From mboxrd@z Thu Jan 1 00:00:00 1970
From: bugzilla-daemon@bugzilla.kernel.org
Subject: [Bug 85101] hpsa + P410 does not show connected HP SAS port
expanders
Date: Wed, 24 Sep 2014 22:32:13 +0000
Message-ID:
References:
Mime-Version: 1.0
Content-Type: text/plain; charset="UTF-8"
Content-Transfer-Encoding: 7bit
Return-path:
Received: from mail.kernel.org ([198.145.19.201]:42818 "EHLO mail.kernel.org"
rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP
id S1750871AbaIXWcP (ORCPT );
Wed, 24 Sep 2014 18:32:15 -0400
Received: from mail.kernel.org (localhost [127.0.0.1])
by mail.kernel.org (Postfix) with ESMTP id A23E02028D
for ; Wed, 24 Sep 2014 22:32:14 +0000 (UTC)
Received: from bugzilla2.web.kernel.org (bugzilla2.web.kernel.org [172.20.200.52])
by mail.kernel.org (Postfix) with ESMTP id 4220220274
for ; Wed, 24 Sep 2014 22:32:13 +0000 (UTC)
In-Reply-To:
Sender: linux-scsi-owner@vger.kernel.org
List-Id: linux-scsi@vger.kernel.org
To: linux-scsi@vger.kernel.org
https://bugzilla.kernel.org/show_bug.cgi?id=85101
--- Comment #3 from Robert Elliott ---
Controller lockup means the firmware crashed (e.g. an ASSERT statement
triggered). That can be due to hardware problems or firmware bugs. You might
see if it boots with nothing attached; then with one expander; then with two;
then with drives attached to the expanders.
If you're not really using the P410, though, just use sg_write_buffer through
the Adaptec 7805H HBA.
--
You are receiving this mail because:
You are watching the assignee of the bug.