From: bugme-daemon@bugzilla.kernel.org
To: linux-scsi@vger.kernel.org
Subject: [Bug 11529] New: aacraid - WARNING: at lib/scatterlist.c
Date: Wed, 10 Sep 2008 01:07:50 -0700 (PDT) [thread overview]
Message-ID: <bug-11529-11613@http.bugzilla.kernel.org/> (raw)
http://bugzilla.kernel.org/show_bug.cgi?id=11529
Summary: aacraid - WARNING: at lib/scatterlist.c
Product: SCSI Drivers
Version: 2.5
KernelVersion: 2.6.26.5
Platform: All
OS/Version: Linux
Tree: Mainline
Status: NEW
Severity: normal
Priority: P1
Component: AACRAID
AssignedTo: scsi_drivers-aacraid@kernel-bugs.osdl.org
ReportedBy: winfried@tilanus.com
Latest working kernel version: 2.6.25.17
Earliest failing kernel version: 2.6.26
Distribution: Debian
Hardware Environment: Intel 686
Problem Description:
During boot I see 16 warnings about scatterlist.c, right after the
initiantion of aacraid (Using a Adeptec AAR-2410SA raid card). Boot
seems to proceed normally. After the boot I don't see these messages
anymore:
[ 5.640780] AAC0: kernel 4.2-0[8205] Aug 17 2005
[ 5.640780] AAC0: monitor 4.2-0[8205]
[ 5.640780] AAC0: bios 4.2-0[8205]
[ 5.640780] AAC0: serial C92A77
[ 5.640781] scsi2 : aacraid
[ 5.641921] ------------[ cut here ]------------
[ 5.641924] WARNING: at lib/scatterlist.c:316 sg_copy_buffer+0x2e/0x14f()
[ 5.641926] Modules linked in: pata_marvell(+) ata_piix(+) ohci1394(+)
libata ieee1394 aacraid scsi_mod dock ehci_hcd uhci_hcd usbcore e1000e thermal
processor fan thermal_sys
[ 5.641940] Pid: 900, comm: modprobe Not tainted 2.6.26.5-pristine #1
[ 5.641942] [<c01237c0>] warn_on_slowpath+0x40/0x79
[ 5.641948] [<c017ee31>] do_lookup+0x53/0x153
[ 5.641952] [<c0115c45>] do_page_fault+0x0/0x7e7
[ 5.641956] [<c02c00fa>] error_code+0x72/0x78
[ 5.641960] [<c0118bfb>] kmap_atomic_prot+0xc9/0xff
[ 5.641963] [<c0118c42>] kmap_atomic+0x11/0x14
[ 5.641966] [<c0118b17>] kunmap_atomic+0x4b/0x66
[ 5.641969] [<c0158acf>] file_read_actor+0x75/0xc5
[ 5.641973] [<c01275a6>] current_fs_time+0x13/0x15
[ 5.641976] [<c018bfa6>] mnt_drop_write+0x1a/0xb4
[ 5.641979] [<c015ad90>] generic_file_aio_read+0x492/0x512
[ 5.641984] [<c01e9462>] sg_copy_buffer+0x2e/0x14f
[ 5.641987] [<c0178b34>] do_sync_read+0xc0/0x107
[ 5.641991] [<c01e958e>] sg_copy_to_buffer+0xb/0xe
[ 5.641994] [<f8b98449>] get_container_name_callback+0xa2/0xf8 [aacraid]
[ 5.642004] [<c016a7a0>] mmap_region+0x38d/0x45b
[ 5.642007] [<c013364e>] autoremove_wake_function+0x0/0x2d
[ 5.642012] [<f8b9dd06>] aac_intr_normal+0x166/0x1a2 [aacraid]
[ 5.642021] [<f8b9e943>] aac_rx_intr_message+0x25/0x55 [aacraid]
[ 5.642030] [<c01545a7>] handle_IRQ_event+0x23/0x51
[ 5.642034] [<c01553b2>] handle_fasteoi_irq+0x71/0xa4
[ 5.642037] [<c0105f8b>] do_IRQ+0x4d/0x66
[ 5.642040] [<c010434b>] common_interrupt+0x23/0x28
[ 5.642044] =======================
[ 5.642046] ---[ end trace bbed9608e04f0ab9 ]---
The Adaptec card is an AAR-2410SA, a PCI SATA RAID card. lspci -vvv reports on
it:
04:00.0 RAID bus controller: Adaptec AAC-RAID (rev 01)
Subsystem: Adaptec Device 0290
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=slow >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 32 (250ns min, 250ns max), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 21
Region 0: Memory at e0000000 (32-bit, prefetchable) [size=64M]
Expansion ROM at e7008000 [disabled] [size=32K]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: aacraid
Kernel modules: aacraid
Further info: Intel Core 2 Quad, 4 GB ram. Kernel compiled with a slightly
modified config taken from debians 686-bigmem kernel.
--
Configure bugmail: http://bugzilla.kernel.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the assignee for the bug, or are watching the assignee.
next reply other threads:[~2008-09-10 8:08 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-09-10 8:07 bugme-daemon [this message]
2008-09-10 9:01 ` [Bug 11529] New: aacraid - WARNING: at lib/scatterlist.c FUJITA Tomonori
2008-09-10 9:01 ` [Bug 11529] " bugme-daemon
2008-09-10 12:44 ` bugme-daemon
2008-09-10 14:13 ` FUJITA Tomonori
2008-09-10 14:13 ` bugme-daemon
2008-09-10 17:35 ` bugme-daemon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=bug-11529-11613@http.bugzilla.kernel.org/ \
--to=bugme-daemon@bugzilla.kernel.org \
--cc=linux-scsi@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox