[Bug 198975] Highpoint 840A RocketRAID Controller and drives are NOT detected by SCSI_HPTIOP kernel module

[bugzilla-daemon@kernel.org]

https://bugzilla.kernel.org/show_bug.cgi?id=198975

Jaym12 (allhddcoumputer@gmail.com) changed:

           What    |Removed                     |Added
----------------------------------------------------------------------------
                 CC|                            |allhddcoumputer@gmail.com

--- Comment #7 from Jaym12 (allhddcoumputer@gmail.com) ---
I fixed this error(In reply to Matthias Lippert from comment #0)
> Hello,
> 
> This is my first kernel bugzilla report, so please have mercy ;-)
> 
> My freshly bought Highpoint 840A RocketRAID Controller and its 8 connected
> "Samsung 860 EVO" ssd harddrives are NOT detected by the "SCSI_HPTIOP"
> kernel low-level scsi driver module, but it seems to be the smaller brother
> of the already from kernel supported 3740A RocketRAID controller by
> Highpoint.
> The only differnence seems to be that the 840A supports only 6Gb/s per
> channel.
> Thats is also confirmed by the top down view onto the expansion card.
> In the upper right corner you can see the described dual product markings
> "RocketRAID 3740A/840A", so the layout and most likely also the raid
> processor of the controller has been used at least twice by Highpoint.
> My controllers firmware is the recent 1.0.0 version.
> I couldnt find any other driver module that is matching my controller more
> closely.
> The current published linux drivers by highpoint are useless under (Gentoo)
> Linux.
> The controller and its connected drives are working flawlessy under Windows
> 10, so its not damaged. I am using a "Gigabyte X99-SLI" motherboard with
> recent F24a bios version.
> I am also willingly able to provide regular dump logs to kernel developers
> for driver debugging.
> 
> I would be VERY thankful for including support into the next kernel for this
> cool piece of hardware!
> 
> 
> Top-down view onto the expansion card:
> 
> https://www.bhphotovideo.com/images/images1000x1000/
> highpoint_rocketraid_3740a_12gb_s_pcie_1269779.jpg
> 
> 
> dmesg outputs only this, then nothing else related to my controller:
> 
> RocketRAID 3xxx/4xxx Controller driver v1.10.0
> 
> 
> lspci -kvv outputs this:
> 
> 02:00.0 RAID bus controller: HighPoint Technologies, Inc. Device 0840 (rev
> a1)
>         Subsystem: HighPoint Technologies, Inc. Device 0000
>         Physical Slot: 6
>         Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR+ FastB2B- DisINTx-
>         Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
>         Latency: 0, Cache Line Size: 32 bytes
>         Interrupt: pin A routed to IRQ 11
>         NUMA node: 0
>         Region 0: Memory at d0900000 (64-bit, prefetchable) [size=1M]
>         Region 4: Memory at d0a00000 (64-bit, prefetchable) [size=256K]
>         Expansion ROM at dfe00000 [disabled] [size=128K]
>         Capabilities: [80] Power Management version 3
>                 Flags: PMEClk- DSI- D1+ D2- AuxCurrent=0mA
> PME(D0+,D1+,D2-,D3hot+,D3cold-)
>                 Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
>         Capabilities: [90] MSI: Enable- Count=1/32 Maskable+ 64bit+
>                 Address: 0000000000000000  Data: 0000
>                 Masking: 00000000  Pending: 00000000
>         Capabilities: [b0] MSI-X: Enable- Count=18 Masked-
>                 Vector table: BAR=0 offset=00038000
>                 PBA: BAR=0 offset=00039000
>         Capabilities: [c0] Express (v2) Endpoint, MSI 00
>                 DevCap: MaxPayload 512 bytes, PhantFunc 0, Latency L0s
> <128ns, L1 <2us
>                         ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
> SlotPowerLimit 0.000W
>                 DevCtl: Report errors: Correctable- Non-Fatal- Fatal-
> Unsupported-
>                         RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
>                         MaxPayload 256 bytes, MaxReadReq 512 bytes
>                 DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr-
> TransPend-
>                 LnkCap: Port #0, Speed 8GT/s, Width x8, ASPM L0s L1, Exit
> Latency L0s <128ns, L1 <2us
>                         ClockPM- Surprise- LLActRep- BwNot- ASPMOptComp+
>                 LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk-
>                         ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
>                 LnkSta: Speed 8GT/s, Width x8, TrErr- Train- SlotClk-
> DLActive- BWMgmt- ABWMgmt-
>                 DevCap2: Completion Timeout: Range B, TimeoutDis+, LTR-,
> OBFF Not Supported
>                 DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-,
> LTR-, OBFF Disabled
>                 LnkCtl2: Target Link Speed: 8GT/s, EnterCompliance- SpeedDis-
>                          Transmit Margin: Normal Operating Range,
> EnterModifiedCompliance- ComplianceSOS-
>                          Compliance De-emphasis: -6dB
>                 LnkSta2: Current De-emphasis Level: -6dB,
> EqualizationComplete+, EqualizationPhase1+
>                          EqualizationPhase2+, EqualizationPhase3+,
> LinkEqualizationRequest-
>         Capabilities: [100 v2] Advanced Error Reporting
>                 UESta:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt-
> RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
>                 UEMsk:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt-
> RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
>                 UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt-
> RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
>                 CESta:  RxErr- BadTLP- BadDLLP- Rollover- Timeout-
> NonFatalErr-
>                 CEMsk:  RxErr- BadTLP- BadDLLP- Rollover- Timeout-
> NonFatalErr+
>                 AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+
> ChkEn-
>         Capabilities: [300 v1] #19
> 
> 
> Highpoints 800er series RocketRAID website:
> 
> http://www.highpoint-tech.com/USA_new/series-rr800-overview.htm
> 
> 
> Highpoints 3700er series RocketRAID website:
> 
http://www.highpoint-tech.com/USA_new/series-rr3700-overview.htm

> I have been facing the same issue.
> https://www.allhdd.com/seagate-st3000lm024-sata-6gbps-hdd/

-- 
You may reply to this email to add a comment.

You are receiving this mail because:
You are watching the assignee of the bug.