
# CONFIG_KERNEL_BZIP2 is not set
# CONFIG_KERNEL_LZMA is not set
# CONFIG_KERNEL_XZ is not set
# CONFIG_KERNEL_LZO is not set
# CONFIG_KERNEL_LZ4 is not set
CONFIG_DEFAULT_HOSTNAME="(none)"
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_CROSS_MEMORY_ATTACH=y
CONFIG_FHANDLE=y
CONFIG_USELIB=y
CONFIG_AUDIT=y
CONFIG_HAVE_ARCH_AUDITSYSCALL=y
CONFIG_AUDITSYSCALL=y
CONFIG_AUDIT_WATCH=y
CONFIG_AUDIT_TREE=y
#
# IRQ subsystem
#
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_PENDING_IRQ=y
CONFIG_IRQ_DOMAIN=y
CONFIG_IRQ_DOMAIN_HIERARCHY=y
CONFIG_GENERIC_MSI_IRQ=y
CONFIG_GENERIC_MSI_IRQ_DOMAIN=y
# CONFIG_IRQ_DOMAIN_DEBUG is not set
CONFIG_IRQ_FORCED_THREADING=y
CONFIG_SPARSE_IRQ=y
CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_ARCH_CLOCKSOURCE_DATA=y
CONFIG_CLOCKSOURCE_VALIDATE_LAST_CYCLE=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_GENERIC_CLOCKEVENTS_MIN_ADJUST=y
CONFIG_GENERIC_CMOS_UPDATE=y
#
# Timers subsystem
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ_COMMON=y
# CONFIG_HZ_PERIODIC is not set
# CONFIG_NO_HZ_IDLE is not set
CONFIG_NO_HZ_FULL=y
# CONFIG_NO_HZ_FULL_ALL is not set
# CONFIG_NO_HZ_FULL_SYSIDLE is not set
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
#
# CPU/Task time and stats accounting
#
CONFIG_VIRT_CPU_ACCOUNTING=y
CONFIG_VIRT_CPU_ACCOUNTING_GEN=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
CONFIG_TASKSTATS=y
CONFIG_TASK_DELAY_ACCT=y
CONFIG_TASK_XACCT=y
CONFIG_TASK_IO_ACCOUNTING=y
#
# RCU Subsystem
#
CONFIG_TREE_RCU=y
# CONFIG_RCU_EXPERT is not set
CONFIG_SRCU=y
# CONFIG_TASKS_RCU is not set
CONFIG_RCU_STALL_COMMON=y
CONFIG_CONTEXT_TRACKING=y
# CONFIG_CONTEXT_TRACKING_FORCE is not set
# CONFIG_TREE_RCU_TRACE is not set
CONFIG_RCU_NOCB_CPU=y
# CONFIG_RCU_NOCB_CPU_NONE is not set
# CONFIG_RCU_NOCB_CPU_ZERO is not set
CONFIG_RCU_NOCB_CPU_ALL=y
# CONFIG_RCU_EXPEDITE_BOOT is not set
CONFIG_BUILD_BIN2C=y
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=20
CONFIG_LOG_CPU_MAX_BUF_SHIFT=12
CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
CONFIG_ARCH_SUPPORTS_NUMA_BALANCING=y
CONFIG_ARCH_WANT_BATCHED_UNMAP_TLB_FLUSH=y
CONFIG_ARCH_SUPPORTS_INT128=y
CONFIG_NUMA_BALANCING=y
CONFIG_NUMA_BALANCING_DEFAULT_ENABLED=y
CONFIG_CGROUPS=y
# CONFIG_CGROUP_DEBUG is not set
CONFIG_CGROUP_FREEZER=y
# CONFIG_CGROUP_PIDS is not set
CONFIG_CGROUP_DEVICE=y
CONFIG_CPUSETS=y
CONFIG_PROC_PID_CPUSET=y
CONFIG_CGROUP_CPUACCT=y
CONFIG_PAGE_COUNTER=y
CONFIG_MEMCG=y
CONFIG_MEMCG_SWAP=y
CONFIG_MEMCG_SWAP_ENABLED=y
CONFIG_MEMCG_KMEM=y
CONFIG_CGROUP_HUGETLB=y
CONFIG_CGROUP_PERF=y
CONFIG_CGROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
CONFIG_CFS_BANDWIDTH=y
CONFIG_RT_GROUP_SCHED=y
CONFIG_BLK_CGROUP=y
# CONFIG_DEBUG_BLK_CGROUP is not set
CONFIG_CGROUP_WRITEBACK=y
# CONFIG_CHECKPOINT_RESTORE is not set
CONFIG_NAMESPACES=y
CONFIG_UTS_NS=y
CONFIG_IPC_NS=y
CONFIG_USER_NS=y
CONFIG_PID_NS=y
CONFIG_NET_NS=y
CONFIG_SCHED_AUTOGROUP=y
# CONFIG_SYSFS_DEPRECATED is not set
CONFIG_RELAY=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_RD_GZIP=y
CONFIG_RD_BZIP2=y
CONFIG_RD_LZMA=y
CONFIG_RD_XZ=y
CONFIG_RD_LZO=y
CONFIG_RD_LZ4=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
CONFIG_HAVE_UID16=y
CONFIG_SYSCTL_EXCEPTION_TRACE=y
CONFIG_HAVE_PCSPKR_PLATFORM=y
CONFIG_BPF=y
# CONFIG_EXPERT is not set
CONFIG_UID16=y
CONFIG_MULTIUSER=y
CONFIG_SGETMASK_SYSCALL=y
CONFIG_SYSFS_SYSCALL=y
# CONFIG_SYSCTL_SYSCALL is not set
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_PCSPKR_PLATFORM=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
# CONFIG_BPF_SYSCALL is not set
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_ADVISE_SYSCALLS=y
CONFIG_USERFAULTFD=y
CONFIG_PCI_QUIRKS=y
CONFIG_MEMBARRIER=y
# CONFIG_EMBEDDED is not set
CONFIG_HAVE_PERF_EVENTS=y
#
# Kernel Performance Events And Counters
#
CONFIG_PERF_EVENTS=y
# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLUB_DEBUG=y
# CONFIG_COMPAT_BRK is not set
# CONFIG_SLAB is not set
CONFIG_SLUB=y
CONFIG_SLUB_CPU_PARTIAL=y
CONFIG_SYSTEM_DATA_VERIFICATION=y
CONFIG_PROFILING=y
CONFIG_TRACEPOINTS=y
CONFIG_KEXEC_CORE=y
CONFIG_OPROFILE=m
CONFIG_OPROFILE_EVENT_MULTIPLEX=y
CONFIG_HAVE_OPROFILE=y
CONFIG_OPROFILE_NMI_TIMER=y
CONFIG_KPROBES=y
CONFIG_JUMP_LABEL=y
# CONFIG_STATIC_KEYS_SELFTEST is not set
CONFIG_OPTPROBES=y
CONFIG_KPROBES_ON_FTRACE=y
CONFIG_UPROBES=y
# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_ARCH_USE_BUILTIN_BSWAP=y
CONFIG_KRETPROBES=y
CONFIG_USER_RETURN_NOTIFIER=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_OPTPROBES=y
CONFIG_HAVE_KPROBES_ON_FTRACE=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_ATTRS=y
CONFIG_HAVE_DMA_CONTIGUOUS=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
CONFIG_ARCH_WANTS_DYNAMIC_TASK_STRUCT=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_DMA_API_DEBUG=y
CONFIG_HAVE_HW_BREAKPOINT=y
CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y
CONFIG_HAVE_USER_RETURN_NOTIFIER=y
CONFIG_HAVE_PERF_EVENTS_NMI=y
CONFIG_HAVE_PERF_REGS=y
CONFIG_HAVE_PERF_USER_STACK_DUMP=y
CONFIG_HAVE_ARCH_JUMP_LABEL=y
CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y
CONFIG_HAVE_ALIGNED_STRUCT_PAGE=y
CONFIG_HAVE_CMPXCHG_LOCAL=y
CONFIG_HAVE_CMPXCHG_DOUBLE=y
CONFIG_ARCH_WANT_COMPAT_IPC_PARSE_VERSION=y
CONFIG_ARCH_WANT_OLD_COMPAT_IPC=y
CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
CONFIG_SECCOMP_FILTER=y
CONFIG_HAVE_CC_STACKPROTECTOR=y
CONFIG_CC_STACKPROTECTOR=y
# CONFIG_CC_STACKPROTECTOR_NONE is not set
# CONFIG_CC_STACKPROTECTOR_REGULAR is not set
CONFIG_CC_STACKPROTECTOR_STRONG=y
CONFIG_HAVE_CONTEXT_TRACKING=y
CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=y
CONFIG_HAVE_ARCH_HUGE_VMAP=y
CONFIG_HAVE_ARCH_SOFT_DIRTY=y
CONFIG_MODULES_USE_ELF_RELA=y
CONFIG_HAVE_IRQ_EXIT_ON_IRQ_STACK=y
CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
CONFIG_HAVE_COPY_THREAD_TLS=y
CONFIG_OLD_SIGSUSPEND3=y
CONFIG_COMPAT_OLD_SIGACTION=y
#
# GCOV-based kernel profiling
#
# CONFIG_GCOV_KERNEL is not set
CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
CONFIG_MODULE_FORCE_LOAD=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
CONFIG_MODVERSIONS=y
CONFIG_MODULE_SRCVERSION_ALL=y
CONFIG_MODULE_SIG=y
# CONFIG_MODULE_SIG_FORCE is not set
CONFIG_MODULE_SIG_ALL=y
# CONFIG_MODULE_SIG_SHA1 is not set
# CONFIG_MODULE_SIG_SHA224 is not set
CONFIG_MODULE_SIG_SHA256=y
# CONFIG_MODULE_SIG_SHA384 is not set
# CONFIG_MODULE_SIG_SHA512 is not set
CONFIG_MODULE_SIG_HASH="sha256"
# CONFIG_MODULE_COMPRESS is not set
CONFIG_MODULES_TREE_LOOKUP=y
CONFIG_BLOCK=y
CONFIG_BLK_DEV_BSG=y
CONFIG_BLK_DEV_BSGLIB=y
CONFIG_BLK_DEV_INTEGRITY=y
CONFIG_BLK_DEV_THROTTLING=y
# CONFIG_BLK_CMDLINE_PARSER is not set
#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
# CONFIG_AIX_PARTITION is not set
CONFIG_OSF_PARTITION=y
CONFIG_AMIGA_PARTITION=y
# CONFIG_ATARI_PARTITION is not set
CONFIG_MAC_PARTITION=y
CONFIG_MSDOS_PARTITION=y
CONFIG_BSD_DISKLABEL=y
CONFIG_MINIX_SUBPARTITION=y
CONFIG_SOLARIS_X86_PARTITION=y
CONFIG_UNIXWARE_DISKLABEL=y
# CONFIG_LDM_PARTITION is not set
CONFIG_SGI_PARTITION=y
# CONFIG_ULTRIX_PARTITION is not set
CONFIG_SUN_PARTITION=y
CONFIG_KARMA_PARTITION=y
CONFIG_EFI_PARTITION=y
# CONFIG_SYSV68_PARTITION is not set
# CONFIG_CMDLINE_PARTITION is not set
CONFIG_BLOCK_COMPAT=y
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
CONFIG_CFQ_GROUP_IOSCHED=y
CONFIG_DEFAULT_DEADLINE=y
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="deadline"
CONFIG_PREEMPT_NOTIFIERS=y
CONFIG_PADATA=y
CONFIG_ASN1=y
CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
CONFIG_INLINE_READ_UNLOCK=y
CONFIG_INLINE_READ_UNLOCK_IRQ=y
CONFIG_INLINE_WRITE_UNLOCK=y
CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
CONFIG_MUTEX_SPIN_ON_OWNER=y
CONFIG_RWSEM_SPIN_ON_OWNER=y
CONFIG_LOCK_SPIN_ON_OWNER=y
CONFIG_ARCH_USE_QUEUED_SPINLOCKS=y
CONFIG_QUEUED_SPINLOCKS=y
CONFIG_ARCH_USE_QUEUED_RWLOCKS=y
CONFIG_QUEUED_RWLOCKS=y
CONFIG_FREEZER=y
#
# Processor type and features
#
CONFIG_ZONE_DMA=y
CONFIG_SMP=y
CONFIG_X86_FEATURE_NAMES=y
CONFIG_X86_X2APIC=y
CONFIG_X86_MPPARSE=y
CONFIG_X86_EXTENDED_PLATFORM=y
# CONFIG_X86_NUMACHIP is not set
# CONFIG_X86_VSMP is not set
CONFIG_X86_UV=y
# CONFIG_X86_GOLDFISH is not set
CONFIG_X86_INTEL_LPSS=y
# CONFIG_X86_AMD_PLATFORM_DEVICE is not set
# CONFIG_IOSF_MBI is not set
CONFIG_X86_SUPPORTS_MEMORY_FAILURE=y
CONFIG_SCHED_OMIT_FRAME_POINTER=y
CONFIG_HYPERVISOR_GUEST=y
CONFIG_PARAVIRT=y
# CONFIG_PARAVIRT_DEBUG is not set
CONFIG_PARAVIRT_SPINLOCKS=y
CONFIG_XEN=y
CONFIG_XEN_DOM0=y
CONFIG_XEN_PVHVM=y
CONFIG_XEN_512GB=y
CONFIG_XEN_SAVE_RESTORE=y
# CONFIG_XEN_DEBUG_FS is not set
# CONFIG_XEN_PVH is not set
CONFIG_KVM_GUEST=y
# CONFIG_KVM_DEBUG_FS is not set
CONFIG_PARAVIRT_TIME_ACCOUNTING=y
CONFIG_PARAVIRT_CLOCK=y
CONFIG_NO_BOOTMEM=y
# CONFIG_MK8 is not set
# CONFIG_MPSC is not set
# CONFIG_MCORE2 is not set
# CONFIG_MATOM is not set
CONFIG_GENERIC_CPU=y
CONFIG_X86_INTERNODE_CACHE_SHIFT=6
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_X86_TSC=y
CONFIG_X86_CMPXCHG64=y
CONFIG_X86_CMOV=y
CONFIG_X86_MINIMUM_CPU_FAMILY=64
CONFIG_X86_DEBUGCTLMSR=y
CONFIG_CPU_SUP_INTEL=y
CONFIG_CPU_SUP_AMD=y
CONFIG_CPU_SUP_CENTAUR=y
CONFIG_HPET_TIMER=y
CONFIG_HPET_EMULATE_RTC=y
CONFIG_DMI=y
CONFIG_GART_IOMMU=y
# CONFIG_CALGARY_IOMMU is not set
CONFIG_SWIOTLB=y
CONFIG_IOMMU_HELPER=y
CONFIG_MAXSMP=y
CONFIG_NR_CPUS=8192
CONFIG_SCHED_SMT=y
CONFIG_SCHED_MC=y
# CONFIG_PREEMPT_NONE is not set
CONFIG_PREEMPT_VOLUNTARY=y
# CONFIG_PREEMPT is not set
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS=y
CONFIG_X86_MCE=y
CONFIG_X86_MCE_INTEL=y
CONFIG_X86_MCE_AMD=y
CONFIG_X86_MCE_THRESHOLD=y
CONFIG_X86_MCE_INJECT=m
CONFIG_X86_THERMAL_VECTOR=y
# CONFIG_VM86 is not set
CONFIG_X86_16BIT=y
CONFIG_X86_ESPFIX64=y
CONFIG_X86_VSYSCALL_EMULATION=y
CONFIG_I8K=m
CONFIG_MICROCODE=y
CONFIG_MICROCODE_INTEL=y
CONFIG_MICROCODE_AMD=y
CONFIG_MICROCODE_OLD_INTERFACE=y
CONFIG_X86_MSR=y
CONFIG_X86_CPUID=y
CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
CONFIG_ARCH_DMA_ADDR_T_64BIT=y
CONFIG_X86_DIRECT_GBPAGES=y
CONFIG_NUMA=y
CONFIG_AMD_NUMA=y
CONFIG_X86_64_ACPI_NUMA=y
CONFIG_NODES_SPAN_OTHER_NODES=y
# CONFIG_NUMA_EMU is not set
CONFIG_NODES_SHIFT=10
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_DEFAULT=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ARCH_MEMORY_PROBE=y
CONFIG_ARCH_PROC_KCORE_TEXT=y
CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_SPARSEMEM_MANUAL=y
CONFIG_SPARSEMEM=y
CONFIG_NEED_MULTIPLE_NODES=y
CONFIG_HAVE_MEMORY_PRESENT=y
CONFIG_SPARSEMEM_EXTREME=y
CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
CONFIG_SPARSEMEM_ALLOC_MEM_MAP_TOGETHER=y
CONFIG_SPARSEMEM_VMEMMAP=y
CONFIG_HAVE_MEMBLOCK=y
CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
CONFIG_ARCH_DISCARD_MEMBLOCK=y
CONFIG_MEMORY_ISOLATION=y
CONFIG_MOVABLE_NODE=y
CONFIG_HAVE_BOOTMEM_INFO_NODE=y
CONFIG_MEMORY_HOTPLUG=y
CONFIG_MEMORY_HOTPLUG_SPARSE=y
CONFIG_MEMORY_HOTREMOVE=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_ARCH_ENABLE_SPLIT_PMD_PTLOCK=y
CONFIG_MEMORY_BALLOON=y
CONFIG_BALLOON_COMPACTION=y
CONFIG_COMPACTION=y
CONFIG_MIGRATION=y
CONFIG_ARCH_ENABLE_HUGEPAGE_MIGRATION=y
CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_MMU_NOTIFIER=y
CONFIG_KSM=y
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=y
CONFIG_MEMORY_FAILURE=y
CONFIG_HWPOISON_INJECT=m
CONFIG_TRANSPARENT_HUGEPAGE=y
CONFIG_TRANSPARENT_HUGEPAGE_ALWAYS=y
# CONFIG_TRANSPARENT_HUGEPAGE_MADVISE is not set
CONFIG_CLEANCACHE=y
CONFIG_FRONTSWAP=y
CONFIG_CMA=y
# CONFIG_CMA_DEBUG is not set
# CONFIG_CMA_DEBUGFS is not set
CONFIG_CMA_AREAS=7
CONFIG_ZSWAP=y
CONFIG_ZPOOL=y
CONFIG_ZBUD=y
CONFIG_ZSMALLOC=y
# CONFIG_PGTABLE_MAPPING is not set
# CONFIG_ZSMALLOC_STAT is not set
CONFIG_GENERIC_EARLY_IOREMAP=y
CONFIG_ARCH_SUPPORTS_DEFERRED_STRUCT_PAGE_INIT=y
# CONFIG_DEFERRED_STRUCT_PAGE_INIT is not set
# CONFIG_IDLE_PAGE_TRACKING is not set
CONFIG_FRAME_VECTOR=y
# CONFIG_X86_PMEM_LEGACY is not set
CONFIG_X86_CHECK_BIOS_CORRUPTION=y
# CONFIG_X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK is not set
CONFIG_X86_RESERVE_LOW=64
CONFIG_MTRR=y
CONFIG_MTRR_SANITIZER=y
CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=1
CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1
CONFIG_X86_PAT=y
CONFIG_ARCH_USES_PG_UNCACHED=y
CONFIG_ARCH_RANDOM=y
CONFIG_X86_SMAP=y
# CONFIG_X86_INTEL_MPX is not set
CONFIG_EFI=y
CONFIG_EFI_STUB=y
# CONFIG_EFI_MIXED is not set
CONFIG_SECCOMP=y
# CONFIG_HZ_100 is not set
# CONFIG_HZ_250 is not set
# CONFIG_HZ_300 is not set
CONFIG_HZ_1000=y
CONFIG_HZ=1000
CONFIG_SCHED_HRTICK=y
CONFIG_KEXEC=y
CONFIG_KEXEC_FILE=y
CONFIG_KEXEC_VERIFY_SIG=y
CONFIG_KEXEC_BZIMAGE_VERIFY_SIG=y
CONFIG_CRASH_DUMP=y
CONFIG_KEXEC_JUMP=y
CONFIG_PHYSICAL_START=0x1000000
CONFIG_RELOCATABLE=y
# CONFIG_RANDOMIZE_BASE is not set
CONFIG_PHYSICAL_ALIGN=0x1000000
CONFIG_HOTPLUG_CPU=y
CONFIG_BOOTPARAM_HOTPLUG_CPU0=y
# CONFIG_DEBUG_HOTPLUG_CPU0 is not set
# CONFIG_COMPAT_VDSO is not set
# CONFIG_LEGACY_VSYSCALL_NATIVE is not set
CONFIG_LEGACY_VSYSCALL_EMULATE=y
# CONFIG_LEGACY_VSYSCALL_NONE is not set
# CONFIG_CMDLINE_BOOL is not set
CONFIG_MODIFY_LDT_SYSCALL=y
CONFIG_HAVE_LIVEPATCH=y
# CONFIG_LIVEPATCH is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
CONFIG_USE_PERCPU_NUMA_NODE_ID=y
#
# Power management and ACPI options
#
CONFIG_ARCH_HIBERNATION_HEADER=y
CONFIG_SUSPEND=y
CONFIG_SUSPEND_FREEZER=y
CONFIG_HIBERNATE_CALLBACKS=y
CONFIG_HIBERNATION=y
CONFIG_PM_STD_PARTITION=""
CONFIG_PM_SLEEP=y
CONFIG_PM_SLEEP_SMP=y
# CONFIG_PM_AUTOSLEEP is not set
# CONFIG_PM_WAKELOCKS is not set
CONFIG_PM=y
# CONFIG_PM_DEBUG is not set
CONFIG_PM_CLK=y
# CONFIG_WQ_POWER_EFFICIENT_DEFAULT is not set
CONFIG_ACPI=y
CONFIG_ACPI_LEGACY_TABLES_LOOKUP=y
CONFIG_ARCH_MIGHT_HAVE_ACPI_PDC=y
CONFIG_ACPI_SYSTEM_POWER_STATES_SUPPORT=y
# CONFIG_ACPI_DEBUGGER is not set
CONFIG_ACPI_SLEEP=y
# CONFIG_ACPI_PROCFS_POWER is not set
CONFIG_ACPI_REV_OVERRIDE_POSSIBLE=y
CONFIG_ACPI_EC_DEBUGFS=m
CONFIG_ACPI_AC=y
CONFIG_ACPI_BATTERY=y
CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_VIDEO=m
CONFIG_ACPI_FAN=y
CONFIG_ACPI_DOCK=y
CONFIG_ACPI_CPU_FREQ_PSS=y
CONFIG_ACPI_PROCESSOR_IDLE=y
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_IPMI=m
CONFIG_ACPI_HOTPLUG_CPU=y
CONFIG_ACPI_PROCESSOR_AGGREGATOR=m
CONFIG_ACPI_THERMAL=y
CONFIG_ACPI_NUMA=y
# CONFIG_ACPI_CUSTOM_DSDT is not set
CONFIG_ACPI_INITRD_TABLE_OVERRIDE=y
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_PCI_SLOT=y
CONFIG_X86_PM_TIMER=y
CONFIG_ACPI_CONTAINER=y
CONFIG_ACPI_HOTPLUG_MEMORY=y
CONFIG_ACPI_HOTPLUG_IOAPIC=y
CONFIG_ACPI_SBS=m
CONFIG_ACPI_HED=y
CONFIG_ACPI_CUSTOM_METHOD=m
CONFIG_ACPI_BGRT=y
# CONFIG_ACPI_REDUCED_HARDWARE_ONLY is not set
# CONFIG_ACPI_NFIT is not set
CONFIG_HAVE_ACPI_APEI=y
CONFIG_HAVE_ACPI_APEI_NMI=y
CONFIG_ACPI_APEI=y
CONFIG_ACPI_APEI_GHES=y
CONFIG_ACPI_APEI_PCIEAER=y
CONFIG_ACPI_APEI_MEMORY_FAILURE=y
CONFIG_ACPI_APEI_EINJ=m
# CONFIG_ACPI_APEI_ERST_DEBUG is not set
CONFIG_ACPI_EXTLOG=m
# CONFIG_PMIC_OPREGION is not set
CONFIG_SFI=y
#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_GOV_COMMON=y
CONFIG_CPU_FREQ_STAT=m
CONFIG_CPU_FREQ_STAT_DETAILS=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=y
CONFIG_CPU_FREQ_GOV_USERSPACE=y
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
#
# CPU frequency scaling drivers
#
CONFIG_X86_INTEL_PSTATE=y
CONFIG_X86_PCC_CPUFREQ=m
CONFIG_X86_ACPI_CPUFREQ=m
CONFIG_X86_ACPI_CPUFREQ_CPB=y
CONFIG_X86_POWERNOW_K8=m
CONFIG_X86_AMD_FREQ_SENSITIVITY=m
# CONFIG_X86_SPEEDSTEP_CENTRINO is not set
CONFIG_X86_P4_CLOCKMOD=m
#
# shared options
#
CONFIG_X86_SPEEDSTEP_LIB=m
#
# CPU Idle
#
CONFIG_CPU_IDLE=y
# CONFIG_CPU_IDLE_GOV_LADDER is not set
CONFIG_CPU_IDLE_GOV_MENU=y
# CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED is not set
CONFIG_INTEL_IDLE=y
#
# Memory power savings
#
CONFIG_I7300_IDLE_IOAT_CHANNEL=y
CONFIG_I7300_IDLE=m
#
# Bus options (PCI etc.)
#
CONFIG_PCI=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
CONFIG_PCI_XEN=y
CONFIG_PCI_DOMAINS=y
CONFIG_PCIEPORTBUS=y
CONFIG_HOTPLUG_PCI_PCIE=y
CONFIG_PCIEAER=y
CONFIG_PCIE_ECRC=y
CONFIG_PCIEAER_INJECT=m
CONFIG_PCIEASPM=y
# CONFIG_PCIEASPM_DEBUG is not set
CONFIG_PCIEASPM_DEFAULT=y
# CONFIG_PCIEASPM_POWERSAVE is not set
# CONFIG_PCIEASPM_PERFORMANCE is not set
CONFIG_PCIE_PME=y
CONFIG_PCI_BUS_ADDR_T_64BIT=y
CONFIG_PCI_MSI=y
CONFIG_PCI_MSI_IRQ_DOMAIN=y
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_REALLOC_ENABLE_AUTO is not set
CONFIG_PCI_STUB=y
# CONFIG_XEN_PCIDEV_FRONTEND is not set
CONFIG_HT_IRQ=y
CONFIG_PCI_ATS=y
CONFIG_PCI_IOV=y
CONFIG_PCI_PRI=y
CONFIG_PCI_PASID=y
CONFIG_PCI_LABEL=y
#
# PCI host controller drivers
#
CONFIG_ISA_DMA_API=y
CONFIG_AMD_NB=y
CONFIG_PCCARD=y
# CONFIG_PCMCIA is not set
CONFIG_CARDBUS=y
#
# PC-card bridges
#
CONFIG_YENTA=m
CONFIG_YENTA_O2=y
CONFIG_YENTA_RICOH=y
CONFIG_YENTA_TI=y
CONFIG_YENTA_ENE_TUNE=y
CONFIG_YENTA_TOSHIBA=y
CONFIG_HOTPLUG_PCI=y
CONFIG_HOTPLUG_PCI_ACPI=y
CONFIG_HOTPLUG_PCI_ACPI_IBM=m
# CONFIG_HOTPLUG_PCI_CPCI is not set
CONFIG_HOTPLUG_PCI_SHPC=m
# CONFIG_RAPIDIO is not set
# CONFIG_X86_SYSFB is not set
#
# Executable file formats / Emulations
#
CONFIG_BINFMT_ELF=y
CONFIG_COMPAT_BINFMT_ELF=y
CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
CONFIG_BINFMT_SCRIPT=y
# CONFIG_HAVE_AOUT is not set
CONFIG_BINFMT_MISC=m
CONFIG_COREDUMP=y
CONFIG_IA32_EMULATION=y
# CONFIG_IA32_AOUT is not set
# CONFIG_X86_X32 is not set
CONFIG_COMPAT=y
CONFIG_COMPAT_FOR_U64_ALIGNMENT=y
CONFIG_SYSVIPC_COMPAT=y
CONFIG_KEYS_COMPAT=y
CONFIG_X86_DEV_DMA_OPS=y
CONFIG_PMC_ATOM=y
CONFIG_NET=y
CONFIG_COMPAT_NETLINK_MESSAGES=y
CONFIG_NET_INGRESS=y
#
# Networking options
#
CONFIG_PACKET=y
CONFIG_PACKET_DIAG=m
CONFIG_UNIX=y
CONFIG_UNIX_DIAG=m
CONFIG_XFRM=y
CONFIG_XFRM_ALGO=y
CONFIG_XFRM_USER=y
CONFIG_XFRM_SUB_POLICY=y
CONFIG_XFRM_MIGRATE=y
CONFIG_XFRM_STATISTICS=y
CONFIG_XFRM_IPCOMP=m
CONFIG_NET_KEY=m
CONFIG_NET_KEY_MIGRATE=y
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_IP_FIB_TRIE_STATS=y
CONFIG_IP_MULTIPLE_TABLES=y
CONFIG_IP_ROUTE_MULTIPATH=y
CONFIG_IP_ROUTE_VERBOSE=y
CONFIG_IP_ROUTE_CLASSID=y
# CONFIG_IP_PNP is not set
CONFIG_NET_IPIP=m
CONFIG_NET_IPGRE_DEMUX=m
CONFIG_NET_IP_TUNNEL=m
CONFIG_NET_IPGRE=m
CONFIG_NET_IPGRE_BROADCAST=y
CONFIG_IP_MROUTE=y
CONFIG_IP_MROUTE_MULTIPLE_TABLES=y
CONFIG_IP_PIMSM_V1=y
CONFIG_IP_PIMSM_V2=y
CONFIG_SYN_COOKIES=y
CONFIG_NET_IPVTI=m
CONFIG_NET_UDP_TUNNEL=m
# CONFIG_NET_FOU is not set
# CONFIG_NET_FOU_IP_TUNNELS is not set
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
CONFIG_INET_XFRM_TUNNEL=m
CONFIG_INET_TUNNEL=m
CONFIG_INET_XFRM_MODE_TRANSPORT=m
CONFIG_INET_XFRM_MODE_TUNNEL=m
CONFIG_INET_XFRM_MODE_BEET=m
CONFIG_INET_LRO=y
CONFIG_INET_DIAG=m
CONFIG_INET_TCP_DIAG=m
CONFIG_INET_UDP_DIAG=m
CONFIG_TCP_CONG_ADVANCED=y
CONFIG_TCP_CONG_BIC=m
CONFIG_TCP_CONG_CUBIC=y
CONFIG_TCP_CONG_WESTWOOD=m
CONFIG_TCP_CONG_HTCP=m
CONFIG_TCP_CONG_HSTCP=m
CONFIG_TCP_CONG_HYBLA=m
CONFIG_TCP_CONG_VEGAS=m
CONFIG_TCP_CONG_SCALABLE=m
CONFIG_TCP_CONG_LP=m
CONFIG_TCP_CONG_VENO=m
CONFIG_TCP_CONG_YEAH=m
CONFIG_TCP_CONG_ILLINOIS=m
CONFIG_TCP_CONG_DCTCP=m
# CONFIG_TCP_CONG_CDG is not set
CONFIG_DEFAULT_CUBIC=y
# CONFIG_DEFAULT_RENO is not set
CONFIG_DEFAULT_TCP_CONG="cubic"
CONFIG_TCP_MD5SIG=y
CONFIG_IPV6=y
CONFIG_IPV6_ROUTER_PREF=y
CONFIG_IPV6_ROUTE_INFO=y
CONFIG_IPV6_OPTIMISTIC_DAD=y
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
CONFIG_IPV6_MIP6=m
# CONFIG_IPV6_ILA is not set
CONFIG_INET6_XFRM_TUNNEL=m
CONFIG_INET6_TUNNEL=m
CONFIG_INET6_XFRM_MODE_TRANSPORT=m
CONFIG_INET6_XFRM_MODE_TUNNEL=m
CONFIG_INET6_XFRM_MODE_BEET=m
CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
CONFIG_IPV6_VTI=m
CONFIG_IPV6_SIT=m
CONFIG_IPV6_SIT_6RD=y
CONFIG_IPV6_NDISC_NODETYPE=y
CONFIG_IPV6_TUNNEL=m
CONFIG_IPV6_GRE=m
CONFIG_IPV6_MULTIPLE_TABLES=y
# CONFIG_IPV6_SUBTREES is not set
CONFIG_IPV6_MROUTE=y
CONFIG_IPV6_MROUTE_MULTIPLE_TABLES=y
CONFIG_IPV6_PIMSM_V2=y
CONFIG_NETLABEL=y
CONFIG_NETWORK_SECMARK=y
CONFIG_NET_PTP_CLASSIFY=y
CONFIG_NETWORK_PHY_TIMESTAMPING=y
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
CONFIG_NETFILTER_ADVANCED=y
CONFIG_BRIDGE_NETFILTER=m
#
# Core Netfilter Configuration
#
CONFIG_NETFILTER_INGRESS=y
CONFIG_NETFILTER_NETLINK=m
CONFIG_NETFILTER_NETLINK_ACCT=m
CONFIG_NETFILTER_NETLINK_QUEUE=m
CONFIG_NETFILTER_NETLINK_LOG=m
CONFIG_NF_CONNTRACK=m
CONFIG_NF_LOG_COMMON=m
CONFIG_NF_CONNTRACK_MARK=y
CONFIG_NF_CONNTRACK_SECMARK=y
CONFIG_NF_CONNTRACK_ZONES=y
CONFIG_NF_CONNTRACK_PROCFS=y
CONFIG_NF_CONNTRACK_EVENTS=y
# CONFIG_NF_CONNTRACK_TIMEOUT is not set
CONFIG_NF_CONNTRACK_TIMESTAMP=y
CONFIG_NF_CONNTRACK_LABELS=y
CONFIG_NF_CT_PROTO_DCCP=m
CONFIG_NF_CT_PROTO_GRE=m
CONFIG_NF_CT_PROTO_SCTP=m
CONFIG_NF_CT_PROTO_UDPLITE=m
CONFIG_NF_CONNTRACK_AMANDA=m
CONFIG_NF_CONNTRACK_FTP=m
CONFIG_NF_CONNTRACK_H323=m
CONFIG_NF_CONNTRACK_IRC=m
CONFIG_NF_CONNTRACK_BROADCAST=m
CONFIG_NF_CONNTRACK_NETBIOS_NS=m
CONFIG_NF_CONNTRACK_SNMP=m
CONFIG_NF_CONNTRACK_PPTP=m
CONFIG_NF_CONNTRACK_SANE=m
CONFIG_NF_CONNTRACK_SIP=m
CONFIG_NF_CONNTRACK_TFTP=m
CONFIG_NF_CT_NETLINK=m
# CONFIG_NF_CT_NETLINK_TIMEOUT is not set
# CONFIG_NETFILTER_NETLINK_GLUE_CT is not set
CONFIG_NF_NAT=m
CONFIG_NF_NAT_NEEDED=y
CONFIG_NF_NAT_PROTO_DCCP=m
CONFIG_NF_NAT_PROTO_UDPLITE=m
CONFIG_NF_NAT_PROTO_SCTP=m
CONFIG_NF_NAT_AMANDA=m
CONFIG_NF_NAT_FTP=m
CONFIG_NF_NAT_IRC=m
CONFIG_NF_NAT_SIP=m
CONFIG_NF_NAT_TFTP=m
CONFIG_NF_NAT_REDIRECT=m
CONFIG_NETFILTER_SYNPROXY=m
CONFIG_NF_TABLES=m
CONFIG_NF_TABLES_INET=m
# CONFIG_NF_TABLES_NETDEV is not set
CONFIG_NFT_EXTHDR=m
CONFIG_NFT_META=m
CONFIG_NFT_CT=m
CONFIG_NFT_RBTREE=m
CONFIG_NFT_HASH=m
CONFIG_NFT_COUNTER=m
CONFIG_NFT_LOG=m
CONFIG_NFT_LIMIT=m
# CONFIG_NFT_MASQ is not set
# CONFIG_NFT_REDIR is not set
CONFIG_NFT_NAT=m
CONFIG_NFT_QUEUE=m
# CONFIG_NFT_REJECT is not set
# CONFIG_NFT_REJECT_INET is not set
CONFIG_NFT_COMPAT=m
CONFIG_NETFILTER_XTABLES=y
#
# Xtables combined modules
#
CONFIG_NETFILTER_XT_MARK=m
CONFIG_NETFILTER_XT_CONNMARK=m
CONFIG_NETFILTER_XT_SET=m
#
# Xtables targets
#
CONFIG_NETFILTER_XT_TARGET_AUDIT=m
CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m
CONFIG_NETFILTER_XT_TARGET_CT=m
CONFIG_NETFILTER_XT_TARGET_DSCP=m
CONFIG_NETFILTER_XT_TARGET_HL=m
CONFIG_NETFILTER_XT_TARGET_HMARK=m
CONFIG_NETFILTER_XT_TARGET_IDLETIMER=m
CONFIG_NETFILTER_XT_TARGET_LED=m
CONFIG_NETFILTER_XT_TARGET_LOG=m
CONFIG_NETFILTER_XT_TARGET_MARK=m
CONFIG_NETFILTER_XT_NAT=m
CONFIG_NETFILTER_XT_TARGET_NETMAP=m
CONFIG_NETFILTER_XT_TARGET_NFLOG=m
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
CONFIG_NETFILTER_XT_TARGET_RATEEST=m
CONFIG_NETFILTER_XT_TARGET_REDIRECT=m
CONFIG_NETFILTER_XT_TARGET_TEE=m
CONFIG_NETFILTER_XT_TARGET_TPROXY=m
CONFIG_NETFILTER_XT_TARGET_TRACE=m
CONFIG_NETFILTER_XT_TARGET_SECMARK=m
CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
#
# Xtables matches
#
CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=m
CONFIG_NETFILTER_XT_MATCH_BPF=m
CONFIG_NETFILTER_XT_MATCH_CGROUP=m
CONFIG_NETFILTER_XT_MATCH_CLUSTER=m
CONFIG_NETFILTER_XT_MATCH_COMMENT=m
CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
CONFIG_NETFILTER_XT_MATCH_CONNLABEL=m
CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
CONFIG_NETFILTER_XT_MATCH_CPU=m
CONFIG_NETFILTER_XT_MATCH_DCCP=m
CONFIG_NETFILTER_XT_MATCH_DEVGROUP=m
CONFIG_NETFILTER_XT_MATCH_DSCP=m
CONFIG_NETFILTER_XT_MATCH_ECN=m
CONFIG_NETFILTER_XT_MATCH_ESP=m
CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
CONFIG_NETFILTER_XT_MATCH_HELPER=m
CONFIG_NETFILTER_XT_MATCH_HL=m
# CONFIG_NETFILTER_XT_MATCH_IPCOMP is not set
CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
CONFIG_NETFILTER_XT_MATCH_IPVS=m
CONFIG_NETFILTER_XT_MATCH_L2TP=m
CONFIG_NETFILTER_XT_MATCH_LENGTH=m
CONFIG_NETFILTER_XT_MATCH_LIMIT=m
CONFIG_NETFILTER_XT_MATCH_MAC=m
CONFIG_NETFILTER_XT_MATCH_MARK=m
CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
CONFIG_NETFILTER_XT_MATCH_NFACCT=m
CONFIG_NETFILTER_XT_MATCH_OSF=m
CONFIG_NETFILTER_XT_MATCH_OWNER=m
CONFIG_NETFILTER_XT_MATCH_POLICY=m
CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m
CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
CONFIG_NETFILTER_XT_MATCH_QUOTA=m
CONFIG_NETFILTER_XT_MATCH_RATEEST=m
CONFIG_NETFILTER_XT_MATCH_REALM=m
CONFIG_NETFILTER_XT_MATCH_RECENT=m
CONFIG_NETFILTER_XT_MATCH_SCTP=m
CONFIG_NETFILTER_XT_MATCH_SOCKET=m
CONFIG_NETFILTER_XT_MATCH_STATE=m
CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
CONFIG_NETFILTER_XT_MATCH_STRING=m
CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
CONFIG_NETFILTER_XT_MATCH_TIME=m
CONFIG_NETFILTER_XT_MATCH_U32=m
CONFIG_IP_SET=m
CONFIG_IP_SET_MAX=256
CONFIG_IP_SET_BITMAP_IP=m
CONFIG_IP_SET_BITMAP_IPMAC=m
CONFIG_IP_SET_BITMAP_PORT=m
CONFIG_IP_SET_HASH_IP=m
# CONFIG_IP_SET_HASH_IPMARK is not set
CONFIG_IP_SET_HASH_IPPORT=m
CONFIG_IP_SET_HASH_IPPORTIP=m
CONFIG_IP_SET_HASH_IPPORTNET=m
# CONFIG_IP_SET_HASH_MAC is not set
# CONFIG_IP_SET_HASH_NETPORTNET is not set
CONFIG_IP_SET_HASH_NET=m
# CONFIG_IP_SET_HASH_NETNET is not set
CONFIG_IP_SET_HASH_NETPORT=m
CONFIG_IP_SET_HASH_NETIFACE=m
CONFIG_IP_SET_LIST_SET=m
CONFIG_IP_VS=m
CONFIG_IP_VS_IPV6=y
# CONFIG_IP_VS_DEBUG is not set
CONFIG_IP_VS_TAB_BITS=12
#
# IPVS transport protocol load balancing support
#
CONFIG_IP_VS_PROTO_TCP=y
CONFIG_IP_VS_PROTO_UDP=y
CONFIG_IP_VS_PROTO_AH_ESP=y
CONFIG_IP_VS_PROTO_ESP=y
CONFIG_IP_VS_PROTO_AH=y
CONFIG_IP_VS_PROTO_SCTP=y
#
# IPVS scheduler
#
CONFIG_IP_VS_RR=m
CONFIG_IP_VS_WRR=m
CONFIG_IP_VS_LC=m
CONFIG_IP_VS_WLC=m
# CONFIG_IP_VS_FO is not set
# CONFIG_IP_VS_OVF is not set
CONFIG_IP_VS_LBLC=m
CONFIG_IP_VS_LBLCR=m
CONFIG_IP_VS_DH=m
CONFIG_IP_VS_SH=m
CONFIG_IP_VS_SED=m
CONFIG_IP_VS_NQ=m
#
# IPVS SH scheduler
#
CONFIG_IP_VS_SH_TAB_BITS=8
#
# IPVS application helper
#
CONFIG_IP_VS_FTP=m
CONFIG_IP_VS_NFCT=y
CONFIG_IP_VS_PE_SIP=m
#
# IP: Netfilter Configuration
#
CONFIG_NF_DEFRAG_IPV4=m
CONFIG_NF_CONNTRACK_IPV4=m
# CONFIG_NF_CONNTRACK_PROC_COMPAT is not set
CONFIG_NF_TABLES_IPV4=m
CONFIG_NFT_CHAIN_ROUTE_IPV4=m
# CONFIG_NFT_REJECT_IPV4 is not set
# CONFIG_NFT_DUP_IPV4 is not set
# CONFIG_NF_TABLES_ARP is not set
CONFIG_NF_DUP_IPV4=m
# CONFIG_NF_LOG_ARP is not set
CONFIG_NF_LOG_IPV4=m
CONFIG_NF_REJECT_IPV4=m
CONFIG_NF_NAT_IPV4=m
CONFIG_NFT_CHAIN_NAT_IPV4=m
CONFIG_NF_NAT_MASQUERADE_IPV4=m
CONFIG_NF_NAT_SNMP_BASIC=m
CONFIG_NF_NAT_PROTO_GRE=m
CONFIG_NF_NAT_PPTP=m
CONFIG_NF_NAT_H323=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_AH=m
CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_RPFILTER=m
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_SYNPROXY=m
CONFIG_IP_NF_NAT=m
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_NETMAP=m
CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_CLUSTERIP=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_TTL=m
CONFIG_IP_NF_RAW=m
CONFIG_IP_NF_SECURITY=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
#
# IPv6: Netfilter Configuration
#
CONFIG_NF_DEFRAG_IPV6=m
CONFIG_NF_CONNTRACK_IPV6=m
CONFIG_NF_TABLES_IPV6=m
CONFIG_NFT_CHAIN_ROUTE_IPV6=m
# CONFIG_NFT_REJECT_IPV6 is not set
# CONFIG_NFT_DUP_IPV6 is not set
CONFIG_NF_DUP_IPV6=m
CONFIG_NF_REJECT_IPV6=m
CONFIG_NF_LOG_IPV6=m
CONFIG_NF_NAT_IPV6=m
CONFIG_NFT_CHAIN_NAT_IPV6=m
CONFIG_NF_NAT_MASQUERADE_IPV6=m
CONFIG_IP6_NF_IPTABLES=m
CONFIG_IP6_NF_MATCH_AH=m
CONFIG_IP6_NF_MATCH_EUI64=m
CONFIG_IP6_NF_MATCH_FRAG=m
CONFIG_IP6_NF_MATCH_OPTS=m
CONFIG_IP6_NF_MATCH_HL=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
CONFIG_IP6_NF_MATCH_MH=m
CONFIG_IP6_NF_MATCH_RPFILTER=m
CONFIG_IP6_NF_MATCH_RT=m
CONFIG_IP6_NF_TARGET_HL=m
CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_REJECT=m
CONFIG_IP6_NF_TARGET_SYNPROXY=m
CONFIG_IP6_NF_MANGLE=m
CONFIG_IP6_NF_RAW=m
CONFIG_IP6_NF_SECURITY=m
CONFIG_IP6_NF_NAT=m
CONFIG_IP6_NF_TARGET_MASQUERADE=m
# CONFIG_IP6_NF_TARGET_NPT is not set
CONFIG_NF_TABLES_BRIDGE=m
CONFIG_NFT_BRIDGE_META=m
# CONFIG_NF_LOG_BRIDGE is not set
CONFIG_BRIDGE_NF_EBTABLES=m
CONFIG_BRIDGE_EBT_BROUTE=m
CONFIG_BRIDGE_EBT_T_FILTER=m
CONFIG_BRIDGE_EBT_T_NAT=m
CONFIG_BRIDGE_EBT_802_3=m
CONFIG_BRIDGE_EBT_AMONG=m
CONFIG_BRIDGE_EBT_ARP=m
CONFIG_BRIDGE_EBT_IP=m
CONFIG_BRIDGE_EBT_IP6=m
CONFIG_BRIDGE_EBT_LIMIT=m
CONFIG_BRIDGE_EBT_MARK=m
CONFIG_BRIDGE_EBT_PKTTYPE=m
CONFIG_BRIDGE_EBT_STP=m
CONFIG_BRIDGE_EBT_VLAN=m
CONFIG_BRIDGE_EBT_ARPREPLY=m
CONFIG_BRIDGE_EBT_DNAT=m
CONFIG_BRIDGE_EBT_MARK_T=m
CONFIG_BRIDGE_EBT_REDIRECT=m
CONFIG_BRIDGE_EBT_SNAT=m
CONFIG_BRIDGE_EBT_LOG=m
CONFIG_BRIDGE_EBT_NFLOG=m
CONFIG_IP_DCCP=m
CONFIG_INET_DCCP_DIAG=m
#
# DCCP CCIDs Configuration
#
# CONFIG_IP_DCCP_CCID2_DEBUG is not set
CONFIG_IP_DCCP_CCID3=y
# CONFIG_IP_DCCP_CCID3_DEBUG is not set
CONFIG_IP_DCCP_TFRC_LIB=y
#
# DCCP Kernel Hacking
#
# CONFIG_IP_DCCP_DEBUG is not set
# CONFIG_NET_DCCPPROBE is not set
CONFIG_IP_SCTP=m
CONFIG_NET_SCTPPROBE=m
# CONFIG_SCTP_DBG_OBJCNT is not set
# CONFIG_SCTP_DEFAULT_COOKIE_HMAC_MD5 is not set
CONFIG_SCTP_DEFAULT_COOKIE_HMAC_SHA1=y
# CONFIG_SCTP_DEFAULT_COOKIE_HMAC_NONE is not set
CONFIG_SCTP_COOKIE_HMAC_MD5=y
CONFIG_SCTP_COOKIE_HMAC_SHA1=y
# CONFIG_RDS is not set
# CONFIG_TIPC is not set
CONFIG_ATM=m
CONFIG_ATM_CLIP=m
# CONFIG_ATM_CLIP_NO_ICMP is not set
CONFIG_ATM_LANE=m
# CONFIG_ATM_MPOA is not set
CONFIG_ATM_BR2684=m
# CONFIG_ATM_BR2684_IPFILTER is not set
CONFIG_L2TP=m
CONFIG_L2TP_DEBUGFS=m
CONFIG_L2TP_V3=y
CONFIG_L2TP_IP=m
CONFIG_L2TP_ETH=m
CONFIG_STP=m
CONFIG_GARP=m
CONFIG_MRP=m
CONFIG_BRIDGE=m
CONFIG_BRIDGE_IGMP_SNOOPING=y
CONFIG_BRIDGE_VLAN_FILTERING=y
CONFIG_HAVE_NET_DSA=y
CONFIG_VLAN_8021Q=m
CONFIG_VLAN_8021Q_GVRP=y
CONFIG_VLAN_8021Q_MVRP=y
# CONFIG_DECNET is not set
CONFIG_LLC=m
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_PHONET is not set
# CONFIG_6LOWPAN is not set
CONFIG_IEEE802154=m
# CONFIG_IEEE802154_NL802154_EXPERIMENTAL is not set
CONFIG_IEEE802154_SOCKET=m
CONFIG_MAC802154=m
CONFIG_NET_SCHED=y
#
# Queueing/Scheduling
#
CONFIG_NET_SCH_CBQ=m
CONFIG_NET_SCH_HTB=m
CONFIG_NET_SCH_HFSC=m
CONFIG_NET_SCH_ATM=m
CONFIG_NET_SCH_PRIO=m
CONFIG_NET_SCH_MULTIQ=m
CONFIG_NET_SCH_RED=m
CONFIG_NET_SCH_SFB=m
CONFIG_NET_SCH_SFQ=m
CONFIG_NET_SCH_TEQL=m
CONFIG_NET_SCH_TBF=m
CONFIG_NET_SCH_GRED=m
CONFIG_NET_SCH_DSMARK=m
CONFIG_NET_SCH_NETEM=m
CONFIG_NET_SCH_DRR=m
CONFIG_NET_SCH_MQPRIO=m
CONFIG_NET_SCH_CHOKE=m
CONFIG_NET_SCH_QFQ=m
CONFIG_NET_SCH_CODEL=m
CONFIG_NET_SCH_FQ_CODEL=m
CONFIG_NET_SCH_FQ=m
# CONFIG_NET_SCH_HHF is not set
# CONFIG_NET_SCH_PIE is not set
CONFIG_NET_SCH_INGRESS=m
CONFIG_NET_SCH_PLUG=m
#
# Classification
#
CONFIG_NET_CLS=y
CONFIG_NET_CLS_BASIC=m
CONFIG_NET_CLS_TCINDEX=m
CONFIG_NET_CLS_ROUTE4=m
CONFIG_NET_CLS_FW=m
CONFIG_NET_CLS_U32=m
CONFIG_CLS_U32_PERF=y
CONFIG_CLS_U32_MARK=y
CONFIG_NET_CLS_RSVP=m
CONFIG_NET_CLS_RSVP6=m
CONFIG_NET_CLS_FLOW=m
CONFIG_NET_CLS_CGROUP=y
CONFIG_NET_CLS_BPF=m
# CONFIG_NET_CLS_FLOWER is not set
CONFIG_NET_EMATCH=y
CONFIG_NET_EMATCH_STACK=32
CONFIG_NET_EMATCH_CMP=m
CONFIG_NET_EMATCH_NBYTE=m
CONFIG_NET_EMATCH_U32=m
CONFIG_NET_EMATCH_META=m
CONFIG_NET_EMATCH_TEXT=m
CONFIG_NET_EMATCH_IPSET=m
CONFIG_NET_CLS_ACT=y
CONFIG_NET_ACT_POLICE=m
CONFIG_NET_ACT_GACT=m
CONFIG_GACT_PROB=y
CONFIG_NET_ACT_MIRRED=m
CONFIG_NET_ACT_IPT=m
CONFIG_NET_ACT_NAT=m
CONFIG_NET_ACT_PEDIT=m
CONFIG_NET_ACT_SIMP=m
CONFIG_NET_ACT_SKBEDIT=m
CONFIG_NET_ACT_CSUM=m
# CONFIG_NET_ACT_VLAN is not set
# CONFIG_NET_ACT_BPF is not set
# CONFIG_NET_ACT_CONNMARK is not set
CONFIG_NET_CLS_IND=y
CONFIG_NET_SCH_FIFO=y
CONFIG_DCB=y
CONFIG_DNS_RESOLVER=m
# CONFIG_BATMAN_ADV is not set
CONFIG_OPENVSWITCH=m
CONFIG_OPENVSWITCH_GRE=m
CONFIG_OPENVSWITCH_VXLAN=m
CONFIG_OPENVSWITCH_GENEVE=m
CONFIG_VSOCKETS=m
CONFIG_VMWARE_VMCI_VSOCKETS=m
CONFIG_NETLINK_MMAP=y
CONFIG_NETLINK_DIAG=m
CONFIG_MPLS=y
CONFIG_NET_MPLS_GSO=m
# CONFIG_MPLS_ROUTING is not set
# CONFIG_HSR is not set
# CONFIG_NET_SWITCHDEV is not set
# CONFIG_NET_L3_MASTER_DEV is not set
CONFIG_RPS=y
CONFIG_RFS_ACCEL=y
CONFIG_XPS=y
# CONFIG_CGROUP_NET_PRIO is not set
CONFIG_CGROUP_NET_CLASSID=y
CONFIG_NET_RX_BUSY_POLL=y
CONFIG_BQL=y
CONFIG_BPF_JIT=y
CONFIG_NET_FLOW_LIMIT=y
#
# Network testing
#
CONFIG_NET_PKTGEN=m
# CONFIG_NET_TCPPROBE is not set
CONFIG_NET_DROP_MONITOR=y
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
CONFIG_BT=m
CONFIG_BT_BREDR=y
CONFIG_BT_RFCOMM=m
CONFIG_BT_RFCOMM_TTY=y
CONFIG_BT_BNEP=m
CONFIG_BT_BNEP_MC_FILTER=y
CONFIG_BT_BNEP_PROTO_FILTER=y
CONFIG_BT_CMTP=m
CONFIG_BT_HIDP=m
CONFIG_BT_HS=y
CONFIG_BT_LE=y
# CONFIG_BT_SELFTEST is not set
CONFIG_BT_DEBUGFS=y
#
# Bluetooth device drivers
#
CONFIG_BT_INTEL=m
CONFIG_BT_BCM=m
CONFIG_BT_RTL=m
CONFIG_BT_HCIBTUSB=m
CONFIG_BT_HCIBTUSB_BCM=y
CONFIG_BT_HCIBTUSB_RTL=y
CONFIG_BT_HCIBTSDIO=m
CONFIG_BT_HCIUART=m
CONFIG_BT_HCIUART_H4=y
CONFIG_BT_HCIUART_BCSP=y
CONFIG_BT_HCIUART_ATH3K=y
CONFIG_BT_HCIUART_LL=y
CONFIG_BT_HCIUART_3WIRE=y
# CONFIG_BT_HCIUART_INTEL is not set
# CONFIG_BT_HCIUART_BCM is not set
# CONFIG_BT_HCIUART_QCA is not set
CONFIG_BT_HCIBCM203X=m
CONFIG_BT_HCIBPA10X=m
CONFIG_BT_HCIBFUSB=m
CONFIG_BT_HCIVHCI=m
CONFIG_BT_MRVL=m
CONFIG_BT_MRVL_SDIO=m
CONFIG_BT_ATH3K=m
# CONFIG_AF_RXRPC is not set
CONFIG_FIB_RULES=y
CONFIG_WIRELESS=y
CONFIG_WIRELESS_EXT=y
CONFIG_WEXT_CORE=y
CONFIG_WEXT_PROC=y
CONFIG_WEXT_PRIV=y
CONFIG_CFG80211=m
# CONFIG_NL80211_TESTMODE is not set
# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
# CONFIG_CFG80211_REG_DEBUG is not set
CONFIG_CFG80211_DEFAULT_PS=y
# CONFIG_CFG80211_DEBUGFS is not set
# CONFIG_CFG80211_INTERNAL_REGDB is not set
CONFIG_CFG80211_CRDA_SUPPORT=y
CONFIG_CFG80211_WEXT=y
CONFIG_LIB80211=m
# CONFIG_LIB80211_DEBUG is not set
CONFIG_MAC80211=m
CONFIG_MAC80211_HAS_RC=y
CONFIG_MAC80211_RC_MINSTREL=y
CONFIG_MAC80211_RC_MINSTREL_HT=y
# CONFIG_MAC80211_RC_MINSTREL_VHT is not set
CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
CONFIG_MAC80211_RC_DEFAULT="minstrel_ht"
# CONFIG_MAC80211_MESH is not set
CONFIG_MAC80211_LEDS=y
CONFIG_MAC80211_DEBUGFS=y
# CONFIG_MAC80211_MESSAGE_TRACING is not set
# CONFIG_MAC80211_DEBUG_MENU is not set
CONFIG_MAC80211_STA_HASH_MAX_SIZE=0
# CONFIG_WIMAX is not set
CONFIG_RFKILL=m
CONFIG_RFKILL_LEDS=y
CONFIG_RFKILL_INPUT=y
# CONFIG_NET_9P is not set
# CONFIG_CAIF is not set
CONFIG_CEPH_LIB=m
# CONFIG_CEPH_LIB_PRETTYDEBUG is not set
CONFIG_CEPH_LIB_USE_DNS_RESOLVER=y
# CONFIG_NFC is not set
# CONFIG_LWTUNNEL is not set
CONFIG_HAVE_BPF_JIT=y
#
# Device Drivers
#
#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER=y
CONFIG_UEVENT_HELPER_PATH=""
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
# CONFIG_FIRMWARE_IN_KERNEL is not set
CONFIG_EXTRA_FIRMWARE=""
CONFIG_FW_LOADER_USER_HELPER=y
# CONFIG_FW_LOADER_USER_HELPER_FALLBACK is not set
CONFIG_WANT_DEV_COREDUMP=y
CONFIG_ALLOW_DEV_COREDUMP=y
CONFIG_DEV_COREDUMP=y
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
CONFIG_SYS_HYPERVISOR=y
# CONFIG_GENERIC_CPU_DEVICES is not set
CONFIG_GENERIC_CPU_AUTOPROBE=y
CONFIG_REGMAP=y
CONFIG_REGMAP_I2C=m
CONFIG_DMA_SHARED_BUFFER=y
# CONFIG_FENCE_TRACE is not set
# CONFIG_DMA_CMA is not set
#
# Bus devices
#
CONFIG_CONNECTOR=y
CONFIG_PROC_EVENTS=y
CONFIG_MTD=m
# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
# CONFIG_MTD_CMDLINE_PARTS is not set
# CONFIG_MTD_AR7_PARTS is not set
#
# User Modules And Translation Layers
#
CONFIG_MTD_BLKDEVS=m
CONFIG_MTD_BLOCK=m
# CONFIG_MTD_BLOCK_RO is not set
# CONFIG_FTL is not set
# CONFIG_NFTL is not set
# CONFIG_INFTL is not set
# CONFIG_RFD_FTL is not set
# CONFIG_SSFDC is not set
# CONFIG_SM_FTL is not set
# CONFIG_MTD_OOPS is not set
# CONFIG_MTD_SWAP is not set
# CONFIG_MTD_PARTITIONED_MASTER is not set
#
# RAM/ROM/Flash chip drivers
#
# CONFIG_MTD_CFI is not set
# CONFIG_MTD_JEDECPROBE is not set
CONFIG_MTD_MAP_BANK_WIDTH_1=y
CONFIG_MTD_MAP_BANK_WIDTH_2=y
CONFIG_MTD_MAP_BANK_WIDTH_4=y
# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
CONFIG_MTD_CFI_I1=y
CONFIG_MTD_CFI_I2=y
# CONFIG_MTD_CFI_I4 is not set
# CONFIG_MTD_CFI_I8 is not set
# CONFIG_MTD_RAM is not set
# CONFIG_MTD_ROM is not set
# CONFIG_MTD_ABSENT is not set
#
# Mapping drivers for chip access
#
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
# CONFIG_MTD_INTEL_VR_NOR is not set
# CONFIG_MTD_PLATRAM is not set
#
# Self-contained MTD device drivers
#
# CONFIG_MTD_PMC551 is not set
# CONFIG_MTD_SLRAM is not set
# CONFIG_MTD_PHRAM is not set
# CONFIG_MTD_MTDRAM is not set
# CONFIG_MTD_BLOCK2MTD is not set
#
# Disk-On-Chip Device Drivers
#
# CONFIG_MTD_DOCG3 is not set
# CONFIG_MTD_NAND is not set
# CONFIG_MTD_ONENAND is not set
#
# LPDDR & LPDDR2 PCM memory drivers
#
# CONFIG_MTD_LPDDR is not set
# CONFIG_MTD_SPI_NOR is not set
CONFIG_MTD_UBI=m
CONFIG_MTD_UBI_WL_THRESHOLD=4096
CONFIG_MTD_UBI_BEB_LIMIT=20
# CONFIG_MTD_UBI_FASTMAP is not set
# CONFIG_MTD_UBI_GLUEBI is not set
# CONFIG_MTD_UBI_BLOCK is not set
# CONFIG_OF is not set
CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
CONFIG_PARPORT=m
CONFIG_PARPORT_PC=m
CONFIG_PARPORT_SERIAL=m
# CONFIG_PARPORT_PC_FIFO is not set
# CONFIG_PARPORT_PC_SUPERIO is not set
# CONFIG_PARPORT_GSC is not set
# CONFIG_PARPORT_AX88796 is not set
CONFIG_PARPORT_1284=y
CONFIG_PARPORT_NOT_PC=y
CONFIG_PNP=y
# CONFIG_PNP_DEBUG_MESSAGES is not set
#
# Protocols
#
CONFIG_PNPACPI=y
CONFIG_BLK_DEV=y
CONFIG_BLK_DEV_NULL_BLK=m
CONFIG_BLK_DEV_FD=m
# CONFIG_PARIDE is not set
CONFIG_BLK_DEV_PCIESSD_MTIP32XX=m
CONFIG_ZRAM=m
# CONFIG_ZRAM_LZ4_COMPRESS is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_LOOP_MIN_COUNT=0
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_DRBD is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SKD is not set
CONFIG_BLK_DEV_OSD=m
CONFIG_BLK_DEV_SX8=m
CONFIG_BLK_DEV_RAM=m
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=16384
CONFIG_CDROM_PKTCDVD=m
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
CONFIG_ATA_OVER_ETH=m
CONFIG_XEN_BLKDEV_FRONTEND=m
# CONFIG_XEN_BLKDEV_BACKEND is not set
CONFIG_VIRTIO_BLK=m
# CONFIG_BLK_DEV_HD is not set
CONFIG_BLK_DEV_RBD=m
# CONFIG_BLK_DEV_RSXX is not set
CONFIG_BLK_DEV_NVME=m
#
# Misc devices
#
CONFIG_SENSORS_LIS3LV02D=m
# CONFIG_AD525X_DPOT is not set
# CONFIG_DUMMY_IRQ is not set
# CONFIG_IBM_ASM is not set
# CONFIG_PHANTOM is not set
CONFIG_SGI_IOC4=m
CONFIG_TIFM_CORE=m
CONFIG_TIFM_7XX1=m
# CONFIG_ICS932S401 is not set
CONFIG_ENCLOSURE_SERVICES=m
CONFIG_SGI_XP=m
CONFIG_HP_ILO=m
CONFIG_SGI_GRU=m
# CONFIG_SGI_GRU_DEBUG is not set
CONFIG_APDS9802ALS=m
CONFIG_ISL29003=m
CONFIG_ISL29020=m
CONFIG_SENSORS_TSL2550=m
# CONFIG_SENSORS_BH1780 is not set
CONFIG_SENSORS_BH1770=m
CONFIG_SENSORS_APDS990X=m
# CONFIG_HMC6352 is not set
# CONFIG_DS1682 is not set
CONFIG_VMWARE_BALLOON=m
# CONFIG_BMP085_I2C is not set
# CONFIG_USB_SWITCH_FSA9480 is not set
# CONFIG_SRAM is not set
# CONFIG_C2PORT is not set
#
# EEPROM support
#
CONFIG_EEPROM_AT24=m
CONFIG_EEPROM_LEGACY=m
CONFIG_EEPROM_MAX6875=m
CONFIG_EEPROM_93CX6=m
CONFIG_CB710_CORE=m
# CONFIG_CB710_DEBUG is not set
CONFIG_CB710_DEBUG_ASSUMPTIONS=y
#
# Texas Instruments shared transport line discipline
#
CONFIG_SENSORS_LIS3_I2C=m
#
# Altera FPGA firmware download module
#
CONFIG_ALTERA_STAPL=m
CONFIG_INTEL_MEI=m
CONFIG_INTEL_MEI_ME=m
# CONFIG_INTEL_MEI_TXE is not set
CONFIG_VMWARE_VMCI=m
#
# Intel MIC Bus Driver
#
# CONFIG_INTEL_MIC_BUS is not set
#
# SCIF Bus Driver
#
# CONFIG_SCIF_BUS is not set
#
# Intel MIC Host Driver
#
#
# Intel MIC Card Driver
#
#
# SCIF Driver
#
#
# Intel MIC Coprocessor State Management (COSM) Drivers
#
# CONFIG_GENWQE is not set
# CONFIG_ECHO is not set
# CONFIG_CXL_BASE is not set
# CONFIG_CXL_KERNEL_API is not set
# CONFIG_CXL_EEH is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
# SCSI device support
#
CONFIG_SCSI_MOD=y
CONFIG_RAID_ATTRS=m
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
CONFIG_SCSI_NETLINK=y
# CONFIG_SCSI_MQ_DEFAULT is not set
CONFIG_SCSI_PROC_FS=y
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=m
CONFIG_CHR_DEV_ST=m
CONFIG_CHR_DEV_OSST=m
CONFIG_BLK_DEV_SR=m
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=m
CONFIG_CHR_DEV_SCH=m
CONFIG_SCSI_ENCLOSURE=m
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y
CONFIG_SCSI_SCAN_ASYNC=y
#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=m
CONFIG_SCSI_FC_ATTRS=m
CONFIG_SCSI_ISCSI_ATTRS=m
CONFIG_SCSI_SAS_ATTRS=m
CONFIG_SCSI_SAS_LIBSAS=m
CONFIG_SCSI_SAS_ATA=y
CONFIG_SCSI_SAS_HOST_SMP=y
CONFIG_SCSI_SRP_ATTRS=m
CONFIG_SCSI_LOWLEVEL=y
CONFIG_ISCSI_TCP=m
CONFIG_ISCSI_BOOT_SYSFS=m
CONFIG_SCSI_CXGB3_ISCSI=m
CONFIG_SCSI_CXGB4_ISCSI=m
CONFIG_SCSI_BNX2_ISCSI=m
CONFIG_SCSI_BNX2X_FCOE=m
CONFIG_BE2ISCSI=m
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
CONFIG_SCSI_HPSA=m
CONFIG_SCSI_3W_9XXX=m
CONFIG_SCSI_3W_SAS=m
# CONFIG_SCSI_ACARD is not set
CONFIG_SCSI_AACRAID=m
# CONFIG_SCSI_AIC7XXX is not set
CONFIG_SCSI_AIC79XX=m
CONFIG_AIC79XX_CMDS_PER_DEVICE=4
CONFIG_AIC79XX_RESET_DELAY_MS=15000
# CONFIG_AIC79XX_DEBUG_ENABLE is not set
CONFIG_AIC79XX_DEBUG_MASK=0
# CONFIG_AIC79XX_REG_PRETTY_PRINT is not set
# CONFIG_SCSI_AIC94XX is not set
CONFIG_SCSI_MVSAS=m
# CONFIG_SCSI_MVSAS_DEBUG is not set
CONFIG_SCSI_MVSAS_TASKLET=y
CONFIG_SCSI_MVUMI=m
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ADVANSYS is not set
CONFIG_SCSI_ARCMSR=m
# CONFIG_SCSI_ESAS2R is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
CONFIG_MEGARAID_SAS=m
CONFIG_SCSI_MPT3SAS=m
CONFIG_SCSI_MPT2SAS_MAX_SGE=128
CONFIG_SCSI_MPT3SAS_MAX_SGE=128
CONFIG_SCSI_MPT2SAS=m
CONFIG_SCSI_UFSHCD=m
CONFIG_SCSI_UFSHCD_PCI=m
# CONFIG_SCSI_UFSHCD_PLATFORM is not set
CONFIG_SCSI_HPTIOP=m
# CONFIG_SCSI_BUSLOGIC is not set
CONFIG_VMWARE_PVSCSI=m
# CONFIG_XEN_SCSI_FRONTEND is not set
CONFIG_HYPERV_STORAGE=m
CONFIG_LIBFC=m
CONFIG_LIBFCOE=m
CONFIG_FCOE=m
CONFIG_FCOE_FNIC=m
# CONFIG_SCSI_SNIC is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
CONFIG_SCSI_ISCI=m
# CONFIG_SCSI_IPS is not set
CONFIG_SCSI_INITIO=m
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_PPA is not set
# CONFIG_SCSI_IMM is not set
CONFIG_SCSI_STEX=m
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
CONFIG_SCSI_QLA_FC=m
# CONFIG_TCM_QLA2XXX is not set
CONFIG_SCSI_QLA_ISCSI=m
CONFIG_SCSI_LPFC=m
# CONFIG_SCSI_LPFC_DEBUG_FS is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_AM53C974 is not set
# CONFIG_SCSI_WD719X is not set
CONFIG_SCSI_DEBUG=m
CONFIG_SCSI_PMCRAID=m
CONFIG_SCSI_PM8001=m
CONFIG_SCSI_BFA_FC=m
CONFIG_SCSI_VIRTIO=m
# CONFIG_SCSI_CHELSIO_FCOE is not set
CONFIG_SCSI_DH=y
CONFIG_SCSI_DH_RDAC=y
CONFIG_SCSI_DH_HP_SW=y
CONFIG_SCSI_DH_EMC=y
CONFIG_SCSI_DH_ALUA=y
CONFIG_SCSI_OSD_INITIATOR=m
CONFIG_SCSI_OSD_ULD=m
CONFIG_SCSI_OSD_DPRINT_SENSE=1
# CONFIG_SCSI_OSD_DEBUG is not set
CONFIG_ATA=m
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_ATA_VERBOSE_ERROR=y
CONFIG_ATA_ACPI=y
# CONFIG_SATA_ZPODD is not set
CONFIG_SATA_PMP=y
#
# Controllers with non-SFF native interface
#
CONFIG_SATA_AHCI=m
CONFIG_SATA_AHCI_PLATFORM=m
# CONFIG_SATA_INIC162X is not set
CONFIG_SATA_ACARD_AHCI=m
CONFIG_SATA_SIL24=m
CONFIG_ATA_SFF=y
#
# SFF controllers with custom DMA interface
#
CONFIG_PDC_ADMA=m
CONFIG_SATA_QSTOR=m
CONFIG_SATA_SX4=m
CONFIG_ATA_BMDMA=y
#
# SATA SFF controllers with BMDMA
#
CONFIG_ATA_PIIX=m
CONFIG_SATA_MV=m
CONFIG_SATA_NV=m
CONFIG_SATA_PROMISE=m
CONFIG_SATA_SIL=m
CONFIG_SATA_SIS=m
CONFIG_SATA_SVW=m
CONFIG_SATA_ULI=m
CONFIG_SATA_VIA=m
CONFIG_SATA_VITESSE=m
#
# PATA SFF controllers with BMDMA
#
CONFIG_PATA_ALI=m
CONFIG_PATA_AMD=m
CONFIG_PATA_ARTOP=m
CONFIG_PATA_ATIIXP=m
CONFIG_PATA_ATP867X=m
CONFIG_PATA_CMD64X=m
# CONFIG_PATA_CYPRESS is not set
# CONFIG_PATA_EFAR is not set
CONFIG_PATA_HPT366=m
CONFIG_PATA_HPT37X=m
CONFIG_PATA_HPT3X2N=m
CONFIG_PATA_HPT3X3=m
# CONFIG_PATA_HPT3X3_DMA is not set
CONFIG_PATA_IT8213=m
CONFIG_PATA_IT821X=m
CONFIG_PATA_JMICRON=m
CONFIG_PATA_MARVELL=m
CONFIG_PATA_NETCELL=m
CONFIG_PATA_NINJA32=m
# CONFIG_PATA_NS87415 is not set
CONFIG_PATA_OLDPIIX=m
# CONFIG_PATA_OPTIDMA is not set
CONFIG_PATA_PDC2027X=m
CONFIG_PATA_PDC_OLD=m
# CONFIG_PATA_RADISYS is not set
CONFIG_PATA_RDC=m
CONFIG_PATA_SCH=m
CONFIG_PATA_SERVERWORKS=m
CONFIG_PATA_SIL680=m
CONFIG_PATA_SIS=m
CONFIG_PATA_TOSHIBA=m
# CONFIG_PATA_TRIFLEX is not set
CONFIG_PATA_VIA=m
# CONFIG_PATA_WINBOND is not set
#
# PIO-only SFF controllers
#
# CONFIG_PATA_CMD640_PCI is not set
# CONFIG_PATA_MPIIX is not set
# CONFIG_PATA_NS87410 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_RZ1000 is not set
#
# Generic fallback / legacy drivers
#
CONFIG_PATA_ACPI=m
CONFIG_ATA_GENERIC=m
# CONFIG_PATA_LEGACY is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
CONFIG_MD_AUTODETECT=y
CONFIG_MD_LINEAR=m
CONFIG_MD_RAID0=m
CONFIG_MD_RAID1=m
CONFIG_MD_RAID10=m
CONFIG_MD_RAID456=m
# CONFIG_MD_MULTIPATH is not set
CONFIG_MD_FAULTY=m
# CONFIG_MD_CLUSTER is not set
# CONFIG_BCACHE is not set
CONFIG_BLK_DEV_DM_BUILTIN=y
CONFIG_BLK_DEV_DM=m
# CONFIG_DM_MQ_DEFAULT is not set
CONFIG_DM_DEBUG=y
CONFIG_DM_BUFIO=m
CONFIG_DM_BIO_PRISON=m
CONFIG_DM_PERSISTENT_DATA=m
# CONFIG_DM_DEBUG_BLOCK_STACK_TRACING is not set
CONFIG_DM_CRYPT=m
CONFIG_DM_SNAPSHOT=m
CONFIG_DM_THIN_PROVISIONING=m
CONFIG_DM_CACHE=m
CONFIG_DM_CACHE_MQ=m
CONFIG_DM_CACHE_SMQ=m
CONFIG_DM_CACHE_CLEANER=m
CONFIG_DM_ERA=m
CONFIG_DM_MIRROR=m
CONFIG_DM_LOG_USERSPACE=m
CONFIG_DM_RAID=m
CONFIG_DM_ZERO=m
CONFIG_DM_MULTIPATH=m
CONFIG_DM_MULTIPATH_QL=m
CONFIG_DM_MULTIPATH_ST=m
CONFIG_DM_DELAY=m
CONFIG_DM_UEVENT=y
CONFIG_DM_FLAKEY=m
CONFIG_DM_VERITY=m
CONFIG_DM_SWITCH=m
# CONFIG_DM_LOG_WRITES is not set
CONFIG_TARGET_CORE=m
CONFIG_TCM_IBLOCK=m
CONFIG_TCM_FILEIO=m
CONFIG_TCM_PSCSI=m
# CONFIG_TCM_USER2 is not set
CONFIG_LOOPBACK_TARGET=m
CONFIG_TCM_FC=m
CONFIG_ISCSI_TARGET=m
# CONFIG_SBP_TARGET is not set
CONFIG_FUSION=y
CONFIG_FUSION_SPI=m
# CONFIG_FUSION_FC is not set
CONFIG_FUSION_SAS=m
CONFIG_FUSION_MAX_SGE=128
CONFIG_FUSION_CTL=m
CONFIG_FUSION_LOGGING=y
#
# IEEE 1394 (FireWire) support
#
CONFIG_FIREWIRE=m
CONFIG_FIREWIRE_OHCI=m
CONFIG_FIREWIRE_SBP2=m
CONFIG_FIREWIRE_NET=m
# CONFIG_FIREWIRE_NOSY is not set
CONFIG_MACINTOSH_DRIVERS=y
CONFIG_MAC_EMUMOUSEBTN=y
CONFIG_NETDEVICES=y
CONFIG_MII=m
CONFIG_NET_CORE=y
CONFIG_BONDING=m
CONFIG_DUMMY=m
# CONFIG_EQUALIZER is not set
CONFIG_NET_FC=y
CONFIG_IFB=m
CONFIG_NET_TEAM=m
CONFIG_NET_TEAM_MODE_BROADCAST=m
CONFIG_NET_TEAM_MODE_ROUNDROBIN=m
CONFIG_NET_TEAM_MODE_RANDOM=m
CONFIG_NET_TEAM_MODE_ACTIVEBACKUP=m
CONFIG_NET_TEAM_MODE_LOADBALANCE=m
CONFIG_MACVLAN=m
CONFIG_MACVTAP=m
# CONFIG_IPVLAN is not set
CONFIG_VXLAN=m
CONFIG_GENEVE=m
CONFIG_NETCONSOLE=m
CONFIG_NETCONSOLE_DYNAMIC=y
CONFIG_NETPOLL=y
CONFIG_NET_POLL_CONTROLLER=y
CONFIG_TUN=m
# CONFIG_TUN_VNET_CROSS_LE is not set
CONFIG_VETH=m
CONFIG_VIRTIO_NET=m
CONFIG_NLMON=m
# CONFIG_ARCNET is not set
# CONFIG_ATM_DRIVERS is not set
#
# CAIF transport drivers
#
CONFIG_VHOST_NET=m
# CONFIG_VHOST_SCSI is not set
CONFIG_VHOST_RING=m
CONFIG_VHOST=m
# CONFIG_VHOST_CROSS_ENDIAN_LEGACY is not set
#
# Distributed Switch Architecture drivers
#
# CONFIG_NET_DSA_MV88E6XXX is not set
# CONFIG_NET_DSA_MV88E6XXX_NEED_PPU is not set
CONFIG_ETHERNET=y
CONFIG_MDIO=m
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_NET_VENDOR_ADAPTEC is not set
CONFIG_NET_VENDOR_AGERE=y
# CONFIG_ET131X is not set
# CONFIG_NET_VENDOR_ALTEON is not set
# CONFIG_ALTERA_TSE is not set
# CONFIG_NET_VENDOR_AMD is not set
CONFIG_NET_VENDOR_ARC=y
CONFIG_NET_VENDOR_ATHEROS=y
CONFIG_ATL2=m
CONFIG_ATL1=m
CONFIG_ATL1E=m
CONFIG_ATL1C=m
CONFIG_ALX=m
# CONFIG_NET_VENDOR_AURORA is not set
CONFIG_NET_CADENCE=y
CONFIG_MACB=m
CONFIG_NET_VENDOR_BROADCOM=y
CONFIG_B44=m
CONFIG_B44_PCI_AUTOSELECT=y
CONFIG_B44_PCICORE_AUTOSELECT=y
CONFIG_B44_PCI=y
# CONFIG_BCMGENET is not set
CONFIG_BNX2=m
CONFIG_CNIC=m
CONFIG_TIGON3=m
CONFIG_BNX2X=m
CONFIG_BNX2X_SRIOV=y
# CONFIG_BNX2X_VXLAN is not set
# CONFIG_BNXT is not set
CONFIG_NET_VENDOR_BROCADE=y
CONFIG_BNA=m
CONFIG_NET_VENDOR_CAVIUM=y
# CONFIG_THUNDER_NIC_PF is not set
# CONFIG_THUNDER_NIC_VF is not set
# CONFIG_THUNDER_NIC_BGX is not set
# CONFIG_LIQUIDIO is not set
CONFIG_NET_VENDOR_CHELSIO=y
# CONFIG_CHELSIO_T1 is not set
CONFIG_CHELSIO_T3=m
CONFIG_CHELSIO_T4=m
# CONFIG_CHELSIO_T4_DCB is not set
CONFIG_CHELSIO_T4VF=m
CONFIG_NET_VENDOR_CISCO=y
CONFIG_ENIC=m
# CONFIG_CX_ECAT is not set
CONFIG_DNET=m
CONFIG_NET_VENDOR_DEC=y
CONFIG_NET_TULIP=y
CONFIG_DE2104X=m
CONFIG_DE2104X_DSL=0
CONFIG_TULIP=m
# CONFIG_TULIP_MWI is not set
CONFIG_TULIP_MMIO=y
# CONFIG_TULIP_NAPI is not set
CONFIG_DE4X5=m
CONFIG_WINBOND_840=m
CONFIG_DM9102=m
CONFIG_ULI526X=m
CONFIG_PCMCIA_XIRCOM=m
# CONFIG_NET_VENDOR_DLINK is not set
CONFIG_NET_VENDOR_EMULEX=y
CONFIG_BE2NET=m
CONFIG_BE2NET_HWMON=y
CONFIG_BE2NET_VXLAN=y
CONFIG_NET_VENDOR_EZCHIP=y
# CONFIG_NET_VENDOR_EXAR is not set
# CONFIG_NET_VENDOR_HP is not set
CONFIG_NET_VENDOR_INTEL=y
# CONFIG_E100 is not set
CONFIG_E1000=m
CONFIG_E1000E=m
CONFIG_IGB=m
CONFIG_IGB_HWMON=y
CONFIG_IGB_DCA=y
CONFIG_IGBVF=m
# CONFIG_IXGB is not set
CONFIG_IXGBE=m
# CONFIG_IXGBE_VXLAN is not set
CONFIG_IXGBE_HWMON=y
CONFIG_IXGBE_DCA=y
CONFIG_IXGBE_DCB=y
CONFIG_IXGBEVF=m
CONFIG_I40E=m
CONFIG_I40E_VXLAN=y
CONFIG_I40E_DCB=y
# CONFIG_I40E_FCOE is not set
CONFIG_I40EVF=m
CONFIG_FM10K=m
CONFIG_FM10K_VXLAN=y
# CONFIG_NET_VENDOR_I825XX is not set
CONFIG_JME=m
CONFIG_NET_VENDOR_MARVELL=y
CONFIG_MVMDIO=m
CONFIG_SKGE=m
# CONFIG_SKGE_DEBUG is not set
CONFIG_SKGE_GENESIS=y
CONFIG_SKY2=m
# CONFIG_SKY2_DEBUG is not set
CONFIG_NET_VENDOR_MELLANOX=y
CONFIG_MLX4_EN=m
CONFIG_MLX4_EN_DCB=y
CONFIG_MLX4_EN_VXLAN=y
CONFIG_MLX4_CORE=m
CONFIG_MLX4_DEBUG=y
CONFIG_MLX5_CORE=m
CONFIG_MLX5_CORE_EN=y
# CONFIG_MLXSW_CORE is not set
# CONFIG_NET_VENDOR_MICREL is not set
CONFIG_NET_VENDOR_MYRI=y
CONFIG_MYRI10GE=m
CONFIG_MYRI10GE_DCA=y
# CONFIG_FEALNX is not set
# CONFIG_NET_VENDOR_NATSEMI is not set
# CONFIG_NET_VENDOR_NVIDIA is not set
CONFIG_NET_VENDOR_OKI=y
CONFIG_ETHOC=m
CONFIG_NET_PACKET_ENGINE=y
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
CONFIG_NET_VENDOR_QLOGIC=y
CONFIG_QLA3XXX=m
CONFIG_QLCNIC=m
CONFIG_QLCNIC_SRIOV=y
CONFIG_QLCNIC_DCB=y
# CONFIG_QLCNIC_VXLAN is not set
CONFIG_QLCNIC_HWMON=y
CONFIG_QLGE=m
CONFIG_NETXEN_NIC=m
# CONFIG_QED is not set
CONFIG_NET_VENDOR_QUALCOMM=y
CONFIG_NET_VENDOR_REALTEK=y
# CONFIG_ATP is not set
CONFIG_8139CP=m
CONFIG_8139TOO=m
# CONFIG_8139TOO_PIO is not set
# CONFIG_8139TOO_TUNE_TWISTER is not set
CONFIG_8139TOO_8129=y
# CONFIG_8139_OLD_RX_RESET is not set
CONFIG_R8169=m
CONFIG_NET_VENDOR_RENESAS=y
# CONFIG_NET_VENDOR_RDC is not set
CONFIG_NET_VENDOR_ROCKER=y
CONFIG_NET_VENDOR_SAMSUNG=y
# CONFIG_SXGBE_ETH is not set
# CONFIG_NET_VENDOR_SEEQ is not set
# CONFIG_NET_VENDOR_SILAN is not set
# CONFIG_NET_VENDOR_SIS is not set
CONFIG_SFC=m
CONFIG_SFC_MTD=y
CONFIG_SFC_MCDI_MON=y
CONFIG_SFC_SRIOV=y
CONFIG_SFC_MCDI_LOGGING=y
CONFIG_NET_VENDOR_SMSC=y
CONFIG_EPIC100=m
# CONFIG_SMSC911X is not set
CONFIG_SMSC9420=m
# CONFIG_NET_VENDOR_STMICRO is not set
# CONFIG_NET_VENDOR_SUN is not set
CONFIG_NET_VENDOR_SYNOPSYS=y
# CONFIG_NET_VENDOR_TEHUTI is not set
CONFIG_NET_VENDOR_TI=y
# CONFIG_TI_CPSW_ALE is not set
CONFIG_TLAN=m
# CONFIG_NET_VENDOR_VIA is not set
# CONFIG_NET_VENDOR_WIZNET is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_NET_SB1000 is not set
CONFIG_PHYLIB=y
#
# MII PHY device drivers
#
# CONFIG_AQUANTIA_PHY is not set
CONFIG_AT803X_PHY=m
CONFIG_AMD_PHY=m
CONFIG_MARVELL_PHY=m
CONFIG_DAVICOM_PHY=m
CONFIG_QSEMI_PHY=m
CONFIG_LXT_PHY=m
CONFIG_CICADA_PHY=m
CONFIG_VITESSE_PHY=m
# CONFIG_TERANETICS_PHY is not set
CONFIG_SMSC_PHY=m
CONFIG_BCM_NET_PHYLIB=m
CONFIG_BROADCOM_PHY=m
# CONFIG_BCM7XXX_PHY is not set
CONFIG_BCM87XX_PHY=m
CONFIG_ICPLUS_PHY=m
CONFIG_REALTEK_PHY=m
CONFIG_NATIONAL_PHY=m
CONFIG_STE10XP=m
CONFIG_LSI_ET1011C_PHY=m
CONFIG_MICREL_PHY=m
# CONFIG_DP83848_PHY is not set
# CONFIG_DP83867_PHY is not set
# CONFIG_MICROCHIP_PHY is not set
CONFIG_FIXED_PHY=y
CONFIG_MDIO_BITBANG=m
# CONFIG_MDIO_OCTEON is not set
# CONFIG_MDIO_BCM_UNIMAC is not set
# CONFIG_PLIP is not set
CONFIG_PPP=m
CONFIG_PPP_BSDCOMP=m
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_FILTER=y
CONFIG_PPP_MPPE=m
CONFIG_PPP_MULTILINK=y
CONFIG_PPPOATM=m
CONFIG_PPPOE=m
CONFIG_PPTP=m
CONFIG_PPPOL2TP=m
CONFIG_PPP_ASYNC=m
CONFIG_PPP_SYNC_TTY=m
CONFIG_SLIP=m
CONFIG_SLHC=m
CONFIG_SLIP_COMPRESSED=y
CONFIG_SLIP_SMART=y
# CONFIG_SLIP_MODE_SLIP6 is not set
CONFIG_USB_NET_DRIVERS=y
CONFIG_USB_CATC=m
CONFIG_USB_KAWETH=m
CONFIG_USB_PEGASUS=m
CONFIG_USB_RTL8150=m
CONFIG_USB_RTL8152=m
# CONFIG_USB_LAN78XX is not set
CONFIG_USB_USBNET=m
CONFIG_USB_NET_AX8817X=m
CONFIG_USB_NET_AX88179_178A=m
CONFIG_USB_NET_CDCETHER=m
CONFIG_USB_NET_CDC_EEM=m
CONFIG_USB_NET_CDC_NCM=m
CONFIG_USB_NET_HUAWEI_CDC_NCM=m
CONFIG_USB_NET_CDC_MBIM=m
CONFIG_USB_NET_DM9601=m
# CONFIG_USB_NET_SR9700 is not set
# CONFIG_USB_NET_SR9800 is not set
CONFIG_USB_NET_SMSC75XX=m
CONFIG_USB_NET_SMSC95XX=m
CONFIG_USB_NET_GL620A=m
CONFIG_USB_NET_NET1080=m
CONFIG_USB_NET_PLUSB=m
CONFIG_USB_NET_MCS7830=m
CONFIG_USB_NET_RNDIS_HOST=m
CONFIG_USB_NET_CDC_SUBSET=m
CONFIG_USB_ALI_M5632=y
CONFIG_USB_AN2720=y
CONFIG_USB_BELKIN=y
CONFIG_USB_ARMLINUX=y
CONFIG_USB_EPSON2888=y
CONFIG_USB_KC2190=y
CONFIG_USB_NET_ZAURUS=m
CONFIG_USB_NET_CX82310_ETH=m
CONFIG_USB_NET_KALMIA=m
CONFIG_USB_NET_QMI_WWAN=m
CONFIG_USB_HSO=m
CONFIG_USB_NET_INT51X1=m
CONFIG_USB_IPHETH=m
CONFIG_USB_SIERRA_NET=m
CONFIG_USB_VL600=m
# CONFIG_USB_NET_CH9200 is not set
CONFIG_WLAN=y
# CONFIG_LIBERTAS_THINFIRM is not set
# CONFIG_AIRO is not set
# CONFIG_ATMEL is not set
# CONFIG_AT76C50X_USB is not set
# CONFIG_PRISM54 is not set
# CONFIG_USB_ZD1201 is not set
# CONFIG_USB_NET_RNDIS_WLAN is not set
# CONFIG_ADM8211 is not set
# CONFIG_RTL8180 is not set
CONFIG_RTL8187=m
CONFIG_RTL8187_LEDS=y
# CONFIG_MAC80211_HWSIM is not set
CONFIG_MWL8K=m
CONFIG_ATH_COMMON=m
CONFIG_ATH_CARDS=m
# CONFIG_ATH_DEBUG is not set
# CONFIG_ATH5K is not set
# CONFIG_ATH5K_PCI is not set
CONFIG_ATH9K_HW=m
CONFIG_ATH9K_COMMON=m
CONFIG_ATH9K_BTCOEX_SUPPORT=y
CONFIG_ATH9K=m
CONFIG_ATH9K_PCI=y
CONFIG_ATH9K_AHB=y
CONFIG_ATH9K_DEBUGFS=y
# CONFIG_ATH9K_STATION_STATISTICS is not set
# CONFIG_ATH9K_DYNACK is not set
CONFIG_ATH9K_WOW=y
CONFIG_ATH9K_RFKILL=y
# CONFIG_ATH9K_CHANNEL_CONTEXT is not set
CONFIG_ATH9K_PCOEM=y
CONFIG_ATH9K_HTC=m
# CONFIG_ATH9K_HTC_DEBUGFS is not set
CONFIG_CARL9170=m
CONFIG_CARL9170_LEDS=y
# CONFIG_CARL9170_DEBUGFS is not set
CONFIG_CARL9170_WPC=y
# CONFIG_CARL9170_HWRNG is not set
# CONFIG_ATH6KL is not set
# CONFIG_AR5523 is not set
CONFIG_WIL6210=m
CONFIG_WIL6210_ISR_COR=y
CONFIG_WIL6210_TRACING=y
# CONFIG_ATH10K is not set
# CONFIG_WCN36XX is not set
# CONFIG_B43 is not set
# CONFIG_B43LEGACY is not set
CONFIG_BRCMUTIL=m
CONFIG_BRCMSMAC=m
CONFIG_BRCMFMAC=m
CONFIG_BRCMFMAC_PROTO_BCDC=y
CONFIG_BRCMFMAC_SDIO=y
CONFIG_BRCMFMAC_USB=y
# CONFIG_BRCMFMAC_PCIE is not set
# CONFIG_BRCM_TRACING is not set
# CONFIG_BRCMDBG is not set
# CONFIG_HOSTAP is not set
# CONFIG_IPW2100 is not set
# CONFIG_IPW2200 is not set
CONFIG_IWLWIFI=m
CONFIG_IWLWIFI_LEDS=y
CONFIG_IWLDVM=m
CONFIG_IWLMVM=m
CONFIG_IWLWIFI_OPMODE_MODULAR=y
# CONFIG_IWLWIFI_BCAST_FILTERING is not set
# CONFIG_IWLWIFI_UAPSD is not set
#
# Debugging Options
#
# CONFIG_IWLWIFI_DEBUG is not set
CONFIG_IWLWIFI_DEBUGFS=y
# CONFIG_IWLWIFI_DEVICE_TRACING is not set
CONFIG_IWLEGACY=m
CONFIG_IWL4965=m
CONFIG_IWL3945=m
#
# iwl3945 / iwl4965 Debugging Options
#
CONFIG_IWLEGACY_DEBUG=y
CONFIG_IWLEGACY_DEBUGFS=y
# CONFIG_LIBERTAS is not set
# CONFIG_HERMES is not set
# CONFIG_P54_COMMON is not set
CONFIG_RT2X00=m
# CONFIG_RT2400PCI is not set
# CONFIG_RT2500PCI is not set
CONFIG_RT61PCI=m
CONFIG_RT2800PCI=m
CONFIG_RT2800PCI_RT33XX=y
CONFIG_RT2800PCI_RT35XX=y
CONFIG_RT2800PCI_RT53XX=y
CONFIG_RT2800PCI_RT3290=y
# CONFIG_RT2500USB is not set
CONFIG_RT73USB=m
CONFIG_RT2800USB=m
CONFIG_RT2800USB_RT33XX=y
CONFIG_RT2800USB_RT35XX=y
# CONFIG_RT2800USB_RT3573 is not set
CONFIG_RT2800USB_RT53XX=y
CONFIG_RT2800USB_RT55XX=y
CONFIG_RT2800USB_UNKNOWN=y
CONFIG_RT2800_LIB=m
CONFIG_RT2800_LIB_MMIO=m
CONFIG_RT2X00_LIB_MMIO=m
CONFIG_RT2X00_LIB_PCI=m
CONFIG_RT2X00_LIB_USB=m
CONFIG_RT2X00_LIB=m
CONFIG_RT2X00_LIB_FIRMWARE=y
CONFIG_RT2X00_LIB_CRYPTO=y
CONFIG_RT2X00_LIB_LEDS=y
CONFIG_RT2X00_LIB_DEBUGFS=y
# CONFIG_RT2X00_DEBUG is not set
# CONFIG_WL_MEDIATEK is not set
CONFIG_RTL_CARDS=m
CONFIG_RTL8192CE=m
CONFIG_RTL8192SE=m
CONFIG_RTL8192DE=m
CONFIG_RTL8723AE=m
# CONFIG_RTL8723BE is not set
CONFIG_RTL8188EE=m
# CONFIG_RTL8192EE is not set
# CONFIG_RTL8821AE is not set
CONFIG_RTL8192CU=m
CONFIG_RTLWIFI=m
CONFIG_RTLWIFI_PCI=m
CONFIG_RTLWIFI_USB=m
# CONFIG_RTLWIFI_DEBUG is not set
CONFIG_RTL8192C_COMMON=m
CONFIG_RTL8723_COMMON=m
CONFIG_RTLBTCOEXIST=m
# CONFIG_RTL8XXXU is not set
# CONFIG_WL_TI is not set
# CONFIG_ZD1211RW is not set
CONFIG_MWIFIEX=m
CONFIG_MWIFIEX_SDIO=m
CONFIG_MWIFIEX_PCIE=m
CONFIG_MWIFIEX_USB=m
# CONFIG_CW1200 is not set
# CONFIG_RSI_91X is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
#
CONFIG_WAN=y
# CONFIG_LANMEDIA is not set
CONFIG_HDLC=m
CONFIG_HDLC_RAW=m
# CONFIG_HDLC_RAW_ETH is not set
CONFIG_HDLC_CISCO=m
CONFIG_HDLC_FR=m
CONFIG_HDLC_PPP=m
#
# X.25/LAPB support is disabled
#
# CONFIG_PCI200SYN is not set
# CONFIG_WANXL is not set
# CONFIG_PC300TOO is not set
# CONFIG_FARSYNC is not set
# CONFIG_DSCC4 is not set
CONFIG_DLCI=m
CONFIG_DLCI_MAX=8
# CONFIG_SBNI is not set
CONFIG_IEEE802154_DRIVERS=m
CONFIG_IEEE802154_FAKELB=m
# CONFIG_IEEE802154_ATUSB is not set
CONFIG_XEN_NETDEV_FRONTEND=m
# CONFIG_XEN_NETDEV_BACKEND is not set
CONFIG_VMXNET3=m
# CONFIG_FUJITSU_ES is not set
CONFIG_HYPERV_NET=m
CONFIG_ISDN=y
CONFIG_ISDN_I4L=m
CONFIG_ISDN_PPP=y
CONFIG_ISDN_PPP_VJ=y
CONFIG_ISDN_MPP=y
CONFIG_IPPP_FILTER=y
# CONFIG_ISDN_PPP_BSDCOMP is not set
CONFIG_ISDN_AUDIO=y
CONFIG_ISDN_TTY_FAX=y
#
# ISDN feature submodules
#
CONFIG_ISDN_DIVERSION=m
#
# ISDN4Linux hardware drivers
#
#
# Passive cards
#
CONFIG_ISDN_DRV_HISAX=m
#
# D-channel protocol features
#
CONFIG_HISAX_EURO=y
CONFIG_DE_AOC=y
CONFIG_HISAX_NO_SENDCOMPLETE=y
CONFIG_HISAX_NO_LLC=y
CONFIG_HISAX_NO_KEYPAD=y
CONFIG_HISAX_1TR6=y
CONFIG_HISAX_NI1=y
CONFIG_HISAX_MAX_CARDS=8
#
# HiSax supported cards
#
CONFIG_HISAX_16_3=y
CONFIG_HISAX_TELESPCI=y
CONFIG_HISAX_S0BOX=y
CONFIG_HISAX_FRITZPCI=y
CONFIG_HISAX_AVM_A1_PCMCIA=y
CONFIG_HISAX_ELSA=y
CONFIG_HISAX_DIEHLDIVA=y
CONFIG_HISAX_SEDLBAUER=y
CONFIG_HISAX_NETJET=y
CONFIG_HISAX_NETJET_U=y
CONFIG_HISAX_NICCY=y
CONFIG_HISAX_BKM_A4T=y
CONFIG_HISAX_SCT_QUADRO=y
CONFIG_HISAX_GAZEL=y
CONFIG_HISAX_HFC_PCI=y
CONFIG_HISAX_W6692=y
CONFIG_HISAX_HFC_SX=y
CONFIG_HISAX_ENTERNOW_PCI=y
# CONFIG_HISAX_DEBUG is not set
#
# HiSax PCMCIA card service modules
#
#
# HiSax sub driver modules
#
CONFIG_HISAX_ST5481=m
# CONFIG_HISAX_HFCUSB is not set
CONFIG_HISAX_HFC4S8S=m
CONFIG_HISAX_FRITZ_PCIPNP=m
#
# Active cards
#
CONFIG_ISDN_CAPI=m
# CONFIG_CAPI_TRACE is not set
CONFIG_ISDN_CAPI_CAPI20=m
CONFIG_ISDN_CAPI_MIDDLEWARE=y
CONFIG_ISDN_CAPI_CAPIDRV=m
# CONFIG_ISDN_CAPI_CAPIDRV_VERBOSE is not set
#
# CAPI hardware drivers
#
CONFIG_CAPI_AVM=y
CONFIG_ISDN_DRV_AVMB1_B1PCI=m
CONFIG_ISDN_DRV_AVMB1_B1PCIV4=y
CONFIG_ISDN_DRV_AVMB1_T1PCI=m
CONFIG_ISDN_DRV_AVMB1_C4=m
# CONFIG_CAPI_EICON is not set
CONFIG_ISDN_DRV_GIGASET=m
CONFIG_GIGASET_CAPI=y
# CONFIG_GIGASET_I4L is not set
# CONFIG_GIGASET_DUMMYLL is not set
CONFIG_GIGASET_BASE=m
CONFIG_GIGASET_M105=m
CONFIG_GIGASET_M101=m
# CONFIG_GIGASET_DEBUG is not set
CONFIG_HYSDN=m
CONFIG_HYSDN_CAPI=y
CONFIG_MISDN=m
CONFIG_MISDN_DSP=m
CONFIG_MISDN_L1OIP=m
#
# mISDN hardware drivers
#
CONFIG_MISDN_HFCPCI=m
CONFIG_MISDN_HFCMULTI=m
CONFIG_MISDN_HFCUSB=m
CONFIG_MISDN_AVMFRITZ=m
CONFIG_MISDN_SPEEDFAX=m
CONFIG_MISDN_INFINEON=m
CONFIG_MISDN_W6692=m
CONFIG_MISDN_NETJET=m
CONFIG_MISDN_IPAC=m
CONFIG_MISDN_ISAR=m
CONFIG_ISDN_HDLC=m
# CONFIG_NVM is not set
#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_LEDS=y
CONFIG_INPUT_FF_MEMLESS=m
CONFIG_INPUT_POLLDEV=m
CONFIG_INPUT_SPARSEKMAP=m
# CONFIG_INPUT_MATRIXKMAP is not set
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_ADP5588 is not set
# CONFIG_KEYBOARD_ADP5589 is not set
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_QT1070 is not set
# CONFIG_KEYBOARD_QT2160 is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_TCA6416 is not set
# CONFIG_KEYBOARD_TCA8418 is not set
# CONFIG_KEYBOARD_LM8323 is not set
# CONFIG_KEYBOARD_LM8333 is not set
# CONFIG_KEYBOARD_MAX7359 is not set
# CONFIG_KEYBOARD_MCS is not set
# CONFIG_KEYBOARD_MPR121 is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_OPENCORES is not set
# CONFIG_KEYBOARD_SAMSUNG is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_CYPRESS=y
CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
CONFIG_MOUSE_PS2_ELANTECH=y
CONFIG_MOUSE_PS2_SENTELIC=y
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
CONFIG_MOUSE_PS2_FOCALTECH=y
# CONFIG_MOUSE_PS2_VMMOUSE is not set
CONFIG_MOUSE_SERIAL=m
CONFIG_MOUSE_APPLETOUCH=m
CONFIG_MOUSE_BCM5974=m
CONFIG_MOUSE_CYAPA=m
# CONFIG_MOUSE_ELAN_I2C is not set
CONFIG_MOUSE_VSXXXAA=m
CONFIG_MOUSE_SYNAPTICS_I2C=m
CONFIG_MOUSE_SYNAPTICS_USB=m
# CONFIG_INPUT_JOYSTICK is not set
CONFIG_INPUT_TABLET=y
CONFIG_TABLET_USB_ACECAD=m
CONFIG_TABLET_USB_AIPTEK=m
CONFIG_TABLET_USB_GTCO=m
# CONFIG_TABLET_USB_HANWANG is not set
CONFIG_TABLET_USB_KBTAB=m
# CONFIG_TABLET_SERIAL_WACOM4 is not set
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_TOUCHSCREEN_PROPERTIES=y
# CONFIG_TOUCHSCREEN_AD7879 is not set
# CONFIG_TOUCHSCREEN_ATMEL_MXT is not set
# CONFIG_TOUCHSCREEN_BU21013 is not set
# CONFIG_TOUCHSCREEN_CYTTSP_CORE is not set
# CONFIG_TOUCHSCREEN_CYTTSP4_CORE is not set
# CONFIG_TOUCHSCREEN_DYNAPRO is not set
# CONFIG_TOUCHSCREEN_HAMPSHIRE is not set
# CONFIG_TOUCHSCREEN_EETI is not set
# CONFIG_TOUCHSCREEN_FUJITSU is not set
# CONFIG_TOUCHSCREEN_GOODIX is not set
# CONFIG_TOUCHSCREEN_ILI210X is not set
# CONFIG_TOUCHSCREEN_GUNZE is not set
# CONFIG_TOUCHSCREEN_ELAN is not set
CONFIG_TOUCHSCREEN_ELO=m
CONFIG_TOUCHSCREEN_WACOM_W8001=m
CONFIG_TOUCHSCREEN_WACOM_I2C=m
# CONFIG_TOUCHSCREEN_MAX11801 is not set
# CONFIG_TOUCHSCREEN_MCS5000 is not set
# CONFIG_TOUCHSCREEN_MMS114 is not set
# CONFIG_TOUCHSCREEN_MTOUCH is not set
# CONFIG_TOUCHSCREEN_INEXIO is not set
# CONFIG_TOUCHSCREEN_MK712 is not set
# CONFIG_TOUCHSCREEN_PENMOUNT is not set
# CONFIG_TOUCHSCREEN_EDT_FT5X06 is not set
# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
# CONFIG_TOUCHSCREEN_PIXCIR is not set
# CONFIG_TOUCHSCREEN_WDT87XX_I2C is not set
# CONFIG_TOUCHSCREEN_WM97XX is not set
# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
