[Bug 15503] New: insmod: error inserting '/lib/aic7xxx.ko': -1 Invalid modulkjournald starting

[Bug 15503] New: insmod: error inserting '/lib/aic7xxx.ko': -1 Invalid modulkjournald starting

[bugzilla-daemon]

http://bugzilla.kernel.org/show_bug.cgi?id=15503

           Summary: insmod: error inserting '/lib/aic7xxx.ko': -1 Invalid
                    modulkjournald starting
           Product: SCSI Drivers
           Version: 2.5
    Kernel Version: linux-2.6.33-git15
          Platform: All
        OS/Version: Linux
              Tree: Mainline
            Status: NEW
          Severity: high
          Priority: P1
         Component: Other
        AssignedTo: scsi_drivers-other@kernel-bugs.osdl.org
        ReportedBy: wlgivens@gmail.com
        Regression: No


Compiling and installing kernel... error below is what I received on restart:

[root@jericho ~]# cat /etc/aboot.conf
# aboot default configurations
# NOTICE: You have a /boot partition. This means that
#         all kernel paths are relative to /boot/
0:1/vmlinuz-2.6.17-1.2187_FC5.6axp initrd=/initrd-2.6.17-1.2187_FC5.6axp.img
root=/dev/VolGroup00/LogVol00 selinux=off console=ttyS0
1:1/linux-2.6/vmlinuz-2.6.33-git15 initrd=/initrd-2.6.17-1.2187_FC5.6axp.img
root=/dev/VolGroup00/LogVol00 selinux=off console=ttyS0

Configured with: ../gcc-4.4.2/configure --build=alpha-alpha-linux
--host=alpha-alpha-linux --prefix=/usr --mandir=/usr/share/man
--infodir=/usr/share/info --enable-shared --enable-threads=posix
--enable-checking=release --with-system-zlib --enable-__cxa_atexit
--disable-libunwind-exceptions --enable-libgcj-multifile
--enable-languages=c,c++,objc,obj-c++,java,fortran --disable-dssi
--with-java-home=/usr/lib/jvm/java-1.4.2-gcj-1.4.2.0/jre --with-long-double-128
Thread model: posix
gcc version 4.4.2 (GCC)


[root@jericho ~]# cat /proc/cpuinfo
cpu                     : Alpha
cpu model               : EV68AL
cpu variation           : 7
cpu revision            : 0
cpu serial number       :
system type             : Nautilus
system variation        : 0
system revision         : 0
system serial number    :
cycle frequency [Hz]    : 796418537 est.
timer frequency [Hz]    : 1024.00
page size [bytes]       : 8192
phys. address bits      : 44
max. addr. space #      : 255
BogoMIPS                : 1586.36
kernel unaligned acc    : 0 (pc=0,va=0)
user unaligned acc      : 0 (pc=0,va=0)
platform string         : UP1500 796 MHz
cpus detected           : 1
L1 Icache               : 64K, 2-way, 64b line
L1 Dcache               : 64K, 2-way, 64b line
L2 cache                : 8192K, 1-way, 64b line
L3 cache                : n/a


