From: bugzilla-daemon@bugzilla.kernel.org
To: linux-scsi@vger.kernel.org
Subject: [Bug 85101] New: hpsa + P410 does not show connected HP SAS port expanders
Date: Wed, 24 Sep 2014 16:46:18 +0000 [thread overview]
Message-ID: <bug-85101-11613@https.bugzilla.kernel.org/> (raw)
https://bugzilla.kernel.org/show_bug.cgi?id=85101
Bug ID: 85101
Summary: hpsa + P410 does not show connected HP SAS port
expanders
Product: SCSI Drivers
Version: 2.5
Kernel Version: 3.17
Hardware: x86-64
OS: Linux
Tree: Mainline
Status: NEW
Severity: normal
Priority: P1
Component: Other
Assignee: scsi_drivers-other@kernel-bugs.osdl.org
Reporter: linux-ide@crashplan.pro
Regression: No
ASRock H81 + Intel Celeron G1840
HP P410, firmware 6.60
HP SAS Expander, firmware 2.08
In the need for upgrading the firmware on the HP SAS expanders, the HP P410 is
attached to this setup. However it does not see the any of the two connected HP
SAS expander cards, only the boot drive and P410 are shown in the lsscsi
output.
Steps to reproduce:
1. blacklist hpsa
2. reboot
3. modprobe -v hpsa
4. lsscsi
# lsscsi
[0:0:0:0] disk ATA OCZ-VERTEX 1.3 /dev/sda
[4:3:0:0] storage HP P410 6.60 -
# modprobe -v hpsa dmesg:
[ 49.567169] HP HPSA Driver (v 3.4.4-1)
[ 49.567251] hpsa 0000:01:00.0: can't disable ASPM; OS doesn't have ASPM
control
[ 49.567389] hpsa 0000:01:00.0: enabling device (0000 -> 0003)
[ 49.567576] hpsa 0000:01:00.0: MSIX
[ 49.567649] hpsa 0000:01:00.0: irq 30 for MSI/MSI-X
[ 49.567705] hpsa 0000:01:00.0: irq 31 for MSI/MSI-X
[ 49.567799] hpsa 0000:01:00.0: Logical aborts not supported
[ 49.587966] hpsa 0000:01:00.0: hpsa0: <0x323a> at IRQ 30 using DAC
[ 55.125143] scsi host4: hpsa
[ 55.129439] hpsa 0000:01:00.0: RAID device c4b3t0l0 added.
[ 55.129832] scsi 4:3:0:0: RAID HP P410 6.60
PQ: 0 ANSI: 5
[ 55.130585] scsi 4:3:0:0: Attached scsi generic sg1 type 12
Regression:
1. changed back to kernel 3.13: no difference
2. disconnect all other SAS (to SATA) cables: no difference
3. attach only one HP SAS expander: no difference
4. switch cable between P410 and SAS expander card: no differnce
5. replace HP P410 (and cables) with Adapter 7805H or Marvell 88SE9485 SAS/SATA
6Gb/s controller [1b4b:9485]: HP SAS expanders are shown
--
You are receiving this mail because:
You are watching the assignee of the bug.
next reply other threads:[~2014-09-24 16:46 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-09-24 16:46 bugzilla-daemon [this message]
2014-09-24 18:22 ` [Bug 85101] hpsa + P410 does not show connected HP SAS port expanders bugzilla-daemon
2014-09-24 21:33 ` bugzilla-daemon
2014-09-24 22:32 ` bugzilla-daemon
2014-09-25 10:48 ` bugzilla-daemon
2014-09-25 10:49 ` bugzilla-daemon
2014-09-25 14:05 ` bugzilla-daemon
2014-09-25 22:22 ` bugzilla-daemon
2014-09-25 22:35 ` bugzilla-daemon
2014-09-25 22:42 ` bugzilla-daemon
2014-10-01 21:59 ` bugzilla-daemon
2023-11-08 9:42 ` bugzilla-daemon
2025-09-18 9:57 ` bugzilla-daemon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=bug-85101-11613@https.bugzilla.kernel.org/ \
--to=bugzilla-daemon@bugzilla.kernel.org \
--cc=linux-scsi@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).