# CONFIG_TOUCHSCREEN_TSC_SERIO is not set
# CONFIG_TOUCHSCREEN_TSC2004 is not set
# CONFIG_TOUCHSCREEN_TSC2007 is not set
# CONFIG_TOUCHSCREEN_ST1232 is not set
# CONFIG_TOUCHSCREEN_SUR40 is not set
# CONFIG_TOUCHSCREEN_SX8654 is not set
# CONFIG_TOUCHSCREEN_TPS6507X is not set
# CONFIG_TOUCHSCREEN_ROHM_BU21023 is not set
CONFIG_INPUT_MISC=y
# CONFIG_INPUT_AD714X is not set
# CONFIG_INPUT_BMA150 is not set
# CONFIG_INPUT_E3X0_BUTTON is not set
CONFIG_INPUT_PCSPKR=m
# CONFIG_INPUT_MMA8450 is not set
# CONFIG_INPUT_MPU3050 is not set
CONFIG_INPUT_APANEL=m
CONFIG_INPUT_ATLAS_BTNS=m
CONFIG_INPUT_ATI_REMOTE2=m
CONFIG_INPUT_KEYSPAN_REMOTE=m
# CONFIG_INPUT_KXTJ9 is not set
CONFIG_INPUT_POWERMATE=m
CONFIG_INPUT_YEALINK=m
CONFIG_INPUT_CM109=m
CONFIG_INPUT_UINPUT=m
# CONFIG_INPUT_PCF8574 is not set
# CONFIG_INPUT_ADXL34X is not set
# CONFIG_INPUT_IMS_PCU is not set
# CONFIG_INPUT_CMA3000 is not set
CONFIG_INPUT_XEN_KBDDEV_FRONTEND=m
# CONFIG_INPUT_IDEAPAD_SLIDEBAR is not set
# CONFIG_INPUT_DRV2665_HAPTICS is not set
# CONFIG_INPUT_DRV2667_HAPTICS is not set
#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=y
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PARKBD is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
CONFIG_SERIO_RAW=m
CONFIG_SERIO_ALTERA_PS2=m
# CONFIG_SERIO_PS2MULT is not set
CONFIG_SERIO_ARC_PS2=m
CONFIG_HYPERV_KEYBOARD=m
# CONFIG_USERIO is not set
# CONFIG_GAMEPORT is not set
#
# Character devices
#
CONFIG_TTY=y
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_VT_CONSOLE_SLEEP=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
CONFIG_UNIX98_PTYS=y
CONFIG_DEVPTS_MULTIPLE_INSTANCES=y
# CONFIG_LEGACY_PTYS is not set
CONFIG_SERIAL_NONSTANDARD=y
# CONFIG_ROCKETPORT is not set
CONFIG_CYCLADES=m
# CONFIG_CYZ_INTR is not set
# CONFIG_MOXA_INTELLIO is not set
# CONFIG_MOXA_SMARTIO is not set
CONFIG_SYNCLINK=m
CONFIG_SYNCLINKMP=m
CONFIG_SYNCLINK_GT=m
CONFIG_NOZOMI=m
# CONFIG_ISI is not set
CONFIG_N_HDLC=m
CONFIG_N_GSM=m
# CONFIG_TRACE_SINK is not set
CONFIG_DEVMEM=y
# CONFIG_DEVKMEM is not set
#
# Serial drivers
#
CONFIG_SERIAL_EARLYCON=y
CONFIG_SERIAL_8250=y
# CONFIG_SERIAL_8250_DEPRECATED_OPTIONS is not set
CONFIG_SERIAL_8250_PNP=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_DMA=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_NR_UARTS=32
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
# CONFIG_SERIAL_8250_DETECT_IRQ is not set
CONFIG_SERIAL_8250_RSA=y
# CONFIG_SERIAL_8250_FSL is not set
# CONFIG_SERIAL_8250_DW is not set
# CONFIG_SERIAL_8250_RT288X is not set
# CONFIG_SERIAL_8250_FINTEK is not set
# CONFIG_SERIAL_8250_MID is not set
#
# Non-8250 serial port support
#
# CONFIG_SERIAL_KGDB_NMI is not set
# CONFIG_SERIAL_UARTLITE is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_CONSOLE_POLL=y
CONFIG_SERIAL_JSM=m
# CONFIG_SERIAL_SCCNXP is not set
# CONFIG_SERIAL_SC16IS7XX is not set
# CONFIG_SERIAL_ALTERA_JTAGUART is not set
# CONFIG_SERIAL_ALTERA_UART is not set
CONFIG_SERIAL_ARC=m
CONFIG_SERIAL_ARC_NR_PORTS=1
# CONFIG_SERIAL_RP2 is not set
# CONFIG_SERIAL_FSL_LPUART is not set
CONFIG_PRINTER=m
# CONFIG_LP_CONSOLE is not set
CONFIG_PPDEV=m
CONFIG_HVC_DRIVER=y
CONFIG_HVC_IRQ=y
CONFIG_HVC_XEN=y
CONFIG_HVC_XEN_FRONTEND=y
CONFIG_VIRTIO_CONSOLE=m
CONFIG_IPMI_HANDLER=m
# CONFIG_IPMI_PANIC_EVENT is not set
CONFIG_IPMI_DEVICE_INTERFACE=m
CONFIG_IPMI_SI=m
# CONFIG_IPMI_SI_PROBE_DEFAULTS is not set
CONFIG_IPMI_SSIF=m
CONFIG_IPMI_WATCHDOG=m
CONFIG_IPMI_POWEROFF=m
CONFIG_HW_RANDOM=y
CONFIG_HW_RANDOM_TIMERIOMEM=m
CONFIG_HW_RANDOM_INTEL=m
CONFIG_HW_RANDOM_AMD=m
CONFIG_HW_RANDOM_VIA=m
CONFIG_HW_RANDOM_VIRTIO=m
CONFIG_HW_RANDOM_TPM=m
CONFIG_NVRAM=y
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_MWAVE is not set
CONFIG_RAW_DRIVER=y
CONFIG_MAX_RAW_DEVS=8192
CONFIG_HPET=y
CONFIG_HPET_MMAP=y
# CONFIG_HPET_MMAP_DEFAULT is not set
CONFIG_HANGCHECK_TIMER=m
CONFIG_UV_MMTIMER=m
CONFIG_TCG_TPM=y
CONFIG_TCG_TIS=y
CONFIG_TCG_TIS_I2C_ATMEL=m
CONFIG_TCG_TIS_I2C_INFINEON=m
CONFIG_TCG_TIS_I2C_NUVOTON=m
CONFIG_TCG_NSC=m
CONFIG_TCG_ATMEL=m
CONFIG_TCG_INFINEON=m
# CONFIG_TCG_XEN is not set
CONFIG_TCG_CRB=m
CONFIG_TELCLOCK=m
CONFIG_DEVPORT=y
# CONFIG_XILLYBUS is not set
#
# I2C support
#
CONFIG_I2C=m
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=m
CONFIG_I2C_MUX=m
#
# Multiplexer I2C Chip support
#
# CONFIG_I2C_MUX_PCA9541 is not set
# CONFIG_I2C_MUX_PINCTRL is not set
# CONFIG_I2C_MUX_REG is not set
CONFIG_I2C_HELPER_AUTO=y
CONFIG_I2C_SMBUS=m
CONFIG_I2C_ALGOBIT=m
CONFIG_I2C_ALGOPCA=m
#
# I2C Hardware Bus support
#
#
# PC SMBus host controller drivers
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
CONFIG_I2C_AMD756=m
CONFIG_I2C_AMD756_S4882=m
CONFIG_I2C_AMD8111=m
CONFIG_I2C_I801=m
CONFIG_I2C_ISCH=m
CONFIG_I2C_ISMT=m
CONFIG_I2C_PIIX4=m
CONFIG_I2C_NFORCE2=m
CONFIG_I2C_NFORCE2_S4985=m
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
CONFIG_I2C_SIS96X=m
CONFIG_I2C_VIA=m
CONFIG_I2C_VIAPRO=m
#
# ACPI drivers
#
CONFIG_I2C_SCMI=m
#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
CONFIG_I2C_DESIGNWARE_CORE=m
CONFIG_I2C_DESIGNWARE_PLATFORM=m
# CONFIG_I2C_DESIGNWARE_PCI is not set
# CONFIG_I2C_EMEV2 is not set
# CONFIG_I2C_OCORES is not set
CONFIG_I2C_PCA_PLATFORM=m
# CONFIG_I2C_PXA_PCI is not set
CONFIG_I2C_SIMTEC=m
# CONFIG_I2C_XILINX is not set
#
# External I2C/SMBus adapter drivers
#
CONFIG_I2C_DIOLAN_U2C=m
CONFIG_I2C_PARPORT=m
CONFIG_I2C_PARPORT_LIGHT=m
# CONFIG_I2C_ROBOTFUZZ_OSIF is not set
# CONFIG_I2C_TAOS_EVM is not set
CONFIG_I2C_TINY_USB=m
CONFIG_I2C_VIPERBOARD=m
#
# Other I2C/SMBus bus drivers
#
CONFIG_I2C_STUB=m
# CONFIG_I2C_SLAVE is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_SPI is not set
# CONFIG_SPMI is not set
# CONFIG_HSI is not set
#
# PPS support
#
CONFIG_PPS=m
# CONFIG_PPS_DEBUG is not set
#
# PPS clients support
#
# CONFIG_PPS_CLIENT_KTIMER is not set
CONFIG_PPS_CLIENT_LDISC=m
CONFIG_PPS_CLIENT_PARPORT=m
CONFIG_PPS_CLIENT_GPIO=m
#
# PPS generators support
#
#
# PTP clock support
#
CONFIG_PTP_1588_CLOCK=m
CONFIG_DP83640_PHY=m
CONFIG_PINCTRL=y
#
# Pin controllers
#
# CONFIG_DEBUG_PINCTRL is not set
# CONFIG_PINCTRL_CHERRYVIEW is not set
# CONFIG_PINCTRL_BROXTON is not set
# CONFIG_PINCTRL_SUNRISEPOINT is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
# CONFIG_PDA_POWER is not set
# CONFIG_TEST_POWER is not set
# CONFIG_BATTERY_DS2780 is not set
# CONFIG_BATTERY_DS2781 is not set
# CONFIG_BATTERY_DS2782 is not set
# CONFIG_BATTERY_SBS is not set
# CONFIG_BATTERY_BQ27XXX is not set
# CONFIG_BATTERY_MAX17040 is not set
# CONFIG_BATTERY_MAX17042 is not set
# CONFIG_CHARGER_MAX8903 is not set
# CONFIG_CHARGER_LP8727 is not set
# CONFIG_CHARGER_BQ2415X is not set
CONFIG_CHARGER_SMB347=m
# CONFIG_BATTERY_GAUGE_LTC2941 is not set
CONFIG_POWER_RESET=y
# CONFIG_POWER_RESET_RESTART is not set
# CONFIG_POWER_AVS is not set
CONFIG_HWMON=y
CONFIG_HWMON_VID=m
# CONFIG_HWMON_DEBUG_CHIP is not set
#
# Native drivers
#
CONFIG_SENSORS_ABITUGURU=m
CONFIG_SENSORS_ABITUGURU3=m
CONFIG_SENSORS_AD7414=m
CONFIG_SENSORS_AD7418=m
CONFIG_SENSORS_ADM1021=m
CONFIG_SENSORS_ADM1025=m
CONFIG_SENSORS_ADM1026=m
CONFIG_SENSORS_ADM1029=m
CONFIG_SENSORS_ADM1031=m
CONFIG_SENSORS_ADM9240=m
CONFIG_SENSORS_ADT7X10=m
CONFIG_SENSORS_ADT7410=m
CONFIG_SENSORS_ADT7411=m
CONFIG_SENSORS_ADT7462=m
CONFIG_SENSORS_ADT7470=m
CONFIG_SENSORS_ADT7475=m
CONFIG_SENSORS_ASC7621=m
CONFIG_SENSORS_K8TEMP=m
CONFIG_SENSORS_K10TEMP=m
CONFIG_SENSORS_FAM15H_POWER=m
CONFIG_SENSORS_APPLESMC=m
CONFIG_SENSORS_ASB100=m
CONFIG_SENSORS_ATXP1=m
CONFIG_SENSORS_DS620=m
CONFIG_SENSORS_DS1621=m
CONFIG_SENSORS_DELL_SMM=m
CONFIG_SENSORS_I5K_AMB=m
CONFIG_SENSORS_F71805F=m
CONFIG_SENSORS_F71882FG=m
CONFIG_SENSORS_F75375S=m
CONFIG_SENSORS_FSCHMD=m
CONFIG_SENSORS_GL518SM=m
CONFIG_SENSORS_GL520SM=m
CONFIG_SENSORS_G760A=m
# CONFIG_SENSORS_G762 is not set
# CONFIG_SENSORS_HIH6130 is not set
CONFIG_SENSORS_IBMAEM=m
CONFIG_SENSORS_IBMPEX=m
# CONFIG_SENSORS_I5500 is not set
CONFIG_SENSORS_CORETEMP=m
CONFIG_SENSORS_IT87=m
# CONFIG_SENSORS_JC42 is not set
# CONFIG_SENSORS_POWR1220 is not set
CONFIG_SENSORS_LINEAGE=m
# CONFIG_SENSORS_LTC2945 is not set
CONFIG_SENSORS_LTC4151=m
CONFIG_SENSORS_LTC4215=m
# CONFIG_SENSORS_LTC4222 is not set
CONFIG_SENSORS_LTC4245=m
# CONFIG_SENSORS_LTC4260 is not set
CONFIG_SENSORS_LTC4261=m
CONFIG_SENSORS_MAX16065=m
CONFIG_SENSORS_MAX1619=m
CONFIG_SENSORS_MAX1668=m
CONFIG_SENSORS_MAX197=m
CONFIG_SENSORS_MAX6639=m
CONFIG_SENSORS_MAX6642=m
CONFIG_SENSORS_MAX6650=m
CONFIG_SENSORS_MAX6697=m
# CONFIG_SENSORS_MAX31790 is not set
# CONFIG_SENSORS_HTU21 is not set
CONFIG_SENSORS_MCP3021=m
CONFIG_SENSORS_LM63=m
CONFIG_SENSORS_LM73=m
CONFIG_SENSORS_LM75=m
CONFIG_SENSORS_LM77=m
CONFIG_SENSORS_LM78=m
CONFIG_SENSORS_LM80=m
CONFIG_SENSORS_LM83=m
CONFIG_SENSORS_LM85=m
CONFIG_SENSORS_LM87=m
CONFIG_SENSORS_LM90=m
CONFIG_SENSORS_LM92=m
CONFIG_SENSORS_LM93=m
CONFIG_SENSORS_LM95234=m
CONFIG_SENSORS_LM95241=m
CONFIG_SENSORS_LM95245=m
CONFIG_SENSORS_PC87360=m
CONFIG_SENSORS_PC87427=m
CONFIG_SENSORS_NTC_THERMISTOR=m
# CONFIG_SENSORS_NCT6683 is not set
CONFIG_SENSORS_NCT6775=m
# CONFIG_SENSORS_NCT7802 is not set
# CONFIG_SENSORS_NCT7904 is not set
CONFIG_SENSORS_PCF8591=m
CONFIG_PMBUS=m
CONFIG_SENSORS_PMBUS=m
CONFIG_SENSORS_ADM1275=m
CONFIG_SENSORS_LM25066=m
CONFIG_SENSORS_LTC2978=m
CONFIG_SENSORS_MAX16064=m
# CONFIG_SENSORS_MAX20751 is not set
CONFIG_SENSORS_MAX34440=m
CONFIG_SENSORS_MAX8688=m
# CONFIG_SENSORS_TPS40422 is not set
CONFIG_SENSORS_UCD9000=m
CONFIG_SENSORS_UCD9200=m
CONFIG_SENSORS_ZL6100=m
CONFIG_SENSORS_SHT21=m
# CONFIG_SENSORS_SHTC1 is not set
CONFIG_SENSORS_SIS5595=m
CONFIG_SENSORS_DME1737=m
CONFIG_SENSORS_EMC1403=m
# CONFIG_SENSORS_EMC2103 is not set
CONFIG_SENSORS_EMC6W201=m
CONFIG_SENSORS_SMSC47M1=m
CONFIG_SENSORS_SMSC47M192=m
CONFIG_SENSORS_SMSC47B397=m
CONFIG_SENSORS_SCH56XX_COMMON=m
CONFIG_SENSORS_SCH5627=m
CONFIG_SENSORS_SCH5636=m
# CONFIG_SENSORS_SMM665 is not set
# CONFIG_SENSORS_ADC128D818 is not set
CONFIG_SENSORS_ADS1015=m
CONFIG_SENSORS_ADS7828=m
CONFIG_SENSORS_AMC6821=m
CONFIG_SENSORS_INA209=m
CONFIG_SENSORS_INA2XX=m
# CONFIG_SENSORS_TC74 is not set
CONFIG_SENSORS_THMC50=m
CONFIG_SENSORS_TMP102=m
# CONFIG_SENSORS_TMP103 is not set
CONFIG_SENSORS_TMP401=m
CONFIG_SENSORS_TMP421=m
CONFIG_SENSORS_VIA_CPUTEMP=m
CONFIG_SENSORS_VIA686A=m
CONFIG_SENSORS_VT1211=m
CONFIG_SENSORS_VT8231=m
CONFIG_SENSORS_W83781D=m
CONFIG_SENSORS_W83791D=m
CONFIG_SENSORS_W83792D=m
CONFIG_SENSORS_W83793=m
CONFIG_SENSORS_W83795=m
# CONFIG_SENSORS_W83795_FANCTRL is not set
CONFIG_SENSORS_W83L785TS=m
CONFIG_SENSORS_W83L786NG=m
CONFIG_SENSORS_W83627HF=m
CONFIG_SENSORS_W83627EHF=m
#
# ACPI drivers
#
CONFIG_SENSORS_ACPI_POWER=m
CONFIG_SENSORS_ATK0110=m
CONFIG_THERMAL=y
CONFIG_THERMAL_HWMON=y
CONFIG_THERMAL_WRITABLE_TRIPS=y
CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
# CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE is not set
# CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE is not set
# CONFIG_THERMAL_DEFAULT_GOV_POWER_ALLOCATOR is not set
CONFIG_THERMAL_GOV_FAIR_SHARE=y
CONFIG_THERMAL_GOV_STEP_WISE=y
CONFIG_THERMAL_GOV_BANG_BANG=y
CONFIG_THERMAL_GOV_USER_SPACE=y
# CONFIG_THERMAL_GOV_POWER_ALLOCATOR is not set
# CONFIG_THERMAL_EMULATION is not set
CONFIG_INTEL_POWERCLAMP=m
CONFIG_X86_PKG_TEMP_THERMAL=m
# CONFIG_INTEL_SOC_DTS_THERMAL is not set
# CONFIG_INT340X_THERMAL is not set
# CONFIG_INTEL_PCH_THERMAL is not set
CONFIG_WATCHDOG=y
CONFIG_WATCHDOG_CORE=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
#
# Watchdog Device Drivers
#
CONFIG_SOFT_WATCHDOG=m
# CONFIG_XILINX_WATCHDOG is not set
# CONFIG_CADENCE_WATCHDOG is not set
# CONFIG_DW_WATCHDOG is not set
# CONFIG_MAX63XX_WATCHDOG is not set
# CONFIG_ACQUIRE_WDT is not set
# CONFIG_ADVANTECH_WDT is not set
CONFIG_ALIM1535_WDT=m
CONFIG_ALIM7101_WDT=m
CONFIG_F71808E_WDT=m
CONFIG_SP5100_TCO=m
CONFIG_SBC_FITPC2_WATCHDOG=m
# CONFIG_EUROTECH_WDT is not set
CONFIG_IB700_WDT=m
CONFIG_IBMASR=m
# CONFIG_WAFER_WDT is not set
CONFIG_I6300ESB_WDT=m
CONFIG_IE6XX_WDT=m
CONFIG_ITCO_WDT=m
CONFIG_ITCO_VENDOR_SUPPORT=y
CONFIG_IT8712F_WDT=m
CONFIG_IT87_WDT=m
CONFIG_HP_WATCHDOG=m
CONFIG_HPWDT_NMI_DECODING=y
# CONFIG_SC1200_WDT is not set
# CONFIG_PC87413_WDT is not set
CONFIG_NV_TCO=m
# CONFIG_60XX_WDT is not set
# CONFIG_CPU5_WDT is not set
CONFIG_SMSC_SCH311X_WDT=m
# CONFIG_SMSC37B787_WDT is not set
CONFIG_VIA_WDT=m
CONFIG_W83627HF_WDT=m
CONFIG_W83877F_WDT=m
CONFIG_W83977F_WDT=m
CONFIG_MACHZ_WDT=m
# CONFIG_SBC_EPX_C3_WATCHDOG is not set
# CONFIG_BCM7038_WDT is not set
CONFIG_XEN_WDT=m
#
# PCI-based Watchdog Cards
#
CONFIG_PCIPCWATCHDOG=m
CONFIG_WDTPCI=m
#
# USB-based Watchdog Cards
#
CONFIG_USBPCWATCHDOG=m
CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
CONFIG_SSB=m
CONFIG_SSB_SPROM=y
CONFIG_SSB_PCIHOST_POSSIBLE=y
CONFIG_SSB_PCIHOST=y
# CONFIG_SSB_B43_PCI_BRIDGE is not set
CONFIG_SSB_SDIOHOST_POSSIBLE=y
CONFIG_SSB_SDIOHOST=y
# CONFIG_SSB_HOST_SOC is not set
# CONFIG_SSB_DEBUG is not set
CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
CONFIG_SSB_DRIVER_PCICORE=y
CONFIG_BCMA_POSSIBLE=y
#
# Broadcom specific AMBA
#
CONFIG_BCMA=m
CONFIG_BCMA_HOST_PCI_POSSIBLE=y
CONFIG_BCMA_HOST_PCI=y
# CONFIG_BCMA_HOST_SOC is not set
CONFIG_BCMA_DRIVER_PCI=y
CONFIG_BCMA_DRIVER_GMAC_CMN=y
# CONFIG_BCMA_DEBUG is not set
#
# Multifunction device drivers
#
CONFIG_MFD_CORE=m
# CONFIG_MFD_BCM590XX is not set
# CONFIG_MFD_CROS_EC is not set
# CONFIG_MFD_DLN2 is not set
# CONFIG_MFD_MC13XXX_I2C is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_INTEL_QUARK_I2C_GPIO is not set
CONFIG_LPC_ICH=m
CONFIG_LPC_SCH=m
# CONFIG_MFD_INTEL_LPSS_ACPI is not set
# CONFIG_MFD_INTEL_LPSS_PCI is not set
# CONFIG_MFD_JANZ_CMODIO is not set
# CONFIG_MFD_KEMPLD is not set
# CONFIG_MFD_MT6397 is not set
# CONFIG_MFD_MENF21BMC is not set
CONFIG_MFD_VIPERBOARD=m
# CONFIG_MFD_RETU is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_MFD_RDC321X is not set
CONFIG_MFD_RTSX_PCI=m
# CONFIG_MFD_RTSX_USB is not set
# CONFIG_MFD_RN5T618 is not set
# CONFIG_MFD_SI476X_CORE is not set
CONFIG_MFD_SM501=m
# CONFIG_MFD_SKY81452 is not set
# CONFIG_ABX500_CORE is not set
# CONFIG_MFD_SYSCON is not set
# CONFIG_MFD_TI_AM335X_TSCADC is not set
# CONFIG_MFD_LP3943 is not set
# CONFIG_TPS6105X is not set
# CONFIG_TPS6507X is not set
# CONFIG_MFD_TPS65217 is not set
# CONFIG_MFD_TPS65218 is not set
# CONFIG_MFD_WL1273_CORE is not set
# CONFIG_MFD_LM3533 is not set
# CONFIG_MFD_TMIO is not set
CONFIG_MFD_VX855=m
# CONFIG_MFD_ARIZONA_I2C is not set
# CONFIG_MFD_WM8994 is not set
# CONFIG_REGULATOR is not set
CONFIG_MEDIA_SUPPORT=m
#
# Multimedia core support
#
CONFIG_MEDIA_CAMERA_SUPPORT=y
CONFIG_MEDIA_ANALOG_TV_SUPPORT=y
CONFIG_MEDIA_DIGITAL_TV_SUPPORT=y
CONFIG_MEDIA_RADIO_SUPPORT=y
# CONFIG_MEDIA_SDR_SUPPORT is not set
CONFIG_MEDIA_RC_SUPPORT=y
# CONFIG_MEDIA_CONTROLLER is not set
CONFIG_VIDEO_DEV=m
CONFIG_VIDEO_V4L2=m
# CONFIG_VIDEO_ADV_DEBUG is not set
# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
CONFIG_VIDEO_TUNER=m
CONFIG_VIDEOBUF_GEN=m
CONFIG_VIDEOBUF_DMA_SG=m
CONFIG_VIDEOBUF_VMALLOC=m
CONFIG_VIDEOBUF_DVB=m
CONFIG_VIDEOBUF2_CORE=m
CONFIG_VIDEOBUF2_MEMOPS=m
CONFIG_VIDEOBUF2_VMALLOC=m
CONFIG_VIDEOBUF2_DMA_SG=m
CONFIG_VIDEOBUF2_DVB=m
CONFIG_DVB_CORE=m
CONFIG_DVB_NET=y
CONFIG_TTPCI_EEPROM=m
CONFIG_DVB_MAX_ADAPTERS=8
CONFIG_DVB_DYNAMIC_MINORS=y
#
# Media drivers
#
CONFIG_RC_CORE=m
CONFIG_RC_MAP=m
CONFIG_RC_DECODERS=y
CONFIG_LIRC=m
CONFIG_IR_LIRC_CODEC=m
CONFIG_IR_NEC_DECODER=m
CONFIG_IR_RC5_DECODER=m
CONFIG_IR_RC6_DECODER=m
CONFIG_IR_JVC_DECODER=m
CONFIG_IR_SONY_DECODER=m
CONFIG_IR_SANYO_DECODER=m
CONFIG_IR_SHARP_DECODER=m
CONFIG_IR_MCE_KBD_DECODER=m
CONFIG_IR_XMP_DECODER=m
CONFIG_RC_DEVICES=y
CONFIG_RC_ATI_REMOTE=m
CONFIG_IR_ENE=m
# CONFIG_IR_HIX5HD2 is not set
CONFIG_IR_IMON=m
CONFIG_IR_MCEUSB=m
CONFIG_IR_ITE_CIR=m
CONFIG_IR_FINTEK=m
CONFIG_IR_NUVOTON=m
CONFIG_IR_REDRAT3=m
CONFIG_IR_STREAMZAP=m
CONFIG_IR_WINBOND_CIR=m
# CONFIG_IR_IGORPLUGUSB is not set
CONFIG_IR_IGUANA=m
CONFIG_IR_TTUSBIR=m
# CONFIG_RC_LOOPBACK is not set
CONFIG_IR_GPIO_CIR=m
CONFIG_MEDIA_USB_SUPPORT=y
#
# Webcam devices
#
CONFIG_USB_VIDEO_CLASS=m
CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y
CONFIG_USB_GSPCA=m
CONFIG_USB_M5602=m
CONFIG_USB_STV06XX=m
CONFIG_USB_GL860=m
CONFIG_USB_GSPCA_BENQ=m
CONFIG_USB_GSPCA_CONEX=m
CONFIG_USB_GSPCA_CPIA1=m
# CONFIG_USB_GSPCA_DTCS033 is not set
CONFIG_USB_GSPCA_ETOMS=m
CONFIG_USB_GSPCA_FINEPIX=m
CONFIG_USB_GSPCA_JEILINJ=m
CONFIG_USB_GSPCA_JL2005BCD=m
# CONFIG_USB_GSPCA_KINECT is not set
CONFIG_USB_GSPCA_KONICA=m
CONFIG_USB_GSPCA_MARS=m
CONFIG_USB_GSPCA_MR97310A=m
CONFIG_USB_GSPCA_NW80X=m
CONFIG_USB_GSPCA_OV519=m
CONFIG_USB_GSPCA_OV534=m
CONFIG_USB_GSPCA_OV534_9=m
CONFIG_USB_GSPCA_PAC207=m
CONFIG_USB_GSPCA_PAC7302=m
CONFIG_USB_GSPCA_PAC7311=m
CONFIG_USB_GSPCA_SE401=m
CONFIG_USB_GSPCA_SN9C2028=m
CONFIG_USB_GSPCA_SN9C20X=m
CONFIG_USB_GSPCA_SONIXB=m
CONFIG_USB_GSPCA_SONIXJ=m
CONFIG_USB_GSPCA_SPCA500=m
CONFIG_USB_GSPCA_SPCA501=m
CONFIG_USB_GSPCA_SPCA505=m
CONFIG_USB_GSPCA_SPCA506=m
CONFIG_USB_GSPCA_SPCA508=m
CONFIG_USB_GSPCA_SPCA561=m
CONFIG_USB_GSPCA_SPCA1528=m
CONFIG_USB_GSPCA_SQ905=m
CONFIG_USB_GSPCA_SQ905C=m
CONFIG_USB_GSPCA_SQ930X=m
CONFIG_USB_GSPCA_STK014=m
# CONFIG_USB_GSPCA_STK1135 is not set
CONFIG_USB_GSPCA_STV0680=m
CONFIG_USB_GSPCA_SUNPLUS=m
CONFIG_USB_GSPCA_T613=m
CONFIG_USB_GSPCA_TOPRO=m
# CONFIG_USB_GSPCA_TOUPTEK is not set
CONFIG_USB_GSPCA_TV8532=m
CONFIG_USB_GSPCA_VC032X=m
CONFIG_USB_GSPCA_VICAM=m
CONFIG_USB_GSPCA_XIRLINK_CIT=m
CONFIG_USB_GSPCA_ZC3XX=m
CONFIG_USB_PWC=m
# CONFIG_USB_PWC_DEBUG is not set
CONFIG_USB_PWC_INPUT_EVDEV=y
# CONFIG_VIDEO_CPIA2 is not set
CONFIG_USB_ZR364XX=m
CONFIG_USB_STKWEBCAM=m
CONFIG_USB_S2255=m
# CONFIG_VIDEO_USBTV is not set
#
# Analog TV USB devices
#
CONFIG_VIDEO_PVRUSB2=m
CONFIG_VIDEO_PVRUSB2_SYSFS=y
CONFIG_VIDEO_PVRUSB2_DVB=y
# CONFIG_VIDEO_PVRUSB2_DEBUGIFC is not set
CONFIG_VIDEO_HDPVR=m
CONFIG_VIDEO_USBVISION=m
# CONFIG_VIDEO_STK1160_COMMON is not set
# CONFIG_VIDEO_GO7007 is not set
#
# Analog/digital TV USB devices
#
CONFIG_VIDEO_AU0828=m
CONFIG_VIDEO_AU0828_V4L2=y
# CONFIG_VIDEO_AU0828_RC is not set
CONFIG_VIDEO_CX231XX=m
CONFIG_VIDEO_CX231XX_RC=y
CONFIG_VIDEO_CX231XX_ALSA=m
CONFIG_VIDEO_CX231XX_DVB=m
CONFIG_VIDEO_TM6000=m
CONFIG_VIDEO_TM6000_ALSA=m
CONFIG_VIDEO_TM6000_DVB=m
#
# Digital TV USB devices
#
CONFIG_DVB_USB=m
# CONFIG_DVB_USB_DEBUG is not set
CONFIG_DVB_USB_A800=m
CONFIG_DVB_USB_DIBUSB_MB=m
# CONFIG_DVB_USB_DIBUSB_MB_FAULTY is not set
CONFIG_DVB_USB_DIBUSB_MC=m
CONFIG_DVB_USB_DIB0700=m
CONFIG_DVB_USB_UMT_010=m
CONFIG_DVB_USB_CXUSB=m
CONFIG_DVB_USB_M920X=m
CONFIG_DVB_USB_DIGITV=m
CONFIG_DVB_USB_VP7045=m
CONFIG_DVB_USB_VP702X=m
CONFIG_DVB_USB_GP8PSK=m
CONFIG_DVB_USB_NOVA_T_USB2=m
CONFIG_DVB_USB_TTUSB2=m
CONFIG_DVB_USB_DTT200U=m
CONFIG_DVB_USB_OPERA1=m
CONFIG_DVB_USB_AF9005=m
CONFIG_DVB_USB_AF9005_REMOTE=m
CONFIG_DVB_USB_PCTV452E=m
CONFIG_DVB_USB_DW2102=m
CONFIG_DVB_USB_CINERGY_T2=m
CONFIG_DVB_USB_DTV5100=m
CONFIG_DVB_USB_FRIIO=m
CONFIG_DVB_USB_AZ6027=m
CONFIG_DVB_USB_TECHNISAT_USB2=m
CONFIG_DVB_USB_V2=m
CONFIG_DVB_USB_AF9015=m
CONFIG_DVB_USB_AF9035=m
CONFIG_DVB_USB_ANYSEE=m
CONFIG_DVB_USB_AU6610=m
CONFIG_DVB_USB_AZ6007=m
CONFIG_DVB_USB_CE6230=m
CONFIG_DVB_USB_EC168=m
CONFIG_DVB_USB_GL861=m
CONFIG_DVB_USB_LME2510=m
CONFIG_DVB_USB_MXL111SF=m
CONFIG_DVB_USB_RTL28XXU=m
# CONFIG_DVB_USB_DVBSKY is not set
CONFIG_DVB_TTUSB_BUDGET=m
CONFIG_DVB_TTUSB_DEC=m
CONFIG_SMS_USB_DRV=m
CONFIG_DVB_B2C2_FLEXCOP_USB=m
# CONFIG_DVB_B2C2_FLEXCOP_USB_DEBUG is not set
# CONFIG_DVB_AS102 is not set
#
# Webcam, TV (analog/digital) USB devices
#
CONFIG_VIDEO_EM28XX=m
# CONFIG_VIDEO_EM28XX_V4L2 is not set
CONFIG_VIDEO_EM28XX_ALSA=m
CONFIG_VIDEO_EM28XX_DVB=m
CONFIG_VIDEO_EM28XX_RC=m
CONFIG_MEDIA_PCI_SUPPORT=y
#
# Media capture support
#
# CONFIG_VIDEO_MEYE is not set
# CONFIG_VIDEO_SOLO6X10 is not set
# CONFIG_VIDEO_TW68 is not set
# CONFIG_VIDEO_ZORAN is not set
#
# Media capture/analog TV support
#
CONFIG_VIDEO_IVTV=m
# CONFIG_VIDEO_IVTV_ALSA is not set
CONFIG_VIDEO_FB_IVTV=m
# CONFIG_VIDEO_HEXIUM_GEMINI is not set
# CONFIG_VIDEO_HEXIUM_ORION is not set
# CONFIG_VIDEO_MXB is not set
# CONFIG_VIDEO_DT3155 is not set
#
# Media capture/analog/hybrid TV support
#
CONFIG_VIDEO_CX18=m
CONFIG_VIDEO_CX18_ALSA=m
CONFIG_VIDEO_CX23885=m
CONFIG_MEDIA_ALTERA_CI=m
# CONFIG_VIDEO_CX25821 is not set
CONFIG_VIDEO_CX88=m
CONFIG_VIDEO_CX88_ALSA=m
CONFIG_VIDEO_CX88_BLACKBIRD=m
CONFIG_VIDEO_CX88_DVB=m
CONFIG_VIDEO_CX88_ENABLE_VP3054=y
CONFIG_VIDEO_CX88_VP3054=m
CONFIG_VIDEO_CX88_MPEG=m
CONFIG_VIDEO_BT848=m
CONFIG_DVB_BT8XX=m
CONFIG_VIDEO_SAA7134=m
CONFIG_VIDEO_SAA7134_ALSA=m
CONFIG_VIDEO_SAA7134_RC=y
CONFIG_VIDEO_SAA7134_DVB=m
CONFIG_VIDEO_SAA7164=m
#
# Media digital TV PCI Adapters
#
CONFIG_DVB_AV7110_IR=y
CONFIG_DVB_AV7110=m
CONFIG_DVB_AV7110_OSD=y
CONFIG_DVB_BUDGET_CORE=m
CONFIG_DVB_BUDGET=m
CONFIG_DVB_BUDGET_CI=m
CONFIG_DVB_BUDGET_AV=m
CONFIG_DVB_BUDGET_PATCH=m
CONFIG_DVB_B2C2_FLEXCOP_PCI=m
# CONFIG_DVB_B2C2_FLEXCOP_PCI_DEBUG is not set
CONFIG_DVB_PLUTO2=m
CONFIG_DVB_DM1105=m
CONFIG_DVB_PT1=m
# CONFIG_DVB_PT3 is not set
CONFIG_MANTIS_CORE=m
CONFIG_DVB_MANTIS=m
CONFIG_DVB_HOPPER=m
CONFIG_DVB_NGENE=m
CONFIG_DVB_DDBRIDGE=m
# CONFIG_DVB_SMIPCIE is not set
# CONFIG_V4L_PLATFORM_DRIVERS is not set
# CONFIG_V4L_MEM2MEM_DRIVERS is not set
# CONFIG_V4L_TEST_DRIVERS is not set
# CONFIG_DVB_PLATFORM_DRIVERS is not set
#
# Supported MMC/SDIO adapters
#
CONFIG_SMS_SDIO_DRV=m
CONFIG_RADIO_ADAPTERS=y
CONFIG_RADIO_TEA575X=m
# CONFIG_RADIO_SI470X is not set
# CONFIG_RADIO_SI4713 is not set
# CONFIG_USB_MR800 is not set
# CONFIG_USB_DSBR is not set
# CONFIG_RADIO_MAXIRADIO is not set
# CONFIG_RADIO_SHARK is not set
# CONFIG_RADIO_SHARK2 is not set
# CONFIG_USB_KEENE is not set
# CONFIG_USB_RAREMONO is not set
# CONFIG_USB_MA901 is not set
# CONFIG_RADIO_TEA5764 is not set
# CONFIG_RADIO_SAA7706H is not set
# CONFIG_RADIO_TEF6862 is not set
# CONFIG_RADIO_WL1273 is not set
#
# Texas Instruments WL128x FM driver (ST based)
#
#
# Supported FireWire (IEEE 1394) Adapters
#
CONFIG_DVB_FIREDTV=m
CONFIG_DVB_FIREDTV_INPUT=y
CONFIG_MEDIA_COMMON_OPTIONS=y
#
# common driver options
#
CONFIG_VIDEO_CX2341X=m
CONFIG_VIDEO_TVEEPROM=m
CONFIG_CYPRESS_FIRMWARE=m
CONFIG_DVB_B2C2_FLEXCOP=m
CONFIG_VIDEO_SAA7146=m
CONFIG_VIDEO_SAA7146_VV=m
CONFIG_SMS_SIANO_MDTV=m
CONFIG_SMS_SIANO_RC=y
# CONFIG_SMS_SIANO_DEBUGFS is not set
#
# Media ancillary drivers (tuners, sensors, i2c, frontends)
#
CONFIG_MEDIA_SUBDRV_AUTOSELECT=y
CONFIG_MEDIA_ATTACH=y
CONFIG_VIDEO_IR_I2C=m
#
# Audio decoders, processors and mixers
#
CONFIG_VIDEO_TVAUDIO=m
CONFIG_VIDEO_TDA7432=m
CONFIG_VIDEO_MSP3400=m
CONFIG_VIDEO_CS5345=m
CONFIG_VIDEO_CS53L32A=m
CONFIG_VIDEO_WM8775=m
CONFIG_VIDEO_WM8739=m
CONFIG_VIDEO_VP27SMPX=m
#
# RDS decoders
#
CONFIG_VIDEO_SAA6588=m
#
# Video decoders
#
CONFIG_VIDEO_SAA711X=m
#
# Video and audio decoders
#
CONFIG_VIDEO_SAA717X=m
CONFIG_VIDEO_CX25840=m
#
# Video encoders
#
CONFIG_VIDEO_SAA7127=m
#
# Camera sensor devices
#
#
# Flash devices
#
#
# Video improvement chips
#
CONFIG_VIDEO_UPD64031A=m
CONFIG_VIDEO_UPD64083=m
#
# Audio/Video compression chips
#
CONFIG_VIDEO_SAA6752HS=m
#
# Miscellaneous helper chips
#
CONFIG_VIDEO_M52790=m
#
# Sensors used on soc_camera driver
#
CONFIG_MEDIA_TUNER=m
CONFIG_MEDIA_TUNER_SIMPLE=m
CONFIG_MEDIA_TUNER_TDA8290=m
CONFIG_MEDIA_TUNER_TDA827X=m
CONFIG_MEDIA_TUNER_TDA18271=m
CONFIG_MEDIA_TUNER_TDA9887=m
CONFIG_MEDIA_TUNER_TEA5761=m
CONFIG_MEDIA_TUNER_TEA5767=m
CONFIG_MEDIA_TUNER_MT20XX=m
CONFIG_MEDIA_TUNER_MT2060=m
CONFIG_MEDIA_TUNER_MT2063=m
CONFIG_MEDIA_TUNER_MT2266=m
CONFIG_MEDIA_TUNER_MT2131=m
CONFIG_MEDIA_TUNER_QT1010=m
CONFIG_MEDIA_TUNER_XC2028=m
CONFIG_MEDIA_TUNER_XC5000=m
CONFIG_MEDIA_TUNER_XC4000=m
CONFIG_MEDIA_TUNER_MXL5005S=m
CONFIG_MEDIA_TUNER_MXL5007T=m
CONFIG_MEDIA_TUNER_MC44S803=m
CONFIG_MEDIA_TUNER_MAX2165=m
CONFIG_MEDIA_TUNER_TDA18218=m
CONFIG_MEDIA_TUNER_FC0011=m
CONFIG_MEDIA_TUNER_FC0012=m
CONFIG_MEDIA_TUNER_FC0013=m
CONFIG_MEDIA_TUNER_TDA18212=m
CONFIG_MEDIA_TUNER_E4000=m
CONFIG_MEDIA_TUNER_FC2580=m
CONFIG_MEDIA_TUNER_M88RS6000T=m
CONFIG_MEDIA_TUNER_TUA9001=m
CONFIG_MEDIA_TUNER_SI2157=m
CONFIG_MEDIA_TUNER_IT913X=m
CONFIG_MEDIA_TUNER_R820T=m
#
# Multistandard (satellite) frontends
#
CONFIG_DVB_STB0899=m
CONFIG_DVB_STB6100=m
CONFIG_DVB_STV090x=m
CONFIG_DVB_STV6110x=m
CONFIG_DVB_M88DS3103=m
#
# Multistandard (cable + terrestrial) frontends
#
CONFIG_DVB_DRXK=m
CONFIG_DVB_TDA18271C2DD=m
CONFIG_DVB_SI2165=m
#
# DVB-S (satellite) frontends
#
CONFIG_DVB_CX24110=m
CONFIG_DVB_CX24123=m
CONFIG_DVB_MT312=m
CONFIG_DVB_ZL10036=m
CONFIG_DVB_ZL10039=m
CONFIG_DVB_S5H1420=m
CONFIG_DVB_STV0288=m
CONFIG_DVB_STB6000=m
CONFIG_DVB_STV0299=m
CONFIG_DVB_STV6110=m
CONFIG_DVB_STV0900=m
CONFIG_DVB_TDA8083=m
CONFIG_DVB_TDA10086=m
CONFIG_DVB_TDA8261=m
CONFIG_DVB_VES1X93=m
CONFIG_DVB_TUNER_ITD1000=m
CONFIG_DVB_TUNER_CX24113=m
CONFIG_DVB_TDA826X=m
CONFIG_DVB_TUA6100=m
CONFIG_DVB_CX24116=m
CONFIG_DVB_CX24117=m
CONFIG_DVB_CX24120=m
CONFIG_DVB_SI21XX=m
CONFIG_DVB_TS2020=m
CONFIG_DVB_DS3000=m
CONFIG_DVB_MB86A16=m
CONFIG_DVB_TDA10071=m
#
# DVB-T (terrestrial) frontends
#
CONFIG_DVB_SP8870=m
CONFIG_DVB_SP887X=m
CONFIG_DVB_CX22700=m
CONFIG_DVB_CX22702=m
CONFIG_DVB_DRXD=m
CONFIG_DVB_L64781=m
CONFIG_DVB_TDA1004X=m
CONFIG_DVB_NXT6000=m
CONFIG_DVB_MT352=m
CONFIG_DVB_ZL10353=m
CONFIG_DVB_DIB3000MB=m
CONFIG_DVB_DIB3000MC=m
CONFIG_DVB_DIB7000M=m
CONFIG_DVB_DIB7000P=m
CONFIG_DVB_TDA10048=m
CONFIG_DVB_AF9013=m
CONFIG_DVB_EC100=m
CONFIG_DVB_STV0367=m
CONFIG_DVB_CXD2820R=m
CONFIG_DVB_RTL2830=m
CONFIG_DVB_RTL2832=m
CONFIG_DVB_SI2168=m
# CONFIG_DVB_AS102_FE is not set
#
# DVB-C (cable) frontends
#
CONFIG_DVB_VES1820=m
CONFIG_DVB_TDA10021=m
CONFIG_DVB_TDA10023=m
CONFIG_DVB_STV0297=m
#
# ATSC (North American/Korean Terrestrial/Cable DTV) frontends
#
CONFIG_DVB_NXT200X=m
CONFIG_DVB_OR51211=m
CONFIG_DVB_OR51132=m
CONFIG_DVB_BCM3510=m
CONFIG_DVB_LGDT330X=m
CONFIG_DVB_LGDT3305=m
CONFIG_DVB_LGDT3306A=m
CONFIG_DVB_LG2160=m
CONFIG_DVB_S5H1409=m
CONFIG_DVB_AU8522=m
CONFIG_DVB_AU8522_DTV=m
CONFIG_DVB_AU8522_V4L=m
CONFIG_DVB_S5H1411=m
#
# ISDB-T (terrestrial) frontends
#
CONFIG_DVB_S921=m
CONFIG_DVB_DIB8000=m
CONFIG_DVB_MB86A20S=m
#
# ISDB-S (satellite) & ISDB-T (terrestrial) frontends
#
#
# Digital terrestrial only tuners/PLL
#
CONFIG_DVB_PLL=m
CONFIG_DVB_TUNER_DIB0070=m
CONFIG_DVB_TUNER_DIB0090=m
#
# SEC control devices for DVB-S
#
CONFIG_DVB_DRX39XYJ=m
CONFIG_DVB_LNBP21=m
CONFIG_DVB_LNBP22=m
CONFIG_DVB_ISL6405=m
CONFIG_DVB_ISL6421=m
CONFIG_DVB_ISL6423=m
CONFIG_DVB_A8293=m
CONFIG_DVB_LGS8GXX=m
CONFIG_DVB_ATBM8830=m
CONFIG_DVB_TDA665x=m
CONFIG_DVB_IX2505V=m
CONFIG_DVB_M88RS2000=m
CONFIG_DVB_AF9033=m
#
# Tools to develop new frontends
#
# CONFIG_DVB_DUMMY_FE is not set
#
# Graphics support
#
CONFIG_AGP=y
CONFIG_AGP_AMD64=y
CONFIG_AGP_INTEL=y
CONFIG_AGP_SIS=y
CONFIG_AGP_VIA=y
CONFIG_INTEL_GTT=y
CONFIG_VGA_ARB=y
CONFIG_VGA_ARB_MAX_GPUS=64
CONFIG_VGA_SWITCHEROO=y
CONFIG_DRM=m
CONFIG_DRM_MIPI_DSI=y
CONFIG_DRM_KMS_HELPER=m
CONFIG_DRM_KMS_FB_HELPER=y
CONFIG_DRM_FBDEV_EMULATION=y
CONFIG_DRM_LOAD_EDID_FIRMWARE=y
CONFIG_DRM_TTM=m
#
# I2C encoder or helper chips
#
# CONFIG_DRM_I2C_ADV7511 is not set
CONFIG_DRM_I2C_CH7006=m
CONFIG_DRM_I2C_SIL164=m
CONFIG_DRM_I2C_NXP_TDA998X=m
# CONFIG_DRM_TDFX is not set
# CONFIG_DRM_R128 is not set
CONFIG_DRM_RADEON=m
# CONFIG_DRM_RADEON_USERPTR is not set
# CONFIG_DRM_RADEON_UMS is not set
# CONFIG_DRM_AMDGPU is not set
CONFIG_DRM_NOUVEAU=m
CONFIG_NOUVEAU_DEBUG=5
CONFIG_NOUVEAU_DEBUG_DEFAULT=3
CONFIG_DRM_NOUVEAU_BACKLIGHT=y
# CONFIG_DRM_I810 is not set
CONFIG_DRM_I915=m
# CONFIG_DRM_I915_PRELIMINARY_HW_SUPPORT is not set
# CONFIG_DRM_MGA is not set
# CONFIG_DRM_SIS is not set
# CONFIG_DRM_VIA is not set
# CONFIG_DRM_SAVAGE is not set
# CONFIG_DRM_VGEM is not set
CONFIG_DRM_VMWGFX=m
CONFIG_DRM_VMWGFX_FBCON=y
CONFIG_DRM_GMA500=m
CONFIG_DRM_GMA600=y
CONFIG_DRM_GMA3600=y
CONFIG_DRM_UDL=m
CONFIG_DRM_AST=m
CONFIG_DRM_MGAG200=m
CONFIG_DRM_CIRRUS_QEMU=m
CONFIG_DRM_QXL=m
CONFIG_DRM_BOCHS=m
# CONFIG_DRM_VIRTIO_GPU is not set
CONFIG_DRM_PANEL=y
#
# Display Panels
#
CONFIG_DRM_BRIDGE=y
#
# Display Interface Bridges
#
# CONFIG_HSA_AMD is not set
#
# Frame buffer Devices
#
CONFIG_FB=y
# CONFIG_FIRMWARE_EDID is not set
CONFIG_FB_CMDLINE=y
# CONFIG_FB_DDC is not set
CONFIG_FB_BOOT_VESA_SUPPORT=y
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
CONFIG_FB_SYS_FILLRECT=m
CONFIG_FB_SYS_COPYAREA=m
CONFIG_FB_SYS_IMAGEBLIT=m
# CONFIG_FB_FOREIGN_ENDIAN is not set
CONFIG_FB_SYS_FOPS=m
CONFIG_FB_DEFERRED_IO=y
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
CONFIG_FB_BACKLIGHT=y
# CONFIG_FB_MODE_HELPERS is not set
CONFIG_FB_TILEBLITTING=y
#
# Frame buffer hardware drivers
#
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ARC is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_VGA16 is not set
# CONFIG_FB_UVESA is not set
CONFIG_FB_VESA=y
CONFIG_FB_EFI=y
# CONFIG_FB_N411 is not set
# CONFIG_FB_HGA is not set
# CONFIG_FB_OPENCORES is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_I740 is not set
# CONFIG_FB_LE80578 is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_S3 is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_VT8623 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_ARK is not set
# CONFIG_FB_PM3 is not set
# CONFIG_FB_CARMINE is not set
# CONFIG_FB_SM501 is not set
# CONFIG_FB_SMSCUFX is not set
# CONFIG_FB_UDL is not set
# CONFIG_FB_IBM_GXT4500 is not set
# CONFIG_FB_VIRTUAL is not set
# CONFIG_XEN_FBDEV_FRONTEND is not set
# CONFIG_FB_METRONOME is not set
# CONFIG_FB_MB862XX is not set
# CONFIG_FB_BROADSHEET is not set
# CONFIG_FB_AUO_K190X is not set
CONFIG_FB_HYPERV=m
# CONFIG_FB_SIMPLE is not set
# CONFIG_FB_SM712 is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_LCD_CLASS_DEVICE=m
CONFIG_LCD_PLATFORM=m
CONFIG_BACKLIGHT_CLASS_DEVICE=y
# CONFIG_BACKLIGHT_GENERIC is not set
CONFIG_BACKLIGHT_APPLE=m
# CONFIG_BACKLIGHT_PM8941_WLED is not set
# CONFIG_BACKLIGHT_SAHARA is not set
# CONFIG_BACKLIGHT_ADP8860 is not set
# CONFIG_BACKLIGHT_ADP8870 is not set
# CONFIG_BACKLIGHT_LM3639 is not set
# CONFIG_BACKLIGHT_LV5207LP is not set
# CONFIG_BACKLIGHT_BD6107 is not set
# CONFIG_VGASTATE is not set
CONFIG_HDMI=y
#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
CONFIG_VGACON_SOFT_SCROLLBACK=y
CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64
CONFIG_DUMMY_CONSOLE=y
CONFIG_DUMMY_CONSOLE_COLUMNS=80
CONFIG_DUMMY_CONSOLE_ROWS=25
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
CONFIG_LOGO_LINUX_CLUT224=y
CONFIG_SOUND=m
CONFIG_SOUND_OSS_CORE=y
CONFIG_SOUND_OSS_CORE_PRECLAIM=y
CONFIG_SND=m
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
CONFIG_SND_HWDEP=m
CONFIG_SND_RAWMIDI=m
CONFIG_SND_JACK=y
CONFIG_SND_SEQUENCER=m
CONFIG_SND_SEQ_DUMMY=m
CONFIG_SND_OSSEMUL=y
# CONFIG_SND_MIXER_OSS is not set
# CONFIG_SND_PCM_OSS is not set
CONFIG_SND_PCM_TIMER=y
CONFIG_SND_SEQUENCER_OSS=y
CONFIG_SND_HRTIMER=m
CONFIG_SND_SEQ_HRTIMER_DEFAULT=y
CONFIG_SND_DYNAMIC_MINORS=y
CONFIG_SND_MAX_CARDS=32
# CONFIG_SND_SUPPORT_OLD_API is not set
CONFIG_SND_PROC_FS=y
CONFIG_SND_VERBOSE_PROCFS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
CONFIG_SND_VMASTER=y
CONFIG_SND_DMA_SGBUF=y
CONFIG_SND_RAWMIDI_SEQ=m
CONFIG_SND_OPL3_LIB_SEQ=m
# CONFIG_SND_OPL4_LIB_SEQ is not set
# CONFIG_SND_SBAWE_SEQ is not set
CONFIG_SND_EMU10K1_SEQ=m
CONFIG_SND_MPU401_UART=m
CONFIG_SND_OPL3_LIB=m
CONFIG_SND_VX_LIB=m
CONFIG_SND_AC97_CODEC=m
CONFIG_SND_DRIVERS=y
CONFIG_SND_PCSP=m
CONFIG_SND_DUMMY=m
CONFIG_SND_ALOOP=m
CONFIG_SND_VIRMIDI=m
CONFIG_SND_MTPAV=m
# CONFIG_SND_MTS64 is not set
# CONFIG_SND_SERIAL_U16550 is not set
CONFIG_SND_MPU401=m
# CONFIG_SND_PORTMAN2X4 is not set
CONFIG_SND_AC97_POWER_SAVE=y
CONFIG_SND_AC97_POWER_SAVE_DEFAULT=5
CONFIG_SND_PCI=y
CONFIG_SND_AD1889=m
# CONFIG_SND_ALS300 is not set
# CONFIG_SND_ALS4000 is not set
CONFIG_SND_ALI5451=m
CONFIG_SND_ASIHPI=m
CONFIG_SND_ATIIXP=m
CONFIG_SND_ATIIXP_MODEM=m
CONFIG_SND_AU8810=m
CONFIG_SND_AU8820=m
CONFIG_SND_AU8830=m
# CONFIG_SND_AW2 is not set
# CONFIG_SND_AZT3328 is not set
CONFIG_SND_BT87X=m
# CONFIG_SND_BT87X_OVERCLOCK is not set
CONFIG_SND_CA0106=m
CONFIG_SND_CMIPCI=m
CONFIG_SND_OXYGEN_LIB=m
CONFIG_SND_OXYGEN=m
# CONFIG_SND_CS4281 is not set
CONFIG_SND_CS46XX=m
CONFIG_SND_CS46XX_NEW_DSP=y
CONFIG_SND_CTXFI=m
CONFIG_SND_DARLA20=m
CONFIG_SND_GINA20=m
CONFIG_SND_LAYLA20=m
CONFIG_SND_DARLA24=m
CONFIG_SND_GINA24=m
CONFIG_SND_LAYLA24=m
CONFIG_SND_MONA=m
CONFIG_SND_MIA=m
CONFIG_SND_ECHO3G=m
CONFIG_SND_INDIGO=m
CONFIG_SND_INDIGOIO=m
CONFIG_SND_INDIGODJ=m
CONFIG_SND_INDIGOIOX=m
CONFIG_SND_INDIGODJX=m
CONFIG_SND_EMU10K1=m
CONFIG_SND_EMU10K1X=m
CONFIG_SND_ENS1370=m
CONFIG_SND_ENS1371=m
# CONFIG_SND_ES1938 is not set
CONFIG_SND_ES1968=m
CONFIG_SND_ES1968_INPUT=y
CONFIG_SND_ES1968_RADIO=y
# CONFIG_SND_FM801 is not set
CONFIG_SND_HDSP=m
CONFIG_SND_HDSPM=m
CONFIG_SND_ICE1712=m
CONFIG_SND_ICE1724=m
CONFIG_SND_INTEL8X0=m
CONFIG_SND_INTEL8X0M=m
CONFIG_SND_KORG1212=m
CONFIG_SND_LOLA=m
CONFIG_SND_LX6464ES=m
CONFIG_SND_MAESTRO3=m
CONFIG_SND_MAESTRO3_INPUT=y
CONFIG_SND_MIXART=m
# CONFIG_SND_NM256 is not set
CONFIG_SND_PCXHR=m
# CONFIG_SND_RIPTIDE is not set
CONFIG_SND_RME32=m
CONFIG_SND_RME96=m
CONFIG_SND_RME9652=m
# CONFIG_SND_SONICVIBES is not set
CONFIG_SND_TRIDENT=m
CONFIG_SND_VIA82XX=m
CONFIG_SND_VIA82XX_MODEM=m
CONFIG_SND_VIRTUOSO=m
CONFIG_SND_VX222=m
# CONFIG_SND_YMFPCI is not set
#
# HD-Audio
#
CONFIG_SND_HDA=m
CONFIG_SND_HDA_INTEL=m
CONFIG_SND_HDA_HWDEP=y
CONFIG_SND_HDA_RECONFIG=y
CONFIG_SND_HDA_INPUT_BEEP=y
CONFIG_SND_HDA_INPUT_BEEP_MODE=0
CONFIG_SND_HDA_PATCH_LOADER=y
CONFIG_SND_HDA_CODEC_REALTEK=m
CONFIG_SND_HDA_CODEC_ANALOG=m
CONFIG_SND_HDA_CODEC_SIGMATEL=m
CONFIG_SND_HDA_CODEC_VIA=m
CONFIG_SND_HDA_CODEC_HDMI=m
CONFIG_SND_HDA_CODEC_CIRRUS=m
CONFIG_SND_HDA_CODEC_CONEXANT=m
CONFIG_SND_HDA_CODEC_CA0110=m
CONFIG_SND_HDA_CODEC_CA0132=m
CONFIG_SND_HDA_CODEC_CA0132_DSP=y
CONFIG_SND_HDA_CODEC_CMEDIA=m
CONFIG_SND_HDA_CODEC_SI3054=m
CONFIG_SND_HDA_GENERIC=m
CONFIG_SND_HDA_POWER_SAVE_DEFAULT=0
CONFIG_SND_HDA_CORE=m
CONFIG_SND_HDA_DSP_LOADER=y
CONFIG_SND_HDA_I915=y
CONFIG_SND_HDA_PREALLOC_SIZE=512
CONFIG_SND_USB=y
CONFIG_SND_USB_AUDIO=m
CONFIG_SND_USB_UA101=m
CONFIG_SND_USB_USX2Y=m
CONFIG_SND_USB_CAIAQ=m
CONFIG_SND_USB_CAIAQ_INPUT=y
CONFIG_SND_USB_US122L=m
CONFIG_SND_USB_6FIRE=m
# CONFIG_SND_USB_HIFACE is not set
# CONFIG_SND_BCD2000 is not set
# CONFIG_SND_USB_POD is not set
# CONFIG_SND_USB_PODHD is not set
# CONFIG_SND_USB_TONEPORT is not set
# CONFIG_SND_USB_VARIAX is not set
CONFIG_SND_FIREWIRE=y
CONFIG_SND_FIREWIRE_LIB=m
# CONFIG_SND_DICE is not set
# CONFIG_SND_OXFW is not set
CONFIG_SND_ISIGHT=m
CONFIG_SND_SCS1X=m
# CONFIG_SND_FIREWORKS is not set
# CONFIG_SND_BEBOB is not set
# CONFIG_SND_FIREWIRE_DIGI00X is not set
# CONFIG_SND_FIREWIRE_TASCAM is not set
# CONFIG_SND_SOC is not set
# CONFIG_SOUND_PRIME is not set
CONFIG_AC97_BUS=m
#
# HID support
#
CONFIG_HID=y
CONFIG_HID_BATTERY_STRENGTH=y
CONFIG_HIDRAW=y
CONFIG_UHID=m
CONFIG_HID_GENERIC=y
#
# Special HID drivers
#
CONFIG_HID_A4TECH=y
CONFIG_HID_ACRUX=m
# CONFIG_HID_ACRUX_FF is not set
CONFIG_HID_APPLE=y
CONFIG_HID_APPLEIR=m
CONFIG_HID_AUREAL=m
CONFIG_HID_BELKIN=y
# CONFIG_HID_BETOP_FF is not set
CONFIG_HID_CHERRY=y
CONFIG_HID_CHICONY=y
# CONFIG_HID_CORSAIR is not set
CONFIG_HID_PRODIKEYS=m
CONFIG_HID_CYPRESS=y
CONFIG_HID_DRAGONRISE=m
# CONFIG_DRAGONRISE_FF is not set
# CONFIG_HID_EMS_FF is not set
CONFIG_HID_ELECOM=m
# CONFIG_HID_ELO is not set
CONFIG_HID_EZKEY=y
# CONFIG_HID_GEMBIRD is not set
# CONFIG_HID_GFRM is not set
CONFIG_HID_HOLTEK=m
# CONFIG_HOLTEK_FF is not set
# CONFIG_HID_GT683R is not set
CONFIG_HID_KEYTOUCH=m
CONFIG_HID_KYE=m
CONFIG_HID_UCLOGIC=m
CONFIG_HID_WALTOP=m
CONFIG_HID_GYRATION=m
CONFIG_HID_ICADE=m
CONFIG_HID_TWINHAN=m
CONFIG_HID_KENSINGTON=y
CONFIG_HID_LCPOWER=m
# CONFIG_HID_LENOVO is not set
CONFIG_HID_LOGITECH=y
CONFIG_HID_LOGITECH_DJ=m
CONFIG_HID_LOGITECH_HIDPP=m
# CONFIG_LOGITECH_FF is not set
# CONFIG_LOGIRUMBLEPAD2_FF is not set
# CONFIG_LOGIG940_FF is not set
# CONFIG_LOGIWHEELS_FF is not set
CONFIG_HID_MAGICMOUSE=y
CONFIG_HID_MICROSOFT=y
CONFIG_HID_MONTEREY=y
CONFIG_HID_MULTITOUCH=m
CONFIG_HID_NTRIG=y
CONFIG_HID_ORTEK=m
CONFIG_HID_PANTHERLORD=m
# CONFIG_PANTHERLORD_FF is not set
# CONFIG_HID_PENMOUNT is not set
CONFIG_HID_PETALYNX=m
CONFIG_HID_PICOLCD=m
CONFIG_HID_PICOLCD_FB=y
CONFIG_HID_PICOLCD_BACKLIGHT=y
CONFIG_HID_PICOLCD_LCD=y
CONFIG_HID_PICOLCD_LEDS=y
CONFIG_HID_PICOLCD_CIR=y
# CONFIG_HID_PLANTRONICS is not set
CONFIG_HID_PRIMAX=m
CONFIG_HID_ROCCAT=m
CONFIG_HID_SAITEK=m
CONFIG_HID_SAMSUNG=m
CONFIG_HID_SONY=m
# CONFIG_SONY_FF is not set
CONFIG_HID_SPEEDLINK=m
CONFIG_HID_STEELSERIES=m
CONFIG_HID_SUNPLUS=m
CONFIG_HID_RMI=m
CONFIG_HID_GREENASIA=m
# CONFIG_GREENASIA_FF is not set
CONFIG_HID_HYPERV_MOUSE=m
CONFIG_HID_SMARTJOYPLUS=m
# CONFIG_SMARTJOYPLUS_FF is not set
CONFIG_HID_TIVO=m
CONFIG_HID_TOPSEED=m
CONFIG_HID_THINGM=m
CONFIG_HID_THRUSTMASTER=m
# CONFIG_THRUSTMASTER_FF is not set
CONFIG_HID_WACOM=m
CONFIG_HID_WIIMOTE=m
# CONFIG_HID_XINMO is not set
CONFIG_HID_ZEROPLUS=m
# CONFIG_ZEROPLUS_FF is not set
CONFIG_HID_ZYDACRON=m
# CONFIG_HID_SENSOR_HUB is not set
#
# USB HID support
#
CONFIG_USB_HID=y
CONFIG_HID_PID=y
CONFIG_USB_HIDDEV=y
#
# I2C HID support
#
CONFIG_I2C_HID=m
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_COMMON=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB=y
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
#
# Miscellaneous USB options
#
CONFIG_USB_DEFAULT_PERSIST=y
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_OTG is not set
# CONFIG_USB_OTG_WHITELIST is not set
# CONFIG_USB_ULPI_BUS is not set
CONFIG_USB_MON=y
CONFIG_USB_WUSB=m
CONFIG_USB_WUSB_CBAF=m
# CONFIG_USB_WUSB_CBAF_DEBUG is not set
#
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
CONFIG_USB_XHCI_HCD=y
CONFIG_USB_XHCI_PCI=y
# CONFIG_USB_XHCI_PLATFORM is not set
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
CONFIG_USB_EHCI_TT_NEWSCHED=y
CONFIG_USB_EHCI_PCI=y
# CONFIG_USB_EHCI_HCD_PLATFORM is not set
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1362_HCD is not set
# CONFIG_USB_FOTG210_HCD is not set
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_OHCI_HCD_PCI=y
# CONFIG_USB_OHCI_HCD_PLATFORM is not set
CONFIG_USB_UHCI_HCD=y
# CONFIG_USB_U132_HCD is not set
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
# CONFIG_USB_WHCI_HCD is not set
CONFIG_USB_HWA_HCD=m
# CONFIG_USB_HCD_BCMA is not set
# CONFIG_USB_HCD_SSB is not set
# CONFIG_USB_HCD_TEST_MODE is not set
#
# USB Device Class drivers
#
CONFIG_USB_ACM=m
CONFIG_USB_PRINTER=m
CONFIG_USB_WDM=m
CONFIG_USB_TMC=m
#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
#
# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
CONFIG_USB_STORAGE_REALTEK=m
CONFIG_REALTEK_AUTOPM=y
CONFIG_USB_STORAGE_DATAFAB=m
CONFIG_USB_STORAGE_FREECOM=m
CONFIG_USB_STORAGE_ISD200=m
CONFIG_USB_STORAGE_USBAT=m
CONFIG_USB_STORAGE_SDDR09=m
CONFIG_USB_STORAGE_SDDR55=m
CONFIG_USB_STORAGE_JUMPSHOT=m
CONFIG_USB_STORAGE_ALAUDA=m
CONFIG_USB_STORAGE_ONETOUCH=m
CONFIG_USB_STORAGE_KARMA=m
CONFIG_USB_STORAGE_CYPRESS_ATACB=m
CONFIG_USB_STORAGE_ENE_UB6250=m
# CONFIG_USB_UAS is not set
#
# USB Imaging devices
#
CONFIG_USB_MDC800=m
CONFIG_USB_MICROTEK=m
# CONFIG_USBIP_CORE is not set
# CONFIG_USB_MUSB_HDRC is not set
# CONFIG_USB_DWC3 is not set
# CONFIG_USB_DWC2 is not set
# CONFIG_USB_CHIPIDEA is not set
# CONFIG_USB_ISP1760 is not set
#
# USB port drivers
#
CONFIG_USB_USS720=m
CONFIG_USB_SERIAL=y
CONFIG_USB_SERIAL_CONSOLE=y
CONFIG_USB_SERIAL_GENERIC=y
# CONFIG_USB_SERIAL_SIMPLE is not set
CONFIG_USB_SERIAL_AIRCABLE=m
CONFIG_USB_SERIAL_ARK3116=m
CONFIG_USB_SERIAL_BELKIN=m
CONFIG_USB_SERIAL_CH341=m
CONFIG_USB_SERIAL_WHITEHEAT=m
CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
CONFIG_USB_SERIAL_CP210X=m
CONFIG_USB_SERIAL_CYPRESS_M8=m
CONFIG_USB_SERIAL_EMPEG=m
CONFIG_USB_SERIAL_FTDI_SIO=m
CONFIG_USB_SERIAL_VISOR=m
CONFIG_USB_SERIAL_IPAQ=m
CONFIG_USB_SERIAL_IR=m
CONFIG_USB_SERIAL_EDGEPORT=m
CONFIG_USB_SERIAL_EDGEPORT_TI=m
# CONFIG_USB_SERIAL_F81232 is not set
CONFIG_USB_SERIAL_GARMIN=m
CONFIG_USB_SERIAL_IPW=m
CONFIG_USB_SERIAL_IUU=m
CONFIG_USB_SERIAL_KEYSPAN_PDA=m
CONFIG_USB_SERIAL_KEYSPAN=m
CONFIG_USB_SERIAL_KLSI=m
CONFIG_USB_SERIAL_KOBIL_SCT=m
CONFIG_USB_SERIAL_MCT_U232=m
# CONFIG_USB_SERIAL_METRO is not set
CONFIG_USB_SERIAL_MOS7720=m
CONFIG_USB_SERIAL_MOS7715_PARPORT=y
CONFIG_USB_SERIAL_MOS7840=m
# CONFIG_USB_SERIAL_MXUPORT is not set
CONFIG_USB_SERIAL_NAVMAN=m
CONFIG_USB_SERIAL_PL2303=m
CONFIG_USB_SERIAL_OTI6858=m
CONFIG_USB_SERIAL_QCAUX=m
CONFIG_USB_SERIAL_QUALCOMM=m
CONFIG_USB_SERIAL_SPCP8X5=m
CONFIG_USB_SERIAL_SAFE=m
CONFIG_USB_SERIAL_SAFE_PADDED=y
CONFIG_USB_SERIAL_SIERRAWIRELESS=m
CONFIG_USB_SERIAL_SYMBOL=m
CONFIG_USB_SERIAL_TI=m
CONFIG_USB_SERIAL_CYBERJACK=m
CONFIG_USB_SERIAL_XIRCOM=m
CONFIG_USB_SERIAL_WWAN=m
CONFIG_USB_SERIAL_OPTION=m
CONFIG_USB_SERIAL_OMNINET=m
CONFIG_USB_SERIAL_OPTICON=m
CONFIG_USB_SERIAL_XSENS_MT=m
# CONFIG_USB_SERIAL_WISHBONE is not set
CONFIG_USB_SERIAL_SSU100=m
CONFIG_USB_SERIAL_QT2=m
CONFIG_USB_SERIAL_DEBUG=m
#
# USB Miscellaneous drivers
#
CONFIG_USB_EMI62=m
CONFIG_USB_EMI26=m
CONFIG_USB_ADUTUX=m
CONFIG_USB_SEVSEG=m
# CONFIG_USB_RIO500 is not set
CONFIG_USB_LEGOTOWER=m
CONFIG_USB_LCD=m
CONFIG_USB_LED=m
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
CONFIG_USB_IDMOUSE=m
CONFIG_USB_FTDI_ELAN=m
CONFIG_USB_APPLEDISPLAY=m
CONFIG_USB_SISUSBVGA=m
CONFIG_USB_SISUSBVGA_CON=y
CONFIG_USB_LD=m
# CONFIG_USB_TRANCEVIBRATOR is not set
CONFIG_USB_IOWARRIOR=m
# CONFIG_USB_TEST is not set
# CONFIG_USB_EHSET_TEST_FIXTURE is not set
CONFIG_USB_ISIGHTFW=m
# CONFIG_USB_YUREX is not set
CONFIG_USB_EZUSB_FX2=m
CONFIG_USB_HSIC_USB3503=m
# CONFIG_USB_LINK_LAYER_TEST is not set
# CONFIG_USB_CHAOSKEY is not set
CONFIG_USB_ATM=m
CONFIG_USB_SPEEDTOUCH=m
CONFIG_USB_CXACRU=m
CONFIG_USB_UEAGLEATM=m
CONFIG_USB_XUSBATM=m
#
# USB Physical Layer drivers
#
# CONFIG_USB_PHY is not set
# CONFIG_NOP_USB_XCEIV is not set
# CONFIG_USB_ISP1301 is not set
# CONFIG_USB_GADGET is not set
# CONFIG_USB_LED_TRIG is not set
CONFIG_UWB=m
CONFIG_UWB_HWA=m
CONFIG_UWB_WHCI=m
CONFIG_UWB_I1480U=m
CONFIG_MMC=m
# CONFIG_MMC_DEBUG is not set
#
# MMC/SD/SDIO Card Drivers
#
CONFIG_MMC_BLOCK=m
CONFIG_MMC_BLOCK_MINORS=8
CONFIG_MMC_BLOCK_BOUNCE=y
CONFIG_SDIO_UART=m
# CONFIG_MMC_TEST is not set
#
# MMC/SD/SDIO Host Controller Drivers
#
CONFIG_MMC_SDHCI=m
CONFIG_MMC_SDHCI_PCI=m
CONFIG_MMC_RICOH_MMC=y
CONFIG_MMC_SDHCI_ACPI=m
CONFIG_MMC_SDHCI_PLTFM=m
# CONFIG_MMC_WBSD is not set
CONFIG_MMC_TIFM_SD=m
CONFIG_MMC_CB710=m
CONFIG_MMC_VIA_SDMMC=m
CONFIG_MMC_VUB300=m
CONFIG_MMC_USHC=m
# CONFIG_MMC_USDHI6ROL0 is not set
CONFIG_MMC_REALTEK_PCI=m
# CONFIG_MMC_TOSHIBA_PCI is not set
# CONFIG_MMC_MTK is not set
CONFIG_MEMSTICK=m
# CONFIG_MEMSTICK_DEBUG is not set
#
# MemoryStick drivers
#
# CONFIG_MEMSTICK_UNSAFE_RESUME is not set
CONFIG_MSPRO_BLOCK=m
# CONFIG_MS_BLOCK is not set
#
# MemoryStick Host Controller Drivers
#
CONFIG_MEMSTICK_TIFM_MS=m
CONFIG_MEMSTICK_JMICRON_38X=m
CONFIG_MEMSTICK_R592=m
CONFIG_MEMSTICK_REALTEK_PCI=m
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
# CONFIG_LEDS_CLASS_FLASH is not set
#
# LED drivers
#
CONFIG_LEDS_LM3530=m
# CONFIG_LEDS_LM3642 is not set
# CONFIG_LEDS_PCA9532 is not set
CONFIG_LEDS_LP3944=m
CONFIG_LEDS_LP55XX_COMMON=m
CONFIG_LEDS_LP5521=m
CONFIG_LEDS_LP5523=m
CONFIG_LEDS_LP5562=m
# CONFIG_LEDS_LP8501 is not set
# CONFIG_LEDS_LP8860 is not set
CONFIG_LEDS_CLEVO_MAIL=m
# CONFIG_LEDS_PCA955X is not set
# CONFIG_LEDS_PCA963X is not set
# CONFIG_LEDS_BD2802 is not set
CONFIG_LEDS_INTEL_SS4200=m
CONFIG_LEDS_DELL_NETBOOKS=m
# CONFIG_LEDS_TCA6507 is not set
# CONFIG_LEDS_TLC591XX is not set
# CONFIG_LEDS_LM355x is not set
#
# LED driver for blink(1) USB RGB LED is under Special HID drivers (HID_THINGM)
#
CONFIG_LEDS_BLINKM=m
#
# LED Triggers
#
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=m
CONFIG_LEDS_TRIGGER_ONESHOT=m
CONFIG_LEDS_TRIGGER_HEARTBEAT=m
CONFIG_LEDS_TRIGGER_BACKLIGHT=m
# CONFIG_LEDS_TRIGGER_CPU is not set
CONFIG_LEDS_TRIGGER_DEFAULT_ON=m
#
# iptables trigger is under Netfilter config (LED target)
#
CONFIG_LEDS_TRIGGER_TRANSIENT=m
CONFIG_LEDS_TRIGGER_CAMERA=m
# CONFIG_ACCESSIBILITY is not set
CONFIG_INFINIBAND=m
CONFIG_INFINIBAND_USER_MAD=m
CONFIG_INFINIBAND_USER_ACCESS=m
CONFIG_INFINIBAND_USER_MEM=y
CONFIG_INFINIBAND_ON_DEMAND_PAGING=y
CONFIG_INFINIBAND_ADDR_TRANS=y
CONFIG_INFINIBAND_MTHCA=m
CONFIG_INFINIBAND_MTHCA_DEBUG=y
CONFIG_INFINIBAND_QIB=m
CONFIG_INFINIBAND_QIB_DCA=y
CONFIG_INFINIBAND_CXGB3=m
# CONFIG_INFINIBAND_CXGB3_DEBUG is not set
CONFIG_INFINIBAND_CXGB4=m
CONFIG_MLX4_INFINIBAND=m
CONFIG_MLX5_INFINIBAND=m
CONFIG_INFINIBAND_NES=m
# CONFIG_INFINIBAND_NES_DEBUG is not set
CONFIG_INFINIBAND_OCRDMA=m
CONFIG_INFINIBAND_USNIC=m
CONFIG_INFINIBAND_IPOIB=m
CONFIG_INFINIBAND_IPOIB_CM=y
CONFIG_INFINIBAND_IPOIB_DEBUG=y
# CONFIG_INFINIBAND_IPOIB_DEBUG_DATA is not set
CONFIG_INFINIBAND_SRP=m
CONFIG_INFINIBAND_SRPT=m
CONFIG_INFINIBAND_ISER=m
CONFIG_INFINIBAND_ISERT=m
CONFIG_EDAC_ATOMIC_SCRUB=y
CONFIG_EDAC_SUPPORT=y
CONFIG_EDAC=y
CONFIG_EDAC_LEGACY_SYSFS=y
# CONFIG_EDAC_DEBUG is not set
CONFIG_EDAC_DECODE_MCE=m
CONFIG_EDAC_MM_EDAC=m
CONFIG_EDAC_AMD64=m
# CONFIG_EDAC_AMD64_ERROR_INJECTION is not set
CONFIG_EDAC_E752X=m
CONFIG_EDAC_I82975X=m
CONFIG_EDAC_I3000=m
CONFIG_EDAC_I3200=m
CONFIG_EDAC_IE31200=m
CONFIG_EDAC_X38=m
CONFIG_EDAC_I5400=m
CONFIG_EDAC_I7CORE=m
CONFIG_EDAC_I5000=m
CONFIG_EDAC_I5100=m
CONFIG_EDAC_I7300=m
CONFIG_EDAC_SBRIDGE=m
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
# CONFIG_RTC_SYSTOHC is not set
# CONFIG_RTC_DEBUG is not set
#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
# CONFIG_RTC_DRV_TEST is not set
#
# I2C RTC drivers
#
# CONFIG_RTC_DRV_ABB5ZES3 is not set
# CONFIG_RTC_DRV_ABX80X is not set
CONFIG_RTC_DRV_DS1307=m
CONFIG_RTC_DRV_DS1374=m
# CONFIG_RTC_DRV_DS1374_WDT is not set
CONFIG_RTC_DRV_DS1672=m
CONFIG_RTC_DRV_DS3232=m
CONFIG_RTC_DRV_MAX6900=m
CONFIG_RTC_DRV_RS5C372=m
CONFIG_RTC_DRV_ISL1208=m
CONFIG_RTC_DRV_ISL12022=m
# CONFIG_RTC_DRV_ISL12057 is not set
CONFIG_RTC_DRV_X1205=m
# CONFIG_RTC_DRV_PCF2127 is not set
CONFIG_RTC_DRV_PCF8523=m
CONFIG_RTC_DRV_PCF8563=m
# CONFIG_RTC_DRV_PCF85063 is not set
CONFIG_RTC_DRV_PCF8583=m
CONFIG_RTC_DRV_M41T80=m
CONFIG_RTC_DRV_M41T80_WDT=y
CONFIG_RTC_DRV_BQ32K=m
# CONFIG_RTC_DRV_S35390A is not set
CONFIG_RTC_DRV_FM3130=m
CONFIG_RTC_DRV_RX8581=m
CONFIG_RTC_DRV_RX8025=m
CONFIG_RTC_DRV_EM3027=m
CONFIG_RTC_DRV_RV3029C2=m
# CONFIG_RTC_DRV_RV8803 is not set
#
# SPI RTC drivers
#
#
# Platform RTC drivers
#
CONFIG_RTC_DRV_CMOS=y
CONFIG_RTC_DRV_DS1286=m
CONFIG_RTC_DRV_DS1511=m
CONFIG_RTC_DRV_DS1553=m
# CONFIG_RTC_DRV_DS1685_FAMILY is not set
CONFIG_RTC_DRV_DS1742=m
CONFIG_RTC_DRV_DS2404=m
CONFIG_RTC_DRV_STK17TA8=m
# CONFIG_RTC_DRV_M48T86 is not set
CONFIG_RTC_DRV_M48T35=m
CONFIG_RTC_DRV_M48T59=m
CONFIG_RTC_DRV_MSM6242=m
CONFIG_RTC_DRV_BQ4802=m
CONFIG_RTC_DRV_RP5C01=m
CONFIG_RTC_DRV_V3020=m
#
# on-CPU RTC drivers
#
#
# HID Sensor RTC drivers
#
# CONFIG_RTC_DRV_HID_SENSOR_TIME is not set
CONFIG_DMADEVICES=y
# CONFIG_DMADEVICES_DEBUG is not set
#
# DMA Devices
#
CONFIG_DMA_ENGINE=y
CONFIG_DMA_ACPI=y
# CONFIG_INTEL_IDMA64 is not set
CONFIG_INTEL_IOATDMA=m
CONFIG_DW_DMAC_CORE=m
CONFIG_DW_DMAC=m
# CONFIG_DW_DMAC_PCI is not set
#
# DMA Clients
#
CONFIG_ASYNC_TX_DMA=y
# CONFIG_DMATEST is not set
CONFIG_DMA_ENGINE_RAID=y
CONFIG_DCA=m
CONFIG_AUXDISPLAY=y
CONFIG_KS0108=m
CONFIG_KS0108_PORT=0x378
CONFIG_KS0108_DELAY=2
CONFIG_CFAG12864B=m
CONFIG_CFAG12864B_RATE=20
CONFIG_UIO=m
CONFIG_UIO_CIF=m
CONFIG_UIO_PDRV_GENIRQ=m
# CONFIG_UIO_DMEM_GENIRQ is not set
CONFIG_UIO_AEC=m
CONFIG_UIO_SERCOS3=m
CONFIG_UIO_PCI_GENERIC=m
# CONFIG_UIO_NETX is not set
# CONFIG_UIO_PRUSS is not set
# CONFIG_UIO_MF624 is not set
CONFIG_VFIO_IOMMU_TYPE1=m
CONFIG_VFIO_VIRQFD=m
CONFIG_VFIO=m
CONFIG_VFIO_PCI=m
# CONFIG_VFIO_PCI_VGA is not set
CONFIG_VFIO_PCI_MMAP=y
CONFIG_VFIO_PCI_INTX=y
CONFIG_IRQ_BYPASS_MANAGER=m
# CONFIG_VIRT_DRIVERS is not set
CONFIG_VIRTIO=m
#
# Virtio drivers
#
CONFIG_VIRTIO_PCI=m
CONFIG_VIRTIO_PCI_LEGACY=y
CONFIG_VIRTIO_BALLOON=m
CONFIG_VIRTIO_INPUT=m
# CONFIG_VIRTIO_MMIO is not set
#
# Microsoft Hyper-V guest support
#
CONFIG_HYPERV=m
CONFIG_HYPERV_UTILS=m
CONFIG_HYPERV_BALLOON=m
#
# Xen driver support
#
CONFIG_XEN_BALLOON=y
# CONFIG_XEN_SELFBALLOONING is not set
# CONFIG_XEN_BALLOON_MEMORY_HOTPLUG is not set
CONFIG_XEN_SCRUB_PAGES=y
CONFIG_XEN_DEV_EVTCHN=m
CONFIG_XEN_BACKEND=y
CONFIG_XENFS=m
CONFIG_XEN_COMPAT_XENFS=y
CONFIG_XEN_SYS_HYPERVISOR=y
CONFIG_XEN_XENBUS_FRONTEND=y
# CONFIG_XEN_GNTDEV is not set
# CONFIG_XEN_GRANT_DEV_ALLOC is not set
CONFIG_SWIOTLB_XEN=y
CONFIG_XEN_TMEM=m
CONFIG_XEN_PCIDEV_BACKEND=m
# CONFIG_XEN_SCSI_BACKEND is not set
CONFIG_XEN_PRIVCMD=m
CONFIG_XEN_ACPI_PROCESSOR=m
# CONFIG_XEN_MCE_LOG is not set
CONFIG_XEN_HAVE_PVMMU=y
CONFIG_XEN_EFI=y
CONFIG_XEN_AUTO_XLATE=y
CONFIG_XEN_ACPI=y
CONFIG_XEN_SYMS=y
CONFIG_XEN_HAVE_VPMU=y
CONFIG_STAGING=y
# CONFIG_SLICOSS is not set
# CONFIG_PRISM2_USB is not set
# CONFIG_COMEDI is not set
# CONFIG_PANEL is not set
# CONFIG_RTL8192U is not set
CONFIG_RTLLIB=m
CONFIG_RTLLIB_CRYPTO_CCMP=m
CONFIG_RTLLIB_CRYPTO_TKIP=m
CONFIG_RTLLIB_CRYPTO_WEP=m
CONFIG_RTL8192E=m
CONFIG_R8712U=m
# CONFIG_R8188EU is not set
# CONFIG_R8723AU is not set
# CONFIG_RTS5208 is not set
# CONFIG_VT6655 is not set
# CONFIG_VT6656 is not set
# CONFIG_FB_SM750 is not set
# CONFIG_FB_XGI is not set
#
# Speakup console speech
#
# CONFIG_SPEAKUP is not set
# CONFIG_TOUCHSCREEN_SYNAPTICS_I2C_RMI4 is not set
# CONFIG_STAGING_MEDIA is not set
# CONFIG_STAGING_RDMA is not set
#
# Android
#
# CONFIG_WIMAX_GDM72XX is not set
# CONFIG_LTE_GDM724X is not set
CONFIG_FIREWIRE_SERIAL=m
CONFIG_FWTTY_MAX_TOTAL_PORTS=64
CONFIG_FWTTY_MAX_CARD_PORTS=32
# CONFIG_LUSTRE_FS is not set
# CONFIG_DGNC is not set
# CONFIG_DGAP is not set
# CONFIG_GS_FPGABOOT is not set
# CONFIG_CRYPTO_SKEIN is not set
CONFIG_UNISYSSPAR=y
CONFIG_UNISYS_VISORBUS=m
CONFIG_UNISYS_VISORNIC=m
# CONFIG_UNISYS_VISORINPUT is not set
CONFIG_UNISYS_VISORHBA=m
# CONFIG_WILC1000_DRIVER is not set
# CONFIG_MOST is not set
CONFIG_X86_PLATFORM_DEVICES=y
CONFIG_ACER_WMI=m
CONFIG_ACERHDF=m
# CONFIG_ALIENWARE_WMI is not set
CONFIG_ASUS_LAPTOP=m
CONFIG_DELL_LAPTOP=m
CONFIG_DELL_WMI=m
CONFIG_DELL_WMI_AIO=m
# CONFIG_DELL_SMO8800 is not set
# CONFIG_DELL_RBTN is not set
CONFIG_FUJITSU_LAPTOP=m
# CONFIG_FUJITSU_LAPTOP_DEBUG is not set
CONFIG_FUJITSU_TABLET=m
CONFIG_AMILO_RFKILL=m
CONFIG_HP_ACCEL=m
CONFIG_HP_WIRELESS=m
CONFIG_HP_WMI=m
CONFIG_MSI_LAPTOP=m
CONFIG_PANASONIC_LAPTOP=m
CONFIG_COMPAL_LAPTOP=m
CONFIG_SONY_LAPTOP=m
CONFIG_SONYPI_COMPAT=y
CONFIG_IDEAPAD_LAPTOP=m
CONFIG_THINKPAD_ACPI=m
CONFIG_THINKPAD_ACPI_ALSA_SUPPORT=y
# CONFIG_THINKPAD_ACPI_DEBUGFACILITIES is not set
# CONFIG_THINKPAD_ACPI_DEBUG is not set
# CONFIG_THINKPAD_ACPI_UNSAFE_LEDS is not set
CONFIG_THINKPAD_ACPI_VIDEO=y
CONFIG_THINKPAD_ACPI_HOTKEY_POLL=y
CONFIG_SENSORS_HDAPS=m
# CONFIG_INTEL_MENLOW is not set
CONFIG_EEEPC_LAPTOP=m
CONFIG_ASUS_WMI=m
CONFIG_ASUS_NB_WMI=m
CONFIG_EEEPC_WMI=m
CONFIG_ACPI_WMI=m
CONFIG_MSI_WMI=m
CONFIG_TOPSTAR_LAPTOP=m
CONFIG_ACPI_TOSHIBA=m
CONFIG_TOSHIBA_BT_RFKILL=m
# CONFIG_TOSHIBA_HAPS is not set
# CONFIG_TOSHIBA_WMI is not set
CONFIG_ACPI_CMPC=m
CONFIG_INTEL_IPS=m
# CONFIG_IBM_RTL is not set
CONFIG_SAMSUNG_LAPTOP=m
CONFIG_MXM_WMI=m
CONFIG_INTEL_OAKTRAIL=m
CONFIG_SAMSUNG_Q10=m
CONFIG_APPLE_GMUX=m
# CONFIG_INTEL_RST is not set
# CONFIG_INTEL_SMARTCONNECT is not set
CONFIG_PVPANIC=y
# CONFIG_INTEL_PMC_IPC is not set
# CONFIG_SURFACE_PRO3_BUTTON is not set
# CONFIG_CHROME_PLATFORMS is not set
CONFIG_CLKDEV_LOOKUP=y
CONFIG_HAVE_CLK_PREPARE=y
CONFIG_COMMON_CLK=y
#
# Common Clock Framework
#
# CONFIG_COMMON_CLK_SI5351 is not set
# CONFIG_COMMON_CLK_PXA is not set
# CONFIG_COMMON_CLK_CDCE706 is not set
#
# Hardware Spinlock drivers
#
#
# Clock Source drivers
#
CONFIG_CLKEVT_I8253=y
CONFIG_I8253_LOCK=y
CONFIG_CLKBLD_I8253=y
# CONFIG_ATMEL_PIT is not set
# CONFIG_SH_TIMER_CMT is not set
# CONFIG_SH_TIMER_MTU2 is not set
# CONFIG_SH_TIMER_TMU is not set
# CONFIG_EM_TIMER_STI is not set
# CONFIG_MAILBOX is not set
CONFIG_IOMMU_API=y
CONFIG_IOMMU_SUPPORT=y
#
# Generic IOMMU Pagetable Support
#
CONFIG_IOMMU_IOVA=y
CONFIG_AMD_IOMMU=y
CONFIG_AMD_IOMMU_STATS=y
CONFIG_AMD_IOMMU_V2=m
CONFIG_DMAR_TABLE=y
CONFIG_INTEL_IOMMU=y
# CONFIG_INTEL_IOMMU_SVM is not set
# CONFIG_INTEL_IOMMU_DEFAULT_ON is not set
CONFIG_INTEL_IOMMU_FLOPPY_WA=y
CONFIG_IRQ_REMAP=y
#
# Remoteproc drivers
#
# CONFIG_STE_MODEM_RPROC is not set
#
# Rpmsg drivers
#
#
# SOC (System On Chip) specific Drivers
#
# CONFIG_SUNXI_SRAM is not set
# CONFIG_SOC_TI is not set
CONFIG_PM_DEVFREQ=y
#
# DEVFREQ Governors
#
CONFIG_DEVFREQ_GOV_SIMPLE_ONDEMAND=m
# CONFIG_DEVFREQ_GOV_PERFORMANCE is not set
# CONFIG_DEVFREQ_GOV_POWERSAVE is not set
# CONFIG_DEVFREQ_GOV_USERSPACE is not set
#
# DEVFREQ Drivers
#
# CONFIG_PM_DEVFREQ_EVENT is not set
# CONFIG_EXTCON is not set
# CONFIG_MEMORY is not set
# CONFIG_IIO is not set
CONFIG_NTB=m
# CONFIG_NTB_INTEL is not set
# CONFIG_NTB_PINGPONG is not set
# CONFIG_NTB_TOOL is not set
# CONFIG_NTB_TRANSPORT is not set
# CONFIG_VME_BUS is not set
# CONFIG_PWM is not set
# CONFIG_IPACK_BUS is not set
# CONFIG_RESET_CONTROLLER is not set
# CONFIG_FMC is not set
#
# PHY Subsystem
#
CONFIG_GENERIC_PHY=y
# CONFIG_PHY_PXA_28NM_HSIC is not set
# CONFIG_PHY_PXA_28NM_USB2 is not set
# CONFIG_BCM_KONA_USB2_PHY is not set
CONFIG_POWERCAP=y
# CONFIG_MCB is not set
#
# Performance monitor support
#
CONFIG_RAS=y
# CONFIG_AMD_MCE_INJ is not set
# CONFIG_THUNDERBOLT is not set
#
# Android
#
# CONFIG_ANDROID is not set
# CONFIG_LIBNVDIMM is not set
# CONFIG_NVMEM is not set
# CONFIG_STM is not set
# CONFIG_STM_DUMMY is not set
# CONFIG_STM_SOURCE_CONSOLE is not set
# CONFIG_INTEL_TH is not set
#
# FPGA Configuration Support
#
# CONFIG_FPGA is not set
#
# Firmware Drivers
#
CONFIG_EDD=m
# CONFIG_EDD_OFF is not set
CONFIG_FIRMWARE_MEMMAP=y
CONFIG_DELL_RBU=m
CONFIG_DCDBAS=m
CONFIG_DMIID=y
CONFIG_DMI_SYSFS=y
CONFIG_DMI_SCAN_MACHINE_NON_EFI_FALLBACK=y
CONFIG_ISCSI_IBFT_FIND=y
CONFIG_ISCSI_IBFT=m
# CONFIG_GOOGLE_FIRMWARE is not set
#
# EFI (Extensible Firmware Interface) Support
#
CONFIG_EFI_VARS=y
CONFIG_EFI_ESRT=y
CONFIG_EFI_VARS_PSTORE=y
CONFIG_EFI_VARS_PSTORE_DEFAULT_DISABLE=y
CONFIG_EFI_RUNTIME_MAP=y
# CONFIG_EFI_FAKE_MEMMAP is not set
CONFIG_EFI_RUNTIME_WRAPPERS=y
CONFIG_UEFI_CPER=y
#
# File systems
#
CONFIG_DCACHE_WORD_ACCESS=y
# CONFIG_EXT2_FS is not set
# CONFIG_EXT3_FS is not set
CONFIG_EXT4_FS=m
CONFIG_EXT4_USE_FOR_EXT2=y
CONFIG_EXT4_FS_POSIX_ACL=y
CONFIG_EXT4_FS_SECURITY=y
# CONFIG_EXT4_ENCRYPTION is not set
# CONFIG_EXT4_DEBUG is not set
CONFIG_JBD2=m
# CONFIG_JBD2_DEBUG is not set
CONFIG_FS_MBCACHE=m
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_XFS_FS=m
CONFIG_XFS_QUOTA=y
CONFIG_XFS_POSIX_ACL=y
# CONFIG_XFS_RT is not set
# CONFIG_XFS_WARN is not set
# CONFIG_XFS_DEBUG is not set
CONFIG_GFS2_FS=m
CONFIG_GFS2_FS_LOCKING_DLM=y
# CONFIG_OCFS2_FS is not set
CONFIG_BTRFS_FS=m
CONFIG_BTRFS_FS_POSIX_ACL=y
# CONFIG_BTRFS_FS_CHECK_INTEGRITY is not set
# CONFIG_BTRFS_FS_RUN_SANITY_TESTS is not set
# CONFIG_BTRFS_DEBUG is not set
# CONFIG_BTRFS_ASSERT is not set
# CONFIG_NILFS2_FS is not set
# CONFIG_F2FS_FS is not set
# CONFIG_FS_DAX is not set
CONFIG_FS_POSIX_ACL=y
CONFIG_EXPORTFS=y
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_FANOTIFY=y
CONFIG_FANOTIFY_ACCESS_PERMISSIONS=y
CONFIG_QUOTA=y
CONFIG_QUOTA_NETLINK_INTERFACE=y
CONFIG_PRINT_QUOTA_WARNING=y
# CONFIG_QUOTA_DEBUG is not set
CONFIG_QUOTA_TREE=y
# CONFIG_QFMT_V1 is not set
CONFIG_QFMT_V2=y
CONFIG_QUOTACTL=y
CONFIG_QUOTACTL_COMPAT=y
CONFIG_AUTOFS4_FS=y
CONFIG_FUSE_FS=m
CONFIG_CUSE=m
CONFIG_OVERLAY_FS=m
#
# Caches
#
CONFIG_FSCACHE=m
CONFIG_FSCACHE_STATS=y
# CONFIG_FSCACHE_HISTOGRAM is not set
# CONFIG_FSCACHE_DEBUG is not set
# CONFIG_FSCACHE_OBJECT_LIST is not set
CONFIG_CACHEFILES=m
# CONFIG_CACHEFILES_DEBUG is not set
# CONFIG_CACHEFILES_HISTOGRAM is not set
#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_UDF_FS=m
CONFIG_UDF_NLS=y
#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="ascii"
# CONFIG_NTFS_FS is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_VMCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
# CONFIG_PROC_CHILDREN is not set
CONFIG_KERNFS=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
CONFIG_TMPFS_XATTR=y
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
CONFIG_CONFIGFS_FS=y
CONFIG_EFIVAR_FS=y
CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_ECRYPT_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_JFFS2_FS is not set
# CONFIG_UBIFS_FS is not set
# CONFIG_LOGFS is not set
CONFIG_CRAMFS=m
CONFIG_SQUASHFS=m
CONFIG_SQUASHFS_FILE_CACHE=y
# CONFIG_SQUASHFS_FILE_DIRECT is not set
CONFIG_SQUASHFS_DECOMP_SINGLE=y
# CONFIG_SQUASHFS_DECOMP_MULTI is not set
# CONFIG_SQUASHFS_DECOMP_MULTI_PERCPU is not set
CONFIG_SQUASHFS_XATTR=y
CONFIG_SQUASHFS_ZLIB=y
# CONFIG_SQUASHFS_LZ4 is not set
CONFIG_SQUASHFS_LZO=y
CONFIG_SQUASHFS_XZ=y
# CONFIG_SQUASHFS_4K_DEVBLK_SIZE is not set
# CONFIG_SQUASHFS_EMBEDDED is not set
CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_QNX6FS_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_PSTORE=y
# CONFIG_PSTORE_CONSOLE is not set
# CONFIG_PSTORE_PMSG is not set
# CONFIG_PSTORE_FTRACE is not set
CONFIG_PSTORE_RAM=m
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
# CONFIG_EXOFS_FS is not set
CONFIG_ORE=m
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=m
# CONFIG_NFS_V2 is not set
CONFIG_NFS_V3=m
CONFIG_NFS_V3_ACL=y
CONFIG_NFS_V4=m
# CONFIG_NFS_SWAP is not set
CONFIG_NFS_V4_1=y
CONFIG_NFS_V4_2=y
CONFIG_PNFS_FILE_LAYOUT=m
CONFIG_PNFS_BLOCK=m
CONFIG_PNFS_OBJLAYOUT=m
CONFIG_PNFS_FLEXFILE_LAYOUT=m
CONFIG_NFS_V4_1_IMPLEMENTATION_ID_DOMAIN="kernel.org"
# CONFIG_NFS_V4_1_MIGRATION is not set
CONFIG_NFS_V4_SECURITY_LABEL=y
CONFIG_NFS_FSCACHE=y
# CONFIG_NFS_USE_LEGACY_DNS is not set
CONFIG_NFS_USE_KERNEL_DNS=y
CONFIG_NFS_DEBUG=y
CONFIG_NFSD=m
CONFIG_NFSD_V2_ACL=y
CONFIG_NFSD_V3=y
CONFIG_NFSD_V3_ACL=y
CONFIG_NFSD_V4=y
# CONFIG_NFSD_PNFS is not set
CONFIG_NFSD_V4_SECURITY_LABEL=y
# CONFIG_NFSD_FAULT_INJECTION is not set
CONFIG_GRACE_PERIOD=m
CONFIG_LOCKD=m
CONFIG_LOCKD_V4=y
CONFIG_NFS_ACL_SUPPORT=m
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=m
CONFIG_SUNRPC_GSS=m
CONFIG_SUNRPC_BACKCHANNEL=y
CONFIG_RPCSEC_GSS_KRB5=m
CONFIG_SUNRPC_DEBUG=y
CONFIG_SUNRPC_XPRT_RDMA=m
CONFIG_CEPH_FS=m
# CONFIG_CEPH_FSCACHE is not set
# CONFIG_CEPH_FS_POSIX_ACL is not set
CONFIG_CIFS=m
CONFIG_CIFS_STATS=y
# CONFIG_CIFS_STATS2 is not set
CONFIG_CIFS_WEAK_PW_HASH=y
CONFIG_CIFS_UPCALL=y
CONFIG_CIFS_XATTR=y
CONFIG_CIFS_POSIX=y
CONFIG_CIFS_ACL=y
CONFIG_CIFS_DEBUG=y
# CONFIG_CIFS_DEBUG2 is not set
CONFIG_CIFS_DFS_UPCALL=y
CONFIG_CIFS_SMB2=y
# CONFIG_CIFS_SMB311 is not set
# CONFIG_CIFS_FSCACHE is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="utf8"
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_CODEPAGE_737=m
CONFIG_NLS_CODEPAGE_775=m
CONFIG_NLS_CODEPAGE_850=m
CONFIG_NLS_CODEPAGE_852=m
CONFIG_NLS_CODEPAGE_855=m
CONFIG_NLS_CODEPAGE_857=m
CONFIG_NLS_CODEPAGE_860=m
CONFIG_NLS_CODEPAGE_861=m
CONFIG_NLS_CODEPAGE_862=m
CONFIG_NLS_CODEPAGE_863=m
CONFIG_NLS_CODEPAGE_864=m
CONFIG_NLS_CODEPAGE_865=m
CONFIG_NLS_CODEPAGE_866=m
CONFIG_NLS_CODEPAGE_869=m
CONFIG_NLS_CODEPAGE_936=m
CONFIG_NLS_CODEPAGE_950=m
CONFIG_NLS_CODEPAGE_932=m
CONFIG_NLS_CODEPAGE_949=m
CONFIG_NLS_CODEPAGE_874=m
CONFIG_NLS_ISO8859_8=m
CONFIG_NLS_CODEPAGE_1250=m
CONFIG_NLS_CODEPAGE_1251=m
CONFIG_NLS_ASCII=y
CONFIG_NLS_ISO8859_1=m
CONFIG_NLS_ISO8859_2=m
CONFIG_NLS_ISO8859_3=m
CONFIG_NLS_ISO8859_4=m
CONFIG_NLS_ISO8859_5=m
CONFIG_NLS_ISO8859_6=m
CONFIG_NLS_ISO8859_7=m
CONFIG_NLS_ISO8859_9=m
CONFIG_NLS_ISO8859_13=m
CONFIG_NLS_ISO8859_14=m
CONFIG_NLS_ISO8859_15=m
CONFIG_NLS_KOI8_R=m
CONFIG_NLS_KOI8_U=m
CONFIG_NLS_MAC_ROMAN=m
CONFIG_NLS_MAC_CELTIC=m
CONFIG_NLS_MAC_CENTEURO=m
CONFIG_NLS_MAC_CROATIAN=m
CONFIG_NLS_MAC_CYRILLIC=m
CONFIG_NLS_MAC_GAELIC=m
CONFIG_NLS_MAC_GREEK=m
CONFIG_NLS_MAC_ICELAND=m
CONFIG_NLS_MAC_INUIT=m
CONFIG_NLS_MAC_ROMANIAN=m
CONFIG_NLS_MAC_TURKISH=m
CONFIG_NLS_UTF8=m
CONFIG_DLM=m
CONFIG_DLM_DEBUG=y
#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
#
# printk and dmesg options
#
CONFIG_PRINTK_TIME=y
CONFIG_MESSAGE_LOGLEVEL_DEFAULT=4
CONFIG_BOOT_PRINTK_DELAY=y
CONFIG_DYNAMIC_DEBUG=y
#
# Compile-time checks and compiler options
#
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_INFO_REDUCED is not set
# CONFIG_DEBUG_INFO_SPLIT is not set
# CONFIG_DEBUG_INFO_DWARF4 is not set
# CONFIG_GDB_SCRIPTS is not set
# CONFIG_ENABLE_WARN_DEPRECATED is not set
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=2048
CONFIG_STRIP_ASM_SYMS=y
# CONFIG_READABLE_ASM is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_PAGE_OWNER is not set
CONFIG_DEBUG_FS=y
CONFIG_HEADERS_CHECK=y
CONFIG_DEBUG_SECTION_MISMATCH=y
CONFIG_SECTION_MISMATCH_WARN_ONLY=y
CONFIG_ARCH_WANT_FRAME_POINTERS=y
CONFIG_FRAME_POINTER=y
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
CONFIG_MAGIC_SYSRQ=y
CONFIG_MAGIC_SYSRQ_DEFAULT_ENABLE=0x1
CONFIG_DEBUG_KERNEL=y
#
# Memory Debugging
#
# CONFIG_PAGE_EXTENSION is not set
# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
CONFIG_HAVE_DEBUG_KMEMLEAK=y
# CONFIG_DEBUG_KMEMLEAK is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_VIRTUAL is not set
CONFIG_DEBUG_MEMORY_INIT=y
# CONFIG_DEBUG_PER_CPU_MAPS is not set
CONFIG_HAVE_DEBUG_STACKOVERFLOW=y
CONFIG_DEBUG_STACKOVERFLOW=y
CONFIG_HAVE_ARCH_KMEMCHECK=y
CONFIG_HAVE_ARCH_KASAN=y
# CONFIG_KASAN is not set
CONFIG_DEBUG_SHIRQ=y
#
# Debug Lockups and Hangs
#
CONFIG_LOCKUP_DETECTOR=y
CONFIG_HARDLOCKUP_DETECTOR=y
CONFIG_BOOTPARAM_HARDLOCKUP_PANIC=y
CONFIG_BOOTPARAM_HARDLOCKUP_PANIC_VALUE=1
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
CONFIG_DETECT_HUNG_TASK=y
CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=120
# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
CONFIG_PANIC_ON_OOPS=y
CONFIG_PANIC_ON_OOPS_VALUE=1
CONFIG_PANIC_TIMEOUT=0
CONFIG_SCHED_DEBUG=y
CONFIG_SCHED_INFO=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_SCHED_STACK_END_CHECK is not set