0000-0xe5ffffff]
pci 0000:01:05.0: BAR 6: assigned [mem 0xe8000000-0xe801ffff pref]
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0:   bridge window [io  disabled]
pci 0000:00:01.0:   bridge window [mem 0xe4000000-0xe5ffffff]
pci 0000:00:01.0:   bridge window [mem 0xe8000000-0xffffffff pref]
bio: create slab <bio-0> at 0
vgaarb: device added: PCI:0000:01:05.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
raid6: int64x1    852 MB/s
raid6: int64x2   1084 MB/s
raid6: int64x4   1100 MB/s
raid6: int64x8    640 MB/s
raid6: using algorithm int64x4 (1100 MB/s)
Switching to clocksource jiffies
NET: Registered protocol family 2
IP route cache hash table entries: 65536 (order: 6, 524288 bytes)
TCP established hash table entries: 262144 (order: 9, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 6, 524288 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
UDP hash table entries: 1024 (order: 2, 32768 bytes)
UDP-Lite hash table entries: 1024 (order: 2, 32768 bytes)
NET: Registered protocol family 1
pci 0000:00:07.0: Activating ISA DMA hang workarounds
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 2295k freed
srm_env: version 0.0.6 loaded successfully
audit: initializing netlink socket (disabled)
type=2000 audit(1268198602.219:1): initialized
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 8192 bytes)
msgmni has been set to 4043
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci-stub: invalid id string ""
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Linux agpgart interface v0.103
[drm] Initialized drm 1.1.0 20060810
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
ÿserial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
brd: module loaded
nbd: registered device at major 43
Uniform Multi-Platform E-IDE driver
alim15x3 0000:00:10.0: IDE controller (0x10b9:0x5229 rev 0xc4)
alim15x3 0000:00:10.0: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0x8c80-0x8c87
    ide1: BM-DMA at 0x8c88-0x8c8f
ide0: not ready before the probe
ide1: no devices on the port
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
ide_generic: please use "probe_mask=0x3f" module parameter for probing all
legacy ISA IDE ports
ide-gd driver 1.18
ide-cd driver 5.00
(scsi0) <Adaptec AIC-7892 Ultra 160/m SCSI host adapter> found at PCI 0/9/0
(scsi0) Wide Channel, SCSI ID=7, 32/255 SCBs
(scsi0) Downloading sequencer code... 396 instructions downloaded
scsi0 : Adaptec AHA274x/284x/294x (EISA/VLB/PCI-Fast SCSI) 5.2.6/5.2.0
       <Adaptec AIC-7892 Ultra 160/m SCSI host adapter>
aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded
0000:00:0b.0: DE500-BA at 0x8c00, h/w address 00:00:f0:51:19:de
      and requires IRQ11 (provided by PCI BIOS).
de4x5.c:V0.546 2001/02/22 davies@maniac.ultranet.com
usbmon: debugfs is not available
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
cm109: Keymap for Komunikate KIP1000 phone loaded
atkbd.c: keyboard reset failed on isa0060/serio0
usbcore: registered new interface driver cm109
cm109: CM109 phone driver: 20080805 (C) Alfred E. Heggestad
md: raid0 personality registered for level 0
md: raid1 personality registered for level 1
md: raid10 personality registered for level 10
md: raid6 personality registered for level 6
md: raid5 personality registered for level 5
md: raid4 personality registered for level 4
md: multipath personality registered for level -4
device-mapper: ioctl: 4.16.0-ioctl (2009-11-05) initialised:
dm-devel@redhat.com
atkbd.c: keyboard reset failed on isa0060/serio1
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
TCP bic registered
TCP cubic registered
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
register_blkdev: cannot get major 3 for hd
scsi: waiting for bus probes to complete ...
scsi 0:0:1:0: Direct-Access     ModusLnk                       PQ: 0 ANSI: 3
sd 0:0:1:0: Attached scsi generic sg0 type 0
drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
(scsi0:0:1:0) Synchronous at 160.0 Mbyte/sec, offset 127.
sd 0:0:1:0: [sda] 143638992 512-byte logical blocks: (73.5 GB/68.4 GiB)
sd 0:0:1:0: [sda] Write Protect is off
sd 0:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support
DPO or FUA
 sda: sda1 sda2
sd 0:0:1:0: [sda] Attached SCSI disk
Freeing unused kernel memory: 216k freed
Red Hat nash version 5.0.32 starting
Mounting proc filesystem
Mounting sysfs filesystem
Creating /dev
Creating initial device nodes
Setting up hotplug.
Creating block device nodes.
Loading scsi_modscsi_mod: no symbol version for module_layout
.ko module
sd_mod: no symbol version for module_layout
insmod: error inscsi_transport_spi: no symbol version for module_layout
serting '/lib/scaic7xxx: no symbol version for module_layout
si_mod.ko': -1 Ijbd: no symbol version for module_layout
nvalid module foext3: no symbol version for module_layout
rmat
Loading sddm_mod: no symbol version for module_layout
_mod.ko module
dm_mirror: no symbol version for module_layout
insmod: error indm_zero: no symbol version for module_layout
serting '/lib/sddm_snapshot: no symbol version for module_layout
_mod.ko': -1 Invalid module format
Loading scsi_transport_spi.ko module
insmod: error inserting '/lib/scsi_transport_spi.ko': -1 Invalid module format
Loading aic7xxx.ko module
insmod: error inserting '/lib/aic7xxx.ko': -1 Invalid modulkjournald starting. 
Commit interval 5 seconds
e format
mounted filesystem with writeback data mode
                                           insmod: error i
nserting '/lib/jbd.ko': -1 Invalid module format
Loading ext3.kUnable to handle kernel paging request at virtual address
0000000000000000
o module
insmodinit(1): Oops 0
: error insertinpc = [<fffffc00003cfd08>]  ra = [<fffffc00003cbc84>]  ps = 0000
   Not tainted
g '/lib/ext3.ko'v0 = 0000000000000007  t0 = 0000000000000001  t1 =
fffffc007f0e91e8
: -1 Invalid modt2 = 0000000000000001  t3 = 0000000000000000  t4 =
0000000000000000
ule format
Loadt5 = 0000000000000001  t6 = 0000000000000002  t7 = fffffc007f044000
ing dm-mod.ko mos0 = fffffc007f0e91c8  s1 = fffffc007f0e9180  s2 =
0000000000000001
dule
insmod: ers3 = fffffc007f0e9180  s4 = fffffc007f0e9180  s5 = 000000000000000c
ror inserting '/s6 = 0000000000000002
lib/dm-mod.ko': a0 = 0000000000000000  a1 = 0000000000000000  a2 =
0000000000000001
-1 Invalid modula3 = 0000000000000000  a4 = 0000000000000000  a5 =
0000000000000400
e format
Loadint8 = 0000000000000001  t9 = 0000000000000001  t10= fffffc007e84c030
g dm-mirror.ko mt11= fffffc007e443c50  pv = fffffc00003cfcac  at =
0000000000200200
odule
insmod: egp = fffffc0000982fa0  sp = fffffc007f0477f8
rror inserting 'Disabling lock debugging due to kernel taint
/lib/dm-mirror.kTrace:
o': -1 Invalid m[<fffffc00003cbc84>]odule format
Lo
ading dm-zero.ko[<fffffc000067e6ec>] module
insmod:
 error inserting[<fffffc000067f268>] '/lib/dm-zero.k
o': -1 Invalid m[<fffffc000067f650>]odule format
Lo
ading dm-snapsho[<fffffc0000360000>]t.ko module
ins
mod: error inser[<fffffc000067f374>]ting '/lib/dm-sn
apshot.ko': -1 I[<fffffc000067f474>]nvalid module fo
rmat
Making dev[<fffffc00004e1e04>]ice-mapper contr
ol node
Scannin[<fffffc00004e1fdc>]g logical volume
s
  Reading all[<fffffc00003cfe8c>] physical volume
s.  This may tak[<fffffc00003d03c8>]e a while...

Found volume gro[<fffffc00003d0628>]up "VolGroup00"
using metadata t[<fffffc000044da80>]ype lvm2
Activa
ting logical vol[<fffffc00004f6eec>]umes
  2 logica
l volume(s) in v[<fffffc000036b2e8>]olume group "Vol
Group00" now act[<fffffc000044da80>]ive
Creating ro
ot device.
Moun[<fffffc000044b350>]ting root filesy
stem.
Setting u[<fffffc000045d008>]p other filesyst
ems.
Setting up[<fffffc0000374958>] new root fs
no
 fstab.sys, moun[<fffffc0000374b8c>]ting internal de
faults
Switchin[<fffffc000036c604>]g to new root an
[<fffffc000039caf4>]
                    unmounting old
/dev
unmounting[<fffffc000039cc00>] old /proc
unmo
[<fffffc000039c9bc>]

[<fffffc000039cbd8>]
[<fffffc00003a292c>]
[<fffffc00003a3a64>]
[<fffffc0000312be0>]
[<fffffc0000310c14>]

Code: 2129fff0  412103a1  f4200002  a4290000  8be10000  e5600005 <a8300000>
44211401
Kernel panic - not syncing: Attempted to kill init!

-- 
Configure bugmail: http://bugzilla.kernel.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are watching the assignee of the bug.--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Bug 15503] insmod: error inserting '/lib/aic7xxx.ko': -1 Invalid modulkjournald starting

[bugzilla-daemon]

http://bugzilla.kernel.org/show_bug.cgi?id=15503





--- Comment #1 from Will L Givens <wlgivens@gmail.com>  2010-03-10 19:27:32 ---
After recompiling and rolling the dodgy drivers into the kernel... I have a NEW
error *hmmm*