# CONFIG_DEBUG_TIMEKEEPING is not set
CONFIG_TIMER_STATS=y
#
# Lock Debugging (spinlocks, mutexes, etc...)
#
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
# CONFIG_DEBUG_WW_MUTEX_SLOWPATH is not set
# CONFIG_DEBUG_LOCK_ALLOC is not set
# CONFIG_PROVE_LOCKING is not set
# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_ATOMIC_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_LOCK_TORTURE_TEST is not set
CONFIG_STACKTRACE=y
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_LIST=y
# CONFIG_DEBUG_PI_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
# CONFIG_DEBUG_CREDENTIALS is not set
#
# RCU Debugging
#
# CONFIG_PROVE_RCU is not set
CONFIG_SPARSE_RCU_POINTER=y
# CONFIG_TORTURE_TEST is not set
# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_RCU_CPU_STALL_TIMEOUT=60
# CONFIG_RCU_TRACE is not set
# CONFIG_RCU_EQS_DEBUG is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_NOTIFIER_ERROR_INJECTION is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_ARCH_HAS_DEBUG_STRICT_USER_COPY_CHECKS=y
# CONFIG_DEBUG_STRICT_USER_COPY_CHECKS is not set
CONFIG_USER_STACKTRACE_SUPPORT=y
CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_FP_TEST=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_DYNAMIC_FTRACE_WITH_REGS=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_HAVE_FENTRY=y
CONFIG_HAVE_C_RECORDMCOUNT=y
CONFIG_TRACER_MAX_TRACE=y
CONFIG_TRACE_CLOCK=y
CONFIG_RING_BUFFER=y
CONFIG_EVENT_TRACING=y
CONFIG_CONTEXT_SWITCH_TRACER=y
CONFIG_RING_BUFFER_ALLOW_SWAP=y
CONFIG_TRACING=y
CONFIG_GENERIC_TRACER=y
CONFIG_TRACING_SUPPORT=y
CONFIG_FTRACE=y
CONFIG_FUNCTION_TRACER=y
CONFIG_FUNCTION_GRAPH_TRACER=y
# CONFIG_IRQSOFF_TRACER is not set
CONFIG_SCHED_TRACER=y
CONFIG_FTRACE_SYSCALLS=y
CONFIG_TRACER_SNAPSHOT=y
# CONFIG_TRACER_SNAPSHOT_PER_CPU_SWAP is not set
CONFIG_BRANCH_PROFILE_NONE=y
# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
# CONFIG_PROFILE_ALL_BRANCHES is not set
CONFIG_STACK_TRACER=y
CONFIG_BLK_DEV_IO_TRACE=y
CONFIG_KPROBE_EVENT=y
CONFIG_UPROBE_EVENT=y
CONFIG_PROBE_EVENTS=y
CONFIG_DYNAMIC_FTRACE=y
CONFIG_DYNAMIC_FTRACE_WITH_REGS=y
CONFIG_FUNCTION_PROFILER=y
CONFIG_FTRACE_MCOUNT_RECORD=y
# CONFIG_FTRACE_STARTUP_TEST is not set
# CONFIG_MMIOTRACE is not set
# CONFIG_TRACEPOINT_BENCHMARK is not set
CONFIG_RING_BUFFER_BENCHMARK=m
# CONFIG_RING_BUFFER_STARTUP_TEST is not set
# CONFIG_TRACE_ENUM_MAP_FILE is not set
#
# Runtime Testing
#
# CONFIG_LKDTM is not set
# CONFIG_TEST_LIST_SORT is not set
# CONFIG_KPROBES_SANITY_TEST is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_RBTREE_TEST is not set
# CONFIG_INTERVAL_TREE_TEST is not set
# CONFIG_PERCPU_TEST is not set
CONFIG_ATOMIC64_SELFTEST=y
CONFIG_ASYNC_RAID6_TEST=m
# CONFIG_TEST_HEXDUMP is not set
# CONFIG_TEST_STRING_HELPERS is not set
CONFIG_TEST_KSTRTOX=y
# CONFIG_TEST_PRINTF is not set
# CONFIG_TEST_RHASHTABLE is not set
CONFIG_PROVIDE_OHCI1394_DMA_INIT=y
CONFIG_BUILD_DOCSRC=y
# CONFIG_DMA_API_DEBUG is not set
# CONFIG_TEST_LKM is not set
# CONFIG_TEST_USER_COPY is not set
# CONFIG_TEST_BPF is not set
# CONFIG_TEST_FIRMWARE is not set
# CONFIG_TEST_UDELAY is not set
# CONFIG_MEMTEST is not set
# CONFIG_TEST_STATIC_KEYS is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_KGDB=y
CONFIG_KGDB_SERIAL_CONSOLE=y
CONFIG_KGDB_TESTS=y
# CONFIG_KGDB_TESTS_ON_BOOT is not set
CONFIG_KGDB_LOW_LEVEL_TRAP=y
CONFIG_KGDB_KDB=y
CONFIG_KDB_DEFAULT_ENABLE=0x1
CONFIG_KDB_KEYBOARD=y
CONFIG_KDB_CONTINUE_CATASTROPHIC=0
CONFIG_STRICT_DEVMEM=y
# CONFIG_X86_VERBOSE_BOOTUP is not set
CONFIG_EARLY_PRINTK=y
CONFIG_EARLY_PRINTK_DBGP=y
CONFIG_EARLY_PRINTK_EFI=y
# CONFIG_X86_PTDUMP_CORE is not set
# CONFIG_X86_PTDUMP is not set
# CONFIG_EFI_PGT_DUMP is not set
# CONFIG_DEBUG_RODATA is not set
CONFIG_DEBUG_SET_MODULE_RONX=y
CONFIG_DEBUG_NX_TEST=m
CONFIG_DOUBLEFAULT=y
# CONFIG_DEBUG_TLBFLUSH is not set
# CONFIG_IOMMU_DEBUG is not set
# CONFIG_IOMMU_STRESS is not set
CONFIG_HAVE_MMIOTRACE_SUPPORT=y
CONFIG_X86_DECODER_SELFTEST=y
CONFIG_IO_DELAY_TYPE_0X80=0
CONFIG_IO_DELAY_TYPE_0XED=1
CONFIG_IO_DELAY_TYPE_UDELAY=2
CONFIG_IO_DELAY_TYPE_NONE=3
CONFIG_IO_DELAY_0X80=y
# CONFIG_IO_DELAY_0XED is not set
# CONFIG_IO_DELAY_UDELAY is not set
# CONFIG_IO_DELAY_NONE is not set
CONFIG_DEFAULT_IO_DELAY_TYPE=0
CONFIG_DEBUG_BOOT_PARAMS=y
# CONFIG_CPA_DEBUG is not set
CONFIG_OPTIMIZE_INLINING=y
# CONFIG_DEBUG_ENTRY is not set
# CONFIG_DEBUG_NMI_SELFTEST is not set
# CONFIG_X86_DEBUG_STATIC_CPU_HAS is not set
CONFIG_X86_DEBUG_FPU=y
# CONFIG_PUNIT_ATOM_DEBUG is not set
#
# Security options
#
CONFIG_KEYS=y
CONFIG_PERSISTENT_KEYRINGS=y
CONFIG_BIG_KEYS=y
CONFIG_TRUSTED_KEYS=y
CONFIG_ENCRYPTED_KEYS=y
# CONFIG_SECURITY_DMESG_RESTRICT is not set
CONFIG_SECURITY=y
CONFIG_SECURITYFS=y
CONFIG_SECURITY_NETWORK=y
CONFIG_SECURITY_NETWORK_XFRM=y
# CONFIG_SECURITY_PATH is not set
CONFIG_INTEL_TXT=y
CONFIG_LSM_MMAP_MIN_ADDR=65535
CONFIG_SECURITY_SELINUX=y
CONFIG_SECURITY_SELINUX_BOOTPARAM=y
CONFIG_SECURITY_SELINUX_BOOTPARAM_VALUE=1
CONFIG_SECURITY_SELINUX_DISABLE=y
CONFIG_SECURITY_SELINUX_DEVELOP=y
CONFIG_SECURITY_SELINUX_AVC_STATS=y
CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=1
# CONFIG_SECURITY_SELINUX_POLICYDB_VERSION_MAX is not set
# CONFIG_SECURITY_SMACK is not set
# CONFIG_SECURITY_TOMOYO is not set
# CONFIG_SECURITY_APPARMOR is not set
# CONFIG_SECURITY_YAMA is not set
CONFIG_INTEGRITY=y
CONFIG_INTEGRITY_SIGNATURE=y
CONFIG_INTEGRITY_ASYMMETRIC_KEYS=y
CONFIG_INTEGRITY_AUDIT=y
CONFIG_IMA=y
CONFIG_IMA_MEASURE_PCR_IDX=10
CONFIG_IMA_LSM_RULES=y
# CONFIG_IMA_TEMPLATE is not set
CONFIG_IMA_NG_TEMPLATE=y
# CONFIG_IMA_SIG_TEMPLATE is not set
CONFIG_IMA_DEFAULT_TEMPLATE="ima-ng"
CONFIG_IMA_DEFAULT_HASH_SHA1=y
# CONFIG_IMA_DEFAULT_HASH_SHA256 is not set
# CONFIG_IMA_DEFAULT_HASH_SHA512 is not set
# CONFIG_IMA_DEFAULT_HASH_WP512 is not set
CONFIG_IMA_DEFAULT_HASH="sha1"
CONFIG_IMA_APPRAISE=y
CONFIG_IMA_TRUSTED_KEYRING=y
# CONFIG_IMA_LOAD_X509 is not set
CONFIG_EVM=y
CONFIG_EVM_ATTR_FSUUID=y
CONFIG_DEFAULT_SECURITY_SELINUX=y
# CONFIG_DEFAULT_SECURITY_DAC is not set
CONFIG_DEFAULT_SECURITY="selinux"
CONFIG_XOR_BLOCKS=m
CONFIG_ASYNC_CORE=m
CONFIG_ASYNC_MEMCPY=m
CONFIG_ASYNC_XOR=m
CONFIG_ASYNC_PQ=m
CONFIG_ASYNC_RAID6_RECOV=m
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
CONFIG_CRYPTO_FIPS=y
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_RNG_DEFAULT=y
CONFIG_CRYPTO_PCOMP=m
CONFIG_CRYPTO_PCOMP2=y
CONFIG_CRYPTO_AKCIPHER2=y
CONFIG_CRYPTO_AKCIPHER=m
# CONFIG_CRYPTO_RSA is not set
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
CONFIG_CRYPTO_USER=m
# CONFIG_CRYPTO_MANAGER_DISABLE_TESTS is not set
CONFIG_CRYPTO_GF128MUL=m
CONFIG_CRYPTO_NULL=y
CONFIG_CRYPTO_NULL2=y
CONFIG_CRYPTO_PCRYPT=m
CONFIG_CRYPTO_WORKQUEUE=y
CONFIG_CRYPTO_CRYPTD=m
CONFIG_CRYPTO_MCRYPTD=m
CONFIG_CRYPTO_AUTHENC=m
CONFIG_CRYPTO_TEST=m
CONFIG_CRYPTO_ABLK_HELPER=m
CONFIG_CRYPTO_GLUE_HELPER_X86=m
#
# Authenticated Encryption with Associated Data
#
CONFIG_CRYPTO_CCM=m
CONFIG_CRYPTO_GCM=m
# CONFIG_CRYPTO_CHACHA20POLY1305 is not set
CONFIG_CRYPTO_SEQIV=y
CONFIG_CRYPTO_ECHAINIV=m
#
# Block modes
#
CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_CTR=y
CONFIG_CRYPTO_CTS=m
CONFIG_CRYPTO_ECB=y
CONFIG_CRYPTO_LRW=m
CONFIG_CRYPTO_PCBC=m
CONFIG_CRYPTO_XTS=m
# CONFIG_CRYPTO_KEYWRAP is not set
#
# Hash modes
#
CONFIG_CRYPTO_CMAC=m
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_XCBC=m
CONFIG_CRYPTO_VMAC=m
#
# Digest
#
CONFIG_CRYPTO_CRC32C=y
CONFIG_CRYPTO_CRC32C_INTEL=m
CONFIG_CRYPTO_CRC32=m
CONFIG_CRYPTO_CRC32_PCLMUL=m
CONFIG_CRYPTO_CRCT10DIF=y
CONFIG_CRYPTO_CRCT10DIF_PCLMUL=m
CONFIG_CRYPTO_GHASH=m
# CONFIG_CRYPTO_POLY1305 is not set
# CONFIG_CRYPTO_POLY1305_X86_64 is not set
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_RMD128=m
CONFIG_CRYPTO_RMD160=m
CONFIG_CRYPTO_RMD256=m
CONFIG_CRYPTO_RMD320=m
CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_SHA1_SSSE3=y
CONFIG_CRYPTO_SHA256_SSSE3=y
CONFIG_CRYPTO_SHA512_SSSE3=m
CONFIG_CRYPTO_SHA1_MB=m
CONFIG_CRYPTO_SHA256=y
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_TGR192=m
CONFIG_CRYPTO_WP512=m
CONFIG_CRYPTO_GHASH_CLMUL_NI_INTEL=m
#
# Ciphers
#
CONFIG_CRYPTO_AES=y
CONFIG_CRYPTO_AES_X86_64=y
CONFIG_CRYPTO_AES_NI_INTEL=m
CONFIG_CRYPTO_ANUBIS=m
CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_BLOWFISH_COMMON=m
CONFIG_CRYPTO_BLOWFISH_X86_64=m
CONFIG_CRYPTO_CAMELLIA=m
CONFIG_CRYPTO_CAMELLIA_X86_64=m
CONFIG_CRYPTO_CAMELLIA_AESNI_AVX_X86_64=m
CONFIG_CRYPTO_CAMELLIA_AESNI_AVX2_X86_64=m
CONFIG_CRYPTO_CAST_COMMON=m
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST5_AVX_X86_64=m
CONFIG_CRYPTO_CAST6=m
CONFIG_CRYPTO_CAST6_AVX_X86_64=m
CONFIG_CRYPTO_DES=m
# CONFIG_CRYPTO_DES3_EDE_X86_64 is not set
CONFIG_CRYPTO_FCRYPT=m
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_SALSA20=m
CONFIG_CRYPTO_SALSA20_X86_64=m
# CONFIG_CRYPTO_CHACHA20 is not set
# CONFIG_CRYPTO_CHACHA20_X86_64 is not set
CONFIG_CRYPTO_SEED=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_SERPENT_SSE2_X86_64=m
CONFIG_CRYPTO_SERPENT_AVX_X86_64=m
CONFIG_CRYPTO_SERPENT_AVX2_X86_64=m
CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_TWOFISH_COMMON=m
CONFIG_CRYPTO_TWOFISH_X86_64=m
CONFIG_CRYPTO_TWOFISH_X86_64_3WAY=m
CONFIG_CRYPTO_TWOFISH_AVX_X86_64=m
#
# Compression
#
CONFIG_CRYPTO_DEFLATE=m
CONFIG_CRYPTO_ZLIB=m
CONFIG_CRYPTO_LZO=y
# CONFIG_CRYPTO_842 is not set
# CONFIG_CRYPTO_LZ4 is not set
# CONFIG_CRYPTO_LZ4HC is not set
#
# Random Number Generation
#
CONFIG_CRYPTO_ANSI_CPRNG=m
CONFIG_CRYPTO_DRBG_MENU=y
CONFIG_CRYPTO_DRBG_HMAC=y
CONFIG_CRYPTO_DRBG_HASH=y
CONFIG_CRYPTO_DRBG_CTR=y
CONFIG_CRYPTO_DRBG=y
CONFIG_CRYPTO_JITTERENTROPY=y
CONFIG_CRYPTO_USER_API=y
CONFIG_CRYPTO_USER_API_HASH=y
CONFIG_CRYPTO_USER_API_SKCIPHER=y
# CONFIG_CRYPTO_USER_API_RNG is not set
# CONFIG_CRYPTO_USER_API_AEAD is not set
CONFIG_CRYPTO_HASH_INFO=y
CONFIG_CRYPTO_HW=y
CONFIG_CRYPTO_DEV_PADLOCK=m
CONFIG_CRYPTO_DEV_PADLOCK_AES=m
CONFIG_CRYPTO_DEV_PADLOCK_SHA=m
# CONFIG_CRYPTO_DEV_CCP is not set
CONFIG_CRYPTO_DEV_QAT=m
CONFIG_CRYPTO_DEV_QAT_DH895xCC=m
# CONFIG_CRYPTO_DEV_QAT_DH895xCCVF is not set
CONFIG_ASYMMETRIC_KEY_TYPE=y
CONFIG_ASYMMETRIC_PUBLIC_KEY_SUBTYPE=y
CONFIG_PUBLIC_KEY_ALGO_RSA=y
CONFIG_X509_CERTIFICATE_PARSER=y
CONFIG_PKCS7_MESSAGE_PARSER=y
# CONFIG_PKCS7_TEST_KEY is not set
CONFIG_SIGNED_PE_FILE_VERIFICATION=y
#
# Certificates for signature checking
#
CONFIG_MODULE_SIG_KEY="certs/signing_key.pem"
CONFIG_SYSTEM_TRUSTED_KEYRING=y
CONFIG_SYSTEM_TRUSTED_KEYS=""
CONFIG_HAVE_KVM=y
CONFIG_HAVE_KVM_IRQCHIP=y
CONFIG_HAVE_KVM_IRQFD=y
CONFIG_HAVE_KVM_IRQ_ROUTING=y
CONFIG_HAVE_KVM_EVENTFD=y
CONFIG_KVM_APIC_ARCHITECTURE=y
CONFIG_KVM_MMIO=y
CONFIG_KVM_ASYNC_PF=y
CONFIG_HAVE_KVM_MSI=y
CONFIG_HAVE_KVM_CPU_RELAX_INTERCEPT=y
CONFIG_KVM_VFIO=y
CONFIG_KVM_GENERIC_DIRTYLOG_READ_PROTECT=y
CONFIG_KVM_COMPAT=y
CONFIG_HAVE_KVM_IRQ_BYPASS=y
CONFIG_VIRTUALIZATION=y
CONFIG_KVM=m
CONFIG_KVM_INTEL=m
CONFIG_KVM_AMD=m
CONFIG_KVM_MMU_AUDIT=y
# CONFIG_KVM_DEVICE_ASSIGNMENT is not set
CONFIG_BINARY_PRINTF=y
#
# Library routines
#
CONFIG_RAID6_PQ=m
CONFIG_BITREVERSE=y
# CONFIG_HAVE_ARCH_BITREVERSE is not set
CONFIG_RATIONAL=y
CONFIG_GENERIC_STRNCPY_FROM_USER=y
CONFIG_GENERIC_STRNLEN_USER=y
CONFIG_GENERIC_NET_UTILS=y
CONFIG_GENERIC_FIND_FIRST_BIT=y
CONFIG_GENERIC_PCI_IOMAP=y
CONFIG_GENERIC_IOMAP=y
CONFIG_GENERIC_IO=y
CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y
CONFIG_ARCH_HAS_FAST_MULTIPLIER=y
CONFIG_CRC_CCITT=m
CONFIG_CRC16=y
CONFIG_CRC_T10DIF=y
CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
# CONFIG_CRC32_SELFTEST is not set
CONFIG_CRC32_SLICEBY8=y
# CONFIG_CRC32_SLICEBY4 is not set
# CONFIG_CRC32_SARWATE is not set
# CONFIG_CRC32_BIT is not set
# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=m
CONFIG_CRC8=m
# CONFIG_AUDIT_ARCH_COMPAT_GENERIC is not set
# CONFIG_RANDOM32_SELFTEST is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_LZO_COMPRESS=y
CONFIG_LZO_DECOMPRESS=y
CONFIG_LZ4_DECOMPRESS=y
CONFIG_XZ_DEC=y
CONFIG_XZ_DEC_X86=y
CONFIG_XZ_DEC_POWERPC=y
CONFIG_XZ_DEC_IA64=y
CONFIG_XZ_DEC_ARM=y
CONFIG_XZ_DEC_ARMTHUMB=y
CONFIG_XZ_DEC_SPARC=y
CONFIG_XZ_DEC_BCJ=y
# CONFIG_XZ_DEC_TEST is not set
CONFIG_DECOMPRESS_GZIP=y
CONFIG_DECOMPRESS_BZIP2=y
CONFIG_DECOMPRESS_LZMA=y
CONFIG_DECOMPRESS_XZ=y
CONFIG_DECOMPRESS_LZO=y
CONFIG_DECOMPRESS_LZ4=y
CONFIG_GENERIC_ALLOCATOR=y
CONFIG_REED_SOLOMON=m
CONFIG_REED_SOLOMON_ENC8=y
CONFIG_REED_SOLOMON_DEC8=y
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=m
CONFIG_TEXTSEARCH_BM=m
CONFIG_TEXTSEARCH_FSM=m
CONFIG_INTERVAL_TREE=y
CONFIG_ASSOCIATIVE_ARRAY=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT_MAP=y
CONFIG_HAS_DMA=y
CONFIG_CHECK_SIGNATURE=y
CONFIG_CPUMASK_OFFSTACK=y
CONFIG_CPU_RMAP=y
CONFIG_DQL=y
CONFIG_GLOB=y
# CONFIG_GLOB_SELFTEST is not set
CONFIG_NLATTR=y
CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y
CONFIG_CLZ_TAB=y
CONFIG_CORDIC=m
# CONFIG_DDR is not set
CONFIG_MPILIB=y
CONFIG_SIGNATURE=y
CONFIG_OID_REGISTRY=y
CONFIG_UCS2_STRING=y
CONFIG_FONT_SUPPORT=y
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
# CONFIG_SG_SPLIT is not set
CONFIG_ARCH_HAS_SG_CHAIN=y
CONFIG_ARCH_HAS_PMEM_API=y
CONFIG_ARCH_HAS_MMIO_FLUSH=y
^ permalink raw reply [flat|nested] 46+ messages in thread
* Re: [Bug 111441] New: iscsi fails to attach to targets
2016-01-29 2:55 ` Serguei Bezverkhi (sbezverk)
@ 2016-01-29 8:01 ` Michael Christie
2016-01-29 8:25 ` Mike Christie
2016-01-29 12:04 ` Serguei Bezverkhi (sbezverk)
0 siblings, 2 replies; 46+ messages in thread
From: Michael Christie @ 2016-01-29 8:01 UTC (permalink / raw)
To: Serguei Bezverkhi (sbezverk)
Cc: bugzilla-daemon@bugzilla.kernel.org, linux-scsi@vger.kernel.org
[-- Attachment #1: Type: text/plain, Size: 3189 bytes --]
Can you send me your lio config?
Are you running lio on the same box as the initiator so it is also changing kernel version with each test?
It looks like the scsi scan code is not handling the lack of LUN 0 correctly. I think I know what patch is causing it, but cannot get my lio config to return the same info as you for the non existent LUNs, so I think I am hitting slightly different error paths.
> On Jan 28, 2016, at 8:55 PM, Serguei Bezverkhi (sbezverk) <sbezverk@cisco.com> wrote:
>
> HI Mike,
>
> Thank you for looking into this issue.
> I reproduced this issue this using both mainline compiled kernel and the one posted by El Repo. I used both of these kernels with RHEL 7.2, both kernels showed exactly the same issue. When I rollback to the original kernel 3.10.0-327.4.4, I do not see the issue.
>
> As per your request attaching kernel config file. Please let me know if you need any additional info or if you want to take a look at the router, I can setup a webex meeting to show you the issue.
>
> Thank you
>
> Serguei
>
>
>
>
> Serguei Bezverkhi,
> TECHNICAL LEADER.SERVICES
> Global SP Services
> sbezverk@cisco.com
> Phone: +1 416 306 7312
> Mobile: +1 514 234 7374
>
> CCIE (R&S,SP,Sec) - #9527
>
> Cisco.com
>
>
>
> Think before you print.
> This email may contain confidential and privileged material for the sole use of the intended recipient. Any review, use, distribution or disclosure by others is strictly prohibited. If you are not the intended recipient (or authorized to receive for the recipient), please contact the sender by reply email and delete all copies of this message.
> Please click here for Company Registration Information.
>
>
>
>
> -----Original Message-----
> From: linux-scsi-owner@vger.kernel.org [mailto:linux-scsi-owner@vger.kernel.org] On Behalf Of Mike Christie
> Sent: Thursday, January 28, 2016 8:53 PM
> To: bugzilla-daemon@bugzilla.kernel.org; linux-scsi@vger.kernel.org
> Subject: Re: [Bug 111441] New: iscsi fails to attach to targets
>
> On 01/28/2016 04:51 PM, bugzilla-daemon@bugzilla.kernel.org wrote:
>> https://bugzilla.kernel.org/show_bug.cgi?id=111441
>>
>> Bug ID: 111441
>> Summary: iscsi fails to attach to targets
>> Product: IO/Storage
>> Version: 2.5
>> Kernel Version: 4.4.0-1
>> Hardware: x86-64
>> OS: Linux
>> Tree: Mainline
>> Status: NEW
>
>
>> 4.4.0-1.el7.elrepo.x86_64 #1
>
> I have not seen this oops before. We saw similar ones around 5 or 6 years ago, but they were due to some sysfs or block or scsi issue (I cannot remember exacty) and fixed there.
>
> Is this a distro kernel or mainline. BZ says mainline, but the kernel name in bug looks like a red hat related one. Where did you get it?
>
> I do not hit this in 4.4 mainline. Send me your kernel .config, so I can make sure I have the same options.
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-scsi" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
[-- Attachment #2: config-4.4.0 --]
[-- Type: application/octet-stream, Size: 141993 bytes --]
#
# Automatically generated file; DO NOT EDIT.
# Linux/x86 4.4.0 Kernel Configuration
#
CONFIG_64BIT=y
CONFIG_X86_64=y
CONFIG_X86=y
CONFIG_INSTRUCTION_DECODER=y
CONFIG_PERF_EVENTS_INTEL_UNCORE=y
CONFIG_OUTPUT_FORMAT="elf64-x86-64"
CONFIG_ARCH_DEFCONFIG="arch/x86/configs/x86_64_defconfig"
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_MMU=y
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_NEED_SG_DMA_LENGTH=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_ARCH_HAS_CPU_RELAX=y
CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ARCH_WANT_HUGE_PMD_SHARE=y
CONFIG_ARCH_WANT_GENERAL_HUGETLB=y
CONFIG_ZONE_DMA32=y
CONFIG_AUDIT_ARCH=y
CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_HAVE_INTEL_TXT=y
CONFIG_X86_64_SMP=y
CONFIG_ARCH_HWEIGHT_CFLAGS="-fcall-saved-rdi -fcall-saved-rsi -fcall-saved-rdx -fcall-saved-rcx -fcall-saved-r8 -fcall-saved-r9 -fcall-saved-r10 -fcall-saved-r11"
CONFIG_ARCH_SUPPORTS_UPROBES=y
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_PGTABLE_LEVELS=4
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_IRQ_WORK=y
CONFIG_BUILDTIME_EXTABLE_SORT=y
#
# General setup
#
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_CROSS_COMPILE=""
# CONFIG_COMPILE_TEST is not set
CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_BZIP2=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_HAVE_KERNEL_XZ=y
CONFIG_HAVE_KERNEL_LZO=y
CONFIG_HAVE_KERNEL_LZ4=y
CONFIG_KERNEL_GZIP=y
# CONFIG_KERNEL_BZIP2 is not set
# CONFIG_KERNEL_LZMA is not set
# CONFIG_KERNEL_XZ is not set
# CONFIG_KERNEL_LZO is not set
# CONFIG_KERNEL_LZ4 is not set
CONFIG_DEFAULT_HOSTNAME="(none)"
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_CROSS_MEMORY_ATTACH=y
CONFIG_FHANDLE=y
CONFIG_USELIB=y
CONFIG_AUDIT=y
CONFIG_HAVE_ARCH_AUDITSYSCALL=y
CONFIG_AUDITSYSCALL=y
CONFIG_AUDIT_WATCH=y
CONFIG_AUDIT_TREE=y
#
# IRQ subsystem
#
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_PENDING_IRQ=y
CONFIG_IRQ_DOMAIN=y
CONFIG_IRQ_DOMAIN_HIERARCHY=y
CONFIG_GENERIC_MSI_IRQ=y
CONFIG_GENERIC_MSI_IRQ_DOMAIN=y
# CONFIG_IRQ_DOMAIN_DEBUG is not set
CONFIG_IRQ_FORCED_THREADING=y
CONFIG_SPARSE_IRQ=y
CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_ARCH_CLOCKSOURCE_DATA=y
CONFIG_CLOCKSOURCE_VALIDATE_LAST_CYCLE=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_GENERIC_CLOCKEVENTS_MIN_ADJUST=y
CONFIG_GENERIC_CMOS_UPDATE=y
#
# Timers subsystem
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ_COMMON=y
# CONFIG_HZ_PERIODIC is not set
# CONFIG_NO_HZ_IDLE is not set
CONFIG_NO_HZ_FULL=y
# CONFIG_NO_HZ_FULL_ALL is not set
# CONFIG_NO_HZ_FULL_SYSIDLE is not set
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
#
# CPU/Task time and stats accounting
#
CONFIG_VIRT_CPU_ACCOUNTING=y
CONFIG_VIRT_CPU_ACCOUNTING_GEN=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
CONFIG_TASKSTATS=y
CONFIG_TASK_DELAY_ACCT=y
CONFIG_TASK_XACCT=y
CONFIG_TASK_IO_ACCOUNTING=y
#
# RCU Subsystem
#
CONFIG_TREE_RCU=y
# CONFIG_RCU_EXPERT is not set
CONFIG_SRCU=y
# CONFIG_TASKS_RCU is not set
CONFIG_RCU_STALL_COMMON=y
CONFIG_CONTEXT_TRACKING=y
# CONFIG_CONTEXT_TRACKING_FORCE is not set
# CONFIG_TREE_RCU_TRACE is not set
CONFIG_RCU_NOCB_CPU=y
# CONFIG_RCU_NOCB_CPU_NONE is not set
# CONFIG_RCU_NOCB_CPU_ZERO is not set
CONFIG_RCU_NOCB_CPU_ALL=y
# CONFIG_RCU_EXPEDITE_BOOT is not set
CONFIG_BUILD_BIN2C=y
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=20
CONFIG_LOG_CPU_MAX_BUF_SHIFT=12
CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
CONFIG_ARCH_SUPPORTS_NUMA_BALANCING=y
CONFIG_ARCH_WANT_BATCHED_UNMAP_TLB_FLUSH=y
CONFIG_ARCH_SUPPORTS_INT128=y
CONFIG_NUMA_BALANCING=y
CONFIG_NUMA_BALANCING_DEFAULT_ENABLED=y
CONFIG_CGROUPS=y
# CONFIG_CGROUP_DEBUG is not set
CONFIG_CGROUP_FREEZER=y
# CONFIG_CGROUP_PIDS is not set
CONFIG_CGROUP_DEVICE=y
CONFIG_CPUSETS=y
CONFIG_PROC_PID_CPUSET=y
CONFIG_CGROUP_CPUACCT=y
CONFIG_PAGE_COUNTER=y
CONFIG_MEMCG=y
CONFIG_MEMCG_SWAP=y
CONFIG_MEMCG_SWAP_ENABLED=y
CONFIG_MEMCG_KMEM=y
CONFIG_CGROUP_HUGETLB=y
CONFIG_CGROUP_PERF=y
CONFIG_CGROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
CONFIG_CFS_BANDWIDTH=y
CONFIG_RT_GROUP_SCHED=y
CONFIG_BLK_CGROUP=y
# CONFIG_DEBUG_BLK_CGROUP is not set
CONFIG_CGROUP_WRITEBACK=y
# CONFIG_CHECKPOINT_RESTORE is not set
CONFIG_NAMESPACES=y
CONFIG_UTS_NS=y
CONFIG_IPC_NS=y
CONFIG_USER_NS=y
CONFIG_PID_NS=y
CONFIG_NET_NS=y
CONFIG_SCHED_AUTOGROUP=y
# CONFIG_SYSFS_DEPRECATED is not set
CONFIG_RELAY=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_RD_GZIP=y
CONFIG_RD_BZIP2=y
CONFIG_RD_LZMA=y
CONFIG_RD_XZ=y
CONFIG_RD_LZO=y
CONFIG_RD_LZ4=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
CONFIG_HAVE_UID16=y
CONFIG_SYSCTL_EXCEPTION_TRACE=y
CONFIG_HAVE_PCSPKR_PLATFORM=y
CONFIG_BPF=y
# CONFIG_EXPERT is not set
CONFIG_UID16=y
CONFIG_MULTIUSER=y
CONFIG_SGETMASK_SYSCALL=y
CONFIG_SYSFS_SYSCALL=y
# CONFIG_SYSCTL_SYSCALL is not set
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_PCSPKR_PLATFORM=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
# CONFIG_BPF_SYSCALL is not set
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_ADVISE_SYSCALLS=y
CONFIG_USERFAULTFD=y
CONFIG_PCI_QUIRKS=y
CONFIG_MEMBARRIER=y
# CONFIG_EMBEDDED is not set
CONFIG_HAVE_PERF_EVENTS=y
#
# Kernel Performance Events And Counters
#
CONFIG_PERF_EVENTS=y
# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLUB_DEBUG=y
# CONFIG_COMPAT_BRK is not set
# CONFIG_SLAB is not set
CONFIG_SLUB=y
CONFIG_SLUB_CPU_PARTIAL=y
CONFIG_SYSTEM_DATA_VERIFICATION=y
CONFIG_PROFILING=y
CONFIG_TRACEPOINTS=y
CONFIG_KEXEC_CORE=y
CONFIG_OPROFILE=m
CONFIG_OPROFILE_EVENT_MULTIPLEX=y
CONFIG_HAVE_OPROFILE=y
CONFIG_OPROFILE_NMI_TIMER=y
CONFIG_KPROBES=y
CONFIG_JUMP_LABEL=y
# CONFIG_STATIC_KEYS_SELFTEST is not set
CONFIG_OPTPROBES=y
CONFIG_KPROBES_ON_FTRACE=y
CONFIG_UPROBES=y
# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_ARCH_USE_BUILTIN_BSWAP=y
CONFIG_KRETPROBES=y
CONFIG_USER_RETURN_NOTIFIER=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_OPTPROBES=y
CONFIG_HAVE_KPROBES_ON_FTRACE=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_ATTRS=y
CONFIG_HAVE_DMA_CONTIGUOUS=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
CONFIG_ARCH_WANTS_DYNAMIC_TASK_STRUCT=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_DMA_API_DEBUG=y
CONFIG_HAVE_HW_BREAKPOINT=y
CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y
CONFIG_HAVE_USER_RETURN_NOTIFIER=y
CONFIG_HAVE_PERF_EVENTS_NMI=y
CONFIG_HAVE_PERF_REGS=y
CONFIG_HAVE_PERF_USER_STACK_DUMP=y
CONFIG_HAVE_ARCH_JUMP_LABEL=y
CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y
CONFIG_HAVE_ALIGNED_STRUCT_PAGE=y
CONFIG_HAVE_CMPXCHG_LOCAL=y
CONFIG_HAVE_CMPXCHG_DOUBLE=y
CONFIG_ARCH_WANT_COMPAT_IPC_PARSE_VERSION=y
CONFIG_ARCH_WANT_OLD_COMPAT_IPC=y
CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
CONFIG_SECCOMP_FILTER=y
CONFIG_HAVE_CC_STACKPROTECTOR=y
CONFIG_CC_STACKPROTECTOR=y
# CONFIG_CC_STACKPROTECTOR_NONE is not set
# CONFIG_CC_STACKPROTECTOR_REGULAR is not set
CONFIG_CC_STACKPROTECTOR_STRONG=y
CONFIG_HAVE_CONTEXT_TRACKING=y
CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=y
CONFIG_HAVE_ARCH_HUGE_VMAP=y
CONFIG_HAVE_ARCH_SOFT_DIRTY=y
CONFIG_MODULES_USE_ELF_RELA=y
CONFIG_HAVE_IRQ_EXIT_ON_IRQ_STACK=y
CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
CONFIG_HAVE_COPY_THREAD_TLS=y
CONFIG_OLD_SIGSUSPEND3=y
CONFIG_COMPAT_OLD_SIGACTION=y
#
# GCOV-based kernel profiling
#
# CONFIG_GCOV_KERNEL is not set
CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
CONFIG_MODULE_FORCE_LOAD=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
CONFIG_MODVERSIONS=y
CONFIG_MODULE_SRCVERSION_ALL=y
CONFIG_MODULE_SIG=y
# CONFIG_MODULE_SIG_FORCE is not set
CONFIG_MODULE_SIG_ALL=y
# CONFIG_MODULE_SIG_SHA1 is not set
# CONFIG_MODULE_SIG_SHA224 is not set
CONFIG_MODULE_SIG_SHA256=y
# CONFIG_MODULE_SIG_SHA384 is not set
# CONFIG_MODULE_SIG_SHA512 is not set
CONFIG_MODULE_SIG_HASH="sha256"
# CONFIG_MODULE_COMPRESS is not set
CONFIG_MODULES_TREE_LOOKUP=y
CONFIG_BLOCK=y
CONFIG_BLK_DEV_BSG=y
CONFIG_BLK_DEV_BSGLIB=y
CONFIG_BLK_DEV_INTEGRITY=y
CONFIG_BLK_DEV_THROTTLING=y
# CONFIG_BLK_CMDLINE_PARSER is not set
#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
# CONFIG_AIX_PARTITION is not set
CONFIG_OSF_PARTITION=y
CONFIG_AMIGA_PARTITION=y
# CONFIG_ATARI_PARTITION is not set
CONFIG_MAC_PARTITION=y
CONFIG_MSDOS_PARTITION=y
CONFIG_BSD_DISKLABEL=y
CONFIG_MINIX_SUBPARTITION=y
CONFIG_SOLARIS_X86_PARTITION=y
CONFIG_UNIXWARE_DISKLABEL=y
# CONFIG_LDM_PARTITION is not set
CONFIG_SGI_PARTITION=y
# CONFIG_ULTRIX_PARTITION is not set
CONFIG_SUN_PARTITION=y
CONFIG_KARMA_PARTITION=y
CONFIG_EFI_PARTITION=y
# CONFIG_SYSV68_PARTITION is not set
# CONFIG_CMDLINE_PARTITION is not set
CONFIG_BLOCK_COMPAT=y
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
CONFIG_CFQ_GROUP_IOSCHED=y
CONFIG_DEFAULT_DEADLINE=y
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="deadline"
CONFIG_PREEMPT_NOTIFIERS=y
CONFIG_PADATA=y
CONFIG_ASN1=y
CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
CONFIG_INLINE_READ_UNLOCK=y
CONFIG_INLINE_READ_UNLOCK_IRQ=y
CONFIG_INLINE_WRITE_UNLOCK=y
CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
CONFIG_MUTEX_SPIN_ON_OWNER=y
CONFIG_RWSEM_SPIN_ON_OWNER=y
CONFIG_LOCK_SPIN_ON_OWNER=y
CONFIG_ARCH_USE_QUEUED_SPINLOCKS=y
CONFIG_QUEUED_SPINLOCKS=y
CONFIG_ARCH_USE_QUEUED_RWLOCKS=y
CONFIG_QUEUED_RWLOCKS=y
CONFIG_FREEZER=y
#
# Processor type and features
#
CONFIG_ZONE_DMA=y
CONFIG_SMP=y
CONFIG_X86_FEATURE_NAMES=y
CONFIG_X86_X2APIC=y
CONFIG_X86_MPPARSE=y
CONFIG_X86_EXTENDED_PLATFORM=y
# CONFIG_X86_NUMACHIP is not set
# CONFIG_X86_VSMP is not set
CONFIG_X86_UV=y
# CONFIG_X86_GOLDFISH is not set
CONFIG_X86_INTEL_LPSS=y
# CONFIG_X86_AMD_PLATFORM_DEVICE is not set
# CONFIG_IOSF_MBI is not set
CONFIG_X86_SUPPORTS_MEMORY_FAILURE=y
CONFIG_SCHED_OMIT_FRAME_POINTER=y
CONFIG_HYPERVISOR_GUEST=y
CONFIG_PARAVIRT=y
# CONFIG_PARAVIRT_DEBUG is not set
CONFIG_PARAVIRT_SPINLOCKS=y
CONFIG_XEN=y
CONFIG_XEN_DOM0=y
CONFIG_XEN_PVHVM=y
CONFIG_XEN_512GB=y
CONFIG_XEN_SAVE_RESTORE=y
# CONFIG_XEN_DEBUG_FS is not set
# CONFIG_XEN_PVH is not set
CONFIG_KVM_GUEST=y
# CONFIG_KVM_DEBUG_FS is not set
CONFIG_PARAVIRT_TIME_ACCOUNTING=y
CONFIG_PARAVIRT_CLOCK=y
CONFIG_NO_BOOTMEM=y
# CONFIG_MK8 is not set
# CONFIG_MPSC is not set
# CONFIG_MCORE2 is not set
# CONFIG_MATOM is not set
CONFIG_GENERIC_CPU=y
CONFIG_X86_INTERNODE_CACHE_SHIFT=6
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_X86_TSC=y
CONFIG_X86_CMPXCHG64=y
CONFIG_X86_CMOV=y
CONFIG_X86_MINIMUM_CPU_FAMILY=64
CONFIG_X86_DEBUGCTLMSR=y
CONFIG_CPU_SUP_INTEL=y
CONFIG_CPU_SUP_AMD=y
CONFIG_CPU_SUP_CENTAUR=y
CONFIG_HPET_TIMER=y
CONFIG_HPET_EMULATE_RTC=y
CONFIG_DMI=y
CONFIG_GART_IOMMU=y
# CONFIG_CALGARY_IOMMU is not set
CONFIG_SWIOTLB=y
CONFIG_IOMMU_HELPER=y
CONFIG_MAXSMP=y
CONFIG_NR_CPUS=8192
CONFIG_SCHED_SMT=y
CONFIG_SCHED_MC=y
# CONFIG_PREEMPT_NONE is not set
CONFIG_PREEMPT_VOLUNTARY=y
# CONFIG_PREEMPT is not set
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS=y
CONFIG_X86_MCE=y
CONFIG_X86_MCE_INTEL=y
CONFIG_X86_MCE_AMD=y
CONFIG_X86_MCE_THRESHOLD=y
CONFIG_X86_MCE_INJECT=m
CONFIG_X86_THERMAL_VECTOR=y
# CONFIG_VM86 is not set
CONFIG_X86_16BIT=y
CONFIG_X86_ESPFIX64=y
CONFIG_X86_VSYSCALL_EMULATION=y
CONFIG_I8K=m
CONFIG_MICROCODE=y
CONFIG_MICROCODE_INTEL=y
CONFIG_MICROCODE_AMD=y
CONFIG_MICROCODE_OLD_INTERFACE=y
CONFIG_X86_MSR=y
CONFIG_X86_CPUID=y
CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
CONFIG_ARCH_DMA_ADDR_T_64BIT=y
CONFIG_X86_DIRECT_GBPAGES=y
CONFIG_NUMA=y
CONFIG_AMD_NUMA=y
CONFIG_X86_64_ACPI_NUMA=y
CONFIG_NODES_SPAN_OTHER_NODES=y
# CONFIG_NUMA_EMU is not set
CONFIG_NODES_SHIFT=10
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_DEFAULT=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ARCH_MEMORY_PROBE=y
CONFIG_ARCH_PROC_KCORE_TEXT=y
CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_SPARSEMEM_MANUAL=y
CONFIG_SPARSEMEM=y
CONFIG_NEED_MULTIPLE_NODES=y
CONFIG_HAVE_MEMORY_PRESENT=y
CONFIG_SPARSEMEM_EXTREME=y
CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
CONFIG_SPARSEMEM_ALLOC_MEM_MAP_TOGETHER=y
CONFIG_SPARSEMEM_VMEMMAP=y
CONFIG_HAVE_MEMBLOCK=y
CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
CONFIG_ARCH_DISCARD_MEMBLOCK=y
CONFIG_MEMORY_ISOLATION=y
CONFIG_MOVABLE_NODE=y
CONFIG_HAVE_BOOTMEM_INFO_NODE=y
CONFIG_MEMORY_HOTPLUG=y
CONFIG_MEMORY_HOTPLUG_SPARSE=y
CONFIG_MEMORY_HOTREMOVE=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_ARCH_ENABLE_SPLIT_PMD_PTLOCK=y
CONFIG_MEMORY_BALLOON=y
CONFIG_BALLOON_COMPACTION=y
CONFIG_COMPACTION=y
CONFIG_MIGRATION=y
CONFIG_ARCH_ENABLE_HUGEPAGE_MIGRATION=y
CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_MMU_NOTIFIER=y
CONFIG_KSM=y
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=y
CONFIG_MEMORY_FAILURE=y
CONFIG_HWPOISON_INJECT=m
CONFIG_TRANSPARENT_HUGEPAGE=y
CONFIG_TRANSPARENT_HUGEPAGE_ALWAYS=y
# CONFIG_TRANSPARENT_HUGEPAGE_MADVISE is not set
CONFIG_CLEANCACHE=y
CONFIG_FRONTSWAP=y
CONFIG_CMA=y
# CONFIG_CMA_DEBUG is not set
# CONFIG_CMA_DEBUGFS is not set
CONFIG_CMA_AREAS=7
CONFIG_ZSWAP=y
CONFIG_ZPOOL=y
CONFIG_ZBUD=y
CONFIG_ZSMALLOC=y
# CONFIG_PGTABLE_MAPPING is not set
# CONFIG_ZSMALLOC_STAT is not set
CONFIG_GENERIC_EARLY_IOREMAP=y
CONFIG_ARCH_SUPPORTS_DEFERRED_STRUCT_PAGE_INIT=y
# CONFIG_DEFERRED_STRUCT_PAGE_INIT is not set
# CONFIG_IDLE_PAGE_TRACKING is not set
CONFIG_FRAME_VECTOR=y
# CONFIG_X86_PMEM_LEGACY is not set
CONFIG_X86_CHECK_BIOS_CORRUPTION=y
# CONFIG_X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK is not set
CONFIG_X86_RESERVE_LOW=64
CONFIG_MTRR=y
CONFIG_MTRR_SANITIZER=y
CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=1
CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1
CONFIG_X86_PAT=y
CONFIG_ARCH_USES_PG_UNCACHED=y
CONFIG_ARCH_RANDOM=y
CONFIG_X86_SMAP=y
# CONFIG_X86_INTEL_MPX is not set
CONFIG_EFI=y
CONFIG_EFI_STUB=y
# CONFIG_EFI_MIXED is not set
CONFIG_SECCOMP=y
# CONFIG_HZ_100 is not set
# CONFIG_HZ_250 is not set
# CONFIG_HZ_300 is not set
CONFIG_HZ_1000=y
CONFIG_HZ=1000
CONFIG_SCHED_HRTICK=y
CONFIG_KEXEC=y
CONFIG_KEXEC_FILE=y
CONFIG_KEXEC_VERIFY_SIG=y
CONFIG_KEXEC_BZIMAGE_VERIFY_SIG=y
CONFIG_CRASH_DUMP=y
CONFIG_KEXEC_JUMP=y
CONFIG_PHYSICAL_START=0x1000000
CONFIG_RELOCATABLE=y
# CONFIG_RANDOMIZE_BASE is not set
CONFIG_PHYSICAL_ALIGN=0x1000000
CONFIG_HOTPLUG_CPU=y
CONFIG_BOOTPARAM_HOTPLUG_CPU0=y
# CONFIG_DEBUG_HOTPLUG_CPU0 is not set
# CONFIG_COMPAT_VDSO is not set
# CONFIG_LEGACY_VSYSCALL_NATIVE is not set
CONFIG_LEGACY_VSYSCALL_EMULATE=y
# CONFIG_LEGACY_VSYSCALL_NONE is not set
# CONFIG_CMDLINE_BOOL is not set
CONFIG_MODIFY_LDT_SYSCALL=y
CONFIG_HAVE_LIVEPATCH=y
# CONFIG_LIVEPATCH is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
CONFIG_USE_PERCPU_NUMA_NODE_ID=y
#
# Power management and ACPI options
#
CONFIG_ARCH_HIBERNATION_HEADER=y
CONFIG_SUSPEND=y
CONFIG_SUSPEND_FREEZER=y
CONFIG_HIBERNATE_CALLBACKS=y
CONFIG_HIBERNATION=y
CONFIG_PM_STD_PARTITION=""
CONFIG_PM_SLEEP=y
CONFIG_PM_SLEEP_SMP=y
# CONFIG_PM_AUTOSLEEP is not set
# CONFIG_PM_WAKELOCKS is not set
CONFIG_PM=y
# CONFIG_PM_DEBUG is not set
CONFIG_PM_CLK=y
# CONFIG_WQ_POWER_EFFICIENT_DEFAULT is not set
CONFIG_ACPI=y
CONFIG_ACPI_LEGACY_TABLES_LOOKUP=y
CONFIG_ARCH_MIGHT_HAVE_ACPI_PDC=y
CONFIG_ACPI_SYSTEM_POWER_STATES_SUPPORT=y
# CONFIG_ACPI_DEBUGGER is not set
CONFIG_ACPI_SLEEP=y
# CONFIG_ACPI_PROCFS_POWER is not set
CONFIG_ACPI_REV_OVERRIDE_POSSIBLE=y
CONFIG_ACPI_EC_DEBUGFS=m
CONFIG_ACPI_AC=y
CONFIG_ACPI_BATTERY=y
CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_VIDEO=m
CONFIG_ACPI_FAN=y
CONFIG_ACPI_DOCK=y
CONFIG_ACPI_CPU_FREQ_PSS=y
CONFIG_ACPI_PROCESSOR_IDLE=y
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_IPMI=m
CONFIG_ACPI_HOTPLUG_CPU=y
CONFIG_ACPI_PROCESSOR_AGGREGATOR=m
CONFIG_ACPI_THERMAL=y
CONFIG_ACPI_NUMA=y
# CONFIG_ACPI_CUSTOM_DSDT is not set
CONFIG_ACPI_INITRD_TABLE_OVERRIDE=y
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_PCI_SLOT=y
CONFIG_X86_PM_TIMER=y
CONFIG_ACPI_CONTAINER=y
CONFIG_ACPI_HOTPLUG_MEMORY=y
CONFIG_ACPI_HOTPLUG_IOAPIC=y
CONFIG_ACPI_SBS=m
CONFIG_ACPI_HED=y
CONFIG_ACPI_CUSTOM_METHOD=m
CONFIG_ACPI_BGRT=y
# CONFIG_ACPI_REDUCED_HARDWARE_ONLY is not set
# CONFIG_ACPI_NFIT is not set
CONFIG_HAVE_ACPI_APEI=y
CONFIG_HAVE_ACPI_APEI_NMI=y
CONFIG_ACPI_APEI=y
CONFIG_ACPI_APEI_GHES=y
CONFIG_ACPI_APEI_PCIEAER=y
CONFIG_ACPI_APEI_MEMORY_FAILURE=y
CONFIG_ACPI_APEI_EINJ=m
# CONFIG_ACPI_APEI_ERST_DEBUG is not set
CONFIG_ACPI_EXTLOG=m
# CONFIG_PMIC_OPREGION is not set
CONFIG_SFI=y
#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_GOV_COMMON=y
CONFIG_CPU_FREQ_STAT=m
CONFIG_CPU_FREQ_STAT_DETAILS=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=y
CONFIG_CPU_FREQ_GOV_USERSPACE=y
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
#
# CPU frequency scaling drivers
#
CONFIG_X86_INTEL_PSTATE=y
CONFIG_X86_PCC_CPUFREQ=m
CONFIG_X86_ACPI_CPUFREQ=m
CONFIG_X86_ACPI_CPUFREQ_CPB=y
CONFIG_X86_POWERNOW_K8=m
CONFIG_X86_AMD_FREQ_SENSITIVITY=m
# CONFIG_X86_SPEEDSTEP_CENTRINO is not set
CONFIG_X86_P4_CLOCKMOD=m
#
# shared options
#
CONFIG_X86_SPEEDSTEP_LIB=m
#
# CPU Idle
#
CONFIG_CPU_IDLE=y
# CONFIG_CPU_IDLE_GOV_LADDER is not set
CONFIG_CPU_IDLE_GOV_MENU=y
# CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED is not set
CONFIG_INTEL_IDLE=y
#
# Memory power savings
#
CONFIG_I7300_IDLE_IOAT_CHANNEL=y
CONFIG_I7300_IDLE=m
#
# Bus options (PCI etc.)
#
CONFIG_PCI=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
CONFIG_PCI_XEN=y
CONFIG_PCI_DOMAINS=y
CONFIG_PCIEPORTBUS=y
CONFIG_HOTPLUG_PCI_PCIE=y
CONFIG_PCIEAER=y
CONFIG_PCIE_ECRC=y
CONFIG_PCIEAER_INJECT=m
CONFIG_PCIEASPM=y
# CONFIG_PCIEASPM_DEBUG is not set
CONFIG_PCIEASPM_DEFAULT=y
# CONFIG_PCIEASPM_POWERSAVE is not set
# CONFIG_PCIEASPM_PERFORMANCE is not set
CONFIG_PCIE_PME=y
CONFIG_PCI_BUS_ADDR_T_64BIT=y
CONFIG_PCI_MSI=y
CONFIG_PCI_MSI_IRQ_DOMAIN=y
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_REALLOC_ENABLE_AUTO is not set
CONFIG_PCI_STUB=y
# CONFIG_XEN_PCIDEV_FRONTEND is not set
CONFIG_HT_IRQ=y
CONFIG_PCI_ATS=y
CONFIG_PCI_IOV=y
CONFIG_PCI_PRI=y
CONFIG_PCI_PASID=y
CONFIG_PCI_LABEL=y
#
# PCI host controller drivers
#
CONFIG_ISA_DMA_API=y
CONFIG_AMD_NB=y
CONFIG_PCCARD=y
# CONFIG_PCMCIA is not set
CONFIG_CARDBUS=y
#
# PC-card bridges
#
CONFIG_YENTA=m
CONFIG_YENTA_O2=y
CONFIG_YENTA_RICOH=y
CONFIG_YENTA_TI=y
CONFIG_YENTA_ENE_TUNE=y
CONFIG_YENTA_TOSHIBA=y
CONFIG_HOTPLUG_PCI=y
CONFIG_HOTPLUG_PCI_ACPI=y
CONFIG_HOTPLUG_PCI_ACPI_IBM=m
# CONFIG_HOTPLUG_PCI_CPCI is not set
CONFIG_HOTPLUG_PCI_SHPC=m
# CONFIG_RAPIDIO is not set
# CONFIG_X86_SYSFB is not set
#
# Executable file formats / Emulations
#
CONFIG_BINFMT_ELF=y
CONFIG_COMPAT_BINFMT_ELF=y
CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
CONFIG_BINFMT_SCRIPT=y
# CONFIG_HAVE_AOUT is not set
CONFIG_BINFMT_MISC=m
CONFIG_COREDUMP=y
CONFIG_IA32_EMULATION=y
# CONFIG_IA32_AOUT is not set
# CONFIG_X86_X32 is not set
CONFIG_COMPAT=y
CONFIG_COMPAT_FOR_U64_ALIGNMENT=y
CONFIG_SYSVIPC_COMPAT=y
CONFIG_KEYS_COMPAT=y
CONFIG_X86_DEV_DMA_OPS=y
CONFIG_PMC_ATOM=y
CONFIG_NET=y
CONFIG_COMPAT_NETLINK_MESSAGES=y
CONFIG_NET_INGRESS=y
#
# Networking options
#
CONFIG_PACKET=y
CONFIG_PACKET_DIAG=m
CONFIG_UNIX=y
CONFIG_UNIX_DIAG=m
CONFIG_XFRM=y
CONFIG_XFRM_ALGO=y
CONFIG_XFRM_USER=y
CONFIG_XFRM_SUB_POLICY=y
CONFIG_XFRM_MIGRATE=y
CONFIG_XFRM_STATISTICS=y
CONFIG_XFRM_IPCOMP=m
CONFIG_NET_KEY=m
CONFIG_NET_KEY_MIGRATE=y
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_IP_FIB_TRIE_STATS=y
CONFIG_IP_MULTIPLE_TABLES=y
CONFIG_IP_ROUTE_MULTIPATH=y
CONFIG_IP_ROUTE_VERBOSE=y
CONFIG_IP_ROUTE_CLASSID=y
# CONFIG_IP_PNP is not set
CONFIG_NET_IPIP=m
CONFIG_NET_IPGRE_DEMUX=m
CONFIG_NET_IP_TUNNEL=m
CONFIG_NET_IPGRE=m
CONFIG_NET_IPGRE_BROADCAST=y
CONFIG_IP_MROUTE=y
CONFIG_IP_MROUTE_MULTIPLE_TABLES=y
CONFIG_IP_PIMSM_V1=y
CONFIG_IP_PIMSM_V2=y
CONFIG_SYN_COOKIES=y
CONFIG_NET_IPVTI=m
CONFIG_NET_UDP_TUNNEL=m
# CONFIG_NET_FOU is not set
# CONFIG_NET_FOU_IP_TUNNELS is not set
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
CONFIG_INET_XFRM_TUNNEL=m
CONFIG_INET_TUNNEL=m
CONFIG_INET_XFRM_MODE_TRANSPORT=m
CONFIG_INET_XFRM_MODE_TUNNEL=m
CONFIG_INET_XFRM_MODE_BEET=m
CONFIG_INET_LRO=y
CONFIG_INET_DIAG=m
CONFIG_INET_TCP_DIAG=m
CONFIG_INET_UDP_DIAG=m
CONFIG_TCP_CONG_ADVANCED=y
CONFIG_TCP_CONG_BIC=m
CONFIG_TCP_CONG_CUBIC=y
CONFIG_TCP_CONG_WESTWOOD=m
CONFIG_TCP_CONG_HTCP=m
CONFIG_TCP_CONG_HSTCP=m
CONFIG_TCP_CONG_HYBLA=m
CONFIG_TCP_CONG_VEGAS=m
CONFIG_TCP_CONG_SCALABLE=m
CONFIG_TCP_CONG_LP=m
CONFIG_TCP_CONG_VENO=m
CONFIG_TCP_CONG_YEAH=m
CONFIG_TCP_CONG_ILLINOIS=m
CONFIG_TCP_CONG_DCTCP=m
# CONFIG_TCP_CONG_CDG is not set
CONFIG_DEFAULT_CUBIC=y
# CONFIG_DEFAULT_RENO is not set
CONFIG_DEFAULT_TCP_CONG="cubic"
CONFIG_TCP_MD5SIG=y
CONFIG_IPV6=y
CONFIG_IPV6_ROUTER_PREF=y
CONFIG_IPV6_ROUTE_INFO=y
CONFIG_IPV6_OPTIMISTIC_DAD=y
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
CONFIG_IPV6_MIP6=m
# CONFIG_IPV6_ILA is not set
CONFIG_INET6_XFRM_TUNNEL=m
CONFIG_INET6_TUNNEL=m
CONFIG_INET6_XFRM_MODE_TRANSPORT=m
CONFIG_INET6_XFRM_MODE_TUNNEL=m
CONFIG_INET6_XFRM_MODE_BEET=m
CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
CONFIG_IPV6_VTI=m
CONFIG_IPV6_SIT=m
CONFIG_IPV6_SIT_6RD=y
CONFIG_IPV6_NDISC_NODETYPE=y
CONFIG_IPV6_TUNNEL=m
CONFIG_IPV6_GRE=m
CONFIG_IPV6_MULTIPLE_TABLES=y
# CONFIG_IPV6_SUBTREES is not set
CONFIG_IPV6_MROUTE=y
CONFIG_IPV6_MROUTE_MULTIPLE_TABLES=y
CONFIG_IPV6_PIMSM_V2=y
CONFIG_NETLABEL=y
CONFIG_NETWORK_SECMARK=y
CONFIG_NET_PTP_CLASSIFY=y
CONFIG_NETWORK_PHY_TIMESTAMPING=y
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
CONFIG_NETFILTER_ADVANCED=y
CONFIG_BRIDGE_NETFILTER=m
#
# Core Netfilter Configuration
#
CONFIG_NETFILTER_INGRESS=y
CONFIG_NETFILTER_NETLINK=m
CONFIG_NETFILTER_NETLINK_ACCT=m
CONFIG_NETFILTER_NETLINK_QUEUE=m
CONFIG_NETFILTER_NETLINK_LOG=m
CONFIG_NF_CONNTRACK=m
CONFIG_NF_LOG_COMMON=m
CONFIG_NF_CONNTRACK_MARK=y
CONFIG_NF_CONNTRACK_SECMARK=y
CONFIG_NF_CONNTRACK_ZONES=y
CONFIG_NF_CONNTRACK_PROCFS=y
CONFIG_NF_CONNTRACK_EVENTS=y
# CONFIG_NF_CONNTRACK_TIMEOUT is not set
CONFIG_NF_CONNTRACK_TIMESTAMP=y
CONFIG_NF_CONNTRACK_LABELS=y
CONFIG_NF_CT_PROTO_DCCP=m
CONFIG_NF_CT_PROTO_GRE=m
CONFIG_NF_CT_PROTO_SCTP=m
CONFIG_NF_CT_PROTO_UDPLITE=m
CONFIG_NF_CONNTRACK_AMANDA=m
CONFIG_NF_CONNTRACK_FTP=m
CONFIG_NF_CONNTRACK_H323=m
CONFIG_NF_CONNTRACK_IRC=m
CONFIG_NF_CONNTRACK_BROADCAST=m
CONFIG_NF_CONNTRACK_NETBIOS_NS=m
CONFIG_NF_CONNTRACK_SNMP=m
CONFIG_NF_CONNTRACK_PPTP=m
CONFIG_NF_CONNTRACK_SANE=m
CONFIG_NF_CONNTRACK_SIP=m
CONFIG_NF_CONNTRACK_TFTP=m
CONFIG_NF_CT_NETLINK=m
# CONFIG_NF_CT_NETLINK_TIMEOUT is not set
# CONFIG_NETFILTER_NETLINK_GLUE_CT is not set
CONFIG_NF_NAT=m
CONFIG_NF_NAT_NEEDED=y
CONFIG_NF_NAT_PROTO_DCCP=m
CONFIG_NF_NAT_PROTO_UDPLITE=m
CONFIG_NF_NAT_PROTO_SCTP=m
CONFIG_NF_NAT_AMANDA=m
CONFIG_NF_NAT_FTP=m
CONFIG_NF_NAT_IRC=m
CONFIG_NF_NAT_SIP=m
CONFIG_NF_NAT_TFTP=m
CONFIG_NF_NAT_REDIRECT=m
CONFIG_NETFILTER_SYNPROXY=m
CONFIG_NF_TABLES=m
CONFIG_NF_TABLES_INET=m
# CONFIG_NF_TABLES_NETDEV is not set
CONFIG_NFT_EXTHDR=m
CONFIG_NFT_META=m
CONFIG_NFT_CT=m
CONFIG_NFT_RBTREE=m
CONFIG_NFT_HASH=m
CONFIG_NFT_COUNTER=m
CONFIG_NFT_LOG=m
CONFIG_NFT_LIMIT=m
# CONFIG_NFT_MASQ is not set
# CONFIG_NFT_REDIR is not set
CONFIG_NFT_NAT=m
CONFIG_NFT_QUEUE=m
# CONFIG_NFT_REJECT is not set
# CONFIG_NFT_REJECT_INET is not set
CONFIG_NFT_COMPAT=m
CONFIG_NETFILTER_XTABLES=y
#
# Xtables combined modules
#
CONFIG_NETFILTER_XT_MARK=m
CONFIG_NETFILTER_XT_CONNMARK=m
CONFIG_NETFILTER_XT_SET=m
#
# Xtables targets
#
CONFIG_NETFILTER_XT_TARGET_AUDIT=m
CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m
CONFIG_NETFILTER_XT_TARGET_CT=m
CONFIG_NETFILTER_XT_TARGET_DSCP=m
CONFIG_NETFILTER_XT_TARGET_HL=m
CONFIG_NETFILTER_XT_TARGET_HMARK=m
CONFIG_NETFILTER_XT_TARGET_IDLETIMER=m
CONFIG_NETFILTER_XT_TARGET_LED=m
CONFIG_NETFILTER_XT_TARGET_LOG=m
CONFIG_NETFILTER_XT_TARGET_MARK=m
CONFIG_NETFILTER_XT_NAT=m
CONFIG_NETFILTER_XT_TARGET_NETMAP=m
CONFIG_NETFILTER_XT_TARGET_NFLOG=m
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
CONFIG_NETFILTER_XT_TARGET_RATEEST=m
CONFIG_NETFILTER_XT_TARGET_REDIRECT=m
CONFIG_NETFILTER_XT_TARGET_TEE=m
CONFIG_NETFILTER_XT_TARGET_TPROXY=m
CONFIG_NETFILTER_XT_TARGET_TRACE=m
CONFIG_NETFILTER_XT_TARGET_SECMARK=m
CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
#
# Xtables matches
#
CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=m
CONFIG_NETFILTER_XT_MATCH_BPF=m
CONFIG_NETFILTER_XT_MATCH_CGROUP=m
CONFIG_NETFILTER_XT_MATCH_CLUSTER=m
CONFIG_NETFILTER_XT_MATCH_COMMENT=m
CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
CONFIG_NETFILTER_XT_MATCH_CONNLABEL=m
CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
CONFIG_NETFILTER_XT_MATCH_CPU=m
CONFIG_NETFILTER_XT_MATCH_DCCP=m
CONFIG_NETFILTER_XT_MATCH_DEVGROUP=m
CONFIG_NETFILTER_XT_MATCH_DSCP=m
CONFIG_NETFILTER_XT_MATCH_ECN=m
CONFIG_NETFILTER_XT_MATCH_ESP=m
CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
CONFIG_NETFILTER_XT_MATCH_HELPER=m
CONFIG_NETFILTER_XT_MATCH_HL=m
# CONFIG_NETFILTER_XT_MATCH_IPCOMP is not set
CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
CONFIG_NETFILTER_XT_MATCH_IPVS=m
CONFIG_NETFILTER_XT_MATCH_L2TP=m
CONFIG_NETFILTER_XT_MATCH_LENGTH=m
CONFIG_NETFILTER_XT_MATCH_LIMIT=m
CONFIG_NETFILTER_XT_MATCH_MAC=m
CONFIG_NETFILTER_XT_MATCH_MARK=m
CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
CONFIG_NETFILTER_XT_MATCH_NFACCT=m
CONFIG_NETFILTER_XT_MATCH_OSF=m
CONFIG_NETFILTER_XT_MATCH_OWNER=m
CONFIG_NETFILTER_XT_MATCH_POLICY=m
CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m
CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
CONFIG_NETFILTER_XT_MATCH_QUOTA=m
CONFIG_NETFILTER_XT_MATCH_RATEEST=m
CONFIG_NETFILTER_XT_MATCH_REALM=m
CONFIG_NETFILTER_XT_MATCH_RECENT=m
CONFIG_NETFILTER_XT_MATCH_SCTP=m
CONFIG_NETFILTER_XT_MATCH_SOCKET=m
CONFIG_NETFILTER_XT_MATCH_STATE=m
CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
CONFIG_NETFILTER_XT_MATCH_STRING=m
CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
CONFIG_NETFILTER_XT_MATCH_TIME=m
CONFIG_NETFILTER_XT_MATCH_U32=m
CONFIG_IP_SET=m
CONFIG_IP_SET_MAX=256
CONFIG_IP_SET_BITMAP_IP=m
CONFIG_IP_SET_BITMAP_IPMAC=m
CONFIG_IP_SET_BITMAP_PORT=m
CONFIG_IP_SET_HASH_IP=m
# CONFIG_IP_SET_HASH_IPMARK is not set
CONFIG_IP_SET_HASH_IPPORT=m
CONFIG_IP_SET_HASH_IPPORTIP=m
CONFIG_IP_SET_HASH_IPPORTNET=m
# CONFIG_IP_SET_HASH_MAC is not set
# CONFIG_IP_SET_HASH_NETPORTNET is not set
CONFIG_IP_SET_HASH_NET=m
# CONFIG_IP_SET_HASH_NETNET is not set
CONFIG_IP_SET_HASH_NETPORT=m
CONFIG_IP_SET_HASH_NETIFACE=m
CONFIG_IP_SET_LIST_SET=m
CONFIG_IP_VS=m
CONFIG_IP_VS_IPV6=y
# CONFIG_IP_VS_DEBUG is not set
CONFIG_IP_VS_TAB_BITS=12
#
# IPVS transport protocol load balancing support
#
CONFIG_IP_VS_PROTO_TCP=y
CONFIG_IP_VS_PROTO_UDP=y
CONFIG_IP_VS_PROTO_AH_ESP=y
CONFIG_IP_VS_PROTO_ESP=y
CONFIG_IP_VS_PROTO_AH=y
CONFIG_IP_VS_PROTO_SCTP=y
#
# IPVS scheduler
#
CONFIG_IP_VS_RR=m
CONFIG_IP_VS_WRR=m
CONFIG_IP_VS_LC=m
CONFIG_IP_VS_WLC=m
# CONFIG_IP_VS_FO is not set
# CONFIG_IP_VS_OVF is not set
CONFIG_IP_VS_LBLC=m
CONFIG_IP_VS_LBLCR=m
CONFIG_IP_VS_DH=m
CONFIG_IP_VS_SH=m
CONFIG_IP_VS_SED=m
CONFIG_IP_VS_NQ=m
#
# IPVS SH scheduler
#
CONFIG_IP_VS_SH_TAB_BITS=8
#
# IPVS application helper
#
CONFIG_IP_VS_FTP=m
CONFIG_IP_VS_NFCT=y
CONFIG_IP_VS_PE_SIP=m
#
# IP: Netfilter Configuration
#
CONFIG_NF_DEFRAG_IPV4=m
CONFIG_NF_CONNTRACK_IPV4=m
# CONFIG_NF_CONNTRACK_PROC_COMPAT is not set
CONFIG_NF_TABLES_IPV4=m
CONFIG_NFT_CHAIN_ROUTE_IPV4=m
# CONFIG_NFT_REJECT_IPV4 is not set
# CONFIG_NFT_DUP_IPV4 is not set
# CONFIG_NF_TABLES_ARP is not set
CONFIG_NF_DUP_IPV4=m
# CONFIG_NF_LOG_ARP is not set
CONFIG_NF_LOG_IPV4=m
CONFIG_NF_REJECT_IPV4=m
CONFIG_NF_NAT_IPV4=m
CONFIG_NFT_CHAIN_NAT_IPV4=m
CONFIG_NF_NAT_MASQUERADE_IPV4=m
CONFIG_NF_NAT_SNMP_BASIC=m
CONFIG_NF_NAT_PROTO_GRE=m
CONFIG_NF_NAT_PPTP=m
CONFIG_NF_NAT_H323=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_AH=m
CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_RPFILTER=m
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_SYNPROXY=m
CONFIG_IP_NF_NAT=m
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_NETMAP=m
CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_CLUSTERIP=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_TTL=m
CONFIG_IP_NF_RAW=m
CONFIG_IP_NF_SECURITY=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
#
# IPv6: Netfilter Configuration
#
CONFIG_NF_DEFRAG_IPV6=m
CONFIG_NF_CONNTRACK_IPV6=m
CONFIG_NF_TABLES_IPV6=m
CONFIG_NFT_CHAIN_ROUTE_IPV6=m
# CONFIG_NFT_REJECT_IPV6 is not set
# CONFIG_NFT_DUP_IPV6 is not set
CONFIG_NF_DUP_IPV6=m
CONFIG_NF_REJECT_IPV6=m
CONFIG_NF_LOG_IPV6=m
CONFIG_NF_NAT_IPV6=m
CONFIG_NFT_CHAIN_NAT_IPV6=m
CONFIG_NF_NAT_MASQUERADE_IPV6=m
CONFIG_IP6_NF_IPTABLES=m
CONFIG_IP6_NF_MATCH_AH=m
CONFIG_IP6_NF_MATCH_EUI64=m
CONFIG_IP6_NF_MATCH_FRAG=m
CONFIG_IP6_NF_MATCH_OPTS=m
CONFIG_IP6_NF_MATCH_HL=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
CONFIG_IP6_NF_MATCH_MH=m
CONFIG_IP6_NF_MATCH_RPFILTER=m
CONFIG_IP6_NF_MATCH_RT=m
CONFIG_IP6_NF_TARGET_HL=m
CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_REJECT=m
CONFIG_IP6_NF_TARGET_SYNPROXY=m
CONFIG_IP6_NF_MANGLE=m
CONFIG_IP6_NF_RAW=m
CONFIG_IP6_NF_SECURITY=m
CONFIG_IP6_NF_NAT=m
CONFIG_IP6_NF_TARGET_MASQUERADE=m
# CONFIG_IP6_NF_TARGET_NPT is not set
CONFIG_NF_TABLES_BRIDGE=m
CONFIG_NFT_BRIDGE_META=m
# CONFIG_NF_LOG_BRIDGE is not set
CONFIG_BRIDGE_NF_EBTABLES=m
CONFIG_BRIDGE_EBT_BROUTE=m
CONFIG_BRIDGE_EBT_T_FILTER=m
CONFIG_BRIDGE_EBT_T_NAT=m
CONFIG_BRIDGE_EBT_802_3=m
CONFIG_BRIDGE_EBT_AMONG=m
CONFIG_BRIDGE_EBT_ARP=m
CONFIG_BRIDGE_EBT_IP=m
CONFIG_BRIDGE_EBT_IP6=m
CONFIG_BRIDGE_EBT_LIMIT=m
CONFIG_BRIDGE_EBT_MARK=m
CONFIG_BRIDGE_EBT_PKTTYPE=m
CONFIG_BRIDGE_EBT_STP=m
CONFIG_BRIDGE_EBT_VLAN=m
CONFIG_BRIDGE_EBT_ARPREPLY=m
CONFIG_BRIDGE_EBT_DNAT=m
CONFIG_BRIDGE_EBT_MARK_T=m
CONFIG_BRIDGE_EBT_REDIRECT=m
CONFIG_BRIDGE_EBT_SNAT=m
CONFIG_BRIDGE_EBT_LOG=m
CONFIG_BRIDGE_EBT_NFLOG=m
CONFIG_IP_DCCP=m
CONFIG_INET_DCCP_DIAG=m
#
# DCCP CCIDs Configuration
#
# CONFIG_IP_DCCP_CCID2_DEBUG is not set
CONFIG_IP_DCCP_CCID3=y
# CONFIG_IP_DCCP_CCID3_DEBUG is not set
CONFIG_IP_DCCP_TFRC_LIB=y
#
# DCCP Kernel Hacking
#
# CONFIG_IP_DCCP_DEBUG is not set
# CONFIG_NET_DCCPPROBE is not set
CONFIG_IP_SCTP=m
CONFIG_NET_SCTPPROBE=m
# CONFIG_SCTP_DBG_OBJCNT is not set
# CONFIG_SCTP_DEFAULT_COOKIE_HMAC_MD5 is not set
CONFIG_SCTP_DEFAULT_COOKIE_HMAC_SHA1=y
# CONFIG_SCTP_DEFAULT_COOKIE_HMAC_NONE is not set
CONFIG_SCTP_COOKIE_HMAC_MD5=y
CONFIG_SCTP_COOKIE_HMAC_SHA1=y
# CONFIG_RDS is not set
# CONFIG_TIPC is not set
CONFIG_ATM=m
CONFIG_ATM_CLIP=m
# CONFIG_ATM_CLIP_NO_ICMP is not set
CONFIG_ATM_LANE=m
# CONFIG_ATM_MPOA is not set
CONFIG_ATM_BR2684=m
# CONFIG_ATM_BR2684_IPFILTER is not set
CONFIG_L2TP=m
CONFIG_L2TP_DEBUGFS=m
CONFIG_L2TP_V3=y
CONFIG_L2TP_IP=m
CONFIG_L2TP_ETH=m
CONFIG_STP=m
CONFIG_GARP=m
CONFIG_MRP=m
CONFIG_BRIDGE=m
CONFIG_BRIDGE_IGMP_SNOOPING=y
CONFIG_BRIDGE_VLAN_FILTERING=y
CONFIG_HAVE_NET_DSA=y
CONFIG_VLAN_8021Q=m
CONFIG_VLAN_8021Q_GVRP=y
CONFIG_VLAN_8021Q_MVRP=y
# CONFIG_DECNET is not set
CONFIG_LLC=m
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_PHONET is not set
# CONFIG_6LOWPAN is not set
CONFIG_IEEE802154=m
# CONFIG_IEEE802154_NL802154_EXPERIMENTAL is not set
CONFIG_IEEE802154_SOCKET=m
CONFIG_MAC802154=m
CONFIG_NET_SCHED=y
#
# Queueing/Scheduling
#
CONFIG_NET_SCH_CBQ=m
CONFIG_NET_SCH_HTB=m
CONFIG_NET_SCH_HFSC=m
CONFIG_NET_SCH_ATM=m
CONFIG_NET_SCH_PRIO=m
CONFIG_NET_SCH_MULTIQ=m
CONFIG_NET_SCH_RED=m
CONFIG_NET_SCH_SFB=m
CONFIG_NET_SCH_SFQ=m
CONFIG_NET_SCH_TEQL=m
CONFIG_NET_SCH_TBF=m
CONFIG_NET_SCH_GRED=m
CONFIG_NET_SCH_DSMARK=m
CONFIG_NET_SCH_NETEM=m
CONFIG_NET_SCH_DRR=m
CONFIG_NET_SCH_MQPRIO=m
CONFIG_NET_SCH_CHOKE=m
CONFIG_NET_SCH_QFQ=m
CONFIG_NET_SCH_CODEL=m
CONFIG_NET_SCH_FQ_CODEL=m
CONFIG_NET_SCH_FQ=m
# CONFIG_NET_SCH_HHF is not set
# CONFIG_NET_SCH_PIE is not set
CONFIG_NET_SCH_INGRESS=m
CONFIG_NET_SCH_PLUG=m
#
# Classification
#
CONFIG_NET_CLS=y
CONFIG_NET_CLS_BASIC=m
CONFIG_NET_CLS_TCINDEX=m
CONFIG_NET_CLS_ROUTE4=m
CONFIG_NET_CLS_FW=m
CONFIG_NET_CLS_U32=m
CONFIG_CLS_U32_PERF=y
CONFIG_CLS_U32_MARK=y
CONFIG_NET_CLS_RSVP=m
CONFIG_NET_CLS_RSVP6=m
CONFIG_NET_CLS_FLOW=m
CONFIG_NET_CLS_CGROUP=y
CONFIG_NET_CLS_BPF=m
# CONFIG_NET_CLS_FLOWER is not set
CONFIG_NET_EMATCH=y
CONFIG_NET_EMATCH_STACK=32
CONFIG_NET_EMATCH_CMP=m
CONFIG_NET_EMATCH_NBYTE=m
CONFIG_NET_EMATCH_U32=m
CONFIG_NET_EMATCH_META=m
CONFIG_NET_EMATCH_TEXT=m
CONFIG_NET_EMATCH_IPSET=m
CONFIG_NET_CLS_ACT=y
CONFIG_NET_ACT_POLICE=m
CONFIG_NET_ACT_GACT=m
CONFIG_GACT_PROB=y
CONFIG_NET_ACT_MIRRED=m
CONFIG_NET_ACT_IPT=m
CONFIG_NET_ACT_NAT=m
CONFIG_NET_ACT_PEDIT=m
CONFIG_NET_ACT_SIMP=m
CONFIG_NET_ACT_SKBEDIT=m
CONFIG_NET_ACT_CSUM=m
# CONFIG_NET_ACT_VLAN is not set
# CONFIG_NET_ACT_BPF is not set
# CONFIG_NET_ACT_CONNMARK is not set
CONFIG_NET_CLS_IND=y
CONFIG_NET_SCH_FIFO=y
CONFIG_DCB=y
CONFIG_DNS_RESOLVER=m
# CONFIG_BATMAN_ADV is not set
CONFIG_OPENVSWITCH=m
CONFIG_OPENVSWITCH_GRE=m
CONFIG_OPENVSWITCH_VXLAN=m
CONFIG_OPENVSWITCH_GENEVE=m
CONFIG_VSOCKETS=m
CONFIG_VMWARE_VMCI_VSOCKETS=m
CONFIG_NETLINK_MMAP=y
CONFIG_NETLINK_DIAG=m
CONFIG_MPLS=y
CONFIG_NET_MPLS_GSO=m
# CONFIG_MPLS_ROUTING is not set
# CONFIG_HSR is not set
# CONFIG_NET_SWITCHDEV is not set
# CONFIG_NET_L3_MASTER_DEV is not set
CONFIG_RPS=y
CONFIG_RFS_ACCEL=y
CONFIG_XPS=y
# CONFIG_CGROUP_NET_PRIO is not set
CONFIG_CGROUP_NET_CLASSID=y
CONFIG_NET_RX_BUSY_POLL=y
CONFIG_BQL=y
CONFIG_BPF_JIT=y
CONFIG_NET_FLOW_LIMIT=y
#
# Network testing
#
CONFIG_NET_PKTGEN=m
# CONFIG_NET_TCPPROBE is not set
CONFIG_NET_DROP_MONITOR=y
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
CONFIG_BT=m
CONFIG_BT_BREDR=y
CONFIG_BT_RFCOMM=m
CONFIG_BT_RFCOMM_TTY=y
CONFIG_BT_BNEP=m
CONFIG_BT_BNEP_MC_FILTER=y
CONFIG_BT_BNEP_PROTO_FILTER=y
CONFIG_BT_CMTP=m
CONFIG_BT_HIDP=m
CONFIG_BT_HS=y
CONFIG_BT_LE=y
# CONFIG_BT_SELFTEST is not set
CONFIG_BT_DEBUGFS=y
#
# Bluetooth device drivers
#
CONFIG_BT_INTEL=m
CONFIG_BT_BCM=m
CONFIG_BT_RTL=m
CONFIG_BT_HCIBTUSB=m
CONFIG_BT_HCIBTUSB_BCM=y
CONFIG_BT_HCIBTUSB_RTL=y
CONFIG_BT_HCIBTSDIO=m
CONFIG_BT_HCIUART=m
CONFIG_BT_HCIUART_H4=y
CONFIG_BT_HCIUART_BCSP=y
CONFIG_BT_HCIUART_ATH3K=y
CONFIG_BT_HCIUART_LL=y
CONFIG_BT_HCIUART_3WIRE=y
# CONFIG_BT_HCIUART_INTEL is not set
# CONFIG_BT_HCIUART_BCM is not set
# CONFIG_BT_HCIUART_QCA is not set
CONFIG_BT_HCIBCM203X=m
CONFIG_BT_HCIBPA10X=m
CONFIG_BT_HCIBFUSB=m
CONFIG_BT_HCIVHCI=m
CONFIG_BT_MRVL=m
CONFIG_BT_MRVL_SDIO=m
CONFIG_BT_ATH3K=m
# CONFIG_AF_RXRPC is not set
CONFIG_FIB_RULES=y
CONFIG_WIRELESS=y
CONFIG_WIRELESS_EXT=y
CONFIG_WEXT_CORE=y
CONFIG_WEXT_PROC=y
CONFIG_WEXT_PRIV=y
CONFIG_CFG80211=m
# CONFIG_NL80211_TESTMODE is not set
# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
# CONFIG_CFG80211_REG_DEBUG is not set
CONFIG_CFG80211_DEFAULT_PS=y
# CONFIG_CFG80211_DEBUGFS is not set
# CONFIG_CFG80211_INTERNAL_REGDB is not set
CONFIG_CFG80211_CRDA_SUPPORT=y
CONFIG_CFG80211_WEXT=y
CONFIG_LIB80211=m
# CONFIG_LIB80211_DEBUG is not set
CONFIG_MAC80211=m
CONFIG_MAC80211_HAS_RC=y
CONFIG_MAC80211_RC_MINSTREL=y
CONFIG_MAC80211_RC_MINSTREL_HT=y
# CONFIG_MAC80211_RC_MINSTREL_VHT is not set
CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
CONFIG_MAC80211_RC_DEFAULT="minstrel_ht"
# CONFIG_MAC80211_MESH is not set
CONFIG_MAC80211_LEDS=y
CONFIG_MAC80211_DEBUGFS=y
# CONFIG_MAC80211_MESSAGE_TRACING is not set
# CONFIG_MAC80211_DEBUG_MENU is not set
CONFIG_MAC80211_STA_HASH_MAX_SIZE=0
# CONFIG_WIMAX is not set
CONFIG_RFKILL=m
CONFIG_RFKILL_LEDS=y
CONFIG_RFKILL_INPUT=y
# CONFIG_NET_9P is not set
# CONFIG_CAIF is not set
CONFIG_CEPH_LIB=m
# CONFIG_CEPH_LIB_PRETTYDEBUG is not set
CONFIG_CEPH_LIB_USE_DNS_RESOLVER=y
# CONFIG_NFC is not set
# CONFIG_LWTUNNEL is not set
CONFIG_HAVE_BPF_JIT=y
#
# Device Drivers
#
#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER=y
CONFIG_UEVENT_HELPER_PATH=""
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
# CONFIG_FIRMWARE_IN_KERNEL is not set
CONFIG_EXTRA_FIRMWARE=""
CONFIG_FW_LOADER_USER_HELPER=y
# CONFIG_FW_LOADER_USER_HELPER_FALLBACK is not set
CONFIG_WANT_DEV_COREDUMP=y
CONFIG_ALLOW_DEV_COREDUMP=y
CONFIG_DEV_COREDUMP=y
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
CONFIG_SYS_HYPERVISOR=y
# CONFIG_GENERIC_CPU_DEVICES is not set
CONFIG_GENERIC_CPU_AUTOPROBE=y
CONFIG_REGMAP=y
CONFIG_REGMAP_I2C=m
CONFIG_DMA_SHARED_BUFFER=y
# CONFIG_FENCE_TRACE is not set
# CONFIG_DMA_CMA is not set
#
# Bus devices
#
CONFIG_CONNECTOR=y
CONFIG_PROC_EVENTS=y
CONFIG_MTD=m
# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
# CONFIG_MTD_CMDLINE_PARTS is not set
# CONFIG_MTD_AR7_PARTS is not set
#
# User Modules And Translation Layers
#
CONFIG_MTD_BLKDEVS=m
CONFIG_MTD_BLOCK=m
# CONFIG_MTD_BLOCK_RO is not set
# CONFIG_FTL is not set
# CONFIG_NFTL is not set
# CONFIG_INFTL is not set
# CONFIG_RFD_FTL is not set
# CONFIG_SSFDC is not set
# CONFIG_SM_FTL is not set
# CONFIG_MTD_OOPS is not set
# CONFIG_MTD_SWAP is not set
# CONFIG_MTD_PARTITIONED_MASTER is not set
#
# RAM/ROM/Flash chip drivers
#
# CONFIG_MTD_CFI is not set
# CONFIG_MTD_JEDECPROBE is not set
CONFIG_MTD_MAP_BANK_WIDTH_1=y
CONFIG_MTD_MAP_BANK_WIDTH_2=y
CONFIG_MTD_MAP_BANK_WIDTH_4=y
# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
CONFIG_MTD_CFI_I1=y
CONFIG_MTD_CFI_I2=y
# CONFIG_MTD_CFI_I4 is not set
# CONFIG_MTD_CFI_I8 is not set
# CONFIG_MTD_RAM is not set
# CONFIG_MTD_ROM is not set
# CONFIG_MTD_ABSENT is not set
#
# Mapping drivers for chip access
#
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
# CONFIG_MTD_INTEL_VR_NOR is not set
# CONFIG_MTD_PLATRAM is not set
#
# Self-contained MTD device drivers
#
# CONFIG_MTD_PMC551 is not set
# CONFIG_MTD_SLRAM is not set
# CONFIG_MTD_PHRAM is not set
# CONFIG_MTD_MTDRAM is not set
# CONFIG_MTD_BLOCK2MTD is not set
#
# Disk-On-Chip Device Drivers
#
# CONFIG_MTD_DOCG3 is not set
# CONFIG_MTD_NAND is not set
# CONFIG_MTD_ONENAND is not set
#
# LPDDR & LPDDR2 PCM memory drivers
#
# CONFIG_MTD_LPDDR is not set
# CONFIG_MTD_SPI_NOR is not set
CONFIG_MTD_UBI=m
CONFIG_MTD_UBI_WL_THRESHOLD=4096
CONFIG_MTD_UBI_BEB_LIMIT=20
# CONFIG_MTD_UBI_FASTMAP is not set
# CONFIG_MTD_UBI_GLUEBI is not set
# CONFIG_MTD_UBI_BLOCK is not set
# CONFIG_OF is not set
CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
CONFIG_PARPORT=m
CONFIG_PARPORT_PC=m
CONFIG_PARPORT_SERIAL=m
# CONFIG_PARPORT_PC_FIFO is not set
# CONFIG_PARPORT_PC_SUPERIO is not set
# CONFIG_PARPORT_GSC is not set
# CONFIG_PARPORT_AX88796 is not set
CONFIG_PARPORT_1284=y
CONFIG_PARPORT_NOT_PC=y
CONFIG_PNP=y
# CONFIG_PNP_DEBUG_MESSAGES is not set
#
# Protocols
#
CONFIG_PNPACPI=y
CONFIG_BLK_DEV=y
CONFIG_BLK_DEV_NULL_BLK=m
CONFIG_BLK_DEV_FD=m
# CONFIG_PARIDE is not set
CONFIG_BLK_DEV_PCIESSD_MTIP32XX=m
CONFIG_ZRAM=m
# CONFIG_ZRAM_LZ4_COMPRESS is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_LOOP_MIN_COUNT=0
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_DRBD is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SKD is not set
CONFIG_BLK_DEV_OSD=m
CONFIG_BLK_DEV_SX8=m
CONFIG_BLK_DEV_RAM=m
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=16384
CONFIG_CDROM_PKTCDVD=m
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
CONFIG_ATA_OVER_ETH=m
CONFIG_XEN_BLKDEV_FRONTEND=m
# CONFIG_XEN_BLKDEV_BACKEND is not set
CONFIG_VIRTIO_BLK=m
# CONFIG_BLK_DEV_HD is not set
CONFIG_BLK_DEV_RBD=m
# CONFIG_BLK_DEV_RSXX is not set
CONFIG_BLK_DEV_NVME=m
#
# Misc devices
#
CONFIG_SENSORS_LIS3LV02D=m
# CONFIG_AD525X_DPOT is not set
# CONFIG_DUMMY_IRQ is not set
# CONFIG_IBM_ASM is not set
# CONFIG_PHANTOM is not set
CONFIG_SGI_IOC4=m
CONFIG_TIFM_CORE=m
CONFIG_TIFM_7XX1=m
# CONFIG_ICS932S401 is not set
CONFIG_ENCLOSURE_SERVICES=m
CONFIG_SGI_XP=m
CONFIG_HP_ILO=m
CONFIG_SGI_GRU=m
# CONFIG_SGI_GRU_DEBUG is not set
CONFIG_APDS9802ALS=m
CONFIG_ISL29003=m
CONFIG_ISL29020=m
CONFIG_SENSORS_TSL2550=m
# CONFIG_SENSORS_BH1780 is not set
CONFIG_SENSORS_BH1770=m
CONFIG_SENSORS_APDS990X=m
# CONFIG_HMC6352 is not set
# CONFIG_DS1682 is not set
CONFIG_VMWARE_BALLOON=m
# CONFIG_BMP085_I2C is not set
# CONFIG_USB_SWITCH_FSA9480 is not set
# CONFIG_SRAM is not set
# CONFIG_C2PORT is not set
#
# EEPROM support
#
CONFIG_EEPROM_AT24=m
CONFIG_EEPROM_LEGACY=m
CONFIG_EEPROM_MAX6875=m
CONFIG_EEPROM_93CX6=m
CONFIG_CB710_CORE=m
# CONFIG_CB710_DEBUG is not set
CONFIG_CB710_DEBUG_ASSUMPTIONS=y
#
# Texas Instruments shared transport line discipline
#
CONFIG_SENSORS_LIS3_I2C=m
#
# Altera FPGA firmware download module
#
CONFIG_ALTERA_STAPL=m
CONFIG_INTEL_MEI=m
CONFIG_INTEL_MEI_ME=m
# CONFIG_INTEL_MEI_TXE is not set
CONFIG_VMWARE_VMCI=m
#
# Intel MIC Bus Driver
#
# CONFIG_INTEL_MIC_BUS is not set
#
# SCIF Bus Driver
#
# CONFIG_SCIF_BUS is not set
#
# Intel MIC Host Driver
#
#
# Intel MIC Card Driver
#
#
# SCIF Driver
#
#
# Intel MIC Coprocessor State Management (COSM) Drivers
#
# CONFIG_GENWQE is not set
# CONFIG_ECHO is not set
# CONFIG_CXL_BASE is not set
# CONFIG_CXL_KERNEL_API is not set
# CONFIG_CXL_EEH is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
# SCSI device support
#
CONFIG_SCSI_MOD=y
CONFIG_RAID_ATTRS=m
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
CONFIG_SCSI_NETLINK=y
# CONFIG_SCSI_MQ_DEFAULT is not set
CONFIG_SCSI_PROC_FS=y
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=m
CONFIG_CHR_DEV_ST=m
CONFIG_CHR_DEV_OSST=m
CONFIG_BLK_DEV_SR=m
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=m
CONFIG_CHR_DEV_SCH=m
CONFIG_SCSI_ENCLOSURE=m
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y
CONFIG_SCSI_SCAN_ASYNC=y
#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=m
CONFIG_SCSI_FC_ATTRS=m
CONFIG_SCSI_ISCSI_ATTRS=m
CONFIG_SCSI_SAS_ATTRS=m
CONFIG_SCSI_SAS_LIBSAS=m
CONFIG_SCSI_SAS_ATA=y
CONFIG_SCSI_SAS_HOST_SMP=y
CONFIG_SCSI_SRP_ATTRS=m
CONFIG_SCSI_LOWLEVEL=y
CONFIG_ISCSI_TCP=m
CONFIG_ISCSI_BOOT_SYSFS=m
CONFIG_SCSI_CXGB3_ISCSI=m
CONFIG_SCSI_CXGB4_ISCSI=m
CONFIG_SCSI_BNX2_ISCSI=m
CONFIG_SCSI_BNX2X_FCOE=m
CONFIG_BE2ISCSI=m
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
CONFIG_SCSI_HPSA=m
CONFIG_SCSI_3W_9XXX=m
CONFIG_SCSI_3W_SAS=m
# CONFIG_SCSI_ACARD is not set
CONFIG_SCSI_AACRAID=m
# CONFIG_SCSI_AIC7XXX is not set
CONFIG_SCSI_AIC79XX=m
CONFIG_AIC79XX_CMDS_PER_DEVICE=4
CONFIG_AIC79XX_RESET_DELAY_MS=15000
# CONFIG_AIC79XX_DEBUG_ENABLE is not set
CONFIG_AIC79XX_DEBUG_MASK=0
# CONFIG_AIC79XX_REG_PRETTY_PRINT is not set
# CONFIG_SCSI_AIC94XX is not set
CONFIG_SCSI_MVSAS=m
# CONFIG_SCSI_MVSAS_DEBUG is not set
CONFIG_SCSI_MVSAS_TASKLET=y
CONFIG_SCSI_MVUMI=m
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ADVANSYS is not set
CONFIG_SCSI_ARCMSR=m
# CONFIG_SCSI_ESAS2R is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
CONFIG_MEGARAID_SAS=m
CONFIG_SCSI_MPT3SAS=m
CONFIG_SCSI_MPT2SAS_MAX_SGE=128
CONFIG_SCSI_MPT3SAS_MAX_SGE=128
CONFIG_SCSI_MPT2SAS=m
CONFIG_SCSI_UFSHCD=m
CONFIG_SCSI_UFSHCD_PCI=m
# CONFIG_SCSI_UFSHCD_PLATFORM is not set
CONFIG_SCSI_HPTIOP=m
# CONFIG_SCSI_BUSLOGIC is not set
CONFIG_VMWARE_PVSCSI=m
# CONFIG_XEN_SCSI_FRONTEND is not set
CONFIG_HYPERV_STORAGE=m
CONFIG_LIBFC=m
CONFIG_LIBFCOE=m
CONFIG_FCOE=m
CONFIG_FCOE_FNIC=m
# CONFIG_SCSI_SNIC is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
CONFIG_SCSI_ISCI=m
# CONFIG_SCSI_IPS is not set
CONFIG_SCSI_INITIO=m
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_PPA is not set
# CONFIG_SCSI_IMM is not set
CONFIG_SCSI_STEX=m
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
CONFIG_SCSI_QLA_FC=m
# CONFIG_TCM_QLA2XXX is not set
CONFIG_SCSI_QLA_ISCSI=m
CONFIG_SCSI_LPFC=m
# CONFIG_SCSI_LPFC_DEBUG_FS is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_AM53C974 is not set
# CONFIG_SCSI_WD719X is not set
CONFIG_SCSI_DEBUG=m
CONFIG_SCSI_PMCRAID=m
CONFIG_SCSI_PM8001=m
CONFIG_SCSI_BFA_FC=m
CONFIG_SCSI_VIRTIO=m
# CONFIG_SCSI_CHELSIO_FCOE is not set
CONFIG_SCSI_DH=y
CONFIG_SCSI_DH_RDAC=y
CONFIG_SCSI_DH_HP_SW=y
CONFIG_SCSI_DH_EMC=y
CONFIG_SCSI_DH_ALUA=y
CONFIG_SCSI_OSD_INITIATOR=m
CONFIG_SCSI_OSD_ULD=m
CONFIG_SCSI_OSD_DPRINT_SENSE=1
# CONFIG_SCSI_OSD_DEBUG is not set
CONFIG_ATA=m
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_ATA_VERBOSE_ERROR=y
CONFIG_ATA_ACPI=y
# CONFIG_SATA_ZPODD is not set
CONFIG_SATA_PMP=y
#
# Controllers with non-SFF native interface
#
CONFIG_SATA_AHCI=m
CONFIG_SATA_AHCI_PLATFORM=m
# CONFIG_SATA_INIC162X is not set
CONFIG_SATA_ACARD_AHCI=m
CONFIG_SATA_SIL24=m
CONFIG_ATA_SFF=y
#
# SFF controllers with custom DMA interface
#
CONFIG_PDC_ADMA=m
CONFIG_SATA_QSTOR=m
CONFIG_SATA_SX4=m
CONFIG_ATA_BMDMA=y
#
# SATA SFF controllers with BMDMA
#
CONFIG_ATA_PIIX=m
CONFIG_SATA_MV=m
CONFIG_SATA_NV=m
CONFIG_SATA_PROMISE=m
CONFIG_SATA_SIL=m
CONFIG_SATA_SIS=m
CONFIG_SATA_SVW=m
CONFIG_SATA_ULI=m
CONFIG_SATA_VIA=m
CONFIG_SATA_VITESSE=m
#
# PATA SFF controllers with BMDMA
#
CONFIG_PATA_ALI=m
CONFIG_PATA_AMD=m
CONFIG_PATA_ARTOP=m
CONFIG_PATA_ATIIXP=m
CONFIG_PATA_ATP867X=m
CONFIG_PATA_CMD64X=m
# CONFIG_PATA_CYPRESS is not set
# CONFIG_PATA_EFAR is not set
CONFIG_PATA_HPT366=m
CONFIG_PATA_HPT37X=m
CONFIG_PATA_HPT3X2N=m
CONFIG_PATA_HPT3X3=m
# CONFIG_PATA_HPT3X3_DMA is not set
CONFIG_PATA_IT8213=m
CONFIG_PATA_IT821X=m
CONFIG_PATA_JMICRON=m
CONFIG_PATA_MARVELL=m
CONFIG_PATA_NETCELL=m
CONFIG_PATA_NINJA32=m
# CONFIG_PATA_NS87415 is not set
CONFIG_PATA_OLDPIIX=m
# CONFIG_PATA_OPTIDMA is not set
CONFIG_PATA_PDC2027X=m
CONFIG_PATA_PDC_OLD=m
# CONFIG_PATA_RADISYS is not set
CONFIG_PATA_RDC=m
CONFIG_PATA_SCH=m
CONFIG_PATA_SERVERWORKS=m
CONFIG_PATA_SIL680=m
CONFIG_PATA_SIS=m
CONFIG_PATA_TOSHIBA=m
# CONFIG_PATA_TRIFLEX is not set
CONFIG_PATA_VIA=m
# CONFIG_PATA_WINBOND is not set
#
# PIO-only SFF controllers
#
# CONFIG_PATA_CMD640_PCI is not set
# CONFIG_PATA_MPIIX is not set
# CONFIG_PATA_NS87410 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_RZ1000 is not set
#
# Generic fallback / legacy drivers
#
CONFIG_PATA_ACPI=m
CONFIG_ATA_GENERIC=m
# CONFIG_PATA_LEGACY is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
CONFIG_MD_AUTODETECT=y
CONFIG_MD_LINEAR=m
CONFIG_MD_RAID0=m
CONFIG_MD_RAID1=m
CONFIG_MD_RAID10=m
CONFIG_MD_RAID456=m
# CONFIG_MD_MULTIPATH is not set
CONFIG_MD_FAULTY=m
# CONFIG_MD_CLUSTER is not set
# CONFIG_BCACHE is not set
CONFIG_BLK_DEV_DM_BUILTIN=y
CONFIG_BLK_DEV_DM=m
# CONFIG_DM_MQ_DEFAULT is not set
CONFIG_DM_DEBUG=y
CONFIG_DM_BUFIO=m
CONFIG_DM_BIO_PRISON=m
CONFIG_DM_PERSISTENT_DATA=m
# CONFIG_DM_DEBUG_BLOCK_STACK_TRACING is not set
CONFIG_DM_CRYPT=m
CONFIG_DM_SNAPSHOT=m
CONFIG_DM_THIN_PROVISIONING=m
CONFIG_DM_CACHE=m
CONFIG_DM_CACHE_MQ=m
CONFIG_DM_CACHE_SMQ=m
CONFIG_DM_CACHE_CLEANER=m
CONFIG_DM_ERA=m
CONFIG_DM_MIRROR=m
CONFIG_DM_LOG_USERSPACE=m
CONFIG_DM_RAID=m
CONFIG_DM_ZERO=m
CONFIG_DM_MULTIPATH=m
CONFIG_DM_MULTIPATH_QL=m
CONFIG_DM_MULTIPATH_ST=m
CONFIG_DM_DELAY=m
CONFIG_DM_UEVENT=y
CONFIG_DM_FLAKEY=m
CONFIG_DM_VERITY=m
CONFIG_DM_SWITCH=m
# CONFIG_DM_LOG_WRITES is not set
CONFIG_TARGET_CORE=m
CONFIG_TCM_IBLOCK=m
CONFIG_TCM_FILEIO=m
CONFIG_TCM_PSCSI=m
# CONFIG_TCM_USER2 is not set
CONFIG_LOOPBACK_TARGET=m
CONFIG_TCM_FC=m
CONFIG_ISCSI_TARGET=m
# CONFIG_SBP_TARGET is not set
CONFIG_FUSION=y
CONFIG_FUSION_SPI=m
# CONFIG_FUSION_FC is not set
CONFIG_FUSION_SAS=m
CONFIG_FUSION_MAX_SGE=128
CONFIG_FUSION_CTL=m
CONFIG_FUSION_LOGGING=y
#
# IEEE 1394 (FireWire) support
#
CONFIG_FIREWIRE=m
CONFIG_FIREWIRE_OHCI=m
CONFIG_FIREWIRE_SBP2=m
CONFIG_FIREWIRE_NET=m
# CONFIG_FIREWIRE_NOSY is not set
CONFIG_MACINTOSH_DRIVERS=y
CONFIG_MAC_EMUMOUSEBTN=y
CONFIG_NETDEVICES=y
CONFIG_MII=m
CONFIG_NET_CORE=y
CONFIG_BONDING=m
CONFIG_DUMMY=m
# CONFIG_EQUALIZER is not set
CONFIG_NET_FC=y
CONFIG_IFB=m
CONFIG_NET_TEAM=m
CONFIG_NET_TEAM_MODE_BROADCAST=m
CONFIG_NET_TEAM_MODE_ROUNDROBIN=m
CONFIG_NET_TEAM_MODE_RANDOM=m
CONFIG_NET_TEAM_MODE_ACTIVEBACKUP=m
CONFIG_NET_TEAM_MODE_LOADBALANCE=m
CONFIG_MACVLAN=m
CONFIG_MACVTAP=m
# CONFIG_IPVLAN is not set
CONFIG_VXLAN=m
CONFIG_GENEVE=m
CONFIG_NETCONSOLE=m
CONFIG_NETCONSOLE_DYNAMIC=y
CONFIG_NETPOLL=y
CONFIG_NET_POLL_CONTROLLER=y
CONFIG_TUN=m
# CONFIG_TUN_VNET_CROSS_LE is not set
CONFIG_VETH=m
CONFIG_VIRTIO_NET=m
CONFIG_NLMON=m
# CONFIG_ARCNET is not set
# CONFIG_ATM_DRIVERS is not set
#
# CAIF transport drivers
#
CONFIG_VHOST_NET=m
# CONFIG_VHOST_SCSI is not set
CONFIG_VHOST_RING=m
CONFIG_VHOST=m
# CONFIG_VHOST_CROSS_ENDIAN_LEGACY is not set
#
# Distributed Switch Architecture drivers
#
# CONFIG_NET_DSA_MV88E6XXX is not set
# CONFIG_NET_DSA_MV88E6XXX_NEED_PPU is not set
CONFIG_ETHERNET=y
CONFIG_MDIO=m
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_NET_VENDOR_ADAPTEC is not set
CONFIG_NET_VENDOR_AGERE=y
# CONFIG_ET131X is not set
# CONFIG_NET_VENDOR_ALTEON is not set
# CONFIG_ALTERA_TSE is not set
# CONFIG_NET_VENDOR_AMD is not set
CONFIG_NET_VENDOR_ARC=y
CONFIG_NET_VENDOR_ATHEROS=y
CONFIG_ATL2=m
CONFIG_ATL1=m
CONFIG_ATL1E=m
CONFIG_ATL1C=m
CONFIG_ALX=m
# CONFIG_NET_VENDOR_AURORA is not set
CONFIG_NET_CADENCE=y
CONFIG_MACB=m
CONFIG_NET_VENDOR_BROADCOM=y
CONFIG_B44=m
CONFIG_B44_PCI_AUTOSELECT=y
CONFIG_B44_PCICORE_AUTOSELECT=y
CONFIG_B44_PCI=y
# CONFIG_BCMGENET is not set
CONFIG_BNX2=m
CONFIG_CNIC=m
CONFIG_TIGON3=m
CONFIG_BNX2X=m
CONFIG_BNX2X_SRIOV=y
# CONFIG_BNX2X_VXLAN is not set
# CONFIG_BNXT is not set
CONFIG_NET_VENDOR_BROCADE=y
CONFIG_BNA=m
CONFIG_NET_VENDOR_CAVIUM=y
# CONFIG_THUNDER_NIC_PF is not set
# CONFIG_THUNDER_NIC_VF is not set
# CONFIG_THUNDER_NIC_BGX is not set
# CONFIG_LIQUIDIO is not set
CONFIG_NET_VENDOR_CHELSIO=y
# CONFIG_CHELSIO_T1 is not set
CONFIG_CHELSIO_T3=m
CONFIG_CHELSIO_T4=m
# CONFIG_CHELSIO_T4_DCB is not set
CONFIG_CHELSIO_T4VF=m
CONFIG_NET_VENDOR_CISCO=y
CONFIG_ENIC=m
# CONFIG_CX_ECAT is not set
CONFIG_DNET=m
CONFIG_NET_VENDOR_DEC=y
CONFIG_NET_TULIP=y
CONFIG_DE2104X=m
CONFIG_DE2104X_DSL=0
CONFIG_TULIP=m
# CONFIG_TULIP_MWI is not set
CONFIG_TULIP_MMIO=y
# CONFIG_TULIP_NAPI is not set
CONFIG_DE4X5=m
CONFIG_WINBOND_840=m
CONFIG_DM9102=m
CONFIG_ULI526X=m
CONFIG_PCMCIA_XIRCOM=m
# CONFIG_NET_VENDOR_DLINK is not set
CONFIG_NET_VENDOR_EMULEX=y
CONFIG_BE2NET=m
CONFIG_BE2NET_HWMON=y
CONFIG_BE2NET_VXLAN=y
CONFIG_NET_VENDOR_EZCHIP=y
# CONFIG_NET_VENDOR_EXAR is not set
# CONFIG_NET_VENDOR_HP is not set
CONFIG_NET_VENDOR_INTEL=y
# CONFIG_E100 is not set
CONFIG_E1000=m
CONFIG_E1000E=m
CONFIG_IGB=m
CONFIG_IGB_HWMON=y
CONFIG_IGB_DCA=y
CONFIG_IGBVF=m
# CONFIG_IXGB is not set
CONFIG_IXGBE=m
# CONFIG_IXGBE_VXLAN is not set
CONFIG_IXGBE_HWMON=y
CONFIG_IXGBE_DCA=y
CONFIG_IXGBE_DCB=y
CONFIG_IXGBEVF=m
CONFIG_I40E=m
CONFIG_I40E_VXLAN=y
CONFIG_I40E_DCB=y
# CONFIG_I40E_FCOE is not set
CONFIG_I40EVF=m
CONFIG_FM10K=m
CONFIG_FM10K_VXLAN=y
# CONFIG_NET_VENDOR_I825XX is not set
CONFIG_JME=m
CONFIG_NET_VENDOR_MARVELL=y
CONFIG_MVMDIO=m
CONFIG_SKGE=m
# CONFIG_SKGE_DEBUG is not set
CONFIG_SKGE_GENESIS=y
CONFIG_SKY2=m
# CONFIG_SKY2_DEBUG is not set
CONFIG_NET_VENDOR_MELLANOX=y
CONFIG_MLX4_EN=m
CONFIG_MLX4_EN_DCB=y
CONFIG_MLX4_EN_VXLAN=y
CONFIG_MLX4_CORE=m
CONFIG_MLX4_DEBUG=y
CONFIG_MLX5_CORE=m
CONFIG_MLX5_CORE_EN=y
# CONFIG_MLXSW_CORE is not set
# CONFIG_NET_VENDOR_MICREL is not set
CONFIG_NET_VENDOR_MYRI=y
CONFIG_MYRI10GE=m
CONFIG_MYRI10GE_DCA=y
# CONFIG_FEALNX is not set
# CONFIG_NET_VENDOR_NATSEMI is not set
# CONFIG_NET_VENDOR_NVIDIA is not set
CONFIG_NET_VENDOR_OKI=y
CONFIG_ETHOC=m
CONFIG_NET_PACKET_ENGINE=y
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
CONFIG_NET_VENDOR_QLOGIC=y
CONFIG_QLA3XXX=m
CONFIG_QLCNIC=m
CONFIG_QLCNIC_SRIOV=y
CONFIG_QLCNIC_DCB=y
# CONFIG_QLCNIC_VXLAN is not set
CONFIG_QLCNIC_HWMON=y
CONFIG_QLGE=m
CONFIG_NETXEN_NIC=m
# CONFIG_QED is not set
CONFIG_NET_VENDOR_QUALCOMM=y
CONFIG_NET_VENDOR_REALTEK=y
# CONFIG_ATP is not set
CONFIG_8139CP=m
CONFIG_8139TOO=m
# CONFIG_8139TOO_PIO is not set
# CONFIG_8139TOO_TUNE_TWISTER is not set
CONFIG_8139TOO_8129=y
# CONFIG_8139_OLD_RX_RESET is not set
CONFIG_R8169=m
CONFIG_NET_VENDOR_RENESAS=y
# CONFIG_NET_VENDOR_RDC is not set
CONFIG_NET_VENDOR_ROCKER=y
CONFIG_NET_VENDOR_SAMSUNG=y
# CONFIG_SXGBE_ETH is not set
# CONFIG_NET_VENDOR_SEEQ is not set
# CONFIG_NET_VENDOR_SILAN is not set
# CONFIG_NET_VENDOR_SIS is not set
CONFIG_SFC=m
CONFIG_SFC_MTD=y
CONFIG_SFC_MCDI_MON=y
CONFIG_SFC_SRIOV=y
CONFIG_SFC_MCDI_LOGGING=y
CONFIG_NET_VENDOR_SMSC=y
CONFIG_EPIC100=m
# CONFIG_SMSC911X is not set
CONFIG_SMSC9420=m
# CONFIG_NET_VENDOR_STMICRO is not set
# CONFIG_NET_VENDOR_SUN is not set
CONFIG_NET_VENDOR_SYNOPSYS=y
# CONFIG_NET_VENDOR_TEHUTI is not set
CONFIG_NET_VENDOR_TI=y
# CONFIG_TI_CPSW_ALE is not set
CONFIG_TLAN=m
# CONFIG_NET_VENDOR_VIA is not set
# CONFIG_NET_VENDOR_WIZNET is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_NET_SB1000 is not set
CONFIG_PHYLIB=y
#
# MII PHY device drivers
#
# CONFIG_AQUANTIA_PHY is not set
CONFIG_AT803X_PHY=m
CONFIG_AMD_PHY=m
CONFIG_MARVELL_PHY=m
CONFIG_DAVICOM_PHY=m
CONFIG_QSEMI_PHY=m
CONFIG_LXT_PHY=m
CONFIG_CICADA_PHY=m
CONFIG_VITESSE_PHY=m
# CONFIG_TERANETICS_PHY is not set
CONFIG_SMSC_PHY=m
CONFIG_BCM_NET_PHYLIB=m
CONFIG_BROADCOM_PHY=m
# CONFIG_BCM7XXX_PHY is not set
CONFIG_BCM87XX_PHY=m
CONFIG_ICPLUS_PHY=m
CONFIG_REALTEK_PHY=m
CONFIG_NATIONAL_PHY=m
CONFIG_STE10XP=m
CONFIG_LSI_ET1011C_PHY=m
CONFIG_MICREL_PHY=m
# CONFIG_DP83848_PHY is not set
# CONFIG_DP83867_PHY is not set
# CONFIG_MICROCHIP_PHY is not set
CONFIG_FIXED_PHY=y
CONFIG_MDIO_BITBANG=m
# CONFIG_MDIO_OCTEON is not set
# CONFIG_MDIO_BCM_UNIMAC is not set
# CONFIG_PLIP is not set
CONFIG_PPP=m
CONFIG_PPP_BSDCOMP=m
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_FILTER=y
CONFIG_PPP_MPPE=m
CONFIG_PPP_MULTILINK=y
CONFIG_PPPOATM=m
CONFIG_PPPOE=m
CONFIG_PPTP=m
CONFIG_PPPOL2TP=m
CONFIG_PPP_ASYNC=m
CONFIG_PPP_SYNC_TTY=m
CONFIG_SLIP=m
CONFIG_SLHC=m
CONFIG_SLIP_COMPRESSED=y
CONFIG_SLIP_SMART=y
# CONFIG_SLIP_MODE_SLIP6 is not set
CONFIG_USB_NET_DRIVERS=y
CONFIG_USB_CATC=m
CONFIG_USB_KAWETH=m
CONFIG_USB_PEGASUS=m
CONFIG_USB_RTL8150=m
CONFIG_USB_RTL8152=m
# CONFIG_USB_LAN78XX is not set
CONFIG_USB_USBNET=m
CONFIG_USB_NET_AX8817X=m
CONFIG_USB_NET_AX88179_178A=m
CONFIG_USB_NET_CDCETHER=m
CONFIG_USB_NET_CDC_EEM=m
CONFIG_USB_NET_CDC_NCM=m
CONFIG_USB_NET_HUAWEI_CDC_NCM=m
CONFIG_USB_NET_CDC_MBIM=m
CONFIG_USB_NET_DM9601=m
# CONFIG_USB_NET_SR9700 is not set
# CONFIG_USB_NET_SR9800 is not set
CONFIG_USB_NET_SMSC75XX=m
CONFIG_USB_NET_SMSC95XX=m
CONFIG_USB_NET_GL620A=m
CONFIG_USB_NET_NET1080=m
CONFIG_USB_NET_PLUSB=m
CONFIG_USB_NET_MCS7830=m
CONFIG_USB_NET_RNDIS_HOST=m
CONFIG_USB_NET_CDC_SUBSET=m
CONFIG_USB_ALI_M5632=y
CONFIG_USB_AN2720=y
CONFIG_USB_BELKIN=y
CONFIG_USB_ARMLINUX=y
CONFIG_USB_EPSON2888=y
CONFIG_USB_KC2190=y
CONFIG_USB_NET_ZAURUS=m
CONFIG_USB_NET_CX82310_ETH=m
CONFIG_USB_NET_KALMIA=m
CONFIG_USB_NET_QMI_WWAN=m
CONFIG_USB_HSO=m
CONFIG_USB_NET_INT51X1=m
CONFIG_USB_IPHETH=m
CONFIG_USB_SIERRA_NET=m
CONFIG_USB_VL600=m
# CONFIG_USB_NET_CH9200 is not set
CONFIG_WLAN=y
# CONFIG_LIBERTAS_THINFIRM is not set
# CONFIG_AIRO is not set
# CONFIG_ATMEL is not set
# CONFIG_AT76C50X_USB is not set
# CONFIG_PRISM54 is not set
# CONFIG_USB_ZD1201 is not set
# CONFIG_USB_NET_RNDIS_WLAN is not set
# CONFIG_ADM8211 is not set
# CONFIG_RTL8180 is not set
CONFIG_RTL8187=m
CONFIG_RTL8187_LEDS=y
# CONFIG_MAC80211_HWSIM is not set
CONFIG_MWL8K=m
CONFIG_ATH_COMMON=m
CONFIG_ATH_CARDS=m
# CONFIG_ATH_DEBUG is not set
# CONFIG_ATH5K is not set
# CONFIG_ATH5K_PCI is not set
CONFIG_ATH9K_HW=m
CONFIG_ATH9K_COMMON=m
CONFIG_ATH9K_BTCOEX_SUPPORT=y
CONFIG_ATH9K=m
CONFIG_ATH9K_PCI=y
CONFIG_ATH9K_AHB=y
CONFIG_ATH9K_DEBUGFS=y
# CONFIG_ATH9K_STATION_STATISTICS is not set
# CONFIG_ATH9K_DYNACK is not set
CONFIG_ATH9K_WOW=y
CONFIG_ATH9K_RFKILL=y
# CONFIG_ATH9K_CHANNEL_CONTEXT is not set
CONFIG_ATH9K_PCOEM=y
CONFIG_ATH9K_HTC=m
# CONFIG_ATH9K_HTC_DEBUGFS is not set
CONFIG_CARL9170=m
CONFIG_CARL9170_LEDS=y
# CONFIG_CARL9170_DEBUGFS is not set
CONFIG_CARL9170_WPC=y
# CONFIG_CARL9170_HWRNG is not set
# CONFIG_ATH6KL is not set
# CONFIG_AR5523 is not set
CONFIG_WIL6210=m
CONFIG_WIL6210_ISR_COR=y
CONFIG_WIL6210_TRACING=y
# CONFIG_ATH10K is not set
# CONFIG_WCN36XX is not set
# CONFIG_B43 is not set
# CONFIG_B43LEGACY is not set
CONFIG_BRCMUTIL=m
CONFIG_BRCMSMAC=m
CONFIG_BRCMFMAC=m
CONFIG_BRCMFMAC_PROTO_BCDC=y
CONFIG_BRCMFMAC_SDIO=y
CONFIG_BRCMFMAC_USB=y
# CONFIG_BRCMFMAC_PCIE is not set
# CONFIG_BRCM_TRACING is not set
# CONFIG_BRCMDBG is not set
# CONFIG_HOSTAP is not set
# CONFIG_IPW2100 is not set
# CONFIG_IPW2200 is not set
CONFIG_IWLWIFI=m
CONFIG_IWLWIFI_LEDS=y
CONFIG_IWLDVM=m
CONFIG_IWLMVM=m
CONFIG_IWLWIFI_OPMODE_MODULAR=y
# CONFIG_IWLWIFI_BCAST_FILTERING is not set
# CONFIG_IWLWIFI_UAPSD is not set
#
# Debugging Options
#
# CONFIG_IWLWIFI_DEBUG is not set
CONFIG_IWLWIFI_DEBUGFS=y
# CONFIG_IWLWIFI_DEVICE_TRACING is not set
CONFIG_IWLEGACY=m
CONFIG_IWL4965=m
CONFIG_IWL3945=m
#
# iwl3945 / iwl4965 Debugging Options
#
CONFIG_IWLEGACY_DEBUG=y
CONFIG_IWLEGACY_DEBUGFS=y
# CONFIG_LIBERTAS is not set
# CONFIG_HERMES is not set
# CONFIG_P54_COMMON is not set
CONFIG_RT2X00=m
# CONFIG_RT2400PCI is not set
# CONFIG_RT2500PCI is not set
CONFIG_RT61PCI=m
CONFIG_RT2800PCI=m
CONFIG_RT2800PCI_RT33XX=y
CONFIG_RT2800PCI_RT35XX=y
CONFIG_RT2800PCI_RT53XX=y
CONFIG_RT2800PCI_RT3290=y
# CONFIG_RT2500USB is not set
CONFIG_RT73USB=m
CONFIG_RT2800USB=m
CONFIG_RT2800USB_RT33XX=y
CONFIG_RT2800USB_RT35XX=y
# CONFIG_RT2800USB_RT3573 is not set
CONFIG_RT2800USB_RT53XX=y
CONFIG_RT2800USB_RT55XX=y
CONFIG_RT2800USB_UNKNOWN=y
CONFIG_RT2800_LIB=m
CONFIG_RT2800_LIB_MMIO=m
CONFIG_RT2X00_LIB_MMIO=m
CONFIG_RT2X00_LIB_PCI=m
CONFIG_RT2X00_LIB_USB=m
CONFIG_RT2X00_LIB=m
CONFIG_RT2X00_LIB_FIRMWARE=y
CONFIG_RT2X00_LIB_CRYPTO=y
CONFIG_RT2X00_LIB_LEDS=y
CONFIG_RT2X00_LIB_DEBUGFS=y
# CONFIG_RT2X00_DEBUG is not set
# CONFIG_WL_MEDIATEK is not set
CONFIG_RTL_CARDS=m
CONFIG_RTL8192CE=m
CONFIG_RTL8192SE=m
CONFIG_RTL8192DE=m
CONFIG_RTL8723AE=m
# CONFIG_RTL8723BE is not set
CONFIG_RTL8188EE=m
# CONFIG_RTL8192EE is not set
# CONFIG_RTL8821AE is not set
CONFIG_RTL8192CU=m
CONFIG_RTLWIFI=m
CONFIG_RTLWIFI_PCI=m
CONFIG_RTLWIFI_USB=m
# CONFIG_RTLWIFI_DEBUG is not set
CONFIG_RTL8192C_COMMON=m
CONFIG_RTL8723_COMMON=m
CONFIG_RTLBTCOEXIST=m
# CONFIG_RTL8XXXU is not set
# CONFIG_WL_TI is not set
# CONFIG_ZD1211RW is not set
CONFIG_MWIFIEX=m
CONFIG_MWIFIEX_SDIO=m
CONFIG_MWIFIEX_PCIE=m
CONFIG_MWIFIEX_USB=m
# CONFIG_CW1200 is not set
# CONFIG_RSI_91X is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
#
CONFIG_WAN=y
# CONFIG_LANMEDIA is not set
CONFIG_HDLC=m
CONFIG_HDLC_RAW=m
# CONFIG_HDLC_RAW_ETH is not set
CONFIG_HDLC_CISCO=m
CONFIG_HDLC_FR=m
CONFIG_HDLC_PPP=m
#
# X.25/LAPB support is disabled
#
# CONFIG_PCI200SYN is not set
# CONFIG_WANXL is not set
# CONFIG_PC300TOO is not set
# CONFIG_FARSYNC is not set
# CONFIG_DSCC4 is not set
CONFIG_DLCI=m
CONFIG_DLCI_MAX=8
# CONFIG_SBNI is not set
CONFIG_IEEE802154_DRIVERS=m
CONFIG_IEEE802154_FAKELB=m
# CONFIG_IEEE802154_ATUSB is not set
CONFIG_XEN_NETDEV_FRONTEND=m
# CONFIG_XEN_NETDEV_BACKEND is not set
CONFIG_VMXNET3=m
# CONFIG_FUJITSU_ES is not set
CONFIG_HYPERV_NET=m
CONFIG_ISDN=y
CONFIG_ISDN_I4L=m
CONFIG_ISDN_PPP=y
CONFIG_ISDN_PPP_VJ=y
CONFIG_ISDN_MPP=y
CONFIG_IPPP_FILTER=y
# CONFIG_ISDN_PPP_BSDCOMP is not set
CONFIG_ISDN_AUDIO=y
CONFIG_ISDN_TTY_FAX=y
#
# ISDN feature submodules
#
CONFIG_ISDN_DIVERSION=m
#
# ISDN4Linux hardware drivers
#
#
# Passive cards
#
CONFIG_ISDN_DRV_HISAX=m
#
# D-channel protocol features
#
CONFIG_HISAX_EURO=y
CONFIG_DE_AOC=y
CONFIG_HISAX_NO_SENDCOMPLETE=y
CONFIG_HISAX_NO_LLC=y
CONFIG_HISAX_NO_KEYPAD=y
CONFIG_HISAX_1TR6=y
CONFIG_HISAX_NI1=y
CONFIG_HISAX_MAX_CARDS=8
#
# HiSax supported cards
#
CONFIG_HISAX_16_3=y
CONFIG_HISAX_TELESPCI=y
CONFIG_HISAX_S0BOX=y
CONFIG_HISAX_FRITZPCI=y
CONFIG_HISAX_AVM_A1_PCMCIA=y
CONFIG_HISAX_ELSA=y
CONFIG_HISAX_DIEHLDIVA=y
CONFIG_HISAX_SEDLBAUER=y
CONFIG_HISAX_NETJET=y
CONFIG_HISAX_NETJET_U=y
CONFIG_HISAX_NICCY=y
CONFIG_HISAX_BKM_A4T=y
CONFIG_HISAX_SCT_QUADRO=y
CONFIG_HISAX_GAZEL=y
CONFIG_HISAX_HFC_PCI=y
CONFIG_HISAX_W6692=y
CONFIG_HISAX_HFC_SX=y
CONFIG_HISAX_ENTERNOW_PCI=y
# CONFIG_HISAX_DEBUG is not set
#
# HiSax PCMCIA card service modules
#
#
# HiSax sub driver modules
#
CONFIG_HISAX_ST5481=m
# CONFIG_HISAX_HFCUSB is not set
CONFIG_HISAX_HFC4S8S=m
CONFIG_HISAX_FRITZ_PCIPNP=m
#
# Active cards
#
CONFIG_ISDN_CAPI=m
# CONFIG_CAPI_TRACE is not set
CONFIG_ISDN_CAPI_CAPI20=m
CONFIG_ISDN_CAPI_MIDDLEWARE=y
CONFIG_ISDN_CAPI_CAPIDRV=m
# CONFIG_ISDN_CAPI_CAPIDRV_VERBOSE is not set
#
# CAPI hardware drivers
#
CONFIG_CAPI_AVM=y
CONFIG_ISDN_DRV_AVMB1_B1PCI=m
CONFIG_ISDN_DRV_AVMB1_B1PCIV4=y
CONFIG_ISDN_DRV_AVMB1_T1PCI=m
CONFIG_ISDN_DRV_AVMB1_C4=m
# CONFIG_CAPI_EICON is not set
CONFIG_ISDN_DRV_GIGASET=m
CONFIG_GIGASET_CAPI=y
# CONFIG_GIGASET_I4L is not set
# CONFIG_GIGASET_DUMMYLL is not set
CONFIG_GIGASET_BASE=m
CONFIG_GIGASET_M105=m
CONFIG_GIGASET_M101=m
# CONFIG_GIGASET_DEBUG is not set
CONFIG_HYSDN=m
CONFIG_HYSDN_CAPI=y
CONFIG_MISDN=m
CONFIG_MISDN_DSP=m
CONFIG_MISDN_L1OIP=m
#
# mISDN hardware drivers
#
CONFIG_MISDN_HFCPCI=m
CONFIG_MISDN_HFCMULTI=m
CONFIG_MISDN_HFCUSB=m
CONFIG_MISDN_AVMFRITZ=m
CONFIG_MISDN_SPEEDFAX=m
CONFIG_MISDN_INFINEON=m
CONFIG_MISDN_W6692=m
CONFIG_MISDN_NETJET=m
CONFIG_MISDN_IPAC=m
CONFIG_MISDN_ISAR=m
CONFIG_ISDN_HDLC=m
# CONFIG_NVM is not set
#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_LEDS=y
CONFIG_INPUT_FF_MEMLESS=m
CONFIG_INPUT_POLLDEV=m
CONFIG_INPUT_SPARSEKMAP=m
# CONFIG_INPUT_MATRIXKMAP is not set
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_ADP5588 is not set
# CONFIG_KEYBOARD_ADP5589 is not set
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_QT1070 is not set
# CONFIG_KEYBOARD_QT2160 is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_TCA6416 is not set
# CONFIG_KEYBOARD_TCA8418 is not set
# CONFIG_KEYBOARD_LM8323 is not set
# CONFIG_KEYBOARD_LM8333 is not set
# CONFIG_KEYBOARD_MAX7359 is not set
# CONFIG_KEYBOARD_MCS is not set
# CONFIG_KEYBOARD_MPR121 is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_OPENCORES is not set
# CONFIG_KEYBOARD_SAMSUNG is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_CYPRESS=y
CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
CONFIG_MOUSE_PS2_ELANTECH=y
CONFIG_MOUSE_PS2_SENTELIC=y
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
CONFIG_MOUSE_PS2_FOCALTECH=y
# CONFIG_MOUSE_PS2_VMMOUSE is not set
CONFIG_MOUSE_SERIAL=m
CONFIG_MOUSE_APPLETOUCH=m
CONFIG_MOUSE_BCM5974=m
CONFIG_MOUSE_CYAPA=m
# CONFIG_MOUSE_ELAN_I2C is not set
CONFIG_MOUSE_VSXXXAA=m
CONFIG_MOUSE_SYNAPTICS_I2C=m
CONFIG_MOUSE_SYNAPTICS_USB=m
# CONFIG_INPUT_JOYSTICK is not set
CONFIG_INPUT_TABLET=y
CONFIG_TABLET_USB_ACECAD=m
CONFIG_TABLET_USB_AIPTEK=m
CONFIG_TABLET_USB_GTCO=m
# CONFIG_TABLET_USB_HANWANG is not set
CONFIG_TABLET_USB_KBTAB=m
# CONFIG_TABLET_SERIAL_WACOM4 is not set
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_TOUCHSCREEN_PROPERTIES=y
# CONFIG_TOUCHSCREEN_AD7879 is not set
# CONFIG_TOUCHSCREEN_ATMEL_MXT is not set
# CONFIG_TOUCHSCREEN_BU21013 is not set
# CONFIG_TOUCHSCREEN_CYTTSP_CORE is not set
# CONFIG_TOUCHSCREEN_CYTTSP4_CORE is not set
# CONFIG_TOUCHSCREEN_DYNAPRO is not set
# CONFIG_TOUCHSCREEN_HAMPSHIRE is not set
# CONFIG_TOUCHSCREEN_EETI is not set
# CONFIG_TOUCHSCREEN_FUJITSU is not set
# CONFIG_TOUCHSCREEN_GOODIX is not set
# CONFIG_TOUCHSCREEN_ILI210X is not set
# CONFIG_TOUCHSCREEN_GUNZE is not set
# CONFIG_TOUCHSCREEN_ELAN is not set
CONFIG_TOUCHSCREEN_ELO=m
CONFIG_TOUCHSCREEN_WACOM_W8001=m
CONFIG_TOUCHSCREEN_WACOM_I2C=m
# CONFIG_TOUCHSCREEN_MAX11801 is not set
# CONFIG_TOUCHSCREEN_MCS5000 is not set
# CONFIG_TOUCHSCREEN_MMS114 is not set
# CONFIG_TOUCHSCREEN_MTOUCH is not set
# CONFIG_TOUCHSCREEN_INEXIO is not set
# CONFIG_TOUCHSCREEN_MK712 is not set
# CONFIG_TOUCHSCREEN_PENMOUNT is not set
# CONFIG_TOUCHSCREEN_EDT_FT5X06 is not set
# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
# CONFIG_TOUCHSCREEN_PIXCIR is not set
# CONFIG_TOUCHSCREEN_WDT87XX_I2C is not set
# CONFIG_TOUCHSCREEN_WM97XX is not set
# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
# CONFIG_TOUCHSCREEN_TSC_SERIO is not set
# CONFIG_TOUCHSCREEN_TSC2004 is not set
# CONFIG_TOUCHSCREEN_TSC2007 is not set
# CONFIG_TOUCHSCREEN_ST1232 is not set
# CONFIG_TOUCHSCREEN_SUR40 is not set
# CONFIG_TOUCHSCREEN_SX8654 is not set
# CONFIG_TOUCHSCREEN_TPS6507X is not set
# CONFIG_TOUCHSCREEN_ROHM_BU21023 is not set
CONFIG_INPUT_MISC=y
# CONFIG_INPUT_AD714X is not set
# CONFIG_INPUT_BMA150 is not set
# CONFIG_INPUT_E3X0_BUTTON is not set
CONFIG_INPUT_PCSPKR=m
# CONFIG_INPUT_MMA8450 is not set
# CONFIG_INPUT_MPU3050 is not set
CONFIG_INPUT_APANEL=m
CONFIG_INPUT_ATLAS_BTNS=m
CONFIG_INPUT_ATI_REMOTE2=m
CONFIG_INPUT_KEYSPAN_REMOTE=m
# CONFIG_INPUT_KXTJ9 is not set
CONFIG_INPUT_POWERMATE=m
CONFIG_INPUT_YEALINK=m
CONFIG_INPUT_CM109=m
CONFIG_INPUT_UINPUT=m
# CONFIG_INPUT_PCF8574 is not set
# CONFIG_INPUT_ADXL34X is not set
# CONFIG_INPUT_IMS_PCU is not set
# CONFIG_INPUT_CMA3000 is not set
CONFIG_INPUT_XEN_KBDDEV_FRONTEND=m
# CONFIG_INPUT_IDEAPAD_SLIDEBAR is not set
# CONFIG_INPUT_DRV2665_HAPTICS is not set
# CONFIG_INPUT_DRV2667_HAPTICS is not set
#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=y
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PARKBD is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
CONFIG_SERIO_RAW=m
CONFIG_SERIO_ALTERA_PS2=m
# CONFIG_SERIO_PS2MULT is not set
CONFIG_SERIO_ARC_PS2=m
CONFIG_HYPERV_KEYBOARD=m
# CONFIG_USERIO is not set
# CONFIG_GAMEPORT is not set
#
# Character devices
#
CONFIG_TTY=y
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_VT_CONSOLE_SLEEP=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
CONFIG_UNIX98_PTYS=y
CONFIG_DEVPTS_MULTIPLE_INSTANCES=y
# CONFIG_LEGACY_PTYS is not set
CONFIG_SERIAL_NONSTANDARD=y
# CONFIG_ROCKETPORT is not set
CONFIG_CYCLADES=m
# CONFIG_CYZ_INTR is not set
# CONFIG_MOXA_INTELLIO is not set
# CONFIG_MOXA_SMARTIO is not set
CONFIG_SYNCLINK=m
CONFIG_SYNCLINKMP=m
CONFIG_SYNCLINK_GT=m
CONFIG_NOZOMI=m
# CONFIG_ISI is not set
CONFIG_N_HDLC=m
CONFIG_N_GSM=m
# CONFIG_TRACE_SINK is not set
CONFIG_DEVMEM=y
# CONFIG_DEVKMEM is not set
#
# Serial drivers
#
CONFIG_SERIAL_EARLYCON=y
CONFIG_SERIAL_8250=y
# CONFIG_SERIAL_8250_DEPRECATED_OPTIONS is not set
CONFIG_SERIAL_8250_PNP=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_DMA=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_NR_UARTS=32
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
# CONFIG_SERIAL_8250_DETECT_IRQ is not set
CONFIG_SERIAL_8250_RSA=y
# CONFIG_SERIAL_8250_FSL is not set
# CONFIG_SERIAL_8250_DW is not set
# CONFIG_SERIAL_8250_RT288X is not set
# CONFIG_SERIAL_8250_FINTEK is not set
# CONFIG_SERIAL_8250_MID is not set
#
# Non-8250 serial port support
#
# CONFIG_SERIAL_KGDB_NMI is not set
# CONFIG_SERIAL_UARTLITE is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_CONSOLE_POLL=y
CONFIG_SERIAL_JSM=m
# CONFIG_SERIAL_SCCNXP is not set
# CONFIG_SERIAL_SC16IS7XX is not set
# CONFIG_SERIAL_ALTERA_JTAGUART is not set
# CONFIG_SERIAL_ALTERA_UART is not set
CONFIG_SERIAL_ARC=m
CONFIG_SERIAL_ARC_NR_PORTS=1
# CONFIG_SERIAL_RP2 is not set
# CONFIG_SERIAL_FSL_LPUART is not set
CONFIG_PRINTER=m
# CONFIG_LP_CONSOLE is not set
CONFIG_PPDEV=m
CONFIG_HVC_DRIVER=y
CONFIG_HVC_IRQ=y
CONFIG_HVC_XEN=y
CONFIG_HVC_XEN_FRONTEND=y
CONFIG_VIRTIO_CONSOLE=m
CONFIG_IPMI_HANDLER=m
# CONFIG_IPMI_PANIC_EVENT is not set
CONFIG_IPMI_DEVICE_INTERFACE=m
CONFIG_IPMI_SI=m
# CONFIG_IPMI_SI_PROBE_DEFAULTS is not set
CONFIG_IPMI_SSIF=m
CONFIG_IPMI_WATCHDOG=m
CONFIG_IPMI_POWEROFF=m
CONFIG_HW_RANDOM=y
CONFIG_HW_RANDOM_TIMERIOMEM=m
CONFIG_HW_RANDOM_INTEL=m
CONFIG_HW_RANDOM_AMD=m
CONFIG_HW_RANDOM_VIA=m
CONFIG_HW_RANDOM_VIRTIO=m
CONFIG_HW_RANDOM_TPM=m
CONFIG_NVRAM=y
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_MWAVE is not set
CONFIG_RAW_DRIVER=y
CONFIG_MAX_RAW_DEVS=8192
CONFIG_HPET=y
CONFIG_HPET_MMAP=y
# CONFIG_HPET_MMAP_DEFAULT is not set
CONFIG_HANGCHECK_TIMER=m
CONFIG_UV_MMTIMER=m
CONFIG_TCG_TPM=y
CONFIG_TCG_TIS=y
CONFIG_TCG_TIS_I2C_ATMEL=m
CONFIG_TCG_TIS_I2C_INFINEON=m
CONFIG_TCG_TIS_I2C_NUVOTON=m
CONFIG_TCG_NSC=m
CONFIG_TCG_ATMEL=m
CONFIG_TCG_INFINEON=m
# CONFIG_TCG_XEN is not set
CONFIG_TCG_CRB=m
CONFIG_TELCLOCK=m
CONFIG_DEVPORT=y
# CONFIG_XILLYBUS is not set
#
# I2C support
#
CONFIG_I2C=m
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=m
CONFIG_I2C_MUX=m
#
# Multiplexer I2C Chip support
#
# CONFIG_I2C_MUX_PCA9541 is not set
# CONFIG_I2C_MUX_PINCTRL is not set
# CONFIG_I2C_MUX_REG is not set
CONFIG_I2C_HELPER_AUTO=y
CONFIG_I2C_SMBUS=m
CONFIG_I2C_ALGOBIT=m
CONFIG_I2C_ALGOPCA=m
#
# I2C Hardware Bus support
#
#
# PC SMBus host controller drivers
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
CONFIG_I2C_AMD756=m
CONFIG_I2C_AMD756_S4882=m
CONFIG_I2C_AMD8111=m
CONFIG_I2C_I801=m
CONFIG_I2C_ISCH=m
CONFIG_I2C_ISMT=m
CONFIG_I2C_PIIX4=m
CONFIG_I2C_NFORCE2=m
CONFIG_I2C_NFORCE2_S4985=m
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
CONFIG_I2C_SIS96X=m
CONFIG_I2C_VIA=m
CONFIG_I2C_VIAPRO=m
#
# ACPI drivers
#
CONFIG_I2C_SCMI=m
#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
CONFIG_I2C_DESIGNWARE_CORE=m
CONFIG_I2C_DESIGNWARE_PLATFORM=m
# CONFIG_I2C_DESIGNWARE_PCI is not set
# CONFIG_I2C_EMEV2 is not set
# CONFIG_I2C_OCORES is not set
CONFIG_I2C_PCA_PLATFORM=m
# CONFIG_I2C_PXA_PCI is not set
CONFIG_I2C_SIMTEC=m
# CONFIG_I2C_XILINX is not set
#
# External I2C/SMBus adapter drivers
#
CONFIG_I2C_DIOLAN_U2C=m
CONFIG_I2C_PARPORT=m
CONFIG_I2C_PARPORT_LIGHT=m
# CONFIG_I2C_ROBOTFUZZ_OSIF is not set
# CONFIG_I2C_TAOS_EVM is not set
CONFIG_I2C_TINY_USB=m
CONFIG_I2C_VIPERBOARD=m
#
# Other I2C/SMBus bus drivers
#
CONFIG_I2C_STUB=m
# CONFIG_I2C_SLAVE is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_SPI is not set
# CONFIG_SPMI is not set
# CONFIG_HSI is not set
#
# PPS support
#
CONFIG_PPS=m
# CONFIG_PPS_DEBUG is not set
#
# PPS clients support
#
# CONFIG_PPS_CLIENT_KTIMER is not set
CONFIG_PPS_CLIENT_LDISC=m
CONFIG_PPS_CLIENT_PARPORT=m
CONFIG_PPS_CLIENT_GPIO=m
#
# PPS generators support
#
#
# PTP clock support
#
CONFIG_PTP_1588_CLOCK=m
CONFIG_DP83640_PHY=m
CONFIG_PINCTRL=y
#
# Pin controllers
#
# CONFIG_DEBUG_PINCTRL is not set
# CONFIG_PINCTRL_CHERRYVIEW is not set
# CONFIG_PINCTRL_BROXTON is not set
# CONFIG_PINCTRL_SUNRISEPOINT is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
# CONFIG_PDA_POWER is not set
# CONFIG_TEST_POWER is not set
# CONFIG_BATTERY_DS2780 is not set
# CONFIG_BATTERY_DS2781 is not set
# CONFIG_BATTERY_DS2782 is not set
# CONFIG_BATTERY_SBS is not set
# CONFIG_BATTERY_BQ27XXX is not set
# CONFIG_BATTERY_MAX17040 is not set
# CONFIG_BATTERY_MAX17042 is not set
# CONFIG_CHARGER_MAX8903 is not set
# CONFIG_CHARGER_LP8727 is not set
# CONFIG_CHARGER_BQ2415X is not set
CONFIG_CHARGER_SMB347=m
# CONFIG_BATTERY_GAUGE_LTC2941 is not set
CONFIG_POWER_RESET=y
# CONFIG_POWER_RESET_RESTART is not set
# CONFIG_POWER_AVS is not set
CONFIG_HWMON=y
CONFIG_HWMON_VID=m
# CONFIG_HWMON_DEBUG_CHIP is not set
#
# Native drivers
#
CONFIG_SENSORS_ABITUGURU=m
CONFIG_SENSORS_ABITUGURU3=m
CONFIG_SENSORS_AD7414=m
CONFIG_SENSORS_AD7418=m
CONFIG_SENSORS_ADM1021=m
CONFIG_SENSORS_ADM1025=m
CONFIG_SENSORS_ADM1026=m
CONFIG_SENSORS_ADM1029=m
CONFIG_SENSORS_ADM1031=m
CONFIG_SENSORS_ADM9240=m
CONFIG_SENSORS_ADT7X10=m
CONFIG_SENSORS_ADT7410=m
CONFIG_SENSORS_ADT7411=m
CONFIG_SENSORS_ADT7462=m
CONFIG_SENSORS_ADT7470=m
CONFIG_SENSORS_ADT7475=m
CONFIG_SENSORS_ASC7621=m
CONFIG_SENSORS_K8TEMP=m
CONFIG_SENSORS_K10TEMP=m
CONFIG_SENSORS_FAM15H_POWER=m
CONFIG_SENSORS_APPLESMC=m
CONFIG_SENSORS_ASB100=m
CONFIG_SENSORS_ATXP1=m
CONFIG_SENSORS_DS620=m
CONFIG_SENSORS_DS1621=m
CONFIG_SENSORS_DELL_SMM=m
CONFIG_SENSORS_I5K_AMB=m
CONFIG_SENSORS_F71805F=m
CONFIG_SENSORS_F71882FG=m
CONFIG_SENSORS_F75375S=m
CONFIG_SENSORS_FSCHMD=m
CONFIG_SENSORS_GL518SM=m
CONFIG_SENSORS_GL520SM=m
CONFIG_SENSORS_G760A=m
# CONFIG_SENSORS_G762 is not set
# CONFIG_SENSORS_HIH6130 is not set
CONFIG_SENSORS_IBMAEM=m
CONFIG_SENSORS_IBMPEX=m
# CONFIG_SENSORS_I5500 is not set
CONFIG_SENSORS_CORETEMP=m
CONFIG_SENSORS_IT87=m
# CONFIG_SENSORS_JC42 is not set
# CONFIG_SENSORS_POWR1220 is not set
CONFIG_SENSORS_LINEAGE=m
# CONFIG_SENSORS_LTC2945 is not set
CONFIG_SENSORS_LTC4151=m
CONFIG_SENSORS_LTC4215=m
# CONFIG_SENSORS_LTC4222 is not set
CONFIG_SENSORS_LTC4245=m
# CONFIG_SENSORS_LTC4260 is not set
CONFIG_SENSORS_LTC4261=m
CONFIG_SENSORS_MAX16065=m
CONFIG_SENSORS_MAX1619=m
CONFIG_SENSORS_MAX1668=m
CONFIG_SENSORS_MAX197=m
CONFIG_SENSORS_MAX6639=m
CONFIG_SENSORS_MAX6642=m
CONFIG_SENSORS_MAX6650=m
CONFIG_SENSORS_MAX6697=m
# CONFIG_SENSORS_MAX31790 is not set
# CONFIG_SENSORS_HTU21 is not set
CONFIG_SENSORS_MCP3021=m
CONFIG_SENSORS_LM63=m
CONFIG_SENSORS_LM73=m
CONFIG_SENSORS_LM75=m
CONFIG_SENSORS_LM77=m
CONFIG_SENSORS_LM78=m
CONFIG_SENSORS_LM80=m
CONFIG_SENSORS_LM83=m
CONFIG_SENSORS_LM85=m
CONFIG_SENSORS_LM87=m
CONFIG_SENSORS_LM90=m
CONFIG_SENSORS_LM92=m
CONFIG_SENSORS_LM93=m
CONFIG_SENSORS_LM95234=m
CONFIG_SENSORS_LM95241=m
CONFIG_SENSORS_LM95245=m
CONFIG_SENSORS_PC87360=m
CONFIG_SENSORS_PC87427=m
CONFIG_SENSORS_NTC_THERMISTOR=m
# CONFIG_SENSORS_NCT6683 is not set
CONFIG_SENSORS_NCT6775=m
# CONFIG_SENSORS_NCT7802 is not set
# CONFIG_SENSORS_NCT7904 is not set
CONFIG_SENSORS_PCF8591=m
CONFIG_PMBUS=m
CONFIG_SENSORS_PMBUS=m
CONFIG_SENSORS_ADM1275=m
CONFIG_SENSORS_LM25066=m
CONFIG_SENSORS_LTC2978=m
CONFIG_SENSORS_MAX16064=m
# CONFIG_SENSORS_MAX20751 is not set
CONFIG_SENSORS_MAX34440=m
CONFIG_SENSORS_MAX8688=m
# CONFIG_SENSORS_TPS40422 is not set
CONFIG_SENSORS_UCD9000=m
CONFIG_SENSORS_UCD9200=m
CONFIG_SENSORS_ZL6100=m
CONFIG_SENSORS_SHT21=m
# CONFIG_SENSORS_SHTC1 is not set
CONFIG_SENSORS_SIS5595=m
CONFIG_SENSORS_DME1737=m
CONFIG_SENSORS_EMC1403=m
# CONFIG_SENSORS_EMC2103 is not set
CONFIG_SENSORS_EMC6W201=m
CONFIG_SENSORS_SMSC47M1=m
CONFIG_SENSORS_SMSC47M192=m
CONFIG_SENSORS_SMSC47B397=m
CONFIG_SENSORS_SCH56XX_COMMON=m
CONFIG_SENSORS_SCH5627=m
CONFIG_SENSORS_SCH5636=m
# CONFIG_SENSORS_SMM665 is not set
# CONFIG_SENSORS_ADC128D818 is not set
CONFIG_SENSORS_ADS1015=m
CONFIG_SENSORS_ADS7828=m
CONFIG_SENSORS_AMC6821=m
CONFIG_SENSORS_INA209=m
CONFIG_SENSORS_INA2XX=m
# CONFIG_SENSORS_TC74 is not set
CONFIG_SENSORS_THMC50=m
CONFIG_SENSORS_TMP102=m
# CONFIG_SENSORS_TMP103 is not set
CONFIG_SENSORS_TMP401=m
CONFIG_SENSORS_TMP421=m
CONFIG_SENSORS_VIA_CPUTEMP=m
CONFIG_SENSORS_VIA686A=m
CONFIG_SENSORS_VT1211=m
CONFIG_SENSORS_VT8231=m
CONFIG_SENSORS_W83781D=m
CONFIG_SENSORS_W83791D=m
CONFIG_SENSORS_W83792D=m
CONFIG_SENSORS_W83793=m
CONFIG_SENSORS_W83795=m
# CONFIG_SENSORS_W83795_FANCTRL is not set
CONFIG_SENSORS_W83L785TS=m
CONFIG_SENSORS_W83L786NG=m
CONFIG_SENSORS_W83627HF=m
CONFIG_SENSORS_W83627EHF=m
#
# ACPI drivers
#
CONFIG_SENSORS_ACPI_POWER=m
CONFIG_SENSORS_ATK0110=m
CONFIG_THERMAL=y
CONFIG_THERMAL_HWMON=y
CONFIG_THERMAL_WRITABLE_TRIPS=y
CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
# CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE is not set
# CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE is not set
# CONFIG_THERMAL_DEFAULT_GOV_POWER_ALLOCATOR is not set
CONFIG_THERMAL_GOV_FAIR_SHARE=y
CONFIG_THERMAL_GOV_STEP_WISE=y
CONFIG_THERMAL_GOV_BANG_BANG=y
CONFIG_THERMAL_GOV_USER_SPACE=y
# CONFIG_THERMAL_GOV_POWER_ALLOCATOR is not set
# CONFIG_THERMAL_EMULATION is not set
CONFIG_INTEL_POWERCLAMP=m
CONFIG_X86_PKG_TEMP_THERMAL=m
# CONFIG_INTEL_SOC_DTS_THERMAL is not set
# CONFIG_INT340X_THERMAL is not set
# CONFIG_INTEL_PCH_THERMAL is not set
CONFIG_WATCHDOG=y
CONFIG_WATCHDOG_CORE=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
#
# Watchdog Device Drivers
#
CONFIG_SOFT_WATCHDOG=m
# CONFIG_XILINX_WATCHDOG is not set
# CONFIG_CADENCE_WATCHDOG is not set
# CONFIG_DW_WATCHDOG is not set
# CONFIG_MAX63XX_WATCHDOG is not set
# CONFIG_ACQUIRE_WDT is not set
# CONFIG_ADVANTECH_WDT is not set
CONFIG_ALIM1535_WDT=m
CONFIG_ALIM7101_WDT=m
CONFIG_F71808E_WDT=m
CONFIG_SP5100_TCO=m
CONFIG_SBC_FITPC2_WATCHDOG=m
# CONFIG_EUROTECH_WDT is not set
CONFIG_IB700_WDT=m
CONFIG_IBMASR=m
# CONFIG_WAFER_WDT is not set
CONFIG_I6300ESB_WDT=m
CONFIG_IE6XX_WDT=m
CONFIG_ITCO_WDT=m
CONFIG_ITCO_VENDOR_SUPPORT=y
CONFIG_IT8712F_WDT=m
CONFIG_IT87_WDT=m
CONFIG_HP_WATCHDOG=m
CONFIG_HPWDT_NMI_DECODING=y
# CONFIG_SC1200_WDT is not set
# CONFIG_PC87413_WDT is not set
CONFIG_NV_TCO=m
# CONFIG_60XX_WDT is not set
# CONFIG_CPU5_WDT is not set
CONFIG_SMSC_SCH311X_WDT=m
# CONFIG_SMSC37B787_WDT is not set
CONFIG_VIA_WDT=m
CONFIG_W83627HF_WDT=m
CONFIG_W83877F_WDT=m
CONFIG_W83977F_WDT=m
CONFIG_MACHZ_WDT=m
# CONFIG_SBC_EPX_C3_WATCHDOG is not set
# CONFIG_BCM7038_WDT is not set
CONFIG_XEN_WDT=m
#
# PCI-based Watchdog Cards
#
CONFIG_PCIPCWATCHDOG=m
CONFIG_WDTPCI=m
#
# USB-based Watchdog Cards
#
CONFIG_USBPCWATCHDOG=m
CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
CONFIG_SSB=m
CONFIG_SSB_SPROM=y
CONFIG_SSB_PCIHOST_POSSIBLE=y
CONFIG_SSB_PCIHOST=y
# CONFIG_SSB_B43_PCI_BRIDGE is not set
CONFIG_SSB_SDIOHOST_POSSIBLE=y
CONFIG_SSB_SDIOHOST=y
# CONFIG_SSB_HOST_SOC is not set
# CONFIG_SSB_DEBUG is not set
CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
CONFIG_SSB_DRIVER_PCICORE=y
CONFIG_BCMA_POSSIBLE=y
#
# Broadcom specific AMBA
#
CONFIG_BCMA=m
CONFIG_BCMA_HOST_PCI_POSSIBLE=y
CONFIG_BCMA_HOST_PCI=y
# CONFIG_BCMA_HOST_SOC is not set
CONFIG_BCMA_DRIVER_PCI=y
CONFIG_BCMA_DRIVER_GMAC_CMN=y
# CONFIG_BCMA_DEBUG is not set
#
# Multifunction device drivers
#
CONFIG_MFD_CORE=m
# CONFIG_MFD_BCM590XX is not set
# CONFIG_MFD_CROS_EC is not set
# CONFIG_MFD_DLN2 is not set
# CONFIG_MFD_MC13XXX_I2C is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_INTEL_QUARK_I2C_GPIO is not set
CONFIG_LPC_ICH=m
CONFIG_LPC_SCH=m
# CONFIG_MFD_INTEL_LPSS_ACPI is not set
# CONFIG_MFD_INTEL_LPSS_PCI is not set
# CONFIG_MFD_JANZ_CMODIO is not set
# CONFIG_MFD_KEMPLD is not set
# CONFIG_MFD_MT6397 is not set
# CONFIG_MFD_MENF21BMC is not set
CONFIG_MFD_VIPERBOARD=m
# CONFIG_MFD_RETU is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_MFD_RDC321X is not set
CONFIG_MFD_RTSX_PCI=m
# CONFIG_MFD_RTSX_USB is not set
# CONFIG_MFD_RN5T618 is not set
# CONFIG_MFD_SI476X_CORE is not set
CONFIG_MFD_SM501=m
# CONFIG_MFD_SKY81452 is not set
# CONFIG_ABX500_CORE is not set
# CONFIG_MFD_SYSCON is not set
# CONFIG_MFD_TI_AM335X_TSCADC is not set
# CONFIG_MFD_LP3943 is not set
# CONFIG_TPS6105X is not set
# CONFIG_TPS6507X is not set
# CONFIG_MFD_TPS65217 is not set
# CONFIG_MFD_TPS65218 is not set
# CONFIG_MFD_WL1273_CORE is not set
# CONFIG_MFD_LM3533 is not set
# CONFIG_MFD_TMIO is not set
CONFIG_MFD_VX855=m
# CONFIG_MFD_ARIZONA_I2C is not set
# CONFIG_MFD_WM8994 is not set
# CONFIG_REGULATOR is not set
CONFIG_MEDIA_SUPPORT=m
#
# Multimedia core support
#
CONFIG_MEDIA_CAMERA_SUPPORT=y
CONFIG_MEDIA_ANALOG_TV_SUPPORT=y
CONFIG_MEDIA_DIGITAL_TV_SUPPORT=y
CONFIG_MEDIA_RADIO_SUPPORT=y
# CONFIG_MEDIA_SDR_SUPPORT is not set
CONFIG_MEDIA_RC_SUPPORT=y
# CONFIG_MEDIA_CONTROLLER is not set
CONFIG_VIDEO_DEV=m
CONFIG_VIDEO_V4L2=m
# CONFIG_VIDEO_ADV_DEBUG is not set
# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
CONFIG_VIDEO_TUNER=m
CONFIG_VIDEOBUF_GEN=m
CONFIG_VIDEOBUF_DMA_SG=m
CONFIG_VIDEOBUF_VMALLOC=m
CONFIG_VIDEOBUF_DVB=m
CONFIG_VIDEOBUF2_CORE=m
CONFIG_VIDEOBUF2_MEMOPS=m
CONFIG_VIDEOBUF2_VMALLOC=m
CONFIG_VIDEOBUF2_DMA_SG=m
CONFIG_VIDEOBUF2_DVB=m
CONFIG_DVB_CORE=m
CONFIG_DVB_NET=y
CONFIG_TTPCI_EEPROM=m
CONFIG_DVB_MAX_ADAPTERS=8
CONFIG_DVB_DYNAMIC_MINORS=y
#
# Media drivers
#
CONFIG_RC_CORE=m
CONFIG_RC_MAP=m
CONFIG_RC_DECODERS=y
CONFIG_LIRC=m
CONFIG_IR_LIRC_CODEC=m
CONFIG_IR_NEC_DECODER=m
CONFIG_IR_RC5_DECODER=m
CONFIG_IR_RC6_DECODER=m
CONFIG_IR_JVC_DECODER=m
CONFIG_IR_SONY_DECODER=m
CONFIG_IR_SANYO_DECODER=m
CONFIG_IR_SHARP_DECODER=m
CONFIG_IR_MCE_KBD_DECODER=m
CONFIG_IR_XMP_DECODER=m
CONFIG_RC_DEVICES=y
CONFIG_RC_ATI_REMOTE=m
CONFIG_IR_ENE=m
# CONFIG_IR_HIX5HD2 is not set
CONFIG_IR_IMON=m
CONFIG_IR_MCEUSB=m
CONFIG_IR_ITE_CIR=m
CONFIG_IR_FINTEK=m
CONFIG_IR_NUVOTON=m
CONFIG_IR_REDRAT3=m
CONFIG_IR_STREAMZAP=m
CONFIG_IR_WINBOND_CIR=m
# CONFIG_IR_IGORPLUGUSB is not set
CONFIG_IR_IGUANA=m
CONFIG_IR_TTUSBIR=m
# CONFIG_RC_LOOPBACK is not set
CONFIG_IR_GPIO_CIR=m
CONFIG_MEDIA_USB_SUPPORT=y
#
# Webcam devices
#
CONFIG_USB_VIDEO_CLASS=m
CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y
CONFIG_USB_GSPCA=m
CONFIG_USB_M5602=m
CONFIG_USB_STV06XX=m
CONFIG_USB_GL860=m
CONFIG_USB_GSPCA_BENQ=m
CONFIG_USB_GSPCA_CONEX=m
CONFIG_USB_GSPCA_CPIA1=m
# CONFIG_USB_GSPCA_DTCS033 is not set
CONFIG_USB_GSPCA_ETOMS=m
CONFIG_USB_GSPCA_FINEPIX=m
CONFIG_USB_GSPCA_JEILINJ=m
CONFIG_USB_GSPCA_JL2005BCD=m
# CONFIG_USB_GSPCA_KINECT is not set
CONFIG_USB_GSPCA_KONICA=m
CONFIG_USB_GSPCA_MARS=m
CONFIG_USB_GSPCA_MR97310A=m
CONFIG_USB_GSPCA_NW80X=m
CONFIG_USB_GSPCA_OV519=m
CONFIG_USB_GSPCA_OV534=m
CONFIG_USB_GSPCA_OV534_9=m
CONFIG_USB_GSPCA_PAC207=m
CONFIG_USB_GSPCA_PAC7302=m
CONFIG_USB_GSPCA_PAC7311=m
CONFIG_USB_GSPCA_SE401=m
CONFIG_USB_GSPCA_SN9C2028=m
CONFIG_USB_GSPCA_SN9C20X=m
CONFIG_USB_GSPCA_SONIXB=m
CONFIG_USB_GSPCA_SONIXJ=m
CONFIG_USB_GSPCA_SPCA500=m
CONFIG_USB_GSPCA_SPCA501=m
CONFIG_USB_GSPCA_SPCA505=m
CONFIG_USB_GSPCA_SPCA506=m
CONFIG_USB_GSPCA_SPCA508=m
CONFIG_USB_GSPCA_SPCA561=m
CONFIG_USB_GSPCA_SPCA1528=m
CONFIG_USB_GSPCA_SQ905=m
CONFIG_USB_GSPCA_SQ905C=m
CONFIG_USB_GSPCA_SQ930X=m
CONFIG_USB_GSPCA_STK014=m
# CONFIG_USB_GSPCA_STK1135 is not set
CONFIG_USB_GSPCA_STV0680=m
CONFIG_USB_GSPCA_SUNPLUS=m
CONFIG_USB_GSPCA_T613=m
CONFIG_USB_GSPCA_TOPRO=m
# CONFIG_USB_GSPCA_TOUPTEK is not set
CONFIG_USB_GSPCA_TV8532=m
CONFIG_USB_GSPCA_VC032X=m
CONFIG_USB_GSPCA_VICAM=m
CONFIG_USB_GSPCA_XIRLINK_CIT=m
CONFIG_USB_GSPCA_ZC3XX=m
CONFIG_USB_PWC=m
# CONFIG_USB_PWC_DEBUG is not set
CONFIG_USB_PWC_INPUT_EVDEV=y
# CONFIG_VIDEO_CPIA2 is not set
CONFIG_USB_ZR364XX=m
CONFIG_USB_STKWEBCAM=m
CONFIG_USB_S2255=m
# CONFIG_VIDEO_USBTV is not set
#
# Analog TV USB devices
#
CONFIG_VIDEO_PVRUSB2=m
CONFIG_VIDEO_PVRUSB2_SYSFS=y
CONFIG_VIDEO_PVRUSB2_DVB=y
# CONFIG_VIDEO_PVRUSB2_DEBUGIFC is not set
CONFIG_VIDEO_HDPVR=m
CONFIG_VIDEO_USBVISION=m
# CONFIG_VIDEO_STK1160_COMMON is not set
# CONFIG_VIDEO_GO7007 is not set
#
# Analog/digital TV USB devices
#
CONFIG_VIDEO_AU0828=m
CONFIG_VIDEO_AU0828_V4L2=y
# CONFIG_VIDEO_AU0828_RC is not set
CONFIG_VIDEO_CX231XX=m
CONFIG_VIDEO_CX231XX_RC=y
CONFIG_VIDEO_CX231XX_ALSA=m
CONFIG_VIDEO_CX231XX_DVB=m
CONFIG_VIDEO_TM6000=m
CONFIG_VIDEO_TM6000_ALSA=m
CONFIG_VIDEO_TM6000_DVB=m
#
# Digital TV USB devices
#
CONFIG_DVB_USB=m
# CONFIG_DVB_USB_DEBUG is not set
CONFIG_DVB_USB_A800=m
CONFIG_DVB_USB_DIBUSB_MB=m
# CONFIG_DVB_USB_DIBUSB_MB_FAULTY is not set
CONFIG_DVB_USB_DIBUSB_MC=m
CONFIG_DVB_USB_DIB0700=m
CONFIG_DVB_USB_UMT_010=m
CONFIG_DVB_USB_CXUSB=m
CONFIG_DVB_USB_M920X=m
CONFIG_DVB_USB_DIGITV=m
CONFIG_DVB_USB_VP7045=m
CONFIG_DVB_USB_VP702X=m
CONFIG_DVB_USB_GP8PSK=m
CONFIG_DVB_USB_NOVA_T_USB2=m
CONFIG_DVB_USB_TTUSB2=m
CONFIG_DVB_USB_DTT200U=m
CONFIG_DVB_USB_OPERA1=m
CONFIG_DVB_USB_AF9005=m
CONFIG_DVB_USB_AF9005_REMOTE=m
CONFIG_DVB_USB_PCTV452E=m
CONFIG_DVB_USB_DW2102=m
CONFIG_DVB_USB_CINERGY_T2=m
CONFIG_DVB_USB_DTV5100=m
CONFIG_DVB_USB_FRIIO=m
CONFIG_DVB_USB_AZ6027=m
CONFIG_DVB_USB_TECHNISAT_USB2=m
CONFIG_DVB_USB_V2=m
CONFIG_DVB_USB_AF9015=m
CONFIG_DVB_USB_AF9035=m
CONFIG_DVB_USB_ANYSEE=m
CONFIG_DVB_USB_AU6610=m
CONFIG_DVB_USB_AZ6007=m
CONFIG_DVB_USB_CE6230=m
CONFIG_DVB_USB_EC168=m
CONFIG_DVB_USB_GL861=m
CONFIG_DVB_USB_LME2510=m
CONFIG_DVB_USB_MXL111SF=m
CONFIG_DVB_USB_RTL28XXU=m
# CONFIG_DVB_USB_DVBSKY is not set
CONFIG_DVB_TTUSB_BUDGET=m
CONFIG_DVB_TTUSB_DEC=m
CONFIG_SMS_USB_DRV=m
CONFIG_DVB_B2C2_FLEXCOP_USB=m
# CONFIG_DVB_B2C2_FLEXCOP_USB_DEBUG is not set
# CONFIG_DVB_AS102 is not set
#
# Webcam, TV (analog/digital) USB devices
#
CONFIG_VIDEO_EM28XX=m
# CONFIG_VIDEO_EM28XX_V4L2 is not set
CONFIG_VIDEO_EM28XX_ALSA=m
CONFIG_VIDEO_EM28XX_DVB=m
CONFIG_VIDEO_EM28XX_RC=m
CONFIG_MEDIA_PCI_SUPPORT=y
#
# Media capture support
#
# CONFIG_VIDEO_MEYE is not set
# CONFIG_VIDEO_SOLO6X10 is not set
# CONFIG_VIDEO_TW68 is not set
# CONFIG_VIDEO_ZORAN is not set
#
# Media capture/analog TV support
#
CONFIG_VIDEO_IVTV=m
# CONFIG_VIDEO_IVTV_ALSA is not set
CONFIG_VIDEO_FB_IVTV=m
# CONFIG_VIDEO_HEXIUM_GEMINI is not set
# CONFIG_VIDEO_HEXIUM_ORION is not set
# CONFIG_VIDEO_MXB is not set
# CONFIG_VIDEO_DT3155 is not set
#
# Media capture/analog/hybrid TV support
#
CONFIG_VIDEO_CX18=m
CONFIG_VIDEO_CX18_ALSA=m
CONFIG_VIDEO_CX23885=m
CONFIG_MEDIA_ALTERA_CI=m
# CONFIG_VIDEO_CX25821 is not set
CONFIG_VIDEO_CX88=m
CONFIG_VIDEO_CX88_ALSA=m
CONFIG_VIDEO_CX88_BLACKBIRD=m
CONFIG_VIDEO_CX88_DVB=m
CONFIG_VIDEO_CX88_ENABLE_VP3054=y
CONFIG_VIDEO_CX88_VP3054=m
CONFIG_VIDEO_CX88_MPEG=m
CONFIG_VIDEO_BT848=m
CONFIG_DVB_BT8XX=m
CONFIG_VIDEO_SAA7134=m
CONFIG_VIDEO_SAA7134_ALSA=m
CONFIG_VIDEO_SAA7134_RC=y
CONFIG_VIDEO_SAA7134_DVB=m
CONFIG_VIDEO_SAA7164=m
#
# Media digital TV PCI Adapters
#
CONFIG_DVB_AV7110_IR=y
CONFIG_DVB_AV7110=m
CONFIG_DVB_AV7110_OSD=y
CONFIG_DVB_BUDGET_CORE=m
CONFIG_DVB_BUDGET=m
CONFIG_DVB_BUDGET_CI=m
CONFIG_DVB_BUDGET_AV=m
CONFIG_DVB_BUDGET_PATCH=m
CONFIG_DVB_B2C2_FLEXCOP_PCI=m
# CONFIG_DVB_B2C2_FLEXCOP_PCI_DEBUG is not set
CONFIG_DVB_PLUTO2=m
CONFIG_DVB_DM1105=m
CONFIG_DVB_PT1=m
# CONFIG_DVB_PT3 is not set
CONFIG_MANTIS_CORE=m
CONFIG_DVB_MANTIS=m
CONFIG_DVB_HOPPER=m
CONFIG_DVB_NGENE=m
CONFIG_DVB_DDBRIDGE=m
# CONFIG_DVB_SMIPCIE is not set
# CONFIG_V4L_PLATFORM_DRIVERS is not set
# CONFIG_V4L_MEM2MEM_DRIVERS is not set
# CONFIG_V4L_TEST_DRIVERS is not set
# CONFIG_DVB_PLATFORM_DRIVERS is not set
#
# Supported MMC/SDIO adapters
#
CONFIG_SMS_SDIO_DRV=m
CONFIG_RADIO_ADAPTERS=y
CONFIG_RADIO_TEA575X=m
# CONFIG_RADIO_SI470X is not set
# CONFIG_RADIO_SI4713 is not set
# CONFIG_USB_MR800 is not set
# CONFIG_USB_DSBR is not set
# CONFIG_RADIO_MAXIRADIO is not set
# CONFIG_RADIO_SHARK is not set
# CONFIG_RADIO_SHARK2 is not set
# CONFIG_USB_KEENE is not set
# CONFIG_USB_RAREMONO is not set
# CONFIG_USB_MA901 is not set
# CONFIG_RADIO_TEA5764 is not set
# CONFIG_RADIO_SAA7706H is not set
# CONFIG_RADIO_TEF6862 is not set
# CONFIG_RADIO_WL1273 is not set
#
# Texas Instruments WL128x FM driver (ST based)
#
#
# Supported FireWire (IEEE 1394) Adapters
#
CONFIG_DVB_FIREDTV=m
CONFIG_DVB_FIREDTV_INPUT=y
CONFIG_MEDIA_COMMON_OPTIONS=y
#
# common driver options
#
CONFIG_VIDEO_CX2341X=m
CONFIG_VIDEO_TVEEPROM=m
CONFIG_CYPRESS_FIRMWARE=m
CONFIG_DVB_B2C2_FLEXCOP=m
CONFIG_VIDEO_SAA7146=m
CONFIG_VIDEO_SAA7146_VV=m
CONFIG_SMS_SIANO_MDTV=m
CONFIG_SMS_SIANO_RC=y
# CONFIG_SMS_SIANO_DEBUGFS is not set
#
# Media ancillary drivers (tuners, sensors, i2c, frontends)
#
CONFIG_MEDIA_SUBDRV_AUTOSELECT=y
CONFIG_MEDIA_ATTACH=y
CONFIG_VIDEO_IR_I2C=m
#
# Audio decoders, processors and mixers
#
CONFIG_VIDEO_TVAUDIO=m
CONFIG_VIDEO_TDA7432=m
CONFIG_VIDEO_MSP3400=m
CONFIG_VIDEO_CS5345=m
CONFIG_VIDEO_CS53L32A=m
CONFIG_VIDEO_WM8775=m
CONFIG_VIDEO_WM8739=m
CONFIG_VIDEO_VP27SMPX=m
#
# RDS decoders
#
CONFIG_VIDEO_SAA6588=m
#
# Video decoders
#
CONFIG_VIDEO_SAA711X=m
#
# Video and audio decoders
#
CONFIG_VIDEO_SAA717X=m
CONFIG_VIDEO_CX25840=m
#
# Video encoders
#
CONFIG_VIDEO_SAA7127=m
#
# Camera sensor devices
#
#
# Flash devices
#
#
# Video improvement chips
#
CONFIG_VIDEO_UPD64031A=m
CONFIG_VIDEO_UPD64083=m
#
# Audio/Video compression chips
#
CONFIG_VIDEO_SAA6752HS=m
#
# Miscellaneous helper chips
#
CONFIG_VIDEO_M52790=m
#
# Sensors used on soc_camera driver
#
CONFIG_MEDIA_TUNER=m
CONFIG_MEDIA_TUNER_SIMPLE=m
CONFIG_MEDIA_TUNER_TDA8290=m
CONFIG_MEDIA_TUNER_TDA827X=m
CONFIG_MEDIA_TUNER_TDA18271=m
CONFIG_MEDIA_TUNER_TDA9887=m
CONFIG_MEDIA_TUNER_TEA5761=m
CONFIG_MEDIA_TUNER_TEA5767=m
CONFIG_MEDIA_TUNER_MT20XX=m
CONFIG_MEDIA_TUNER_MT2060=m
CONFIG_MEDIA_TUNER_MT2063=m
CONFIG_MEDIA_TUNER_MT2266=m
CONFIG_MEDIA_TUNER_MT2131=m
CONFIG_MEDIA_TUNER_QT1010=m
CONFIG_MEDIA_TUNER_XC2028=m
CONFIG_MEDIA_TUNER_XC5000=m
CONFIG_MEDIA_TUNER_XC4000=m
CONFIG_MEDIA_TUNER_MXL5005S=m
CONFIG_MEDIA_TUNER_MXL5007T=m
CONFIG_MEDIA_TUNER_MC44S803=m
CONFIG_MEDIA_TUNER_MAX2165=m
CONFIG_MEDIA_TUNER_TDA18218=m
CONFIG_MEDIA_TUNER_FC0011=m
CONFIG_MEDIA_TUNER_FC0012=m
CONFIG_MEDIA_TUNER_FC0013=m
CONFIG_MEDIA_TUNER_TDA18212=m
CONFIG_MEDIA_TUNER_E4000=m
CONFIG_MEDIA_TUNER_FC2580=m
CONFIG_MEDIA_TUNER_M88RS6000T=m
CONFIG_MEDIA_TUNER_TUA9001=m
CONFIG_MEDIA_TUNER_SI2157=m
CONFIG_MEDIA_TUNER_IT913X=m
CONFIG_MEDIA_TUNER_R820T=m
#
# Multistandard (satellite) frontends
#
CONFIG_DVB_STB0899=m
CONFIG_DVB_STB6100=m
CONFIG_DVB_STV090x=m
CONFIG_DVB_STV6110x=m
CONFIG_DVB_M88DS3103=m
#
# Multistandard (cable + terrestrial) frontends
#
CONFIG_DVB_DRXK=m
CONFIG_DVB_TDA18271C2DD=m
CONFIG_DVB_SI2165=m
#
# DVB-S (satellite) frontends
#
CONFIG_DVB_CX24110=m
CONFIG_DVB_CX24123=m
CONFIG_DVB_MT312=m
CONFIG_DVB_ZL10036=m
CONFIG_DVB_ZL10039=m
CONFIG_DVB_S5H1420=m
CONFIG_DVB_STV0288=m
CONFIG_DVB_STB6000=m
CONFIG_DVB_STV0299=m
CONFIG_DVB_STV6110=m
CONFIG_DVB_STV0900=m
CONFIG_DVB_TDA8083=m
CONFIG_DVB_TDA10086=m
CONFIG_DVB_TDA8261=m
CONFIG_DVB_VES1X93=m
CONFIG_DVB_TUNER_ITD1000=m
CONFIG_DVB_TUNER_CX24113=m
CONFIG_DVB_TDA826X=m
CONFIG_DVB_TUA6100=m
CONFIG_DVB_CX24116=m
CONFIG_DVB_CX24117=m
CONFIG_DVB_CX24120=m
CONFIG_DVB_SI21XX=m
CONFIG_DVB_TS2020=m
CONFIG_DVB_DS3000=m
CONFIG_DVB_MB86A16=m
CONFIG_DVB_TDA10071=m
#
# DVB-T (terrestrial) frontends
#
CONFIG_DVB_SP8870=m
CONFIG_DVB_SP887X=m
CONFIG_DVB_CX22700=m
CONFIG_DVB_CX22702=m
CONFIG_DVB_DRXD=m
CONFIG_DVB_L64781=m
CONFIG_DVB_TDA1004X=m
CONFIG_DVB_NXT6000=m
CONFIG_DVB_MT352=m
CONFIG_DVB_ZL10353=m
CONFIG_DVB_DIB3000MB=m
CONFIG_DVB_DIB3000MC=m
CONFIG_DVB_DIB7000M=m
CONFIG_DVB_DIB7000P=m
CONFIG_DVB_TDA10048=m
CONFIG_DVB_AF9013=m
CONFIG_DVB_EC100=m
CONFIG_DVB_STV0367=m
CONFIG_DVB_CXD2820R=m
CONFIG_DVB_RTL2830=m
CONFIG_DVB_RTL2832=m
CONFIG_DVB_SI2168=m
# CONFIG_DVB_AS102_FE is not set
#
# DVB-C (cable) frontends
#
CONFIG_DVB_VES1820=m
CONFIG_DVB_TDA10021=m
CONFIG_DVB_TDA10023=m
CONFIG_DVB_STV0297=m
#
# ATSC (North American/Korean Terrestrial/Cable DTV) frontends
#
CONFIG_DVB_NXT200X=m
CONFIG_DVB_OR51211=m
CONFIG_DVB_OR51132=m
CONFIG_DVB_BCM3510=m
CONFIG_DVB_LGDT330X=m
CONFIG_DVB_LGDT3305=m
CONFIG_DVB_LGDT3306A=m
CONFIG_DVB_LG2160=m
CONFIG_DVB_S5H1409=m
CONFIG_DVB_AU8522=m
CONFIG_DVB_AU8522_DTV=m
CONFIG_DVB_AU8522_V4L=m
CONFIG_DVB_S5H1411=m
#
# ISDB-T (terrestrial) frontends
#
CONFIG_DVB_S921=m
CONFIG_DVB_DIB8000=m
CONFIG_DVB_MB86A20S=m
#
# ISDB-S (satellite) & ISDB-T (terrestrial) frontends
#
#
# Digital terrestrial only tuners/PLL
#
CONFIG_DVB_PLL=m
CONFIG_DVB_TUNER_DIB0070=m
CONFIG_DVB_TUNER_DIB0090=m
#
# SEC control devices for DVB-S
#
CONFIG_DVB_DRX39XYJ=m
CONFIG_DVB_LNBP21=m
CONFIG_DVB_LNBP22=m
CONFIG_DVB_ISL6405=m
CONFIG_DVB_ISL6421=m
CONFIG_DVB_ISL6423=m
CONFIG_DVB_A8293=m
CONFIG_DVB_LGS8GXX=m
CONFIG_DVB_ATBM8830=m
CONFIG_DVB_TDA665x=m
CONFIG_DVB_IX2505V=m
CONFIG_DVB_M88RS2000=m
CONFIG_DVB_AF9033=m
#
# Tools to develop new frontends
#
# CONFIG_DVB_DUMMY_FE is not set
#
# Graphics support
#
CONFIG_AGP=y
CONFIG_AGP_AMD64=y
CONFIG_AGP_INTEL=y
CONFIG_AGP_SIS=y
CONFIG_AGP_VIA=y
CONFIG_INTEL_GTT=y
CONFIG_VGA_ARB=y
CONFIG_VGA_ARB_MAX_GPUS=64
CONFIG_VGA_SWITCHEROO=y
CONFIG_DRM=m
CONFIG_DRM_MIPI_DSI=y
CONFIG_DRM_KMS_HELPER=m
CONFIG_DRM_KMS_FB_HELPER=y
CONFIG_DRM_FBDEV_EMULATION=y
CONFIG_DRM_LOAD_EDID_FIRMWARE=y
CONFIG_DRM_TTM=m
#
# I2C encoder or helper chips
#
# CONFIG_DRM_I2C_ADV7511 is not set
CONFIG_DRM_I2C_CH7006=m
CONFIG_DRM_I2C_SIL164=m
CONFIG_DRM_I2C_NXP_TDA998X=m
# CONFIG_DRM_TDFX is not set
# CONFIG_DRM_R128 is not set
CONFIG_DRM_RADEON=m
# CONFIG_DRM_RADEON_USERPTR is not set
# CONFIG_DRM_RADEON_UMS is not set
# CONFIG_DRM_AMDGPU is not set
CONFIG_DRM_NOUVEAU=m
CONFIG_NOUVEAU_DEBUG=5
CONFIG_NOUVEAU_DEBUG_DEFAULT=3
CONFIG_DRM_NOUVEAU_BACKLIGHT=y
# CONFIG_DRM_I810 is not set
CONFIG_DRM_I915=m
# CONFIG_DRM_I915_PRELIMINARY_HW_SUPPORT is not set
# CONFIG_DRM_MGA is not set
# CONFIG_DRM_SIS is not set
# CONFIG_DRM_VIA is not set
# CONFIG_DRM_SAVAGE is not set
# CONFIG_DRM_VGEM is not set
CONFIG_DRM_VMWGFX=m
CONFIG_DRM_VMWGFX_FBCON=y
CONFIG_DRM_GMA500=m
CONFIG_DRM_GMA600=y
CONFIG_DRM_GMA3600=y
CONFIG_DRM_UDL=m
CONFIG_DRM_AST=m
CONFIG_DRM_MGAG200=m
CONFIG_DRM_CIRRUS_QEMU=m
CONFIG_DRM_QXL=m
CONFIG_DRM_BOCHS=m
# CONFIG_DRM_VIRTIO_GPU is not set
CONFIG_DRM_PANEL=y
#
# Display Panels
#
CONFIG_DRM_BRIDGE=y
#
# Display Interface Bridges
#
# CONFIG_HSA_AMD is not set
#
# Frame buffer Devices
#
CONFIG_FB=y
# CONFIG_FIRMWARE_EDID is not set
CONFIG_FB_CMDLINE=y
# CONFIG_FB_DDC is not set
CONFIG_FB_BOOT_VESA_SUPPORT=y
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
CONFIG_FB_SYS_FILLRECT=m
CONFIG_FB_SYS_COPYAREA=m
CONFIG_FB_SYS_IMAGEBLIT=m
# CONFIG_FB_FOREIGN_ENDIAN is not set
CONFIG_FB_SYS_FOPS=m
CONFIG_FB_DEFERRED_IO=y
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
CONFIG_FB_BACKLIGHT=y
# CONFIG_FB_MODE_HELPERS is not set
CONFIG_FB_TILEBLITTING=y
#
# Frame buffer hardware drivers
#
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ARC is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_VGA16 is not set
# CONFIG_FB_UVESA is not set
CONFIG_FB_VESA=y
CONFIG_FB_EFI=y
# CONFIG_FB_N411 is not set
# CONFIG_FB_HGA is not set
# CONFIG_FB_OPENCORES is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_I740 is not set
# CONFIG_FB_LE80578 is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_S3 is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_VT8623 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_ARK is not set
# CONFIG_FB_PM3 is not set
# CONFIG_FB_CARMINE is not set
# CONFIG_FB_SM501 is not set
# CONFIG_FB_SMSCUFX is not set
# CONFIG_FB_UDL is not set
# CONFIG_FB_IBM_GXT4500 is not set
# CONFIG_FB_VIRTUAL is not set
# CONFIG_XEN_FBDEV_FRONTEND is not set
# CONFIG_FB_METRONOME is not set
# CONFIG_FB_MB862XX is not set
# CONFIG_FB_BROADSHEET is not set
# CONFIG_FB_AUO_K190X is not set
CONFIG_FB_HYPERV=m
# CONFIG_FB_SIMPLE is not set
# CONFIG_FB_SM712 is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_LCD_CLASS_DEVICE=m
CONFIG_LCD_PLATFORM=m
CONFIG_BACKLIGHT_CLASS_DEVICE=y
# CONFIG_BACKLIGHT_GENERIC is not set
CONFIG_BACKLIGHT_APPLE=m
# CONFIG_BACKLIGHT_PM8941_WLED is not set
# CONFIG_BACKLIGHT_SAHARA is not set
# CONFIG_BACKLIGHT_ADP8860 is not set
# CONFIG_BACKLIGHT_ADP8870 is not set
# CONFIG_BACKLIGHT_LM3639 is not set
# CONFIG_BACKLIGHT_LV5207LP is not set
# CONFIG_BACKLIGHT_BD6107 is not set
# CONFIG_VGASTATE is not set
CONFIG_HDMI=y
#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
CONFIG_VGACON_SOFT_SCROLLBACK=y
CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64
CONFIG_DUMMY_CONSOLE=y
CONFIG_DUMMY_CONSOLE_COLUMNS=80
CONFIG_DUMMY_CONSOLE_ROWS=25
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
CONFIG_LOGO_LINUX_CLUT224=y
CONFIG_SOUND=m
CONFIG_SOUND_OSS_CORE=y
CONFIG_SOUND_OSS_CORE_PRECLAIM=y
CONFIG_SND=m
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
CONFIG_SND_HWDEP=m
CONFIG_SND_RAWMIDI=m
CONFIG_SND_JACK=y
CONFIG_SND_SEQUENCER=m
CONFIG_SND_SEQ_DUMMY=m
CONFIG_SND_OSSEMUL=y
# CONFIG_SND_MIXER_OSS is not set
# CONFIG_SND_PCM_OSS is not set
CONFIG_SND_PCM_TIMER=y
CONFIG_SND_SEQUENCER_OSS=y
CONFIG_SND_HRTIMER=m
CONFIG_SND_SEQ_HRTIMER_DEFAULT=y
CONFIG_SND_DYNAMIC_MINORS=y
CONFIG_SND_MAX_CARDS=32
# CONFIG_SND_SUPPORT_OLD_API is not set
CONFIG_SND_PROC_FS=y
CONFIG_SND_VERBOSE_PROCFS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
CONFIG_SND_VMASTER=y
CONFIG_SND_DMA_SGBUF=y
CONFIG_SND_RAWMIDI_SEQ=m
CONFIG_SND_OPL3_LIB_SEQ=m
# CONFIG_SND_OPL4_LIB_SEQ is not set
# CONFIG_SND_SBAWE_SEQ is not set
CONFIG_SND_EMU10K1_SEQ=m
CONFIG_SND_MPU401_UART=m
CONFIG_SND_OPL3_LIB=m
CONFIG_SND_VX_LIB=m
CONFIG_SND_AC97_CODEC=m
CONFIG_SND_DRIVERS=y
CONFIG_SND_PCSP=m
CONFIG_SND_DUMMY=m
CONFIG_SND_ALOOP=m
CONFIG_SND_VIRMIDI=m
CONFIG_SND_MTPAV=m
# CONFIG_SND_MTS64 is not set
# CONFIG_SND_SERIAL_U16550 is not set
CONFIG_SND_MPU401=m
# CONFIG_SND_PORTMAN2X4 is not set
CONFIG_SND_AC97_POWER_SAVE=y
CONFIG_SND_AC97_POWER_SAVE_DEFAULT=5
CONFIG_SND_PCI=y
CONFIG_SND_AD1889=m
# CONFIG_SND_ALS300 is not set
# CONFIG_SND_ALS4000 is not set
CONFIG_SND_ALI5451=m
CONFIG_SND_ASIHPI=m
CONFIG_SND_ATIIXP=m
CONFIG_SND_ATIIXP_MODEM=m
CONFIG_SND_AU8810=m
CONFIG_SND_AU8820=m
CONFIG_SND_AU8830=m
# CONFIG_SND_AW2 is not set
# CONFIG_SND_AZT3328 is not set
CONFIG_SND_BT87X=m
# CONFIG_SND_BT87X_OVERCLOCK is not set
CONFIG_SND_CA0106=m
CONFIG_SND_CMIPCI=m
CONFIG_SND_OXYGEN_LIB=m
CONFIG_SND_OXYGEN=m
# CONFIG_SND_CS4281 is not set
CONFIG_SND_CS46XX=m
CONFIG_SND_CS46XX_NEW_DSP=y
CONFIG_SND_CTXFI=m
CONFIG_SND_DARLA20=m
CONFIG_SND_GINA20=m
CONFIG_SND_LAYLA20=m
CONFIG_SND_DARLA24=m
CONFIG_SND_GINA24=m
CONFIG_SND_LAYLA24=m
CONFIG_SND_MONA=m
CONFIG_SND_MIA=m
CONFIG_SND_ECHO3G=m
CONFIG_SND_INDIGO=m
CONFIG_SND_INDIGOIO=m
CONFIG_SND_INDIGODJ=m
CONFIG_SND_INDIGOIOX=m
CONFIG_SND_INDIGODJX=m
CONFIG_SND_EMU10K1=m
CONFIG_SND_EMU10K1X=m
CONFIG_SND_ENS1370=m
CONFIG_SND_ENS1371=m
# CONFIG_SND_ES1938 is not set
CONFIG_SND_ES1968=m
CONFIG_SND_ES1968_INPUT=y
CONFIG_SND_ES1968_RADIO=y
# CONFIG_SND_FM801 is not set
CONFIG_SND_HDSP=m
CONFIG_SND_HDSPM=m
CONFIG_SND_ICE1712=m
CONFIG_SND_ICE1724=m
CONFIG_SND_INTEL8X0=m
CONFIG_SND_INTEL8X0M=m
CONFIG_SND_KORG1212=m
CONFIG_SND_LOLA=m
CONFIG_SND_LX6464ES=m
CONFIG_SND_MAESTRO3=m
CONFIG_SND_MAESTRO3_INPUT=y
CONFIG_SND_MIXART=m
# CONFIG_SND_NM256 is not set
CONFIG_SND_PCXHR=m
# CONFIG_SND_RIPTIDE is not set
CONFIG_SND_RME32=m
CONFIG_SND_RME96=m
CONFIG_SND_RME9652=m
# CONFIG_SND_SONICVIBES is not set
CONFIG_SND_TRIDENT=m
CONFIG_SND_VIA82XX=m
CONFIG_SND_VIA82XX_MODEM=m
CONFIG_SND_VIRTUOSO=m
CONFIG_SND_VX222=m
# CONFIG_SND_YMFPCI is not set
#
# HD-Audio
#
CONFIG_SND_HDA=m
CONFIG_SND_HDA_INTEL=m
CONFIG_SND_HDA_HWDEP=y
CONFIG_SND_HDA_RECONFIG=y
CONFIG_SND_HDA_INPUT_BEEP=y
CONFIG_SND_HDA_INPUT_BEEP_MODE=0
CONFIG_SND_HDA_PATCH_LOADER=y
CONFIG_SND_HDA_CODEC_REALTEK=m
CONFIG_SND_HDA_CODEC_ANALOG=m
CONFIG_SND_HDA_CODEC_SIGMATEL=m
CONFIG_SND_HDA_CODEC_VIA=m
CONFIG_SND_HDA_CODEC_HDMI=m
CONFIG_SND_HDA_CODEC_CIRRUS=m
CONFIG_SND_HDA_CODEC_CONEXANT=m
CONFIG_SND_HDA_CODEC_CA0110=m
CONFIG_SND_HDA_CODEC_CA0132=m
CONFIG_SND_HDA_CODEC_CA0132_DSP=y
CONFIG_SND_HDA_CODEC_CMEDIA=m
CONFIG_SND_HDA_CODEC_SI3054=m
CONFIG_SND_HDA_GENERIC=m
CONFIG_SND_HDA_POWER_SAVE_DEFAULT=0
CONFIG_SND_HDA_CORE=m
CONFIG_SND_HDA_DSP_LOADER=y
CONFIG_SND_HDA_I915=y
CONFIG_SND_HDA_PREALLOC_SIZE=512
CONFIG_SND_USB=y
CONFIG_SND_USB_AUDIO=m
CONFIG_SND_USB_UA101=m
CONFIG_SND_USB_USX2Y=m
CONFIG_SND_USB_CAIAQ=m
CONFIG_SND_USB_CAIAQ_INPUT=y
CONFIG_SND_USB_US122L=m
CONFIG_SND_USB_6FIRE=m
# CONFIG_SND_USB_HIFACE is not set
# CONFIG_SND_BCD2000 is not set
# CONFIG_SND_USB_POD is not set
# CONFIG_SND_USB_PODHD is not set
# CONFIG_SND_USB_TONEPORT is not set
# CONFIG_SND_USB_VARIAX is not set
CONFIG_SND_FIREWIRE=y
CONFIG_SND_FIREWIRE_LIB=m
# CONFIG_SND_DICE is not set
# CONFIG_SND_OXFW is not set
CONFIG_SND_ISIGHT=m
CONFIG_SND_SCS1X=m
# CONFIG_SND_FIREWORKS is not set
# CONFIG_SND_BEBOB is not set
# CONFIG_SND_FIREWIRE_DIGI00X is not set
# CONFIG_SND_FIREWIRE_TASCAM is not set
# CONFIG_SND_SOC is not set
# CONFIG_SOUND_PRIME is not set
CONFIG_AC97_BUS=m
#
# HID support
#
CONFIG_HID=y
CONFIG_HID_BATTERY_STRENGTH=y
CONFIG_HIDRAW=y
CONFIG_UHID=m
CONFIG_HID_GENERIC=y
#
# Special HID drivers
#
CONFIG_HID_A4TECH=y
CONFIG_HID_ACRUX=m
# CONFIG_HID_ACRUX_FF is not set
CONFIG_HID_APPLE=y
CONFIG_HID_APPLEIR=m
CONFIG_HID_AUREAL=m
CONFIG_HID_BELKIN=y
# CONFIG_HID_BETOP_FF is not set
CONFIG_HID_CHERRY=y
CONFIG_HID_CHICONY=y
# CONFIG_HID_CORSAIR is not set
CONFIG_HID_PRODIKEYS=m
CONFIG_HID_CYPRESS=y
CONFIG_HID_DRAGONRISE=m
# CONFIG_DRAGONRISE_FF is not set
# CONFIG_HID_EMS_FF is not set
CONFIG_HID_ELECOM=m
# CONFIG_HID_ELO is not set
CONFIG_HID_EZKEY=y
# CONFIG_HID_GEMBIRD is not set
# CONFIG_HID_GFRM is not set
CONFIG_HID_HOLTEK=m
# CONFIG_HOLTEK_FF is not set
# CONFIG_HID_GT683R is not set
CONFIG_HID_KEYTOUCH=m
CONFIG_HID_KYE=m
CONFIG_HID_UCLOGIC=m
CONFIG_HID_WALTOP=m
CONFIG_HID_GYRATION=m
CONFIG_HID_ICADE=m
CONFIG_HID_TWINHAN=m
CONFIG_HID_KENSINGTON=y
CONFIG_HID_LCPOWER=m
# CONFIG_HID_LENOVO is not set
CONFIG_HID_LOGITECH=y
CONFIG_HID_LOGITECH_DJ=m
CONFIG_HID_LOGITECH_HIDPP=m
# CONFIG_LOGITECH_FF is not set
# CONFIG_LOGIRUMBLEPAD2_FF is not set
# CONFIG_LOGIG940_FF is not set
# CONFIG_LOGIWHEELS_FF is not set
CONFIG_HID_MAGICMOUSE=y
CONFIG_HID_MICROSOFT=y
CONFIG_HID_MONTEREY=y
CONFIG_HID_MULTITOUCH=m
CONFIG_HID_NTRIG=y
CONFIG_HID_ORTEK=m
CONFIG_HID_PANTHERLORD=m
# CONFIG_PANTHERLORD_FF is not set
# CONFIG_HID_PENMOUNT is not set
CONFIG_HID_PETALYNX=m
CONFIG_HID_PICOLCD=m
CONFIG_HID_PICOLCD_FB=y
CONFIG_HID_PICOLCD_BACKLIGHT=y
CONFIG_HID_PICOLCD_LCD=y
CONFIG_HID_PICOLCD_LEDS=y
CONFIG_HID_PICOLCD_CIR=y
# CONFIG_HID_PLANTRONICS is not set
CONFIG_HID_PRIMAX=m
CONFIG_HID_ROCCAT=m
CONFIG_HID_SAITEK=m
CONFIG_HID_SAMSUNG=m
CONFIG_HID_SONY=m
# CONFIG_SONY_FF is not set
CONFIG_HID_SPEEDLINK=m
CONFIG_HID_STEELSERIES=m
CONFIG_HID_SUNPLUS=m
CONFIG_HID_RMI=m
CONFIG_HID_GREENASIA=m
# CONFIG_GREENASIA_FF is not set
CONFIG_HID_HYPERV_MOUSE=m
CONFIG_HID_SMARTJOYPLUS=m
# CONFIG_SMARTJOYPLUS_FF is not set
CONFIG_HID_TIVO=m
CONFIG_HID_TOPSEED=m
CONFIG_HID_THINGM=m
CONFIG_HID_THRUSTMASTER=m
# CONFIG_THRUSTMASTER_FF is not set
CONFIG_HID_WACOM=m
CONFIG_HID_WIIMOTE=m
# CONFIG_HID_XINMO is not set
CONFIG_HID_ZEROPLUS=m
# CONFIG_ZEROPLUS_FF is not set
CONFIG_HID_ZYDACRON=m
# CONFIG_HID_SENSOR_HUB is not set
#
# USB HID support
#
CONFIG_USB_HID=y
CONFIG_HID_PID=y
CONFIG_USB_HIDDEV=y
#
# I2C HID support
#
CONFIG_I2C_HID=m
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_COMMON=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB=y
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
#
# Miscellaneous USB options
#
CONFIG_USB_DEFAULT_PERSIST=y
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_OTG is not set
# CONFIG_USB_OTG_WHITELIST is not set
# CONFIG_USB_ULPI_BUS is not set
CONFIG_USB_MON=y
CONFIG_USB_WUSB=m
CONFIG_USB_WUSB_CBAF=m
# CONFIG_USB_WUSB_CBAF_DEBUG is not set
#
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
CONFIG_USB_XHCI_HCD=y
CONFIG_USB_XHCI_PCI=y
# CONFIG_USB_XHCI_PLATFORM is not set
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
CONFIG_USB_EHCI_TT_NEWSCHED=y
CONFIG_USB_EHCI_PCI=y
# CONFIG_USB_EHCI_HCD_PLATFORM is not set
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1362_HCD is not set
# CONFIG_USB_FOTG210_HCD is not set
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_OHCI_HCD_PCI=y
# CONFIG_USB_OHCI_HCD_PLATFORM is not set
CONFIG_USB_UHCI_HCD=y
# CONFIG_USB_U132_HCD is not set
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
# CONFIG_USB_WHCI_HCD is not set
CONFIG_USB_HWA_HCD=m
# CONFIG_USB_HCD_BCMA is not set
# CONFIG_USB_HCD_SSB is not set
# CONFIG_USB_HCD_TEST_MODE is not set
#
# USB Device Class drivers
#
CONFIG_USB_ACM=m
CONFIG_USB_PRINTER=m
CONFIG_USB_WDM=m
CONFIG_USB_TMC=m
#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
#
# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
CONFIG_USB_STORAGE_REALTEK=m
CONFIG_REALTEK_AUTOPM=y
CONFIG_USB_STORAGE_DATAFAB=m
CONFIG_USB_STORAGE_FREECOM=m
CONFIG_USB_STORAGE_ISD200=m
CONFIG_USB_STORAGE_USBAT=m
CONFIG_USB_STORAGE_SDDR09=m
CONFIG_USB_STORAGE_SDDR55=m
CONFIG_USB_STORAGE_JUMPSHOT=m
CONFIG_USB_STORAGE_ALAUDA=m
CONFIG_USB_STORAGE_ONETOUCH=m
CONFIG_USB_STORAGE_KARMA=m
CONFIG_USB_STORAGE_CYPRESS_ATACB=m
CONFIG_USB_STORAGE_ENE_UB6250=m
# CONFIG_USB_UAS is not set
#
# USB Imaging devices
#
CONFIG_USB_MDC800=m
CONFIG_USB_MICROTEK=m
# CONFIG_USBIP_CORE is not set
# CONFIG_USB_MUSB_HDRC is not set
# CONFIG_USB_DWC3 is not set
# CONFIG_USB_DWC2 is not set
# CONFIG_USB_CHIPIDEA is not set
# CONFIG_USB_ISP1760 is not set
#
# USB port drivers
#
CONFIG_USB_USS720=m
CONFIG_USB_SERIAL=y
CONFIG_USB_SERIAL_CONSOLE=y
CONFIG_USB_SERIAL_GENERIC=y
# CONFIG_USB_SERIAL_SIMPLE is not set
CONFIG_USB_SERIAL_AIRCABLE=m
CONFIG_USB_SERIAL_ARK3116=m
CONFIG_USB_SERIAL_BELKIN=m
CONFIG_USB_SERIAL_CH341=m
CONFIG_USB_SERIAL_WHITEHEAT=m
CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
CONFIG_USB_SERIAL_CP210X=m
CONFIG_USB_SERIAL_CYPRESS_M8=m
CONFIG_USB_SERIAL_EMPEG=m
CONFIG_USB_SERIAL_FTDI_SIO=m
CONFIG_USB_SERIAL_VISOR=m
CONFIG_USB_SERIAL_IPAQ=m
CONFIG_USB_SERIAL_IR=m
CONFIG_USB_SERIAL_EDGEPORT=m
CONFIG_USB_SERIAL_EDGEPORT_TI=m
# CONFIG_USB_SERIAL_F81232 is not set
CONFIG_USB_SERIAL_GARMIN=m
CONFIG_USB_SERIAL_IPW=m
CONFIG_USB_SERIAL_IUU=m
CONFIG_USB_SERIAL_KEYSPAN_PDA=m
CONFIG_USB_SERIAL_KEYSPAN=m
CONFIG_USB_SERIAL_KLSI=m
CONFIG_USB_SERIAL_KOBIL_SCT=m
CONFIG_USB_SERIAL_MCT_U232=m
# CONFIG_USB_SERIAL_METRO is not set
CONFIG_USB_SERIAL_MOS7720=m
CONFIG_USB_SERIAL_MOS7715_PARPORT=y
CONFIG_USB_SERIAL_MOS7840=m
# CONFIG_USB_SERIAL_MXUPORT is not set
CONFIG_USB_SERIAL_NAVMAN=m
CONFIG_USB_SERIAL_PL2303=m
CONFIG_USB_SERIAL_OTI6858=m
CONFIG_USB_SERIAL_QCAUX=m
CONFIG_USB_SERIAL_QUALCOMM=m
CONFIG_USB_SERIAL_SPCP8X5=m
CONFIG_USB_SERIAL_SAFE=m
CONFIG_USB_SERIAL_SAFE_PADDED=y
CONFIG_USB_SERIAL_SIERRAWIRELESS=m
CONFIG_USB_SERIAL_SYMBOL=m
CONFIG_USB_SERIAL_TI=m
CONFIG_USB_SERIAL_CYBERJACK=m
CONFIG_USB_SERIAL_XIRCOM=m
CONFIG_USB_SERIAL_WWAN=m
CONFIG_USB_SERIAL_OPTION=m
CONFIG_USB_SERIAL_OMNINET=m
CONFIG_USB_SERIAL_OPTICON=m
CONFIG_USB_SERIAL_XSENS_MT=m
# CONFIG_USB_SERIAL_WISHBONE is not set
CONFIG_USB_SERIAL_SSU100=m
CONFIG_USB_SERIAL_QT2=m
CONFIG_USB_SERIAL_DEBUG=m
#
# USB Miscellaneous drivers
#
CONFIG_USB_EMI62=m
CONFIG_USB_EMI26=m
CONFIG_USB_ADUTUX=m
CONFIG_USB_SEVSEG=m
# CONFIG_USB_RIO500 is not set
CONFIG_USB_LEGOTOWER=m
CONFIG_USB_LCD=m
CONFIG_USB_LED=m
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
CONFIG_USB_IDMOUSE=m
CONFIG_USB_FTDI_ELAN=m
CONFIG_USB_APPLEDISPLAY=m
CONFIG_USB_SISUSBVGA=m
CONFIG_USB_SISUSBVGA_CON=y
CONFIG_USB_LD=m
# CONFIG_USB_TRANCEVIBRATOR is not set
CONFIG_USB_IOWARRIOR=m
# CONFIG_USB_TEST is not set
# CONFIG_USB_EHSET_TEST_FIXTURE is not set
CONFIG_USB_ISIGHTFW=m
# CONFIG_USB_YUREX is not set
CONFIG_USB_EZUSB_FX2=m
CONFIG_USB_HSIC_USB3503=m
# CONFIG_USB_LINK_LAYER_TEST is not set
# CONFIG_USB_CHAOSKEY is not set
CONFIG_USB_ATM=m
CONFIG_USB_SPEEDTOUCH=m
CONFIG_USB_CXACRU=m
CONFIG_USB_UEAGLEATM=m
CONFIG_USB_XUSBATM=m
#
# USB Physical Layer drivers
#
# CONFIG_USB_PHY is not set
# CONFIG_NOP_USB_XCEIV is not set
# CONFIG_USB_ISP1301 is not set
# CONFIG_USB_GADGET is not set
# CONFIG_USB_LED_TRIG is not set
CONFIG_UWB=m
CONFIG_UWB_HWA=m
CONFIG_UWB_WHCI=m
CONFIG_UWB_I1480U=m
CONFIG_MMC=m
# CONFIG_MMC_DEBUG is not set
#
# MMC/SD/SDIO Card Drivers
#
CONFIG_MMC_BLOCK=m
CONFIG_MMC_BLOCK_MINORS=8
CONFIG_MMC_BLOCK_BOUNCE=y
CONFIG_SDIO_UART=m
# CONFIG_MMC_TEST is not set
#
# MMC/SD/SDIO Host Controller Drivers
#
CONFIG_MMC_SDHCI=m
CONFIG_MMC_SDHCI_PCI=m
CONFIG_MMC_RICOH_MMC=y
CONFIG_MMC_SDHCI_ACPI=m
CONFIG_MMC_SDHCI_PLTFM=m
# CONFIG_MMC_WBSD is not set
CONFIG_MMC_TIFM_SD=m
CONFIG_MMC_CB710=m
CONFIG_MMC_VIA_SDMMC=m
CONFIG_MMC_VUB300=m
CONFIG_MMC_USHC=m
# CONFIG_MMC_USDHI6ROL0 is not set
CONFIG_MMC_REALTEK_PCI=m
# CONFIG_MMC_TOSHIBA_PCI is not set
# CONFIG_MMC_MTK is not set
CONFIG_MEMSTICK=m
# CONFIG_MEMSTICK_DEBUG is not set
#
# MemoryStick drivers
#
# CONFIG_MEMSTICK_UNSAFE_RESUME is not set
CONFIG_MSPRO_BLOCK=m
# CONFIG_MS_BLOCK is not set
#
# MemoryStick Host Controller Drivers
#
CONFIG_MEMSTICK_TIFM_MS=m
CONFIG_MEMSTICK_JMICRON_38X=m
CONFIG_MEMSTICK_R592=m
CONFIG_MEMSTICK_REALTEK_PCI=m
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
# CONFIG_LEDS_CLASS_FLASH is not set
#
# LED drivers
#
CONFIG_LEDS_LM3530=m
# CONFIG_LEDS_LM3642 is not set
# CONFIG_LEDS_PCA9532 is not set
CONFIG_LEDS_LP3944=m
CONFIG_LEDS_LP55XX_COMMON=m
CONFIG_LEDS_LP5521=m
CONFIG_LEDS_LP5523=m
CONFIG_LEDS_LP5562=m
# CONFIG_LEDS_LP8501 is not set
# CONFIG_LEDS_LP8860 is not set
CONFIG_LEDS_CLEVO_MAIL=m
# CONFIG_LEDS_PCA955X is not set
# CONFIG_LEDS_PCA963X is not set
# CONFIG_LEDS_BD2802 is not set
CONFIG_LEDS_INTEL_SS4200=m
CONFIG_LEDS_DELL_NETBOOKS=m
# CONFIG_LEDS_TCA6507 is not set
# CONFIG_LEDS_TLC591XX is not set
# CONFIG_LEDS_LM355x is not set
#
# LED driver for blink(1) USB RGB LED is under Special HID drivers (HID_THINGM)
#
CONFIG_LEDS_BLINKM=m
#
# LED Triggers
#
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=m
CONFIG_LEDS_TRIGGER_ONESHOT=m
CONFIG_LEDS_TRIGGER_HEARTBEAT=m
CONFIG_LEDS_TRIGGER_BACKLIGHT=m
# CONFIG_LEDS_TRIGGER_CPU is not set
CONFIG_LEDS_TRIGGER_DEFAULT_ON=m
#
# iptables trigger is under Netfilter config (LED target)
#
CONFIG_LEDS_TRIGGER_TRANSIENT=m
CONFIG_LEDS_TRIGGER_CAMERA=m
# CONFIG_ACCESSIBILITY is not set
CONFIG_INFINIBAND=m
CONFIG_INFINIBAND_USER_MAD=m
CONFIG_INFINIBAND_USER_ACCESS=m
CONFIG_INFINIBAND_USER_MEM=y
CONFIG_INFINIBAND_ON_DEMAND_PAGING=y
CONFIG_INFINIBAND_ADDR_TRANS=y
CONFIG_INFINIBAND_MTHCA=m
CONFIG_INFINIBAND_MTHCA_DEBUG=y
CONFIG_INFINIBAND_QIB=m
CONFIG_INFINIBAND_QIB_DCA=y
CONFIG_INFINIBAND_CXGB3=m
# CONFIG_INFINIBAND_CXGB3_DEBUG is not set
CONFIG_INFINIBAND_CXGB4=m
CONFIG_MLX4_INFINIBAND=m
CONFIG_MLX5_INFINIBAND=m
CONFIG_INFINIBAND_NES=m
# CONFIG_INFINIBAND_NES_DEBUG is not set
CONFIG_INFINIBAND_OCRDMA=m
CONFIG_INFINIBAND_USNIC=m
CONFIG_INFINIBAND_IPOIB=m
CONFIG_INFINIBAND_IPOIB_CM=y
CONFIG_INFINIBAND_IPOIB_DEBUG=y
# CONFIG_INFINIBAND_IPOIB_DEBUG_DATA is not set
CONFIG_INFINIBAND_SRP=m
CONFIG_INFINIBAND_SRPT=m
CONFIG_INFINIBAND_ISER=m
CONFIG_INFINIBAND_ISERT=m
CONFIG_EDAC_ATOMIC_SCRUB=y
CONFIG_EDAC_SUPPORT=y
CONFIG_EDAC=y
CONFIG_EDAC_LEGACY_SYSFS=y
# CONFIG_EDAC_DEBUG is not set
CONFIG_EDAC_DECODE_MCE=m
CONFIG_EDAC_MM_EDAC=m
CONFIG_EDAC_AMD64=m
# CONFIG_EDAC_AMD64_ERROR_INJECTION is not set
CONFIG_EDAC_E752X=m
CONFIG_EDAC_I82975X=m
CONFIG_EDAC_I3000=m
CONFIG_EDAC_I3200=m
CONFIG_EDAC_IE31200=m
CONFIG_EDAC_X38=m
CONFIG_EDAC_I5400=m
CONFIG_EDAC_I7CORE=m
CONFIG_EDAC_I5000=m
CONFIG_EDAC_I5100=m
CONFIG_EDAC_I7300=m
CONFIG_EDAC_SBRIDGE=m
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
# CONFIG_RTC_SYSTOHC is not set
# CONFIG_RTC_DEBUG is not set
#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
# CONFIG_RTC_DRV_TEST is not set
#
# I2C RTC drivers
#
# CONFIG_RTC_DRV_ABB5ZES3 is not set
# CONFIG_RTC_DRV_ABX80X is not set
CONFIG_RTC_DRV_DS1307=m
CONFIG_RTC_DRV_DS1374=m
# CONFIG_RTC_DRV_DS1374_WDT is not set
CONFIG_RTC_DRV_DS1672=m
CONFIG_RTC_DRV_DS3232=m
CONFIG_RTC_DRV_MAX6900=m
CONFIG_RTC_DRV_RS5C372=m
CONFIG_RTC_DRV_ISL1208=m
CONFIG_RTC_DRV_ISL12022=m
# CONFIG_RTC_DRV_ISL12057 is not set
CONFIG_RTC_DRV_X1205=m
# CONFIG_RTC_DRV_PCF2127 is not set
CONFIG_RTC_DRV_PCF8523=m
CONFIG_RTC_DRV_PCF8563=m
# CONFIG_RTC_DRV_PCF85063 is not set
CONFIG_RTC_DRV_PCF8583=m
CONFIG_RTC_DRV_M41T80=m
CONFIG_RTC_DRV_M41T80_WDT=y
CONFIG_RTC_DRV_BQ32K=m
# CONFIG_RTC_DRV_S35390A is not set
CONFIG_RTC_DRV_FM3130=m
CONFIG_RTC_DRV_RX8581=m
CONFIG_RTC_DRV_RX8025=m
CONFIG_RTC_DRV_EM3027=m
CONFIG_RTC_DRV_RV3029C2=m
# CONFIG_RTC_DRV_RV8803 is not set
#
# SPI RTC drivers
#
#
# Platform RTC drivers
#
CONFIG_RTC_DRV_CMOS=y
CONFIG_RTC_DRV_DS1286=m
CONFIG_RTC_DRV_DS1511=m
CONFIG_RTC_DRV_DS1553=m
# CONFIG_RTC_DRV_DS1685_FAMILY is not set
CONFIG_RTC_DRV_DS1742=m
CONFIG_RTC_DRV_DS2404=m
CONFIG_RTC_DRV_STK17TA8=m
# CONFIG_RTC_DRV_M48T86 is not set
CONFIG_RTC_DRV_M48T35=m
CONFIG_RTC_DRV_M48T59=m
CONFIG_RTC_DRV_MSM6242=m
CONFIG_RTC_DRV_BQ4802=m
CONFIG_RTC_DRV_RP5C01=m
CONFIG_RTC_DRV_V3020=m
#
# on-CPU RTC drivers
#
#
# HID Sensor RTC drivers
#
# CONFIG_RTC_DRV_HID_SENSOR_TIME is not set
CONFIG_DMADEVICES=y
# CONFIG_DMADEVICES_DEBUG is not set
#
# DMA Devices
#
CONFIG_DMA_ENGINE=y
CONFIG_DMA_ACPI=y
# CONFIG_INTEL_IDMA64 is not set
CONFIG_INTEL_IOATDMA=m
CONFIG_DW_DMAC_CORE=m
CONFIG_DW_DMAC=m
# CONFIG_DW_DMAC_PCI is not set
#
# DMA Clients
#
CONFIG_ASYNC_TX_DMA=y
# CONFIG_DMATEST is not set
CONFIG_DMA_ENGINE_RAID=y
CONFIG_DCA=m
CONFIG_AUXDISPLAY=y
CONFIG_KS0108=m
CONFIG_KS0108_PORT=0x378
CONFIG_KS0108_DELAY=2
CONFIG_CFAG12864B=m
CONFIG_CFAG12864B_RATE=20
CONFIG_UIO=m
CONFIG_UIO_CIF=m
CONFIG_UIO_PDRV_GENIRQ=m
# CONFIG_UIO_DMEM_GENIRQ is not set
CONFIG_UIO_AEC=m
CONFIG_UIO_SERCOS3=m
CONFIG_UIO_PCI_GENERIC=m
# CONFIG_UIO_NETX is not set
# CONFIG_UIO_PRUSS is not set
# CONFIG_UIO_MF624 is not set
CONFIG_VFIO_IOMMU_TYPE1=m
CONFIG_VFIO_VIRQFD=m
CONFIG_VFIO=m
CONFIG_VFIO_PCI=m
# CONFIG_VFIO_PCI_VGA is not set
CONFIG_VFIO_PCI_MMAP=y
CONFIG_VFIO_PCI_INTX=y
CONFIG_IRQ_BYPASS_MANAGER=m
# CONFIG_VIRT_DRIVERS is not set
CONFIG_VIRTIO=m
#
# Virtio drivers
#
CONFIG_VIRTIO_PCI=m
CONFIG_VIRTIO_PCI_LEGACY=y
CONFIG_VIRTIO_BALLOON=m
CONFIG_VIRTIO_INPUT=m
# CONFIG_VIRTIO_MMIO is not set
#
# Microsoft Hyper-V guest support
#
CONFIG_HYPERV=m
CONFIG_HYPERV_UTILS=m
CONFIG_HYPERV_BALLOON=m
#
# Xen driver support
#
CONFIG_XEN_BALLOON=y
# CONFIG_XEN_SELFBALLOONING is not set
# CONFIG_XEN_BALLOON_MEMORY_HOTPLUG is not set
CONFIG_XEN_SCRUB_PAGES=y
CONFIG_XEN_DEV_EVTCHN=m
CONFIG_XEN_BACKEND=y
CONFIG_XENFS=m
CONFIG_XEN_COMPAT_XENFS=y
CONFIG_XEN_SYS_HYPERVISOR=y
CONFIG_XEN_XENBUS_FRONTEND=y
# CONFIG_XEN_GNTDEV is not set
# CONFIG_XEN_GRANT_DEV_ALLOC is not set
CONFIG_SWIOTLB_XEN=y
CONFIG_XEN_TMEM=m
CONFIG_XEN_PCIDEV_BACKEND=m
# CONFIG_XEN_SCSI_BACKEND is not set
CONFIG_XEN_PRIVCMD=m
CONFIG_XEN_ACPI_PROCESSOR=m
# CONFIG_XEN_MCE_LOG is not set
CONFIG_XEN_HAVE_PVMMU=y
CONFIG_XEN_EFI=y
CONFIG_XEN_AUTO_XLATE=y
CONFIG_XEN_ACPI=y
CONFIG_XEN_SYMS=y
CONFIG_XEN_HAVE_VPMU=y
CONFIG_STAGING=y
# CONFIG_SLICOSS is not set
# CONFIG_PRISM2_USB is not set
# CONFIG_COMEDI is not set
# CONFIG_PANEL is not set
# CONFIG_RTL8192U is not set
CONFIG_RTLLIB=m
CONFIG_RTLLIB_CRYPTO_CCMP=m
CONFIG_RTLLIB_CRYPTO_TKIP=m
CONFIG_RTLLIB_CRYPTO_WEP=m
CONFIG_RTL8192E=m
CONFIG_R8712U=m
# CONFIG_R8188EU is not set
# CONFIG_R8723AU is not set
# CONFIG_RTS5208 is not set
# CONFIG_VT6655 is not set
# CONFIG_VT6656 is not set
# CONFIG_FB_SM750 is not set
# CONFIG_FB_XGI is not set
#
# Speakup console speech
#
# CONFIG_SPEAKUP is not set
# CONFIG_TOUCHSCREEN_SYNAPTICS_I2C_RMI4 is not set
# CONFIG_STAGING_MEDIA is not set
# CONFIG_STAGING_RDMA is not set
#
# Android
#
# CONFIG_WIMAX_GDM72XX is not set
# CONFIG_LTE_GDM724X is not set
CONFIG_FIREWIRE_SERIAL=m
CONFIG_FWTTY_MAX_TOTAL_PORTS=64
CONFIG_FWTTY_MAX_CARD_PORTS=32
# CONFIG_LUSTRE_FS is not set
# CONFIG_DGNC is not set
# CONFIG_DGAP is not set
# CONFIG_GS_FPGABOOT is not set
# CONFIG_CRYPTO_SKEIN is not set
CONFIG_UNISYSSPAR=y
CONFIG_UNISYS_VISORBUS=m
CONFIG_UNISYS_VISORNIC=m
# CONFIG_UNISYS_VISORINPUT is not set
CONFIG_UNISYS_VISORHBA=m
# CONFIG_WILC1000_DRIVER is not set
# CONFIG_MOST is not set
CONFIG_X86_PLATFORM_DEVICES=y
CONFIG_ACER_WMI=m
CONFIG_ACERHDF=m
# CONFIG_ALIENWARE_WMI is not set
CONFIG_ASUS_LAPTOP=m
CONFIG_DELL_LAPTOP=m
CONFIG_DELL_WMI=m
CONFIG_DELL_WMI_AIO=m
# CONFIG_DELL_SMO8800 is not set
# CONFIG_DELL_RBTN is not set
CONFIG_FUJITSU_LAPTOP=m
# CONFIG_FUJITSU_LAPTOP_DEBUG is not set
CONFIG_FUJITSU_TABLET=m
CONFIG_AMILO_RFKILL=m
CONFIG_HP_ACCEL=m
CONFIG_HP_WIRELESS=m
CONFIG_HP_WMI=m
CONFIG_MSI_LAPTOP=m
CONFIG_PANASONIC_LAPTOP=m
CONFIG_COMPAL_LAPTOP=m
CONFIG_SONY_LAPTOP=m
CONFIG_SONYPI_COMPAT=y
CONFIG_IDEAPAD_LAPTOP=m
CONFIG_THINKPAD_ACPI=m
CONFIG_THINKPAD_ACPI_ALSA_SUPPORT=y
# CONFIG_THINKPAD_ACPI_DEBUGFACILITIES is not set
# CONFIG_THINKPAD_ACPI_DEBUG is not set
# CONFIG_THINKPAD_ACPI_UNSAFE_LEDS is not set
CONFIG_THINKPAD_ACPI_VIDEO=y
CONFIG_THINKPAD_ACPI_HOTKEY_POLL=y
CONFIG_SENSORS_HDAPS=m
# CONFIG_INTEL_MENLOW is not set
CONFIG_EEEPC_LAPTOP=m
CONFIG_ASUS_WMI=m
CONFIG_ASUS_NB_WMI=m
CONFIG_EEEPC_WMI=m
CONFIG_ACPI_WMI=m
CONFIG_MSI_WMI=m
CONFIG_TOPSTAR_LAPTOP=m
CONFIG_ACPI_TOSHIBA=m
CONFIG_TOSHIBA_BT_RFKILL=m
# CONFIG_TOSHIBA_HAPS is not set
# CONFIG_TOSHIBA_WMI is not set
CONFIG_ACPI_CMPC=m
CONFIG_INTEL_IPS=m
# CONFIG_IBM_RTL is not set
CONFIG_SAMSUNG_LAPTOP=m
CONFIG_MXM_WMI=m
CONFIG_INTEL_OAKTRAIL=m
CONFIG_SAMSUNG_Q10=m
CONFIG_APPLE_GMUX=m
# CONFIG_INTEL_RST is not set
# CONFIG_INTEL_SMARTCONNECT is not set
CONFIG_PVPANIC=y
# CONFIG_INTEL_PMC_IPC is not set
# CONFIG_SURFACE_PRO3_BUTTON is not set
# CONFIG_CHROME_PLATFORMS is not set
CONFIG_CLKDEV_LOOKUP=y
CONFIG_HAVE_CLK_PREPARE=y
CONFIG_COMMON_CLK=y
#
# Common Clock Framework
#
# CONFIG_COMMON_CLK_SI5351 is not set
# CONFIG_COMMON_CLK_PXA is not set
# CONFIG_COMMON_CLK_CDCE706 is not set
#
# Hardware Spinlock drivers
#
#
# Clock Source drivers
#
CONFIG_CLKEVT_I8253=y
CONFIG_I8253_LOCK=y
CONFIG_CLKBLD_I8253=y
# CONFIG_ATMEL_PIT is not set
# CONFIG_SH_TIMER_CMT is not set
# CONFIG_SH_TIMER_MTU2 is not set
# CONFIG_SH_TIMER_TMU is not set
# CONFIG_EM_TIMER_STI is not set
# CONFIG_MAILBOX is not set
CONFIG_IOMMU_API=y
CONFIG_IOMMU_SUPPORT=y
#
# Generic IOMMU Pagetable Support
#
CONFIG_IOMMU_IOVA=y
CONFIG_AMD_IOMMU=y
CONFIG_AMD_IOMMU_STATS=y
CONFIG_AMD_IOMMU_V2=m
CONFIG_DMAR_TABLE=y
CONFIG_INTEL_IOMMU=y
# CONFIG_INTEL_IOMMU_SVM is not set
# CONFIG_INTEL_IOMMU_DEFAULT_ON is not set
CONFIG_INTEL_IOMMU_FLOPPY_WA=y
CONFIG_IRQ_REMAP=y
#
# Remoteproc drivers
#
# CONFIG_STE_MODEM_RPROC is not set
#
# Rpmsg drivers
#
#
# SOC (System On Chip) specific Drivers
#
# CONFIG_SUNXI_SRAM is not set
# CONFIG_SOC_TI is not set
CONFIG_PM_DEVFREQ=y
#
# DEVFREQ Governors
#
CONFIG_DEVFREQ_GOV_SIMPLE_ONDEMAND=m
# CONFIG_DEVFREQ_GOV_PERFORMANCE is not set
# CONFIG_DEVFREQ_GOV_POWERSAVE is not set
# CONFIG_DEVFREQ_GOV_USERSPACE is not set
#
# DEVFREQ Drivers
#
# CONFIG_PM_DEVFREQ_EVENT is not set
# CONFIG_EXTCON is not set
# CONFIG_MEMORY is not set
# CONFIG_IIO is not set
CONFIG_NTB=m
# CONFIG_NTB_INTEL is not set
# CONFIG_NTB_PINGPONG is not set
# CONFIG_NTB_TOOL is not set
# CONFIG_NTB_TRANSPORT is not set
# CONFIG_VME_BUS is not set
# CONFIG_PWM is not set
# CONFIG_IPACK_BUS is not set
# CONFIG_RESET_CONTROLLER is not set
# CONFIG_FMC is not set
#
# PHY Subsystem
#
CONFIG_GENERIC_PHY=y
# CONFIG_PHY_PXA_28NM_HSIC is not set
# CONFIG_PHY_PXA_28NM_USB2 is not set
# CONFIG_BCM_KONA_USB2_PHY is not set
CONFIG_POWERCAP=y
# CONFIG_MCB is not set
#
# Performance monitor support
#
CONFIG_RAS=y
# CONFIG_AMD_MCE_INJ is not set
# CONFIG_THUNDERBOLT is not set
#
# Android
#
# CONFIG_ANDROID is not set
# CONFIG_LIBNVDIMM is not set
# CONFIG_NVMEM is not set
# CONFIG_STM is not set
# CONFIG_STM_DUMMY is not set
# CONFIG_STM_SOURCE_CONSOLE is not set
# CONFIG_INTEL_TH is not set
#
# FPGA Configuration Support
#
# CONFIG_FPGA is not set
#
# Firmware Drivers
#
CONFIG_EDD=m
# CONFIG_EDD_OFF is not set
CONFIG_FIRMWARE_MEMMAP=y
CONFIG_DELL_RBU=m
CONFIG_DCDBAS=m
CONFIG_DMIID=y
CONFIG_DMI_SYSFS=y
CONFIG_DMI_SCAN_MACHINE_NON_EFI_FALLBACK=y
CONFIG_ISCSI_IBFT_FIND=y
CONFIG_ISCSI_IBFT=m
# CONFIG_GOOGLE_FIRMWARE is not set
#
# EFI (Extensible Firmware Interface) Support
#
CONFIG_EFI_VARS=y
CONFIG_EFI_ESRT=y
CONFIG_EFI_VARS_PSTORE=y
CONFIG_EFI_VARS_PSTORE_DEFAULT_DISABLE=y
CONFIG_EFI_RUNTIME_MAP=y
# CONFIG_EFI_FAKE_MEMMAP is not set
CONFIG_EFI_RUNTIME_WRAPPERS=y
CONFIG_UEFI_CPER=y
#
# File systems
#
CONFIG_DCACHE_WORD_ACCESS=y
# CONFIG_EXT2_FS is not set
# CONFIG_EXT3_FS is not set
CONFIG_EXT4_FS=m
CONFIG_EXT4_USE_FOR_EXT2=y
CONFIG_EXT4_FS_POSIX_ACL=y
CONFIG_EXT4_FS_SECURITY=y
# CONFIG_EXT4_ENCRYPTION is not set
# CONFIG_EXT4_DEBUG is not set
CONFIG_JBD2=m
# CONFIG_JBD2_DEBUG is not set
CONFIG_FS_MBCACHE=m
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_XFS_FS=m
CONFIG_XFS_QUOTA=y
CONFIG_XFS_POSIX_ACL=y
# CONFIG_XFS_RT is not set
# CONFIG_XFS_WARN is not set
# CONFIG_XFS_DEBUG is not set
CONFIG_GFS2_FS=m
CONFIG_GFS2_FS_LOCKING_DLM=y
# CONFIG_OCFS2_FS is not set
CONFIG_BTRFS_FS=m
CONFIG_BTRFS_FS_POSIX_ACL=y
# CONFIG_BTRFS_FS_CHECK_INTEGRITY is not set
# CONFIG_BTRFS_FS_RUN_SANITY_TESTS is not set
# CONFIG_BTRFS_DEBUG is not set
# CONFIG_BTRFS_ASSERT is not set
# CONFIG_NILFS2_FS is not set
# CONFIG_F2FS_FS is not set
# CONFIG_FS_DAX is not set
CONFIG_FS_POSIX_ACL=y
CONFIG_EXPORTFS=y
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_FANOTIFY=y
CONFIG_FANOTIFY_ACCESS_PERMISSIONS=y
CONFIG_QUOTA=y
CONFIG_QUOTA_NETLINK_INTERFACE=y
CONFIG_PRINT_QUOTA_WARNING=y
# CONFIG_QUOTA_DEBUG is not set
CONFIG_QUOTA_TREE=y
# CONFIG_QFMT_V1 is not set
CONFIG_QFMT_V2=y
CONFIG_QUOTACTL=y
CONFIG_QUOTACTL_COMPAT=y
CONFIG_AUTOFS4_FS=y
CONFIG_FUSE_FS=m
CONFIG_CUSE=m
CONFIG_OVERLAY_FS=m
#
# Caches
#
CONFIG_FSCACHE=m
CONFIG_FSCACHE_STATS=y
# CONFIG_FSCACHE_HISTOGRAM is not set
# CONFIG_FSCACHE_DEBUG is not set
# CONFIG_FSCACHE_OBJECT_LIST is not set
CONFIG_CACHEFILES=m
# CONFIG_CACHEFILES_DEBUG is not set
# CONFIG_CACHEFILES_HISTOGRAM is not set
#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_UDF_FS=m
CONFIG_UDF_NLS=y
#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="ascii"
# CONFIG_NTFS_FS is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_VMCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
# CONFIG_PROC_CHILDREN is not set
CONFIG_KERNFS=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
CONFIG_TMPFS_XATTR=y
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
CONFIG_CONFIGFS_FS=y
CONFIG_EFIVAR_FS=y
CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_ECRYPT_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_JFFS2_FS is not set
# CONFIG_UBIFS_FS is not set
# CONFIG_LOGFS is not set
CONFIG_CRAMFS=m
CONFIG_SQUASHFS=m
CONFIG_SQUASHFS_FILE_CACHE=y
# CONFIG_SQUASHFS_FILE_DIRECT is not set
CONFIG_SQUASHFS_DECOMP_SINGLE=y
# CONFIG_SQUASHFS_DECOMP_MULTI is not set
# CONFIG_SQUASHFS_DECOMP_MULTI_PERCPU is not set
CONFIG_SQUASHFS_XATTR=y
CONFIG_SQUASHFS_ZLIB=y
# CONFIG_SQUASHFS_LZ4 is not set
CONFIG_SQUASHFS_LZO=y
CONFIG_SQUASHFS_XZ=y
# CONFIG_SQUASHFS_4K_DEVBLK_SIZE is not set
# CONFIG_SQUASHFS_EMBEDDED is not set
CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_QNX6FS_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_PSTORE=y
# CONFIG_PSTORE_CONSOLE is not set
# CONFIG_PSTORE_PMSG is not set
# CONFIG_PSTORE_FTRACE is not set
CONFIG_PSTORE_RAM=m
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
# CONFIG_EXOFS_FS is not set
CONFIG_ORE=m
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=m
# CONFIG_NFS_V2 is not set
CONFIG_NFS_V3=m
CONFIG_NFS_V3_ACL=y
CONFIG_NFS_V4=m
# CONFIG_NFS_SWAP is not set
CONFIG_NFS_V4_1=y
CONFIG_NFS_V4_2=y
CONFIG_PNFS_FILE_LAYOUT=m
CONFIG_PNFS_BLOCK=m
CONFIG_PNFS_OBJLAYOUT=m
CONFIG_PNFS_FLEXFILE_LAYOUT=m
CONFIG_NFS_V4_1_IMPLEMENTATION_ID_DOMAIN="kernel.org"
# CONFIG_NFS_V4_1_MIGRATION is not set
CONFIG_NFS_V4_SECURITY_LABEL=y
CONFIG_NFS_FSCACHE=y
# CONFIG_NFS_USE_LEGACY_DNS is not set
CONFIG_NFS_USE_KERNEL_DNS=y
CONFIG_NFS_DEBUG=y
CONFIG_NFSD=m
CONFIG_NFSD_V2_ACL=y
CONFIG_NFSD_V3=y
CONFIG_NFSD_V3_ACL=y
CONFIG_NFSD_V4=y
# CONFIG_NFSD_PNFS is not set
CONFIG_NFSD_V4_SECURITY_LABEL=y
# CONFIG_NFSD_FAULT_INJECTION is not set
CONFIG_GRACE_PERIOD=m
CONFIG_LOCKD=m
CONFIG_LOCKD_V4=y
CONFIG_NFS_ACL_SUPPORT=m
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=m
CONFIG_SUNRPC_GSS=m
CONFIG_SUNRPC_BACKCHANNEL=y
CONFIG_RPCSEC_GSS_KRB5=m
CONFIG_SUNRPC_DEBUG=y
CONFIG_SUNRPC_XPRT_RDMA=m
CONFIG_CEPH_FS=m
# CONFIG_CEPH_FSCACHE is not set
# CONFIG_CEPH_FS_POSIX_ACL is not set
CONFIG_CIFS=m
CONFIG_CIFS_STATS=y
# CONFIG_CIFS_STATS2 is not set
CONFIG_CIFS_WEAK_PW_HASH=y
CONFIG_CIFS_UPCALL=y
CONFIG_CIFS_XATTR=y
CONFIG_CIFS_POSIX=y
CONFIG_CIFS_ACL=y
CONFIG_CIFS_DEBUG=y
# CONFIG_CIFS_DEBUG2 is not set
CONFIG_CIFS_DFS_UPCALL=y
CONFIG_CIFS_SMB2=y
# CONFIG_CIFS_SMB311 is not set
# CONFIG_CIFS_FSCACHE is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="utf8"
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_CODEPAGE_737=m
CONFIG_NLS_CODEPAGE_775=m
CONFIG_NLS_CODEPAGE_850=m
CONFIG_NLS_CODEPAGE_852=m
CONFIG_NLS_CODEPAGE_855=m
CONFIG_NLS_CODEPAGE_857=m
CONFIG_NLS_CODEPAGE_860=m
CONFIG_NLS_CODEPAGE_861=m
CONFIG_NLS_CODEPAGE_862=m
CONFIG_NLS_CODEPAGE_863=m
CONFIG_NLS_CODEPAGE_864=m
CONFIG_NLS_CODEPAGE_865=m
CONFIG_NLS_CODEPAGE_866=m
CONFIG_NLS_CODEPAGE_869=m
CONFIG_NLS_CODEPAGE_936=m
CONFIG_NLS_CODEPAGE_950=m
CONFIG_NLS_CODEPAGE_932=m
CONFIG_NLS_CODEPAGE_949=m
CONFIG_NLS_CODEPAGE_874=m
CONFIG_NLS_ISO8859_8=m
CONFIG_NLS_CODEPAGE_1250=m
CONFIG_NLS_CODEPAGE_1251=m
CONFIG_NLS_ASCII=y
CONFIG_NLS_ISO8859_1=m
CONFIG_NLS_ISO8859_2=m
CONFIG_NLS_ISO8859_3=m
CONFIG_NLS_ISO8859_4=m
CONFIG_NLS_ISO8859_5=m
CONFIG_NLS_ISO8859_6=m
CONFIG_NLS_ISO8859_7=m
CONFIG_NLS_ISO8859_9=m
CONFIG_NLS_ISO8859_13=m
CONFIG_NLS_ISO8859_14=m
CONFIG_NLS_ISO8859_15=m
CONFIG_NLS_KOI8_R=m
CONFIG_NLS_KOI8_U=m
CONFIG_NLS_MAC_ROMAN=m
CONFIG_NLS_MAC_CELTIC=m
CONFIG_NLS_MAC_CENTEURO=m
CONFIG_NLS_MAC_CROATIAN=m
CONFIG_NLS_MAC_CYRILLIC=m
CONFIG_NLS_MAC_GAELIC=m
CONFIG_NLS_MAC_GREEK=m
CONFIG_NLS_MAC_ICELAND=m
CONFIG_NLS_MAC_INUIT=m
CONFIG_NLS_MAC_ROMANIAN=m
CONFIG_NLS_MAC_TURKISH=m
CONFIG_NLS_UTF8=m
CONFIG_DLM=m
CONFIG_DLM_DEBUG=y
#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
#
# printk and dmesg options
#
CONFIG_PRINTK_TIME=y
CONFIG_MESSAGE_LOGLEVEL_DEFAULT=4
CONFIG_BOOT_PRINTK_DELAY=y
CONFIG_DYNAMIC_DEBUG=y
#
# Compile-time checks and compiler options
#
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_INFO_REDUCED is not set
# CONFIG_DEBUG_INFO_SPLIT is not set
# CONFIG_DEBUG_INFO_DWARF4 is not set
# CONFIG_GDB_SCRIPTS is not set
# CONFIG_ENABLE_WARN_DEPRECATED is not set
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=2048
CONFIG_STRIP_ASM_SYMS=y
# CONFIG_READABLE_ASM is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_PAGE_OWNER is not set
CONFIG_DEBUG_FS=y
CONFIG_HEADERS_CHECK=y
CONFIG_DEBUG_SECTION_MISMATCH=y
CONFIG_SECTION_MISMATCH_WARN_ONLY=y
CONFIG_ARCH_WANT_FRAME_POINTERS=y
CONFIG_FRAME_POINTER=y
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
CONFIG_MAGIC_SYSRQ=y
CONFIG_MAGIC_SYSRQ_DEFAULT_ENABLE=0x1
CONFIG_DEBUG_KERNEL=y
#
# Memory Debugging
#
# CONFIG_PAGE_EXTENSION is not set
# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
CONFIG_HAVE_DEBUG_KMEMLEAK=y
# CONFIG_DEBUG_KMEMLEAK is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_VIRTUAL is not set
CONFIG_DEBUG_MEMORY_INIT=y
# CONFIG_DEBUG_PER_CPU_MAPS is not set
CONFIG_HAVE_DEBUG_STACKOVERFLOW=y
CONFIG_DEBUG_STACKOVERFLOW=y
CONFIG_HAVE_ARCH_KMEMCHECK=y
CONFIG_HAVE_ARCH_KASAN=y
# CONFIG_KASAN is not set
CONFIG_DEBUG_SHIRQ=y
#
# Debug Lockups and Hangs
#
CONFIG_LOCKUP_DETECTOR=y
CONFIG_HARDLOCKUP_DETECTOR=y
CONFIG_BOOTPARAM_HARDLOCKUP_PANIC=y
CONFIG_BOOTPARAM_HARDLOCKUP_PANIC_VALUE=1
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
CONFIG_DETECT_HUNG_TASK=y
CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=120
# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
CONFIG_PANIC_ON_OOPS=y
CONFIG_PANIC_ON_OOPS_VALUE=1
CONFIG_PANIC_TIMEOUT=0
CONFIG_SCHED_DEBUG=y
CONFIG_SCHED_INFO=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_SCHED_STACK_END_CHECK is not set
# CONFIG_DEBUG_TIMEKEEPING is not set
CONFIG_TIMER_STATS=y
#
# Lock Debugging (spinlocks, mutexes, etc...)
#
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
# CONFIG_DEBUG_WW_MUTEX_SLOWPATH is not set
# CONFIG_DEBUG_LOCK_ALLOC is not set
# CONFIG_PROVE_LOCKING is not set
# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_ATOMIC_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_LOCK_TORTURE_TEST is not set
CONFIG_STACKTRACE=y
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_LIST=y
# CONFIG_DEBUG_PI_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
# CONFIG_DEBUG_CREDENTIALS is not set
#
# RCU Debugging
#
# CONFIG_PROVE_RCU is not set
CONFIG_SPARSE_RCU_POINTER=y
# CONFIG_TORTURE_TEST is not set
# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_RCU_CPU_STALL_TIMEOUT=60
# CONFIG_RCU_TRACE is not set
# CONFIG_RCU_EQS_DEBUG is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_NOTIFIER_ERROR_INJECTION is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_ARCH_HAS_DEBUG_STRICT_USER_COPY_CHECKS=y
# CONFIG_DEBUG_STRICT_USER_COPY_CHECKS is not set
CONFIG_USER_STACKTRACE_SUPPORT=y
CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_FP_TEST=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_DYNAMIC_FTRACE_WITH_REGS=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_HAVE_FENTRY=y
CONFIG_HAVE_C_RECORDMCOUNT=y
CONFIG_TRACER_MAX_TRACE=y
CONFIG_TRACE_CLOCK=y
CONFIG_RING_BUFFER=y
CONFIG_EVENT_TRACING=y
CONFIG_CONTEXT_SWITCH_TRACER=y
CONFIG_RING_BUFFER_ALLOW_SWAP=y
CONFIG_TRACING=y
CONFIG_GENERIC_TRACER=y
CONFIG_TRACING_SUPPORT=y
CONFIG_FTRACE=y
CONFIG_FUNCTION_TRACER=y
CONFIG_FUNCTION_GRAPH_TRACER=y
# CONFIG_IRQSOFF_TRACER is not set
CONFIG_SCHED_TRACER=y
CONFIG_FTRACE_SYSCALLS=y
CONFIG_TRACER_SNAPSHOT=y
# CONFIG_TRACER_SNAPSHOT_PER_CPU_SWAP is not set
CONFIG_BRANCH_PROFILE_NONE=y
# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
# CONFIG_PROFILE_ALL_BRANCHES is not set
CONFIG_STACK_TRACER=y
CONFIG_BLK_DEV_IO_TRACE=y
CONFIG_KPROBE_EVENT=y
CONFIG_UPROBE_EVENT=y
CONFIG_PROBE_EVENTS=y
CONFIG_DYNAMIC_FTRACE=y
CONFIG_DYNAMIC_FTRACE_WITH_REGS=y
CONFIG_FUNCTION_PROFILER=y
CONFIG_FTRACE_MCOUNT_RECORD=y
# CONFIG_FTRACE_STARTUP_TEST is not set
# CONFIG_MMIOTRACE is not set
# CONFIG_TRACEPOINT_BENCHMARK is not set
CONFIG_RING_BUFFER_BENCHMARK=m
# CONFIG_RING_BUFFER_STARTUP_TEST is not set
# CONFIG_TRACE_ENUM_MAP_FILE is not set
#
# Runtime Testing
#
# CONFIG_LKDTM is not set
# CONFIG_TEST_LIST_SORT is not set
# CONFIG_KPROBES_SANITY_TEST is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_RBTREE_TEST is not set
# CONFIG_INTERVAL_TREE_TEST is not set
# CONFIG_PERCPU_TEST is not set
CONFIG_ATOMIC64_SELFTEST=y
CONFIG_ASYNC_RAID6_TEST=m
# CONFIG_TEST_HEXDUMP is not set
# CONFIG_TEST_STRING_HELPERS is not set
CONFIG_TEST_KSTRTOX=y
# CONFIG_TEST_PRINTF is not set
# CONFIG_TEST_RHASHTABLE is not set
CONFIG_PROVIDE_OHCI1394_DMA_INIT=y
CONFIG_BUILD_DOCSRC=y
# CONFIG_DMA_API_DEBUG is not set
# CONFIG_TEST_LKM is not set
# CONFIG_TEST_USER_COPY is not set
# CONFIG_TEST_BPF is not set
# CONFIG_TEST_FIRMWARE is not set
# CONFIG_TEST_UDELAY is not set
# CONFIG_MEMTEST is not set
# CONFIG_TEST_STATIC_KEYS is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_KGDB=y
CONFIG_KGDB_SERIAL_CONSOLE=y
CONFIG_KGDB_TESTS=y
# CONFIG_KGDB_TESTS_ON_BOOT is not set
CONFIG_KGDB_LOW_LEVEL_TRAP=y
CONFIG_KGDB_KDB=y
CONFIG_KDB_DEFAULT_ENABLE=0x1
CONFIG_KDB_KEYBOARD=y
CONFIG_KDB_CONTINUE_CATASTROPHIC=0
CONFIG_STRICT_DEVMEM=y
# CONFIG_X86_VERBOSE_BOOTUP is not set
CONFIG_EARLY_PRINTK=y
CONFIG_EARLY_PRINTK_DBGP=y
CONFIG_EARLY_PRINTK_EFI=y
# CONFIG_X86_PTDUMP_CORE is not set
# CONFIG_X86_PTDUMP is not set
# CONFIG_EFI_PGT_DUMP is not set
# CONFIG_DEBUG_RODATA is not set
CONFIG_DEBUG_SET_MODULE_RONX=y
CONFIG_DEBUG_NX_TEST=m
CONFIG_DOUBLEFAULT=y
# CONFIG_DEBUG_TLBFLUSH is not set
# CONFIG_IOMMU_DEBUG is not set
# CONFIG_IOMMU_STRESS is not set
CONFIG_HAVE_MMIOTRACE_SUPPORT=y
CONFIG_X86_DECODER_SELFTEST=y
CONFIG_IO_DELAY_TYPE_0X80=0
CONFIG_IO_DELAY_TYPE_0XED=1
CONFIG_IO_DELAY_TYPE_UDELAY=2
CONFIG_IO_DELAY_TYPE_NONE=3
CONFIG_IO_DELAY_0X80=y
# CONFIG_IO_DELAY_0XED is not set
# CONFIG_IO_DELAY_UDELAY is not set
# CONFIG_IO_DELAY_NONE is not set
CONFIG_DEFAULT_IO_DELAY_TYPE=0
CONFIG_DEBUG_BOOT_PARAMS=y
# CONFIG_CPA_DEBUG is not set
CONFIG_OPTIMIZE_INLINING=y
# CONFIG_DEBUG_ENTRY is not set
# CONFIG_DEBUG_NMI_SELFTEST is not set
# CONFIG_X86_DEBUG_STATIC_CPU_HAS is not set
CONFIG_X86_DEBUG_FPU=y
# CONFIG_PUNIT_ATOM_DEBUG is not set
#
# Security options
#
CONFIG_KEYS=y
CONFIG_PERSISTENT_KEYRINGS=y
CONFIG_BIG_KEYS=y
CONFIG_TRUSTED_KEYS=y
CONFIG_ENCRYPTED_KEYS=y
# CONFIG_SECURITY_DMESG_RESTRICT is not set
CONFIG_SECURITY=y
CONFIG_SECURITYFS=y
CONFIG_SECURITY_NETWORK=y
CONFIG_SECURITY_NETWORK_XFRM=y
# CONFIG_SECURITY_PATH is not set
CONFIG_INTEL_TXT=y
CONFIG_LSM_MMAP_MIN_ADDR=65535
CONFIG_SECURITY_SELINUX=y
CONFIG_SECURITY_SELINUX_BOOTPARAM=y
CONFIG_SECURITY_SELINUX_BOOTPARAM_VALUE=1
CONFIG_SECURITY_SELINUX_DISABLE=y
CONFIG_SECURITY_SELINUX_DEVELOP=y
CONFIG_SECURITY_SELINUX_AVC_STATS=y
CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=1
# CONFIG_SECURITY_SELINUX_POLICYDB_VERSION_MAX is not set
# CONFIG_SECURITY_SMACK is not set
# CONFIG_SECURITY_TOMOYO is not set
# CONFIG_SECURITY_APPARMOR is not set
# CONFIG_SECURITY_YAMA is not set
CONFIG_INTEGRITY=y
CONFIG_INTEGRITY_SIGNATURE=y
CONFIG_INTEGRITY_ASYMMETRIC_KEYS=y
CONFIG_INTEGRITY_AUDIT=y
CONFIG_IMA=y
CONFIG_IMA_MEASURE_PCR_IDX=10
CONFIG_IMA_LSM_RULES=y
# CONFIG_IMA_TEMPLATE is not set
CONFIG_IMA_NG_TEMPLATE=y
# CONFIG_IMA_SIG_TEMPLATE is not set
CONFIG_IMA_DEFAULT_TEMPLATE="ima-ng"
CONFIG_IMA_DEFAULT_HASH_SHA1=y
# CONFIG_IMA_DEFAULT_HASH_SHA256 is not set
# CONFIG_IMA_DEFAULT_HASH_SHA512 is not set
# CONFIG_IMA_DEFAULT_HASH_WP512 is not set
CONFIG_IMA_DEFAULT_HASH="sha1"
CONFIG_IMA_APPRAISE=y
CONFIG_IMA_TRUSTED_KEYRING=y
# CONFIG_IMA_LOAD_X509 is not set
CONFIG_EVM=y
CONFIG_EVM_ATTR_FSUUID=y
CONFIG_DEFAULT_SECURITY_SELINUX=y
# CONFIG_DEFAULT_SECURITY_DAC is not set
CONFIG_DEFAULT_SECURITY="selinux"
CONFIG_XOR_BLOCKS=m
CONFIG_ASYNC_CORE=m
CONFIG_ASYNC_MEMCPY=m
CONFIG_ASYNC_XOR=m
CONFIG_ASYNC_PQ=m
CONFIG_ASYNC_RAID6_RECOV=m
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
CONFIG_CRYPTO_FIPS=y
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_RNG_DEFAULT=y
CONFIG_CRYPTO_PCOMP=m
CONFIG_CRYPTO_PCOMP2=y
CONFIG_CRYPTO_AKCIPHER2=y
CONFIG_CRYPTO_AKCIPHER=m
# CONFIG_CRYPTO_RSA is not set
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
CONFIG_CRYPTO_USER=m
# CONFIG_CRYPTO_MANAGER_DISABLE_TESTS is not set
CONFIG_CRYPTO_GF128MUL=m
CONFIG_CRYPTO_NULL=y
CONFIG_CRYPTO_NULL2=y
CONFIG_CRYPTO_PCRYPT=m
CONFIG_CRYPTO_WORKQUEUE=y
CONFIG_CRYPTO_CRYPTD=m
CONFIG_CRYPTO_MCRYPTD=m
CONFIG_CRYPTO_AUTHENC=m
CONFIG_CRYPTO_TEST=m
CONFIG_CRYPTO_ABLK_HELPER=m
CONFIG_CRYPTO_GLUE_HELPER_X86=m
#
# Authenticated Encryption with Associated Data
#
CONFIG_CRYPTO_CCM=m
CONFIG_CRYPTO_GCM=m
# CONFIG_CRYPTO_CHACHA20POLY1305 is not set
CONFIG_CRYPTO_SEQIV=y
CONFIG_CRYPTO_ECHAINIV=m
#
# Block modes
#
CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_CTR=y
CONFIG_CRYPTO_CTS=m
CONFIG_CRYPTO_ECB=y
CONFIG_CRYPTO_LRW=m
CONFIG_CRYPTO_PCBC=m
CONFIG_CRYPTO_XTS=m
# CONFIG_CRYPTO_KEYWRAP is not set
#
# Hash modes
#
CONFIG_CRYPTO_CMAC=m
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_XCBC=m
CONFIG_CRYPTO_VMAC=m
#
# Digest
#
CONFIG_CRYPTO_CRC32C=y
CONFIG_CRYPTO_CRC32C_INTEL=m
CONFIG_CRYPTO_CRC32=m
CONFIG_CRYPTO_CRC32_PCLMUL=m
CONFIG_CRYPTO_CRCT10DIF=y
CONFIG_CRYPTO_CRCT10DIF_PCLMUL=m
CONFIG_CRYPTO_GHASH=m
# CONFIG_CRYPTO_POLY1305 is not set
# CONFIG_CRYPTO_POLY1305_X86_64 is not set
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_RMD128=m
CONFIG_CRYPTO_RMD160=m
CONFIG_CRYPTO_RMD256=m
CONFIG_CRYPTO_RMD320=m
CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_SHA1_SSSE3=y
CONFIG_CRYPTO_SHA256_SSSE3=y
CONFIG_CRYPTO_SHA512_SSSE3=m
CONFIG_CRYPTO_SHA1_MB=m
CONFIG_CRYPTO_SHA256=y
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_TGR192=m
CONFIG_CRYPTO_WP512=m
CONFIG_CRYPTO_GHASH_CLMUL_NI_INTEL=m
#
# Ciphers
#
CONFIG_CRYPTO_AES=y
CONFIG_CRYPTO_AES_X86_64=y
CONFIG_CRYPTO_AES_NI_INTEL=m
CONFIG_CRYPTO_ANUBIS=m
CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_BLOWFISH_COMMON=m
CONFIG_CRYPTO_BLOWFISH_X86_64=m
CONFIG_CRYPTO_CAMELLIA=m
CONFIG_CRYPTO_CAMELLIA_X86_64=m
CONFIG_CRYPTO_CAMELLIA_AESNI_AVX_X86_64=m
CONFIG_CRYPTO_CAMELLIA_AESNI_AVX2_X86_64=m
CONFIG_CRYPTO_CAST_COMMON=m
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST5_AVX_X86_64=m
CONFIG_CRYPTO_CAST6=m
CONFIG_CRYPTO_CAST6_AVX_X86_64=m
CONFIG_CRYPTO_DES=m
# CONFIG_CRYPTO_DES3_EDE_X86_64 is not set
CONFIG_CRYPTO_FCRYPT=m
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_SALSA20=m
CONFIG_CRYPTO_SALSA20_X86_64=m
# CONFIG_CRYPTO_CHACHA20 is not set
# CONFIG_CRYPTO_CHACHA20_X86_64 is not set
CONFIG_CRYPTO_SEED=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_SERPENT_SSE2_X86_64=m
CONFIG_CRYPTO_SERPENT_AVX_X86_64=m
CONFIG_CRYPTO_SERPENT_AVX2_X86_64=m
CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_TWOFISH_COMMON=m
CONFIG_CRYPTO_TWOFISH_X86_64=m
CONFIG_CRYPTO_TWOFISH_X86_64_3WAY=m
CONFIG_CRYPTO_TWOFISH_AVX_X86_64=m
#
# Compression
#
CONFIG_CRYPTO_DEFLATE=m
CONFIG_CRYPTO_ZLIB=m
CONFIG_CRYPTO_LZO=y
# CONFIG_CRYPTO_842 is not set
# CONFIG_CRYPTO_LZ4 is not set
# CONFIG_CRYPTO_LZ4HC is not set
#
# Random Number Generation
#
CONFIG_CRYPTO_ANSI_CPRNG=m
CONFIG_CRYPTO_DRBG_MENU=y
CONFIG_CRYPTO_DRBG_HMAC=y
CONFIG_CRYPTO_DRBG_HASH=y
CONFIG_CRYPTO_DRBG_CTR=y
CONFIG_CRYPTO_DRBG=y
CONFIG_CRYPTO_JITTERENTROPY=y
CONFIG_CRYPTO_USER_API=y
CONFIG_CRYPTO_USER_API_HASH=y
CONFIG_CRYPTO_USER_API_SKCIPHER=y
# CONFIG_CRYPTO_USER_API_RNG is not set
# CONFIG_CRYPTO_USER_API_AEAD is not set
CONFIG_CRYPTO_HASH_INFO=y
CONFIG_CRYPTO_HW=y
CONFIG_CRYPTO_DEV_PADLOCK=m
CONFIG_CRYPTO_DEV_PADLOCK_AES=m
CONFIG_CRYPTO_DEV_PADLOCK_SHA=m
# CONFIG_CRYPTO_DEV_CCP is not set
CONFIG_CRYPTO_DEV_QAT=m
CONFIG_CRYPTO_DEV_QAT_DH895xCC=m
# CONFIG_CRYPTO_DEV_QAT_DH895xCCVF is not set
CONFIG_ASYMMETRIC_KEY_TYPE=y
CONFIG_ASYMMETRIC_PUBLIC_KEY_SUBTYPE=y
CONFIG_PUBLIC_KEY_ALGO_RSA=y
CONFIG_X509_CERTIFICATE_PARSER=y
CONFIG_PKCS7_MESSAGE_PARSER=y
# CONFIG_PKCS7_TEST_KEY is not set
CONFIG_SIGNED_PE_FILE_VERIFICATION=y
#
# Certificates for signature checking
#
CONFIG_MODULE_SIG_KEY="certs/signing_key.pem"
CONFIG_SYSTEM_TRUSTED_KEYRING=y
CONFIG_SYSTEM_TRUSTED_KEYS=""
CONFIG_HAVE_KVM=y
CONFIG_HAVE_KVM_IRQCHIP=y
CONFIG_HAVE_KVM_IRQFD=y
CONFIG_HAVE_KVM_IRQ_ROUTING=y
CONFIG_HAVE_KVM_EVENTFD=y
CONFIG_KVM_APIC_ARCHITECTURE=y
CONFIG_KVM_MMIO=y
CONFIG_KVM_ASYNC_PF=y
CONFIG_HAVE_KVM_MSI=y
CONFIG_HAVE_KVM_CPU_RELAX_INTERCEPT=y
CONFIG_KVM_VFIO=y
CONFIG_KVM_GENERIC_DIRTYLOG_READ_PROTECT=y
CONFIG_KVM_COMPAT=y
CONFIG_HAVE_KVM_IRQ_BYPASS=y
CONFIG_VIRTUALIZATION=y
CONFIG_KVM=m
CONFIG_KVM_INTEL=m
CONFIG_KVM_AMD=m
CONFIG_KVM_MMU_AUDIT=y
# CONFIG_KVM_DEVICE_ASSIGNMENT is not set
CONFIG_BINARY_PRINTF=y
#
# Library routines
#
CONFIG_RAID6_PQ=m
CONFIG_BITREVERSE=y
# CONFIG_HAVE_ARCH_BITREVERSE is not set
CONFIG_RATIONAL=y
CONFIG_GENERIC_STRNCPY_FROM_USER=y
CONFIG_GENERIC_STRNLEN_USER=y
CONFIG_GENERIC_NET_UTILS=y
CONFIG_GENERIC_FIND_FIRST_BIT=y
CONFIG_GENERIC_PCI_IOMAP=y
CONFIG_GENERIC_IOMAP=y
CONFIG_GENERIC_IO=y
CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y
CONFIG_ARCH_HAS_FAST_MULTIPLIER=y
CONFIG_CRC_CCITT=m
CONFIG_CRC16=y
CONFIG_CRC_T10DIF=y
CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
# CONFIG_CRC32_SELFTEST is not set
CONFIG_CRC32_SLICEBY8=y
# CONFIG_CRC32_SLICEBY4 is not set
# CONFIG_CRC32_SARWATE is not set
# CONFIG_CRC32_BIT is not set
# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=m
CONFIG_CRC8=m
# CONFIG_AUDIT_ARCH_COMPAT_GENERIC is not set
# CONFIG_RANDOM32_SELFTEST is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_LZO_COMPRESS=y
CONFIG_LZO_DECOMPRESS=y
CONFIG_LZ4_DECOMPRESS=y
CONFIG_XZ_DEC=y
CONFIG_XZ_DEC_X86=y
CONFIG_XZ_DEC_POWERPC=y
CONFIG_XZ_DEC_IA64=y
CONFIG_XZ_DEC_ARM=y
CONFIG_XZ_DEC_ARMTHUMB=y
CONFIG_XZ_DEC_SPARC=y
CONFIG_XZ_DEC_BCJ=y
# CONFIG_XZ_DEC_TEST is not set
CONFIG_DECOMPRESS_GZIP=y
CONFIG_DECOMPRESS_BZIP2=y
CONFIG_DECOMPRESS_LZMA=y
CONFIG_DECOMPRESS_XZ=y
CONFIG_DECOMPRESS_LZO=y
CONFIG_DECOMPRESS_LZ4=y
CONFIG_GENERIC_ALLOCATOR=y
CONFIG_REED_SOLOMON=m
CONFIG_REED_SOLOMON_ENC8=y
CONFIG_REED_SOLOMON_DEC8=y
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=m
CONFIG_TEXTSEARCH_BM=m
CONFIG_TEXTSEARCH_FSM=m
CONFIG_INTERVAL_TREE=y
CONFIG_ASSOCIATIVE_ARRAY=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT_MAP=y
CONFIG_HAS_DMA=y
CONFIG_CHECK_SIGNATURE=y
CONFIG_CPUMASK_OFFSTACK=y
CONFIG_CPU_RMAP=y
CONFIG_DQL=y
CONFIG_GLOB=y
# CONFIG_GLOB_SELFTEST is not set
CONFIG_NLATTR=y
CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y
CONFIG_CLZ_TAB=y
CONFIG_CORDIC=m
# CONFIG_DDR is not set
CONFIG_MPILIB=y
CONFIG_SIGNATURE=y
CONFIG_OID_REGISTRY=y
CONFIG_UCS2_STRING=y
CONFIG_FONT_SUPPORT=y
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
# CONFIG_SG_SPLIT is not set
CONFIG_ARCH_HAS_SG_CHAIN=y
CONFIG_ARCH_HAS_PMEM_API=y
CONFIG_ARCH_HAS_MMIO_FLUSH=y
[-- Attachment #3: Type: text/plain, Size: 4 bytes --]
>
^ permalink raw reply [flat|nested] 46+ messages in thread
* Re: [Bug 111441] New: iscsi fails to attach to targets
2016-01-29 8:01 ` Michael Christie
@ 2016-01-29 8:25 ` Mike Christie
2016-01-29 12:04 ` Serguei Bezverkhi (sbezverk)
1 sibling, 0 replies; 46+ messages in thread
From: Mike Christie @ 2016-01-29 8:25 UTC (permalink / raw)
To: Serguei Bezverkhi (sbezverk)
Cc: bugzilla-daemon@bugzilla.kernel.org, linux-scsi@vger.kernel.org
[-- Attachment #1: Type: text/plain, Size: 180 bytes --]
On 01/29/2016 02:01 AM, Michael Christie wrote:
> Can you send me your lio config?
>
Not sure what I was thinking. Don't send me anything. Could you just try
the attached patch?
[-- Attachment #2: fix-add-dev-alua-attach-fail-regression.patch --]
[-- Type: text/x-patch, Size: 389 bytes --]
diff --git a/drivers/scsi/scsi_sysfs.c b/drivers/scsi/scsi_sysfs.c
index 21930c9..4269cbc 100644
--- a/drivers/scsi/scsi_sysfs.c
+++ b/drivers/scsi/scsi_sysfs.c
@@ -1061,6 +1061,7 @@ int scsi_sysfs_add_sdev(struct scsi_device *sdev)
if (error) {
sdev_printk(KERN_INFO, sdev,
"failed to add device handler: %d\n", error);
+ device_del(&sdev->sdev_gendev);
return error;
}
^ permalink raw reply related [flat|nested] 46+ messages in thread* RE: [Bug 111441] New: iscsi fails to attach to targets
2016-01-29 8:01 ` Michael Christie
2016-01-29 8:25 ` Mike Christie
@ 2016-01-29 12:04 ` Serguei Bezverkhi (sbezverk)
2016-01-29 19:08 ` Michael Christie
1 sibling, 1 reply; 46+ messages in thread
From: Serguei Bezverkhi (sbezverk) @ 2016-01-29 12:04 UTC (permalink / raw)
To: Michael Christie
Cc: bugzilla-daemon@bugzilla.kernel.org, linux-scsi@vger.kernel.org
Actually this server uses both cases: Local taregts (since it is OpenStack server) and remote targets as it tries to mount 4 remotefile systems.
You are correct, I always use the same box I just change the kernel it is using to boot. No other changes to the environment. I do not mind to load a test kernel without that suspected patch, just get me the RPM.
As you can see the first type of traceback happens when the server tries to attach to remote targets, the second type of traceback happens when I try to start OpenStack instance with local LVM volume which is represented as a local iscsi target. Please see below.
[Remote taregt case]
targetcli
targetcli shell version 2.1.fb41
Copyright 2011-2013 by Datera, Inc and others.
For help on commands, type 'help'.
/> ls
o- / ......................................................................................................................... [...]
o- backstores .............................................................................................................. [...]
| o- block .................................................................................................. [Storage Objects: 0]
| o- fileio ................................................................................................. [Storage Objects: 0]
| o- pscsi .................................................................................................. [Storage Objects: 0]
| o- ramdisk ................................................................................................ [Storage Objects: 0]
o- iscsi ............................................................................................................ [Targets: 0]
o- loopback ......................................................................................................... [Targets: 0]
/> exit
[ 25.670239] scsi host3: iSCSI Initiator over TCP/IP
[ 25.682122] scsi host4: iSCSI Initiator over TCP/IP
[ 25.692401] scsi host5: iSCSI Initiator over TCP/IP
[ 25.693530] scsi 3:0:0:2: Direct-Access LIO-ORG san-disk-2 4.0 PQ: 0 ANSI: 5 < ------------------------ Remote target
[ 25.693936] sd 3:0:0:2: alua: supports implicit and explicit TPGS
[ 25.694078] sd 3:0:0:2: alua: No target port descriptors found
[ 25.694080] sd 3:0:0:2: alua: Attach failed (-22)
[ 25.694081] sd 3:0:0:2: failed to add device handler: -22
[ 25.694121] sd 3:0:0:2: [sdc] 20507809792 512-byte logical blocks: (10.4 TB/9.54 TiB)
[ 25.694127] sd 3:0:0:2: [sdc] Write Protect is off
[ 25.694129] sd 3:0:0:2: [sdc] Mode Sense: 00 00 00 00
[ 25.694131] sd 3:0:0:2: [sdc] Asking for cache data failed
[ 25.694132] sd 3:0:0:2: [sdc] Assuming drive cache: write through
[ 25.695112] ------------[ cut here ]------------
[ 25.695119] WARNING: CPU: 12 PID: 841 at block/genhd.c:626 add_disk+0x443/0x4a0()
[ 25.695120] Modules linked in: iscsi_tcp libiscsi_tcp 8021q garp mrp rpcrdma ib_isert iscsi_target_mod bonding ib_iser libiscsi scsi_transport_iscsi openvswitch ib_srpt target_core_mod nf_defrag_ipv6 ib_srp scsi_transport_srp ib_ipoib rdma_ucm ib_ucm ib_uverbs ib_umad rdma_cm ib_cm iw_cm xt_comment xt_multiport ib_sa iptable_filter ib_mad iptable_nat nf_conntrack_ipv4 usnic_verbs nf_defrag_ipv4 nf_nat_ipv4 nf_nat nf_conntrack ib_core ib_addr iptable_mangle x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel kvm irqbypass crct10dif_pclmul crc32_pclmul aesni_intel nfsd lrw gf128mul glue_helper ablk_helper ses cryptd enclosure ipmi_devintf sg sb_edac iTCO_wdt shpchp edac_core iTCO_vendor_support ipmi_si pcspkr lpc_ich ipmi_msghandler mfd_core auth_rpcgss acpi_power_meter wmi nfs_acl l
ockd br_netfilter
[ 25.695161] grace sunrpc bridge stp llc dm_multipath ip_tables xfs libcrc32c sd_mod mgag200 drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops ttm drm ixgbe(O) fnic i40e libfcoe igb crc32c_intel megaraid_sas enic libfc vxlan ip6_udp_tunnel udp_tunnel ptp scsi_transport_fc i2c_algo_bit i2c_core pps_core dca dm_mirror dm_region_hash dm_log dm_mod
[ 25.695183] CPU: 12 PID: 841 Comm: kworker/u82:2 Tainted: G O 4.4.0 #1
[ 25.695185] Hardware name: Cisco Systems Inc UCSC-C240-M3S/UCSC-C240-M3S, BIOS C240M3.2.0.8.0.071620152208 07/16/2015
[ 25.695189] Workqueue: events_unbound async_run_entry_fn
[ 25.695191] 0000000000000000 000000004b5682c8 ffff885f9b887cf8 ffffffff81329090
[ 25.695193] 0000000000000000 ffff885f9b887d30 ffffffff810862c6 ffff885fa5ef2000
[ 25.695194] ffff885fa5ef2080 ffff885f9d2fe1a0 ffff885fa5ef200c ffff885f86b10000
[ 25.695196] Call Trace:
[ 25.695204] [<ffffffff81329090>] dump_stack+0x44/0x64
[ 25.695207] [<ffffffff810862c6>] warn_slowpath_common+0x86/0xc0
[ 25.695209] [<ffffffff8108640a>] warn_slowpath_null+0x1a/0x20
[ 25.695210] [<ffffffff8130ef23>] add_disk+0x443/0x4a0
[ 25.695216] [<ffffffffa008ba35>] sd_probe_async+0x115/0x1d0 [sd_mod]
[ 25.695217] [<ffffffff810a70fa>] async_run_entry_fn+0x4a/0x140
[ 25.695220] [<ffffffff8109e09c>] process_one_work+0x14c/0x3c0
[ 25.695221] [<ffffffff8109e8d4>] worker_thread+0x114/0x470
[ 25.695226] [<ffffffff816905ba>] ? __schedule+0x2aa/0x700
[ 25.695237] [<ffffffff8109e7c0>] ? rescuer_thread+0x310/0x310
[ 25.695241] [<ffffffff810a43d8>] kthread+0xd8/0xf0
[ 25.695243] [<ffffffff810a4300>] ? kthread_park+0x60/0x60
[ 25.695245] [<ffffffff8169490f>] ret_from_fork+0x3f/0x70
[ 25.695247] [<ffffffff810a4300>] ? kthread_park+0x60/0x60
[ 25.695248] ---[ end trace bcfb1475313b5f60 ]---
[ 25.695262] sd 3:0:0:2: [sdc] Attached SCSI disk
[ 25.703053] scsi host6: iSCSI Initiator over TCP/IP
[ 25.704370] scsi 3:0:0:0: Unexpected response from lun 2 while scanning, scan aborted
[local target case]
/> ls
o- / ......................................................................................................................... [...]
o- backstores .............................................................................................................. [...]
| o- block .................................................................................................. [Storage Objects: 1]
| | o- iqn.2010-10.org.openstack:volume-07e39fbc-4767-4455-bb96-c6b53be6a10c [/dev/cinder-volumes-local/volume-07e39fbc-4767-4455-bb96-c6b53be6a10c (55.0GiB) write-thru activated]
| o- fileio ................................................................................................. [Storage Objects: 0]
| o- pscsi .................................................................................................. [Storage Objects: 0]
| o- ramdisk ................................................................................................ [Storage Objects: 0]
o- iscsi ............................................................................................................ [Targets: 1]
| o- iqn.2010-10.org.openstack:volume-07e39fbc-4767-4455-bb96-c6b53be6a10c ............................................. [TPGs: 1]
| o- tpg1 .......................................................................................... [no-gen-acls, auth per-acl]
| o- acls .......................................................................................................... [ACLs: 1]
| | o- iqn.1994-05.com.redhat:cf7f1fafca4b ...................................................... [1-way auth, Mapped LUNs: 1]
| | o- mapped_lun0 ................. [lun0 block/iqn.2010-10.org.openstack:volume-07e39fbc-4767-4455-bb96-c6b53be6a10c (rw)]
| o- luns .......................................................................................................... [LUNs: 1]
| | o- lun0 [block/iqn.2010-10.org.openstack:volume-07e39fbc-4767-4455-bb96-c6b53be6a10c (/dev/cinder-volumes-local/volume-07e39fbc-4767-4455-bb96-c6b53be6a10c)]
| o- portals .................................................................................................... [Portals: 1]
| o- 192.168.80.23:3260 ............................................................................................... [OK]
o- loopback ......................................................................................................... [Targets: 0]
/>
[root@sbezverk-osp-3 ~(keystone_admin)]# lvs
LV VG Attr LSize Pool Origin Data% Meta% Move Log Cpy%Sync Convert
swift-volume cinder-volumes-local -wi-ao---- 200.00g
volume-07e39fbc-4767-4455-bb96-c6b53be6a10c cinder-volumes-local -wi-a----- 55.00g < ----- Local volume and a local target for OpenStack instance
volume-c69da50c-c66a-4f94-9a40-b4f7d7f28eae cinder-volumes-local -wi-a----- 1.00g < ----- Local volume and a local target for OpenStack instance
Here are tracebacks when OpenStack tries to attach to these two local targets:
[ 1019.953129] Unable to load target_core_user
[ 1033.758866] scsi host7: iSCSI Initiator over TCP/IP
[ 1033.776279] scsi 7:0:0:0: Direct-Access LIO-ORG IBLOCK 4.0 PQ: 0 ANSI: 5
[ 1033.776658] sd 7:0:0:0: alua: supports implicit and explicit TPGS
[ 1033.776721] TARGET_CORE[iSCSI]: Expected Transfer Length: 264 does not match SCSI CDB Length: 8 for SAM Opcode: 0x12
[ 1033.776763] sd 7:0:0:0: alua: No target port descriptors found
[ 1033.776765] sd 7:0:0:0: alua: Attach failed (-22)
[ 1033.776782] sd 7:0:0:0: failed to add device handler: -22
[ 1033.776786] sd 7:0:0:0: [sdg] 115343360 512-byte logical blocks: (59.0 GB/55.0 GiB) < ----------------------------------- first 55G volume
[ 1033.776791] sd 7:0:0:0: [sdg] Write Protect is off
[ 1033.776792] sd 7:0:0:0: [sdg] Mode Sense: 00 00 00 00
[ 1033.776795] sd 7:0:0:0: [sdg] Asking for cache data failed
[ 1033.776820] sd 7:0:0:0: [sdg] Assuming drive cache: write through
[ 1033.776960] ------------[ cut here ]------------
[ 1033.776965] WARNING: CPU: 6 PID: 7 at lib/kobject.c:244 kobject_add_internal+0x10d/0x320()
[ 1033.776966] kobject_add_internal failed for block (error: -2 parent: 7:0:0:0)
[ 1033.776967] Modules linked in: target_core_pscsi target_core_file target_core_iblock xt_REDIRECT nf_nat_redirect xt_nat xt_mark xt_CHECKSUM nf_conntrack_ipv6 xt_mac xt_physdev xt_set xt_conntrack iptable_raw ip_set_hash_net ip_set nfnetlink veth ebtable_filter ebtables ip6table_filter ip6_tables iscsi_tcp libiscsi_tcp 8021q garp mrp rpcrdma ib_isert iscsi_target_mod bonding ib_iser libiscsi scsi_transport_iscsi openvswitch ib_srpt target_core_mod nf_defrag_ipv6 ib_srp scsi_transport_srp ib_ipoib rdma_ucm ib_ucm ib_uverbs ib_umad rdma_cm ib_cm iw_cm xt_comment xt_multiport ib_sa iptable_filter ib_mad iptable_nat nf_conntrack_ipv4 usnic_verbs nf_defrag_ipv4 nf_nat_ipv4 nf_nat nf_conntrack ib_core ib_addr iptable_mangle x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel kvm irqbypass
crct10dif_pclmul
[ 1033.777008] crc32_pclmul aesni_intel nfsd lrw gf128mul glue_helper ablk_helper ses cryptd enclosure ipmi_devintf sg sb_edac iTCO_wdt shpchp edac_core iTCO_vendor_support ipmi_si pcspkr lpc_ich ipmi_msghandler mfd_core auth_rpcgss acpi_power_meter wmi nfs_acl lockd br_netfilter grace sunrpc bridge stp llc dm_multipath ip_tables xfs libcrc32c sd_mod mgag200 drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops ttm drm ixgbe(O) fnic i40e libfcoe igb crc32c_intel megaraid_sas enic libfc vxlan ip6_udp_tunnel udp_tunnel ptp scsi_transport_fc i2c_algo_bit i2c_core pps_core dca dm_mirror dm_region_hash dm_log dm_mod
[ 1033.777040] CPU: 6 PID: 7 Comm: kworker/u81:0 Tainted: G W O 4.4.0 #1
[ 1033.777041] Hardware name: Cisco Systems Inc UCSC-C240-M3S/UCSC-C240-M3S, BIOS C240M3.2.0.8.0.071620152208 07/16/2015
[ 1033.777045] Workqueue: events_unbound async_run_entry_fn
[ 1033.777046] 0000000000000000 00000000f9d0f617 ffff882fa6bcbb60 ffffffff81329090
[ 1033.777048] ffff882fa6bcbba8 ffff882fa6bcbb98 ffffffff810862c6 ffff885d991d0360
[ 1033.777050] ffff885fa5f5c978 00000000fffffffe ffff885fa5f5c978 ffff882e7b520070
[ 1033.777052] Call Trace:
[ 1033.777057] [<ffffffff81329090>] dump_stack+0x44/0x64
[ 1033.777060] [<ffffffff810862c6>] warn_slowpath_common+0x86/0xc0
[ 1033.777061] [<ffffffff8108635c>] warn_slowpath_fmt+0x5c/0x80
[ 1033.777063] [<ffffffff8132bebd>] kobject_add_internal+0x10d/0x320
[ 1033.777067] [<ffffffff811a34d2>] ? kfree_const+0x22/0x30
[ 1033.777068] [<ffffffff8132c305>] kobject_add+0x75/0xd0
[ 1033.777073] [<ffffffff811e2a8e>] ? kmem_cache_alloc_trace+0x1be/0x1e0
[ 1033.777076] [<ffffffff81451f62>] ? get_device_parent+0x122/0x1d0
[ 1033.777078] [<ffffffff81451fa8>] get_device_parent+0x168/0x1d0
[ 1033.777079] [<ffffffff81452557>] device_add+0xf7/0x610
[ 1033.777081] [<ffffffff8130ecad>] add_disk+0x1cd/0x4a0
[ 1033.777085] [<ffffffff81460ec5>] ? update_autosuspend+0x55/0x60
[ 1033.777088] [<ffffffff81460f84>] ? __pm_runtime_use_autosuspend+0x54/0x70
[ 1033.777092] [<ffffffffa008ba35>] sd_probe_async+0x115/0x1d0 [sd_mod]
[ 1033.777093] [<ffffffff810a70fa>] async_run_entry_fn+0x4a/0x140
[ 1033.777096] [<ffffffff8109e09c>] process_one_work+0x14c/0x3c0
[ 1033.777097] [<ffffffff8109e8d4>] worker_thread+0x114/0x470
[ 1033.777098] [<ffffffff8109e7c0>] ? rescuer_thread+0x310/0x310
[ 1033.777101] [<ffffffff810a43d8>] kthread+0xd8/0xf0
[ 1033.777103] [<ffffffff810a4300>] ? kthread_park+0x60/0x60
[ 1033.777105] [<ffffffff8169490f>] ret_from_fork+0x3f/0x70
[ 1033.777107] [<ffffffff810a4300>] ? kthread_park+0x60/0x60
[ 1033.777108] ---[ end trace bcfb1475313b5f61 ]---
[ 1033.777855] sd 7:0:0:0: [sdg] Attached SCSI disk
[ 1033.911169] scsi 7:0:0:0: Direct-Access LIO-ORG IBLOCK 4.0 PQ: 0 ANSI: 5
[ 1033.911465] ------------[ cut here ]------------
[ 1033.911470] WARNING: CPU: 22 PID: 10565 at fs/sysfs/dir.c:31 sysfs_warn_dup+0x64/0x80()
[ 1033.911471] sysfs: cannot create duplicate filename '/bus/scsi/devices/7:0:0:0'
[ 1033.911472] Modules linked in: target_core_pscsi target_core_file target_core_iblock xt_REDIRECT nf_nat_redirect xt_nat xt_mark xt_CHECKSUM nf_conntrack_ipv6 xt_mac xt_physdev xt_set xt_conntrack iptable_raw ip_set_hash_net ip_set nfnetlink veth ebtable_filter ebtables ip6table_filter ip6_tables iscsi_tcp libiscsi_tcp 8021q garp mrp rpcrdma ib_isert iscsi_target_mod bonding ib_iser libiscsi scsi_transport_iscsi openvswitch ib_srpt target_core_mod nf_defrag_ipv6 ib_srp scsi_transport_srp ib_ipoib rdma_ucm ib_ucm ib_uverbs ib_umad rdma_cm ib_cm iw_cm xt_comment xt_multiport ib_sa iptable_filter ib_mad iptable_nat nf_conntrack_ipv4 usnic_verbs nf_defrag_ipv4 nf_nat_ipv4 nf_nat nf_conntrack ib_core ib_addr iptable_mangle x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel kvm irqbypass
crct10dif_pclmul
[ 1033.911502] crc32_pclmul aesni_intel nfsd lrw gf128mul glue_helper ablk_helper ses cryptd enclosure ipmi_devintf sg sb_edac iTCO_wdt shpchp edac_core iTCO_vendor_support ipmi_si pcspkr lpc_ich ipmi_msghandler mfd_core auth_rpcgss acpi_power_meter wmi nfs_acl lockd br_netfilter grace sunrpc bridge stp llc dm_multipath ip_tables xfs libcrc32c sd_mod mgag200 drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops ttm drm ixgbe(O) fnic i40e libfcoe igb crc32c_intel megaraid_sas enic libfc vxlan ip6_udp_tunnel udp_tunnel ptp scsi_transport_fc i2c_algo_bit i2c_core pps_core dca dm_mirror dm_region_hash dm_log dm_mod
[ 1033.911533] CPU: 22 PID: 10565 Comm: iscsiadm Tainted: G W O 4.4.0 #1
[ 1033.911534] Hardware name: Cisco Systems Inc UCSC-C240-M3S/UCSC-C240-M3S, BIOS C240M3.2.0.8.0.071620152208 07/16/2015
[ 1033.911535] 0000000000000000 000000004e211399 ffff885d9a9d3948 ffffffff81329090
[ 1033.911537] ffff885d9a9d3990 ffff885d9a9d3980 ffffffff810862c6 ffff882fa033c000
[ 1033.911538] ffff885f9f5bf490 ffff885fa5329e10 0000000000000001 ffffffffffffffef
[ 1033.911540] Call Trace:
[ 1033.911545] [<ffffffff81329090>] dump_stack+0x44/0x64
[ 1033.911548] [<ffffffff810862c6>] warn_slowpath_common+0x86/0xc0
[ 1033.911549] [<ffffffff8108635c>] warn_slowpath_fmt+0x5c/0x80
[ 1033.911552] [<ffffffff8127e9a8>] ? kernfs_path+0x48/0x60
[ 1033.911553] [<ffffffff81282014>] sysfs_warn_dup+0x64/0x80
[ 1033.911555] [<ffffffff812823aa>] sysfs_do_create_link_sd.isra.2+0xaa/0xb0
[ 1033.911556] [<ffffffff812823d5>] sysfs_create_link+0x25/0x40
[ 1033.911560] [<ffffffff81454a6b>] bus_add_device+0x10b/0x1f0
[ 1033.911561] [<ffffffff81452815>] device_add+0x3b5/0x610
[ 1033.911564] [<ffffffff81487df5>] scsi_sysfs_add_sdev+0xa5/0x290
[ 1033.911566] [<ffffffff81485355>] scsi_probe_and_add_lun+0xb65/0xd80
[ 1033.911570] [<ffffffff814608ac>] ? __pm_runtime_resume+0x5c/0x70
[ 1033.911572] [<ffffffff81485d67>] __scsi_scan_target+0xf7/0x260
[ 1033.911574] [<ffffffff814608ac>] ? __pm_runtime_resume+0x5c/0x70
[ 1033.911577] [<ffffffff81485fa7>] scsi_scan_target+0xd7/0xf0
[ 1033.911587] [<ffffffffa07c29f5>] iscsi_user_scan_session.part.14+0x105/0x140 [scsi_transport_iscsi]
[ 1033.911592] [<ffffffffa07c2a30>] ? iscsi_user_scan_session.part.14+0x140/0x140 [scsi_transport_iscsi]
[ 1033.911596] [<ffffffffa07c2a4e>] iscsi_user_scan_session+0x1e/0x30 [scsi_transport_iscsi]
[ 1033.911599] [<ffffffff81450b80>] device_for_each_child+0x50/0x90
[ 1033.911604] [<ffffffffa07c083d>] iscsi_user_scan+0x3d/0x60 [scsi_transport_iscsi]
[ 1033.911607] [<ffffffff81487bb6>] store_scan+0xa6/0x100
[ 1033.911612] [<ffffffff811e3158>] ? __kmalloc+0x1b8/0x250
[ 1033.911616] [<ffffffff81450318>] dev_attr_store+0x18/0x30
[ 1033.911618] [<ffffffff8128170a>] sysfs_kf_write+0x3a/0x50
[ 1033.911620] [<ffffffff81280d90>] kernfs_fop_write+0x120/0x170
[ 1033.911623] [<ffffffff81203f17>] __vfs_write+0x37/0x100
[ 1033.911626] [<ffffffff812b6c03>] ? selinux_file_permission+0xc3/0x110
[ 1033.911630] [<ffffffff812ae75d>] ? security_file_permission+0x3d/0xc0
[ 1033.911634] [<ffffffff810cd95f>] ? percpu_down_read+0x1f/0x50
[ 1033.911636] [<ffffffff812045f2>] vfs_write+0xa2/0x1a0
[ 1033.911640] [<ffffffff81003176>] ? do_audit_syscall_entry+0x66/0x70
[ 1033.911641] [<ffffffff812053b5>] SyS_write+0x55/0xc0
[ 1033.911644] [<ffffffff816945ae>] entry_SYSCALL_64_fastpath+0x12/0x71
[ 1033.911645] ---[ end trace bcfb1475313b5f62 ]---
[ 1033.911676] scsi 7:0:0:0: failed to add device: -17
[ 1033.982858] scsi 7:0:0:0: Direct-Access LIO-ORG IBLOCK 4.0 PQ: 0 ANSI: 5
[ 1033.983185] ------------[ cut here ]------------
[ 1033.983191] WARNING: CPU: 1 PID: 10574 at fs/sysfs/dir.c:31 sysfs_warn_dup+0x64/0x80()
[ 1033.983192] sysfs: cannot create duplicate filename '/bus/scsi/devices/7:0:0:0'
[ 1033.983193] Modules linked in: target_core_pscsi target_core_file target_core_iblock xt_REDIRECT nf_nat_redirect xt_nat xt_mark xt_CHECKSUM nf_conntrack_ipv6 xt_mac xt_physdev xt_set xt_conntrack iptable_raw ip_set_hash_net ip_set nfnetlink veth ebtable_filter ebtables ip6table_filter ip6_tables iscsi_tcp libiscsi_tcp 8021q garp mrp rpcrdma ib_isert iscsi_target_mod bonding ib_iser libiscsi scsi_transport_iscsi openvswitch ib_srpt target_core_mod nf_defrag_ipv6 ib_srp scsi_transport_srp ib_ipoib rdma_ucm ib_ucm ib_uverbs ib_umad rdma_cm ib_cm iw_cm xt_comment xt_multiport ib_sa iptable_filter ib_mad iptable_nat nf_conntrack_ipv4 usnic_verbs nf_defrag_ipv4 nf_nat_ipv4 nf_nat nf_conntrack ib_core ib_addr iptable_mangle x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel kvm irqbypass
crct10dif_pclmul
[ 1033.983224] crc32_pclmul aesni_intel nfsd lrw gf128mul glue_helper ablk_helper ses cryptd enclosure ipmi_devintf sg sb_edac iTCO_wdt shpchp edac_core iTCO_vendor_support ipmi_si pcspkr lpc_ich ipmi_msghandler mfd_core auth_rpcgss acpi_power_meter wmi nfs_acl lockd br_netfilter grace sunrpc bridge stp llc dm_multipath ip_tables xfs libcrc32c sd_mod mgag200 drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops ttm drm ixgbe(O) fnic i40e libfcoe igb crc32c_intel megaraid_sas enic libfc vxlan ip6_udp_tunnel udp_tunnel ptp scsi_transport_fc i2c_algo_bit i2c_core pps_core dca dm_mirror dm_region_hash dm_log dm_mod
[ 1033.983255] CPU: 1 PID: 10574 Comm: iscsiadm Tainted: G W O 4.4.0 #1
[ 1033.983256] Hardware name: Cisco Systems Inc UCSC-C240-M3S/UCSC-C240-M3S, BIOS C240M3.2.0.8.0.071620152208 07/16/2015
[ 1033.983258] 0000000000000000 00000000b4fefb6b ffff882e7b617948 ffffffff81329090
[ 1033.983260] ffff882e7b617990 ffff882e7b617980 ffffffff810862c6 ffff882e793b5000
[ 1033.983261] ffff882f9f78ded0 ffff885fa5329e10 0000000000000001 ffffffffffffffef
[ 1033.983263] Call Trace:
[ 1033.983268] [<ffffffff81329090>] dump_stack+0x44/0x64
[ 1033.983270] [<ffffffff810862c6>] warn_slowpath_common+0x86/0xc0
[ 1033.983271] [<ffffffff8108635c>] warn_slowpath_fmt+0x5c/0x80
[ 1033.983274] [<ffffffff8127e9a8>] ? kernfs_path+0x48/0x60
[ 1033.983276] [<ffffffff81282014>] sysfs_warn_dup+0x64/0x80
[ 1033.983278] [<ffffffff812823aa>] sysfs_do_create_link_sd.isra.2+0xaa/0xb0
[ 1033.983279] [<ffffffff812823d5>] sysfs_create_link+0x25/0x40
[ 1033.983282] [<ffffffff81454a6b>] bus_add_device+0x10b/0x1f0
[ 1033.983284] [<ffffffff81452815>] device_add+0x3b5/0x610
[ 1033.983287] [<ffffffff81487df5>] scsi_sysfs_add_sdev+0xa5/0x290
[ 1033.983289] [<ffffffff81485355>] scsi_probe_and_add_lun+0xb65/0xd80
[ 1033.983293] [<ffffffff814608ac>] ? __pm_runtime_resume+0x5c/0x70
[ 1033.983295] [<ffffffff81485d67>] __scsi_scan_target+0xf7/0x260
[ 1033.983297] [<ffffffff814608ac>] ? __pm_runtime_resume+0x5c/0x70
[ 1033.983298] [<ffffffff81485fa7>] scsi_scan_target+0xd7/0xf0
[ 1033.983306] [<ffffffffa07c29f5>] iscsi_user_scan_session.part.14+0x105/0x140 [scsi_transport_iscsi]
[ 1033.983309] [<ffffffffa07c2a30>] ? iscsi_user_scan_session.part.14+0x140/0x140 [scsi_transport_iscsi]
[ 1033.983313] [<ffffffffa07c2a4e>] iscsi_user_scan_session+0x1e/0x30 [scsi_transport_iscsi]
[ 1033.983314] [<ffffffff81450b80>] device_for_each_child+0x50/0x90
[ 1033.983318] [<ffffffffa07c083d>] iscsi_user_scan+0x3d/0x60 [scsi_transport_iscsi]
[ 1033.983320] [<ffffffff81487bb6>] store_scan+0xa6/0x100
[ 1033.983324] [<ffffffff811e3158>] ? __kmalloc+0x1b8/0x250
[ 1033.983327] [<ffffffff81450318>] dev_attr_store+0x18/0x30
[ 1033.983329] [<ffffffff8128170a>] sysfs_kf_write+0x3a/0x50
[ 1033.983330] [<ffffffff81280d90>] kernfs_fop_write+0x120/0x170
[ 1033.983332] [<ffffffff81203f17>] __vfs_write+0x37/0x100
[ 1033.983335] [<ffffffff812b6c03>] ? selinux_file_permission+0xc3/0x110
[ 1033.983338] [<ffffffff812ae75d>] ? security_file_permission+0x3d/0xc0
[ 1033.983341] [<ffffffff810cd95f>] ? percpu_down_read+0x1f/0x50
[ 1033.983342] [<ffffffff812045f2>] vfs_write+0xa2/0x1a0
[ 1033.983345] [<ffffffff81003176>] ? do_audit_syscall_entry+0x66/0x70
[ 1033.983346] [<ffffffff812053b5>] SyS_write+0x55/0xc0
[ 1033.983349] [<ffffffff816945ae>] entry_SYSCALL_64_fastpath+0x12/0x71
[ 1033.983350] ---[ end trace bcfb1475313b5f63 ]---
[ 1033.983379] scsi 7:0:0:0: failed to add device: -17
[ 1035.052654] scsi 7:0:0:0: Direct-Access LIO-ORG IBLOCK 4.0 PQ: 0 ANSI: 5
[ 1035.052938] ------------[ cut here ]------------
[ 1035.052943] WARNING: CPU: 1 PID: 10583 at fs/sysfs/dir.c:31 sysfs_warn_dup+0x64/0x80()
[ 1035.052944] sysfs: cannot create duplicate filename '/bus/scsi/devices/7:0:0:0'
[ 1035.052945] Modules linked in: target_core_pscsi target_core_file target_core_iblock xt_REDIRECT nf_nat_redirect xt_nat xt_mark xt_CHECKSUM nf_conntrack_ipv6 xt_mac xt_physdev xt_set xt_conntrack iptable_raw ip_set_hash_net ip_set nfnetlink veth ebtable_filter ebtables ip6table_filter ip6_tables iscsi_tcp libiscsi_tcp 8021q garp mrp rpcrdma ib_isert iscsi_target_mod bonding ib_iser libiscsi scsi_transport_iscsi openvswitch ib_srpt target_core_mod nf_defrag_ipv6 ib_srp scsi_transport_srp ib_ipoib rdma_ucm ib_ucm ib_uverbs ib_umad rdma_cm ib_cm iw_cm xt_comment xt_multiport ib_sa iptable_filter ib_mad iptable_nat nf_conntrack_ipv4 usnic_verbs nf_defrag_ipv4 nf_nat_ipv4 nf_nat nf_conntrack ib_core ib_addr iptable_mangle x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel kvm irqbypass
crct10dif_pclmul
[ 1035.052976] crc32_pclmul aesni_intel nfsd lrw gf128mul glue_helper ablk_helper ses cryptd enclosure ipmi_devintf sg sb_edac iTCO_wdt shpchp edac_core iTCO_vendor_support ipmi_si pcspkr lpc_ich ipmi_msghandler mfd_core auth_rpcgss acpi_power_meter wmi nfs_acl lockd br_netfilter grace sunrpc bridge stp llc dm_multipath ip_tables xfs libcrc32c sd_mod mgag200 drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops ttm drm ixgbe(O) fnic i40e libfcoe igb crc32c_intel megaraid_sas enic libfc vxlan ip6_udp_tunnel udp_tunnel ptp scsi_transport_fc i2c_algo_bit i2c_core pps_core dca dm_mirror dm_region_hash dm_log dm_mod
[ 1035.053043] CPU: 1 PID: 10583 Comm: iscsiadm Tainted: G W O 4.4.0 #1
[ 1035.053044] Hardware name: Cisco Systems Inc UCSC-C240-M3S/UCSC-C240-M3S, BIOS C240M3.2.0.8.0.071620152208 07/16/2015
[ 1035.053045] 0000000000000000 00000000acef2a8b ffff882e7b603948 ffffffff81329090
[ 1035.053047] ffff882e7b603990 ffff882e7b603980 ffffffff810862c6 ffff882e793b5000
[ 1035.053049] ffff882f9feaa880 ffff885fa5329e10 0000000000000001 ffffffffffffffef
[ 1035.053050] Call Trace:
[ 1035.053056] [<ffffffff81329090>] dump_stack+0x44/0x64
[ 1035.053058] [<ffffffff810862c6>] warn_slowpath_common+0x86/0xc0
[ 1035.053060] [<ffffffff8108635c>] warn_slowpath_fmt+0x5c/0x80
[ 1035.053063] [<ffffffff8127e9a8>] ? kernfs_path+0x48/0x60
[ 1035.053064] [<ffffffff81282014>] sysfs_warn_dup+0x64/0x80
[ 1035.053066] [<ffffffff812823aa>] sysfs_do_create_link_sd.isra.2+0xaa/0xb0
[ 1035.053068] [<ffffffff812823d5>] sysfs_create_link+0x25/0x40
[ 1035.053071] [<ffffffff81454a6b>] bus_add_device+0x10b/0x1f0
[ 1035.053073] [<ffffffff81452815>] device_add+0x3b5/0x610
[ 1035.053076] [<ffffffff81487df5>] scsi_sysfs_add_sdev+0xa5/0x290
[ 1035.053078] [<ffffffff81485355>] scsi_probe_and_add_lun+0xb65/0xd80
[ 1035.053082] [<ffffffff814608ac>] ? __pm_runtime_resume+0x5c/0x70
[ 1035.053084] [<ffffffff81485d67>] __scsi_scan_target+0xf7/0x260
[ 1035.053085] [<ffffffff814608ac>] ? __pm_runtime_resume+0x5c/0x70
[ 1035.053087] [<ffffffff81485fa7>] scsi_scan_target+0xd7/0xf0
[ 1035.053094] [<ffffffffa07c29f5>] iscsi_user_scan_session.part.14+0x105/0x140 [scsi_transport_iscsi]
[ 1035.053097] [<ffffffffa07c2a30>] ? iscsi_user_scan_session.part.14+0x140/0x140 [scsi_transport_iscsi]
[ 1035.053101] [<ffffffffa07c2a4e>] iscsi_user_scan_session+0x1e/0x30 [scsi_transport_iscsi]
[ 1035.053102] [<ffffffff81450b80>] device_for_each_child+0x50/0x90
[ 1035.053106] [<ffffffffa07c083d>] iscsi_user_scan+0x3d/0x60 [scsi_transport_iscsi]
[ 1035.053108] [<ffffffff81487bb6>] store_scan+0xa6/0x100
[ 1035.053111] [<ffffffff811e3158>] ? __kmalloc+0x1b8/0x250
[ 1035.053115] [<ffffffff81450318>] dev_attr_store+0x18/0x30
[ 1035.053116] [<ffffffff8128170a>] sysfs_kf_write+0x3a/0x50
[ 1035.053118] [<ffffffff81280d90>] kernfs_fop_write+0x120/0x170
[ 1035.053120] [<ffffffff81203f17>] __vfs_write+0x37/0x100
[ 1035.053122] [<ffffffff812b6c03>] ? selinux_file_permission+0xc3/0x110
[ 1035.053126] [<ffffffff812ae75d>] ? security_file_permission+0x3d/0xc0
[ 1035.053129] [<ffffffff810cd95f>] ? percpu_down_read+0x1f/0x50
[ 1035.053130] [<ffffffff812045f2>] vfs_write+0xa2/0x1a0
[ 1035.053132] [<ffffffff81003176>] ? do_audit_syscall_entry+0x66/0x70
[ 1035.053134] [<ffffffff812053b5>] SyS_write+0x55/0xc0
[ 1035.053137] [<ffffffff816945ae>] entry_SYSCALL_64_fastpath+0x12/0x71
[ 1035.053138] ---[ end trace bcfb1475313b5f64 ]---
[ 1035.053185] scsi 7:0:0:0: failed to add device: -17
[ 1039.129111] scsi 7:0:0:0: Direct-Access LIO-ORG IBLOCK 4.0 PQ: 0 ANSI: 5
[ 1039.129445] ------------[ cut here ]------------
[ 1039.129450] WARNING: CPU: 1 PID: 10604 at fs/sysfs/dir.c:31 sysfs_warn_dup+0x64/0x80()
[ 1039.129451] sysfs: cannot create duplicate filename '/bus/scsi/devices/7:0:0:0'
[ 1039.129452] Modules linked in: target_core_pscsi target_core_file target_core_iblock xt_REDIRECT nf_nat_redirect xt_nat xt_mark xt_CHECKSUM nf_conntrack_ipv6 xt_mac xt_physdev xt_set xt_conntrack iptable_raw ip_set_hash_net ip_set nfnetlink veth ebtable_filter ebtables ip6table_filter ip6_tables iscsi_tcp libiscsi_tcp 8021q garp mrp rpcrdma ib_isert iscsi_target_mod bonding ib_iser libiscsi scsi_transport_iscsi openvswitch ib_srpt target_core_mod nf_defrag_ipv6 ib_srp scsi_transport_srp ib_ipoib rdma_ucm ib_ucm ib_uverbs ib_umad rdma_cm ib_cm iw_cm xt_comment xt_multiport ib_sa iptable_filter ib_mad iptable_nat nf_conntrack_ipv4 usnic_verbs nf_defrag_ipv4 nf_nat_ipv4 nf_nat nf_conntrack ib_core ib_addr iptable_mangle x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel kvm irqbypass
crct10dif_pclmul
[ 1039.129483] crc32_pclmul aesni_intel nfsd lrw gf128mul glue_helper ablk_helper ses cryptd enclosure ipmi_devintf sg sb_edac iTCO_wdt shpchp edac_core iTCO_vendor_support ipmi_si pcspkr lpc_ich ipmi_msghandler mfd_core auth_rpcgss acpi_power_meter wmi nfs_acl lockd br_netfilter grace sunrpc bridge stp llc dm_multipath ip_tables xfs libcrc32c sd_mod mgag200 drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops ttm drm ixgbe(O) fnic i40e libfcoe igb crc32c_intel megaraid_sas enic libfc vxlan ip6_udp_tunnel udp_tunnel ptp scsi_transport_fc i2c_algo_bit i2c_core pps_core dca dm_mirror dm_region_hash dm_log dm_mod
[ 1039.129513] CPU: 1 PID: 10604 Comm: iscsiadm Tainted: G W O 4.4.0 #1
[ 1039.129514] Hardware name: Cisco Systems Inc UCSC-C240-M3S/UCSC-C240-M3S, BIOS C240M3.2.0.8.0.071620152208 07/16/2015
[ 1039.129515] 0000000000000000 00000000c52587c8 ffff885fa5c9b948 ffffffff81329090
[ 1039.129517] ffff885fa5c9b990 ffff885fa5c9b980 ffffffff810862c6 ffff882e793b5000
[ 1039.129519] ffff882f9fb97fa8 ffff885fa5329e10 0000000000000001 ffffffffffffffef
[ 1039.129530] Call Trace:
[ 1039.129535] [<ffffffff81329090>] dump_stack+0x44/0x64
[ 1039.129538] [<ffffffff810862c6>] warn_slowpath_common+0x86/0xc0
[ 1039.129539] [<ffffffff8108635c>] warn_slowpath_fmt+0x5c/0x80
[ 1039.129542] [<ffffffff8127e9a8>] ? kernfs_path+0x48/0x60
[ 1039.129544] [<ffffffff81282014>] sysfs_warn_dup+0x64/0x80
[ 1039.129545] [<ffffffff812823aa>] sysfs_do_create_link_sd.isra.2+0xaa/0xb0
[ 1039.129547] [<ffffffff812823d5>] sysfs_create_link+0x25/0x40
[ 1039.129550] [<ffffffff81454a6b>] bus_add_device+0x10b/0x1f0
[ 1039.129552] [<ffffffff81452815>] device_add+0x3b5/0x610
[ 1039.129555] [<ffffffff81487df5>] scsi_sysfs_add_sdev+0xa5/0x290
[ 1039.129557] [<ffffffff81485355>] scsi_probe_and_add_lun+0xb65/0xd80
[ 1039.129561] [<ffffffff814608ac>] ? __pm_runtime_resume+0x5c/0x70
[ 1039.129562] [<ffffffff81485d67>] __scsi_scan_target+0xf7/0x260
[ 1039.129564] [<ffffffff814608ac>] ? __pm_runtime_resume+0x5c/0x70
[ 1039.129566] [<ffffffff81485fa7>] scsi_scan_target+0xd7/0xf0
[ 1039.129573] [<ffffffffa07c29f5>] iscsi_user_scan_session.part.14+0x105/0x140 [scsi_transport_iscsi]
[ 1039.129576] [<ffffffffa07c2a30>] ? iscsi_user_scan_session.part.14+0x140/0x140 [scsi_transport_iscsi]
[ 1039.129580] [<ffffffffa07c2a4e>] iscsi_user_scan_session+0x1e/0x30 [scsi_transport_iscsi]
[ 1039.129581] [<ffffffff81450b80>] device_for_each_child+0x50/0x90
[ 1039.129585] [<ffffffffa07c083d>] iscsi_user_scan+0x3d/0x60 [scsi_transport_iscsi]
[ 1039.129587] [<ffffffff81487bb6>] store_scan+0xa6/0x100
[ 1039.129591] [<ffffffff811e3158>] ? __kmalloc+0x1b8/0x250
[ 1039.129594] [<ffffffff81450318>] dev_attr_store+0x18/0x30
[ 1039.129596] [<ffffffff8128170a>] sysfs_kf_write+0x3a/0x50
[ 1039.129597] [<ffffffff81280d90>] kernfs_fop_write+0x120/0x170
[ 1039.129599] [<ffffffff81203f17>] __vfs_write+0x37/0x100
[ 1039.129602] [<ffffffff812b6c03>] ? selinux_file_permission+0xc3/0x110
[ 1039.129605] [<ffffffff812ae75d>] ? security_file_permission+0x3d/0xc0
[ 1039.129607] [<ffffffff810cd95f>] ? percpu_down_read+0x1f/0x50
[ 1039.129609] [<ffffffff812045f2>] vfs_write+0xa2/0x1a0
[ 1039.129611] [<ffffffff81003176>] ? do_audit_syscall_entry+0x66/0x70
[ 1039.129612] [<ffffffff812053b5>] SyS_write+0x55/0xc0
[ 1039.129615] [<ffffffff816945ae>] entry_SYSCALL_64_fastpath+0x12/0x71
[ 1039.129616] ---[ end trace bcfb1475313b5f65 ]---
[ 1039.129638] scsi 7:0:0:0: failed to add device: -17
[ 1048.204151] scsi 7:0:0:0: Direct-Access LIO-ORG IBLOCK 4.0 PQ: 0 ANSI: 5
[ 1048.204524] ------------[ cut here ]------------
[ 1048.204530] WARNING: CPU: 2 PID: 10624 at fs/sysfs/dir.c:31 sysfs_warn_dup+0x64/0x80()
[ 1048.204531] sysfs: cannot create duplicate filename '/bus/scsi/devices/7:0:0:0'
[ 1048.204532] Modules linked in: target_core_pscsi target_core_file target_core_iblock xt_REDIRECT nf_nat_redirect xt_nat xt_mark xt_CHECKSUM nf_conntrack_ipv6 xt_mac xt_physdev xt_set xt_conntrack iptable_raw ip_set_hash_net ip_set nfnetlink veth ebtable_filter ebtables ip6table_filter ip6_tables iscsi_tcp libiscsi_tcp 8021q garp mrp rpcrdma ib_isert iscsi_target_mod bonding ib_iser libiscsi scsi_transport_iscsi openvswitch ib_srpt target_core_mod nf_defrag_ipv6 ib_srp scsi_transport_srp ib_ipoib rdma_ucm ib_ucm ib_uverbs ib_umad rdma_cm ib_cm iw_cm xt_comment xt_multiport ib_sa iptable_filter ib_mad iptable_nat nf_conntrack_ipv4 usnic_verbs nf_defrag_ipv4 nf_nat_ipv4 nf_nat nf_conntrack ib_core ib_addr iptable_mangle x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel kvm irqbypass
crct10dif_pclmul
[ 1048.204564] crc32_pclmul aesni_intel nfsd lrw gf128mul glue_helper ablk_helper ses cryptd enclosure ipmi_devintf sg sb_edac iTCO_wdt shpchp edac_core iTCO_vendor_support ipmi_si pcspkr lpc_ich ipmi_msghandler mfd_core auth_rpcgss acpi_power_meter wmi nfs_acl lockd br_netfilter grace sunrpc bridge stp llc dm_multipath ip_tables xfs libcrc32c sd_mod mgag200 drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops ttm drm ixgbe(O) fnic i40e libfcoe igb crc32c_intel megaraid_sas enic libfc vxlan ip6_udp_tunnel udp_tunnel ptp scsi_transport_fc i2c_algo_bit i2c_core pps_core dca dm_mirror dm_region_hash dm_log dm_mod
[ 1048.204597] CPU: 2 PID: 10624 Comm: iscsiadm Tainted: G W O 4.4.0 #1
[ 1048.204599] Hardware name: Cisco Systems Inc UCSC-C240-M3S/UCSC-C240-M3S, BIOS C240M3.2.0.8.0.071620152208 07/16/2015
[ 1048.204600] 0000000000000000 0000000088d9f919 ffff882e7aa0b948 ffffffff81329090
[ 1048.204602] ffff882e7aa0b990 ffff882e7aa0b980 ffffffff810862c6 ffff882e7b4f1000
[ 1048.204604] ffff885f9f16f2c8 ffff885fa5329e10 0000000000000001 ffffffffffffffef
[ 1048.204605] Call Trace:
[ 1048.204612] [<ffffffff81329090>] dump_stack+0x44/0x64
[ 1048.204614] [<ffffffff810862c6>] warn_slowpath_common+0x86/0xc0
[ 1048.204616] [<ffffffff8108635c>] warn_slowpath_fmt+0x5c/0x80
[ 1048.204619] [<ffffffff8127e9a8>] ? kernfs_path+0x48/0x60
[ 1048.204620] [<ffffffff81282014>] sysfs_warn_dup+0x64/0x80
[ 1048.204622] [<ffffffff812823aa>] sysfs_do_create_link_sd.isra.2+0xaa/0xb0
[ 1048.204624] [<ffffffff812823d5>] sysfs_create_link+0x25/0x40
[ 1048.204627] [<ffffffff81454a6b>] bus_add_device+0x10b/0x1f0
[ 1048.204628] [<ffffffff81452815>] device_add+0x3b5/0x610
[ 1048.204632] [<ffffffff81487df5>] scsi_sysfs_add_sdev+0xa5/0x290
[ 1048.204634] [<ffffffff81485355>] scsi_probe_and_add_lun+0xb65/0xd80
[ 1048.204638] [<ffffffff814608ac>] ? __pm_runtime_resume+0x5c/0x70
[ 1048.204640] [<ffffffff81485d67>] __scsi_scan_target+0xf7/0x260
[ 1048.204641] [<ffffffff814608ac>] ? __pm_runtime_resume+0x5c/0x70
[ 1048.204643] [<ffffffff81485fa7>] scsi_scan_target+0xd7/0xf0
[ 1048.204651] [<ffffffffa07c29f5>] iscsi_user_scan_session.part.14+0x105/0x140 [scsi_transport_iscsi]
[ 1048.204654] [<ffffffffa07c2a30>] ? iscsi_user_scan_session.part.14+0x140/0x140 [scsi_transport_iscsi]
[ 1048.204658] [<ffffffffa07c2a4e>] iscsi_user_scan_session+0x1e/0x30 [scsi_transport_iscsi]
[ 1048.204659] [<ffffffff81450b80>] device_for_each_child+0x50/0x90
[ 1048.204663] [<ffffffffa07c083d>] iscsi_user_scan+0x3d/0x60 [scsi_transport_iscsi]
[ 1048.204665] [<ffffffff81487bb6>] store_scan+0xa6/0x100
[ 1048.204669] [<ffffffff811e3158>] ? __kmalloc+0x1b8/0x250
[ 1048.204673] [<ffffffff81450318>] dev_attr_store+0x18/0x30
[ 1048.204674] [<ffffffff8128170a>] sysfs_kf_write+0x3a/0x50
[ 1048.204676] [<ffffffff81280d90>] kernfs_fop_write+0x120/0x170
[ 1048.204678] [<ffffffff81203f17>] __vfs_write+0x37/0x100
[ 1048.204680] [<ffffffff812b6c03>] ? selinux_file_permission+0xc3/0x110
[ 1048.204684] [<ffffffff812ae75d>] ? security_file_permission+0x3d/0xc0
[ 1048.204687] [<ffffffff810cd95f>] ? percpu_down_read+0x1f/0x50
[ 1048.204688] [<ffffffff812045f2>] vfs_write+0xa2/0x1a0
[ 1048.204690] [<ffffffff81003176>] ? do_audit_syscall_entry+0x66/0x70
[ 1048.204692] [<ffffffff812053b5>] SyS_write+0x55/0xc0
[ 1048.204695] [<ffffffff816945ae>] entry_SYSCALL_64_fastpath+0x12/0x71
[ 1048.204697] ---[ end trace bcfb1475313b5f66 ]---
[ 1048.204719] scsi 7:0:0:0: failed to add device: -17
[ 1064.276300] scsi 7:0:0:0: Direct-Access LIO-ORG IBLOCK 4.0 PQ: 0 ANSI: 5
[ 1064.276598] ------------[ cut here ]------------
[ 1064.276603] WARNING: CPU: 1 PID: 10652 at fs/sysfs/dir.c:31 sysfs_warn_dup+0x64/0x80()
[ 1064.276604] sysfs: cannot create duplicate filename '/bus/scsi/devices/7:0:0:0'
[ 1064.276604] Modules linked in: target_core_pscsi target_core_file target_core_iblock xt_REDIRECT nf_nat_redirect xt_nat xt_mark xt_CHECKSUM nf_conntrack_ipv6 xt_mac xt_physdev xt_set xt_conntrack iptable_raw ip_set_hash_net ip_set nfnetlink veth ebtable_filter ebtables ip6table_filter ip6_tables iscsi_tcp libiscsi_tcp 8021q garp mrp rpcrdma ib_isert iscsi_target_mod bonding ib_iser libiscsi scsi_transport_iscsi openvswitch ib_srpt target_core_mod nf_defrag_ipv6 ib_srp scsi_transport_srp ib_ipoib rdma_ucm ib_ucm ib_uverbs ib_umad rdma_cm ib_cm iw_cm xt_comment xt_multiport ib_sa iptable_filter ib_mad iptable_nat nf_conntrack_ipv4 usnic_verbs nf_defrag_ipv4 nf_nat_ipv4 nf_nat nf_conntrack ib_core ib_addr iptable_mangle x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel kvm irqbypass
crct10dif_pclmul
[ 1064.276649] crc32_pclmul aesni_intel nfsd lrw gf128mul glue_helper ablk_helper ses cryptd enclosure ipmi_devintf sg sb_edac iTCO_wdt shpchp edac_core iTCO_vendor_support ipmi_si pcspkr lpc_ich ipmi_msghandler mfd_core auth_rpcgss acpi_power_meter wmi nfs_acl lockd br_netfilter grace sunrpc bridge stp llc dm_multipath ip_tables xfs libcrc32c sd_mod mgag200 drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops ttm drm ixgbe(O) fnic i40e libfcoe igb crc32c_intel megaraid_sas enic libfc vxlan ip6_udp_tunnel udp_tunnel ptp scsi_transport_fc i2c_algo_bit i2c_core pps_core dca dm_mirror dm_region_hash dm_log dm_mod
[ 1064.276682] CPU: 1 PID: 10652 Comm: iscsiadm Tainted: G W O 4.4.0 #1
[ 1064.276683] Hardware name: Cisco Systems Inc UCSC-C240-M3S/UCSC-C240-M3S, BIOS C240M3.2.0.8.0.071620152208 07/16/2015
[ 1064.276684] 0000000000000000 0000000080e19618 ffff882e7aa0b948 ffffffff81329090
[ 1064.276686] ffff882e7aa0b990 ffff882e7aa0b980 ffffffff810862c6 ffff882f9fed7000
[ 1064.276688] ffff885f9f16f2d0 ffff885fa5329e10 0000000000000001 ffffffffffffffef
[ 1064.276689] Call Trace:
[ 1064.276695] [<ffffffff81329090>] dump_stack+0x44/0x64
[ 1064.276698] [<ffffffff810862c6>] warn_slowpath_common+0x86/0xc0
[ 1064.276700] [<ffffffff8108635c>] warn_slowpath_fmt+0x5c/0x80
[ 1064.276703] [<ffffffff8127e9a8>] ? kernfs_path+0x48/0x60
[ 1064.276704] [<ffffffff81282014>] sysfs_warn_dup+0x64/0x80
[ 1064.276706] [<ffffffff812823aa>] sysfs_do_create_link_sd.isra.2+0xaa/0xb0
[ 1064.276708] [<ffffffff812823d5>] sysfs_create_link+0x25/0x40
[ 1064.276711] [<ffffffff81454a6b>] bus_add_device+0x10b/0x1f0
[ 1064.276712] [<ffffffff81452815>] device_add+0x3b5/0x610
[ 1064.276716] [<ffffffff81487df5>] scsi_sysfs_add_sdev+0xa5/0x290
[ 1064.276718] [<ffffffff81485355>] scsi_probe_and_add_lun+0xb65/0xd80
[ 1064.276722] [<ffffffff814608ac>] ? __pm_runtime_resume+0x5c/0x70
[ 1064.276724] [<ffffffff81485d67>] __scsi_scan_target+0xf7/0x260
[ 1064.276725] [<ffffffff814608ac>] ? __pm_runtime_resume+0x5c/0x70
[ 1064.276727] [<ffffffff81485fa7>] scsi_scan_target+0xd7/0xf0
[ 1064.276734] [<ffffffffa07c29f5>] iscsi_user_scan_session.part.14+0x105/0x140 [scsi_transport_iscsi]
[ 1064.276738] [<ffffffffa07c2a30>] ? iscsi_user_scan_session.part.14+0x140/0x140 [scsi_transport_iscsi]
[ 1064.276742] [<ffffffffa07c2a4e>] iscsi_user_scan_session+0x1e/0x30 [scsi_transport_iscsi]
[ 1064.276743] [<ffffffff81450b80>] device_for_each_child+0x50/0x90
[ 1064.276747] [<ffffffffa07c083d>] iscsi_user_scan+0x3d/0x60 [scsi_transport_iscsi]
[ 1064.276749] [<ffffffff81487bb6>] store_scan+0xa6/0x100
[ 1064.276753] [<ffffffff811e3158>] ? __kmalloc+0x1b8/0x250
[ 1064.276757] [<ffffffff81450318>] dev_attr_store+0x18/0x30
[ 1064.276759] [<ffffffff8128170a>] sysfs_kf_write+0x3a/0x50
[ 1064.276760] [<ffffffff81280d90>] kernfs_fop_write+0x120/0x170
[ 1064.276762] [<ffffffff81203f17>] __vfs_write+0x37/0x100
[ 1064.276765] [<ffffffff812b6c03>] ? selinux_file_permission+0xc3/0x110
[ 1064.276769] [<ffffffff812ae75d>] ? security_file_permission+0x3d/0xc0
[ 1064.276772] [<ffffffff810cd95f>] ? percpu_down_read+0x1f/0x50
[ 1064.276773] [<ffffffff812045f2>] vfs_write+0xa2/0x1a0
[ 1064.276776] [<ffffffff81003176>] ? do_audit_syscall_entry+0x66/0x70
[ 1064.276777] [<ffffffff812053b5>] SyS_write+0x55/0xc0
[ 1064.276780] [<ffffffff816945ae>] entry_SYSCALL_64_fastpath+0x12/0x71
[ 1064.276781] ---[ end trace bcfb1475313b5f67 ]---
[ 1064.276817] scsi 7:0:0:0: failed to add device: -17
Thank you
Serguei
-----Original Message-----
From: Michael Christie [mailto:michaelc@cs.wisc.edu]
Sent: Friday, January 29, 2016 3:02 AM
To: Serguei Bezverkhi (sbezverk) <sbezverk@cisco.com>
Cc: bugzilla-daemon@bugzilla.kernel.org; linux-scsi@vger.kernel.org
Subject: Re: [Bug 111441] New: iscsi fails to attach to targets
Can you send me your lio config?