1:1/linux-2.6/vmlinuz-2.6.33-git15 initrd=/initrd-2.6.17-1.2187_FC5.6axp.img
root=/dev/VolGroup00/LogVol00 selinux=off console=ttyS0
aboot> 1
aboot: loading uncompressed linux-2.6/vmlinuz-2.6.33-git15...
aboot: loading compressed linux-2.6/vmlinuz-2.6.33-git15...
aboot: zero-filling 145528 bytes at 0xfffffc0000994968
aboot: loading initrd (2350556 bytes/2295 blocks) at 0xfffffc007fb48000
aboot: starting kernel linux-2.6/vmlinuz-2.6.33-git15 with arguments 
root=/dev/VolGroup00/LogVol00 selinux=off console=ttyS0 Linux version
2.6.33-git15 (root@jericho.southkc.net) (gcc version 3.4.3) #1 Wed Mar 10
02:03:05 CST 2010 Booting on Nautilus using machine vector Nautilus from SRM
Major Options: EV67 LEGACY_START Command line:  root=/dev/VolGroup00/LogVol00
selinux=off console=ttyS0
memcluster 0, usage 1, start        0, end      256
memcluster 1, usage 0, start      256, end   130994
memcluster 2, usage 1, start   130994, end   131072
memcluster 3, usage 0, start   131072, end   262142
memcluster 4, usage 1, start   262142, end   262144
freeing pages 256:384
freeing pages 1247:130994
freeing pages 131072:262142
reserving pages 1247:1251
Initial ramdisk at: 0xfffffc007fb48000 (2350556 bytes) 8192K Bcache detected;
load hit latency 18 cycles, load miss latency 161 cycles Iron stat_cmd 22100006
Iron ECC f00 Built 1 zonelists in Zone order, mobility grouping on.  Total
pages: 260350 Kernel command line:  root=/dev/VolGroup00/LogVol00 selinux=off
console=ttyS0 PID hash table entries: 4096 (order: 2, 32768 bytes) Dentry cache
hash table entries: 262144 (order: 8, 2097152 bytes) Inode-cache hash table
entries: 131072 (order: 7, 1048576 bytes)
Memory: 2067112k/2097136k available (4644k kernel code, 26664k reserved, 354k
data, 216k init) Hierarchical RCU implementation.
NR_IRQS:16
HWRPB cycle frequency bogus.  Estimated 796433400 Hz Using epoch = 1952
Console: colour VGA+ 80x25
console [ttyS0] enabled
Calibrating delay loop... 1582.24 BogoMIPS (lpj=772096) Security Framework
initialized Mount-cache hash table entries: 512
devtmpfs: initialized
xor: automatically using best checksumming function: alpha prefetch
   alpha prefetch:  5210.112 MB/sec
xor: using function: alpha prefetch (5210.112 MB/sec)
NET: Registered protocol family 16
pci 0000:00:11.0: quirk: [io  0x4000-0x403f] claimed by ali7101 ACPI pci
0000:00:11.0: quirk: [io  0x5000-0x501f] claimed by ali7101 SMB pci
0000:00:01.0: BAR 15: assigned [mem 0xe8000000-0xffffffff pref] pci
0000:00:01.0: BAR 14: assigned [mem 0xe4000000-0xe5ffffff] pci 0000:00:0b.0:
BAR 6: assigned [mem 0xe6000000-0xe603ffff pref] pci 0000:00:09.0: BAR 6:
assigned [mem 0xe6040000-0xe605ffff pref] pci 0000:00:03.0: BAR 0: assigned
[mem 0xe6060000-0xe6060fff] pci 0000:00:03.0: BAR 0: set to [mem
0xe6060000-0xe6060fff] (PCI address [0xe6060000-0xe6060fff] pci 0000:00:06.0:
BAR 1: assigned [mem 0xe6061000-0xe6061fff] pci 0000:00:06.0: BAR 1: set to
[mem 0xe6061000-0xe6061fff] (PCI address [0xe6061000-0xe6061fff] pci
0000:00:09.0: BAR 1: assigned [mem 0xe6062000-0xe6062fff 64bit] pci
0000:00:09.0: BAR 1: set to [mem 0xe6062000-0xe6062fff 64bit] (PCI address
[0xe6062000-0xe6062fff] pci 0000:00:14.0: BAR 0: assigned [mem
0xe6063000-0xe6063fff] pci 0000:00:14.0: BAR 0: set to [mem
0xe6063000-0xe6063fff] (PCI address [0xe6063000-0xe6063fff] pci 0000:00:0b.0:
BAR 1: assigned [mem 0xe6064000-0xe60643ff] pci 0000:00:0b.0: BAR 1: set to
[mem 0xe6064000-0xe60643ff] (PCI address [0xe6064000-0xe60643ff] pci
0000:00:03.0: BAR 1: assigned [io  0x8000-0x80ff] pci 0000:00:03.0: BAR 1: set
to [io  0x8000-0x80ff] (PCI address [0x8000-0x80ff] pci 0000:00:06.0: BAR 0:
assigned [io  0x8400-0x84ff] pci 0000:00:06.0: BAR 0: set to [io 
0x8400-0x84ff] (PCI address [0x8400-0x84ff] pci 0000:00:09.0: BAR 0: assigned
[io  0x8800-0x88ff] pci 0000:00:09.0: BAR 0: set to [io  0x8800-0x88ff] (PCI
address [0x8800-0x88ff] pci 0000:00:0b.0: BAR 0: assigned [io  0x8c00-0x8c7f]
pci 0000:00:0b.0: BAR 0: set to [io  0x8c00-0x8c7f] (PCI address
[0x8c00-0x8c7f] pci 0000:00:10.0: BAR 4: assigned [io  0x8c80-0x8c8f] pci
0000:00:10.0: BAR 4: set to [io  0x8c80-0x8c8f] (PCI address [0x8c80-0x8c8f]
pci 0000:01:05.0: BAR 1: assigned [mem 0xf0000000-0xffffffff pref] pci