Are you running lio on the same box as the initiator so it is also changing kernel version with each test?
It looks like the scsi scan code is not handling the lack of LUN 0 correctly. I think I know what patch is causing it, but cannot get my lio config to return the same info as you for the non existent LUNs, so I think I am hitting slightly different error paths.
> On Jan 28, 2016, at 8:55 PM, Serguei Bezverkhi (sbezverk) <sbezverk@cisco.com> wrote:
>
> HI Mike,
>
> Thank you for looking into this issue.
> I reproduced this issue this using both mainline compiled kernel and the one posted by El Repo. I used both of these kernels with RHEL 7.2, both kernels showed exactly the same issue. When I rollback to the original kernel 3.10.0-327.4.4, I do not see the issue.
>
> As per your request attaching kernel config file. Please let me know if you need any additional info or if you want to take a look at the router, I can setup a webex meeting to show you the issue.
>
> Thank you
>
> Serguei
>
>
>
>
> Serguei Bezverkhi,
> TECHNICAL LEADER.SERVICES
> Global SP Services
> sbezverk@cisco.com
> Phone: +1 416 306 7312
> Mobile: +1 514 234 7374
>
> CCIE (R&S,SP,Sec) - #9527
>
> Cisco.com
>
>
>
> Think before you print.
> This email may contain confidential and privileged material for the sole use of the intended recipient. Any review, use, distribution or disclosure by others is strictly prohibited. If you are not the intended recipient (or authorized to receive for the recipient), please contact the sender by reply email and delete all copies of this message.
> Please click here for Company Registration Information.
>
>
>
>
> -----Original Message-----
> From: linux-scsi-owner@vger.kernel.org [mailto:linux-scsi-owner@vger.kernel.org] On Behalf Of Mike Christie
> Sent: Thursday, January 28, 2016 8:53 PM
> To: bugzilla-daemon@bugzilla.kernel.org; linux-scsi@vger.kernel.org
> Subject: Re: [Bug 111441] New: iscsi fails to attach to targets
>
> On 01/28/2016 04:51 PM, bugzilla-daemon@bugzilla.kernel.org wrote:
>> https://bugzilla.kernel.org/show_bug.cgi?id=111441
>>
>> Bug ID: 111441
>> Summary: iscsi fails to attach to targets
>> Product: IO/Storage
>> Version: 2.5
>> Kernel Version: 4.4.0-1
>> Hardware: x86-64
>> OS: Linux
>> Tree: Mainline
>> Status: NEW
>
>
>> 4.4.0-1.el7.elrepo.x86_64 #1
>
> I have not seen this oops before. We saw similar ones around 5 or 6 years ago, but they were due to some sysfs or block or scsi issue (I cannot remember exacty) and fixed there.
>
> Is this a distro kernel or mainline. BZ says mainline, but the kernel name in bug looks like a red hat related one. Where did you get it?
>
> I do not hit this in 4.4 mainline. Send me your kernel .config, so I can make sure I have the same options.
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-scsi" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 46+ messages in thread* Re: [Bug 111441] New: iscsi fails to attach to targets
2016-01-29 12:04 ` Serguei Bezverkhi (sbezverk)
@ 2016-01-29 19:08 ` Michael Christie
2016-01-29 19:11 ` Serguei Bezverkhi (sbezverk)
0 siblings, 1 reply; 46+ messages in thread
From: Michael Christie @ 2016-01-29 19:08 UTC (permalink / raw)
To: Serguei Bezverkhi (sbezverk)
Cc: bugzilla-daemon@bugzilla.kernel.org, linux-scsi@vger.kernel.org
> On Jan 29, 2016, at 6:04 AM, Serguei Bezverkhi (sbezverk) <sbezverk@cisco.com> wrote:
>
> Actually this server uses both cases: Local taregts (since it is OpenStack server) and remote targets as it tries to mount 4 remotefile systems.
>
> You are correct, I always use the same box I just change the kernel it is using to boot. No other changes to the environment. I do not mind to load a test kernel without that suspected patch, just get me the RPM.
>
I do not know what you mean. I think the patch I sent will fix the sysfs errors caused due to alua not being setup properly on your system and scsi_dh_alua failing to attach. That patch should be applied to the 4.4 upstream kernel. Are you saying you want me to make you a kernel rpm?
^ permalink raw reply [flat|nested] 46+ messages in thread
* RE: [Bug 111441] New: iscsi fails to attach to targets
2016-01-29 19:08 ` Michael Christie
@ 2016-01-29 19:11 ` Serguei Bezverkhi (sbezverk)
2016-01-29 19:26 ` Mike Christie
0 siblings, 1 reply; 46+ messages in thread
From: Serguei Bezverkhi (sbezverk) @ 2016-01-29 19:11 UTC (permalink / raw)
To: Michael Christie
Cc: bugzilla-daemon@bugzilla.kernel.org, linux-scsi@vger.kernel.org
If you send me the diff for your patch, I will build new kernel myself.
Serguei
Serguei Bezverkhi,
TECHNICAL LEADER.SERVICES
Global SP Services
sbezverk@cisco.com
Phone: +1 416 306 7312
Mobile: +1 514 234 7374
CCIE (R&S,SP,Sec) - #9527
Cisco.com
Think before you print.
This email may contain confidential and privileged material for the sole use of the intended recipient. Any review, use, distribution or disclosure by others is strictly prohibited. If you are not the intended recipient (or authorized to receive for the recipient), please contact the sender by reply email and delete all copies of this message.
Please click here for Company Registration Information.
-----Original Message-----
From: Michael Christie [mailto:michaelc@cs.wisc.edu]
Sent: Friday, January 29, 2016 2:09 PM
To: Serguei Bezverkhi (sbezverk) <sbezverk@cisco.com>
Cc: bugzilla-daemon@bugzilla.kernel.org; linux-scsi@vger.kernel.org
Subject: Re: [Bug 111441] New: iscsi fails to attach to targets
> On Jan 29, 2016, at 6:04 AM, Serguei Bezverkhi (sbezverk) <sbezverk@cisco.com> wrote:
>
> Actually this server uses both cases: Local taregts (since it is OpenStack server) and remote targets as it tries to mount 4 remotefile systems.
>
> You are correct, I always use the same box I just change the kernel it is using to boot. No other changes to the environment. I do not mind to load a test kernel without that suspected patch, just get me the RPM.
>
I do not know what you mean. I think the patch I sent will fix the sysfs errors caused due to alua not being setup properly on your system and scsi_dh_alua failing to attach. That patch should be applied to the 4.4 upstream kernel. Are you saying you want me to make you a kernel rpm?
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 46+ messages in thread
* Re: [Bug 111441] New: iscsi fails to attach to targets
2016-01-29 19:11 ` Serguei Bezverkhi (sbezverk)
@ 2016-01-29 19:26 ` Mike Christie
2016-01-29 22:21 ` Serguei Bezverkhi (sbezverk)
0 siblings, 1 reply; 46+ messages in thread
From: Mike Christie @ 2016-01-29 19:26 UTC (permalink / raw)
To: Serguei Bezverkhi (sbezverk)
Cc: bugzilla-daemon@bugzilla.kernel.org, linux-scsi@vger.kernel.org
[-- Attachment #1: Type: text/plain, Size: 2413 bytes --]
On 01/29/2016 01:11 PM, Serguei Bezverkhi (sbezverk) wrote:
> If you send me the diff for your patch, I will build new kernel myself.
>
Bugzilla must be messing something up. I attached to one of the previous
mails. Attaching it here again.
Email me offlist and without bugzilla if you do not get it here.
The patch will fix the syfs bug ons you are hitting.
I am not sure if it will fix the genhd one. We can deal with that one
next if it is a different issue.
> Serguei
>
>
> Serguei Bezverkhi,
> TECHNICAL LEADER.SERVICES
> Global SP Services
> sbezverk@cisco.com
> Phone: +1 416 306 7312
> Mobile: +1 514 234 7374
>
> CCIE (R&S,SP,Sec) - #9527
>
> Cisco.com
>
>
>
> Think before you print.
> This email may contain confidential and privileged material for the sole use of the intended recipient. Any review, use, distribution or disclosure by others is strictly prohibited. If you are not the intended recipient (or authorized to receive for the recipient), please contact the sender by reply email and delete all copies of this message.
> Please click here for Company Registration Information.
>
>
>
>
> -----Original Message-----
> From: Michael Christie [mailto:michaelc@cs.wisc.edu]
> Sent: Friday, January 29, 2016 2:09 PM
> To: Serguei Bezverkhi (sbezverk) <sbezverk@cisco.com>
> Cc: bugzilla-daemon@bugzilla.kernel.org; linux-scsi@vger.kernel.org
> Subject: Re: [Bug 111441] New: iscsi fails to attach to targets
>
>
>> On Jan 29, 2016, at 6:04 AM, Serguei Bezverkhi (sbezverk) <sbezverk@cisco.com> wrote:
>>
>> Actually this server uses both cases: Local taregts (since it is OpenStack server) and remote targets as it tries to mount 4 remotefile systems.
>>
>> You are correct, I always use the same box I just change the kernel it is using to boot. No other changes to the environment. I do not mind to load a test kernel without that suspected patch, just get me the RPM.
>>
>
> I do not know what you mean. I think the patch I sent will fix the sysfs errors caused due to alua not being setup properly on your system and scsi_dh_alua failing to attach. That patch should be applied to the 4.4 upstream kernel. Are you saying you want me to make you a kernel rpm?
> --
> To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
[-- Attachment #2: fix-add-dev-alua-attach-fail-regression.patch --]
[-- Type: text/x-patch, Size: 389 bytes --]
diff --git a/drivers/scsi/scsi_sysfs.c b/drivers/scsi/scsi_sysfs.c
index 21930c9..4269cbc 100644
--- a/drivers/scsi/scsi_sysfs.c
+++ b/drivers/scsi/scsi_sysfs.c
@@ -1061,6 +1061,7 @@ int scsi_sysfs_add_sdev(struct scsi_device *sdev)
if (error) {
sdev_printk(KERN_INFO, sdev,
"failed to add device handler: %d\n", error);
+ device_del(&sdev->sdev_gendev);
return error;
}
^ permalink raw reply related [flat|nested] 46+ messages in thread* RE: [Bug 111441] New: iscsi fails to attach to targets
2016-01-29 19:26 ` Mike Christie
@ 2016-01-29 22:21 ` Serguei Bezverkhi (sbezverk)
2016-01-29 23:32 ` Mike Christie
0 siblings, 1 reply; 46+ messages in thread
From: Serguei Bezverkhi (sbezverk) @ 2016-01-29 22:21 UTC (permalink / raw)
To: Mike Christie
Cc: bugzilla-daemon@bugzilla.kernel.org, linux-scsi@vger.kernel.org
HI Mike,
I tried your patch and it is has eliminated first traceback but I still do not see my remote targets.
Here is dmesg
[ 26.103812] scsi 3:0:0:2: Direct-Access LIO-ORG san-disk-2 4.0 PQ: 0 ANSI: 5
[ 26.104338] sd 3:0:0:2: alua: supports implicit and explicit TPGS
[ 26.104549] sd 3:0:0:2: alua: No target port descriptors found
[ 26.104552] sd 3:0:0:2: alua: Attach failed (-22)
[ 26.104554] sd 3:0:0:2: failed to add device handler: -22
[ 26.104578] sd 3:0:0:2: [sdc] 20507809792 512-byte logical blocks: (10.4 TB/9.54 TiB)
[ 26.104905] sd 3:0:0:2: [sdc] Write Protect is off
[ 26.104908] sd 3:0:0:2: [sdc] Mode Sense: 43 00 10 08
[ 26.105036] sd 3:0:0:2: [sdc] Write cache: enabled, read cache: enabled, supports DPO and FUA
[ 26.112294] scsi host6: iSCSI Initiator over TCP/IP
[ 26.113279] scsi 4:0:0:3: Direct-Access LIO-ORG san-disk-3 4.0 PQ: 0 ANSI: 5
[ 26.113690] sd 4:0:0:3: alua: supports implicit and explicit TPGS
[ 26.113877] sd 4:0:0:3: [sdd] 9765625856 512-byte logical blocks: (5.00 TB/4.54 TiB)
[ 26.113948] sd 4:0:0:3: alua: No target port descriptors found
[ 26.113951] sd 4:0:0:3: alua: Attach failed (-22)
[ 26.113953] sd 4:0:0:3: failed to add device handler: -22
[ 26.114292] sd 4:0:0:3: [sdd] Write Protect is off
[ 26.114295] sd 4:0:0:3: [sdd] Mode Sense: 43 00 10 08
[ 26.114503] sd 4:0:0:3: [sdd] Write cache: enabled, read cache: enabled, supports DPO and FUA
[ 26.123875] scsi 5:0:0:1: Direct-Access LIO-ORG san-disk-1 4.0 PQ: 0 ANSI: 5
[ 26.123911] scsi 6:0:0:4: Direct-Access LIO-ORG san-disk-4 4.0 PQ: 0 ANSI: 5
[ 26.124452] sd 6:0:0:4: alua: supports implicit and explicit TPGS
[ 26.124453] sd 5:0:0:1: alua: supports implicit and explicit TPGS
[ 26.124724] sd 5:0:0:1: alua: No target port descriptors found
[ 26.124727] sd 5:0:0:1: alua: Attach failed (-22)
[ 26.124728] sd 5:0:0:1: failed to add device handler: -22
[ 26.124736] sd 6:0:0:4: [sde] 10742171648 512-byte logical blocks: (5.49 TB/5.00 TiB)
[ 26.124773] sd 5:0:0:1: [sdf] 7812499389 512-byte logical blocks: (3.99 TB/3.63 TiB)
[ 26.124777] sd 6:0:0:4: alua: No target port descriptors found
[ 26.124779] sd 6:0:0:4: alua: Attach failed (-22)
[ 26.124780] sd 6:0:0:4: failed to add device handler: -22
[ 26.125182] sd 5:0:0:1: [sdf] Write Protect is off
[ 26.125184] sd 5:0:0:1: [sdf] Mode Sense: 43 00 10 08
[ 26.125217] sd 6:0:0:4: [sde] Write Protect is off
[ 26.125220] sd 6:0:0:4: [sde] Mode Sense: 43 00 10 08
[ 26.125306] sd 5:0:0:1: [sdf] Write cache: enabled, read cache: enabled, supports DPO and FUA
[ 26.125512] sd 6:0:0:4: [sde] Write cache: enabled, read cache: enabled, supports DPO and FUA
[ 26.129633] sdf: sdf1
[ 26.130637] sd 5:0:0:1: [sdf] Attached SCSI disk
[ 26.144377] ixgbe 0000:04:00.0: registered PHC device on enp4s0f0
[ 26.149072] sdc: sdc1
[ 26.150434] sd 3:0:0:2: [sdc] Attached SCSI disk
[ 26.190709] sdd: sdd1 sdd2
[ 26.193348] sd 4:0:0:3: [sdd] Attached SCSI disk
[ 26.230515] sde: sde1
[ 26.231674] sd 6:0:0:4: [sde] Attached SCSI disk
[ 26.231987] sd 6:0:0:4: [sde] Synchronizing SCSI cache
[ 26.232021] sd 5:0:0:1: [sdf] Synchronizing SCSI cache
[ 26.233212] sd 3:0:0:2: [sdc] Synchronizing SCSI cache
[ 26.233440] sd 4:0:0:3: [sdd] Synchronizing SCSI cache
[ 26.236755] Buffer I/O error on dev sdc, logical block 2563476132, async page read
[ 26.238897] Buffer I/O error on dev sdd, logical block 1220703182, async page read
[ 26.245773] ixgbe 0000:04:00.1: SR-IOV enabled with 8 VFs
[ 26.245775] ixgbe 0000:04:00.1: configure port vlans to keep your VFs secure
[ 26.274544] scsi 6:0:0:0: Unexpected response from lun 4 while scanning, scan aborted
[ 26.283173] scsi 3:0:0:0: Unexpected response from lun 2 while scanning, scan aborted
[ 26.288571] scsi 4:0:0:0: Unexpected response from lun 3 while scanning, scan aborted
[ 26.288618] scsi 5:0:0:0: Unexpected response from lun 1 while scanning, scan aborted
Second traceback is gone too, but still no luck attaching local iscsi targets either.
[ 639.148875] TARGET_CORE[iSCSI]: Expected Transfer Length: 264 does not match SCSI CDB Length: 8 for SAM Opcode: 0x12
[ 639.148911] sd 7:0:0:0: [sdc] 115343360 512-byte logical blocks: (59.0 GB/55.0 GiB)
[ 639.148925] sd 7:0:0:0: alua: No target port descriptors found
[ 639.148928] sd 7:0:0:0: alua: Attach failed (-22)
[ 639.149186] sd 7:0:0:0: [sdc] Write Protect is off
[ 639.149188] sd 7:0:0:0: [sdc] Mode Sense: 43 00 10 08
[ 639.149279] sd 7:0:0:0: [sdc] Write cache: enabled, read cache: enabled, supports DPO and FUA
[ 639.149298] iSCSI/iqn.1994-05.com.redhat:cf7f1fafca4b: Unsupported SCSI Opcode 0xa3, sending CHECK_CONDITION.
[ 639.149530] sd 7:0:0:0: failed to add device handler: -22
[ 639.154762] sd 7:0:0:0: [sdc] Attached SCSI disk
[ 639.154857] sd 7:0:0:0: [sdc] Synchronizing SCSI cache
[ 655.279047] scsi 7:0:0:0: Direct-Access LIO-ORG IBLOCK 4.0 PQ: 0 ANSI: 5
[ 655.279397] sd 7:0:0:0: alua: supports implicit and explicit TPGS
[ 655.279503] TARGET_CORE[iSCSI]: Expected Transfer Length: 264 does not match SCSI CDB Length: 8 for SAM Opcode: 0x12
[ 655.279533] sd 7:0:0:0: alua: No target port descriptors found
[ 655.279535] sd 7:0:0:0: alua: Attach failed (-22)
[ 655.279587] sd 7:0:0:0: [sdc] 115343360 512-byte logical blocks: (59.0 GB/55.0 GiB)
[ 655.279848] sd 7:0:0:0: [sdc] Write Protect is off
[ 655.279849] sd 7:0:0:0: [sdc] Mode Sense: 43 00 10 08
[ 655.279981] sd 7:0:0:0: [sdc] Write cache: enabled, read cache: enabled, supports DPO and FUA
[ 655.280034] iSCSI/iqn.1994-05.com.redhat:cf7f1fafca4b: Unsupported SCSI Opcode 0xa3, sending CHECK_CONDITION.
[ 655.280171] sd 7:0:0:0: failed to add device handler: -22
[ 655.286008] sd 7:0:0:0: [sdc] Attached SCSI disk
[ 655.286132] sd 7:0:0:0: [sdc] Synchronizing SCSI cache
Serguei Bezverkhi,
TECHNICAL LEADER.SERVICES
Global SP Services
sbezverk@cisco.com
Phone: +1 416 306 7312
Mobile: +1 514 234 7374
CCIE (R&S,SP,Sec) - #9527
Cisco.com
Think before you print.
This email may contain confidential and privileged material for the sole use of the intended recipient. Any review, use, distribution or disclosure by others is strictly prohibited. If you are not the intended recipient (or authorized to receive for the recipient), please contact the sender by reply email and delete all copies of this message.
Please click here for Company Registration Information.
-----Original Message-----
From: Mike Christie [mailto:michaelc@cs.wisc.edu]
Sent: Friday, January 29, 2016 2:27 PM
To: Serguei Bezverkhi (sbezverk) <sbezverk@cisco.com>
Cc: bugzilla-daemon@bugzilla.kernel.org; linux-scsi@vger.kernel.org
Subject: Re: [Bug 111441] New: iscsi fails to attach to targets
On 01/29/2016 01:11 PM, Serguei Bezverkhi (sbezverk) wrote:
> If you send me the diff for your patch, I will build new kernel myself.
>
Bugzilla must be messing something up. I attached to one of the previous mails. Attaching it here again.
Email me offlist and without bugzilla if you do not get it here.
The patch will fix the syfs bug ons you are hitting.
I am not sure if it will fix the genhd one. We can deal with that one next if it is a different issue.
> Serguei
>
>
> Serguei Bezverkhi,
> TECHNICAL LEADER.SERVICES
> Global SP Services
> sbezverk@cisco.com
> Phone: +1 416 306 7312
> Mobile: +1 514 234 7374
>
> CCIE (R&S,SP,Sec) - #9527
>
> Cisco.com
>
>
>
> Think before you print.
> This email may contain confidential and privileged material for the sole use of the intended recipient. Any review, use, distribution or disclosure by others is strictly prohibited. If you are not the intended recipient (or authorized to receive for the recipient), please contact the sender by reply email and delete all copies of this message.
> Please click here for Company Registration Information.
>
>
>
>
> -----Original Message-----
> From: Michael Christie [mailto:michaelc@cs.wisc.edu]
> Sent: Friday, January 29, 2016 2:09 PM
> To: Serguei Bezverkhi (sbezverk) <sbezverk@cisco.com>
> Cc: bugzilla-daemon@bugzilla.kernel.org; linux-scsi@vger.kernel.org
> Subject: Re: [Bug 111441] New: iscsi fails to attach to targets
>
>
>> On Jan 29, 2016, at 6:04 AM, Serguei Bezverkhi (sbezverk) <sbezverk@cisco.com> wrote:
>>
>> Actually this server uses both cases: Local taregts (since it is OpenStack server) and remote targets as it tries to mount 4 remotefile systems.
>>
>> You are correct, I always use the same box I just change the kernel it is using to boot. No other changes to the environment. I do not mind to load a test kernel without that suspected patch, just get me the RPM.
>>
>
> I do not know what you mean. I think the patch I sent will fix the sysfs errors caused due to alua not being setup properly on your system and scsi_dh_alua failing to attach. That patch should be applied to the 4.4 upstream kernel. Are you saying you want me to make you a kernel rpm?
> --
> To unsubscribe from this list: send the line "unsubscribe linux-scsi"
> in the body of a message to majordomo@vger.kernel.org More majordomo
> info at http://vger.kernel.org/majordomo-info.html
>
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 46+ messages in thread
* Re: [Bug 111441] New: iscsi fails to attach to targets
2016-01-29 22:21 ` Serguei Bezverkhi (sbezverk)
@ 2016-01-29 23:32 ` Mike Christie
2016-01-30 7:38 ` Nicholas A. Bellinger
` (2 more replies)
0 siblings, 3 replies; 46+ messages in thread
From: Mike Christie @ 2016-01-29 23:32 UTC (permalink / raw)
To: Serguei Bezverkhi (sbezverk)
Cc: bugzilla-daemon@bugzilla.kernel.org, linux-scsi@vger.kernel.org,
Christoph Hellwig, Hannes Reinecke
On 01/29/2016 04:21 PM, Serguei Bezverkhi (sbezverk) wrote:
> HI Mike,
>
> I tried your patch and it is has eliminated first traceback but I still do not see my remote targets.
>
That is sort of expected. Your target is not setup for ALUA properly. It
says it supports ALUA, but when scsi_dh_alua asks about the ports it is
reporting there are none. Ccing the people that made the patch that
added the issue and own the code.
Hey Christoph and Hannes,
The dh/alua changes that added this:
error = scsi_dh_add_device(sdev);
if (error) {
sdev_printk(KERN_INFO, sdev,
"failed to add device handler: %d\n",
error);
return error;
}
to scsi_sysfs_add_sdev are adding a regression.
1. If that fails, then we forget to do device_del before doing the
return. My patch in this thread added that back, so we do not see the
sysfs oopses anymore. But.....
2. It looks like in older kernels, we would allow misconfigured targets
like this one to still setup devices. Do we want that old behavior back?
Should we just ignore the return value from scsi_dh_add_device above?
Note that in this case, it is LIO so it can be easily fixed on the
target side by just setting it up properly. I do not think other targets
would hit this type of issue.
>
> Here is dmesg
>
> [ 26.103812] scsi 3:0:0:2: Direct-Access LIO-ORG san-disk-2 4.0 PQ: 0 ANSI: 5
> [ 26.104338] sd 3:0:0:2: alua: supports implicit and explicit TPGS
> [ 26.104549] sd 3:0:0:2: alua: No target port descriptors found
> [ 26.104552] sd 3:0:0:2: alua: Attach failed (-22)
> [ 26.104554] sd 3:0:0:2: failed to add device handler: -22
> [ 26.104578] sd 3:0:0:2: [sdc] 20507809792 512-byte logical blocks: (10.4 TB/9.54 TiB)
> [ 26.104905] sd 3:0:0:2: [sdc] Write Protect is off
> [ 26.104908] sd 3:0:0:2: [sdc] Mode Sense: 43 00 10 08
> [ 26.105036] sd 3:0:0:2: [sdc] Write cache: enabled, read cache: enabled, supports DPO and FUA
> [ 26.112294] scsi host6: iSCSI Initiator over TCP/IP
> [ 26.113279] scsi 4:0:0:3: Direct-Access LIO-ORG san-disk-3 4.0 PQ: 0 ANSI: 5
> [ 26.113690] sd 4:0:0:3: alua: supports implicit and explicit TPGS
> [ 26.113877] sd 4:0:0:3: [sdd] 9765625856 512-byte logical blocks: (5.00 TB/4.54 TiB)
> [ 26.113948] sd 4:0:0:3: alua: No target port descriptors found
> [ 26.113951] sd 4:0:0:3: alua: Attach failed (-22)
> [ 26.113953] sd 4:0:0:3: failed to add device handler: -22
> [ 26.114292] sd 4:0:0:3: [sdd] Write Protect is off
> [ 26.114295] sd 4:0:0:3: [sdd] Mode Sense: 43 00 10 08
> [ 26.114503] sd 4:0:0:3: [sdd] Write cache: enabled, read cache: enabled, supports DPO and FUA
> [ 26.123875] scsi 5:0:0:1: Direct-Access LIO-ORG san-disk-1 4.0 PQ: 0 ANSI: 5
> [ 26.123911] scsi 6:0:0:4: Direct-Access LIO-ORG san-disk-4 4.0 PQ: 0 ANSI: 5
> [ 26.124452] sd 6:0:0:4: alua: supports implicit and explicit TPGS
> [ 26.124453] sd 5:0:0:1: alua: supports implicit and explicit TPGS
> [ 26.124724] sd 5:0:0:1: alua: No target port descriptors found
> [ 26.124727] sd 5:0:0:1: alua: Attach failed (-22)
> [ 26.124728] sd 5:0:0:1: failed to add device handler: -22
> [ 26.124736] sd 6:0:0:4: [sde] 10742171648 512-byte logical blocks: (5.49 TB/5.00 TiB)
> [ 26.124773] sd 5:0:0:1: [sdf] 7812499389 512-byte logical blocks: (3.99 TB/3.63 TiB)
> [ 26.124777] sd 6:0:0:4: alua: No target port descriptors found
> [ 26.124779] sd 6:0:0:4: alua: Attach failed (-22)
> [ 26.124780] sd 6:0:0:4: failed to add device handler: -22
> [ 26.125182] sd 5:0:0:1: [sdf] Write Protect is off
> [ 26.125184] sd 5:0:0:1: [sdf] Mode Sense: 43 00 10 08
> [ 26.125217] sd 6:0:0:4: [sde] Write Protect is off
> [ 26.125220] sd 6:0:0:4: [sde] Mode Sense: 43 00 10 08
> [ 26.125306] sd 5:0:0:1: [sdf] Write cache: enabled, read cache: enabled, supports DPO and FUA
> [ 26.125512] sd 6:0:0:4: [sde] Write cache: enabled, read cache: enabled, supports DPO and FUA
> [ 26.129633] sdf: sdf1
> [ 26.130637] sd 5:0:0:1: [sdf] Attached SCSI disk
> [ 26.144377] ixgbe 0000:04:00.0: registered PHC device on enp4s0f0
> [ 26.149072] sdc: sdc1
> [ 26.150434] sd 3:0:0:2: [sdc] Attached SCSI disk
> [ 26.190709] sdd: sdd1 sdd2
> [ 26.193348] sd 4:0:0:3: [sdd] Attached SCSI disk
> [ 26.230515] sde: sde1
> [ 26.231674] sd 6:0:0:4: [sde] Attached SCSI disk
> [ 26.231987] sd 6:0:0:4: [sde] Synchronizing SCSI cache
> [ 26.232021] sd 5:0:0:1: [sdf] Synchronizing SCSI cache
> [ 26.233212] sd 3:0:0:2: [sdc] Synchronizing SCSI cache
> [ 26.233440] sd 4:0:0:3: [sdd] Synchronizing SCSI cache
> [ 26.236755] Buffer I/O error on dev sdc, logical block 2563476132, async page read
> [ 26.238897] Buffer I/O error on dev sdd, logical block 1220703182, async page read
> [ 26.245773] ixgbe 0000:04:00.1: SR-IOV enabled with 8 VFs
> [ 26.245775] ixgbe 0000:04:00.1: configure port vlans to keep your VFs secure
> [ 26.274544] scsi 6:0:0:0: Unexpected response from lun 4 while scanning, scan aborted
> [ 26.283173] scsi 3:0:0:0: Unexpected response from lun 2 while scanning, scan aborted
> [ 26.288571] scsi 4:0:0:0: Unexpected response from lun 3 while scanning, scan aborted
> [ 26.288618] scsi 5:0:0:0: Unexpected response from lun 1 while scanning, scan aborted
>
>
> Second traceback is gone too, but still no luck attaching local iscsi targets either.
>
>
> [ 639.148875] TARGET_CORE[iSCSI]: Expected Transfer Length: 264 does not match SCSI CDB Length: 8 for SAM Opcode: 0x12
> [ 639.148911] sd 7:0:0:0: [sdc] 115343360 512-byte logical blocks: (59.0 GB/55.0 GiB)
> [ 639.148925] sd 7:0:0:0: alua: No target port descriptors found
> [ 639.148928] sd 7:0:0:0: alua: Attach failed (-22)
> [ 639.149186] sd 7:0:0:0: [sdc] Write Protect is off
> [ 639.149188] sd 7:0:0:0: [sdc] Mode Sense: 43 00 10 08
> [ 639.149279] sd 7:0:0:0: [sdc] Write cache: enabled, read cache: enabled, supports DPO and FUA
> [ 639.149298] iSCSI/iqn.1994-05.com.redhat:cf7f1fafca4b: Unsupported SCSI Opcode 0xa3, sending CHECK_CONDITION.
> [ 639.149530] sd 7:0:0:0: failed to add device handler: -22
> [ 639.154762] sd 7:0:0:0: [sdc] Attached SCSI disk
> [ 639.154857] sd 7:0:0:0: [sdc] Synchronizing SCSI cache
> [ 655.279047] scsi 7:0:0:0: Direct-Access LIO-ORG IBLOCK 4.0 PQ: 0 ANSI: 5
> [ 655.279397] sd 7:0:0:0: alua: supports implicit and explicit TPGS
> [ 655.279503] TARGET_CORE[iSCSI]: Expected Transfer Length: 264 does not match SCSI CDB Length: 8 for SAM Opcode: 0x12
> [ 655.279533] sd 7:0:0:0: alua: No target port descriptors found
> [ 655.279535] sd 7:0:0:0: alua: Attach failed (-22)
> [ 655.279587] sd 7:0:0:0: [sdc] 115343360 512-byte logical blocks: (59.0 GB/55.0 GiB)
> [ 655.279848] sd 7:0:0:0: [sdc] Write Protect is off
> [ 655.279849] sd 7:0:0:0: [sdc] Mode Sense: 43 00 10 08
> [ 655.279981] sd 7:0:0:0: [sdc] Write cache: enabled, read cache: enabled, supports DPO and FUA
> [ 655.280034] iSCSI/iqn.1994-05.com.redhat:cf7f1fafca4b: Unsupported SCSI Opcode 0xa3, sending CHECK_CONDITION.
> [ 655.280171] sd 7:0:0:0: failed to add device handler: -22
> [ 655.286008] sd 7:0:0:0: [sdc] Attached SCSI disk
> [ 655.286132] sd 7:0:0:0: [sdc] Synchronizing SCSI cache
>
>
> Serguei Bezverkhi,
> TECHNICAL LEADER.SERVICES
> Global SP Services
> sbezverk@cisco.com
> Phone: +1 416 306 7312
> Mobile: +1 514 234 7374
>
> CCIE (R&S,SP,Sec) - #9527
>
> Cisco.com
>
>
>
> Think before you print.
> This email may contain confidential and privileged material for the sole use of the intended recipient. Any review, use, distribution or disclosure by others is strictly prohibited. If you are not the intended recipient (or authorized to receive for the recipient), please contact the sender by reply email and delete all copies of this message.
> Please click here for Company Registration Information.
>
>
>
>
> -----Original Message-----
> From: Mike Christie [mailto:michaelc@cs.wisc.edu]
> Sent: Friday, January 29, 2016 2:27 PM
> To: Serguei Bezverkhi (sbezverk) <sbezverk@cisco.com>
> Cc: bugzilla-daemon@bugzilla.kernel.org; linux-scsi@vger.kernel.org
> Subject: Re: [Bug 111441] New: iscsi fails to attach to targets
>
>
>
> On 01/29/2016 01:11 PM, Serguei Bezverkhi (sbezverk) wrote:
>> If you send me the diff for your patch, I will build new kernel myself.
>>
>
> Bugzilla must be messing something up. I attached to one of the previous mails. Attaching it here again.
>
> Email me offlist and without bugzilla if you do not get it here.
>
> The patch will fix the syfs bug ons you are hitting.
>
> I am not sure if it will fix the genhd one. We can deal with that one next if it is a different issue.
>
>
>> Serguei
>>
>>
>> Serguei Bezverkhi,
>> TECHNICAL LEADER.SERVICES
>> Global SP Services
>> sbezverk@cisco.com
>> Phone: +1 416 306 7312
>> Mobile: +1 514 234 7374
>>
>> CCIE (R&S,SP,Sec) - #9527
>>
>> Cisco.com
>>
>>
>>
>> Think before you print.
>> This email may contain confidential and privileged material for the sole use of the intended recipient. Any review, use, distribution or disclosure by others is strictly prohibited. If you are not the intended recipient (or authorized to receive for the recipient), please contact the sender by reply email and delete all copies of this message.
>> Please click here for Company Registration Information.
>>
>>
>>
>>
>> -----Original Message-----
>> From: Michael Christie [mailto:michaelc@cs.wisc.edu]
>> Sent: Friday, January 29, 2016 2:09 PM
>> To: Serguei Bezverkhi (sbezverk) <sbezverk@cisco.com>
>> Cc: bugzilla-daemon@bugzilla.kernel.org; linux-scsi@vger.kernel.org
>> Subject: Re: [Bug 111441] New: iscsi fails to attach to targets
>>
>>
>>> On Jan 29, 2016, at 6:04 AM, Serguei Bezverkhi (sbezverk) <sbezverk@cisco.com> wrote:
>>>
>>> Actually this server uses both cases: Local taregts (since it is OpenStack server) and remote targets as it tries to mount 4 remotefile systems.
>>>
>>> You are correct, I always use the same box I just change the kernel it is using to boot. No other changes to the environment. I do not mind to load a test kernel without that suspected patch, just get me the RPM.
>>>
>>
>> I do not know what you mean. I think the patch I sent will fix the sysfs errors caused due to alua not being setup properly on your system and scsi_dh_alua failing to attach. That patch should be applied to the 4.4 upstream kernel. Are you saying you want me to make you a kernel rpm?
>> --
>> To unsubscribe from this list: send the line "unsubscribe linux-scsi"
>> in the body of a message to majordomo@vger.kernel.org More majordomo
>> info at http://vger.kernel.org/majordomo-info.html
>>
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
^ permalink raw reply [flat|nested] 46+ messages in thread* Re: [Bug 111441] New: iscsi fails to attach to targets
2016-01-29 23:32 ` Mike Christie
@ 2016-01-30 7:38 ` Nicholas A. Bellinger
2016-02-01 16:55 ` Mike Christie
2016-02-02 18:09 ` Christoph Hellwig
2016-02-22 0:45 ` Serguei Bezverkhi (sbezverk)
2 siblings, 1 reply; 46+ messages in thread
From: Nicholas A. Bellinger @ 2016-01-30 7:38 UTC (permalink / raw)
To: Mike Christie
Cc: Serguei Bezverkhi (sbezverk), bugzilla-daemon@bugzilla.kernel.org,
linux-scsi@vger.kernel.org, Christoph Hellwig, Hannes Reinecke
On Fri, 2016-01-29 at 17:32 -0600, Mike Christie wrote:
> On 01/29/2016 04:21 PM, Serguei Bezverkhi (sbezverk) wrote:
> > HI Mike,
> >
> > I tried your patch and it is has eliminated first traceback but I still do not see my remote targets.
> >
>
> That is sort of expected. Your target is not setup for ALUA properly. It
> says it supports ALUA, but when scsi_dh_alua asks about the ports it is
> reporting there are none. Ccing the people that made the patch that
> added the issue and own the code.
>
> Hey Christoph and Hannes,
>
> The dh/alua changes that added this:
>
> error = scsi_dh_add_device(sdev);
> if (error) {
> sdev_printk(KERN_INFO, sdev,
> "failed to add device handler: %d\n",
> error);
> return error;
> }
>
> to scsi_sysfs_add_sdev are adding a regression.
>
> 1. If that fails, then we forget to do device_del before doing the
> return. My patch in this thread added that back, so we do not see the
> sysfs oopses anymore. But.....
>
> 2. It looks like in older kernels, we would allow misconfigured targets
> like this one to still setup devices. Do we want that old behavior back?
> Should we just ignore the return value from scsi_dh_add_device above?
> Note that in this case, it is LIO so it can be easily fixed on the
> target side by just setting it up properly. I do not think other targets
> would hit this type of issue.
>
Btw, what does misconfigured mean here wrt target ALUA..?
^ permalink raw reply [flat|nested] 46+ messages in thread* Re: [Bug 111441] New: iscsi fails to attach to targets
2016-01-30 7:38 ` Nicholas A. Bellinger
@ 2016-02-01 16:55 ` Mike Christie
2016-02-02 16:41 ` Serguei Bezverkhi (sbezverk)
2016-02-02 22:56 ` Nicholas A. Bellinger
0 siblings, 2 replies; 46+ messages in thread
From: Mike Christie @ 2016-02-01 16:55 UTC (permalink / raw)
To: Nicholas A. Bellinger
Cc: Serguei Bezverkhi (sbezverk), bugzilla-daemon@bugzilla.kernel.org,
linux-scsi@vger.kernel.org, Christoph Hellwig, Hannes Reinecke
On 01/30/2016 01:38 AM, Nicholas A. Bellinger wrote:
> On Fri, 2016-01-29 at 17:32 -0600, Mike Christie wrote:
>> On 01/29/2016 04:21 PM, Serguei Bezverkhi (sbezverk) wrote:
>>> HI Mike,
>>>
>>> I tried your patch and it is has eliminated first traceback but I still do not see my remote targets.
>>>
>>
>> That is sort of expected. Your target is not setup for ALUA properly. It
>> says it supports ALUA, but when scsi_dh_alua asks about the ports it is
>> reporting there are none. Ccing the people that made the patch that
>> added the issue and own the code.
>>
>> Hey Christoph and Hannes,
>>
>> The dh/alua changes that added this:
>>
>> error = scsi_dh_add_device(sdev);
>> if (error) {
>> sdev_printk(KERN_INFO, sdev,
>> "failed to add device handler: %d\n",
>> error);
>> return error;
>> }
>>
>> to scsi_sysfs_add_sdev are adding a regression.
>>
>> 1. If that fails, then we forget to do device_del before doing the
>> return. My patch in this thread added that back, so we do not see the
>> sysfs oopses anymore. But.....
>>
>> 2. It looks like in older kernels, we would allow misconfigured targets
>> like this one to still setup devices. Do we want that old behavior back?
>> Should we just ignore the return value from scsi_dh_add_device above?
>> Note that in this case, it is LIO so it can be easily fixed on the
>> target side by just setting it up properly. I do not think other targets
>> would hit this type of issue.
>>
>
> Btw, what does misconfigured mean here wrt target ALUA..?
[ 25.833195] sd 6:0:0:4: alua: supports implicit and explicit TPGS
[ 25.833360] sd 6:0:0:4: alua: No target port descriptors found
[ 25.833363] sd 6:0:0:4: alua: Attach failed (-22)
[ 25.833365] sd 6:0:0:4: failed to add device handler: -22
He has LIO configured to report it supports implicit/explicit ALUA, but
the ports do not seem to be configured.
For the LIO config side, are his LUNs just not in a the default_lu_gp or
any other group?
^ permalink raw reply [flat|nested] 46+ messages in thread* RE: [Bug 111441] New: iscsi fails to attach to targets
2016-02-01 16:55 ` Mike Christie
@ 2016-02-02 16:41 ` Serguei Bezverkhi (sbezverk)
2016-02-02 22:56 ` Nicholas A. Bellinger
1 sibling, 0 replies; 46+ messages in thread
From: Serguei Bezverkhi (sbezverk) @ 2016-02-02 16:41 UTC (permalink / raw)
To: Mike Christie, Nicholas A. Bellinger
Cc: bugzilla-daemon@bugzilla.kernel.org, linux-scsi@vger.kernel.org,
Christoph Hellwig, Hannes Reinecke
Hello,
Any chance we could move forward with this investigation? I still cannot attach to any remove iscsi targets with either 4.4.0 or 4.4.1 kernels.
Thank you
Serguei
-----Original Message-----
From: Mike Christie [mailto:michaelc@cs.wisc.edu]
Sent: Monday, February 01, 2016 11:55 AM
To: Nicholas A. Bellinger <nab@linux-iscsi.org>
Cc: Serguei Bezverkhi (sbezverk) <sbezverk@cisco.com>; bugzilla-daemon@bugzilla.kernel.org; linux-scsi@vger.kernel.org; Christoph Hellwig <hch@infradead.org>; Hannes Reinecke <hare@suse.de>
Subject: Re: [Bug 111441] New: iscsi fails to attach to targets
On 01/30/2016 01:38 AM, Nicholas A. Bellinger wrote:
> On Fri, 2016-01-29 at 17:32 -0600, Mike Christie wrote:
>> On 01/29/2016 04:21 PM, Serguei Bezverkhi (sbezverk) wrote:
>>> HI Mike,
>>>
>>> I tried your patch and it is has eliminated first traceback but I still do not see my remote targets.
>>>
>>
>> That is sort of expected. Your target is not setup for ALUA properly.
>> It says it supports ALUA, but when scsi_dh_alua asks about the ports
>> it is reporting there are none. Ccing the people that made the patch
>> that added the issue and own the code.
>>
>> Hey Christoph and Hannes,
>>
>> The dh/alua changes that added this:
>>
>> error = scsi_dh_add_device(sdev);
>> if (error) {
>> sdev_printk(KERN_INFO, sdev,
>> "failed to add device handler: %d\n",
>> error);
>> return error;
>> }
>>
>> to scsi_sysfs_add_sdev are adding a regression.
>>
>> 1. If that fails, then we forget to do device_del before doing the
>> return. My patch in this thread added that back, so we do not see the
>> sysfs oopses anymore. But.....
>>
>> 2. It looks like in older kernels, we would allow misconfigured
>> targets like this one to still setup devices. Do we want that old behavior back?
>> Should we just ignore the return value from scsi_dh_add_device above?
>> Note that in this case, it is LIO so it can be easily fixed on the
>> target side by just setting it up properly. I do not think other
>> targets would hit this type of issue.
>>
>
> Btw, what does misconfigured mean here wrt target ALUA..?
[ 25.833195] sd 6:0:0:4: alua: supports implicit and explicit TPGS
[ 25.833360] sd 6:0:0:4: alua: No target port descriptors found
[ 25.833363] sd 6:0:0:4: alua: Attach failed (-22)
[ 25.833365] sd 6:0:0:4: failed to add device handler: -22
He has LIO configured to report it supports implicit/explicit ALUA, but the ports do not seem to be configured.
For the LIO config side, are his LUNs just not in a the default_lu_gp or any other group?
^ permalink raw reply [flat|nested] 46+ messages in thread* Re: [Bug 111441] New: iscsi fails to attach to targets
2016-02-01 16:55 ` Mike Christie
2016-02-02 16:41 ` Serguei Bezverkhi (sbezverk)
@ 2016-02-02 22:56 ` Nicholas A. Bellinger
2016-02-02 23:21 ` Serguei Bezverkhi (sbezverk)
2016-02-08 8:01 ` Nicholas A. Bellinger
1 sibling, 2 replies; 46+ messages in thread
From: Nicholas A. Bellinger @ 2016-02-02 22:56 UTC (permalink / raw)
To: Mike Christie
Cc: Serguei Bezverkhi (sbezverk), bugzilla-daemon@bugzilla.kernel.org,
linux-scsi@vger.kernel.org, Christoph Hellwig, Hannes Reinecke
On Mon, 2016-02-01 at 10:55 -0600, Mike Christie wrote:
> On 01/30/2016 01:38 AM, Nicholas A. Bellinger wrote:
> > On Fri, 2016-01-29 at 17:32 -0600, Mike Christie wrote:
> >> On 01/29/2016 04:21 PM, Serguei Bezverkhi (sbezverk) wrote:
> >>> HI Mike,
> >>>
> >>> I tried your patch and it is has eliminated first traceback but I still do not see my remote targets.
> >>>
> >>
> >> That is sort of expected. Your target is not setup for ALUA properly. It
> >> says it supports ALUA, but when scsi_dh_alua asks about the ports it is
> >> reporting there are none. Ccing the people that made the patch that
> >> added the issue and own the code.
> >>
> >> Hey Christoph and Hannes,
> >>
> >> The dh/alua changes that added this:
> >>
> >> error = scsi_dh_add_device(sdev);
> >> if (error) {
> >> sdev_printk(KERN_INFO, sdev,
> >> "failed to add device handler: %d\n",
> >> error);
> >> return error;
> >> }
> >>
> >> to scsi_sysfs_add_sdev are adding a regression.
> >>
> >> 1. If that fails, then we forget to do device_del before doing the
> >> return. My patch in this thread added that back, so we do not see the
> >> sysfs oopses anymore. But.....
> >>
> >> 2. It looks like in older kernels, we would allow misconfigured targets
> >> like this one to still setup devices. Do we want that old behavior back?
> >> Should we just ignore the return value from scsi_dh_add_device above?
> >> Note that in this case, it is LIO so it can be easily fixed on the
> >> target side by just setting it up properly. I do not think other targets
> >> would hit this type of issue.
> >>
> >
> > Btw, what does misconfigured mean here wrt target ALUA..?
>
> [ 25.833195] sd 6:0:0:4: alua: supports implicit and explicit TPGS
> [ 25.833360] sd 6:0:0:4: alua: No target port descriptors found
> [ 25.833363] sd 6:0:0:4: alua: Attach failed (-22)
> [ 25.833365] sd 6:0:0:4: failed to add device handler: -22
>
Strange, this hasn't changed in forever on the target side..
> He has LIO configured to report it supports implicit/explicit ALUA, but
> the ports do not seem to be configured.
>
> For the LIO config side, are his LUNs just not in a the default_lu_gp or
> any other group?
So every non-PSCSI backend device becomes part of default_lu_gp +
default_tg_pt_gp and automatically shows up in EVPD=0x83, without user
needing to do any additional configuration.
Here's what the output looks like:
root@haakon3:/usr/src/target-pending.git# sg_inq -Hi /dev/sdb
VPD INQUIRY: Device Identification page
<SNIP>
Designation descriptor number 3, descriptor length: 8
transport: Serial Attached SCSI Protocol (SPL-2)
designator_type: Relative target port, code_set: Binary
associated with the target port
designator header(hex): 61 94 00 04
designator:
00 00 00 00 02 ....
Designation descriptor number 4, descriptor length: 8
transport: Serial Attached SCSI Protocol (SPL-2)
designator_type: Target port group, code_set: Binary
associated with the target port
designator header(hex): 61 95 00 04
designator:
00 00 00 00 00 ....
Designation descriptor number 5, descriptor length: 8
designator_type: Logical unit group, code_set: Binary
associated with the addressed logical unit
designator header(hex): 01 06 00 04
designator:
00 00 00 00 00 ....
<SNIP>
So AFAICT, the relative target port, target port group, and logical unit
group being returned from target on v4.5-rc1 code looks correct.
Serguei, can you confirm with 'sg_inq -Hi /dev/sdX' output on your side
with the v3.10 based target..?
AFAICT the parsing in scsi_vpd_tpg_id() from commit a8aa3978 looks
correct too.
Hannes, any ideas..?
^ permalink raw reply [flat|nested] 46+ messages in thread* RE: [Bug 111441] New: iscsi fails to attach to targets
2016-02-02 22:56 ` Nicholas A. Bellinger
@ 2016-02-02 23:21 ` Serguei Bezverkhi (sbezverk)
2016-02-08 8:01 ` Nicholas A. Bellinger
1 sibling, 0 replies; 46+ messages in thread
From: Serguei Bezverkhi (sbezverk) @ 2016-02-02 23:21 UTC (permalink / raw)
To: Nicholas A. Bellinger, Mike Christie
Cc: bugzilla-daemon@bugzilla.kernel.org, linux-scsi@vger.kernel.org,
Christoph Hellwig, Hannes Reinecke
Here you go, same output to compare for 4.4.1 and 3.10.0
Linux 4.4.1 #1 SMP Tue Feb 2 16:15:36 EST 2016
[root@sbezverk-osp-3 ~(keystone_admin)]# sg_inq -Hi /dev/sdc
VPD INQUIRY: Device Identification page
Designation descriptor number 1, descriptor length: 20
designator_type: NAA, code_set: Binary
associated with the addressed logical unit
designator header(hex): 01 03 00 10
designator:
00 60 01 40 56 5f e9 25 e7 94 a4 20 69 2c 0c b3 c6 `.@V_.%... i,...
Designation descriptor number 2, descriptor length: 60
designator_type: T10 vendor identification, code_set: ASCII
associated with the addressed logical unit
designator header(hex): 02 01 00 38
designator:
00 4c 49 4f 2d 4f 52 47 00 73 61 6e 2d 64 69 73 6b LIO-ORG.san-disk
10 2d 32 3a 36 35 66 65 39 32 35 65 2d 37 39 34 61 -2:65fe925e-794a
20 2d 34 32 30 36 2d 39 32 63 30 2d 63 62 33 63 36 -4206-92c0-cb3c6
30 39 61 35 33 34 39 61 00 9a5349a.
Designation descriptor number 3, descriptor length: 8
transport: Internet SCSI (iSCSI)
designator_type: Relative target port, code_set: Binary
associated with the target port
designator header(hex): 51 94 00 04
designator:
00 00 00 00 01 ....
Designation descriptor number 4, descriptor length: 8
transport: Internet SCSI (iSCSI)
designator_type: Target port group, code_set: Binary
associated with the target port
designator header(hex): 51 95 00 04
designator:
00 00 00 00 00 ....
Designation descriptor number 5, descriptor length: 8
designator_type: Logical unit group, code_set: Binary
associated with the addressed logical unit
designator header(hex): 01 06 00 04
designator:
00 00 00 00 00 ....
Designation descriptor number 6, descriptor length: 80
transport: Internet SCSI (iSCSI)
designator_type: SCSI name string, code_set: UTF-8
associated with the target port
designator header(hex): 53 98 00 4c
designator:
00 69 71 6e 2e 32 30 30 33 2d 30 31 2e 6f 72 67 2e iqn.2003-01.org.
10 6c 69 6e 75 78 2d 69 73 63 73 69 2e 73 62 65 7a linux-iscsi.sbez
20 76 65 72 6b 2d 73 61 6e 2d 31 2e 78 38 36 36 34 verk-san-1.x8664
30 3a 73 6e 2e 33 64 66 63 66 66 62 64 66 66 34 33 :sn.3dfcffbdff43
40 2c 74 2c 30 78 30 30 30 31 00 00 00 ,t,0x0001...
Designation descriptor number 7, descriptor length: 72
transport: Internet SCSI (iSCSI)
designator_type: SCSI name string, code_set: UTF-8
associated with the target device that contains addressed lu
designator header(hex): 53 a8 00 44
designator:
00 69 71 6e 2e 32 30 30 33 2d 30 31 2e 6f 72 67 2e iqn.2003-01.org.
10 6c 69 6e 75 78 2d 69 73 63 73 69 2e 73 62 65 7a linux-iscsi.sbez
20 76 65 72 6b 2d 73 61 6e 2d 31 2e 78 38 36 36 34 verk-san-1.x8664
30 3a 73 6e 2e 33 64 66 63 66 66 62 64 66 66 34 33 :sn.3dfcffbdff43
40 00 00 00 00
Linux 3.10.0-327.4.5.el7.x86_64 #1 SMP Thu Jan 21 04:10:29 EST 2016
[root@sbezverk-osp-3 ~(keystone_admin)]# sg_inq -Hi /dev/sdc
VPD INQUIRY: Device Identification page
Designation descriptor number 1, descriptor length: 20
designator_type: NAA, code_set: Binary
associated with the addressed logical unit
designator header(hex): 01 03 00 10
designator:
00 60 01 40 56 5f e9 25 e7 94 a4 20 69 2c 0c b3 c6 `.@V_.%... i,...
Designation descriptor number 2, descriptor length: 60
designator_type: T10 vendor identification, code_set: ASCII
associated with the addressed logical unit
designator header(hex): 02 01 00 38
designator:
00 4c 49 4f 2d 4f 52 47 00 73 61 6e 2d 64 69 73 6b LIO-ORG.san-disk
10 2d 32 3a 36 35 66 65 39 32 35 65 2d 37 39 34 61 -2:65fe925e-794a
20 2d 34 32 30 36 2d 39 32 63 30 2d 63 62 33 63 36 -4206-92c0-cb3c6
30 39 61 35 33 34 39 61 00 9a5349a.
Designation descriptor number 3, descriptor length: 8
transport: Internet SCSI (iSCSI)
designator_type: Relative target port, code_set: Binary
associated with the target port
designator header(hex): 51 94 00 04
designator:
00 00 00 00 01 ....
Designation descriptor number 4, descriptor length: 8
transport: Internet SCSI (iSCSI)
designator_type: Target port group, code_set: Binary
associated with the target port
designator header(hex): 51 95 00 04
designator:
00 00 00 00 00 ....
Designation descriptor number 5, descriptor length: 8
designator_type: Logical unit group, code_set: Binary
associated with the addressed logical unit
designator header(hex): 01 06 00 04
designator:
00 00 00 00 00 ....
Designation descriptor number 6, descriptor length: 80
transport: Internet SCSI (iSCSI)
designator_type: SCSI name string, code_set: UTF-8
associated with the target port
designator header(hex): 53 98 00 4c
designator:
00 69 71 6e 2e 32 30 30 33 2d 30 31 2e 6f 72 67 2e iqn.2003-01.org.
10 6c 69 6e 75 78 2d 69 73 63 73 69 2e 73 62 65 7a linux-iscsi.sbez
20 76 65 72 6b 2d 73 61 6e 2d 31 2e 78 38 36 36 34 verk-san-1.x8664
30 3a 73 6e 2e 33 64 66 63 66 66 62 64 66 66 34 33 :sn.3dfcffbdff43
40 2c 74 2c 30 78 30 30 30 31 00 00 00 ,t,0x0001...
Designation descriptor number 7, descriptor length: 72
transport: Internet SCSI (iSCSI)
designator_type: SCSI name string, code_set: UTF-8
associated with the target device that contains addressed lu
designator header(hex): 53 a8 00 44
designator:
00 69 71 6e 2e 32 30 30 33 2d 30 31 2e 6f 72 67 2e iqn.2003-01.org.
10 6c 69 6e 75 78 2d 69 73 63 73 69 2e 73 62 65 7a linux-iscsi.sbez
20 76 65 72 6b 2d 73 61 6e 2d 31 2e 78 38 36 36 34 verk-san-1.x8664
30 3a 73 6e 2e 33 64 66 63 66 66 62 64 66 66 34 33 :sn.3dfcffbdff43
40 00 00 00 00
Let me know if you need any additional info.
Thank you
Serguei
-----Original Message-----
From: Nicholas A. Bellinger [mailto:nab@linux-iscsi.org]
Sent: Tuesday, February 02, 2016 5:56 PM
To: Mike Christie <michaelc@cs.wisc.edu>
Cc: Serguei Bezverkhi (sbezverk) <sbezverk@cisco.com>; bugzilla-daemon@bugzilla.kernel.org; linux-scsi@vger.kernel.org; Christoph Hellwig <hch@infradead.org>; Hannes Reinecke <hare@suse.de>
Subject: Re: [Bug 111441] New: iscsi fails to attach to targets
On Mon, 2016-02-01 at 10:55 -0600, Mike Christie wrote:
> On 01/30/2016 01:38 AM, Nicholas A. Bellinger wrote:
> > On Fri, 2016-01-29 at 17:32 -0600, Mike Christie wrote:
> >> On 01/29/2016 04:21 PM, Serguei Bezverkhi (sbezverk) wrote:
> >>> HI Mike,
> >>>
> >>> I tried your patch and it is has eliminated first traceback but I still do not see my remote targets.
> >>>
> >>
> >> That is sort of expected. Your target is not setup for ALUA
> >> properly. It says it supports ALUA, but when scsi_dh_alua asks
> >> about the ports it is reporting there are none. Ccing the people
> >> that made the patch that added the issue and own the code.
> >>
> >> Hey Christoph and Hannes,
> >>
> >> The dh/alua changes that added this:
> >>
> >> error = scsi_dh_add_device(sdev);
> >> if (error) {
> >> sdev_printk(KERN_INFO, sdev,
> >> "failed to add device handler:
> >> %d\n", error);
> >> return error;
> >> }
> >>
> >> to scsi_sysfs_add_sdev are adding a regression.
> >>
> >> 1. If that fails, then we forget to do device_del before doing the
> >> return. My patch in this thread added that back, so we do not see
> >> the sysfs oopses anymore. But.....
> >>
> >> 2. It looks like in older kernels, we would allow misconfigured
> >> targets like this one to still setup devices. Do we want that old behavior back?
> >> Should we just ignore the return value from scsi_dh_add_device above?
> >> Note that in this case, it is LIO so it can be easily fixed on the
> >> target side by just setting it up properly. I do not think other
> >> targets would hit this type of issue.
> >>
> >
> > Btw, what does misconfigured mean here wrt target ALUA..?
>
> [ 25.833195] sd 6:0:0:4: alua: supports implicit and explicit TPGS
> [ 25.833360] sd 6:0:0:4: alua: No target port descriptors found
> [ 25.833363] sd 6:0:0:4: alua: Attach failed (-22)
> [ 25.833365] sd 6:0:0:4: failed to add device handler: -22
>
Strange, this hasn't changed in forever on the target side..
> He has LIO configured to report it supports implicit/explicit ALUA,
> but the ports do not seem to be configured.
>
> For the LIO config side, are his LUNs just not in a the default_lu_gp
> or any other group?
So every non-PSCSI backend device becomes part of default_lu_gp + default_tg_pt_gp and automatically shows up in EVPD=0x83, without user needing to do any additional configuration.
Here's what the output looks like:
root@haakon3:/usr/src/target-pending.git# sg_inq -Hi /dev/sdb VPD INQUIRY: Device Identification page
<SNIP>
Designation descriptor number 3, descriptor length: 8
transport: Serial Attached SCSI Protocol (SPL-2)
designator_type: Relative target port, code_set: Binary
associated with the target port
designator header(hex): 61 94 00 04
designator:
00 00 00 00 02 ....
Designation descriptor number 4, descriptor length: 8
transport: Serial Attached SCSI Protocol (SPL-2)
designator_type: Target port group, code_set: Binary
associated with the target port
designator header(hex): 61 95 00 04
designator:
00 00 00 00 00 ....
Designation descriptor number 5, descriptor length: 8
designator_type: Logical unit group, code_set: Binary
associated with the addressed logical unit
designator header(hex): 01 06 00 04
designator:
00 00 00 00 00 ....
<SNIP>
So AFAICT, the relative target port, target port group, and logical unit group being returned from target on v4.5-rc1 code looks correct.
Serguei, can you confirm with 'sg_inq -Hi /dev/sdX' output on your side with the v3.10 based target..?
AFAICT the parsing in scsi_vpd_tpg_id() from commit a8aa3978 looks correct too.
Hannes, any ideas..?
^ permalink raw reply [flat|nested] 46+ messages in thread* Re: [Bug 111441] New: iscsi fails to attach to targets
2016-02-02 22:56 ` Nicholas A. Bellinger
2016-02-02 23:21 ` Serguei Bezverkhi (sbezverk)
@ 2016-02-08 8:01 ` Nicholas A. Bellinger
2016-02-16 19:08 ` Hannes Reinecke
1 sibling, 1 reply; 46+ messages in thread
From: Nicholas A. Bellinger @ 2016-02-08 8:01 UTC (permalink / raw)
To: Hannes Reinecke
Cc: Serguei Bezverkhi (sbezverk), bugzilla-daemon@bugzilla.kernel.org,
linux-scsi@vger.kernel.org, Christoph Hellwig, Hannes Reinecke,
Mike Christie
On Tue, 2016-02-02 at 14:56 -0800, Nicholas A. Bellinger wrote:
> On Mon, 2016-02-01 at 10:55 -0600, Mike Christie wrote:
> > On 01/30/2016 01:38 AM, Nicholas A. Bellinger wrote:
> > > On Fri, 2016-01-29 at 17:32 -0600, Mike Christie wrote:
> > >> On 01/29/2016 04:21 PM, Serguei Bezverkhi (sbezverk) wrote:
> > >>> HI Mike,
> > >>>
> > >>> I tried your patch and it is has eliminated first traceback but I still do not see my remote targets.
> > >>>
> > >>
> > >> That is sort of expected. Your target is not setup for ALUA properly. It
> > >> says it supports ALUA, but when scsi_dh_alua asks about the ports it is
> > >> reporting there are none. Ccing the people that made the patch that
> > >> added the issue and own the code.
> > >>
> > >> Hey Christoph and Hannes,
> > >>
> > >> The dh/alua changes that added this:
> > >>
> > >> error = scsi_dh_add_device(sdev);
> > >> if (error) {
> > >> sdev_printk(KERN_INFO, sdev,
> > >> "failed to add device handler: %d\n",
> > >> error);
> > >> return error;
> > >> }
> > >>
> > >> to scsi_sysfs_add_sdev are adding a regression.
> > >>
> > >> 1. If that fails, then we forget to do device_del before doing the
> > >> return. My patch in this thread added that back, so we do not see the
> > >> sysfs oopses anymore. But.....
> > >>
> > >> 2. It looks like in older kernels, we would allow misconfigured targets
> > >> like this one to still setup devices. Do we want that old behavior back?
> > >> Should we just ignore the return value from scsi_dh_add_device above?
> > >> Note that in this case, it is LIO so it can be easily fixed on the
> > >> target side by just setting it up properly. I do not think other targets
> > >> would hit this type of issue.
> > >>
> > >
> > > Btw, what does misconfigured mean here wrt target ALUA..?
> >
> > [ 25.833195] sd 6:0:0:4: alua: supports implicit and explicit TPGS
> > [ 25.833360] sd 6:0:0:4: alua: No target port descriptors found
> > [ 25.833363] sd 6:0:0:4: alua: Attach failed (-22)
> > [ 25.833365] sd 6:0:0:4: failed to add device handler: -22
> >
>
> Strange, this hasn't changed in forever on the target side..
>
> > He has LIO configured to report it supports implicit/explicit ALUA, but
> > the ports do not seem to be configured.
> >
> > For the LIO config side, are his LUNs just not in a the default_lu_gp or
> > any other group?
>
> So every non-PSCSI backend device becomes part of default_lu_gp +
> default_tg_pt_gp and automatically shows up in EVPD=0x83, without user
> needing to do any additional configuration.
>
> Here's what the output looks like:
>
> root@haakon3:/usr/src/target-pending.git# sg_inq -Hi /dev/sdb
> VPD INQUIRY: Device Identification page
> <SNIP>
> Designation descriptor number 3, descriptor length: 8
> transport: Serial Attached SCSI Protocol (SPL-2)
> designator_type: Relative target port, code_set: Binary
> associated with the target port
> designator header(hex): 61 94 00 04
> designator:
> 00 00 00 00 02 ....
> Designation descriptor number 4, descriptor length: 8
> transport: Serial Attached SCSI Protocol (SPL-2)
> designator_type: Target port group, code_set: Binary
> associated with the target port
> designator header(hex): 61 95 00 04
> designator:
> 00 00 00 00 00 ....
> Designation descriptor number 5, descriptor length: 8
> designator_type: Logical unit group, code_set: Binary
> associated with the addressed logical unit
> designator header(hex): 01 06 00 04
> designator:
> 00 00 00 00 00 ....
> <SNIP>
>
> So AFAICT, the relative target port, target port group, and logical unit
> group being returned from target on v4.5-rc1 code looks correct.
>
> Serguei, can you confirm with 'sg_inq -Hi /dev/sdX' output on your side
> with the v3.10 based target..?
>
> AFAICT the parsing in scsi_vpd_tpg_id() from commit a8aa3978 looks
> correct too.
>
> Hannes, any ideas..?
Ping.
^ permalink raw reply [flat|nested] 46+ messages in thread* Re: [Bug 111441] New: iscsi fails to attach to targets
2016-02-08 8:01 ` Nicholas A. Bellinger
@ 2016-02-16 19:08 ` Hannes Reinecke
2016-02-27 22:15 ` Nicholas A. Bellinger
0 siblings, 1 reply; 46+ messages in thread
From: Hannes Reinecke @ 2016-02-16 19:08 UTC (permalink / raw)
To: Nicholas A. Bellinger
Cc: Serguei Bezverkhi (sbezverk), bugzilla-daemon@bugzilla.kernel.org,
linux-scsi@vger.kernel.org, Christoph Hellwig, Hannes Reinecke,
Mike Christie
On 02/08/2016 09:01 AM, Nicholas A. Bellinger wrote:
> On Tue, 2016-02-02 at 14:56 -0800, Nicholas A. Bellinger wrote:
>> On Mon, 2016-02-01 at 10:55 -0600, Mike Christie wrote:
>>> On 01/30/2016 01:38 AM, Nicholas A. Bellinger wrote:
>>>> On Fri, 2016-01-29 at 17:32 -0600, Mike Christie wrote:
>>>>> On 01/29/2016 04:21 PM, Serguei Bezverkhi (sbezverk) wrote:
>>>>>> HI Mike,
>>>>>>
>>>>>> I tried your patch and it is has eliminated first traceback but I still do not see my remote targets.
>>>>>>
>>>>>
>>>>> That is sort of expected. Your target is not setup for ALUA properly. It
>>>>> says it supports ALUA, but when scsi_dh_alua asks about the ports it is
>>>>> reporting there are none. Ccing the people that made the patch that
>>>>> added the issue and own the code.
>>>>>
>>>>> Hey Christoph and Hannes,
>>>>>
>>>>> The dh/alua changes that added this:
>>>>>
>>>>> error = scsi_dh_add_device(sdev);
>>>>> if (error) {
>>>>> sdev_printk(KERN_INFO, sdev,
>>>>> "failed to add device handler: %d\n",
>>>>> error);
>>>>> return error;
>>>>> }
>>>>>
>>>>> to scsi_sysfs_add_sdev are adding a regression.
>>>>>
>>>>> 1. If that fails, then we forget to do device_del before doing the
>>>>> return. My patch in this thread added that back, so we do not see the
>>>>> sysfs oopses anymore. But.....
>>>>>
>>>>> 2. It looks like in older kernels, we would allow misconfigured targets
>>>>> like this one to still setup devices. Do we want that old behavior back?
>>>>> Should we just ignore the return value from scsi_dh_add_device above?
>>>>> Note that in this case, it is LIO so it can be easily fixed on the
>>>>> target side by just setting it up properly. I do not think other targets
>>>>> would hit this type of issue.
>>>>>
>>>>
>>>> Btw, what does misconfigured mean here wrt target ALUA..?
>>>
>>> [ 25.833195] sd 6:0:0:4: alua: supports implicit and explicit TPGS
>>> [ 25.833360] sd 6:0:0:4: alua: No target port descriptors found
>>> [ 25.833363] sd 6:0:0:4: alua: Attach failed (-22)
>>> [ 25.833365] sd 6:0:0:4: failed to add device handler: -22
>>>
>>
>> Strange, this hasn't changed in forever on the target side..
>>
>>> He has LIO configured to report it supports implicit/explicit ALUA, but
>>> the ports do not seem to be configured.
>>>
>>> For the LIO config side, are his LUNs just not in a the default_lu_gp or
>>> any other group?
>>
>> So every non-PSCSI backend device becomes part of default_lu_gp +
>> default_tg_pt_gp and automatically shows up in EVPD=0x83, without user
>> needing to do any additional configuration.
>>
>> Here's what the output looks like:
>>
>> root@haakon3:/usr/src/target-pending.git# sg_inq -Hi /dev/sdb
>> VPD INQUIRY: Device Identification page
>> <SNIP>
>> Designation descriptor number 3, descriptor length: 8
>> transport: Serial Attached SCSI Protocol (SPL-2)
>> designator_type: Relative target port, code_set: Binary
>> associated with the target port
>> designator header(hex): 61 94 00 04
>> designator:
>> 00 00 00 00 02 ....
>> Designation descriptor number 4, descriptor length: 8
>> transport: Serial Attached SCSI Protocol (SPL-2)
>> designator_type: Target port group, code_set: Binary
>> associated with the target port
>> designator header(hex): 61 95 00 04
>> designator:
>> 00 00 00 00 00 ....
>> Designation descriptor number 5, descriptor length: 8
>> designator_type: Logical unit group, code_set: Binary
>> associated with the addressed logical unit
>> designator header(hex): 01 06 00 04
>> designator:
>> 00 00 00 00 00 ....
>> <SNIP>
>>
>> So AFAICT, the relative target port, target port group, and logical unit
>> group being returned from target on v4.5-rc1 code looks correct.
>>
>> Serguei, can you confirm with 'sg_inq -Hi /dev/sdX' output on your side
>> with the v3.10 based target..?
>>
>> AFAICT the parsing in scsi_vpd_tpg_id() from commit a8aa3978 looks
>> correct too.
>>
>> Hannes, any ideas..?
>
> Ping.
>
Please try with my latest scsi_dh_alua patchset posted to linux-scsi.
That should solve the error attaching devices.
Cheers,
Hannes
--
Dr. Hannes Reinecke
Kirchenweg 47
D-90419 Nürnberg
Tel.: 0911 - 3 77 76 10
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 46+ messages in thread* Re: [Bug 111441] New: iscsi fails to attach to targets
2016-02-16 19:08 ` Hannes Reinecke
@ 2016-02-27 22:15 ` Nicholas A. Bellinger
0 siblings, 0 replies; 46+ messages in thread
From: Nicholas A. Bellinger @ 2016-02-27 22:15 UTC (permalink / raw)
To: Hannes Reinecke
Cc: Serguei Bezverkhi (sbezverk), bugzilla-daemon@bugzilla.kernel.org,
linux-scsi@vger.kernel.org, Christoph Hellwig, Hannes Reinecke,
Mike Christie
Hey Hannes,
On Tue, 2016-02-16 at 20:08 +0100, Hannes Reinecke wrote:
> On 02/08/2016 09:01 AM, Nicholas A. Bellinger wrote:
> > On Tue, 2016-02-02 at 14:56 -0800, Nicholas A. Bellinger wrote:
> >> On Mon, 2016-02-01 at 10:55 -0600, Mike Christie wrote:
> >>> On 01/30/2016 01:38 AM, Nicholas A. Bellinger wrote:
> >>>> On Fri, 2016-01-29 at 17:32 -0600, Mike Christie wrote:
<SNIP>
> >>>> Btw, what does misconfigured mean here wrt target ALUA..?
> >>>
> >>> [ 25.833195] sd 6:0:0:4: alua: supports implicit and explicit TPGS
> >>> [ 25.833360] sd 6:0:0:4: alua: No target port descriptors found
> >>> [ 25.833363] sd 6:0:0:4: alua: Attach failed (-22)
> >>> [ 25.833365] sd 6:0:0:4: failed to add device handler: -22
> >>>
> >>
> >> Strange, this hasn't changed in forever on the target side..
> >>
> >>> He has LIO configured to report it supports implicit/explicit ALUA, but
> >>> the ports do not seem to be configured.
> >>>
> >>> For the LIO config side, are his LUNs just not in a the default_lu_gp or
> >>> any other group?
> >>
> >> So every non-PSCSI backend device becomes part of default_lu_gp +
> >> default_tg_pt_gp and automatically shows up in EVPD=0x83, without user
> >> needing to do any additional configuration.
> >>
> >> Here's what the output looks like:
> >>
> >> root@haakon3:/usr/src/target-pending.git# sg_inq -Hi /dev/sdb
> >> VPD INQUIRY: Device Identification page
> >> <SNIP>
> >> Designation descriptor number 3, descriptor length: 8
> >> transport: Serial Attached SCSI Protocol (SPL-2)
> >> designator_type: Relative target port, code_set: Binary
> >> associated with the target port
> >> designator header(hex): 61 94 00 04
> >> designator:
> >> 00 00 00 00 02 ....
> >> Designation descriptor number 4, descriptor length: 8
> >> transport: Serial Attached SCSI Protocol (SPL-2)
> >> designator_type: Target port group, code_set: Binary
> >> associated with the target port
> >> designator header(hex): 61 95 00 04
> >> designator:
> >> 00 00 00 00 00 ....
> >> Designation descriptor number 5, descriptor length: 8
> >> designator_type: Logical unit group, code_set: Binary
> >> associated with the addressed logical unit
> >> designator header(hex): 01 06 00 04
> >> designator:
> >> 00 00 00 00 00 ....
> >> <SNIP>
> >>
> >> So AFAICT, the relative target port, target port group, and logical unit
> >> group being returned from target on v4.5-rc1 code looks correct.
> >>
> >> Serguei, can you confirm with 'sg_inq -Hi /dev/sdX' output on your side
> >> with the v3.10 based target..?
> >>
> >> AFAICT the parsing in scsi_vpd_tpg_id() from commit a8aa3978 looks
> >> correct too.
> >>
> >> Hannes, any ideas..?
> >
> > Ping.
> >
> Please try with my latest scsi_dh_alua patchset posted to linux-scsi.
> That should solve the error attaching devices.
>
Just to confirm, this was not a target side issue, right..?
Also, since Serguei is seeing this on v4.4 we'll still need some hack
for stable, assuming you're entire patchset won't be in 4.4.y code. ;)
Are you OK with Mike's original patch, or do you have something better
to submit to Greg-KH..?
^ permalink raw reply [flat|nested] 46+ messages in thread
* Re: [Bug 111441] New: iscsi fails to attach to targets
2016-01-29 23:32 ` Mike Christie
2016-01-30 7:38 ` Nicholas A. Bellinger
@ 2016-02-02 18:09 ` Christoph Hellwig
2016-02-02 20:12 ` Mike Christie
2016-02-22 0:45 ` Serguei Bezverkhi (sbezverk)
2 siblings, 1 reply; 46+ messages in thread
From: Christoph Hellwig @ 2016-02-02 18:09 UTC (permalink / raw)
To: Mike Christie
Cc: Serguei Bezverkhi (sbezverk), bugzilla-daemon@bugzilla.kernel.org,
linux-scsi@vger.kernel.org, Christoph Hellwig, Hannes Reinecke
On Fri, Jan 29, 2016 at 05:32:54PM -0600, Mike Christie wrote:
> Hey Christoph and Hannes,
>
> The dh/alua changes that added this:
>
> error = scsi_dh_add_device(sdev);
> if (error) {
> sdev_printk(KERN_INFO, sdev,
> "failed to add device handler: %d\n",
> error);
> return error;
> }
>
> to scsi_sysfs_add_sdev are adding a regression.
>
> 1. If that fails, then we forget to do device_del before doing the
> return. My patch in this thread added that back, so we do not see the
> sysfs oopses anymore. But.....
Ok.
> 2. It looks like in older kernels, we would allow misconfigured targets
> like this one to still setup devices. Do we want that old behavior back?
> Should we just ignore the return value from scsi_dh_add_device above?
> Note that in this case, it is LIO so it can be easily fixed on the
> target side by just setting it up properly. I do not think other targets
> would hit this type of issue.
Be liberal in what you accept.. I guess we need to continue allowing
to connect to these broken targets, but a warning would be useful.
Can you send a patch?
^ permalink raw reply [flat|nested] 46+ messages in thread* Re: [Bug 111441] New: iscsi fails to attach to targets
2016-02-02 18:09 ` Christoph Hellwig
@ 2016-02-02 20:12 ` Mike Christie
2016-02-02 20:25 ` Serguei Bezverkhi (sbezverk)
2016-02-02 21:54 ` Serguei Bezverkhi (sbezverk)
0 siblings, 2 replies; 46+ messages in thread
From: Mike Christie @ 2016-02-02 20:12 UTC (permalink / raw)
To: Christoph Hellwig
Cc: Serguei Bezverkhi (sbezverk), bugzilla-daemon@bugzilla.kernel.org,
linux-scsi@vger.kernel.org, Hannes Reinecke
[-- Attachment #1: Type: text/plain, Size: 1325 bytes --]
On 02/02/2016 12:09 PM, Christoph Hellwig wrote:
> On Fri, Jan 29, 2016 at 05:32:54PM -0600, Mike Christie wrote:
>> Hey Christoph and Hannes,
>>
>> The dh/alua changes that added this:
>>
>> error = scsi_dh_add_device(sdev);
>> if (error) {
>> sdev_printk(KERN_INFO, sdev,
>> "failed to add device handler: %d\n",
>> error);
>> return error;
>> }
>>
>> to scsi_sysfs_add_sdev are adding a regression.
>>
>> 1. If that fails, then we forget to do device_del before doing the
>> return. My patch in this thread added that back, so we do not see the
>> sysfs oopses anymore. But.....
>
> Ok.
>
>> 2. It looks like in older kernels, we would allow misconfigured targets
>> like this one to still setup devices. Do we want that old behavior back?
>> Should we just ignore the return value from scsi_dh_add_device above?
>> Note that in this case, it is LIO so it can be easily fixed on the
>> target side by just setting it up properly. I do not think other targets
>> would hit this type of issue.
>
> Be liberal in what you accept.. I guess we need to continue allowing
> to connect to these broken targets, but a warning would be useful.
>
> Can you send a patch?
Serguei, can you try the attached patch? Drop the other one I sent.
[-- Attachment #2: scsi-allow-attach-failures.patch --]
[-- Type: text/x-patch, Size: 584 bytes --]
diff --git a/drivers/scsi/scsi_sysfs.c b/drivers/scsi/scsi_sysfs.c
index 21930c9..7dcc4bf 100644
--- a/drivers/scsi/scsi_sysfs.c
+++ b/drivers/scsi/scsi_sysfs.c
@@ -1059,9 +1059,12 @@ int scsi_sysfs_add_sdev(struct scsi_device *sdev)
error = scsi_dh_add_device(sdev);
if (error) {
+ /*
+ * Allow device setup to succeed. Attachment can be retried
+ * from userpsace or device can be still used in degraded mode.
+ */
sdev_printk(KERN_INFO, sdev,
"failed to add device handler: %d\n", error);
- return error;
}
device_enable_async_suspend(&sdev->sdev_dev);
^ permalink raw reply related [flat|nested] 46+ messages in thread* RE: [Bug 111441] New: iscsi fails to attach to targets
2016-02-02 20:12 ` Mike Christie
@ 2016-02-02 20:25 ` Serguei Bezverkhi (sbezverk)
2016-02-02 21:54 ` Serguei Bezverkhi (sbezverk)
1 sibling, 0 replies; 46+ messages in thread
From: Serguei Bezverkhi (sbezverk) @ 2016-02-02 20:25 UTC (permalink / raw)
To: Mike Christie, Christoph Hellwig
Cc: bugzilla-daemon@bugzilla.kernel.org, linux-scsi@vger.kernel.org,
Hannes Reinecke
Sure thing, I will test it tonight and let you know the result.
Thank you
Serguei
-----Original Message-----
From: Mike Christie [mailto:michaelc@cs.wisc.edu]
Sent: Tuesday, February 02, 2016 3:12 PM
To: Christoph Hellwig <hch@infradead.org>
Cc: Serguei Bezverkhi (sbezverk) <sbezverk@cisco.com>; bugzilla-daemon@bugzilla.kernel.org; linux-scsi@vger.kernel.org; Hannes Reinecke <hare@suse.de>
Subject: Re: [Bug 111441] New: iscsi fails to attach to targets
On 02/02/2016 12:09 PM, Christoph Hellwig wrote:
> On Fri, Jan 29, 2016 at 05:32:54PM -0600, Mike Christie wrote:
>> Hey Christoph and Hannes,
>>
>> The dh/alua changes that added this:
>>
>> error = scsi_dh_add_device(sdev);
>> if (error) {
>> sdev_printk(KERN_INFO, sdev,
>> "failed to add device handler: %d\n",
>> error);
>> return error;
>> }
>>
>> to scsi_sysfs_add_sdev are adding a regression.
>>
>> 1. If that fails, then we forget to do device_del before doing the
>> return. My patch in this thread added that back, so we do not see the
>> sysfs oopses anymore. But.....
>
> Ok.
>
>> 2. It looks like in older kernels, we would allow misconfigured
>> targets like this one to still setup devices. Do we want that old behavior back?
>> Should we just ignore the return value from scsi_dh_add_device above?
>> Note that in this case, it is LIO so it can be easily fixed on the
>> target side by just setting it up properly. I do not think other
>> targets would hit this type of issue.
>
> Be liberal in what you accept.. I guess we need to continue allowing
> to connect to these broken targets, but a warning would be useful.
>
> Can you send a patch?
Serguei, can you try the attached patch? Drop the other one I sent.
^ permalink raw reply [flat|nested] 46+ messages in thread* RE: [Bug 111441] New: iscsi fails to attach to targets
2016-02-02 20:12 ` Mike Christie
2016-02-02 20:25 ` Serguei Bezverkhi (sbezverk)
@ 2016-02-02 21:54 ` Serguei Bezverkhi (sbezverk)
1 sibling, 0 replies; 46+ messages in thread
From: Serguei Bezverkhi (sbezverk) @ 2016-02-02 21:54 UTC (permalink / raw)
To: Mike Christie, Christoph Hellwig
Cc: bugzilla-daemon@bugzilla.kernel.org, linux-scsi@vger.kernel.org,
Hannes Reinecke
HI Mike,
It is working now, it spits alua related error messages but it attaches remote and local targets, so my OpenStack is back to life. Please let me know if you plan to commit this fix upstream.
[ 27.579303] scsi 3:0:0:2: Direct-Access LIO-ORG san-disk-2 4.0 PQ: 0 ANSI: 5
[ 27.579797] sd 3:0:0:2: alua: supports implicit and explicit TPGS
[ 27.579932] sd 3:0:0:2: [sdc] 20507809792 512-byte logical blocks: (10.4 TB/9.54 TiB)
[ 27.579975] sd 3:0:0:2: alua: No target port descriptors found
[ 27.579977] sd 3:0:0:2: alua: Attach failed (-22)
[ 27.580640] sd 3:0:0:2: failed to add device handler: -22
[ 27.580897] sd 3:0:0:2: [sdc] Write Protect is off
[ 27.580899] sd 3:0:0:2: [sdc] Mode Sense: 43 00 10 08
[ 27.580922] sd 3:0:0:2: Attached scsi generic sg3 type 0
[ 27.581041] sd 3:0:0:2: [sdc] Write cache: enabled, read cache: enabled, supports DPO and FUA
[ 27.630156] sd 3:0:0:2: [sdc] Attached SCSI disk
Thank you very much
Serguei
Serguei Bezverkhi,
TECHNICAL LEADER.SERVICES
Global SP Services
sbezverk@cisco.com
Phone: +1 416 306 7312
Mobile: +1 514 234 7374
CCIE (R&S,SP,Sec) - #9527
Cisco.com
Think before you print.
This email may contain confidential and privileged material for the sole use of the intended recipient. Any review, use, distribution or disclosure by others is strictly prohibited. If you are not the intended recipient (or authorized to receive for the recipient), please contact the sender by reply email and delete all copies of this message.
Please click here for Company Registration Information.
-----Original Message-----
From: Mike Christie [mailto:michaelc@cs.wisc.edu]
Sent: Tuesday, February 02, 2016 3:12 PM
To: Christoph Hellwig <hch@infradead.org>
Cc: Serguei Bezverkhi (sbezverk) <sbezverk@cisco.com>; bugzilla-daemon@bugzilla.kernel.org; linux-scsi@vger.kernel.org; Hannes Reinecke <hare@suse.de>
Subject: Re: [Bug 111441] New: iscsi fails to attach to targets
On 02/02/2016 12:09 PM, Christoph Hellwig wrote:
> On Fri, Jan 29, 2016 at 05:32:54PM -0600, Mike Christie wrote:
>> Hey Christoph and Hannes,
>>
>> The dh/alua changes that added this:
>>
>> error = scsi_dh_add_device(sdev);
>> if (error) {
>> sdev_printk(KERN_INFO, sdev,
>> "failed to add device handler: %d\n",
>> error);
>> return error;
>> }
>>
>> to scsi_sysfs_add_sdev are adding a regression.
>>
>> 1. If that fails, then we forget to do device_del before doing the
>> return. My patch in this thread added that back, so we do not see the
>> sysfs oopses anymore. But.....
>
> Ok.
>
>> 2. It looks like in older kernels, we would allow misconfigured
>> targets like this one to still setup devices. Do we want that old behavior back?
>> Should we just ignore the return value from scsi_dh_add_device above?
>> Note that in this case, it is LIO so it can be easily fixed on the
>> target side by just setting it up properly. I do not think other
>> targets would hit this type of issue.
>
> Be liberal in what you accept.. I guess we need to continue allowing
> to connect to these broken targets, but a warning would be useful.
>
> Can you send a patch?
Serguei, can you try the attached patch? Drop the other one I sent.
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 46+ messages in thread
* RE: [Bug 111441] New: iscsi fails to attach to targets
2016-01-29 23:32 ` Mike Christie
2016-01-30 7:38 ` Nicholas A. Bellinger
2016-02-02 18:09 ` Christoph Hellwig
@ 2016-02-22 0:45 ` Serguei Bezverkhi (sbezverk)
2016-02-22 7:08 ` Hannes Reinecke
2 siblings, 1 reply; 46+ messages in thread
From: Serguei Bezverkhi (sbezverk) @ 2016-02-22 0:45 UTC (permalink / raw)
To: Mike Christie
Cc: bugzilla-daemon@bugzilla.kernel.org, linux-scsi@vger.kernel.org,
Christoph Hellwig, Hannes Reinecke
Hi Mike,
I just wanted to follow up with you to see if the patch got committed to an upstream kernel if yes, please let me into which version it went.
Thank you
Serguei
Serguei Bezverkhi,
TECHNICAL LEADER.SERVICES
Global SP Services
sbezverk@cisco.com
Phone: +1 416 306 7312
Mobile: +1 514 234 7374
CCIE (R&S,SP,Sec) - #9527
Cisco.com
Think before you print.
This email may contain confidential and privileged material for the sole use of the intended recipient. Any review, use, distribution or disclosure by others is strictly prohibited. If you are not the intended recipient (or authorized to receive for the recipient), please contact the sender by reply email and delete all copies of this message.
Please click here for Company Registration Information.
-----Original Message-----
From: Mike Christie [mailto:michaelc@cs.wisc.edu]
Sent: Friday, January 29, 2016 6:33 PM
To: Serguei Bezverkhi (sbezverk) <sbezverk@cisco.com>
Cc: bugzilla-daemon@bugzilla.kernel.org; linux-scsi@vger.kernel.org; Christoph Hellwig <hch@infradead.org>; Hannes Reinecke <hare@suse.de>
Subject: Re: [Bug 111441] New: iscsi fails to attach to targets
On 01/29/2016 04:21 PM, Serguei Bezverkhi (sbezverk) wrote:
> HI Mike,
>
> I tried your patch and it is has eliminated first traceback but I still do not see my remote targets.
>
That is sort of expected. Your target is not setup for ALUA properly. It says it supports ALUA, but when scsi_dh_alua asks about the ports it is reporting there are none. Ccing the people that made the patch that added the issue and own the code.
Hey Christoph and Hannes,
The dh/alua changes that added this:
error = scsi_dh_add_device(sdev);
if (error) {
sdev_printk(KERN_INFO, sdev,
"failed to add device handler: %d\n", error);
return error;
}
to scsi_sysfs_add_sdev are adding a regression.
1. If that fails, then we forget to do device_del before doing the return. My patch in this thread added that back, so we do not see the sysfs oopses anymore. But.....
2. It looks like in older kernels, we would allow misconfigured targets like this one to still setup devices. Do we want that old behavior back?
Should we just ignore the return value from scsi_dh_add_device above?
Note that in this case, it is LIO so it can be easily fixed on the target side by just setting it up properly. I do not think other targets would hit this type of issue.
>
> Here is dmesg
>
> [ 26.103812] scsi 3:0:0:2: Direct-Access LIO-ORG san-disk-2 4.0 PQ: 0 ANSI: 5
> [ 26.104338] sd 3:0:0:2: alua: supports implicit and explicit TPGS
> [ 26.104549] sd 3:0:0:2: alua: No target port descriptors found
> [ 26.104552] sd 3:0:0:2: alua: Attach failed (-22)
> [ 26.104554] sd 3:0:0:2: failed to add device handler: -22
> [ 26.104578] sd 3:0:0:2: [sdc] 20507809792 512-byte logical blocks: (10.4 TB/9.54 TiB)
> [ 26.104905] sd 3:0:0:2: [sdc] Write Protect is off
> [ 26.104908] sd 3:0:0:2: [sdc] Mode Sense: 43 00 10 08
> [ 26.105036] sd 3:0:0:2: [sdc] Write cache: enabled, read cache: enabled, supports DPO and FUA
> [ 26.112294] scsi host6: iSCSI Initiator over TCP/IP
> [ 26.113279] scsi 4:0:0:3: Direct-Access LIO-ORG san-disk-3 4.0 PQ: 0 ANSI: 5
> [ 26.113690] sd 4:0:0:3: alua: supports implicit and explicit TPGS
> [ 26.113877] sd 4:0:0:3: [sdd] 9765625856 512-byte logical blocks: (5.00 TB/4.54 TiB)
> [ 26.113948] sd 4:0:0:3: alua: No target port descriptors found
> [ 26.113951] sd 4:0:0:3: alua: Attach failed (-22)
> [ 26.113953] sd 4:0:0:3: failed to add device handler: -22
> [ 26.114292] sd 4:0:0:3: [sdd] Write Protect is off
> [ 26.114295] sd 4:0:0:3: [sdd] Mode Sense: 43 00 10 08
> [ 26.114503] sd 4:0:0:3: [sdd] Write cache: enabled, read cache: enabled, supports DPO and FUA
> [ 26.123875] scsi 5:0:0:1: Direct-Access LIO-ORG san-disk-1 4.0 PQ: 0 ANSI: 5
> [ 26.123911] scsi 6:0:0:4: Direct-Access LIO-ORG san-disk-4 4.0 PQ: 0 ANSI: 5
> [ 26.124452] sd 6:0:0:4: alua: supports implicit and explicit TPGS
> [ 26.124453] sd 5:0:0:1: alua: supports implicit and explicit TPGS
> [ 26.124724] sd 5:0:0:1: alua: No target port descriptors found
> [ 26.124727] sd 5:0:0:1: alua: Attach failed (-22)
> [ 26.124728] sd 5:0:0:1: failed to add device handler: -22
> [ 26.124736] sd 6:0:0:4: [sde] 10742171648 512-byte logical blocks: (5.49 TB/5.00 TiB)
> [ 26.124773] sd 5:0:0:1: [sdf] 7812499389 512-byte logical blocks: (3.99 TB/3.63 TiB)
> [ 26.124777] sd 6:0:0:4: alua: No target port descriptors found
> [ 26.124779] sd 6:0:0:4: alua: Attach failed (-22)
> [ 26.124780] sd 6:0:0:4: failed to add device handler: -22
> [ 26.125182] sd 5:0:0:1: [sdf] Write Protect is off
> [ 26.125184] sd 5:0:0:1: [sdf] Mode Sense: 43 00 10 08
> [ 26.125217] sd 6:0:0:4: [sde] Write Protect is off
> [ 26.125220] sd 6:0:0:4: [sde] Mode Sense: 43 00 10 08
> [ 26.125306] sd 5:0:0:1: [sdf] Write cache: enabled, read cache: enabled, supports DPO and FUA
> [ 26.125512] sd 6:0:0:4: [sde] Write cache: enabled, read cache: enabled, supports DPO and FUA
> [ 26.129633] sdf: sdf1
> [ 26.130637] sd 5:0:0:1: [sdf] Attached SCSI disk
> [ 26.144377] ixgbe 0000:04:00.0: registered PHC device on enp4s0f0
> [ 26.149072] sdc: sdc1
> [ 26.150434] sd 3:0:0:2: [sdc] Attached SCSI disk
> [ 26.190709] sdd: sdd1 sdd2
> [ 26.193348] sd 4:0:0:3: [sdd] Attached SCSI disk
> [ 26.230515] sde: sde1
> [ 26.231674] sd 6:0:0:4: [sde] Attached SCSI disk
> [ 26.231987] sd 6:0:0:4: [sde] Synchronizing SCSI cache
> [ 26.232021] sd 5:0:0:1: [sdf] Synchronizing SCSI cache
> [ 26.233212] sd 3:0:0:2: [sdc] Synchronizing SCSI cache
> [ 26.233440] sd 4:0:0:3: [sdd] Synchronizing SCSI cache
> [ 26.236755] Buffer I/O error on dev sdc, logical block 2563476132, async page read
> [ 26.238897] Buffer I/O error on dev sdd, logical block 1220703182, async page read
> [ 26.245773] ixgbe 0000:04:00.1: SR-IOV enabled with 8 VFs
> [ 26.245775] ixgbe 0000:04:00.1: configure port vlans to keep your VFs secure
> [ 26.274544] scsi 6:0:0:0: Unexpected response from lun 4 while scanning, scan aborted
> [ 26.283173] scsi 3:0:0:0: Unexpected response from lun 2 while scanning, scan aborted
> [ 26.288571] scsi 4:0:0:0: Unexpected response from lun 3 while scanning, scan aborted
> [ 26.288618] scsi 5:0:0:0: Unexpected response from lun 1 while scanning, scan aborted
>
>
> Second traceback is gone too, but still no luck attaching local iscsi targets either.
>
>
> [ 639.148875] TARGET_CORE[iSCSI]: Expected Transfer Length: 264 does
> not match SCSI CDB Length: 8 for SAM Opcode: 0x12 [ 639.148911] sd
> 7:0:0:0: [sdc] 115343360 512-byte logical blocks: (59.0 GB/55.0 GiB) [
> 639.148925] sd 7:0:0:0: alua: No target port descriptors found [
> 639.148928] sd 7:0:0:0: alua: Attach failed (-22) [ 639.149186] sd
> 7:0:0:0: [sdc] Write Protect is off [ 639.149188] sd 7:0:0:0: [sdc]
> Mode Sense: 43 00 10 08 [ 639.149279] sd 7:0:0:0: [sdc] Write cache:
> enabled, read cache: enabled, supports DPO and FUA [ 639.149298] iSCSI/iqn.1994-05.com.redhat:cf7f1fafca4b: Unsupported SCSI Opcode 0xa3, sending CHECK_CONDITION.
> [ 639.149530] sd 7:0:0:0: failed to add device handler: -22 [
> 639.154762] sd 7:0:0:0: [sdc] Attached SCSI disk [ 639.154857] sd
> 7:0:0:0: [sdc] Synchronizing SCSI cache
> [ 655.279047] scsi 7:0:0:0: Direct-Access LIO-ORG IBLOCK 4.0 PQ: 0 ANSI: 5
> [ 655.279397] sd 7:0:0:0: alua: supports implicit and explicit TPGS [
> 655.279503] TARGET_CORE[iSCSI]: Expected Transfer Length: 264 does not
> match SCSI CDB Length: 8 for SAM Opcode: 0x12 [ 655.279533] sd
> 7:0:0:0: alua: No target port descriptors found [ 655.279535] sd
> 7:0:0:0: alua: Attach failed (-22) [ 655.279587] sd 7:0:0:0: [sdc]
> 115343360 512-byte logical blocks: (59.0 GB/55.0 GiB) [ 655.279848]
> sd 7:0:0:0: [sdc] Write Protect is off [ 655.279849] sd 7:0:0:0:
> [sdc] Mode Sense: 43 00 10 08 [ 655.279981] sd 7:0:0:0: [sdc] Write
> cache: enabled, read cache: enabled, supports DPO and FUA [ 655.280034] iSCSI/iqn.1994-05.com.redhat:cf7f1fafca4b: Unsupported SCSI Opcode 0xa3, sending CHECK_CONDITION.
> [ 655.280171] sd 7:0:0:0: failed to add device handler: -22 [
> 655.286008] sd 7:0:0:0: [sdc] Attached SCSI disk [ 655.286132] sd
> 7:0:0:0: [sdc] Synchronizing SCSI cache
>
>
> Serguei Bezverkhi,
> TECHNICAL LEADER.SERVICES
> Global SP Services
> sbezverk@cisco.com
> Phone: +1 416 306 7312
> Mobile: +1 514 234 7374
>
> CCIE (R&S,SP,Sec) - #9527
>
> Cisco.com
>
>
>
> Think before you print.
> This email may contain confidential and privileged material for the sole use of the intended recipient. Any review, use, distribution or disclosure by others is strictly prohibited. If you are not the intended recipient (or authorized to receive for the recipient), please contact the sender by reply email and delete all copies of this message.
> Please click here for Company Registration Information.
>
>
>
>
> -----Original Message-----
> From: Mike Christie [mailto:michaelc@cs.wisc.edu]
> Sent: Friday, January 29, 2016 2:27 PM
> To: Serguei Bezverkhi (sbezverk) <sbezverk@cisco.com>
> Cc: bugzilla-daemon@bugzilla.kernel.org; linux-scsi@vger.kernel.org
> Subject: Re: [Bug 111441] New: iscsi fails to attach to targets
>
>
>
> On 01/29/2016 01:11 PM, Serguei Bezverkhi (sbezverk) wrote:
>> If you send me the diff for your patch, I will build new kernel myself.
>>
>
> Bugzilla must be messing something up. I attached to one of the previous mails. Attaching it here again.
>
> Email me offlist and without bugzilla if you do not get it here.
>
> The patch will fix the syfs bug ons you are hitting.
>
> I am not sure if it will fix the genhd one. We can deal with that one next if it is a different issue.
>
>
>> Serguei
>>
>>
>> Serguei Bezverkhi,
>> TECHNICAL LEADER.SERVICES
>> Global SP Services
>> sbezverk@cisco.com
>> Phone: +1 416 306 7312
>> Mobile: +1 514 234 7374
>>
>> CCIE (R&S,SP,Sec) - #9527
>>
>> Cisco.com
>>
>>
>>
>> Think before you print.
>> This email may contain confidential and privileged material for the sole use of the intended recipient. Any review, use, distribution or disclosure by others is strictly prohibited. If you are not the intended recipient (or authorized to receive for the recipient), please contact the sender by reply email and delete all copies of this message.
>> Please click here for Company Registration Information.
>>
>>
>>
>>
>> -----Original Message-----
>> From: Michael Christie [mailto:michaelc@cs.wisc.edu]
>> Sent: Friday, January 29, 2016 2:09 PM
>> To: Serguei Bezverkhi (sbezverk) <sbezverk@cisco.com>
>> Cc: bugzilla-daemon@bugzilla.kernel.org; linux-scsi@vger.kernel.org
>> Subject: Re: [Bug 111441] New: iscsi fails to attach to targets
>>
>>
>>> On Jan 29, 2016, at 6:04 AM, Serguei Bezverkhi (sbezverk) <sbezverk@cisco.com> wrote:
>>>
>>> Actually this server uses both cases: Local taregts (since it is OpenStack server) and remote targets as it tries to mount 4 remotefile systems.
>>>
>>> You are correct, I always use the same box I just change the kernel it is using to boot. No other changes to the environment. I do not mind to load a test kernel without that suspected patch, just get me the RPM.
>>>
>>
>> I do not know what you mean. I think the patch I sent will fix the sysfs errors caused due to alua not being setup properly on your system and scsi_dh_alua failing to attach. That patch should be applied to the 4.4 upstream kernel. Are you saying you want me to make you a kernel rpm?
>> --
>> To unsubscribe from this list: send the line "unsubscribe linux-scsi"
>> in the body of a message to majordomo@vger.kernel.org More majordomo
>> info at http://vger.kernel.org/majordomo-info.html
>>
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-scsi"
> in the body of a message to majordomo@vger.kernel.org More majordomo
> info at http://vger.kernel.org/majordomo-info.html
>
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 46+ messages in thread* Re: [Bug 111441] New: iscsi fails to attach to targets
2016-02-22 0:45 ` Serguei Bezverkhi (sbezverk)
@ 2016-02-22 7:08 ` Hannes Reinecke
2016-02-22 11:36 ` Serguei Bezverkhi (sbezverk)
0 siblings, 1 reply; 46+ messages in thread
From: Hannes Reinecke @ 2016-02-22 7:08 UTC (permalink / raw)
To: Serguei Bezverkhi (sbezverk), Mike Christie
Cc: bugzilla-daemon@bugzilla.kernel.org, linux-scsi@vger.kernel.org,
Christoph Hellwig
On 02/22/2016 01:45 AM, Serguei Bezverkhi (sbezverk) wrote:
> Hi Mike,
>
> I just wanted to follow up with you to see if the patch got committed to an upstream kernel if yes, please let me into which version it went.
>
> Thank you
>
> Serguei
>
>
> Serguei Bezverkhi,
> TECHNICAL LEADER.SERVICES
> Global SP Services
> sbezverk@cisco.com
> Phone: +1 416 306 7312
> Mobile: +1 514 234 7374
>
> CCIE (R&S,SP,Sec) - #9527
>
> Cisco.com
>
>
>
> Think before you print.
> This email may contain confidential and privileged material for the sole use of the intended recipient. Any review, use, distribution or disclosure by others is strictly prohibited. If you are not the intended recipient (or authorized to receive for the recipient), please contact the sender by reply email and delete all copies of this message.
> Please click here for Company Registration Information.
>
>
>
> -----Original Message-----
> From: Mike Christie [mailto:michaelc@cs.wisc.edu]
> Sent: Friday, January 29, 2016 6:33 PM
> To: Serguei Bezverkhi (sbezverk) <sbezverk@cisco.com>
> Cc: bugzilla-daemon@bugzilla.kernel.org; linux-scsi@vger.kernel.org; Christoph Hellwig <hch@infradead.org>; Hannes Reinecke <hare@suse.de>
> Subject: Re: [Bug 111441] New: iscsi fails to attach to targets
>
> On 01/29/2016 04:21 PM, Serguei Bezverkhi (sbezverk) wrote:
>> HI Mike,
>>
>> I tried your patch and it is has eliminated first traceback but I still do not see my remote targets.
>>
>
> That is sort of expected. Your target is not setup for ALUA properly. It says it supports ALUA, but when scsi_dh_alua asks about the ports it is reporting there are none. Ccing the people that made the patch that added the issue and own the code.
>
> Hey Christoph and Hannes,
>
> The dh/alua changes that added this:
>
> error = scsi_dh_add_device(sdev);
> if (error) {
> sdev_printk(KERN_INFO, sdev,
> "failed to add device handler: %d\n", error);
> return error;
> }
>
> to scsi_sysfs_add_sdev are adding a regression.
>
> 1. If that fails, then we forget to do device_del before doing the return. My patch in this thread added that back, so we do not see the sysfs oopses anymore. But.....
>
> 2. It looks like in older kernels, we would allow misconfigured targets like this one to still setup devices. Do we want that old behavior back?
> Should we just ignore the return value from scsi_dh_add_device above?
> Note that in this case, it is LIO so it can be easily fixed on the target side by just setting it up properly. I do not think other targets would hit this type of issue.
>
>
This has been fixed up with my patchset to update the ALUA handler, most
notably the commit 'scsi: ignore errors from scsi_dh_add_device()' which
was included in 4.5.
Cheers,
Hannes
--
Dr. Hannes Reinecke zSeries & Storage
hare@suse.de +49 911 74053 688
SUSE LINUX Products GmbH, Maxfeldstr. 5, 90409 Nürnberg
GF: J. Hawn, J. Guild, F. Imendörffer, HRB 16746 (AG Nürnberg)
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 46+ messages in thread* RE: [Bug 111441] New: iscsi fails to attach to targets
2016-02-22 7:08 ` Hannes Reinecke
@ 2016-02-22 11:36 ` Serguei Bezverkhi (sbezverk)
0 siblings, 0 replies; 46+ messages in thread
From: Serguei Bezverkhi (sbezverk) @ 2016-02-22 11:36 UTC (permalink / raw)
To: Hannes Reinecke, Mike Christie
Cc: bugzilla-daemon@bugzilla.kernel.org, linux-scsi@vger.kernel.org,
Christoph Hellwig
Hello Hannes,
Thank you for your reply. I am on 4.4.2 kernel, is there any chance to commit it in 4.4 as well? If not, could you send me diff for 4.4 kernel.
Best regards
Serguei
Serguei Bezverkhi,
TECHNICAL LEADER.SERVICES
Global SP Services
sbezverk@cisco.com
Phone: +1 416 306 7312
Mobile: +1 514 234 7374
CCIE (R&S,SP,Sec) - #9527
Cisco.com
Think before you print.
This email may contain confidential and privileged material for the sole use of the intended recipient. Any review, use, distribution or disclosure by others is strictly prohibited. If you are not the intended recipient (or authorized to receive for the recipient), please contact the sender by reply email and delete all copies of this message.
Please click here for Company Registration Information.
-----Original Message-----
From: Hannes Reinecke [mailto:hare@suse.de]
Sent: Monday, February 22, 2016 2:08 AM
To: Serguei Bezverkhi (sbezverk) <sbezverk@cisco.com>; Mike Christie <michaelc@cs.wisc.edu>
Cc: bugzilla-daemon@bugzilla.kernel.org; linux-scsi@vger.kernel.org; Christoph Hellwig <hch@infradead.org>
Subject: Re: [Bug 111441] New: iscsi fails to attach to targets
On 02/22/2016 01:45 AM, Serguei Bezverkhi (sbezverk) wrote:
> Hi Mike,
>
> I just wanted to follow up with you to see if the patch got committed to an upstream kernel if yes, please let me into which version it went.
>
> Thank you
>
> Serguei
>
>
> Serguei Bezverkhi,
> TECHNICAL LEADER.SERVICES
> Global SP Services
> sbezverk@cisco.com
> Phone: +1 416 306 7312
> Mobile: +1 514 234 7374
>
> CCIE (R&S,SP,Sec) - #9527
>
> Cisco.com
>
>
>
> Think before you print.
> This email may contain confidential and privileged material for the sole use of the intended recipient. Any review, use, distribution or disclosure by others is strictly prohibited. If you are not the intended recipient (or authorized to receive for the recipient), please contact the sender by reply email and delete all copies of this message.
> Please click here for Company Registration Information.
>
>
>
> -----Original Message-----
> From: Mike Christie [mailto:michaelc@cs.wisc.edu]
> Sent: Friday, January 29, 2016 6:33 PM
> To: Serguei Bezverkhi (sbezverk) <sbezverk@cisco.com>
> Cc: bugzilla-daemon@bugzilla.kernel.org; linux-scsi@vger.kernel.org;
> Christoph Hellwig <hch@infradead.org>; Hannes Reinecke <hare@suse.de>
> Subject: Re: [Bug 111441] New: iscsi fails to attach to targets
>
> On 01/29/2016 04:21 PM, Serguei Bezverkhi (sbezverk) wrote:
>> HI Mike,
>>
>> I tried your patch and it is has eliminated first traceback but I still do not see my remote targets.
>>
>
> That is sort of expected. Your target is not setup for ALUA properly. It says it supports ALUA, but when scsi_dh_alua asks about the ports it is reporting there are none. Ccing the people that made the patch that added the issue and own the code.
>
> Hey Christoph and Hannes,
>
> The dh/alua changes that added this:
>
> error = scsi_dh_add_device(sdev);
> if (error) {
> sdev_printk(KERN_INFO, sdev,
> "failed to add device handler: %d\n", error);
> return error;
> }
>
> to scsi_sysfs_add_sdev are adding a regression.
>
> 1. If that fails, then we forget to do device_del before doing the return. My patch in this thread added that back, so we do not see the sysfs oopses anymore. But.....
>
> 2. It looks like in older kernels, we would allow misconfigured targets like this one to still setup devices. Do we want that old behavior back?
> Should we just ignore the return value from scsi_dh_add_device above?
> Note that in this case, it is LIO so it can be easily fixed on the target side by just setting it up properly. I do not think other targets would hit this type of issue.
>
>
This has been fixed up with my patchset to update the ALUA handler, most notably the commit 'scsi: ignore errors from scsi_dh_add_device()' which was included in 4.5.
Cheers,
Hannes
--
Dr. Hannes Reinecke zSeries & Storage
hare@suse.de +49 911 74053 688
SUSE LINUX Products GmbH, Maxfeldstr. 5, 90409 Nürnberg
GF: J. Hawn, J. Guild, F. Imendörffer, HRB 16746 (AG Nürnberg)
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 46+ messages in thread
* [Bug 111441] iscsi fails to attach to targets
2016-01-28 22:51 [Bug 111441] New: iscsi fails to attach to targets bugzilla-daemon
2016-01-29 1:53 ` Mike Christie
@ 2016-01-29 3:00 ` bugzilla-daemon
2016-01-29 3:05 ` bugzilla-daemon
` (17 subsequent siblings)
19 siblings, 0 replies; 46+ messages in thread
From: bugzilla-daemon @ 2016-01-29 3:00 UTC (permalink / raw)
To: linux-scsi
https://bugzilla.kernel.org/show_bug.cgi?id=111441
--- Comment #1 from Serguei Bezverkhi <sbezverk@cisco.com> ---
Created attachment 202201
--> https://bugzilla.kernel.org/attachment.cgi?id=202201&action=edit
Kernel config
--
You are receiving this mail because:
You are the assignee for the bug.
^ permalink raw reply [flat|nested] 46+ messages in thread* [Bug 111441] iscsi fails to attach to targets
2016-01-28 22:51 [Bug 111441] New: iscsi fails to attach to targets bugzilla-daemon
2016-01-29 1:53 ` Mike Christie
2016-01-29 3:00 ` [Bug 111441] " bugzilla-daemon
@ 2016-01-29 3:05 ` bugzilla-daemon
2016-01-29 3:32 ` bugzilla-daemon
` (16 subsequent siblings)
19 siblings, 0 replies; 46+ messages in thread
From: bugzilla-daemon @ 2016-01-29 3:05 UTC (permalink / raw)
To: linux-scsi
https://bugzilla.kernel.org/show_bug.cgi?id=111441
--- Comment #2 from Serguei Bezverkhi <sbezverk@cisco.com> ---
HI Mike,
Thank you for looking into this issue.
I reproduced this issue this using both mainline compiled kernel and the one
posted by El Repo. I used both of these kernels with RHEL 7.2, both kernels
showed exactly the same issue. When I rollback to the original kernel
3.10.0-327.4.4, I do not see the issue.
As per your request attaching kernel config file. Please let me know if you
need any additional info or if you want to take a look at the router, I can
setup a webex meeting to show you the issue.
Thank you
Serguei
Serguei Bezverkhi,
TECHNICAL LEADER.SERVICES
Global SP Services
sbezverk@cisco.com
Phone: +1 416 306 7312
Mobile: +1 514 234 7374
CCIE (R&S,SP,Sec) - #9527
Cisco.com
Think before you print.
This email may contain confidential and privileged material for the sole use of
the intended recipient. Any review, use, distribution or disclosure by others
is strictly prohibited. If you are not the intended recipient (or authorized to
receive for the recipient), please contact the sender by reply email and delete
all copies of this message.
Please click here for Company Registration Information.
-----Original Message-----
From: linux-scsi-owner@vger.kernel.org
[mailto:linux-scsi-owner@vger.kernel.org] On Behalf Of Mike Christie
Sent: Thursday, January 28, 2016 8:53 PM
To: bugzilla-daemon@bugzilla.kernel.org; linux-scsi@vger.kernel.org
Subject: Re: [Bug 111441] New: iscsi fails to attach to targets
On 01/28/2016 04:51 PM, bugzilla-daemon@bugzilla.kernel.org wrote:
> https://bugzilla.kernel.org/show_bug.cgi?id=111441
>
> Bug ID: 111441
> Summary: iscsi fails to attach to targets
> Product: IO/Storage
> Version: 2.5
> Kernel Version: 4.4.0-1
> Hardware: x86-64
> OS: Linux
> Tree: Mainline
> Status: NEW
> 4.4.0-1.el7.elrepo.x86_64 #1
I have not seen this oops before. We saw similar ones around 5 or 6 years ago,
but they were due to some sysfs or block or scsi issue (I cannot remember
exacty) and fixed there.
Is this a distro kernel or mainline. BZ says mainline, but the kernel name in
bug looks like a red hat related one. Where did you get it?
I do not hit this in 4.4 mainline. Send me your kernel .config, so I can make
sure I have the same options.
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in the
body of a message to majordomo@vger.kernel.org More majordomo info at
http://vger.kernel.org/majordomo-info.html
--
You are receiving this mail because:
You are the assignee for the bug.--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 46+ messages in thread* [Bug 111441] iscsi fails to attach to targets
2016-01-28 22:51 [Bug 111441] New: iscsi fails to attach to targets bugzilla-daemon
` (2 preceding siblings ...)
2016-01-29 3:05 ` bugzilla-daemon
@ 2016-01-29 3:32 ` bugzilla-daemon
2016-01-29 3:40 ` bugzilla-daemon
` (15 subsequent siblings)
19 siblings, 0 replies; 46+ messages in thread
From: bugzilla-daemon @ 2016-01-29 3:32 UTC (permalink / raw)
To: linux-scsi
https://bugzilla.kernel.org/show_bug.cgi?id=111441
--- Comment #3 from Serguei Bezverkhi <sbezverk@cisco.com> ---
Additional tracebacks:
[ 25.799382] WARNING: CPU: 18 PID: 1482 at block/genhd.c:626
add_disk+0x443/0x4a0()
[ 25.799383] Modules linked in: iscsi_tcp libiscsi_tcp 8021q garp mrp rpcrdma
ib_isert iscsi_target_mod ib_iser libiscsi scsi_transport_iscsi ib_srpt
target_core_mod openvswitch bonding ib_srp scsi_transport_srp ib_ipoib
nf_defrag_ipv6 rdma_ucm ib_ucm ib_uverbs ib_umad rdma_cm ib_cm iw_cm ib_sa
ib_mad usnic_verbs ib_core xt_comment xt_multiport iptable_filter ib_addr
iptable_nat nf_conntrack_ipv4 nf_defrag_ipv4 x86_pkg_temp_thermal nf_nat_ipv4
intel_powerclamp nf_nat coretemp kvm_intel nf_conntrack kvm iptable_mangle
irqbypass crct10dif_pclmul crc32_pclmul nfsd aesni_intel lrw gf128mul
glue_helper ablk_helper cryptd ses enclosure sb_edac sg auth_rpcgss edac_core
iTCO_wdt ipmi_devintf iTCO_vendor_support nfs_acl lockd shpchp pcspkr lpc_ich
ipmi_si ipmi_msghandler mfd_core wmi acpi_power_meter grace
[ 25.799435] sunrpc br_netfilter bridge stp llc dm_multipath ip_tables xfs
libcrc32c sd_mod mgag200 drm_kms_helper syscopyarea sysfillrect sysimgblt
fb_sys_fops ttm ixgbe(O) drm fnic i40e libfcoe igb megaraid_sas enic libfc
crc32c_intel vxlan ip6_udp_tunnel udp_tunnel ptp scsi_transport_fc i2c_algo_bit
dca i2c_core pps_core dm_mirror dm_region_hash dm_log dm_mod
[ 25.799462] CPU: 18 PID: 1482 Comm: kworker/u82:3 Tainted: G O
4.4.0 #1
[ 25.799464] Hardware name: Cisco Systems Inc UCSC-C240-M3S/UCSC-C240-M3S,
BIOS C240M3.2.0.8.0.071620152208 07/16/2015
[ 25.799470] Workqueue: events_unbound async_run_entry_fn
[ 25.799473] 0000000000000000 00000000866f6387 ffff885f9d34bcf8
ffffffff81329090
[ 25.799476] 0000000000000000 ffff885f9d34bd30 ffffffff810862c6
ffff885e6c3a8800
[ 25.799478] ffff885e6c3a8880 ffff885f9c59ea80 ffff885e6c3a880c
ffff885e6bc78000
[ 25.799481] Call Trace:
[ 25.799492] [<ffffffff81329090>] dump_stack+0x44/0x64
[ 25.799496] [<ffffffff810862c6>] warn_slowpath_common+0x86/0xc0
[ 25.799499] [<ffffffff8108640a>] warn_slowpath_null+0x1a/0x20
[ 25.799502] [<ffffffff8130ef23>] add_disk+0x443/0x4a0
[ 25.799508] [<ffffffffa0086a35>] sd_probe_async+0x115/0x1d0 [sd_mod]
[ 25.799511] [<ffffffff810a70fa>] async_run_entry_fn+0x4a/0x140
[ 25.799515] [<ffffffff8109e09c>] process_one_work+0x14c/0x3c0
[ 25.799517] [<ffffffff8109e8d4>] worker_thread+0x114/0x470
[ 25.799520] [<ffffffff8109e7c0>] ? rescuer_thread+0x310/0x310
[ 25.799524] [<ffffffff810a43d8>] kthread+0xd8/0xf0
[ 25.799527] [<ffffffff810a4300>] ? kthread_park+0x60/0x60
[ 25.799532] [<ffffffff8169490f>] ret_from_fork+0x3f/0x70
[ 25.799535] [<ffffffff810a4300>] ? kthread_park+0x60/0x60
[ 25.799538] ---[ end trace 5d59079faf7d2510 ]---
[ 25.799568] sd 3:0:0:2: [sdc] Attached SCSI disk
[ 25.808827] scsi 3:0:0:0: Unexpected response from lun 2 while scanning,
scan aborted
[ 25.810073] scsi host6: iSCSI Initiator over TCP/IP
[ 25.811250] scsi 4:0:0:3: Direct-Access LIO-ORG san-disk-3 4.0
PQ: 0 ANSI: 5
[ 25.811776] sd 4:0:0:3: alua: supports implicit and explicit TPGS
[ 25.811914] sd 4:0:0:3: [sdd] 9765625856 512-byte logical blocks: (5.00
TB/4.54 TiB)
[ 25.811958] sd 4:0:0:3: alua: No target port descriptors found
[ 25.811961] sd 4:0:0:3: alua: Attach failed (-22)
[ 25.811964] sd 4:0:0:3: failed to add device handler: -22
[ 25.812001] sd 4:0:0:3: [sdd] Write Protect is off
[ 25.812005] sd 4:0:0:3: [sdd] Mode Sense: 00 00 00 00
[ 25.812009] sd 4:0:0:3: [sdd] Asking for cache data failed
[ 25.812011] sd 4:0:0:3: [sdd] Assuming drive cache: write through
[ 25.815398] sd 4:0:0:3: [sdd] Attached SCSI disk
[ 25.819131] ixgbe 0000:04:00.1: SR-IOV enabled with 8 VFs
[ 25.819134] ixgbe 0000:04:00.1: configure port vlans to keep your VFs secure
[ 25.824709] scsi 4:0:0:0: Unexpected response from lun 3 while scanning,
scan aborted
[ 25.832694] scsi 6:0:0:4: Direct-Access LIO-ORG san-disk-4 4.0
PQ: 0 ANSI: 5
[ 25.832921] scsi 5:0:0:1: Direct-Access LIO-ORG san-disk-1 4.0
PQ: 0 ANSI: 5
[ 25.833195] sd 6:0:0:4: alua: supports implicit and explicit TPGS
[ 25.833360] sd 6:0:0:4: alua: No target port descriptors found
[ 25.833363] sd 6:0:0:4: alua: Attach failed (-22)
[ 25.833365] sd 6:0:0:4: failed to add device handler: -22
[ 25.833394] sd 5:0:0:1: alua: supports implicit and explicit TPGS
[ 25.851814] sd 6:0:0:4: [sde] 10742171648 512-byte logical blocks: (5.49
TB/5.00 TiB)
[ 25.851820] sd 5:0:0:1: [sdf] 7812499389 512-byte logical blocks: (3.99
TB/3.63 TiB)
[ 25.851821] sd 6:0:0:4: [sde] Write Protect is off
[ 25.851823] sd 6:0:0:4: [sde] Mode Sense: 00 00 00 00
[ 25.851825] sd 6:0:0:4: [sde] Asking for cache data failed
[ 25.851827] sd 6:0:0:4: [sde] Assuming drive cache: write through
[ 25.851843] sd 5:0:0:1: alua: No target port descriptors found
[ 25.851847] sd 5:0:0:1: alua: Attach failed (-22)
[ 25.851849] sd 5:0:0:1: failed to add device handler: -22
[ 25.851946] sd 5:0:0:1: [sdf] Write Protect is off
[ 25.851948] sd 5:0:0:1: [sdf] Mode Sense: 00 00 00 00
[ 25.851949] sd 5:0:0:1: [sdf] Asking for cache data failed
[ 25.851951] sd 5:0:0:1: [sdf] Assuming drive cache: write through
[ 25.852160] sd 6:0:0:4: [sde] Attached SCSI disk
[ 25.852172] sd 5:0:0:1: [sdf] Attached SCSI disk
[ 25.854892] scsi 6:0:0:0: Unexpected response from lun 4 while scanning,
scan aborted
[ 25.862806] scsi 5:0:0:0: Unexpected response from lun 1 while scanning,
scan aborted
[ 25.890721] ixgbe 0000:04:00.0 enp4s0f0: detected SFP+: 7
[ 25.919701] pci 0000:04:10.1: [8086:10ed] type 00 class 0x020000
[ 25.919738] pci 0000:04:10.1: can't set Max Payload Size to 256; if
necessary, use "pci=pcie_bus_safe" and report a bug
[ 25.919863] iommu: Adding device 0000:04:10.1 to group 88
[ 25.919920] pci 0000:04:10.3: [8086:10ed] type 00 class 0x020000
[ 25.919951] pci 0000:04:10.3: can't set Max Payload Size to 256; if
necessary, use "pci=pcie_bus_safe" and report a bug
[ 25.920013] iommu: Adding device 0000:04:10.3 to group 89
[ 25.920039] pci 0000:04:10.5: [8086:10ed] type 00 class 0x020000
[ 25.920069] pci 0000:04:10.5: can't set Max Payload Size to 256; if
necessary, use "pci=pcie_bus_safe" and report a bug
[ 25.920127] iommu: Adding device 0000:04:10.5 to group 90
[ 25.920151] pci 0000:04:10.7: [8086:10ed] type 00 class 0x020000
[ 25.920182] pci 0000:04:10.7: can't set Max Payload Size to 256; if
necessary, use "pci=pcie_bus_safe" and report a bug
[ 25.920239] iommu: Adding device 0000:04:10.7 to group 91
[ 25.920263] pci 0000:04:11.1: [8086:10ed] type 00 class 0x020000
[ 25.920293] pci 0000:04:11.1: can't set Max Payload Size to 256; if
necessary, use "pci=pcie_bus_safe" and report a bug
[ 25.920349] iommu: Adding device 0000:04:11.1 to group 92
[ 25.920373] pci 0000:04:11.3: [8086:10ed] type 00 class 0x020000
[ 25.920403] pci 0000:04:11.3: can't set Max Payload Size to 256; if
necessary, use "pci=pcie_bus_safe" and report a bug
[ 25.920459] iommu: Adding device 0000:04:11.3 to group 93
[ 25.920485] pci 0000:04:11.5: [8086:10ed] type 00 class 0x020000
[ 25.920515] pci 0000:04:11.5: can't set Max Payload Size to 256; if
necessary, use "pci=pcie_bus_safe" and report a bug
[ 25.920570] iommu: Adding device 0000:04:11.5 to group 94
[ 25.920594] pci 0000:04:11.7: [8086:10ed] type 00 class 0x020000
[ 25.920624] pci 0000:04:11.7: can't set Max Payload Size to 256; if
necessary, use "pci=pcie_bus_safe" and report a bug
[ 25.920698] iommu: Adding device 0000:04:11.7 to group 95
[ 25.921365] ixgbe 0000:04:00.1: removed PHC on enp4s0f1
[ 26.020448] ixgbe 0000:04:00.1: registered PHC device on enp4s0f1
[ 26.185674] ixgbe 0000:04:00.1 enp4s0f1: detected SFP+: 4
[ 26.380954] i40e 0000:06:00.0 enp6s0f0: adding 68:05:ca:37:26:90 vid=0
[ 26.392266] i40e 0000:06:00.0: Allocating 8 VFs.
[ 26.492733] pci 0000:06:02.0: [8086:154c] type 00 class 0x020000
[ 26.492785] pci 0000:06:02.0: Max Payload Size set to 256 (was 128, max
2048)
[ 26.493016] iommu: Adding device 0000:06:02.0 to group 96
[ 26.493114] pci 0000:06:02.1: [8086:154c] type 00 class 0x020000
[ 26.493159] pci 0000:06:02.1: Max Payload Size set to 256 (was 128, max
2048)
[ 26.493259] iommu: Adding device 0000:06:02.1 to group 97
[ 26.493309] pci 0000:06:02.2: [8086:154c] type 00 class 0x020000
[ 26.493352] pci 0000:06:02.2: Max Payload Size set to 256 (was 128, max
2048)
[ 26.493452] iommu: Adding device 0000:06:02.2 to group 98
[ 26.493501] pci 0000:06:02.3: [8086:154c] type 00 class 0x020000
[ 26.493545] pci 0000:06:02.3: Max Payload Size set to 256 (was 128, max
2048)
[ 26.493655] iommu: Adding device 0000:06:02.3 to group 99
[ 26.493707] pci 0000:06:02.4: [8086:154c] type 00 class 0x020000
[ 26.493751] pci 0000:06:02.4: Max Payload Size set to 256 (was 128, max
2048)
[ 26.493856] iommu: Adding device 0000:06:02.4 to group 100
[ 26.493902] pci 0000:06:02.5: [8086:154c] type 00 class 0x020000
[ 26.493945] pci 0000:06:02.5: Max Payload Size set to 256 (was 128, max
2048)
[ 26.494046] iommu: Adding device 0000:06:02.5 to group 101
[ 26.494103] pci 0000:06:02.6: [8086:154c] type 00 class 0x020000
[ 26.494147] pci 0000:06:02.6: Max Payload Size set to 256 (was 128, max
2048)
[ 26.494247] iommu: Adding device 0000:06:02.6 to group 102
[ 26.494295] pci 0000:06:02.7: [8086:154c] type 00 class 0x020000
[ 26.494339] pci 0000:06:02.7: Max Payload Size set to 256 (was 128, max
2048)
[ 26.494446] iommu: Adding device 0000:06:02.7 to group 103
[ 26.977585] i40e 0000:06:00.1 enp6s0f1: adding 68:05:ca:37:26:91 vid=0
[ 26.985175] i40e 0000:06:00.1: Allocating 8 VFs.
[ 27.085659] pci 0000:06:0a.0: [8086:154c] type 00 class 0x020000
[ 27.085704] pci 0000:06:0a.0: Max Payload Size set to 256 (was 128, max
2048)
[ 27.085868] iommu: Adding device 0000:06:0a.0 to group 104
[ 27.085938] pci 0000:06:0a.1: [8086:154c] type 00 class 0x020000
[ 27.085977] pci 0000:06:0a.1: Max Payload Size set to 256 (was 128, max
2048)
[ 27.086047] iommu: Adding device 0000:06:0a.1 to group 105
[ 27.086076] pci 0000:06:0a.2: [8086:154c] type 00 class 0x020000
[ 27.086114] pci 0000:06:0a.2: Max Payload Size set to 256 (was 128, max
2048)
[ 27.086184] iommu: Adding device 0000:06:0a.2 to group 106
[ 27.086213] pci 0000:06:0a.3: [8086:154c] type 00 class 0x020000
[ 27.086251] pci 0000:06:0a.3: Max Payload Size set to 256 (was 128, max
2048)
[ 27.086321] iommu: Adding device 0000:06:0a.3 to group 107
[ 27.086349] pci 0000:06:0a.4: [8086:154c] type 00 class 0x020000
[ 27.086386] pci 0000:06:0a.4: Max Payload Size set to 256 (was 128, max
2048)
[ 27.086454] iommu: Adding device 0000:06:0a.4 to group 108
[ 27.086485] pci 0000:06:0a.5: [8086:154c] type 00 class 0x020000
[ 27.086533] pci 0000:06:0a.5: Max Payload Size set to 256 (was 128, max
2048)
[ 27.086637] iommu: Adding device 0000:06:0a.5 to group 109
[ 27.086674] pci 0000:06:0a.6: [8086:154c] type 00 class 0x020000
[ 27.086732] pci 0000:06:0a.6: Max Payload Size set to 256 (was 128, max
2048)
[ 27.086829] iommu: Adding device 0000:06:0a.6 to group 110
[ 27.086860] pci 0000:06:0a.7: [8086:154c] type 00 class 0x020000
[ 27.086908] pci 0000:06:0a.7: Max Payload Size set to 256 (was 128, max
2048)
[ 27.087045] iommu: Adding device 0000:06:0a.7 to group 111
[ 27.266965] device qg-3e44de10-3d left promiscuous mode
[ 27.313043] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 27.545545] i40e 0000:83:00.0 enp131s0f0: adding 68:05:ca:3a:a3:60 vid=0
[ 27.558666] i40e 0000:83:00.0: Allocating 8 VFs.
[ 27.639645] device qr-912a3637-a9 left promiscuous mode
[ 27.659650] pci 0000:83:02.0: [8086:154c] type 00 class 0x020000
[ 27.659698] pci 0000:83:02.0: Max Payload Size set to 256 (was 128, max
2048)
[ 27.659919] iommu: Adding device 0000:83:02.0 to group 112
[ 27.660016] pci 0000:83:02.1: [8086:154c] type 00 class 0x020000
[ 27.660055] pci 0000:83:02.1: Max Payload Size set to 256 (was 128, max
2048)
[ 27.660146] iommu: Adding device 0000:83:02.1 to group 113
[ 27.660191] pci 0000:83:02.2: [8086:154c] type 00 class 0x020000
[ 27.660230] pci 0000:83:02.2: Max Payload Size set to 256 (was 128, max
2048)
[ 27.660327] iommu: Adding device 0000:83:02.2 to group 114
[ 27.660410] pci 0000:83:02.3: [8086:154c] type 00 class 0x020000
[ 27.660449] pci 0000:83:02.3: Max Payload Size set to 256 (was 128, max
2048)
[ 27.660537] iommu: Adding device 0000:83:02.3 to group 115
[ 27.660584] pci 0000:83:02.4: [8086:154c] type 00 class 0x020000
[ 27.660634] pci 0000:83:02.4: Max Payload Size set to 256 (was 128, max
2048)
[ 27.660725] iommu: Adding device 0000:83:02.4 to group 116
[ 27.660771] pci 0000:83:02.5: [8086:154c] type 00 class 0x020000
[ 27.660809] pci 0000:83:02.5: Max Payload Size set to 256 (was 128, max
2048)
[ 27.660901] iommu: Adding device 0000:83:02.5 to group 117
[ 27.660950] pci 0000:83:02.6: [8086:154c] type 00 class 0x020000
[ 27.660989] pci 0000:83:02.6: Max Payload Size set to 256 (was 128, max
2048)
[ 27.661078] iommu: Adding device 0000:83:02.6 to group 118
[ 27.661121] pci 0000:83:02.7: [8086:154c] type 00 class 0x020000
[ 27.661160] pci 0000:83:02.7: Max Payload Size set to 256 (was 128, max
2048)
[ 27.661246] iommu: Adding device 0000:83:02.7 to group 119
[ 27.695063] Ebtables v2.0 registered
[ 28.075814] i40e 0000:83:00.1 enp131s0f1: adding 68:05:ca:3a:a3:61 vid=0
[ 28.086628] i40e 0000:83:00.1: Allocating 8 VFs.
[ 28.108753] device qr-9cc0be6f-14 left promiscuous mode
[ 28.187599] pci 0000:83:0a.0: [8086:154c] type 00 class 0x020000
[ 28.187641] pci 0000:83:0a.0: Max Payload Size set to 256 (was 128, max
2048)
[ 28.187813] iommu: Adding device 0000:83:0a.0 to group 120
[ 28.187885] pci 0000:83:0a.1: [8086:154c] type 00 class 0x020000
[ 28.187921] pci 0000:83:0a.1: Max Payload Size set to 256 (was 128, max
2048)
[ 28.187993] iommu: Adding device 0000:83:0a.1 to group 121
[ 28.188028] pci 0000:83:0a.2: [8086:154c] type 00 class 0x020000
[ 28.188064] pci 0000:83:0a.2: Max Payload Size set to 256 (was 128, max
2048)
[ 28.188136] iommu: Adding device 0000:83:0a.2 to group 122
[ 28.188169] pci 0000:83:0a.3: [8086:154c] type 00 class 0x020000
[ 28.188205] pci 0000:83:0a.3: Max Payload Size set to 256 (was 128, max
2048)
[ 28.188272] iommu: Adding device 0000:83:0a.3 to group 123
[ 28.188305] pci 0000:83:0a.4: [8086:154c] type 00 class 0x020000
[ 28.188340] pci 0000:83:0a.4: Max Payload Size set to 256 (was 128, max
2048)
[ 28.188425] iommu: Adding device 0000:83:0a.4 to group 124
[ 28.188468] pci 0000:83:0a.5: [8086:154c] type 00 class 0x020000
[ 28.188503] pci 0000:83:0a.5: Max Payload Size set to 256 (was 128, max
2048)
[ 28.188620] iommu: Adding device 0000:83:0a.5 to group 125
[ 28.188659] pci 0000:83:0a.6: [8086:154c] type 00 class 0x020000
[ 28.188694] pci 0000:83:0a.6: Max Payload Size set to 256 (was 128, max
2048)
[ 28.188838] iommu: Adding device 0000:83:0a.6 to group 126
[ 28.188887] pci 0000:83:0a.7: [8086:154c] type 00 class 0x020000
[ 28.188922] pci 0000:83:0a.7: Max Payload Size set to 256 (was 128, max
2048)
[ 28.189083] iommu: Adding device 0000:83:0a.7 to group 127
[ 28.282306] device qr-e1f33440-0c left promiscuous mode
[ 28.360312] device tap502560f9-d8 left promiscuous mode
[ 28.396800] device tap9b0fa827-27 left promiscuous mode
[ 28.472534] device tapd10cc73d-3b left promiscuous mode
[ 29.801012] ixgbe 0000:04:00.0 enp4s0f0: NIC Link is Up 10 Gbps, Flow
Control: RX/TX
[ 41.221646] IPv6: ADDRCONF(NETDEV_UP): qvb7f4dce60-91: link is not ready
[ 41.308303] device qvb7f4dce60-91 entered promiscuous mode
[ 41.416683] IPv6: ADDRCONF(NETDEV_CHANGE): qvb7f4dce60-91: link becomes
ready
[ 41.506396] device qvo7f4dce60-91 entered promiscuous mode
[ 41.655044] qbr7f4dce60-91: port 1(qvb7f4dce60-91) entered forwarding state
[ 41.655051] qbr7f4dce60-91: port 1(qvb7f4dce60-91) entered forwarding state
[ 42.000932] Netfilter messages via NETLINK v0.30.
[ 42.014636] ip_set: protocol 6
[ 89.625075] device tap9b0fa827-27 entered promiscuous mode
[ 89.633839] device tap502560f9-d8 entered promiscuous mode
[ 89.635991] device tapd10cc73d-3b entered promiscuous mode
[ 89.877049] device qr-912a3637-a9 entered promiscuous mode
[ 90.138414] device qr-9cc0be6f-14 entered promiscuous mode
[ 90.414338] device qr-e1f33440-0c entered promiscuous mode
[ 90.702716] device qg-3e44de10-3d entered promiscuous mode
[ 980.670259] Unable to load target_core_user
[ 994.343776] scsi host7: iSCSI Initiator over TCP/IP
[ 994.361276] scsi 7:0:0:0: Direct-Access LIO-ORG IBLOCK 4.0
PQ: 0 ANSI: 5
[ 994.361705] sd 7:0:0:0: alua: supports implicit and explicit TPGS
[ 994.361794] TARGET_CORE[iSCSI]: Expected Transfer Length: 264 does not match
SCSI CDB Length: 8 for SAM Opcode: 0x12
[ 994.361830] sd 7:0:0:0: alua: No target port descriptors found
[ 994.361833] sd 7:0:0:0: alua: Attach failed (-22)
[ 994.361862] sd 7:0:0:0: [sdg] 115343360 512-byte logical blocks: (59.0
GB/55.0 GiB)
[ 994.361868] sd 7:0:0:0: failed to add device handler: -22
[ 994.361911] sd 7:0:0:0: [sdg] Write Protect is off
[ 994.361914] sd 7:0:0:0: [sdg] Mode Sense: 00 00 00 00
[ 994.361916] sd 7:0:0:0: [sdg] Asking for cache data failed
[ 994.361937] sd 7:0:0:0: [sdg] Assuming drive cache: write through
[ 994.363181] sd 7:0:0:0: [sdg] Attached SCSI disk
[ 994.506461] scsi 7:0:0:0: Direct-Access LIO-ORG IBLOCK 4.0
PQ: 0 ANSI: 5
[ 994.506822] ------------[ cut here ]------------
[ 994.506828] WARNING: CPU: 1 PID: 10460 at fs/sysfs/dir.c:31
sysfs_warn_dup+0x64/0x80()
[ 994.506829] sysfs: cannot create duplicate filename
'/bus/scsi/devices/7:0:0:0'
[ 994.506830] Modules linked in: target_core_pscsi target_core_file
target_core_iblock xt_REDIRECT nf_nat_redirect xt_nat xt_mark xt_CHECKSUM
nf_conntrack_ipv6 xt_mac xt_physdev xt_set xt_conntrack iptable_raw
ip_set_hash_net ip_set nfnetlink veth ebtable_filter ebtables ip6table_filter
ip6_tables iscsi_tcp libiscsi_tcp 8021q garp mrp rpcrdma ib_isert
iscsi_target_mod ib_iser libiscsi scsi_transport_iscsi ib_srpt target_core_mod
openvswitch bonding ib_srp scsi_transport_srp ib_ipoib nf_defrag_ipv6 rdma_ucm
ib_ucm ib_uverbs ib_umad rdma_cm ib_cm iw_cm ib_sa ib_mad usnic_verbs ib_core
xt_comment xt_multiport iptable_filter ib_addr iptable_nat nf_conntrack_ipv4
nf_defrag_ipv4 x86_pkg_temp_thermal nf_nat_ipv4 intel_powerclamp nf_nat
coretemp kvm_intel nf_conntrack kvm iptable_mangle irqbypass crct10dif_pclmul
[ 994.506873] crc32_pclmul nfsd aesni_intel lrw gf128mul glue_helper
ablk_helper cryptd ses enclosure sb_edac sg auth_rpcgss edac_core iTCO_wdt
ipmi_devintf iTCO_vendor_support nfs_acl lockd shpchp pcspkr lpc_ich ipmi_si
ipmi_msghandler mfd_core wmi acpi_power_meter grace sunrpc br_netfilter bridge
stp llc dm_multipath ip_tables xfs libcrc32c sd_mod mgag200 drm_kms_helper
syscopyarea sysfillrect sysimgblt fb_sys_fops ttm ixgbe(O) drm fnic i40e
libfcoe igb megaraid_sas enic libfc crc32c_intel vxlan ip6_udp_tunnel
udp_tunnel ptp scsi_transport_fc i2c_algo_bit dca i2c_core pps_core dm_mirror
dm_region_hash dm_log dm_mod
[ 994.506906] CPU: 1 PID: 10460 Comm: iscsiadm Tainted: G W O 4.4.0
#1
[ 994.506907] Hardware name: Cisco Systems Inc UCSC-C240-M3S/UCSC-C240-M3S,
BIOS C240M3.2.0.8.0.071620152208 07/16/2015
[ 994.506909] 0000000000000000 00000000c99ac6bd ffff882d19f07948
ffffffff81329090
[ 994.506910] ffff882d19f07990 ffff882d19f07980 ffffffff810862c6
ffff882d4b39d000
[ 994.506912] ffff882fa039c858 ffff882fa50dee10 0000000000000001
ffffffffffffffef
[ 994.506914] Call Trace:
[ 994.506920] [<ffffffff81329090>] dump_stack+0x44/0x64
[ 994.506931] [<ffffffff810862c6>] warn_slowpath_common+0x86/0xc0
[ 994.506932] [<ffffffff8108635c>] warn_slowpath_fmt+0x5c/0x80
[ 994.506936] [<ffffffff8127e9a8>] ? kernfs_path+0x48/0x60
[ 994.506937] [<ffffffff81282014>] sysfs_warn_dup+0x64/0x80
[ 994.506939] [<ffffffff812823aa>] sysfs_do_create_link_sd.isra.2+0xaa/0xb0
[ 994.506940] [<ffffffff812823d5>] sysfs_create_link+0x25/0x40
[ 994.506944] [<ffffffff81454a6b>] bus_add_device+0x10b/0x1f0
[ 994.506946] [<ffffffff81452815>] device_add+0x3b5/0x610
[ 994.506949] [<ffffffff81487df5>] scsi_sysfs_add_sdev+0xa5/0x290
[ 994.506951] [<ffffffff81485355>] scsi_probe_and_add_lun+0xb65/0xd80
[ 994.506955] [<ffffffff814608ac>] ? __pm_runtime_resume+0x5c/0x70
[ 994.506957] [<ffffffff81485d67>] __scsi_scan_target+0xf7/0x260
[ 994.506958] [<ffffffff814608ac>] ? __pm_runtime_resume+0x5c/0x70
[ 994.506960] [<ffffffff81485fa7>] scsi_scan_target+0xd7/0xf0
[ 994.506967] [<ffffffffa07529f5>]
iscsi_user_scan_session.part.14+0x105/0x140 [scsi_transport_iscsi]
[ 994.506971] [<ffffffffa0752a30>] ?
iscsi_user_scan_session.part.14+0x140/0x140 [scsi_transport_iscsi]
[ 994.506975] [<ffffffffa0752a4e>] iscsi_user_scan_session+0x1e/0x30
[scsi_transport_iscsi]
[ 994.506976] [<ffffffff81450b80>] device_for_each_child+0x50/0x90
[ 994.506980] [<ffffffffa075083d>] iscsi_user_scan+0x3d/0x60
[scsi_transport_iscsi]
[ 994.506982] [<ffffffff81487bb6>] store_scan+0xa6/0x100
[ 994.506985] [<ffffffff811e3158>] ? __kmalloc+0x1b8/0x250
[ 994.506988] [<ffffffff81450318>] dev_attr_store+0x18/0x30
[ 994.506989] [<ffffffff8128170a>] sysfs_kf_write+0x3a/0x50
[ 994.506991] [<ffffffff81280d90>] kernfs_fop_write+0x120/0x170
[ 994.506993] [<ffffffff81203f17>] __vfs_write+0x37/0x100
[ 994.506995] [<ffffffff812b6c03>] ? selinux_file_permission+0xc3/0x110
[ 994.506999] [<ffffffff812ae75d>] ? security_file_permission+0x3d/0xc0
[ 994.507002] [<ffffffff810cd95f>] ? percpu_down_read+0x1f/0x50
[ 994.507003] [<ffffffff812045f2>] vfs_write+0xa2/0x1a0
[ 994.507006] [<ffffffff81003176>] ? do_audit_syscall_entry+0x66/0x70
[ 994.507008] [<ffffffff812053b5>] SyS_write+0x55/0xc0
[ 994.507011] [<ffffffff816945ae>] entry_SYSCALL_64_fastpath+0x12/0x71
[ 994.507012] ---[ end trace 5d59079faf7d2511 ]---
[ 994.507042] scsi 7:0:0:0: failed to add device: -17
[ 994.986819] scsi host8: iSCSI Initiator over TCP/IP
[ 995.001630] scsi 8:0:0:0: Direct-Access LIO-ORG IBLOCK 4.0
PQ: 0 ANSI: 5
[ 995.001995] sd 8:0:0:0: alua: supports implicit and explicit TPGS
[ 995.002076] TARGET_CORE[iSCSI]: Expected Transfer Length: 264 does not match
SCSI CDB Length: 8 for SAM Opcode: 0x12
[ 995.002117] sd 8:0:0:0: alua: No target port descriptors found
[ 995.002119] sd 8:0:0:0: alua: Attach failed (-22)
[ 995.002141] sd 8:0:0:0: [sdh] 2097152 512-byte logical blocks: (1.07 GB/1.00
GiB)
[ 995.002142] sd 8:0:0:0: failed to add device handler: -22
[ 995.002187] sd 8:0:0:0: [sdh] Write Protect is off
[ 995.002189] sd 8:0:0:0: [sdh] Mode Sense: 00 00 00 00
[ 995.002191] sd 8:0:0:0: [sdh] Asking for cache data failed
[ 995.002211] sd 8:0:0:0: [sdh] Assuming drive cache: write through
[ 995.002612] sd 8:0:0:0: [sdh] Attached SCSI disk
[ 995.150008] scsi 8:0:0:0: Direct-Access LIO-ORG IBLOCK 4.0
PQ: 0 ANSI: 5
[ 995.150316] ------------[ cut here ]------------
[ 995.150321] WARNING: CPU: 2 PID: 10504 at fs/sysfs/dir.c:31
sysfs_warn_dup+0x64/0x80()
[ 995.150322] sysfs: cannot create duplicate filename
'/bus/scsi/devices/8:0:0:0'
[ 995.150323] Modules linked in: target_core_pscsi target_core_file
target_core_iblock xt_REDIRECT nf_nat_redirect xt_nat xt_mark xt_CHECKSUM
nf_conntrack_ipv6 xt_mac xt_physdev xt_set xt_conntrack iptable_raw
ip_set_hash_net ip_set nfnetlink veth ebtable_filter ebtables ip6table_filter
ip6_tables iscsi_tcp libiscsi_tcp 8021q garp mrp rpcrdma ib_isert
iscsi_target_mod ib_iser libiscsi scsi_transport_iscsi ib_srpt target_core_mod
openvswitch bonding ib_srp scsi_transport_srp ib_ipoib nf_defrag_ipv6 rdma_ucm
ib_ucm ib_uverbs ib_umad rdma_cm ib_cm iw_cm ib_sa ib_mad usnic_verbs ib_core
xt_comment xt_multiport iptable_filter ib_addr iptable_nat nf_conntrack_ipv4
nf_defrag_ipv4 x86_pkg_temp_thermal nf_nat_ipv4 intel_powerclamp nf_nat
coretemp kvm_intel nf_conntrack kvm iptable_mangle irqbypass crct10dif_pclmul
[ 995.150367] crc32_pclmul nfsd aesni_intel lrw gf128mul glue_helper
ablk_helper cryptd ses enclosure sb_edac sg auth_rpcgss edac_core iTCO_wdt
ipmi_devintf iTCO_vendor_support nfs_acl lockd shpchp pcspkr lpc_ich ipmi_si
ipmi_msghandler mfd_core wmi acpi_power_meter grace sunrpc br_netfilter bridge
stp llc dm_multipath ip_tables xfs libcrc32c sd_mod mgag200 drm_kms_helper
syscopyarea sysfillrect sysimgblt fb_sys_fops ttm ixgbe(O) drm fnic i40e
libfcoe igb megaraid_sas enic libfc crc32c_intel vxlan ip6_udp_tunnel
udp_tunnel ptp scsi_transport_fc i2c_algo_bit dca i2c_core pps_core dm_mirror
dm_region_hash dm_log dm_mod
[ 995.150399] CPU: 2 PID: 10504 Comm: iscsiadm Tainted: G W O 4.4.0
#1
[ 995.150400] Hardware name: Cisco Systems Inc UCSC-C240-M3S/UCSC-C240-M3S,
BIOS C240M3.2.0.8.0.071620152208 07/16/2015
[ 995.150402] 0000000000000000 0000000000b57f59 ffff882d19ffb948
ffffffff81329090
[ 995.150404] ffff882d19ffb990 ffff882d19ffb980 ffffffff810862c6
ffff88007ac62000
[ 995.150405] ffff882f9f889900 ffff882fa50dee10 0000000000000001
ffffffffffffffef
[ 995.150407] Call Trace:
[ 995.150412] [<ffffffff81329090>] dump_stack+0x44/0x64
[ 995.150415] [<ffffffff810862c6>] warn_slowpath_common+0x86/0xc0
[ 995.150416] [<ffffffff8108635c>] warn_slowpath_fmt+0x5c/0x80
[ 995.150419] [<ffffffff8127e9a8>] ? kernfs_path+0x48/0x60
[ 995.150420] [<ffffffff81282014>] sysfs_warn_dup+0x64/0x80
[ 995.150435] [<ffffffff812823aa>] sysfs_do_create_link_sd.isra.2+0xaa/0xb0
[ 995.150437] [<ffffffff812823d5>] sysfs_create_link+0x25/0x40
[ 995.150440] [<ffffffff81454a6b>] bus_add_device+0x10b/0x1f0
[ 995.150442] [<ffffffff81452815>] device_add+0x3b5/0x610
[ 995.150445] [<ffffffff81487df5>] scsi_sysfs_add_sdev+0xa5/0x290
[ 995.150447] [<ffffffff81485355>] scsi_probe_and_add_lun+0xb65/0xd80
[ 995.150451] [<ffffffff814608ac>] ? __pm_runtime_resume+0x5c/0x70
[ 995.150453] [<ffffffff81485d67>] __scsi_scan_target+0xf7/0x260
[ 995.150454] [<ffffffff814608ac>] ? __pm_runtime_resume+0x5c/0x70
[ 995.150456] [<ffffffff81485fa7>] scsi_scan_target+0xd7/0xf0
[ 995.150463] [<ffffffffa07529f5>]
iscsi_user_scan_session.part.14+0x105/0x140 [scsi_transport_iscsi]
[ 995.150467] [<ffffffffa0752a30>] ?
iscsi_user_scan_session.part.14+0x140/0x140 [scsi_transport_iscsi]
[ 995.150470] [<ffffffffa0752a4e>] iscsi_user_scan_session+0x1e/0x30
[scsi_transport_iscsi]
[ 995.150472] [<ffffffff81450b80>] device_for_each_child+0x50/0x90
[ 995.150475] [<ffffffffa075083d>] iscsi_user_scan+0x3d/0x60
[scsi_transport_iscsi]
[ 995.150477] [<ffffffff81487bb6>] store_scan+0xa6/0x100
[ 995.150494] [<ffffffff811e3158>] ? __kmalloc+0x1b8/0x250
[ 995.150498] [<ffffffff81450318>] dev_attr_store+0x18/0x30
[ 995.150499] [<ffffffff8128170a>] sysfs_kf_write+0x3a/0x50
[ 995.150500] [<ffffffff81280d90>] kernfs_fop_write+0x120/0x170
[ 995.150503] [<ffffffff81203f17>] __vfs_write+0x37/0x100
[ 995.150505] [<ffffffff812b6c03>] ? selinux_file_permission+0xc3/0x110
[ 995.150509] [<ffffffff812ae75d>] ? security_file_permission+0x3d/0xc0
[ 995.150512] [<ffffffff810cd95f>] ? percpu_down_read+0x1f/0x50
[ 995.150513] [<ffffffff812045f2>] vfs_write+0xa2/0x1a0
[ 995.150518] [<ffffffff81003176>] ? do_audit_syscall_entry+0x66/0x70
[ 995.150520] [<ffffffff812053b5>] SyS_write+0x55/0xc0
[ 995.150523] [<ffffffff816945ae>] entry_SYSCALL_64_fastpath+0x12/0x71
[ 995.150525] ---[ end trace 5d59079faf7d2512 ]---
[ 995.150556] scsi 8:0:0:0: failed to add device: -17
--
You are receiving this mail because:
You are the assignee for the bug.
^ permalink raw reply [flat|nested] 46+ messages in thread* [Bug 111441] iscsi fails to attach to targets
2016-01-28 22:51 [Bug 111441] New: iscsi fails to attach to targets bugzilla-daemon
` (3 preceding siblings ...)
2016-01-29 3:32 ` bugzilla-daemon
@ 2016-01-29 3:40 ` bugzilla-daemon
2016-01-29 12:04 ` bugzilla-daemon
` (14 subsequent siblings)
19 siblings, 0 replies; 46+ messages in thread
From: bugzilla-daemon @ 2016-01-29 3:40 UTC (permalink / raw)
To: linux-scsi
https://bugzilla.kernel.org/show_bug.cgi?id=111441
--- Comment #4 from Serguei Bezverkhi <sbezverk@cisco.com> ---
with kernel 4.4.0
lsscsi
[0:0:44:0] enclosu CISCO UCS 240 0809 -
[0:2:0:0] disk LSI MR9261-8i 2.13 /dev/sda
[0:2:1:0] disk LSI MR9261-8i 2.13 /dev/sdb
[3:0:0:2] type? vendor? model? rev? -
[4:0:0:3] type? vendor? model? rev? -
[5:0:0:1] type? vendor? model? rev? -
[6:0:0:4] type? vendor? model? rev? -
[7:0:0:0] type? vendor? model? rev? -
[8:0:0:0] type? vendor? model? rev? -
with kernel 3.10.0-327.4.4
lsscsi
[0:0:44:0] enclosu CISCO UCS 240 0809 -
[0:2:0:0] disk LSI MR9261-8i 2.13 /dev/sda
[0:2:1:0] disk LSI MR9261-8i 2.13 /dev/sdb
[3:0:0:2] disk LIO-ORG san-disk-2 4.0 /dev/sdc
[4:0:0:3] disk LIO-ORG san-disk-3 4.0 /dev/sdd
[5:0:0:1] disk LIO-ORG san-disk-1 4.0 /dev/sde
[6:0:0:4] disk LIO-ORG san-disk-4 4.0 /dev/sdf
--
You are receiving this mail because:
You are the assignee for the bug.
^ permalink raw reply [flat|nested] 46+ messages in thread* [Bug 111441] iscsi fails to attach to targets
2016-01-28 22:51 [Bug 111441] New: iscsi fails to attach to targets bugzilla-daemon
` (4 preceding siblings ...)
2016-01-29 3:40 ` bugzilla-daemon
@ 2016-01-29 12:04 ` bugzilla-daemon
2016-01-29 19:11 ` bugzilla-daemon
` (13 subsequent siblings)
19 siblings, 0 replies; 46+ messages in thread
From: bugzilla-daemon @ 2016-01-29 12:04 UTC (permalink / raw)
To: linux-scsi
https://bugzilla.kernel.org/show_bug.cgi?id=111441
--- Comment #5 from Serguei Bezverkhi <sbezverk@cisco.com> ---
Actually this server uses both cases: Local taregts (since it is OpenStack
server) and remote targets as it tries to mount 4 remotefile systems.
You are correct, I always use the same box I just change the kernel it is using
to boot. No other changes to the environment. I do not mind to load a test
kernel without that suspected patch, just get me the RPM.
As you can see the first type of traceback happens when the server tries to
attach to remote targets, the second type of traceback happens when I try to
start OpenStack instance with local LVM volume which is represented as a local
iscsi target. Please see below.
[Remote taregt case]
targetcli
targetcli shell version 2.1.fb41
Copyright 2011-2013 by Datera, Inc and others.
For help on commands, type 'help'.
/> ls
o- /
.........................................................................................................................
[...]
o- backstores
..............................................................................................................
[...]
| o- block
..................................................................................................
[Storage Objects: 0]
| o- fileio
.................................................................................................
[Storage Objects: 0]
| o- pscsi
..................................................................................................
[Storage Objects: 0]
| o- ramdisk
................................................................................................
[Storage Objects: 0]
o- iscsi
............................................................................................................
[Targets: 0]
o- loopback
.........................................................................................................
[Targets: 0]
/> exit
[ 25.670239] scsi host3: iSCSI Initiator over TCP/IP
[ 25.682122] scsi host4: iSCSI Initiator over TCP/IP
[ 25.692401] scsi host5: iSCSI Initiator over TCP/IP
[ 25.693530] scsi 3:0:0:2: Direct-Access LIO-ORG san-disk-2 4.0
PQ: 0 ANSI: 5 < ------------------------ Remote target
[ 25.693936] sd 3:0:0:2: alua: supports implicit and explicit TPGS
[ 25.694078] sd 3:0:0:2: alua: No target port descriptors found
[ 25.694080] sd 3:0:0:2: alua: Attach failed (-22)
[ 25.694081] sd 3:0:0:2: failed to add device handler: -22
[ 25.694121] sd 3:0:0:2: [sdc] 20507809792 512-byte logical blocks: (10.4
TB/9.54 TiB)
[ 25.694127] sd 3:0:0:2: [sdc] Write Protect is off
[ 25.694129] sd 3:0:0:2: [sdc] Mode Sense: 00 00 00 00
[ 25.694131] sd 3:0:0:2: [sdc] Asking for cache data failed
[ 25.694132] sd 3:0:0:2: [sdc] Assuming drive cache: write through
[ 25.695112] ------------[ cut here ]------------
[ 25.695119] WARNING: CPU: 12 PID: 841 at block/genhd.c:626
add_disk+0x443/0x4a0()
[ 25.695120] Modules linked in: iscsi_tcp libiscsi_tcp 8021q garp mrp rpcrdma
ib_isert iscsi_target_mod bonding ib_iser libiscsi scsi_transport_iscsi
openvswitch ib_srpt target_core_mod nf_defrag_ipv6 ib_srp scsi_transport_srp
ib_ipoib rdma_ucm ib_ucm ib_uverbs ib_umad rdma_cm ib_cm iw_cm xt_comment
xt_multiport ib_sa iptable_filter ib_mad iptable_nat nf_conntrack_ipv4
usnic_verbs nf_defrag_ipv4 nf_nat_ipv4 nf_nat nf_conntrack ib_core ib_addr
iptable_mangle x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel kvm
irqbypass crct10dif_pclmul crc32_pclmul aesni_intel nfsd lrw gf128mul
glue_helper ablk_helper ses cryptd enclosure ipmi_devintf sg sb_edac iTCO_wdt
shpchp edac_core iTCO_vendor_support ipmi_si pcspkr lpc_ich ipmi_msghandler
mfd_core auth_rpcgss acpi_power_meter wmi nfs_acl lockd br_netfilter
[ 25.695161] grace sunrpc bridge stp llc dm_multipath ip_tables xfs
libcrc32c sd_mod mgag200 drm_kms_helper syscopyarea sysfillrect sysimgblt
fb_sys_fops ttm drm ixgbe(O) fnic i40e libfcoe igb crc32c_intel megaraid_sas
enic libfc vxlan ip6_udp_tunnel udp_tunnel ptp scsi_transport_fc i2c_algo_bit
i2c_core pps_core dca dm_mirror dm_region_hash dm_log dm_mod
[ 25.695183] CPU: 12 PID: 841 Comm: kworker/u82:2 Tainted: G O
4.4.0 #1
[ 25.695185] Hardware name: Cisco Systems Inc UCSC-C240-M3S/UCSC-C240-M3S,
BIOS C240M3.2.0.8.0.071620152208 07/16/2015
[ 25.695189] Workqueue: events_unbound async_run_entry_fn
[ 25.695191] 0000000000000000 000000004b5682c8 ffff885f9b887cf8
ffffffff81329090
[ 25.695193] 0000000000000000 ffff885f9b887d30 ffffffff810862c6
ffff885fa5ef2000
[ 25.695194] ffff885fa5ef2080 ffff885f9d2fe1a0 ffff885fa5ef200c
ffff885f86b10000
[ 25.695196] Call Trace:
[ 25.695204] [<ffffffff81329090>] dump_stack+0x44/0x64
[ 25.695207] [<ffffffff810862c6>] warn_slowpath_common+0x86/0xc0
[ 25.695209] [<ffffffff8108640a>] warn_slowpath_null+0x1a/0x20
[ 25.695210] [<ffffffff8130ef23>] add_disk+0x443/0x4a0
[ 25.695216] [<ffffffffa008ba35>] sd_probe_async+0x115/0x1d0 [sd_mod]
[ 25.695217] [<ffffffff810a70fa>] async_run_entry_fn+0x4a/0x140
[ 25.695220] [<ffffffff8109e09c>] process_one_work+0x14c/0x3c0
[ 25.695221] [<ffffffff8109e8d4>] worker_thread+0x114/0x470
[ 25.695226] [<ffffffff816905ba>] ? __schedule+0x2aa/0x700
[ 25.695237] [<ffffffff8109e7c0>] ? rescuer_thread+0x310/0x310
[ 25.695241] [<ffffffff810a43d8>] kthread+0xd8/0xf0
[ 25.695243] [<ffffffff810a4300>] ? kthread_park+0x60/0x60
[ 25.695245] [<ffffffff8169490f>] ret_from_fork+0x3f/0x70
[ 25.695247] [<ffffffff810a4300>] ? kthread_park+0x60/0x60
[ 25.695248] ---[ end trace bcfb1475313b5f60 ]---
[ 25.695262] sd 3:0:0:2: [sdc] Attached SCSI disk
[ 25.703053] scsi host6: iSCSI Initiator over TCP/IP
[ 25.704370] scsi 3:0:0:0: Unexpected response from lun 2 while scanning,
scan aborted
[local target case]
/> ls
o- /
.........................................................................................................................
[...]
o- backstores
..............................................................................................................
[...]
| o- block
..................................................................................................
[Storage Objects: 1]
| | o- iqn.2010-10.org.openstack:volume-07e39fbc-4767-4455-bb96-c6b53be6a10c
[/dev/cinder-volumes-local/volume-07e39fbc-4767-4455-bb96-c6b53be6a10c
(55.0GiB) write-thru activated]
| o- fileio
.................................................................................................
[Storage Objects: 0]
| o- pscsi
..................................................................................................
[Storage Objects: 0]
| o- ramdisk
................................................................................................
[Storage Objects: 0]
o- iscsi
............................................................................................................
[Targets: 1]
| o- iqn.2010-10.org.openstack:volume-07e39fbc-4767-4455-bb96-c6b53be6a10c
............................................. [TPGs: 1]
| o- tpg1
..........................................................................................
[no-gen-acls, auth per-acl]
| o- acls
..........................................................................................................
[ACLs: 1]
| | o- iqn.1994-05.com.redhat:cf7f1fafca4b
...................................................... [1-way auth, Mapped
LUNs: 1]
| | o- mapped_lun0 ................. [lun0
block/iqn.2010-10.org.openstack:volume-07e39fbc-4767-4455-bb96-c6b53be6a10c
(rw)]
| o- luns
..........................................................................................................
[LUNs: 1]
| | o- lun0
[block/iqn.2010-10.org.openstack:volume-07e39fbc-4767-4455-bb96-c6b53be6a10c
(/dev/cinder-volumes-local/volume-07e39fbc-4767-4455-bb96-c6b53be6a10c)]
| o- portals
....................................................................................................
[Portals: 1]
| o- 192.168.80.23:3260
...............................................................................................
[OK]
o- loopback
.........................................................................................................
[Targets: 0]
/>
[root@sbezverk-osp-3 ~(keystone_admin)]# lvs
LV VG Attr
LSize Pool Origin Data% Meta% Move Log Cpy%Sync Convert
swift-volume cinder-volumes-local -wi-ao----
200.00g
volume-07e39fbc-4767-4455-bb96-c6b53be6a10c cinder-volumes-local -wi-a-----
55.00g < ----- Local volume and a local target for OpenStack
instance
volume-c69da50c-c66a-4f94-9a40-b4f7d7f28eae cinder-volumes-local -wi-a-----
1.00g < ----- Local volume and a local target for OpenStack
instance
Here are tracebacks when OpenStack tries to attach to these two local targets:
[ 1019.953129] Unable to load target_core_user
[ 1033.758866] scsi host7: iSCSI Initiator over TCP/IP
[ 1033.776279] scsi 7:0:0:0: Direct-Access LIO-ORG IBLOCK 4.0
PQ: 0 ANSI: 5
[ 1033.776658] sd 7:0:0:0: alua: supports implicit and explicit TPGS
[ 1033.776721] TARGET_CORE[iSCSI]: Expected Transfer Length: 264 does not match
SCSI CDB Length: 8 for SAM Opcode: 0x12
[ 1033.776763] sd 7:0:0:0: alua: No target port descriptors found
[ 1033.776765] sd 7:0:0:0: alua: Attach failed (-22)
[ 1033.776782] sd 7:0:0:0: failed to add device handler: -22
[ 1033.776786] sd 7:0:0:0: [sdg] 115343360 512-byte logical blocks: (59.0
GB/55.0 GiB) < ----------------------------------- first 55G volume
[ 1033.776791] sd 7:0:0:0: [sdg] Write Protect is off
[ 1033.776792] sd 7:0:0:0: [sdg] Mode Sense: 00 00 00 00
[ 1033.776795] sd 7:0:0:0: [sdg] Asking for cache data failed
[ 1033.776820] sd 7:0:0:0: [sdg] Assuming drive cache: write through
[ 1033.776960] ------------[ cut here ]------------
[ 1033.776965] WARNING: CPU: 6 PID: 7 at lib/kobject.c:244
kobject_add_internal+0x10d/0x320()
[ 1033.776966] kobject_add_internal failed for block (error: -2 parent:
7:0:0:0)
[ 1033.776967] Modules linked in: target_core_pscsi target_core_file
target_core_iblock xt_REDIRECT nf_nat_redirect xt_nat xt_mark xt_CHECKSUM
nf_conntrack_ipv6 xt_mac xt_physdev xt_set xt_conntrack iptable_raw
ip_set_hash_net ip_set nfnetlink veth ebtable_filter ebtables ip6table_filter
ip6_tables iscsi_tcp libiscsi_tcp 8021q garp mrp rpcrdma ib_isert
iscsi_target_mod bonding ib_iser libiscsi scsi_transport_iscsi openvswitch
ib_srpt target_core_mod nf_defrag_ipv6 ib_srp scsi_transport_srp ib_ipoib
rdma_ucm ib_ucm ib_uverbs ib_umad rdma_cm ib_cm iw_cm xt_comment xt_multiport
ib_sa iptable_filter ib_mad iptable_nat nf_conntrack_ipv4 usnic_verbs
nf_defrag_ipv4 nf_nat_ipv4 nf_nat nf_conntrack ib_core ib_addr iptable_mangle
x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel kvm irqbypass
crct10dif_pclmul
[ 1033.777008] crc32_pclmul aesni_intel nfsd lrw gf128mul glue_helper
ablk_helper ses cryptd enclosure ipmi_devintf sg sb_edac iTCO_wdt shpchp
edac_core iTCO_vendor_support ipmi_si pcspkr lpc_ich ipmi_msghandler mfd_core
auth_rpcgss acpi_power_meter wmi nfs_acl lockd br_netfilter grace sunrpc bridge
stp llc dm_multipath ip_tables xfs libcrc32c sd_mod mgag200 drm_kms_helper
syscopyarea sysfillrect sysimgblt fb_sys_fops ttm drm ixgbe(O) fnic i40e
libfcoe igb crc32c_intel megaraid_sas enic libfc vxlan ip6_udp_tunnel
udp_tunnel ptp scsi_transport_fc i2c_algo_bit i2c_core pps_core dca dm_mirror
dm_region_hash dm_log dm_mod
[ 1033.777040] CPU: 6 PID: 7 Comm: kworker/u81:0 Tainted: G W O
4.4.0 #1
[ 1033.777041] Hardware name: Cisco Systems Inc UCSC-C240-M3S/UCSC-C240-M3S,
BIOS C240M3.2.0.8.0.071620152208 07/16/2015
[ 1033.777045] Workqueue: events_unbound async_run_entry_fn
[ 1033.777046] 0000000000000000 00000000f9d0f617 ffff882fa6bcbb60
ffffffff81329090
[ 1033.777048] ffff882fa6bcbba8 ffff882fa6bcbb98 ffffffff810862c6
ffff885d991d0360
[ 1033.777050] ffff885fa5f5c978 00000000fffffffe ffff885fa5f5c978
ffff882e7b520070
[ 1033.777052] Call Trace:
[ 1033.777057] [<ffffffff81329090>] dump_stack+0x44/0x64
[ 1033.777060] [<ffffffff810862c6>] warn_slowpath_common+0x86/0xc0
[ 1033.777061] [<ffffffff8108635c>] warn_slowpath_fmt+0x5c/0x80
[ 1033.777063] [<ffffffff8132bebd>] kobject_add_internal+0x10d/0x320
[ 1033.777067] [<ffffffff811a34d2>] ? kfree_const+0x22/0x30
[ 1033.777068] [<ffffffff8132c305>] kobject_add+0x75/0xd0
[ 1033.777073] [<ffffffff811e2a8e>] ? kmem_cache_alloc_trace+0x1be/0x1e0
[ 1033.777076] [<ffffffff81451f62>] ? get_device_parent+0x122/0x1d0
[ 1033.777078] [<ffffffff81451fa8>] get_device_parent+0x168/0x1d0
[ 1033.777079] [<ffffffff81452557>] device_add+0xf7/0x610
[ 1033.777081] [<ffffffff8130ecad>] add_disk+0x1cd/0x4a0
[ 1033.777085] [<ffffffff81460ec5>] ? update_autosuspend+0x55/0x60
[ 1033.777088] [<ffffffff81460f84>] ? __pm_runtime_use_autosuspend+0x54/0x70
[ 1033.777092] [<ffffffffa008ba35>] sd_probe_async+0x115/0x1d0 [sd_mod]
[ 1033.777093] [<ffffffff810a70fa>] async_run_entry_fn+0x4a/0x140
[ 1033.777096] [<ffffffff8109e09c>] process_one_work+0x14c/0x3c0
[ 1033.777097] [<ffffffff8109e8d4>] worker_thread+0x114/0x470
[ 1033.777098] [<ffffffff8109e7c0>] ? rescuer_thread+0x310/0x310
[ 1033.777101] [<ffffffff810a43d8>] kthread+0xd8/0xf0
[ 1033.777103] [<ffffffff810a4300>] ? kthread_park+0x60/0x60
[ 1033.777105] [<ffffffff8169490f>] ret_from_fork+0x3f/0x70
[ 1033.777107] [<ffffffff810a4300>] ? kthread_park+0x60/0x60
[ 1033.777108] ---[ end trace bcfb1475313b5f61 ]---
[ 1033.777855] sd 7:0:0:0: [sdg] Attached SCSI disk
[ 1033.911169] scsi 7:0:0:0: Direct-Access LIO-ORG IBLOCK 4.0
PQ: 0 ANSI: 5
[ 1033.911465] ------------[ cut here ]------------
[ 1033.911470] WARNING: CPU: 22 PID: 10565 at fs/sysfs/dir.c:31
sysfs_warn_dup+0x64/0x80()
[ 1033.911471] sysfs: cannot create duplicate filename
'/bus/scsi/devices/7:0:0:0'
[ 1033.911472] Modules linked in: target_core_pscsi target_core_file
target_core_iblock xt_REDIRECT nf_nat_redirect xt_nat xt_mark xt_CHECKSUM
nf_conntrack_ipv6 xt_mac xt_physdev xt_set xt_conntrack iptable_raw
ip_set_hash_net ip_set nfnetlink veth ebtable_filter ebtables ip6table_filter
ip6_tables iscsi_tcp libiscsi_tcp 8021q garp mrp rpcrdma ib_isert
iscsi_target_mod bonding ib_iser libiscsi scsi_transport_iscsi openvswitch
ib_srpt target_core_mod nf_defrag_ipv6 ib_srp scsi_transport_srp ib_ipoib
rdma_ucm ib_ucm ib_uverbs ib_umad rdma_cm ib_cm iw_cm xt_comment xt_multiport
ib_sa iptable_filter ib_mad iptable_nat nf_conntrack_ipv4 usnic_verbs
nf_defrag_ipv4 nf_nat_ipv4 nf_nat nf_conntrack ib_core ib_addr iptable_mangle
x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel kvm irqbypass
crct10dif_pclmul
[ 1033.911502] crc32_pclmul aesni_intel nfsd lrw gf128mul glue_helper
ablk_helper ses cryptd enclosure ipmi_devintf sg sb_edac iTCO_wdt shpchp
edac_core iTCO_vendor_support ipmi_si pcspkr lpc_ich ipmi_msghandler mfd_core
auth_rpcgss acpi_power_meter wmi nfs_acl lockd br_netfilter grace sunrpc bridge
stp llc dm_multipath ip_tables xfs libcrc32c sd_mod mgag200 drm_kms_helper
syscopyarea sysfillrect sysimgblt fb_sys_fops ttm drm ixgbe(O) fnic i40e
libfcoe igb crc32c_intel megaraid_sas enic libfc vxlan ip6_udp_tunnel
udp_tunnel ptp scsi_transport_fc i2c_algo_bit i2c_core pps_core dca dm_mirror
dm_region_hash dm_log dm_mod
[ 1033.911533] CPU: 22 PID: 10565 Comm: iscsiadm Tainted: G W O
4.4.0 #1
[ 1033.911534] Hardware name: Cisco Systems Inc UCSC-C240-M3S/UCSC-C240-M3S,
BIOS C240M3.2.0.8.0.071620152208 07/16/2015
[ 1033.911535] 0000000000000000 000000004e211399 ffff885d9a9d3948
ffffffff81329090
[ 1033.911537] ffff885d9a9d3990 ffff885d9a9d3980 ffffffff810862c6
ffff882fa033c000
[ 1033.911538] ffff885f9f5bf490 ffff885fa5329e10 0000000000000001
ffffffffffffffef
[ 1033.911540] Call Trace:
[ 1033.911545] [<ffffffff81329090>] dump_stack+0x44/0x64
[ 1033.911548] [<ffffffff810862c6>] warn_slowpath_common+0x86/0xc0
[ 1033.911549] [<ffffffff8108635c>] warn_slowpath_fmt+0x5c/0x80
[ 1033.911552] [<ffffffff8127e9a8>] ? kernfs_path+0x48/0x60
[ 1033.911553] [<ffffffff81282014>] sysfs_warn_dup+0x64/0x80
[ 1033.911555] [<ffffffff812823aa>] sysfs_do_create_link_sd.isra.2+0xaa/0xb0
[ 1033.911556] [<ffffffff812823d5>] sysfs_create_link+0x25/0x40
[ 1033.911560] [<ffffffff81454a6b>] bus_add_device+0x10b/0x1f0
[ 1033.911561] [<ffffffff81452815>] device_add+0x3b5/0x610
[ 1033.911564] [<ffffffff81487df5>] scsi_sysfs_add_sdev+0xa5/0x290
[ 1033.911566] [<ffffffff81485355>] scsi_probe_and_add_lun+0xb65/0xd80
[ 1033.911570] [<ffffffff814608ac>] ? __pm_runtime_resume+0x5c/0x70
[ 1033.911572] [<ffffffff81485d67>] __scsi_scan_target+0xf7/0x260
[ 1033.911574] [<ffffffff814608ac>] ? __pm_runtime_resume+0x5c/0x70
[ 1033.911577] [<ffffffff81485fa7>] scsi_scan_target+0xd7/0xf0
[ 1033.911587] [<ffffffffa07c29f5>]
iscsi_user_scan_session.part.14+0x105/0x140 [scsi_transport_iscsi]
[ 1033.911592] [<ffffffffa07c2a30>] ?
iscsi_user_scan_session.part.14+0x140/0x140 [scsi_transport_iscsi]
[ 1033.911596] [<ffffffffa07c2a4e>] iscsi_user_scan_session+0x1e/0x30
[scsi_transport_iscsi]
[ 1033.911599] [<ffffffff81450b80>] device_for_each_child+0x50/0x90
[ 1033.911604] [<ffffffffa07c083d>] iscsi_user_scan+0x3d/0x60
[scsi_transport_iscsi]
[ 1033.911607] [<ffffffff81487bb6>] store_scan+0xa6/0x100
[ 1033.911612] [<ffffffff811e3158>] ? __kmalloc+0x1b8/0x250
[ 1033.911616] [<ffffffff81450318>] dev_attr_store+0x18/0x30
[ 1033.911618] [<ffffffff8128170a>] sysfs_kf_write+0x3a/0x50
[ 1033.911620] [<ffffffff81280d90>] kernfs_fop_write+0x120/0x170
[ 1033.911623] [<ffffffff81203f17>] __vfs_write+0x37/0x100
[ 1033.911626] [<ffffffff812b6c03>] ? selinux_file_permission+0xc3/0x110
[ 1033.911630] [<ffffffff812ae75d>] ? security_file_permission+0x3d/0xc0
[ 1033.911634] [<ffffffff810cd95f>] ? percpu_down_read+0x1f/0x50
[ 1033.911636] [<ffffffff812045f2>] vfs_write+0xa2/0x1a0
[ 1033.911640] [<ffffffff81003176>] ? do_audit_syscall_entry+0x66/0x70
[ 1033.911641] [<ffffffff812053b5>] SyS_write+0x55/0xc0
[ 1033.911644] [<ffffffff816945ae>] entry_SYSCALL_64_fastpath+0x12/0x71
[ 1033.911645] ---[ end trace bcfb1475313b5f62 ]---
[ 1033.911676] scsi 7:0:0:0: failed to add device: -17
[ 1033.982858] scsi 7:0:0:0: Direct-Access LIO-ORG IBLOCK 4.0
PQ: 0 ANSI: 5
[ 1033.983185] ------------[ cut here ]------------
[ 1033.983191] WARNING: CPU: 1 PID: 10574 at fs/sysfs/dir.c:31
sysfs_warn_dup+0x64/0x80()
[ 1033.983192] sysfs: cannot create duplicate filename
'/bus/scsi/devices/7:0:0:0'
[ 1033.983193] Modules linked in: target_core_pscsi target_core_file
target_core_iblock xt_REDIRECT nf_nat_redirect xt_nat xt_mark xt_CHECKSUM
nf_conntrack_ipv6 xt_mac xt_physdev xt_set xt_conntrack iptable_raw
ip_set_hash_net ip_set nfnetlink veth ebtable_filter ebtables ip6table_filter
ip6_tables iscsi_tcp libiscsi_tcp 8021q garp mrp rpcrdma ib_isert
iscsi_target_mod bonding ib_iser libiscsi scsi_transport_iscsi openvswitch
ib_srpt target_core_mod nf_defrag_ipv6 ib_srp scsi_transport_srp ib_ipoib
rdma_ucm ib_ucm ib_uverbs ib_umad rdma_cm ib_cm iw_cm xt_comment xt_multiport
ib_sa iptable_filter ib_mad iptable_nat nf_conntrack_ipv4 usnic_verbs
nf_defrag_ipv4 nf_nat_ipv4 nf_nat nf_conntrack ib_core ib_addr iptable_mangle
x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel kvm irqbypass
crct10dif_pclmul
[ 1033.983224] crc32_pclmul aesni_intel nfsd lrw gf128mul glue_helper
ablk_helper ses cryptd enclosure ipmi_devintf sg sb_edac iTCO_wdt shpchp
edac_core iTCO_vendor_support ipmi_si pcspkr lpc_ich ipmi_msghandler mfd_core
auth_rpcgss acpi_power_meter wmi nfs_acl lockd br_netfilter grace sunrpc bridge
stp llc dm_multipath ip_tables xfs libcrc32c sd_mod mgag200 drm_kms_helper
syscopyarea sysfillrect sysimgblt fb_sys_fops ttm drm ixgbe(O) fnic i40e
libfcoe igb crc32c_intel megaraid_sas enic libfc vxlan ip6_udp_tunnel
udp_tunnel ptp scsi_transport_fc i2c_algo_bit i2c_core pps_core dca dm_mirror
dm_region_hash dm_log dm_mod
[ 1033.983255] CPU: 1 PID: 10574 Comm: iscsiadm Tainted: G W O 4.4.0
#1
[ 1033.983256] Hardware name: Cisco Systems Inc UCSC-C240-M3S/UCSC-C240-M3S,
BIOS C240M3.2.0.8.0.071620152208 07/16/2015
[ 1033.983258] 0000000000000000 00000000b4fefb6b ffff882e7b617948
ffffffff81329090
[ 1033.983260] ffff882e7b617990 ffff882e7b617980 ffffffff810862c6
ffff882e793b5000
[ 1033.983261] ffff882f9f78ded0 ffff885fa5329e10 0000000000000001
ffffffffffffffef
[ 1033.983263] Call Trace:
[ 1033.983268] [<ffffffff81329090>] dump_stack+0x44/0x64
[ 1033.983270] [<ffffffff810862c6>] warn_slowpath_common+0x86/0xc0
[ 1033.983271] [<ffffffff8108635c>] warn_slowpath_fmt+0x5c/0x80
[ 1033.983274] [<ffffffff8127e9a8>] ? kernfs_path+0x48/0x60
[ 1033.983276] [<ffffffff81282014>] sysfs_warn_dup+0x64/0x80
[ 1033.983278] [<ffffffff812823aa>] sysfs_do_create_link_sd.isra.2+0xaa/0xb0
[ 1033.983279] [<ffffffff812823d5>] sysfs_create_link+0x25/0x40
[ 1033.983282] [<ffffffff81454a6b>] bus_add_device+0x10b/0x1f0
[ 1033.983284] [<ffffffff81452815>] device_add+0x3b5/0x610
[ 1033.983287] [<ffffffff81487df5>] scsi_sysfs_add_sdev+0xa5/0x290
[ 1033.983289] [<ffffffff81485355>] scsi_probe_and_add_lun+0xb65/0xd80
[ 1033.983293] [<ffffffff814608ac>] ? __pm_runtime_resume+0x5c/0x70
[ 1033.983295] [<ffffffff81485d67>] __scsi_scan_target+0xf7/0x260
[ 1033.983297] [<ffffffff814608ac>] ? __pm_runtime_resume+0x5c/0x70
[ 1033.983298] [<ffffffff81485fa7>] scsi_scan_target+0xd7/0xf0
[ 1033.983306] [<ffffffffa07c29f5>]
iscsi_user_scan_session.part.14+0x105/0x140 [scsi_transport_iscsi]
[ 1033.983309] [<ffffffffa07c2a30>] ?
iscsi_user_scan_session.part.14+0x140/0x140 [scsi_transport_iscsi]
[ 1033.983313] [<ffffffffa07c2a4e>] iscsi_user_scan_session+0x1e/0x30
[scsi_transport_iscsi]
[ 1033.983314] [<ffffffff81450b80>] device_for_each_child+0x50/0x90
[ 1033.983318] [<ffffffffa07c083d>] iscsi_user_scan+0x3d/0x60
[scsi_transport_iscsi]
[ 1033.983320] [<ffffffff81487bb6>] store_scan+0xa6/0x100
[ 1033.983324] [<ffffffff811e3158>] ? __kmalloc+0x1b8/0x250
[ 1033.983327] [<ffffffff81450318>] dev_attr_store+0x18/0x30
[ 1033.983329] [<ffffffff8128170a>] sysfs_kf_write+0x3a/0x50
[ 1033.983330] [<ffffffff81280d90>] kernfs_fop_write+0x120/0x170
[ 1033.983332] [<ffffffff81203f17>] __vfs_write+0x37/0x100
[ 1033.983335] [<ffffffff812b6c03>] ? selinux_file_permission+0xc3/0x110
[ 1033.983338] [<ffffffff812ae75d>] ? security_file_permission+0x3d/0xc0
[ 1033.983341] [<ffffffff810cd95f>] ? percpu_down_read+0x1f/0x50
[ 1033.983342] [<ffffffff812045f2>] vfs_write+0xa2/0x1a0
[ 1033.983345] [<ffffffff81003176>] ? do_audit_syscall_entry+0x66/0x70
[ 1033.983346] [<ffffffff812053b5>] SyS_write+0x55/0xc0
[ 1033.983349] [<ffffffff816945ae>] entry_SYSCALL_64_fastpath+0x12/0x71
[ 1033.983350] ---[ end trace bcfb1475313b5f63 ]---
[ 1033.983379] scsi 7:0:0:0: failed to add device: -17
[ 1035.052654] scsi 7:0:0:0: Direct-Access LIO-ORG IBLOCK 4.0
PQ: 0 ANSI: 5
[ 1035.052938] ------------[ cut here ]------------
[ 1035.052943] WARNING: CPU: 1 PID: 10583 at fs/sysfs/dir.c:31
sysfs_warn_dup+0x64/0x80()
[ 1035.052944] sysfs: cannot create duplicate filename
'/bus/scsi/devices/7:0:0:0'
[ 1035.052945] Modules linked in: target_core_pscsi target_core_file
target_core_iblock xt_REDIRECT nf_nat_redirect xt_nat xt_mark xt_CHECKSUM
nf_conntrack_ipv6 xt_mac xt_physdev xt_set xt_conntrack iptable_raw
ip_set_hash_net ip_set nfnetlink veth ebtable_filter ebtables ip6table_filter
ip6_tables iscsi_tcp libiscsi_tcp 8021q garp mrp rpcrdma ib_isert
iscsi_target_mod bonding ib_iser libiscsi scsi_transport_iscsi openvswitch
ib_srpt target_core_mod nf_defrag_ipv6 ib_srp scsi_transport_srp ib_ipoib
rdma_ucm ib_ucm ib_uverbs ib_umad rdma_cm ib_cm iw_cm xt_comment xt_multiport
ib_sa iptable_filter ib_mad iptable_nat nf_conntrack_ipv4 usnic_verbs
nf_defrag_ipv4 nf_nat_ipv4 nf_nat nf_conntrack ib_core ib_addr iptable_mangle
x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel kvm irqbypass
crct10dif_pclmul
[ 1035.052976] crc32_pclmul aesni_intel nfsd lrw gf128mul glue_helper
ablk_helper ses cryptd enclosure ipmi_devintf sg sb_edac iTCO_wdt shpchp
edac_core iTCO_vendor_support ipmi_si pcspkr lpc_ich ipmi_msghandler mfd_core
auth_rpcgss acpi_power_meter wmi nfs_acl lockd br_netfilter grace sunrpc bridge
stp llc dm_multipath ip_tables xfs libcrc32c sd_mod mgag200 drm_kms_helper
syscopyarea sysfillrect sysimgblt fb_sys_fops ttm drm ixgbe(O) fnic i40e
libfcoe igb crc32c_intel megaraid_sas enic libfc vxlan ip6_udp_tunnel
udp_tunnel ptp scsi_transport_fc i2c_algo_bit i2c_core pps_core dca dm_mirror
dm_region_hash dm_log dm_mod
[ 1035.053043] CPU: 1 PID: 10583 Comm: iscsiadm Tainted: G W O 4.4.0
#1
[ 1035.053044] Hardware name: Cisco Systems Inc UCSC-C240-M3S/UCSC-C240-M3S,
BIOS C240M3.2.0.8.0.071620152208 07/16/2015
[ 1035.053045] 0000000000000000 00000000acef2a8b ffff882e7b603948
ffffffff81329090
[ 1035.053047] ffff882e7b603990 ffff882e7b603980 ffffffff810862c6
ffff882e793b5000
[ 1035.053049] ffff882f9feaa880 ffff885fa5329e10 0000000000000001
ffffffffffffffef
[ 1035.053050] Call Trace:
[ 1035.053056] [<ffffffff81329090>] dump_stack+0x44/0x64
[ 1035.053058] [<ffffffff810862c6>] warn_slowpath_common+0x86/0xc0
[ 1035.053060] [<ffffffff8108635c>] warn_slowpath_fmt+0x5c/0x80
[ 1035.053063] [<ffffffff8127e9a8>] ? kernfs_path+0x48/0x60
[ 1035.053064] [<ffffffff81282014>] sysfs_warn_dup+0x64/0x80
[ 1035.053066] [<ffffffff812823aa>] sysfs_do_create_link_sd.isra.2+0xaa/0xb0
[ 1035.053068] [<ffffffff812823d5>] sysfs_create_link+0x25/0x40
[ 1035.053071] [<ffffffff81454a6b>] bus_add_device+0x10b/0x1f0
[ 1035.053073] [<ffffffff81452815>] device_add+0x3b5/0x610
[ 1035.053076] [<ffffffff81487df5>] scsi_sysfs_add_sdev+0xa5/0x290
[ 1035.053078] [<ffffffff81485355>] scsi_probe_and_add_lun+0xb65/0xd80
[ 1035.053082] [<ffffffff814608ac>] ? __pm_runtime_resume+0x5c/0x70
[ 1035.053084] [<ffffffff81485d67>] __scsi_scan_target+0xf7/0x260
[ 1035.053085] [<ffffffff814608ac>] ? __pm_runtime_resume+0x5c/0x70
[ 1035.053087] [<ffffffff81485fa7>] scsi_scan_target+0xd7/0xf0
[ 1035.053094] [<ffffffffa07c29f5>]
iscsi_user_scan_session.part.14+0x105/0x140 [scsi_transport_iscsi]
[ 1035.053097] [<ffffffffa07c2a30>] ?