0000:01:05.0: BAR 1: set to [mem 0xf0000000-0xffffffff pref] (PCI address
[0xf0000000-0xffffffff] pci 0000:01:05.0: BAR 0: assigned [mem
0xe4000000-0xe4ffffff] pci 0000:01:05.0: BAR 0: set to [mem
0xe4000000-0xe4ffffff] (PCI address [0xe4000000-0xe4ffffff] pci 0000:01:05.0:
BAR 2: assigned [mem 0xe5000000-0xe5ffffff] pci 0000:01:05.0: BAR 2: set to
[mem 0xe5000000-0xe5ffffff] (PCI address [0xe5000000-0xe5ffffff] pci
0000:01:05.0: BAR 6: assigned [mem 0xe8000000-0xe801ffff pref] pci
0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0:   bridge window [io  disabled]
pci 0000:00:01.0:   bridge window [mem 0xe4000000-0xe5ffffff]
pci 0000:00:01.0:   bridge window [mem 0xe8000000-0xffffffff pref]
bio: create slab <bio-0> at 0
vgaarb: device added: PCI:0000:01:05.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
raid6: int64x1    828 MB/s
raid6: int64x2   1084 MB/s
raid6: int64x4   1096 MB/s
raid6: int64x8    680 MB/s
raid6: using algorithm int64x4 (1096 MB/s) Switching to clocksource jiffies
NET: Registered protocol family 2
IP route cache hash table entries: 65536 (order: 6, 524288 bytes) TCP
established hash table entries: 262144 (order: 9, 4194304 bytes) TCP bind hash
table entries: 65536 (order: 6, 524288 bytes)
TCP: Hash tables configured (established 262144 bind 65536) TCP reno registered
UDP hash table entries: 1024 (order: 2, 32768 bytes) UDP-Lite hash table
entries: 1024 (order: 2, 32768 bytes)
NET: Registered protocol family 1
pci 0000:00:07.0: Activating ISA DMA hang workarounds Trying to unpack rootfs
image as initramfs...
Freeing initrd memory: 2295k freed
srm_env: version 0.0.6 loaded successfully
audit: initializing netlink socket (disabled) type=2000
audit(1268246795.169:1): initialized
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 8192 bytes) msgmni has been set
to 4043
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) io
scheduler noop registered io scheduler deadline registered io scheduler cfq
registered (default)
pci-stub: invalid id string ""
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Linux agpgart interface v0.103
[drm] Initialized drm 1.1.0 20060810
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
ÿserial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
brd: module loaded
nbd: registered device at major 43
Uniform Multi-Platform E-IDE driver
alim15x3 0000:00:10.0: IDE controller (0x10b9:0x5229 rev 0xc4)
alim15x3 0000:00:10.0: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0x8c80-0x8c87
    ide1: BM-DMA at 0x8c88-0x8c8f
ide0: not ready before the probe
ide1: no devices on the port
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
ide_generic: please use "probe_mask=0x3f" module parameter for probing all
legacy ISA IDE ports ide-gd driver 1.18 ide-cd driver 5.00 Unable to handle
kernel paging request at virtual address 036b036903670360
swapper(1): Oops -1
pc = [<036b036903670360>]  ra = [<fffffc00005cc35c>]  ps = 0000    Not tainted
v0 = 0000000000000001  t0 = 0000000000000001  t1 = 00000000000003ff
t2 = 0000000000000000  t3 = 0000000000000000  t4 = fffffc007f047a40
t5 = fffffc00007c7428  t6 = 000000000000000f  t7 = fffffc007f044000 s0 =
fffffc00007c7448  s1 = 000000000000036b  s2 = 000000000000036b
s3 = fffffc007f047a18  s4 = fffffc007f047a48  s5 = fffffc007e526000
s6 = fffffc00007c80e8
a0 = fffffc007e526000  a1 = fffffc007f047a48  a2 = 000000000000036b
a3 = fffffc007f047a18  a4 = fffffc007f047b68  a5 = 0000000000100100
t8 = fffffc007f004540  t9 = 0000000000000013  t10= fffffc007e4f76f0 t11=
fffffc007f004550  pv = 036b036903670361  at = 0000000000200200 gp =
fffffc000098ead0  sp = fffffc007f0478e8 Disabling lock debugging due to kernel
taint
Trace:
[<fffffc00005cd0a0>]
[<fffffc00005cc6dc>]
[<fffffc00005d705c>]
[<fffffc00005cd3ac>]
[<fffffc00005cbbe0>]
[<fffffc00005d6bd8>]
[<fffffc00005d6bc0>]
[<fffffc00005dc168>]
[<fffffc000050e9b8>]
[<fffffc00004f4d2c>]
[<fffffc00005748b0>]
[<fffffc000050ec78>]
[<fffffc000050eda0>]
[<fffffc000057906c>]
[<fffffc00005792f8>]
[<fffffc0000577694>]
[<fffffc0000579270>]
[<fffffc0000579370>]
[<fffffc00005781c0>]
[<fffffc0000579b8c>]
[<fffffc0000579b50>]
[<fffffc000050ea60>]
[<fffffc00005dc464>]
[<fffffc00003100cc>]
[<fffffc0000310fe8>]