iscsi_user_scan_session.part.14+0x140/0x140 [scsi_transport_iscsi]
[ 1035.053101] [<ffffffffa07c2a4e>] iscsi_user_scan_session+0x1e/0x30
[scsi_transport_iscsi]
[ 1035.053102] [<ffffffff81450b80>] device_for_each_child+0x50/0x90
[ 1035.053106] [<ffffffffa07c083d>] iscsi_user_scan+0x3d/0x60
[scsi_transport_iscsi]
[ 1035.053108] [<ffffffff81487bb6>] store_scan+0xa6/0x100
[ 1035.053111] [<ffffffff811e3158>] ? __kmalloc+0x1b8/0x250
[ 1035.053115] [<ffffffff81450318>] dev_attr_store+0x18/0x30
[ 1035.053116] [<ffffffff8128170a>] sysfs_kf_write+0x3a/0x50
[ 1035.053118] [<ffffffff81280d90>] kernfs_fop_write+0x120/0x170
[ 1035.053120] [<ffffffff81203f17>] __vfs_write+0x37/0x100
[ 1035.053122] [<ffffffff812b6c03>] ? selinux_file_permission+0xc3/0x110
[ 1035.053126] [<ffffffff812ae75d>] ? security_file_permission+0x3d/0xc0
[ 1035.053129] [<ffffffff810cd95f>] ? percpu_down_read+0x1f/0x50
[ 1035.053130] [<ffffffff812045f2>] vfs_write+0xa2/0x1a0
[ 1035.053132] [<ffffffff81003176>] ? do_audit_syscall_entry+0x66/0x70
[ 1035.053134] [<ffffffff812053b5>] SyS_write+0x55/0xc0
[ 1035.053137] [<ffffffff816945ae>] entry_SYSCALL_64_fastpath+0x12/0x71
[ 1035.053138] ---[ end trace bcfb1475313b5f64 ]---
[ 1035.053185] scsi 7:0:0:0: failed to add device: -17
[ 1039.129111] scsi 7:0:0:0: Direct-Access LIO-ORG IBLOCK 4.0
PQ: 0 ANSI: 5
[ 1039.129445] ------------[ cut here ]------------
[ 1039.129450] WARNING: CPU: 1 PID: 10604 at fs/sysfs/dir.c:31
sysfs_warn_dup+0x64/0x80()
[ 1039.129451] sysfs: cannot create duplicate filename
'/bus/scsi/devices/7:0:0:0'
[ 1039.129452] Modules linked in: target_core_pscsi target_core_file
target_core_iblock xt_REDIRECT nf_nat_redirect xt_nat xt_mark xt_CHECKSUM
nf_conntrack_ipv6 xt_mac xt_physdev xt_set xt_conntrack iptable_raw
ip_set_hash_net ip_set nfnetlink veth ebtable_filter ebtables ip6table_filter
ip6_tables iscsi_tcp libiscsi_tcp 8021q garp mrp rpcrdma ib_isert
iscsi_target_mod bonding ib_iser libiscsi scsi_transport_iscsi openvswitch
ib_srpt target_core_mod nf_defrag_ipv6 ib_srp scsi_transport_srp ib_ipoib
rdma_ucm ib_ucm ib_uverbs ib_umad rdma_cm ib_cm iw_cm xt_comment xt_multiport
ib_sa iptable_filter ib_mad iptable_nat nf_conntrack_ipv4 usnic_verbs
nf_defrag_ipv4 nf_nat_ipv4 nf_nat nf_conntrack ib_core ib_addr iptable_mangle
x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel kvm irqbypass
crct10dif_pclmul
[ 1039.129483] crc32_pclmul aesni_intel nfsd lrw gf128mul glue_helper
ablk_helper ses cryptd enclosure ipmi_devintf sg sb_edac iTCO_wdt shpchp
edac_core iTCO_vendor_support ipmi_si pcspkr lpc_ich ipmi_msghandler mfd_core
auth_rpcgss acpi_power_meter wmi nfs_acl lockd br_netfilter grace sunrpc bridge
stp llc dm_multipath ip_tables xfs libcrc32c sd_mod mgag200 drm_kms_helper
syscopyarea sysfillrect sysimgblt fb_sys_fops ttm drm ixgbe(O) fnic i40e
libfcoe igb crc32c_intel megaraid_sas enic libfc vxlan ip6_udp_tunnel
udp_tunnel ptp scsi_transport_fc i2c_algo_bit i2c_core pps_core dca dm_mirror
dm_region_hash dm_log dm_mod
[ 1039.129513] CPU: 1 PID: 10604 Comm: iscsiadm Tainted: G W O 4.4.0
#1
[ 1039.129514] Hardware name: Cisco Systems Inc UCSC-C240-M3S/UCSC-C240-M3S,
BIOS C240M3.2.0.8.0.071620152208 07/16/2015
[ 1039.129515] 0000000000000000 00000000c52587c8 ffff885fa5c9b948
ffffffff81329090
[ 1039.129517] ffff885fa5c9b990 ffff885fa5c9b980 ffffffff810862c6
ffff882e793b5000
[ 1039.129519] ffff882f9fb97fa8 ffff885fa5329e10 0000000000000001
ffffffffffffffef
[ 1039.129530] Call Trace:
[ 1039.129535] [<ffffffff81329090>] dump_stack+0x44/0x64
[ 1039.129538] [<ffffffff810862c6>] warn_slowpath_common+0x86/0xc0
[ 1039.129539] [<ffffffff8108635c>] warn_slowpath_fmt+0x5c/0x80
[ 1039.129542] [<ffffffff8127e9a8>] ? kernfs_path+0x48/0x60
[ 1039.129544] [<ffffffff81282014>] sysfs_warn_dup+0x64/0x80
[ 1039.129545] [<ffffffff812823aa>] sysfs_do_create_link_sd.isra.2+0xaa/0xb0
[ 1039.129547] [<ffffffff812823d5>] sysfs_create_link+0x25/0x40
[ 1039.129550] [<ffffffff81454a6b>] bus_add_device+0x10b/0x1f0
[ 1039.129552] [<ffffffff81452815>] device_add+0x3b5/0x610
[ 1039.129555] [<ffffffff81487df5>] scsi_sysfs_add_sdev+0xa5/0x290
[ 1039.129557] [<ffffffff81485355>] scsi_probe_and_add_lun+0xb65/0xd80
[ 1039.129561] [<ffffffff814608ac>] ? __pm_runtime_resume+0x5c/0x70
[ 1039.129562] [<ffffffff81485d67>] __scsi_scan_target+0xf7/0x260
[ 1039.129564] [<ffffffff814608ac>] ? __pm_runtime_resume+0x5c/0x70
[ 1039.129566] [<ffffffff81485fa7>] scsi_scan_target+0xd7/0xf0
[ 1039.129573] [<ffffffffa07c29f5>]
iscsi_user_scan_session.part.14+0x105/0x140 [scsi_transport_iscsi]
[ 1039.129576] [<ffffffffa07c2a30>] ?
iscsi_user_scan_session.part.14+0x140/0x140 [scsi_transport_iscsi]
[ 1039.129580] [<ffffffffa07c2a4e>] iscsi_user_scan_session+0x1e/0x30
[scsi_transport_iscsi]
[ 1039.129581] [<ffffffff81450b80>] device_for_each_child+0x50/0x90
[ 1039.129585] [<ffffffffa07c083d>] iscsi_user_scan+0x3d/0x60
[scsi_transport_iscsi]
[ 1039.129587] [<ffffffff81487bb6>] store_scan+0xa6/0x100
[ 1039.129591] [<ffffffff811e3158>] ? __kmalloc+0x1b8/0x250
[ 1039.129594] [<ffffffff81450318>] dev_attr_store+0x18/0x30
[ 1039.129596] [<ffffffff8128170a>] sysfs_kf_write+0x3a/0x50
[ 1039.129597] [<ffffffff81280d90>] kernfs_fop_write+0x120/0x170
[ 1039.129599] [<ffffffff81203f17>] __vfs_write+0x37/0x100
[ 1039.129602] [<ffffffff812b6c03>] ? selinux_file_permission+0xc3/0x110
[ 1039.129605] [<ffffffff812ae75d>] ? security_file_permission+0x3d/0xc0
[ 1039.129607] [<ffffffff810cd95f>] ? percpu_down_read+0x1f/0x50
[ 1039.129609] [<ffffffff812045f2>] vfs_write+0xa2/0x1a0
[ 1039.129611] [<ffffffff81003176>] ? do_audit_syscall_entry+0x66/0x70
[ 1039.129612] [<ffffffff812053b5>] SyS_write+0x55/0xc0
[ 1039.129615] [<ffffffff816945ae>] entry_SYSCALL_64_fastpath+0x12/0x71
[ 1039.129616] ---[ end trace bcfb1475313b5f65 ]---
[ 1039.129638] scsi 7:0:0:0: failed to add device: -17
[ 1048.204151] scsi 7:0:0:0: Direct-Access LIO-ORG IBLOCK 4.0
PQ: 0 ANSI: 5
[ 1048.204524] ------------[ cut here ]------------
[ 1048.204530] WARNING: CPU: 2 PID: 10624 at fs/sysfs/dir.c:31
sysfs_warn_dup+0x64/0x80()
[ 1048.204531] sysfs: cannot create duplicate filename
'/bus/scsi/devices/7:0:0:0'
[ 1048.204532] Modules linked in: target_core_pscsi target_core_file
target_core_iblock xt_REDIRECT nf_nat_redirect xt_nat xt_mark xt_CHECKSUM
nf_conntrack_ipv6 xt_mac xt_physdev xt_set xt_conntrack iptable_raw
ip_set_hash_net ip_set nfnetlink veth ebtable_filter ebtables ip6table_filter
ip6_tables iscsi_tcp libiscsi_tcp 8021q garp mrp rpcrdma ib_isert
iscsi_target_mod bonding ib_iser libiscsi scsi_transport_iscsi openvswitch
ib_srpt target_core_mod nf_defrag_ipv6 ib_srp scsi_transport_srp ib_ipoib
rdma_ucm ib_ucm ib_uverbs ib_umad rdma_cm ib_cm iw_cm xt_comment xt_multiport
ib_sa iptable_filter ib_mad iptable_nat nf_conntrack_ipv4 usnic_verbs
nf_defrag_ipv4 nf_nat_ipv4 nf_nat nf_conntrack ib_core ib_addr iptable_mangle
x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel kvm irqbypass
crct10dif_pclmul
[ 1048.204564] crc32_pclmul aesni_intel nfsd lrw gf128mul glue_helper
ablk_helper ses cryptd enclosure ipmi_devintf sg sb_edac iTCO_wdt shpchp
edac_core iTCO_vendor_support ipmi_si pcspkr lpc_ich ipmi_msghandler mfd_core
auth_rpcgss acpi_power_meter wmi nfs_acl lockd br_netfilter grace sunrpc bridge
stp llc dm_multipath ip_tables xfs libcrc32c sd_mod mgag200 drm_kms_helper
syscopyarea sysfillrect sysimgblt fb_sys_fops ttm drm ixgbe(O) fnic i40e
libfcoe igb crc32c_intel megaraid_sas enic libfc vxlan ip6_udp_tunnel
udp_tunnel ptp scsi_transport_fc i2c_algo_bit i2c_core pps_core dca dm_mirror
dm_region_hash dm_log dm_mod
[ 1048.204597] CPU: 2 PID: 10624 Comm: iscsiadm Tainted: G W O 4.4.0
#1
[ 1048.204599] Hardware name: Cisco Systems Inc UCSC-C240-M3S/UCSC-C240-M3S,
BIOS C240M3.2.0.8.0.071620152208 07/16/2015
[ 1048.204600] 0000000000000000 0000000088d9f919 ffff882e7aa0b948
ffffffff81329090
[ 1048.204602] ffff882e7aa0b990 ffff882e7aa0b980 ffffffff810862c6
ffff882e7b4f1000
[ 1048.204604] ffff885f9f16f2c8 ffff885fa5329e10 0000000000000001
ffffffffffffffef
[ 1048.204605] Call Trace:
[ 1048.204612] [<ffffffff81329090>] dump_stack+0x44/0x64
[ 1048.204614] [<ffffffff810862c6>] warn_slowpath_common+0x86/0xc0
[ 1048.204616] [<ffffffff8108635c>] warn_slowpath_fmt+0x5c/0x80
[ 1048.204619] [<ffffffff8127e9a8>] ? kernfs_path+0x48/0x60
[ 1048.204620] [<ffffffff81282014>] sysfs_warn_dup+0x64/0x80
[ 1048.204622] [<ffffffff812823aa>] sysfs_do_create_link_sd.isra.2+0xaa/0xb0
[ 1048.204624] [<ffffffff812823d5>] sysfs_create_link+0x25/0x40
[ 1048.204627] [<ffffffff81454a6b>] bus_add_device+0x10b/0x1f0
[ 1048.204628] [<ffffffff81452815>] device_add+0x3b5/0x610
[ 1048.204632] [<ffffffff81487df5>] scsi_sysfs_add_sdev+0xa5/0x290
[ 1048.204634] [<ffffffff81485355>] scsi_probe_and_add_lun+0xb65/0xd80
[ 1048.204638] [<ffffffff814608ac>] ? __pm_runtime_resume+0x5c/0x70
[ 1048.204640] [<ffffffff81485d67>] __scsi_scan_target+0xf7/0x260
[ 1048.204641] [<ffffffff814608ac>] ? __pm_runtime_resume+0x5c/0x70
[ 1048.204643] [<ffffffff81485fa7>] scsi_scan_target+0xd7/0xf0
[ 1048.204651] [<ffffffffa07c29f5>]
iscsi_user_scan_session.part.14+0x105/0x140 [scsi_transport_iscsi]
[ 1048.204654] [<ffffffffa07c2a30>] ?
iscsi_user_scan_session.part.14+0x140/0x140 [scsi_transport_iscsi]
[ 1048.204658] [<ffffffffa07c2a4e>] iscsi_user_scan_session+0x1e/0x30
[scsi_transport_iscsi]
[ 1048.204659] [<ffffffff81450b80>] device_for_each_child+0x50/0x90
[ 1048.204663] [<ffffffffa07c083d>] iscsi_user_scan+0x3d/0x60
[scsi_transport_iscsi]
[ 1048.204665] [<ffffffff81487bb6>] store_scan+0xa6/0x100
[ 1048.204669] [<ffffffff811e3158>] ? __kmalloc+0x1b8/0x250
[ 1048.204673] [<ffffffff81450318>] dev_attr_store+0x18/0x30
[ 1048.204674] [<ffffffff8128170a>] sysfs_kf_write+0x3a/0x50
[ 1048.204676] [<ffffffff81280d90>] kernfs_fop_write+0x120/0x170
[ 1048.204678] [<ffffffff81203f17>] __vfs_write+0x37/0x100
[ 1048.204680] [<ffffffff812b6c03>] ? selinux_file_permission+0xc3/0x110
[ 1048.204684] [<ffffffff812ae75d>] ? security_file_permission+0x3d/0xc0
[ 1048.204687] [<ffffffff810cd95f>] ? percpu_down_read+0x1f/0x50
[ 1048.204688] [<ffffffff812045f2>] vfs_write+0xa2/0x1a0
[ 1048.204690] [<ffffffff81003176>] ? do_audit_syscall_entry+0x66/0x70
[ 1048.204692] [<ffffffff812053b5>] SyS_write+0x55/0xc0
[ 1048.204695] [<ffffffff816945ae>] entry_SYSCALL_64_fastpath+0x12/0x71
[ 1048.204697] ---[ end trace bcfb1475313b5f66 ]---
[ 1048.204719] scsi 7:0:0:0: failed to add device: -17
[ 1064.276300] scsi 7:0:0:0: Direct-Access LIO-ORG IBLOCK 4.0
PQ: 0 ANSI: 5
[ 1064.276598] ------------[ cut here ]------------
[ 1064.276603] WARNING: CPU: 1 PID: 10652 at fs/sysfs/dir.c:31
sysfs_warn_dup+0x64/0x80()
[ 1064.276604] sysfs: cannot create duplicate filename
'/bus/scsi/devices/7:0:0:0'
[ 1064.276604] Modules linked in: target_core_pscsi target_core_file
target_core_iblock xt_REDIRECT nf_nat_redirect xt_nat xt_mark xt_CHECKSUM
nf_conntrack_ipv6 xt_mac xt_physdev xt_set xt_conntrack iptable_raw
ip_set_hash_net ip_set nfnetlink veth ebtable_filter ebtables ip6table_filter
ip6_tables iscsi_tcp libiscsi_tcp 8021q garp mrp rpcrdma ib_isert
iscsi_target_mod bonding ib_iser libiscsi scsi_transport_iscsi openvswitch
ib_srpt target_core_mod nf_defrag_ipv6 ib_srp scsi_transport_srp ib_ipoib
rdma_ucm ib_ucm ib_uverbs ib_umad rdma_cm ib_cm iw_cm xt_comment xt_multiport
ib_sa iptable_filter ib_mad iptable_nat nf_conntrack_ipv4 usnic_verbs
nf_defrag_ipv4 nf_nat_ipv4 nf_nat nf_conntrack ib_core ib_addr iptable_mangle
x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel kvm irqbypass
crct10dif_pclmul
[ 1064.276649] crc32_pclmul aesni_intel nfsd lrw gf128mul glue_helper
ablk_helper ses cryptd enclosure ipmi_devintf sg sb_edac iTCO_wdt shpchp
edac_core iTCO_vendor_support ipmi_si pcspkr lpc_ich ipmi_msghandler mfd_core
auth_rpcgss acpi_power_meter wmi nfs_acl lockd br_netfilter grace sunrpc bridge
stp llc dm_multipath ip_tables xfs libcrc32c sd_mod mgag200 drm_kms_helper
syscopyarea sysfillrect sysimgblt fb_sys_fops ttm drm ixgbe(O) fnic i40e
libfcoe igb crc32c_intel megaraid_sas enic libfc vxlan ip6_udp_tunnel
udp_tunnel ptp scsi_transport_fc i2c_algo_bit i2c_core pps_core dca dm_mirror
dm_region_hash dm_log dm_mod
[ 1064.276682] CPU: 1 PID: 10652 Comm: iscsiadm Tainted: G W O 4.4.0
#1
[ 1064.276683] Hardware name: Cisco Systems Inc UCSC-C240-M3S/UCSC-C240-M3S,
BIOS C240M3.2.0.8.0.071620152208 07/16/2015
[ 1064.276684] 0000000000000000 0000000080e19618 ffff882e7aa0b948
ffffffff81329090
[ 1064.276686] ffff882e7aa0b990 ffff882e7aa0b980 ffffffff810862c6
ffff882f9fed7000
[ 1064.276688] ffff885f9f16f2d0 ffff885fa5329e10 0000000000000001
ffffffffffffffef
[ 1064.276689] Call Trace:
[ 1064.276695] [<ffffffff81329090>] dump_stack+0x44/0x64
[ 1064.276698] [<ffffffff810862c6>] warn_slowpath_common+0x86/0xc0
[ 1064.276700] [<ffffffff8108635c>] warn_slowpath_fmt+0x5c/0x80
[ 1064.276703] [<ffffffff8127e9a8>] ? kernfs_path+0x48/0x60
[ 1064.276704] [<ffffffff81282014>] sysfs_warn_dup+0x64/0x80
[ 1064.276706] [<ffffffff812823aa>] sysfs_do_create_link_sd.isra.2+0xaa/0xb0
[ 1064.276708] [<ffffffff812823d5>] sysfs_create_link+0x25/0x40
[ 1064.276711] [<ffffffff81454a6b>] bus_add_device+0x10b/0x1f0
[ 1064.276712] [<ffffffff81452815>] device_add+0x3b5/0x610
[ 1064.276716] [<ffffffff81487df5>] scsi_sysfs_add_sdev+0xa5/0x290
[ 1064.276718] [<ffffffff81485355>] scsi_probe_and_add_lun+0xb65/0xd80
[ 1064.276722] [<ffffffff814608ac>] ? __pm_runtime_resume+0x5c/0x70
[ 1064.276724] [<ffffffff81485d67>] __scsi_scan_target+0xf7/0x260
[ 1064.276725] [<ffffffff814608ac>] ? __pm_runtime_resume+0x5c/0x70
[ 1064.276727] [<ffffffff81485fa7>] scsi_scan_target+0xd7/0xf0
[ 1064.276734] [<ffffffffa07c29f5>]
iscsi_user_scan_session.part.14+0x105/0x140 [scsi_transport_iscsi]
[ 1064.276738] [<ffffffffa07c2a30>] ?
iscsi_user_scan_session.part.14+0x140/0x140 [scsi_transport_iscsi]
[ 1064.276742] [<ffffffffa07c2a4e>] iscsi_user_scan_session+0x1e/0x30
[scsi_transport_iscsi]
[ 1064.276743] [<ffffffff81450b80>] device_for_each_child+0x50/0x90
[ 1064.276747] [<ffffffffa07c083d>] iscsi_user_scan+0x3d/0x60
[scsi_transport_iscsi]
[ 1064.276749] [<ffffffff81487bb6>] store_scan+0xa6/0x100
[ 1064.276753] [<ffffffff811e3158>] ? __kmalloc+0x1b8/0x250
[ 1064.276757] [<ffffffff81450318>] dev_attr_store+0x18/0x30
[ 1064.276759] [<ffffffff8128170a>] sysfs_kf_write+0x3a/0x50
[ 1064.276760] [<ffffffff81280d90>] kernfs_fop_write+0x120/0x170
[ 1064.276762] [<ffffffff81203f17>] __vfs_write+0x37/0x100
[ 1064.276765] [<ffffffff812b6c03>] ? selinux_file_permission+0xc3/0x110
[ 1064.276769] [<ffffffff812ae75d>] ? security_file_permission+0x3d/0xc0
[ 1064.276772] [<ffffffff810cd95f>] ? percpu_down_read+0x1f/0x50
[ 1064.276773] [<ffffffff812045f2>] vfs_write+0xa2/0x1a0
[ 1064.276776] [<ffffffff81003176>] ? do_audit_syscall_entry+0x66/0x70
[ 1064.276777] [<ffffffff812053b5>] SyS_write+0x55/0xc0
[ 1064.276780] [<ffffffff816945ae>] entry_SYSCALL_64_fastpath+0x12/0x71
[ 1064.276781] ---[ end trace bcfb1475313b5f67 ]---
[ 1064.276817] scsi 7:0:0:0: failed to add device: -17
Thank you
Serguei
-----Original Message-----
From: Michael Christie [mailto:michaelc@cs.wisc.edu]
Sent: Friday, January 29, 2016 3:02 AM
To: Serguei Bezverkhi (sbezverk) <sbezverk@cisco.com>
Cc: bugzilla-daemon@bugzilla.kernel.org; linux-scsi@vger.kernel.org
Subject: Re: [Bug 111441] New: iscsi fails to attach to targets
Can you send me your lio config?
Are you running lio on the same box as the initiator so it is also changing
kernel version with each test?
It looks like the scsi scan code is not handling the lack of LUN 0 correctly. I
think I know what patch is causing it, but cannot get my lio config to return
the same info as you for the non existent LUNs, so I think I am hitting
slightly different error paths.
> On Jan 28, 2016, at 8:55 PM, Serguei Bezverkhi (sbezverk) <sbezverk@cisco.com> wrote:
>
> HI Mike,
>
> Thank you for looking into this issue.
> I reproduced this issue this using both mainline compiled kernel and the one posted by El Repo. I used both of these kernels with RHEL 7.2, both kernels showed exactly the same issue. When I rollback to the original kernel 3.10.0-327.4.4, I do not see the issue.
>
> As per your request attaching kernel config file. Please let me know if you need any additional info or if you want to take a look at the router, I can setup a webex meeting to show you the issue.
>
> Thank you
>
> Serguei
>
>
>
>
> Serguei Bezverkhi,
> TECHNICAL LEADER.SERVICES
> Global SP Services
> sbezverk@cisco.com
> Phone: +1 416 306 7312
> Mobile: +1 514 234 7374
>
> CCIE (R&S,SP,Sec) - #9527
>
> Cisco.com
>
>
>
> Think before you print.
> This email may contain confidential and privileged material for the sole use of the intended recipient. Any review, use, distribution or disclosure by others is strictly prohibited. If you are not the intended recipient (or authorized to receive for the recipient), please contact the sender by reply email and delete all copies of this message.
> Please click here for Company Registration Information.
>
>
>
>
> -----Original Message-----
> From: linux-scsi-owner@vger.kernel.org [mailto:linux-scsi-owner@vger.kernel.org] On Behalf Of Mike Christie
> Sent: Thursday, January 28, 2016 8:53 PM
> To: bugzilla-daemon@bugzilla.kernel.org; linux-scsi@vger.kernel.org
> Subject: Re: [Bug 111441] New: iscsi fails to attach to targets
>
> On 01/28/2016 04:51 PM, bugzilla-daemon@bugzilla.kernel.org wrote:
>> https://bugzilla.kernel.org/show_bug.cgi?id=111441
>>
>> Bug ID: 111441
>> Summary: iscsi fails to attach to targets
>> Product: IO/Storage
>> Version: 2.5
>> Kernel Version: 4.4.0-1
>> Hardware: x86-64
>> OS: Linux
>> Tree: Mainline
>> Status: NEW
>
>
>> 4.4.0-1.el7.elrepo.x86_64 #1
>
> I have not seen this oops before. We saw similar ones around 5 or 6 years ago, but they were due to some sysfs or block or scsi issue (I cannot remember exacty) and fixed there.
>
> Is this a distro kernel or mainline. BZ says mainline, but the kernel name in bug looks like a red hat related one. Where did you get it?
>
> I do not hit this in 4.4 mainline. Send me your kernel .config, so I can make sure I have the same options.
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-scsi" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
--
You are receiving this mail because:
You are the assignee for the bug.
^ permalink raw reply [flat|nested] 46+ messages in thread* [Bug 111441] iscsi fails to attach to targets
2016-01-28 22:51 [Bug 111441] New: iscsi fails to attach to targets bugzilla-daemon
` (5 preceding siblings ...)
2016-01-29 12:04 ` bugzilla-daemon
@ 2016-01-29 19:11 ` bugzilla-daemon
2016-01-29 22:21 ` bugzilla-daemon
` (12 subsequent siblings)
19 siblings, 0 replies; 46+ messages in thread
From: bugzilla-daemon @ 2016-01-29 19:11 UTC (permalink / raw)
To: linux-scsi
https://bugzilla.kernel.org/show_bug.cgi?id=111441
--- Comment #6 from Serguei Bezverkhi <sbezverk@cisco.com> ---
If you send me the diff for your patch, I will build new kernel myself.
Serguei
Serguei Bezverkhi,
TECHNICAL LEADER.SERVICES
Global SP Services
sbezverk@cisco.com
Phone: +1 416 306 7312
Mobile: +1 514 234 7374
CCIE (R&S,SP,Sec) - #9527
Cisco.com
Think before you print.
This email may contain confidential and privileged material for the sole use of
the intended recipient. Any review, use, distribution or disclosure by others
is strictly prohibited. If you are not the intended recipient (or authorized to
receive for the recipient), please contact the sender by reply email and delete
all copies of this message.
Please click here for Company Registration Information.
-----Original Message-----
From: Michael Christie [mailto:michaelc@cs.wisc.edu]
Sent: Friday, January 29, 2016 2:09 PM
To: Serguei Bezverkhi (sbezverk) <sbezverk@cisco.com>
Cc: bugzilla-daemon@bugzilla.kernel.org; linux-scsi@vger.kernel.org
Subject: Re: [Bug 111441] New: iscsi fails to attach to targets
> On Jan 29, 2016, at 6:04 AM, Serguei Bezverkhi (sbezverk) <sbezverk@cisco.com> wrote:
>
> Actually this server uses both cases: Local taregts (since it is OpenStack server) and remote targets as it tries to mount 4 remotefile systems.
>
> You are correct, I always use the same box I just change the kernel it is using to boot. No other changes to the environment. I do not mind to load a test kernel without that suspected patch, just get me the RPM.
>
I do not know what you mean. I think the patch I sent will fix the sysfs errors
caused due to alua not being setup properly on your system and scsi_dh_alua
failing to attach. That patch should be applied to the 4.4 upstream kernel. Are
you saying you want me to make you a kernel rpm?
--
You are receiving this mail because:
You are the assignee for the bug.--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 46+ messages in thread* [Bug 111441] iscsi fails to attach to targets
2016-01-28 22:51 [Bug 111441] New: iscsi fails to attach to targets bugzilla-daemon
` (6 preceding siblings ...)
2016-01-29 19:11 ` bugzilla-daemon
@ 2016-01-29 22:21 ` bugzilla-daemon
2016-01-30 7:46 ` bugzilla-daemon
` (11 subsequent siblings)
19 siblings, 0 replies; 46+ messages in thread
From: bugzilla-daemon @ 2016-01-29 22:21 UTC (permalink / raw)
To: linux-scsi
https://bugzilla.kernel.org/show_bug.cgi?id=111441
--- Comment #7 from Serguei Bezverkhi <sbezverk@cisco.com> ---
HI Mike,
I tried your patch and it is has eliminated first traceback but I still do not
see my remote targets.
Here is dmesg
[ 26.103812] scsi 3:0:0:2: Direct-Access LIO-ORG san-disk-2 4.0
PQ: 0 ANSI: 5
[ 26.104338] sd 3:0:0:2: alua: supports implicit and explicit TPGS
[ 26.104549] sd 3:0:0:2: alua: No target port descriptors found
[ 26.104552] sd 3:0:0:2: alua: Attach failed (-22)
[ 26.104554] sd 3:0:0:2: failed to add device handler: -22
[ 26.104578] sd 3:0:0:2: [sdc] 20507809792 512-byte logical blocks: (10.4
TB/9.54 TiB)
[ 26.104905] sd 3:0:0:2: [sdc] Write Protect is off
[ 26.104908] sd 3:0:0:2: [sdc] Mode Sense: 43 00 10 08
[ 26.105036] sd 3:0:0:2: [sdc] Write cache: enabled, read cache: enabled,
supports DPO and FUA
[ 26.112294] scsi host6: iSCSI Initiator over TCP/IP
[ 26.113279] scsi 4:0:0:3: Direct-Access LIO-ORG san-disk-3 4.0
PQ: 0 ANSI: 5
[ 26.113690] sd 4:0:0:3: alua: supports implicit and explicit TPGS
[ 26.113877] sd 4:0:0:3: [sdd] 9765625856 512-byte logical blocks: (5.00
TB/4.54 TiB)
[ 26.113948] sd 4:0:0:3: alua: No target port descriptors found
[ 26.113951] sd 4:0:0:3: alua: Attach failed (-22)
[ 26.113953] sd 4:0:0:3: failed to add device handler: -22
[ 26.114292] sd 4:0:0:3: [sdd] Write Protect is off
[ 26.114295] sd 4:0:0:3: [sdd] Mode Sense: 43 00 10 08
[ 26.114503] sd 4:0:0:3: [sdd] Write cache: enabled, read cache: enabled,
supports DPO and FUA
[ 26.123875] scsi 5:0:0:1: Direct-Access LIO-ORG san-disk-1 4.0
PQ: 0 ANSI: 5
[ 26.123911] scsi 6:0:0:4: Direct-Access LIO-ORG san-disk-4 4.0
PQ: 0 ANSI: 5
[ 26.124452] sd 6:0:0:4: alua: supports implicit and explicit TPGS
[ 26.124453] sd 5:0:0:1: alua: supports implicit and explicit TPGS
[ 26.124724] sd 5:0:0:1: alua: No target port descriptors found
[ 26.124727] sd 5:0:0:1: alua: Attach failed (-22)
[ 26.124728] sd 5:0:0:1: failed to add device handler: -22
[ 26.124736] sd 6:0:0:4: [sde] 10742171648 512-byte logical blocks: (5.49
TB/5.00 TiB)
[ 26.124773] sd 5:0:0:1: [sdf] 7812499389 512-byte logical blocks: (3.99
TB/3.63 TiB)
[ 26.124777] sd 6:0:0:4: alua: No target port descriptors found
[ 26.124779] sd 6:0:0:4: alua: Attach failed (-22)
[ 26.124780] sd 6:0:0:4: failed to add device handler: -22
[ 26.125182] sd 5:0:0:1: [sdf] Write Protect is off
[ 26.125184] sd 5:0:0:1: [sdf] Mode Sense: 43 00 10 08
[ 26.125217] sd 6:0:0:4: [sde] Write Protect is off
[ 26.125220] sd 6:0:0:4: [sde] Mode Sense: 43 00 10 08
[ 26.125306] sd 5:0:0:1: [sdf] Write cache: enabled, read cache: enabled,
supports DPO and FUA
[ 26.125512] sd 6:0:0:4: [sde] Write cache: enabled, read cache: enabled,
supports DPO and FUA
[ 26.129633] sdf: sdf1
[ 26.130637] sd 5:0:0:1: [sdf] Attached SCSI disk
[ 26.144377] ixgbe 0000:04:00.0: registered PHC device on enp4s0f0
[ 26.149072] sdc: sdc1
[ 26.150434] sd 3:0:0:2: [sdc] Attached SCSI disk
[ 26.190709] sdd: sdd1 sdd2
[ 26.193348] sd 4:0:0:3: [sdd] Attached SCSI disk
[ 26.230515] sde: sde1
[ 26.231674] sd 6:0:0:4: [sde] Attached SCSI disk
[ 26.231987] sd 6:0:0:4: [sde] Synchronizing SCSI cache
[ 26.232021] sd 5:0:0:1: [sdf] Synchronizing SCSI cache
[ 26.233212] sd 3:0:0:2: [sdc] Synchronizing SCSI cache
[ 26.233440] sd 4:0:0:3: [sdd] Synchronizing SCSI cache
[ 26.236755] Buffer I/O error on dev sdc, logical block 2563476132, async
page read
[ 26.238897] Buffer I/O error on dev sdd, logical block 1220703182, async
page read
[ 26.245773] ixgbe 0000:04:00.1: SR-IOV enabled with 8 VFs
[ 26.245775] ixgbe 0000:04:00.1: configure port vlans to keep your VFs secure
[ 26.274544] scsi 6:0:0:0: Unexpected response from lun 4 while scanning,
scan aborted
[ 26.283173] scsi 3:0:0:0: Unexpected response from lun 2 while scanning,
scan aborted
[ 26.288571] scsi 4:0:0:0: Unexpected response from lun 3 while scanning,
scan aborted
[ 26.288618] scsi 5:0:0:0: Unexpected response from lun 1 while scanning,
scan aborted
Second traceback is gone too, but still no luck attaching local iscsi targets
either.
[ 639.148875] TARGET_CORE[iSCSI]: Expected Transfer Length: 264 does not match
SCSI CDB Length: 8 for SAM Opcode: 0x12
[ 639.148911] sd 7:0:0:0: [sdc] 115343360 512-byte logical blocks: (59.0
GB/55.0 GiB)
[ 639.148925] sd 7:0:0:0: alua: No target port descriptors found
[ 639.148928] sd 7:0:0:0: alua: Attach failed (-22)
[ 639.149186] sd 7:0:0:0: [sdc] Write Protect is off
[ 639.149188] sd 7:0:0:0: [sdc] Mode Sense: 43 00 10 08
[ 639.149279] sd 7:0:0:0: [sdc] Write cache: enabled, read cache: enabled,
supports DPO and FUA
[ 639.149298] iSCSI/iqn.1994-05.com.redhat:cf7f1fafca4b: Unsupported SCSI
Opcode 0xa3, sending CHECK_CONDITION.
[ 639.149530] sd 7:0:0:0: failed to add device handler: -22
[ 639.154762] sd 7:0:0:0: [sdc] Attached SCSI disk
[ 639.154857] sd 7:0:0:0: [sdc] Synchronizing SCSI cache
[ 655.279047] scsi 7:0:0:0: Direct-Access LIO-ORG IBLOCK 4.0
PQ: 0 ANSI: 5
[ 655.279397] sd 7:0:0:0: alua: supports implicit and explicit TPGS
[ 655.279503] TARGET_CORE[iSCSI]: Expected Transfer Length: 264 does not match
SCSI CDB Length: 8 for SAM Opcode: 0x12
[ 655.279533] sd 7:0:0:0: alua: No target port descriptors found
[ 655.279535] sd 7:0:0:0: alua: Attach failed (-22)
[ 655.279587] sd 7:0:0:0: [sdc] 115343360 512-byte logical blocks: (59.0
GB/55.0 GiB)
[ 655.279848] sd 7:0:0:0: [sdc] Write Protect is off
[ 655.279849] sd 7:0:0:0: [sdc] Mode Sense: 43 00 10 08
[ 655.279981] sd 7:0:0:0: [sdc] Write cache: enabled, read cache: enabled,
supports DPO and FUA
[ 655.280034] iSCSI/iqn.1994-05.com.redhat:cf7f1fafca4b: Unsupported SCSI
Opcode 0xa3, sending CHECK_CONDITION.
[ 655.280171] sd 7:0:0:0: failed to add device handler: -22
[ 655.286008] sd 7:0:0:0: [sdc] Attached SCSI disk
[ 655.286132] sd 7:0:0:0: [sdc] Synchronizing SCSI cache
Serguei Bezverkhi,
TECHNICAL LEADER.SERVICES
Global SP Services
sbezverk@cisco.com
Phone: +1 416 306 7312
Mobile: +1 514 234 7374
CCIE (R&S,SP,Sec) - #9527
Cisco.com
Think before you print.
This email may contain confidential and privileged material for the sole use of
the intended recipient. Any review, use, distribution or disclosure by others
is strictly prohibited. If you are not the intended recipient (or authorized to
receive for the recipient), please contact the sender by reply email and delete
all copies of this message.
Please click here for Company Registration Information.
-----Original Message-----
From: Mike Christie [mailto:michaelc@cs.wisc.edu]
Sent: Friday, January 29, 2016 2:27 PM
To: Serguei Bezverkhi (sbezverk) <sbezverk@cisco.com>
Cc: bugzilla-daemon@bugzilla.kernel.org; linux-scsi@vger.kernel.org
Subject: Re: [Bug 111441] New: iscsi fails to attach to targets
On 01/29/2016 01:11 PM, Serguei Bezverkhi (sbezverk) wrote:
> If you send me the diff for your patch, I will build new kernel myself.
>
Bugzilla must be messing something up. I attached to one of the previous mails.
Attaching it here again.
Email me offlist and without bugzilla if you do not get it here.
The patch will fix the syfs bug ons you are hitting.
I am not sure if it will fix the genhd one. We can deal with that one next if
it is a different issue.
> Serguei
>
>
> Serguei Bezverkhi,
> TECHNICAL LEADER.SERVICES
> Global SP Services
> sbezverk@cisco.com
> Phone: +1 416 306 7312
> Mobile: +1 514 234 7374
>
> CCIE (R&S,SP,Sec) - #9527
>
> Cisco.com
>
>
>
> Think before you print.
> This email may contain confidential and privileged material for the sole use of the intended recipient. Any review, use, distribution or disclosure by others is strictly prohibited. If you are not the intended recipient (or authorized to receive for the recipient), please contact the sender by reply email and delete all copies of this message.
> Please click here for Company Registration Information.
>
>
>
>
> -----Original Message-----
> From: Michael Christie [mailto:michaelc@cs.wisc.edu]
> Sent: Friday, January 29, 2016 2:09 PM
> To: Serguei Bezverkhi (sbezverk) <sbezverk@cisco.com>
> Cc: bugzilla-daemon@bugzilla.kernel.org; linux-scsi@vger.kernel.org
> Subject: Re: [Bug 111441] New: iscsi fails to attach to targets
>
>
>> On Jan 29, 2016, at 6:04 AM, Serguei Bezverkhi (sbezverk) <sbezverk@cisco.com> wrote:
>>
>> Actually this server uses both cases: Local taregts (since it is OpenStack server) and remote targets as it tries to mount 4 remotefile systems.
>>
>> You are correct, I always use the same box I just change the kernel it is using to boot. No other changes to the environment. I do not mind to load a test kernel without that suspected patch, just get me the RPM.
>>
>
> I do not know what you mean. I think the patch I sent will fix the sysfs errors caused due to alua not being setup properly on your system and scsi_dh_alua failing to attach. That patch should be applied to the 4.4 upstream kernel. Are you saying you want me to make you a kernel rpm?
> --
> To unsubscribe from this list: send the line "unsubscribe linux-scsi"
> in the body of a message to majordomo@vger.kernel.org More majordomo
> info at http://vger.kernel.org/majordomo-info.html
>
--
You are receiving this mail because:
You are the assignee for the bug.--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 46+ messages in thread* [Bug 111441] iscsi fails to attach to targets
2016-01-28 22:51 [Bug 111441] New: iscsi fails to attach to targets bugzilla-daemon
` (7 preceding siblings ...)
2016-01-29 22:21 ` bugzilla-daemon
@ 2016-01-30 7:46 ` bugzilla-daemon
2016-02-01 2:13 ` bugzilla-daemon
` (10 subsequent siblings)
19 siblings, 0 replies; 46+ messages in thread
From: bugzilla-daemon @ 2016-01-30 7:46 UTC (permalink / raw)
To: linux-scsi
https://bugzilla.kernel.org/show_bug.cgi?id=111441
--- Comment #8 from nab <nab@linux-iscsi.org> ---
On Fri, 2016-01-29 at 17:32 -0600, Mike Christie wrote:
> On 01/29/2016 04:21 PM, Serguei Bezverkhi (sbezverk) wrote:
> > HI Mike,
> >
> > I tried your patch and it is has eliminated first traceback but I still do not see my remote targets.
> >
>
> That is sort of expected. Your target is not setup for ALUA properly. It
> says it supports ALUA, but when scsi_dh_alua asks about the ports it is
> reporting there are none. Ccing the people that made the patch that
> added the issue and own the code.
>
> Hey Christoph and Hannes,
>
> The dh/alua changes that added this:
>
> error = scsi_dh_add_device(sdev);
> if (error) {
> sdev_printk(KERN_INFO, sdev,
> "failed to add device handler: %d\n",
> error);
> return error;
> }
>
> to scsi_sysfs_add_sdev are adding a regression.
>
> 1. If that fails, then we forget to do device_del before doing the
> return. My patch in this thread added that back, so we do not see the
> sysfs oopses anymore. But.....
>
> 2. It looks like in older kernels, we would allow misconfigured targets
> like this one to still setup devices. Do we want that old behavior back?
> Should we just ignore the return value from scsi_dh_add_device above?
> Note that in this case, it is LIO so it can be easily fixed on the
> target side by just setting it up properly. I do not think other targets
> would hit this type of issue.
>
Btw, what does misconfigured mean here wrt target ALUA..?
--
You are receiving this mail because:
You are the assignee for the bug.
^ permalink raw reply [flat|nested] 46+ messages in thread* [Bug 111441] iscsi fails to attach to targets
2016-01-28 22:51 [Bug 111441] New: iscsi fails to attach to targets bugzilla-daemon
` (8 preceding siblings ...)
2016-01-30 7:46 ` bugzilla-daemon
@ 2016-02-01 2:13 ` bugzilla-daemon
2016-02-02 16:41 ` bugzilla-daemon
` (9 subsequent siblings)
19 siblings, 0 replies; 46+ messages in thread
From: bugzilla-daemon @ 2016-02-01 2:13 UTC (permalink / raw)
To: linux-scsi
https://bugzilla.kernel.org/show_bug.cgi?id=111441
--- Comment #9 from Serguei Bezverkhi <sbezverk@cisco.com> ---
Hi Mike,
I have built a new kernel with debug and collected dmesg, hopefully this log
has more info to understand why alua fails to attach remote targets with error
-22.
Please see attached log.
Thank you
Serguei
Serguei Bezverkhi,
TECHNICAL LEADER.SERVICES
Global SP Services
sbezverk@cisco.com
Phone: +1 416 306 7312
Mobile: +1 514 234 7374
CCIE (R&S,SP,Sec) - #9527
Cisco.com
Think before you print.
This email may contain confidential and privileged material for the sole use of
the intended recipient. Any review, use, distribution or disclosure by others
is strictly prohibited. If you are not the intended recipient (or authorized to
receive for the recipient), please contact the sender by reply email and delete
all copies of this message.
Please click here for Company Registration Information.
-----Original Message-----
From: Nicholas A. Bellinger [mailto:nab@linux-iscsi.org]
Sent: Saturday, January 30, 2016 2:39 AM
To: Mike Christie <michaelc@cs.wisc.edu>
Cc: Serguei Bezverkhi (sbezverk) <sbezverk@cisco.com>;
bugzilla-daemon@bugzilla.kernel.org; linux-scsi@vger.kernel.org; Christoph
Hellwig <hch@infradead.org>; Hannes Reinecke <hare@suse.de>
Subject: Re: [Bug 111441] New: iscsi fails to attach to targets
On Fri, 2016-01-29 at 17:32 -0600, Mike Christie wrote:
> On 01/29/2016 04:21 PM, Serguei Bezverkhi (sbezverk) wrote:
> > HI Mike,
> >
> > I tried your patch and it is has eliminated first traceback but I still do not see my remote targets.
> >
>
> That is sort of expected. Your target is not setup for ALUA properly.
> It says it supports ALUA, but when scsi_dh_alua asks about the ports
> it is reporting there are none. Ccing the people that made the patch
> that added the issue and own the code.
>
> Hey Christoph and Hannes,
>
> The dh/alua changes that added this:
>
> error = scsi_dh_add_device(sdev);
> if (error) {
> sdev_printk(KERN_INFO, sdev,
> "failed to add device handler: %d\n",
> error);
> return error;
> }
>
> to scsi_sysfs_add_sdev are adding a regression.
>
> 1. If that fails, then we forget to do device_del before doing the
> return. My patch in this thread added that back, so we do not see the
> sysfs oopses anymore. But.....
>
> 2. It looks like in older kernels, we would allow misconfigured
> targets like this one to still setup devices. Do we want that old behavior back?
> Should we just ignore the return value from scsi_dh_add_device above?
> Note that in this case, it is LIO so it can be easily fixed on the
> target side by just setting it up properly. I do not think other
> targets would hit this type of issue.
>
Btw, what does misconfigured mean here wrt target ALUA..?
--
You are receiving this mail because:
You are the assignee for the bug.--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 46+ messages in thread* [Bug 111441] iscsi fails to attach to targets
2016-01-28 22:51 [Bug 111441] New: iscsi fails to attach to targets bugzilla-daemon
` (9 preceding siblings ...)
2016-02-01 2:13 ` bugzilla-daemon
@ 2016-02-02 16:41 ` bugzilla-daemon
2016-02-02 20:25 ` bugzilla-daemon
` (8 subsequent siblings)
19 siblings, 0 replies; 46+ messages in thread
From: bugzilla-daemon @ 2016-02-02 16:41 UTC (permalink / raw)
To: linux-scsi
https://bugzilla.kernel.org/show_bug.cgi?id=111441
--- Comment #10 from Serguei Bezverkhi <sbezverk@cisco.com> ---
Hello,
Any chance we could move forward with this investigation? I still cannot attach
to any remove iscsi targets with either 4.4.0 or 4.4.1 kernels.
Thank you
Serguei
-----Original Message-----
From: Mike Christie [mailto:michaelc@cs.wisc.edu]
Sent: Monday, February 01, 2016 11:55 AM
To: Nicholas A. Bellinger <nab@linux-iscsi.org>
Cc: Serguei Bezverkhi (sbezverk) <sbezverk@cisco.com>;
bugzilla-daemon@bugzilla.kernel.org; linux-scsi@vger.kernel.org; Christoph
Hellwig <hch@infradead.org>; Hannes Reinecke <hare@suse.de>
Subject: Re: [Bug 111441] New: iscsi fails to attach to targets
On 01/30/2016 01:38 AM, Nicholas A. Bellinger wrote:
> On Fri, 2016-01-29 at 17:32 -0600, Mike Christie wrote:
>> On 01/29/2016 04:21 PM, Serguei Bezverkhi (sbezverk) wrote:
>>> HI Mike,
>>>
>>> I tried your patch and it is has eliminated first traceback but I still do not see my remote targets.
>>>
>>
>> That is sort of expected. Your target is not setup for ALUA properly.
>> It says it supports ALUA, but when scsi_dh_alua asks about the ports
>> it is reporting there are none. Ccing the people that made the patch
>> that added the issue and own the code.
>>
>> Hey Christoph and Hannes,
>>
>> The dh/alua changes that added this:
>>
>> error = scsi_dh_add_device(sdev);
>> if (error) {
>> sdev_printk(KERN_INFO, sdev,
>> "failed to add device handler: %d\n",
>> error);
>> return error;
>> }
>>
>> to scsi_sysfs_add_sdev are adding a regression.
>>
>> 1. If that fails, then we forget to do device_del before doing the
>> return. My patch in this thread added that back, so we do not see the
>> sysfs oopses anymore. But.....
>>
>> 2. It looks like in older kernels, we would allow misconfigured
>> targets like this one to still setup devices. Do we want that old behavior back?
>> Should we just ignore the return value from scsi_dh_add_device above?
>> Note that in this case, it is LIO so it can be easily fixed on the
>> target side by just setting it up properly. I do not think other
>> targets would hit this type of issue.
>>
>
> Btw, what does misconfigured mean here wrt target ALUA..?
[ 25.833195] sd 6:0:0:4: alua: supports implicit and explicit TPGS
[ 25.833360] sd 6:0:0:4: alua: No target port descriptors found
[ 25.833363] sd 6:0:0:4: alua: Attach failed (-22)
[ 25.833365] sd 6:0:0:4: failed to add device handler: -22
He has LIO configured to report it supports implicit/explicit ALUA, but the
ports do not seem to be configured.
For the LIO config side, are his LUNs just not in a the default_lu_gp or any
other group?
--
You are receiving this mail because:
You are the assignee for the bug.
^ permalink raw reply [flat|nested] 46+ messages in thread* [Bug 111441] iscsi fails to attach to targets
2016-01-28 22:51 [Bug 111441] New: iscsi fails to attach to targets bugzilla-daemon
` (10 preceding siblings ...)
2016-02-02 16:41 ` bugzilla-daemon
@ 2016-02-02 20:25 ` bugzilla-daemon
2016-02-02 22:03 ` bugzilla-daemon
` (7 subsequent siblings)
19 siblings, 0 replies; 46+ messages in thread
From: bugzilla-daemon @ 2016-02-02 20:25 UTC (permalink / raw)
To: linux-scsi
https://bugzilla.kernel.org/show_bug.cgi?id=111441
--- Comment #11 from Serguei Bezverkhi <sbezverk@cisco.com> ---
Sure thing, I will test it tonight and let you know the result.
Thank you
Serguei
-----Original Message-----
From: Mike Christie [mailto:michaelc@cs.wisc.edu]
Sent: Tuesday, February 02, 2016 3:12 PM
To: Christoph Hellwig <hch@infradead.org>
Cc: Serguei Bezverkhi (sbezverk) <sbezverk@cisco.com>;
bugzilla-daemon@bugzilla.kernel.org; linux-scsi@vger.kernel.org; Hannes
Reinecke <hare@suse.de>
Subject: Re: [Bug 111441] New: iscsi fails to attach to targets
On 02/02/2016 12:09 PM, Christoph Hellwig wrote:
> On Fri, Jan 29, 2016 at 05:32:54PM -0600, Mike Christie wrote:
>> Hey Christoph and Hannes,
>>
>> The dh/alua changes that added this:
>>
>> error = scsi_dh_add_device(sdev);
>> if (error) {
>> sdev_printk(KERN_INFO, sdev,
>> "failed to add device handler: %d\n",
>> error);
>> return error;
>> }
>>
>> to scsi_sysfs_add_sdev are adding a regression.
>>
>> 1. If that fails, then we forget to do device_del before doing the
>> return. My patch in this thread added that back, so we do not see the
>> sysfs oopses anymore. But.....
>
> Ok.
>
>> 2. It looks like in older kernels, we would allow misconfigured
>> targets like this one to still setup devices. Do we want that old behavior back?
>> Should we just ignore the return value from scsi_dh_add_device above?
>> Note that in this case, it is LIO so it can be easily fixed on the
>> target side by just setting it up properly. I do not think other
>> targets would hit this type of issue.
>
> Be liberal in what you accept.. I guess we need to continue allowing
> to connect to these broken targets, but a warning would be useful.
>
> Can you send a patch?
Serguei, can you try the attached patch? Drop the other one I sent.
--
You are receiving this mail because:
You are the assignee for the bug.
^ permalink raw reply [flat|nested] 46+ messages in thread* [Bug 111441] iscsi fails to attach to targets
2016-01-28 22:51 [Bug 111441] New: iscsi fails to attach to targets bugzilla-daemon
` (11 preceding siblings ...)
2016-02-02 20:25 ` bugzilla-daemon
@ 2016-02-02 22:03 ` bugzilla-daemon
2016-02-02 22:56 ` bugzilla-daemon
` (6 subsequent siblings)
19 siblings, 0 replies; 46+ messages in thread
From: bugzilla-daemon @ 2016-02-02 22:03 UTC (permalink / raw)
To: linux-scsi
https://bugzilla.kernel.org/show_bug.cgi?id=111441
--- Comment #12 from Serguei Bezverkhi <sbezverk@cisco.com> ---
HI Mike,
It is working now, it spits alua related error messages but it attaches remote
and local targets, so my OpenStack is back to life. Please let me know if you
plan to commit this fix upstream.
[ 27.579303] scsi 3:0:0:2: Direct-Access LIO-ORG san-disk-2 4.0
PQ: 0 ANSI: 5
[ 27.579797] sd 3:0:0:2: alua: supports implicit and explicit TPGS
[ 27.579932] sd 3:0:0:2: [sdc] 20507809792 512-byte logical blocks: (10.4
TB/9.54 TiB)
[ 27.579975] sd 3:0:0:2: alua: No target port descriptors found
[ 27.579977] sd 3:0:0:2: alua: Attach failed (-22)
[ 27.580640] sd 3:0:0:2: failed to add device handler: -22
[ 27.580897] sd 3:0:0:2: [sdc] Write Protect is off
[ 27.580899] sd 3:0:0:2: [sdc] Mode Sense: 43 00 10 08
[ 27.580922] sd 3:0:0:2: Attached scsi generic sg3 type 0
[ 27.581041] sd 3:0:0:2: [sdc] Write cache: enabled, read cache: enabled,
supports DPO and FUA
[ 27.630156] sd 3:0:0:2: [sdc] Attached SCSI disk
Thank you very much
Serguei
Serguei Bezverkhi,
TECHNICAL LEADER.SERVICES
Global SP Services
sbezverk@cisco.com
Phone: +1 416 306 7312
Mobile: +1 514 234 7374
CCIE (R&S,SP,Sec) - #9527
Cisco.com
Think before you print.
This email may contain confidential and privileged material for the sole use of
the intended recipient. Any review, use, distribution or disclosure by others
is strictly prohibited. If you are not the intended recipient (or authorized to
receive for the recipient), please contact the sender by reply email and delete
all copies of this message.
Please click here for Company Registration Information.
-----Original Message-----
From: Mike Christie [mailto:michaelc@cs.wisc.edu]
Sent: Tuesday, February 02, 2016 3:12 PM
To: Christoph Hellwig <hch@infradead.org>
Cc: Serguei Bezverkhi (sbezverk) <sbezverk@cisco.com>;
bugzilla-daemon@bugzilla.kernel.org; linux-scsi@vger.kernel.org; Hannes
Reinecke <hare@suse.de>
Subject: Re: [Bug 111441] New: iscsi fails to attach to targets
On 02/02/2016 12:09 PM, Christoph Hellwig wrote:
> On Fri, Jan 29, 2016 at 05:32:54PM -0600, Mike Christie wrote:
>> Hey Christoph and Hannes,
>>
>> The dh/alua changes that added this:
>>
>> error = scsi_dh_add_device(sdev);
>> if (error) {
>> sdev_printk(KERN_INFO, sdev,
>> "failed to add device handler: %d\n",
>> error);
>> return error;
>> }
>>
>> to scsi_sysfs_add_sdev are adding a regression.
>>
>> 1. If that fails, then we forget to do device_del before doing the
>> return. My patch in this thread added that back, so we do not see the
>> sysfs oopses anymore. But.....
>
> Ok.
>
>> 2. It looks like in older kernels, we would allow misconfigured
>> targets like this one to still setup devices. Do we want that old behavior back?
>> Should we just ignore the return value from scsi_dh_add_device above?
>> Note that in this case, it is LIO so it can be easily fixed on the
>> target side by just setting it up properly. I do not think other
>> targets would hit this type of issue.
>
> Be liberal in what you accept.. I guess we need to continue allowing
> to connect to these broken targets, but a warning would be useful.
>
> Can you send a patch?
Serguei, can you try the attached patch? Drop the other one I sent.
--
You are receiving this mail because:
You are the assignee for the bug.--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 46+ messages in thread* [Bug 111441] iscsi fails to attach to targets
2016-01-28 22:51 [Bug 111441] New: iscsi fails to attach to targets bugzilla-daemon
` (12 preceding siblings ...)
2016-02-02 22:03 ` bugzilla-daemon
@ 2016-02-02 22:56 ` bugzilla-daemon
2016-02-02 23:21 ` bugzilla-daemon
` (5 subsequent siblings)
19 siblings, 0 replies; 46+ messages in thread
From: bugzilla-daemon @ 2016-02-02 22:56 UTC (permalink / raw)
To: linux-scsi
https://bugzilla.kernel.org/show_bug.cgi?id=111441
--- Comment #13 from nab <nab@linux-iscsi.org> ---
On Mon, 2016-02-01 at 10:55 -0600, Mike Christie wrote:
> On 01/30/2016 01:38 AM, Nicholas A. Bellinger wrote:
> > On Fri, 2016-01-29 at 17:32 -0600, Mike Christie wrote:
> >> On 01/29/2016 04:21 PM, Serguei Bezverkhi (sbezverk) wrote:
> >>> HI Mike,
> >>>
> >>> I tried your patch and it is has eliminated first traceback but I still do not see my remote targets.
> >>>
> >>
> >> That is sort of expected. Your target is not setup for ALUA properly. It
> >> says it supports ALUA, but when scsi_dh_alua asks about the ports it is
> >> reporting there are none. Ccing the people that made the patch that
> >> added the issue and own the code.
> >>
> >> Hey Christoph and Hannes,
> >>
> >> The dh/alua changes that added this:
> >>
> >> error = scsi_dh_add_device(sdev);
> >> if (error) {
> >> sdev_printk(KERN_INFO, sdev,
> >> "failed to add device handler: %d\n",
> >> error);
> >> return error;
> >> }
> >>
> >> to scsi_sysfs_add_sdev are adding a regression.
> >>
> >> 1. If that fails, then we forget to do device_del before doing the
> >> return. My patch in this thread added that back, so we do not see the
> >> sysfs oopses anymore. But.....
> >>
> >> 2. It looks like in older kernels, we would allow misconfigured targets
> >> like this one to still setup devices. Do we want that old behavior back?
> >> Should we just ignore the return value from scsi_dh_add_device above?
> >> Note that in this case, it is LIO so it can be easily fixed on the
> >> target side by just setting it up properly. I do not think other targets
> >> would hit this type of issue.
> >>
> >
> > Btw, what does misconfigured mean here wrt target ALUA..?
>
> [ 25.833195] sd 6:0:0:4: alua: supports implicit and explicit TPGS
> [ 25.833360] sd 6:0:0:4: alua: No target port descriptors found
> [ 25.833363] sd 6:0:0:4: alua: Attach failed (-22)
> [ 25.833365] sd 6:0:0:4: failed to add device handler: -22
>
Strange, this hasn't changed in forever on the target side..
> He has LIO configured to report it supports implicit/explicit ALUA, but
> the ports do not seem to be configured.
>
> For the LIO config side, are his LUNs just not in a the default_lu_gp or
> any other group?
So every non-PSCSI backend device becomes part of default_lu_gp +
default_tg_pt_gp and automatically shows up in EVPD=0x83, without user
needing to do any additional configuration.
Here's what the output looks like:
root@haakon3:/usr/src/target-pending.git# sg_inq -Hi /dev/sdb
VPD INQUIRY: Device Identification page
<SNIP>
Designation descriptor number 3, descriptor length: 8
transport: Serial Attached SCSI Protocol (SPL-2)
designator_type: Relative target port, code_set: Binary
associated with the target port
designator header(hex): 61 94 00 04
designator:
00 00 00 00 02 ....
Designation descriptor number 4, descriptor length: 8
transport: Serial Attached SCSI Protocol (SPL-2)
designator_type: Target port group, code_set: Binary
associated with the target port
designator header(hex): 61 95 00 04
designator:
00 00 00 00 00 ....
Designation descriptor number 5, descriptor length: 8
designator_type: Logical unit group, code_set: Binary
associated with the addressed logical unit
designator header(hex): 01 06 00 04
designator:
00 00 00 00 00 ....
<SNIP>
So AFAICT, the relative target port, target port group, and logical unit
group being returned from target on v4.5-rc1 code looks correct.
Serguei, can you confirm with 'sg_inq -Hi /dev/sdX' output on your side
with the v3.10 based target..?
AFAICT the parsing in scsi_vpd_tpg_id() from commit a8aa3978 looks
correct too.
Hannes, any ideas..?
--
You are receiving this mail because:
You are the assignee for the bug.
^ permalink raw reply [flat|nested] 46+ messages in thread* [Bug 111441] iscsi fails to attach to targets
2016-01-28 22:51 [Bug 111441] New: iscsi fails to attach to targets bugzilla-daemon
` (13 preceding siblings ...)
2016-02-02 22:56 ` bugzilla-daemon
@ 2016-02-02 23:21 ` bugzilla-daemon
2016-02-08 8:01 ` bugzilla-daemon
` (4 subsequent siblings)
19 siblings, 0 replies; 46+ messages in thread
From: bugzilla-daemon @ 2016-02-02 23:21 UTC (permalink / raw)
To: linux-scsi
https://bugzilla.kernel.org/show_bug.cgi?id=111441
--- Comment #14 from Serguei Bezverkhi <sbezverk@cisco.com> ---
Here you go, same output to compare for 4.4.1 and 3.10.0
Linux 4.4.1 #1 SMP Tue Feb 2 16:15:36 EST 2016
[root@sbezverk-osp-3 ~(keystone_admin)]# sg_inq -Hi /dev/sdc
VPD INQUIRY: Device Identification page
Designation descriptor number 1, descriptor length: 20
designator_type: NAA, code_set: Binary
associated with the addressed logical unit
designator header(hex): 01 03 00 10
designator:
00 60 01 40 56 5f e9 25 e7 94 a4 20 69 2c 0c b3 c6 `.@V_.%... i,...
Designation descriptor number 2, descriptor length: 60
designator_type: T10 vendor identification, code_set: ASCII
associated with the addressed logical unit
designator header(hex): 02 01 00 38
designator:
00 4c 49 4f 2d 4f 52 47 00 73 61 6e 2d 64 69 73 6b LIO-ORG.san-disk
10 2d 32 3a 36 35 66 65 39 32 35 65 2d 37 39 34 61 -2:65fe925e-794a
20 2d 34 32 30 36 2d 39 32 63 30 2d 63 62 33 63 36 -4206-92c0-cb3c6
30 39 61 35 33 34 39 61 00 9a5349a.
Designation descriptor number 3, descriptor length: 8
transport: Internet SCSI (iSCSI)
designator_type: Relative target port, code_set: Binary
associated with the target port
designator header(hex): 51 94 00 04
designator:
00 00 00 00 01 ....
Designation descriptor number 4, descriptor length: 8
transport: Internet SCSI (iSCSI)
designator_type: Target port group, code_set: Binary
associated with the target port
designator header(hex): 51 95 00 04
designator:
00 00 00 00 00 ....
Designation descriptor number 5, descriptor length: 8
designator_type: Logical unit group, code_set: Binary
associated with the addressed logical unit
designator header(hex): 01 06 00 04
designator:
00 00 00 00 00 ....
Designation descriptor number 6, descriptor length: 80
transport: Internet SCSI (iSCSI)
designator_type: SCSI name string, code_set: UTF-8
associated with the target port
designator header(hex): 53 98 00 4c
designator:
00 69 71 6e 2e 32 30 30 33 2d 30 31 2e 6f 72 67 2e iqn.2003-01.org.
10 6c 69 6e 75 78 2d 69 73 63 73 69 2e 73 62 65 7a linux-iscsi.sbez
20 76 65 72 6b 2d 73 61 6e 2d 31 2e 78 38 36 36 34 verk-san-1.x8664
30 3a 73 6e 2e 33 64 66 63 66 66 62 64 66 66 34 33 :sn.3dfcffbdff43
40 2c 74 2c 30 78 30 30 30 31 00 00 00 ,t,0x0001...
Designation descriptor number 7, descriptor length: 72
transport: Internet SCSI (iSCSI)
designator_type: SCSI name string, code_set: UTF-8
associated with the target device that contains addressed lu
designator header(hex): 53 a8 00 44
designator:
00 69 71 6e 2e 32 30 30 33 2d 30 31 2e 6f 72 67 2e iqn.2003-01.org.
10 6c 69 6e 75 78 2d 69 73 63 73 69 2e 73 62 65 7a linux-iscsi.sbez
20 76 65 72 6b 2d 73 61 6e 2d 31 2e 78 38 36 36 34 verk-san-1.x8664
30 3a 73 6e 2e 33 64 66 63 66 66 62 64 66 66 34 33 :sn.3dfcffbdff43
40 00 00 00 00
Linux 3.10.0-327.4.5.el7.x86_64 #1 SMP Thu Jan 21 04:10:29 EST 2016
[root@sbezverk-osp-3 ~(keystone_admin)]# sg_inq -Hi /dev/sdc
VPD INQUIRY: Device Identification page
Designation descriptor number 1, descriptor length: 20
designator_type: NAA, code_set: Binary
associated with the addressed logical unit
designator header(hex): 01 03 00 10
designator:
00 60 01 40 56 5f e9 25 e7 94 a4 20 69 2c 0c b3 c6 `.@V_.%... i,...
Designation descriptor number 2, descriptor length: 60
designator_type: T10 vendor identification, code_set: ASCII
associated with the addressed logical unit
designator header(hex): 02 01 00 38
designator:
00 4c 49 4f 2d 4f 52 47 00 73 61 6e 2d 64 69 73 6b LIO-ORG.san-disk
10 2d 32 3a 36 35 66 65 39 32 35 65 2d 37 39 34 61 -2:65fe925e-794a
20 2d 34 32 30 36 2d 39 32 63 30 2d 63 62 33 63 36 -4206-92c0-cb3c6
30 39 61 35 33 34 39 61 00 9a5349a.
Designation descriptor number 3, descriptor length: 8
transport: Internet SCSI (iSCSI)
designator_type: Relative target port, code_set: Binary
associated with the target port
designator header(hex): 51 94 00 04
designator:
00 00 00 00 01 ....
Designation descriptor number 4, descriptor length: 8
transport: Internet SCSI (iSCSI)
designator_type: Target port group, code_set: Binary
associated with the target port
designator header(hex): 51 95 00 04
designator:
00 00 00 00 00 ....
Designation descriptor number 5, descriptor length: 8
designator_type: Logical unit group, code_set: Binary
associated with the addressed logical unit
designator header(hex): 01 06 00 04
designator:
00 00 00 00 00 ....
Designation descriptor number 6, descriptor length: 80
transport: Internet SCSI (iSCSI)
designator_type: SCSI name string, code_set: UTF-8
associated with the target port
designator header(hex): 53 98 00 4c
designator:
00 69 71 6e 2e 32 30 30 33 2d 30 31 2e 6f 72 67 2e iqn.2003-01.org.
10 6c 69 6e 75 78 2d 69 73 63 73 69 2e 73 62 65 7a linux-iscsi.sbez
20 76 65 72 6b 2d 73 61 6e 2d 31 2e 78 38 36 36 34 verk-san-1.x8664
30 3a 73 6e 2e 33 64 66 63 66 66 62 64 66 66 34 33 :sn.3dfcffbdff43
40 2c 74 2c 30 78 30 30 30 31 00 00 00 ,t,0x0001...
Designation descriptor number 7, descriptor length: 72
transport: Internet SCSI (iSCSI)
designator_type: SCSI name string, code_set: UTF-8
associated with the target device that contains addressed lu
designator header(hex): 53 a8 00 44
designator:
00 69 71 6e 2e 32 30 30 33 2d 30 31 2e 6f 72 67 2e iqn.2003-01.org.
10 6c 69 6e 75 78 2d 69 73 63 73 69 2e 73 62 65 7a linux-iscsi.sbez
20 76 65 72 6b 2d 73 61 6e 2d 31 2e 78 38 36 36 34 verk-san-1.x8664
30 3a 73 6e 2e 33 64 66 63 66 66 62 64 66 66 34 33 :sn.3dfcffbdff43
40 00 00 00 00
Let me know if you need any additional info.
Thank you
Serguei
-----Original Message-----
From: Nicholas A. Bellinger [mailto:nab@linux-iscsi.org]
Sent: Tuesday, February 02, 2016 5:56 PM
To: Mike Christie <michaelc@cs.wisc.edu>
Cc: Serguei Bezverkhi (sbezverk) <sbezverk@cisco.com>;
bugzilla-daemon@bugzilla.kernel.org; linux-scsi@vger.kernel.org; Christoph
Hellwig <hch@infradead.org>; Hannes Reinecke <hare@suse.de>
Subject: Re: [Bug 111441] New: iscsi fails to attach to targets
On Mon, 2016-02-01 at 10:55 -0600, Mike Christie wrote:
> On 01/30/2016 01:38 AM, Nicholas A. Bellinger wrote:
> > On Fri, 2016-01-29 at 17:32 -0600, Mike Christie wrote:
> >> On 01/29/2016 04:21 PM, Serguei Bezverkhi (sbezverk) wrote:
> >>> HI Mike,
> >>>
> >>> I tried your patch and it is has eliminated first traceback but I still do not see my remote targets.
> >>>
> >>
> >> That is sort of expected. Your target is not setup for ALUA
> >> properly. It says it supports ALUA, but when scsi_dh_alua asks
> >> about the ports it is reporting there are none. Ccing the people
> >> that made the patch that added the issue and own the code.
> >>
> >> Hey Christoph and Hannes,
> >>
> >> The dh/alua changes that added this:
> >>
> >> error = scsi_dh_add_device(sdev);
> >> if (error) {
> >> sdev_printk(KERN_INFO, sdev,
> >> "failed to add device handler:
> >> %d\n", error);
> >> return error;
> >> }
> >>
> >> to scsi_sysfs_add_sdev are adding a regression.
> >>
> >> 1. If that fails, then we forget to do device_del before doing the
> >> return. My patch in this thread added that back, so we do not see
> >> the sysfs oopses anymore. But.....
> >>
> >> 2. It looks like in older kernels, we would allow misconfigured
> >> targets like this one to still setup devices. Do we want that old behavior back?
> >> Should we just ignore the return value from scsi_dh_add_device above?
> >> Note that in this case, it is LIO so it can be easily fixed on the
> >> target side by just setting it up properly. I do not think other
> >> targets would hit this type of issue.
> >>
> >
> > Btw, what does misconfigured mean here wrt target ALUA..?
>
> [ 25.833195] sd 6:0:0:4: alua: supports implicit and explicit TPGS
> [ 25.833360] sd 6:0:0:4: alua: No target port descriptors found
> [ 25.833363] sd 6:0:0:4: alua: Attach failed (-22)
> [ 25.833365] sd 6:0:0:4: failed to add device handler: -22
>
Strange, this hasn't changed in forever on the target side..
> He has LIO configured to report it supports implicit/explicit ALUA,
> but the ports do not seem to be configured.
>
> For the LIO config side, are his LUNs just not in a the default_lu_gp
> or any other group?
So every non-PSCSI backend device becomes part of default_lu_gp +
default_tg_pt_gp and automatically shows up in EVPD=0x83, without user needing
to do any additional configuration.
Here's what the output looks like:
root@haakon3:/usr/src/target-pending.git# sg_inq -Hi /dev/sdb VPD INQUIRY:
Device Identification page
<SNIP>
Designation descriptor number 3, descriptor length: 8
transport: Serial Attached SCSI Protocol (SPL-2)
designator_type: Relative target port, code_set: Binary
associated with the target port
designator header(hex): 61 94 00 04
designator:
00 00 00 00 02 ....
Designation descriptor number 4, descriptor length: 8
transport: Serial Attached SCSI Protocol (SPL-2)
designator_type: Target port group, code_set: Binary
associated with the target port
designator header(hex): 61 95 00 04
designator:
00 00 00 00 00 ....
Designation descriptor number 5, descriptor length: 8
designator_type: Logical unit group, code_set: Binary
associated with the addressed logical unit
designator header(hex): 01 06 00 04
designator:
00 00 00 00 00 ....
<SNIP>
So AFAICT, the relative target port, target port group, and logical unit group
being returned from target on v4.5-rc1 code looks correct.
Serguei, can you confirm with 'sg_inq -Hi /dev/sdX' output on your side with
the v3.10 based target..?
AFAICT the parsing in scsi_vpd_tpg_id() from commit a8aa3978 looks correct too.
Hannes, any ideas..?
--
You are receiving this mail because:
You are the assignee for the bug.
^ permalink raw reply [flat|nested] 46+ messages in thread* [Bug 111441] iscsi fails to attach to targets
2016-01-28 22:51 [Bug 111441] New: iscsi fails to attach to targets bugzilla-daemon
` (14 preceding siblings ...)
2016-02-02 23:21 ` bugzilla-daemon
@ 2016-02-08 8:01 ` bugzilla-daemon
2016-02-22 0:45 ` bugzilla-daemon
` (3 subsequent siblings)
19 siblings, 0 replies; 46+ messages in thread
From: bugzilla-daemon @ 2016-02-08 8:01 UTC (permalink / raw)
To: linux-scsi
https://bugzilla.kernel.org/show_bug.cgi?id=111441
--- Comment #15 from nab <nab@linux-iscsi.org> ---
On Tue, 2016-02-02 at 14:56 -0800, Nicholas A. Bellinger wrote:
> On Mon, 2016-02-01 at 10:55 -0600, Mike Christie wrote:
> > On 01/30/2016 01:38 AM, Nicholas A. Bellinger wrote:
> > > On Fri, 2016-01-29 at 17:32 -0600, Mike Christie wrote:
> > >> On 01/29/2016 04:21 PM, Serguei Bezverkhi (sbezverk) wrote:
> > >>> HI Mike,
> > >>>
> > >>> I tried your patch and it is has eliminated first traceback but I still do not see my remote targets.
> > >>>
> > >>
> > >> That is sort of expected. Your target is not setup for ALUA properly. It
> > >> says it supports ALUA, but when scsi_dh_alua asks about the ports it is
> > >> reporting there are none. Ccing the people that made the patch that
> > >> added the issue and own the code.
> > >>
> > >> Hey Christoph and Hannes,
> > >>
> > >> The dh/alua changes that added this:
> > >>
> > >> error = scsi_dh_add_device(sdev);
> > >> if (error) {
> > >> sdev_printk(KERN_INFO, sdev,
> > >> "failed to add device handler: %d\n",
> > >> error);
> > >> return error;
> > >> }
> > >>
> > >> to scsi_sysfs_add_sdev are adding a regression.
> > >>
> > >> 1. If that fails, then we forget to do device_del before doing the
> > >> return. My patch in this thread added that back, so we do not see the
> > >> sysfs oopses anymore. But.....
> > >>
> > >> 2. It looks like in older kernels, we would allow misconfigured targets
> > >> like this one to still setup devices. Do we want that old behavior back?
> > >> Should we just ignore the return value from scsi_dh_add_device above?
> > >> Note that in this case, it is LIO so it can be easily fixed on the
> > >> target side by just setting it up properly. I do not think other targets
> > >> would hit this type of issue.
> > >>
> > >
> > > Btw, what does misconfigured mean here wrt target ALUA..?
> >
> > [ 25.833195] sd 6:0:0:4: alua: supports implicit and explicit TPGS
> > [ 25.833360] sd 6:0:0:4: alua: No target port descriptors found
> > [ 25.833363] sd 6:0:0:4: alua: Attach failed (-22)
> > [ 25.833365] sd 6:0:0:4: failed to add device handler: -22
> >
>
> Strange, this hasn't changed in forever on the target side..
>
> > He has LIO configured to report it supports implicit/explicit ALUA, but
> > the ports do not seem to be configured.
> >
> > For the LIO config side, are his LUNs just not in a the default_lu_gp or
> > any other group?
>
> So every non-PSCSI backend device becomes part of default_lu_gp +
> default_tg_pt_gp and automatically shows up in EVPD=0x83, without user
> needing to do any additional configuration.
>
> Here's what the output looks like:
>
> root@haakon3:/usr/src/target-pending.git# sg_inq -Hi /dev/sdb
> VPD INQUIRY: Device Identification page
> <SNIP>
> Designation descriptor number 3, descriptor length: 8
> transport: Serial Attached SCSI Protocol (SPL-2)
> designator_type: Relative target port, code_set: Binary
> associated with the target port
> designator header(hex): 61 94 00 04
> designator:
> 00 00 00 00 02 ....
> Designation descriptor number 4, descriptor length: 8
> transport: Serial Attached SCSI Protocol (SPL-2)
> designator_type: Target port group, code_set: Binary
> associated with the target port
> designator header(hex): 61 95 00 04
> designator:
> 00 00 00 00 00 ....
> Designation descriptor number 5, descriptor length: 8
> designator_type: Logical unit group, code_set: Binary
> associated with the addressed logical unit
> designator header(hex): 01 06 00 04
> designator:
> 00 00 00 00 00 ....
> <SNIP>
>
> So AFAICT, the relative target port, target port group, and logical unit
> group being returned from target on v4.5-rc1 code looks correct.
>
> Serguei, can you confirm with 'sg_inq -Hi /dev/sdX' output on your side
> with the v3.10 based target..?
>
> AFAICT the parsing in scsi_vpd_tpg_id() from commit a8aa3978 looks
> correct too.
>
> Hannes, any ideas..?
Ping.
--
You are receiving this mail because:
You are the assignee for the bug.
^ permalink raw reply [flat|nested] 46+ messages in thread* [Bug 111441] iscsi fails to attach to targets
2016-01-28 22:51 [Bug 111441] New: iscsi fails to attach to targets bugzilla-daemon
` (15 preceding siblings ...)
2016-02-08 8:01 ` bugzilla-daemon
@ 2016-02-22 0:45 ` bugzilla-daemon
2016-02-22 7:08 ` bugzilla-daemon
` (2 subsequent siblings)
19 siblings, 0 replies; 46+ messages in thread
From: bugzilla-daemon @ 2016-02-22 0:45 UTC (permalink / raw)
To: linux-scsi
https://bugzilla.kernel.org/show_bug.cgi?id=111441
--- Comment #16 from Serguei Bezverkhi <sbezverk@cisco.com> ---
Hi Mike,
I just wanted to follow up with you to see if the patch got committed to an
upstream kernel if yes, please let me into which version it went.
Thank you
Serguei
Serguei Bezverkhi,
TECHNICAL LEADER.SERVICES
Global SP Services
sbezverk@cisco.com
Phone: +1 416 306 7312
Mobile: +1 514 234 7374
CCIE (R&S,SP,Sec) - #9527
Cisco.com
Think before you print.
This email may contain confidential and privileged material for the sole use of
the intended recipient. Any review, use, distribution or disclosure by others
is strictly prohibited. If you are not the intended recipient (or authorized to
receive for the recipient), please contact the sender by reply email and delete
all copies of this message.
Please click here for Company Registration Information.
-----Original Message-----
From: Mike Christie [mailto:michaelc@cs.wisc.edu]
Sent: Friday, January 29, 2016 6:33 PM
To: Serguei Bezverkhi (sbezverk) <sbezverk@cisco.com>
Cc: bugzilla-daemon@bugzilla.kernel.org; linux-scsi@vger.kernel.org; Christoph
Hellwig <hch@infradead.org>; Hannes Reinecke <hare@suse.de>
Subject: Re: [Bug 111441] New: iscsi fails to attach to targets
On 01/29/2016 04:21 PM, Serguei Bezverkhi (sbezverk) wrote:
> HI Mike,
>
> I tried your patch and it is has eliminated first traceback but I still do not see my remote targets.
>
That is sort of expected. Your target is not setup for ALUA properly. It says
it supports ALUA, but when scsi_dh_alua asks about the ports it is reporting
there are none. Ccing the people that made the patch that added the issue and
own the code.
Hey Christoph and Hannes,
The dh/alua changes that added this:
error = scsi_dh_add_device(sdev);
if (error) {
sdev_printk(KERN_INFO, sdev,
"failed to add device handler: %d\n", error);
return error;
}
to scsi_sysfs_add_sdev are adding a regression.
1. If that fails, then we forget to do device_del before doing the return. My
patch in this thread added that back, so we do not see the sysfs oopses
anymore. But.....
2. It looks like in older kernels, we would allow misconfigured targets like
this one to still setup devices. Do we want that old behavior back?
Should we just ignore the return value from scsi_dh_add_device above?
Note that in this case, it is LIO so it can be easily fixed on the target side
by just setting it up properly. I do not think other targets would hit this
type of issue.
>
> Here is dmesg
>
> [ 26.103812] scsi 3:0:0:2: Direct-Access LIO-ORG san-disk-2 4.0 PQ: 0 ANSI: 5
> [ 26.104338] sd 3:0:0:2: alua: supports implicit and explicit TPGS
> [ 26.104549] sd 3:0:0:2: alua: No target port descriptors found
> [ 26.104552] sd 3:0:0:2: alua: Attach failed (-22)
> [ 26.104554] sd 3:0:0:2: failed to add device handler: -22
> [ 26.104578] sd 3:0:0:2: [sdc] 20507809792 512-byte logical blocks: (10.4 TB/9.54 TiB)
> [ 26.104905] sd 3:0:0:2: [sdc] Write Protect is off
> [ 26.104908] sd 3:0:0:2: [sdc] Mode Sense: 43 00 10 08
> [ 26.105036] sd 3:0:0:2: [sdc] Write cache: enabled, read cache: enabled, supports DPO and FUA
> [ 26.112294] scsi host6: iSCSI Initiator over TCP/IP
> [ 26.113279] scsi 4:0:0:3: Direct-Access LIO-ORG san-disk-3 4.0 PQ: 0 ANSI: 5
> [ 26.113690] sd 4:0:0:3: alua: supports implicit and explicit TPGS
> [ 26.113877] sd 4:0:0:3: [sdd] 9765625856 512-byte logical blocks: (5.00 TB/4.54 TiB)
> [ 26.113948] sd 4:0:0:3: alua: No target port descriptors found
> [ 26.113951] sd 4:0:0:3: alua: Attach failed (-22)
> [ 26.113953] sd 4:0:0:3: failed to add device handler: -22
> [ 26.114292] sd 4:0:0:3: [sdd] Write Protect is off
> [ 26.114295] sd 4:0:0:3: [sdd] Mode Sense: 43 00 10 08
> [ 26.114503] sd 4:0:0:3: [sdd] Write cache: enabled, read cache: enabled, supports DPO and FUA
> [ 26.123875] scsi 5:0:0:1: Direct-Access LIO-ORG san-disk-1 4.0 PQ: 0 ANSI: 5
> [ 26.123911] scsi 6:0:0:4: Direct-Access LIO-ORG san-disk-4 4.0 PQ: 0 ANSI: 5
> [ 26.124452] sd 6:0:0:4: alua: supports implicit and explicit TPGS
> [ 26.124453] sd 5:0:0:1: alua: supports implicit and explicit TPGS
> [ 26.124724] sd 5:0:0:1: alua: No target port descriptors found
> [ 26.124727] sd 5:0:0:1: alua: Attach failed (-22)
> [ 26.124728] sd 5:0:0:1: failed to add device handler: -22
> [ 26.124736] sd 6:0:0:4: [sde] 10742171648 512-byte logical blocks: (5.49 TB/5.00 TiB)
> [ 26.124773] sd 5:0:0:1: [sdf] 7812499389 512-byte logical blocks: (3.99 TB/3.63 TiB)
> [ 26.124777] sd 6:0:0:4: alua: No target port descriptors found
> [ 26.124779] sd 6:0:0:4: alua: Attach failed (-22)
> [ 26.124780] sd 6:0:0:4: failed to add device handler: -22
> [ 26.125182] sd 5:0:0:1: [sdf] Write Protect is off
> [ 26.125184] sd 5:0:0:1: [sdf] Mode Sense: 43 00 10 08
> [ 26.125217] sd 6:0:0:4: [sde] Write Protect is off
> [ 26.125220] sd 6:0:0:4: [sde] Mode Sense: 43 00 10 08
> [ 26.125306] sd 5:0:0:1: [sdf] Write cache: enabled, read cache: enabled, supports DPO and FUA
> [ 26.125512] sd 6:0:0:4: [sde] Write cache: enabled, read cache: enabled, supports DPO and FUA
> [ 26.129633] sdf: sdf1
> [ 26.130637] sd 5:0:0:1: [sdf] Attached SCSI disk
> [ 26.144377] ixgbe 0000:04:00.0: registered PHC device on enp4s0f0
> [ 26.149072] sdc: sdc1
> [ 26.150434] sd 3:0:0:2: [sdc] Attached SCSI disk
> [ 26.190709] sdd: sdd1 sdd2
> [ 26.193348] sd 4:0:0:3: [sdd] Attached SCSI disk
> [ 26.230515] sde: sde1
> [ 26.231674] sd 6:0:0:4: [sde] Attached SCSI disk
> [ 26.231987] sd 6:0:0:4: [sde] Synchronizing SCSI cache
> [ 26.232021] sd 5:0:0:1: [sdf] Synchronizing SCSI cache
> [ 26.233212] sd 3:0:0:2: [sdc] Synchronizing SCSI cache
> [ 26.233440] sd 4:0:0:3: [sdd] Synchronizing SCSI cache
> [ 26.236755] Buffer I/O error on dev sdc, logical block 2563476132, async page read
> [ 26.238897] Buffer I/O error on dev sdd, logical block 1220703182, async page read
> [ 26.245773] ixgbe 0000:04:00.1: SR-IOV enabled with 8 VFs
> [ 26.245775] ixgbe 0000:04:00.1: configure port vlans to keep your VFs secure
> [ 26.274544] scsi 6:0:0:0: Unexpected response from lun 4 while scanning, scan aborted
> [ 26.283173] scsi 3:0:0:0: Unexpected response from lun 2 while scanning, scan aborted
> [ 26.288571] scsi 4:0:0:0: Unexpected response from lun 3 while scanning, scan aborted
> [ 26.288618] scsi 5:0:0:0: Unexpected response from lun 1 while scanning, scan aborted
>
>
> Second traceback is gone too, but still no luck attaching local iscsi targets either.
>
>
> [ 639.148875] TARGET_CORE[iSCSI]: Expected Transfer Length: 264 does
> not match SCSI CDB Length: 8 for SAM Opcode: 0x12 [ 639.148911] sd
> 7:0:0:0: [sdc] 115343360 512-byte logical blocks: (59.0 GB/55.0 GiB) [
> 639.148925] sd 7:0:0:0: alua: No target port descriptors found [
> 639.148928] sd 7:0:0:0: alua: Attach failed (-22) [ 639.149186] sd
> 7:0:0:0: [sdc] Write Protect is off [ 639.149188] sd 7:0:0:0: [sdc]
> Mode Sense: 43 00 10 08 [ 639.149279] sd 7:0:0:0: [sdc] Write cache:
> enabled, read cache: enabled, supports DPO and FUA [ 639.149298] iSCSI/iqn.1994-05.com.redhat:cf7f1fafca4b: Unsupported SCSI Opcode 0xa3, sending CHECK_CONDITION.
> [ 639.149530] sd 7:0:0:0: failed to add device handler: -22 [
> 639.154762] sd 7:0:0:0: [sdc] Attached SCSI disk [ 639.154857] sd
> 7:0:0:0: [sdc] Synchronizing SCSI cache
> [ 655.279047] scsi 7:0:0:0: Direct-Access LIO-ORG IBLOCK 4.0 PQ: 0 ANSI: 5
> [ 655.279397] sd 7:0:0:0: alua: supports implicit and explicit TPGS [
> 655.279503] TARGET_CORE[iSCSI]: Expected Transfer Length: 264 does not
> match SCSI CDB Length: 8 for SAM Opcode: 0x12 [ 655.279533] sd
> 7:0:0:0: alua: No target port descriptors found [ 655.279535] sd
> 7:0:0:0: alua: Attach failed (-22) [ 655.279587] sd 7:0:0:0: [sdc]
> 115343360 512-byte logical blocks: (59.0 GB/55.0 GiB) [ 655.279848]
> sd 7:0:0:0: [sdc] Write Protect is off [ 655.279849] sd 7:0:0:0:
> [sdc] Mode Sense: 43 00 10 08 [ 655.279981] sd 7:0:0:0: [sdc] Write
> cache: enabled, read cache: enabled, supports DPO and FUA [ 655.280034] iSCSI/iqn.1994-05.com.redhat:cf7f1fafca4b: Unsupported SCSI Opcode 0xa3, sending CHECK_CONDITION.
> [ 655.280171] sd 7:0:0:0: failed to add device handler: -22 [
> 655.286008] sd 7:0:0:0: [sdc] Attached SCSI disk [ 655.286132] sd
> 7:0:0:0: [sdc] Synchronizing SCSI cache
>
>
> Serguei Bezverkhi,
> TECHNICAL LEADER.SERVICES
> Global SP Services
> sbezverk@cisco.com
> Phone: +1 416 306 7312
> Mobile: +1 514 234 7374
>
> CCIE (R&S,SP,Sec) - #9527
>
> Cisco.com
>
>
>
> Think before you print.
> This email may contain confidential and privileged material for the sole use of the intended recipient. Any review, use, distribution or disclosure by others is strictly prohibited. If you are not the intended recipient (or authorized to receive for the recipient), please contact the sender by reply email and delete all copies of this message.
> Please click here for Company Registration Information.
>
>
>
>
> -----Original Message-----
> From: Mike Christie [mailto:michaelc@cs.wisc.edu]
> Sent: Friday, January 29, 2016 2:27 PM
> To: Serguei Bezverkhi (sbezverk) <sbezverk@cisco.com>
> Cc: bugzilla-daemon@bugzilla.kernel.org; linux-scsi@vger.kernel.org
> Subject: Re: [Bug 111441] New: iscsi fails to attach to targets
>
>
>
> On 01/29/2016 01:11 PM, Serguei Bezverkhi (sbezverk) wrote:
>> If you send me the diff for your patch, I will build new kernel myself.
>>
>
> Bugzilla must be messing something up. I attached to one of the previous mails. Attaching it here again.
>
> Email me offlist and without bugzilla if you do not get it here.
>
> The patch will fix the syfs bug ons you are hitting.
>
> I am not sure if it will fix the genhd one. We can deal with that one next if it is a different issue.
>
>
>> Serguei
>>
>>
>> Serguei Bezverkhi,
>> TECHNICAL LEADER.SERVICES
>> Global SP Services
>> sbezverk@cisco.com
>> Phone: +1 416 306 7312
>> Mobile: +1 514 234 7374
>>
>> CCIE (R&S,SP,Sec) - #9527
>>
>> Cisco.com
>>
>>
>>
>> Think before you print.
>> This email may contain confidential and privileged material for the sole use of the intended recipient. Any review, use, distribution or disclosure by others is strictly prohibited. If you are not the intended recipient (or authorized to receive for the recipient), please contact the sender by reply email and delete all copies of this message.
>> Please click here for Company Registration Information.
>>
>>
>>
>>
>> -----Original Message-----
>> From: Michael Christie [mailto:michaelc@cs.wisc.edu]
>> Sent: Friday, January 29, 2016 2:09 PM
>> To: Serguei Bezverkhi (sbezverk) <sbezverk@cisco.com>
>> Cc: bugzilla-daemon@bugzilla.kernel.org; linux-scsi@vger.kernel.org
>> Subject: Re: [Bug 111441] New: iscsi fails to attach to targets
>>
>>
>>> On Jan 29, 2016, at 6:04 AM, Serguei Bezverkhi (sbezverk) <sbezverk@cisco.com> wrote:
>>>
>>> Actually this server uses both cases: Local taregts (since it is OpenStack server) and remote targets as it tries to mount 4 remotefile systems.
>>>
>>> You are correct, I always use the same box I just change the kernel it is using to boot. No other changes to the environment. I do not mind to load a test kernel without that suspected patch, just get me the RPM.
>>>
>>
>> I do not know what you mean. I think the patch I sent will fix the sysfs errors caused due to alua not being setup properly on your system and scsi_dh_alua failing to attach. That patch should be applied to the 4.4 upstream kernel. Are you saying you want me to make you a kernel rpm?
>> --
>> To unsubscribe from this list: send the line "unsubscribe linux-scsi"
>> in the body of a message to majordomo@vger.kernel.org More majordomo
>> info at http://vger.kernel.org/majordomo-info.html
>>
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-scsi"
> in the body of a message to majordomo@vger.kernel.org More majordomo
> info at http://vger.kernel.org/majordomo-info.html
>
--
You are receiving this mail because:
You are the assignee for the bug.--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 46+ messages in thread* [Bug 111441] iscsi fails to attach to targets
2016-01-28 22:51 [Bug 111441] New: iscsi fails to attach to targets bugzilla-daemon
` (16 preceding siblings ...)
2016-02-22 0:45 ` bugzilla-daemon
@ 2016-02-22 7:08 ` bugzilla-daemon
2016-02-22 11:36 ` bugzilla-daemon
2016-02-27 22:15 ` bugzilla-daemon
19 siblings, 0 replies; 46+ messages in thread
From: bugzilla-daemon @ 2016-02-22 7:08 UTC (permalink / raw)
To: linux-scsi
https://bugzilla.kernel.org/show_bug.cgi?id=111441
--- Comment #17 from Hannes Reinecke <hare@suse.de> ---
On 02/22/2016 01:45 AM, Serguei Bezverkhi (sbezverk) wrote:
> Hi Mike,
>
> I just wanted to follow up with you to see if the patch got committed to an upstream kernel if yes, please let me into which version it went.
>
> Thank you
>
> Serguei
>
>
> Serguei Bezverkhi,
> TECHNICAL LEADER.SERVICES
> Global SP Services
> sbezverk@cisco.com
> Phone: +1 416 306 7312
> Mobile: +1 514 234 7374
>
> CCIE (R&S,SP,Sec) - #9527
>
> Cisco.com
>
>
>
> Think before you print.
> This email may contain confidential and privileged material for the sole use of the intended recipient. Any review, use, distribution or disclosure by others is strictly prohibited. If you are not the intended recipient (or authorized to receive for the recipient), please contact the sender by reply email and delete all copies of this message.
> Please click here for Company Registration Information.
>
>
>
> -----Original Message-----
> From: Mike Christie [mailto:michaelc@cs.wisc.edu]
> Sent: Friday, January 29, 2016 6:33 PM
> To: Serguei Bezverkhi (sbezverk) <sbezverk@cisco.com>
> Cc: bugzilla-daemon@bugzilla.kernel.org; linux-scsi@vger.kernel.org; Christoph Hellwig <hch@infradead.org>; Hannes Reinecke <hare@suse.de>
> Subject: Re: [Bug 111441] New: iscsi fails to attach to targets
>
> On 01/29/2016 04:21 PM, Serguei Bezverkhi (sbezverk) wrote:
>> HI Mike,
>>
>> I tried your patch and it is has eliminated first traceback but I still do not see my remote targets.
>>
>
> That is sort of expected. Your target is not setup for ALUA properly. It says it supports ALUA, but when scsi_dh_alua asks about the ports it is reporting there are none. Ccing the people that made the patch that added the issue and own the code.
>
> Hey Christoph and Hannes,
>
> The dh/alua changes that added this:
>
> error = scsi_dh_add_device(sdev);
> if (error) {
> sdev_printk(KERN_INFO, sdev,
> "failed to add device handler: %d\n", error);
> return error;
> }
>
> to scsi_sysfs_add_sdev are adding a regression.
>
> 1. If that fails, then we forget to do device_del before doing the return. My patch in this thread added that back, so we do not see the sysfs oopses anymore. But.....
>
> 2. It looks like in older kernels, we would allow misconfigured targets like this one to still setup devices. Do we want that old behavior back?
> Should we just ignore the return value from scsi_dh_add_device above?
> Note that in this case, it is LIO so it can be easily fixed on the target side by just setting it up properly. I do not think other targets would hit this type of issue.
>
>
This has been fixed up with my patchset to update the ALUA handler, most
notably the commit 'scsi: ignore errors from scsi_dh_add_device()' which
was included in 4.5.
Cheers,
Hannes
--
You are receiving this mail because:
You are the assignee for the bug.
^ permalink raw reply [flat|nested] 46+ messages in thread* [Bug 111441] iscsi fails to attach to targets
2016-01-28 22:51 [Bug 111441] New: iscsi fails to attach to targets bugzilla-daemon
` (17 preceding siblings ...)
2016-02-22 7:08 ` bugzilla-daemon
@ 2016-02-22 11:36 ` bugzilla-daemon
2016-02-27 22:15 ` bugzilla-daemon
19 siblings, 0 replies; 46+ messages in thread
From: bugzilla-daemon @ 2016-02-22 11:36 UTC (permalink / raw)
To: linux-scsi
https://bugzilla.kernel.org/show_bug.cgi?id=111441
--- Comment #18 from Serguei Bezverkhi <sbezverk@cisco.com> ---
Hello Hannes,
Thank you for your reply. I am on 4.4.2 kernel, is there any chance to commit
it in 4.4 as well? If not, could you send me diff for 4.4 kernel.
Best regards
Serguei
Serguei Bezverkhi,
TECHNICAL LEADER.SERVICES
Global SP Services
sbezverk@cisco.com
Phone: +1 416 306 7312
Mobile: +1 514 234 7374
CCIE (R&S,SP,Sec) - #9527
Cisco.com
Think before you print.
This email may contain confidential and privileged material for the sole use of
the intended recipient. Any review, use, distribution or disclosure by others
is strictly prohibited. If you are not the intended recipient (or authorized to
receive for the recipient), please contact the sender by reply email and delete
all copies of this message.
Please click here for Company Registration Information.
-----Original Message-----
From: Hannes Reinecke [mailto:hare@suse.de]
Sent: Monday, February 22, 2016 2:08 AM
To: Serguei Bezverkhi (sbezverk) <sbezverk@cisco.com>; Mike Christie
<michaelc@cs.wisc.edu>
Cc: bugzilla-daemon@bugzilla.kernel.org; linux-scsi@vger.kernel.org; Christoph
Hellwig <hch@infradead.org>
Subject: Re: [Bug 111441] New: iscsi fails to attach to targets
On 02/22/2016 01:45 AM, Serguei Bezverkhi (sbezverk) wrote:
> Hi Mike,
>
> I just wanted to follow up with you to see if the patch got committed to an upstream kernel if yes, please let me into which version it went.
>
> Thank you
>
> Serguei
>
>
> Serguei Bezverkhi,
> TECHNICAL LEADER.SERVICES
> Global SP Services
> sbezverk@cisco.com
> Phone: +1 416 306 7312
> Mobile: +1 514 234 7374
>
> CCIE (R&S,SP,Sec) - #9527
>
> Cisco.com
>
>
>
> Think before you print.
> This email may contain confidential and privileged material for the sole use of the intended recipient. Any review, use, distribution or disclosure by others is strictly prohibited. If you are not the intended recipient (or authorized to receive for the recipient), please contact the sender by reply email and delete all copies of this message.
> Please click here for Company Registration Information.
>
>
>
> -----Original Message-----
> From: Mike Christie [mailto:michaelc@cs.wisc.edu]
> Sent: Friday, January 29, 2016 6:33 PM
> To: Serguei Bezverkhi (sbezverk) <sbezverk@cisco.com>
> Cc: bugzilla-daemon@bugzilla.kernel.org; linux-scsi@vger.kernel.org;
> Christoph Hellwig <hch@infradead.org>; Hannes Reinecke <hare@suse.de>
> Subject: Re: [Bug 111441] New: iscsi fails to attach to targets
>
> On 01/29/2016 04:21 PM, Serguei Bezverkhi (sbezverk) wrote:
>> HI Mike,
>>
>> I tried your patch and it is has eliminated first traceback but I still do not see my remote targets.
>>
>
> That is sort of expected. Your target is not setup for ALUA properly. It says it supports ALUA, but when scsi_dh_alua asks about the ports it is reporting there are none. Ccing the people that made the patch that added the issue and own the code.
>
> Hey Christoph and Hannes,
>
> The dh/alua changes that added this:
>
> error = scsi_dh_add_device(sdev);
> if (error) {
> sdev_printk(KERN_INFO, sdev,
> "failed to add device handler: %d\n", error);
> return error;
> }
>
> to scsi_sysfs_add_sdev are adding a regression.
>
> 1. If that fails, then we forget to do device_del before doing the return. My patch in this thread added that back, so we do not see the sysfs oopses anymore. But.....
>
> 2. It looks like in older kernels, we would allow misconfigured targets like this one to still setup devices. Do we want that old behavior back?
> Should we just ignore the return value from scsi_dh_add_device above?
> Note that in this case, it is LIO so it can be easily fixed on the target side by just setting it up properly. I do not think other targets would hit this type of issue.
>
>
This has been fixed up with my patchset to update the ALUA handler, most
notably the commit 'scsi: ignore errors from scsi_dh_add_device()' which was
included in 4.5.
Cheers,
Hannes
--
You are receiving this mail because:
You are the assignee for the bug.--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 46+ messages in thread* [Bug 111441] iscsi fails to attach to targets
2016-01-28 22:51 [Bug 111441] New: iscsi fails to attach to targets bugzilla-daemon
` (18 preceding siblings ...)
2016-02-22 11:36 ` bugzilla-daemon
@ 2016-02-27 22:15 ` bugzilla-daemon
19 siblings, 0 replies; 46+ messages in thread
From: bugzilla-daemon @ 2016-02-27 22:15 UTC (permalink / raw)
To: linux-scsi
https://bugzilla.kernel.org/show_bug.cgi?id=111441
--- Comment #19 from nab <nab@linux-iscsi.org> ---
Hey Hannes,
On Tue, 2016-02-16 at 20:08 +0100, Hannes Reinecke wrote:
> On 02/08/2016 09:01 AM, Nicholas A. Bellinger wrote:
> > On Tue, 2016-02-02 at 14:56 -0800, Nicholas A. Bellinger wrote:
> >> On Mon, 2016-02-01 at 10:55 -0600, Mike Christie wrote:
> >>> On 01/30/2016 01:38 AM, Nicholas A. Bellinger wrote:
> >>>> On Fri, 2016-01-29 at 17:32 -0600, Mike Christie wrote:
<SNIP>
> >>>> Btw, what does misconfigured mean here wrt target ALUA..?
> >>>
> >>> [ 25.833195] sd 6:0:0:4: alua: supports implicit and explicit TPGS
> >>> [ 25.833360] sd 6:0:0:4: alua: No target port descriptors found
> >>> [ 25.833363] sd 6:0:0:4: alua: Attach failed (-22)
> >>> [ 25.833365] sd 6:0:0:4: failed to add device handler: -22
> >>>
> >>
> >> Strange, this hasn't changed in forever on the target side..
> >>
> >>> He has LIO configured to report it supports implicit/explicit ALUA, but
> >>> the ports do not seem to be configured.
> >>>
> >>> For the LIO config side, are his LUNs just not in a the default_lu_gp or
> >>> any other group?
> >>
> >> So every non-PSCSI backend device becomes part of default_lu_gp +
> >> default_tg_pt_gp and automatically shows up in EVPD=0x83, without user
> >> needing to do any additional configuration.
> >>
> >> Here's what the output looks like:
> >>
> >> root@haakon3:/usr/src/target-pending.git# sg_inq -Hi /dev/sdb
> >> VPD INQUIRY: Device Identification page
> >> <SNIP>
> >> Designation descriptor number 3, descriptor length: 8
> >> transport: Serial Attached SCSI Protocol (SPL-2)
> >> designator_type: Relative target port, code_set: Binary
> >> associated with the target port
> >> designator header(hex): 61 94 00 04
> >> designator:
> >> 00 00 00 00 02 ....
> >> Designation descriptor number 4, descriptor length: 8
> >> transport: Serial Attached SCSI Protocol (SPL-2)
> >> designator_type: Target port group, code_set: Binary
> >> associated with the target port
> >> designator header(hex): 61 95 00 04
> >> designator:
> >> 00 00 00 00 00 ....
> >> Designation descriptor number 5, descriptor length: 8
> >> designator_type: Logical unit group, code_set: Binary
> >> associated with the addressed logical unit
> >> designator header(hex): 01 06 00 04
> >> designator:
> >> 00 00 00 00 00 ....
> >> <SNIP>
> >>
> >> So AFAICT, the relative target port, target port group, and logical unit
> >> group being returned from target on v4.5-rc1 code looks correct.
> >>
> >> Serguei, can you confirm with 'sg_inq -Hi /dev/sdX' output on your side
> >> with the v3.10 based target..?
> >>
> >> AFAICT the parsing in scsi_vpd_tpg_id() from commit a8aa3978 looks
> >> correct too.
> >>
> >> Hannes, any ideas..?
> >
> > Ping.
> >
> Please try with my latest scsi_dh_alua patchset posted to linux-scsi.
> That should solve the error attaching devices.
>
Just to confirm, this was not a target side issue, right..?
Also, since Serguei is seeing this on v4.4 we'll still need some hack
for stable, assuming you're entire patchset won't be in 4.4.y code. ;)
Are you OK with Mike's original patch, or do you have something better
to submit to Greg-KH..?
--
You are receiving this mail because:
You are the assignee for the bug.
^ permalink raw reply [flat|nested] 46+ messages in thread