Code:
Kernel panic - not syncing: Attempted to kill init!

-- 
Configure bugmail: http://bugzilla.kernel.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are watching the assignee of the bug.--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Bug 15503] insmod: error inserting '/lib/aic7xxx.ko': -1 Invalid modulkjournald starting

[bugzilla-daemon]

http://bugzilla.kernel.org/show_bug.cgi?id=15503





--- Comment #2 from Will L Givens <wlgivens@gmail.com>  2010-03-11 17:22:16 ---
Patched GCC to correct a scratch bug and rebuilt. Also upgraded binutils to
2-20.1... then I started receiving a GPREL 16 error. Went ahead and added
-Wl,--no-relax to my CFLAGS for the ENTIRE build, error still persists.

[root@jericho linux]# tail CONFIG_DEBUG_SECTION_MISMATCH.txt -n 75
  CC      lib/sha1.o
  CC      lib/show_mem.o
  CC      lib/string.o
  CC      lib/vsprintf.o
  AR      lib/lib.a
  CC [M]  lib/crc-ccitt.o
  CC [M]  lib/crc-itu-t.o
  CC [M]  lib/libcrc32c.o
  CC [M]  lib/ts_kmp.o
  CC [M]  lib/ts_bm.o
  CC [M]  lib/ts_fsm.o
  AS      arch/alpha/lib/callback_srm.o
  CC      arch/alpha/lib/checksum.o
  CC      arch/alpha/lib/csum_partial_copy.o
  AS      arch/alpha/lib/ev6-clear_page.o
  AS      arch/alpha/lib/ev6-clear_user.o
  AS      arch/alpha/lib/ev6-copy_page.o
  AS      arch/alpha/lib/ev6-copy_user.o
  AS      arch/alpha/lib/ev6-csum_ipv6_magic.o
  AS      arch/alpha/lib/ev6-memchr.o
  AS      arch/alpha/lib/ev6-memcpy.o
  AS      arch/alpha/lib/ev6-memset.o
  AS      arch/alpha/lib/ev6-strncpy_from_user.o
  AS      arch/alpha/lib/ev6-stxcpy.o
  AS      arch/alpha/lib/ev6-stxncpy.o
  AS      arch/alpha/lib/ev67-strcat.o
  AS      arch/alpha/lib/ev67-strchr.o
  AS      arch/alpha/lib/ev67-strlen.o
  AS      arch/alpha/lib/ev67-strlen_user.o
  AS      arch/alpha/lib/ev67-strncat.o
  AS      arch/alpha/lib/ev67-strrchr.o
  CC      arch/alpha/lib/fls.o
  CC      arch/alpha/lib/fpreg.o
  AS      arch/alpha/lib/memmove.o
  CC      arch/alpha/lib/srm_printk.o
  CC      arch/alpha/lib/srm_puts.o
  AS      arch/alpha/lib/strcpy.o
  AS      arch/alpha/lib/strncpy.o
  CC      arch/alpha/lib/udelay.o
  AR      arch/alpha/lib/lib.a
  LD      vmlinux.o
  MODPOST vmlinux.o
WARNING: vmlinux.o(__ksymtab+0x66e0): Section mismatch in reference from the
variable __ksymtab_pci_register_set_vga_state to the function
.init.text:pci_register_set_vga_state()
The symbol pci_register_set_vga_state is exported and annotated __init
Fix this by removing the __init annotation of pci_register_set_vga_state or
drop the export.

  GEN     .version
  CHK     include/generated/compile.h
  UPD     include/generated/compile.h
  CC      init/version.o
  LD      init/built-in.o
  LD      vmlinux
fs/built-in.o: In function `_d_rehash':
(.text+0x15378): relocation truncated to fit: GPREL16 against `.sbss'
fs/built-in.o: In function `d_move_locked':
(.text+0x16ee4): relocation truncated to fit: GPREL16 against `.sbss'
fs/built-in.o: In function `__d_lookup':
(.text+0x177ec): relocation truncated to fit: GPREL16 against `.sbss'
fs/built-in.o: In function `d_validate':
(.text+0x17bd8): relocation truncated to fit: GPREL16 against `.sbss'
fs/built-in.o: In function `hash':
(.text+0x182cc): relocation truncated to fit: GPREL16 against `.sbss'
fs/built-in.o: In function `hash':
(.text+0x182d0): relocation truncated to fit: GPREL16 against `.sbss'
fs/built-in.o: In function `inode_add_to_lists':
(.text+0x18348): relocation truncated to fit: GPREL16 against `.sbss'
fs/built-in.o: In function `__insert_inode_hash':
(.text+0x18408): relocation truncated to fit: GPREL16 against `.sbss'
fs/built-in.o: In function `insert_inode_locked4':
(.text+0x18c5c): relocation truncated to fit: GPREL16 against `.sbss'
fs/built-in.o: In function `insert_inode_locked':
(.text+0x18d80): relocation truncated to fit: GPREL16 against `.sbss'
fs/built-in.o: In function `ilookup':
(.text+0x19004): additional relocation overflows omitted from the output
make: *** [vmlinux] Error 1
[root@jericho linux]#

-- 
Configure bugmail: http://bugzilla.kernel.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are watching the assignee of the bug.

[Bug 15503] insmod: error inserting '/lib/aic7xxx.ko': -1 Invalid modulkjournald starting

[bugzilla-daemon]

http://bugzilla.kernel.org/show_bug.cgi?id=15503





--- Comment #3 from Will L Givens <wlgivens@gmail.com>  2010-03-12 06:09:37 ---
Welp, back again. Tried adding -Wl,--no-relax to the CFLAGS... received the
same error. Then turned around and downgraded build tools a bit, thinking they
might be too new. Rebuilt with gcc-4.3.4 and Binutils-2.17. Got to the very end
and received an error msg that LD didn't recognized the option '--build-id'.

Removed the 'offending' string from the linker options and tried once more, and
received a slightly different error msg:

  IHEX2FW firmware/keyspan/usa28xb.fw
  AS      firmware/keyspan/usa28xb.fw.gen.o
  IHEX2FW firmware/keyspan/usa28x.fw
  AS      firmware/keyspan/usa28x.fw.gen.o
  IHEX2FW firmware/keyspan/usa49w.fw
  AS      firmware/keyspan/usa49w.fw.gen.o
  IHEX2FW firmware/keyspan/usa49wlc.fw
  AS      firmware/keyspan/usa49wlc.fw.gen.o
  LD      firmware/built-in.o
  LD      vmlinux.o
  MODPOST vmlinux.o
WARNING: modpost: Found 1 section mismatch(es).
To see full details build your kernel with:
'make CONFIG_DEBUG_SECTION_MISMATCH=y'
  GEN     .version
  CHK     include/generated/compile.h
  UPD     include/generated/compile.h
  CC      init/version.o
  LD      init/built-in.o
  LD      vmlinux
fs/built-in.o: In function `ep_unregister_pollwait':
(.text+0x3c444): relocation truncated to fit: GPREL16 against `.sbss'
fs/built-in.o: In function `ep_ptable_queue_proc':
(.text+0x3d228): relocation truncated to fit: GPREL16 against `.sbss'
fs/built-in.o: In function `anon_inode_getfile':
(.text+0x3d4d0): relocation truncated to fit: GPREL16 against `.sbss'
fs/built-in.o: In function `anon_inode_getfile':
(.text+0x3d564): relocation truncated to fit: GPREL16 against `.sbss'
fs/built-in.o: In function `anon_inode_getfile':
(.text+0x3d588): relocation truncated to fit: GPREL16 against `.sbss'
fs/built-in.o: In function `anon_inode_getfile':
(.text+0x3d5a4): relocation truncated to fit: GPREL16 against `.sbss'
fs/built-in.o: In function `anon_inode_getfile':
(.text+0x3d608): relocation truncated to fit: GPREL16 against `.sbss'
fs/built-in.o: In function `ctx_rcu_free':
(.text+0x3f64c): relocation truncated to fit: GPREL16 against `.sbss'
fs/built-in.o: In function `ctx_rcu_free':
(.text+0x3f66c): relocation truncated to fit: GPREL16 against symbol `aio_nr'
defined in .sbss section in fs/built-in.o
fs/built-in.o: In function `ctx_rcu_free':
(.text+0x3f694): relocation truncated to fit: GPREL16 against symbol `aio_nr'
defined in .sbss section in fs/built-in.o
fs/built-in.o: In function `really_put_req':
(.text+0x3f718): additional relocation overflows omitted from the output
make: *** [vmlinux] Error 1
[root@jericho linux]#

-- 
Configure bugmail: http://bugzilla.kernel.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are watching the assignee of the bug.

[Bug 15503] insmod: error inserting '/lib/aic7xxx.ko': -1 Invalid modulkjournald starting

[bugzilla-daemon]

http://bugzilla.kernel.org/show_bug.cgi?id=15503





--- Comment #4 from Will L Givens <wlgivens@gmail.com>  2010-03-16 02:29:03 ---
Created an attachment (id=25542)
 --> (http://bugzilla.kernel.org/attachment.cgi?id=25542)
Found a patch for the 'section mismatch'

-- 
Configure bugmail: http://bugzilla.kernel.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are watching the assignee of the bug.

[Bug 15503] insmod: error inserting '/lib/aic7xxx.ko': -1 Invalid modulkjournald starting

[bugzilla-daemon]

http://bugzilla.kernel.org/show_bug.cgi?id=15503





--- Comment #5 from Will L Givens <wlgivens@gmail.com>  2010-03-16 17:58:00 ---
In order to get around all the GPREL16 errors, I simply removed the offending
drives from the kernel and config'd them to be compile separately as modules.
Than after having to create a new init ram disk, I receive a slightly different
error in regards to the Adaptec (aic7xxx) driver:

usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
oprofile: using alpha/ev67 performance monitoring.
TCP cubic registered
rtc-test rtc-test.0: setting system clock to 2010-03-16 17:26:39 UTC
(1268760399)
Freeing unused kernel memory: 208k freed
Red Hat nash version 5.0.32 starting
Mounting proc filesystem
Mounting sysfs filesystem
Creating /dev
Creating initial device nodes
Setting up hotplug.
Creating block device nodes.
Loading aic7xxx.Unable to handle kernel paging request at virtual address
036b036903670360
ko module
insmod(375): Oops -1
pc = [<036b036903670360>]  ra = [<fffffffc0089c9d8>]  ps = 0000    Not
tainted
v0 = 0000000000000001  t0 = 0000000000000001  t1 = 00000000000003ff
t2 = 0000000000000000  t3 = 0000000000000000  t4 = fffffc007d9c7a20
t5 = fffffffc008acc70  t6 = 000000000000000f  t7 = fffffc007d9c4000
s0 = fffffffc008acc90  s1 = 000000000000036b  s2 = 000000000000036b
s3 = fffffc007d9c79f8  s4 = fffffc007d9c7a28  s5 = fffffc007da1bc00
s6 = fffffffc008ad930
a0 = fffffc007da1bc00  a1 = fffffc007d9c7a28  a2 = 000000000000036b
a3 = fffffc007d9c79f8  a4 = fffffc007d9c7b48  a5 = fffffffc0089b434
t8 = fffffc00009001d0  t9 = 0000000000000002  t10= 0000000000000000
t11= 0000000000000001  pv = 036b036903670361  at = 00000000ffffffff
gp = fffffffc008ad7e0  sp = fffffc007d9c78c8
Disabling lock debugging due to kernel taint
Trace:
[<fffffc0000539cec>]
[<fffffc0000520504>]
[<fffffc000059f264>]
[<fffffc0000539fac>]
[<fffffc000053a0d4>]
[<fffffc00005a3a48>]
[<fffffc00005a3cd4>]
[<fffffc00005a2070>]
[<fffffc00005a3c4c>]
[<fffffc00005a3d4c>]
[<fffffc00005a2b9c>]
[<fffffc00005a4568>]
[<fffffc00005a452c>]
[<fffffc0000539d94>]
[<fffffc00003100cc>]
[<fffffc0000351454>]
[<fffffc0000310bb4>]

Code:
Loading dm-log.ko module
Loading dm-region-hash.ko module
Loading dm-mirror.ko module
Loading dm-snapshot.ko module
Making device-mapper control node
Scanning logical volumes
  Reading all physical volumes.  This may take a while...
  No volume groups found
Activating logical volumes
  Unable to find volume group "VolGroup00"
Creating root device.
Mounting root filesystem.
mount: could not find filesystem '/dev/root'
Setting up other filesystems.
Setting up new root fs
setuproot: moving /dev failed: No such file or directory
no fstab.sys, mounting internal defaults
setuproot: error mounting /proc: No such file or directory
setuproot: error mounting /sys: No such file or directory
Switching to new root and running init.
unmounting old /dev
unmounting old /proc
unmounting old /sys
switchroot: mount failed: No such file or directory
Kernel panic - not syncing: Attempted to kill init!

-- 
Configure bugmail: http://bugzilla.kernel.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are watching the assignee of the bug.

[Bug 15503] insmod: error inserting '/lib/aic7xxx.ko': -1 Invalid modulkjournald starting

[bugzilla-daemon]

http://bugzilla.kernel.org/show_bug.cgi?id=15503


Will L Givens <wlgivens@gmail.com> changed:

           What    |Removed                     |Added
----------------------------------------------------------------------------
             Status|NEW                         |RESOLVED
         Resolution|                            |CODE_FIX




--- Comment #6 from Will L Givens <wlgivens@gmail.com>  2010-03-18 23:05:07 ---
Kernel-2.6.33 seem to build without issue with a couple of patches and from the
looks of things, aka lack of complaints, appear to be pretty much an Alpha
related coding problem.

Linux jericho.southkc.net 2.6.33 #2 Thu Mar 18 17:30:33 CDT 2010 alpha alpha
alpha GNU/Linux


[root@jericho src]# gcc-4.3.4 -v
Using built-in specs.
Target: alphaev67-alpha-linux
Configured with: ../gcc-4.3.4/configure --build=alphaev67-alpha-linux
--host=alphaev67-alpha-linux --program-suffix=-4.3.4 --prefix=/usr
--mandir=/usr/share/man --infodir=/usr/share/info --enable-shared
--enable-threads=posix --enable-checking=release --with-system-zlib
--enable-__cxa_atexit --disable-libunwind-exceptions --enable-libgcj-multifile
--enable-languages=c,c++,objc,obj-c++,java,fortran --disable-dssi
--with-java-home=/usr/lib/jvm/java-1.4.2-gcj-1.4.2.0/jre --with-long-double-128
Thread model: posix
gcc version 4.3.4 (GCC)

[root@jericho src]# as -v
GNU assembler version 2.20.1 (alphaev5-alpha-linux) using BFD version (GNU
Binutils) 2.20.1.20100303

-- 
Configure bugmail: http://bugzilla.kernel.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are watching the assignee of the bug.